Divisions of Engineered Solutions

About
Hy-Tech started manufacturing air tool parts in Pittsburgh, PA in
Super Duty Industrial
1923. Our products under the brand names of ATP, ATSCO, Ozat,
Pneumatic Tools,
Parts and Accessories Thor and Thaxton are sold in the U.S. and international markets.
Since 1923
We manufacture over 20,000 replacement parts offering the highest
quality alternative to OEM parts and tools for many recognized
brand names such as Ingersoll Rand, Chicago Pneumatic, Cleco,
Top Cat and others. All parts and Ozat sockets, striking wrenches
Super Duty Metal and accessories are backed by our lifetime warranty against defects
Finishing Products
in material and workmanship. Our tools have a one year warranty
Since 1957
against defects in material and workmanship.

Hy-Tech’s manufacturing capabilities include the following:

• Specialize in small to mid-size precision component manufacturing
• 5-axis machining capability
Super Strength Impact
Sockets, Striking Wrenches
• A combination of 100 CNC and manual machines
and Accessories • In house gear design with cutting, broaching, shaping, and
Since 1969 hobbing capabilities
• 3D solid modeling design software
R

• Dynamometer for motor performance testing

• In house certified welding capabilities
• High capability vendors for heat treating, plating, and castings
Legendary Construction
Air Tools Since 1886
(sand, investment, and die) within a 90 mile radius of our plant
• Full turn key supplier capabilities

Additional company information can be viewed at www.hy-techinc.com

High Pressure
Hydrostatic Test Plugs
thaxtonplugs.com

25 Leonberg Road • Cranberry Township, PA 16066

Phone: 1-800-245-1148 • Fax: 724-776-0227
 R

AIR TOOLS AIR GRINDERS IMPACT SOCKETS TEST PLUGS CUSTOM GEARS

Product Contents
ATP Impact Tools 1
Super Duty 1/2”, 3/4”, 1”, 1-1/2”, 2-1/2”,
3-1/2”, #4 & #5 Spline Models

ATP and ATSCO Abrasive Tools 10

Die Grinders & Angle Grinders
Large Vertical and Horizontal Grinders

ATP and ATSCO Percussive Tools 18

Chipping Hammers, Rammers and Scalers

Thor Construction Tools 23

Paving Breakers, Clay Diggers, Rivet Busters
and Backfill Tampers,

ATP Industrial Air Products 26

Centrifugal Sump Pump, Hoists, Drills,
Air Motors

ATP Air Ventilators 32

Jet Air Fan and Venturi “Air Horns”

Air Tool Accessories 34

Blue Magic Oil, Pure Gold Grease, In-line
Oilers, Whip Hoses, Moisture Separator,
Couplings, Replacement Parts, Tune-up Kits

Ozat 40
1/2” to 3-1/2” Square Drive Impact Sockets
#4 & #5 Spline Drive Sockets
Adapters, Universals, Extensions & Ret Rings
Hex Driver Sockets; 1 Piece & 2 Part Inhex
Flat & Offset Striking Wrenches
Torque Multipliers

Thaxton 88
High Pressure Hydrostatic Test Plugs

Quality Gear 91
Custom Gear Manufacturing
The World’s Most Extensive Line of Super Duty Impact Tools
Impact tools provide rotary motion from an air motor to an impact mechanism, delivering a series of impacting blows to apply
torque to a threaded fastener.

Impact tools do not transmit torque reaction back to the operator enabling fasteners to be safely tightened to high torque
values. Torque output is determined by the size of the tool, air pressure and SCFM, and the length of time the tool is
impacting on the fastener.

Impact Tool Applications

Impact tools are used in applications in refineries, petrochemical plants, power generation plants, railroads, paper mills, heavy
off-road equipment repair, mining, steel mills, steel fabrication and structural steel erection.

ATP Impact Mechanism / Clutch Basics

Twin Hammer:
Twin hammers strike balanced blows for more torque per pound than other mechanism designs. This simplified design performs
well on both hard and soft draw applications, is less sensitive to air pressure changes, and has lower cost of maintenance.

End Grip
Single “Jumbo” Hammer: Outside Trigger
Lever Throttle
The single hammer mechanism performs similarly to the Twin Hammer,
but uses a single hammer in operation.

Ball and Cam:

The precision ball and cam mechanism used in larger high output impact
tools delivers powerful rotary impacts for for high output and durability,
and is ideal for soft draw applications.

Two Jaw:
The two jaw clutch delivers high energy per blow torque output with a Pistol Grip
high power to weight ratio. Excellent choice for tough MRO and
End Grip
assembly applications. Very good on soft and hard draw applications. Inside Trigger

Model Nomenclature References:

PT = Pistol Grip/Trigger TH = Through Hole Square Drive
EI = End Grip/Inside Trigger 5S = 5 Spline
EO = End Grip/Outside Trigger RR = Ring Retainer
LT = Lever Throttle 1H = 1” Square Through Hole

Example:
ATP 7560PT-TH = 3/4” drive, pistol grip, through hole anvil.

Where Impact Tool Models are Referenced: Square Drive

Spline Drive
• CP is a registered trademark of Chicago Pneumatic
• IR is a registered trademark of Ingersoll Rand

| 1 | 1.800.245.1148 www.onlineatp.com
 Impact Tool Selection Guide
The Best Impact Tools are Easy to Choose
The impact tool selection guide makes it easy to choose the correct tool for your applications.

1/2” - 3/4” Bolt Capacity (16mm - 19mm)

Model Series
Torque Range ft lb (Nm)* Page
50PT 275 (373) - 450 (610) 3
7577 800 (1,085) - 1,100 (1,898) 3
7560 560 (760) - 1,000 (1,356) 3
7520 800 (1,085) - 1,100 (1,491) 3
7525 1,100 (1,492) - 1,450 (1,966) 3

1” - 1 3/8” Bolt Capacity (25mm - 35mm)

Model Series
Torque Range ft lb (Nm)* Page
1011 1,800 (2,440) - 2,800 (3,796) 4
1012 1,000 (1,356) - 1,500 (2,034) 4
1017 1,000 (1,356) - 1,600 (2,169) 4
1034 1,100 (1,491) - 1,600 (2,169) 5
1034B9 500 (678) - 750 (1,000) 5
1040 1,600 (2,169) - 2,000 (2,711) 5
1093 1,000 (1,356) - 1,800 (2,440) 5
1041 1,650 (2,240) - 2,500 (3,390) 6
1042 1,900 (2,576) - 3,200 (4,338) 6

1 3/8” - 1 1/2” Bolt Capacity (35mm - 38mm)

Model Series
Torque Range ft lb (Nm)* Page
1550 2,500 (3,400) - 3,000 (4,067) 7
1552 3,300 (4,474) - 4,000 (5,424) 7
1520 2,500 (3,400) - 3,000 (4,067) 7

1 1/2” - 4” Bolt Capacity (38mm - 102mm)

Model Series
Torque Range ft lb (Nm)* Page
1578 5,500 (7,456) - 10,000 (13,560) 8
1580 5,900 (8,000) - 13,560 (18,383) 8
2582 10,000 (13,560) - 20,000 (27,114) 8
2588 25,000 (33,892) - 50,000 (67,784) 8
3599 42,000 (57,000) - 80,000 (108,500) 8
* Torque Range = Working Torque - Max Torque

1.800.245.1148 www.onlineatp.com | 2 |
Super Duty 1/2” & 3/4”
Class Impact Tools
3/4” models available with 1” and #4 Spline Drives

50PT-PR 7577PT-TH

7520PT-IH 7525PT-TH
7560PT-TH

1/2” - 3/4” Bolt Capacity (16mm - 19mm)

Models Working Torque Max Torque Handle Drive Socket Length Weight Air Inlet / Equivalent
ft lb (Nm) ft lb (Nm) Type Size Retainer in lb Hose ID in (mm) To
50PT-PR 275 (373) 450 (610) Pistol Grip 1/2” Sq. Pin & Ring Combo 6.8 5.6 1/4 NPT 3/8 (10) IR2707P1
7577PT-TH 700 (949) 1,100 (1,491) Pistol Grip 3/4” Sq. Hole & Ring Combo 8.25 10 3/8 NPT 1/2 (13) 777A
7560PT-TH 560 (760) 1,000 (1,356) Pistol Grip 3/4” Sq. Through Hole 7.6 11.6 3/8 NPT 1/2 (13) CP6060-SASAB
7560PT-1H 575 (780) 1,025 (1,389) Pistol Grip 1” Sq. Through Hole 7.6 11.7 3/8 NPT 1/2 (13) CP6060-SASAK
7560PT-RR 560 (760) 1,000 (1,356) Pistol Grip 3/4” Sq. Ring Retainer 7.6 11.6 3/8 NPT 1/2 (13) CP6060-SASAR
7560PT-4S 575 (780) 1,025 (1,389) Pistol Grip #4 Spline Button 7.6 11.7 3/8 NPT 1/2 (13) CP6060-SASAL
7520PT-TH 800 (1,085) 1,100 (1,491) Pistol Grip 3/4” Sq. Through Hole 12.5 12 3/8 NPT 1/2 (13) IR2920P1
7520PT-1H 800 (1,085) 1,100 (1,491) Pistol Grip 1” Sq. Through Hole 12.5 12 3/8 NPT 1/2 (13) IR2920P3
7525PT-TH 1,100 (1,492) 1,450 (1,966) Pistol Grip 3/4” Sq. Through Hole 8.9 12.5 3/8 NPT 1/2 (13) IR2925P1Ti
7525PT-1H 1,100 (1,492) 1,450 (1,966) Pistol Grip 1” Sq. Through Hole 8.9 12.5 3/8 NPT 1/2 (13) IR2925P3Ti
7525RB-TH* 1,400 (1,898) 1,600 (2,169) rev Pistol Grip 3/4” Sq. Through Hole 8.9 12.5 3/8 NPT 1/2 (13) IR2925RBP1Ti
7525RB-1H* 1,400 (1,898) 1,600 (2,169) rev Pistol Grip 1” Sq. Through Hole 8.9 12.5 3/8 NPT 1/2 (13) IR2925RBP3Ti
7525PT-4S 1,100 (1,492) 1,450 (1,966) Pistol Grip #4 Spline Button 8.9 12.5 3/8 NPT 1/2 (13) IR2925P/#4 Spline

* Reverse Bias Power Models. All models available with extended anvil. Contact ATP Customer Service for more information.
See Ozat Sockets starting on page 40. Socket retaining accessories are provided for all sockets in the Ozat section.

| 3 | 1.800.245.1148 www.onlineatp.com
Super Duty 1” Drive Class Impact Tools
Available with #5 Spline Drive
1011 Series
• Two jaw clutch transfers high power
• Three piece housing for ease of repair
• Steel housing clutch design
• Integral muffler for noise reduction
• Great power to weight ratio
• Great for hard and soft draw applications

1011PT-TH
1012 & 1017 Series
• High durability single Jumbo hammer mechanism
• Steel hammer case
• Bronze end plates for increased motor durability
• Integrated muffler for noise reduction
• Three piece housing for ease of repair

1011EI-5S

1” - 1-3/8” Bolt Capacity (25mm - 35mm)

Models Working Torque Max Torque Handle Drive Socket Length Weight Air Inlet / Equivalent
ft lb (Nm) ft lb (Nm) Type Size Retainer in lb Hose ID in (mm) To
1011PT-TH 1,800 (2,440) 2,800 (3,796) Pistol Grip 1” Sq. Through Hole 10.7 23.1 1/2 NPT 3/4 (19) CP0611-PRS
1011PT-5S 1,800 (2,440) 2,800 (3,796) Pistol Grip #5 Spline Button 10.7 23.1 1/2 NPT 3/4 (19) CP0611
1011EI-TH 1,800 (2,440) 2,800 (3,796) End Grip I-T 1” Sq. Through Hole 12.5 22.5 1/2 NPT 3/4 (19) CP0611-PASED
1011EO-TH 1,800 (2,440) 2,800 (3,796) End Grip O-T 1” Sq. Through Hole 12.5 22.5 1/2 NPT 3/4 (19) CP0611-GASED
1011EI-5S 1,800 (2,440) 2,800 (3,796) End Grip I-T #5 Spline Button 12.5 22.5 1/2 NPT 3/4 (19) CP0611-PASEL
1011EO-5S 1,800 (2,440) 2,800 (3,796) End Grip O-T #5 Spline Button 12.5 22.5 1/2 NPT 3/4 (19) CP0611-GASEL
1012EI-TH 1,000 (1,356) 1,500 (2,034) End Grip I-T 1” Sq. Through Hole 11.25 19 1/2 NPT 3/4 (19) IR1712B2
1012EO-TH 1,000 (1,356) 1,500 (2,034) End Grip O-T 1” Sq. Through Hole 11.25 19 1/2 NPT 3/4 (19) IR1712A2
1017EI-5S 1,000 (1,356) 1,600 (2,169) End Grip I-T #5 Spline Button 11.25 19 1/2 NPT 3/4 (19) IR1734B1
1017EO-5S 1,000 (1,356) 1,600 (2,169) End Grip O-T #5 Spline Button 11.25 19 1/2 NPT 3/4 (19) IR1734A1

All models available with extended anvil. Contact ATP Customer Service for more information.
See Ozat Sockets starting on page 40. Socket retaining accessories are provided for all sockets in the Ozat section.

1.800.245.1148 www.onlineatp.com | 4 |
Super Duty 1” Drive Class Impact Tools
Available with #5 Spline Drive

1034 & 1040 Series

• High output twin hammer mechanisms
• Bronze end plates for increased motor durability
1034EI-THB9
• Integral muffler for noise reduction
• Steel hammer case
• Three piece housing for ease of repair
• Available in pistol grip and end grip models

1093
• Low wear pin-less hammer design
• Rugged construction with bolt on assist handle
1040EI-TH
• Combined through hole and friction ring anvil
• Three piece housing for ease of repair

1093EI-TH

1” - 1-3/8” Bolt Capacity (25mm - 35mm)

Models Working Torque Max Torque Handle Drive Socket Length Weight Air Inlet / Equivalent
ft lb (Nm) ft lb (Nm) Type Size Retainer in lb Hose ID in (mm) To
1034EI-TH 1,100 (1,491) 1,500 (2,034) End Grip I-T 1” Sq. Through Hole 11.25 19 1/2 NPT 3/4 (19) IR2934B2
1034EO-TH 1,100 (1,491) 1,500 (2,034) End Grip O-T 1” Sq. Through Hole 11.25 19 1/2 NPT 3/4 (19) IR2934A2
1034EI-5S 1,100 (1,491) 1,600 (2,169) End Grip I-T #5 Spline Button 11.25 19 1/2 NPT 3/4 (19) IR2934B1
1034E0-5S 1,100 (1,491) 1,600 (2,169) End Grip O-T #5 Spline Button 11.25 19 1/2 NPT 3/4 (19) IR2934A1
1034EI-THB9 500 (678) 750 (1,000) End Grip I-T 1” Sq. Through Hole 18.75 35.7 1/2 NPT 3/4 (19) IR2934B9
1040PT-TH 1,600 (2,169) 2,000 (2,711) Pistol Grip 1” Sq. Through Hole 9.88 24 1/2 NPT 3/4 (19) IR2940P2
1040PT-5S 1,600 (2,169) 2,000 (2,711) Pistol Grip #5 Spline Button 9.88 24 1/2 NPT 3/4 (19) IR2940P1
1040EI-TH 1,600 (2,169) 2,000 (2,711) End Grip I-T 1” Sq. Through Hole 12.4 24 1/2 NPT 3/4 (19) IR2940B2
1040EO-TH 1,600 (2,169) 2,000 (2,711) End Grip O-T 1” Sq. Through Hole 12.4 24 1/2 NPT 3/4 (19) IR2940A2
1040EI-5S 1,600 (2,169) 2,000 (2,711) End Grip I-T #5 Spline Button 12.4 24 1/2 NPT 3/4 (19) IR2940B1
1040EO-5S 1,600 (2,169) 2,000 (2,711) End Grip O-T #5 Spline Button 12.4 24 1/2 NPT 3/4 (19) IR2940A1
1093EI-TH 1,000 (1,356) 1,800 (2,440) End Grip I-T 1” Sq. Through Hole 14.00 23.25 1/2 NPT 3/4 (19) 793

All models available with extended anvil. Contact ATP Customer Service for more information.
See Ozat Sockets starting on page 40. Socket retaining accessories are provided for all sockets in the Ozat section.

| 5 | 1.800.245.1148 www.onlineatp.com
Super Duty 1” Drive Class Impact Tools
Available with #5 Spline Drive

High Output Impact Tool Series

1041 & 1042 Series
• High output twin hammer mechanisms
• Bronze end plates for increased motor durability
• High output 7 vane motor
• Steel hammer case
1042PT-TH
• Integral muffler for noise reduction
• Three piece housing for ease of repair

1041J & 1042J Series

• High durability single Jumbo hammer mechanisms
• Bronze end plates for increased motor durability
• High output 7 vane motor
• Steel hammer case
• Integral muffler for noise reduction
• Three piece housing for ease of repair
• Great steel erection, heavy maintenance, and rental fleet tools
1041JEI-TH

1” - 1-3/8” Bolt Capacity (25mm - 35mm)

Models Working Torque Max Torque Handle Drive Socket Length Weight Air Inlet / Equivalent
ft lb (Nm) ft lb (Nm) Type Size Retainer in lb Hose ID in (mm) To
1041EI-TH 1,650 (2,240) 2,500 (3,390) End Grip I-T 1” Sq. Through Hole 11.25 19 1/2 NPT 3/4 (19) IR3940B2Ti
1041EO-TH 1,650 (2,240) 2,500 (3,390) End Grip O-T 1” Sq. Through Hole 11.25 19 1/2 NPT 3/4 (19) IR3940A2Ti
1041EI-5S 1,650 (2,240) 2,500 (3,390) End Grip I-T #5 Spline Button 11.25 19 1/2 NPT 3/4 (19) IR3940B1Ti
1041EO-5S 1,650 (2,240) 2,500 (3,390) End Grip O-T #5 Spline Button 11.25 19 1/2 NPT 3/4 (19) IR3940A1Ti
1041JEI-TH 1,650 (2,240) 2,500 (3,390) End Grip I-T 1” Sq. Through Hole 11.25 19 1/2 NPT 3/4 (19) ATP Exclusive
1041JEO-TH 1,650 (2,240) 2,500 (3,390) End Grip O-T 1” Sq. Through Hole 11.25 19 1/2 NPT 3/4 (19) ATP Exclusive
1041JEI-5S 1,650 (2,240) 2,500 (3,390) End Grip I-T #5 Spline Button 11.25 19 1/2 NPT 3/4 (19) ATP Exclusive
1041JEO-5S 1,650 (2,240) 2,500 (3,390) End Grip O-T #5 Spline Button 11.25 19 1/2 NPT 3/4 (19) ATP Exclusive
1042PT-TH 1,900 (2,576) 3,200 (4,338) Pistol Grip 1” Sq. Through Hole 9.88 24.6 1/2 NPT 3/4 (19) IR3942P2Ti
1042PT-5S 1,900 (2,576) 3,200 (4,338) Pistol Grip #5 Spline Button 9.88 24.6 1/2 NPT 3/4 (19) IR3942P1Ti
1042EI-TH 1,900 (2,576) 3,200 (4,338) End Grip I-T 1” Sq. Through Hole 12.4 24.2 1/2 NPT 3/4 (19) IR3942B2Ti
1042EO-TH 1,900 (2,576) 3,200 (4,338) End Grip O-T 1” Sq. Through Hole 12.4 24.2 1/2 NPT 3/4 (19) IR3942A2Ti
1042EI-5S 1,900 (2,576) 3,200 (4,338) End Grip I-T #5 Spline Button 12.4 24.2 1/2 NPT 3/4 (19) IR3942B1Ti
1042EO-5S 1,900 (2,576) 3,200 (4,338) End Grip O-T #5 Spline Button 12.4 24.2 1/2 NPT 3/4 (19) IR3942A1Ti
1042JEI-TH 1,900 (2,576) 3,200 (4,338) End Grip I-T 1” Sq. Through Hole 12.40 24.2 1/2 NPT 3/4 (19) ATP Exclusive
1042JEO-TH 1,900 (2,576) 3,200 (4,338) End Grip O-T 1” Sq. Through Hole 12.40 24.2 1/2 NPT 3/4 (19) ATP Exclusive
1042JEI-5S 1,900 (2,576) 3,200 (4,338) End Grip I-T #5 Spline Button 12.40 24.2 1/2 NPT 3/4 (19) ATP Exclusive
1042JEO-5S 1,900 (2,576) 3,200 (4,338) End Grip O-T #5 Spline Button 12.40 24.2 1/2 NPT 3/4 (19) ATP Exclusive

All models available with extended anvil. Contact ATP Customer Service for more information.
See Ozat Sockets starting on page 40. Socket retaining accessories are provided for all sockets in the Ozat section.

1.800.245.1148 www.onlineatp.com | 6 |
Super Duty 1-1/2” Drive Class Impact Tools
Available with #5 Spline Drive
1550 & 1552 High Output Series
• High output twin hammer mechanisms
• Bronze end plates for increased motor durability
• Model 1552 high output 7 vane motor
• Steel hammer case
• Integral muffler for noise reduction
• Three piece housing for ease of repair

1520 Series
• Two jaw clutch transfers high power
• Steel clutch housing
• Great for hard and soft draw applications
• Integral muffler for noise reduction 1520EO-5S
• Three piece housing for ease of repair

1550EI-TH

1-3/8” - 1-1/2” Bolt Capacity (35mm - 38mm)

Models Working Torque Max Torque Handle Drive Socket Length Weight Air Inlet / Equivalent
ft lb (Nm) ft lb (Nm) Type Size Retainer in lb Hose ID in (mm) To
1550EI-TH 2,500 (3,400) 3,000 (4,067) End Grip I-T 1-1/2” Sq. Through Hole 14.5 33 1/2 NPT 3/4 (19) IR2950B7
1550EO-TH 2,500 (3,400) 3,000 (4,067) End Grip O-T 1-1/2” Sq. Through Hole 14.5 33 1/2 NPT 3/4 (19) IR2950A7
1550EI-5S 2,500 (3,400) 3,000 (4,067) End Grip I-T #5 Spline Button 14.5 33 1/2 NPT 3/4 (19) IR2950B1
1550EO-5S 2,500 (3,400) 3,000 (4,067) End Grip O-T #5 Spline Button 14.5 33 1/2 NPT 3/4 (19) IR2950A1
1552EO-TH 3,300 (4,474) 4,000 (5,424) End Grip O-T 1-1/2” Sq. Through Hole 14.5 33 1/2 NPT 3/4 (19) IR3955A2Ti
1552EI-5S 3,300 (4,474) 4,000 (5,424) End Grip I-T #5 Spline Button 14.5 33 1/2 NPT 3/4 (19) IR3955B1Ti
1552EI-TH 3,300 (4,474) 4,000 (5,424) End Grip I-T 1-1/2” Sq. Through Hole 14.5 33 1/2 NPT 3/4 (19) IR3955B2Ti
1520EI-TH 2,500 (3,400) 3,000 (4,067) End Grip I-T 1-1/2” Sq. Through Hole 14.7 33.7 1/2 NPT 3/4 (19) CP6120-PASED
1520EI-5S 2,500 (3,400) 3,000 (4,067) End Grip I-T #5 Spline Button 14.7 33.7 1/2 NPT 3/4 (19) CP6120-PASEL
1520EO-5S 2,500 (3,400) 3,000 (4,067) End Grip I-T #5 Spline Button 14.7 33.7 1/2 NPT 3/4 (19) CP6120-PASEL

All models available with extended anvil. Contact ATP Customer Service for more information.
See Ozat Sockets starting on page 40. Socket retaining accessories are provided for all sockets in the Ozat section.

| 7 | 1.800.245.1148 www.onlineatp.com
Super Duty “Heavy Hitters” Impact Tools
Available in 1-1/2”, 2-1/2” and 3-1/2” Drive Sizes

1578 & 1580 Series

• Precision ball and cam mechanism
• Built-in lubricator
1580LT-TH • Vertical and horizontal hangers
• Assist handle

2582 & 2588 Series

• Precision ball and cam mechanism
• Built-in lubricator
• Vertical and horizontal hangers
• Assist handle

2588LT-TH

3599 Series
“The Worlds Most Powerful Impact Tool”
• Precision ball and cam mechanism
• Built-in lubricator
• Vertical and horizontal hangers
• Assist handle

3599LT-TH

1-1/2” - 4” Bolt Capacity (38mm - 102mm)

Models Working Torque Max Torque Handle Drive Socket Length Weight Air Inlet / Equivalent
ft lb (Nm) ft lb (Nm) Type Size Retainer in lb Hose ID in (mm) To
1578LT-TH 5,500 (7,456) 10,000 (13,560) T-Handle Lever 1-1/2” Sq. Through Hole 23 86 3/4 NPT 1 (25) IR578A1
1580LT-TH 5,900 (8,000) 13,560 (18,383) T-Handle Lever 1-1/2” Sq. Through Hole 23 88 3/4 NPT 1 (25) IR5980A1
2582LT-TH 10,000 (13,560) 20,000 (27,114) T-Handle Lever 2-1/2” Sq. Through Hole 25.4 120 3/4 NPT 1 (25) IR5982A1
2588LT-TH 25,000 (33,892) 50,000 (67,784) T-Handle Lever 2-1/2” Sq. Through Hole 26.6 215 1 NPT 1 (25) IR588A1
3599LT-TH 42,000 (57,000) 80,000 (108,500) T-Handle Lever 3-1/2” Sq. Through Hole 37.5 599 1-1/4 NPT 1-1/2 (38) IR599A1

See Ozat Sockets starting on page 40. Socket retaining accessories are provided for all sockets in the Ozat section.
See Retaining Rings and Pins for 2-1/2” on page 77, and 3-1/2” drives on page 79

1.800.245.1148 www.onlineatp.com | 8 |
Specialty Impact Tools
UNA DRIV® Impact Tools
The UNA DRIV® impact is a special tool that is used on UNA DRIV® bolts (picture below). These bolts are used heavily
in the manufacture and repair of railroad cars. In the center of the impact anvil is a male hex, which engages the end of
the UNA DRIV bolt female hex, keeping it from turning while the socket on the square drive of the tool turns the nut to
final torque.

Applications
• Rail car Manufacturing/Repair
• Tractor Trailer Manufacturing/Repair

7508/VW834
UNA DRIV® Bolts

7520/VW872

UNA DRIV® Tool Specifications

Models Torque Max. Handle Drive Size Length Weight Air Inlet / Equivalent
Working ft lb Type in lb Hose ID in (mm) To
7508/VW834 100-450 450 Pistol Grip 3/4”Sq. UNA DRIV 12 9.25 3/8 NPT 1/2 (13) IR2908/VW834
7520/VW872 250-800 800 Pistol Grip 1”Sq. UNA DRIV 12 13.25 3/8 NPT 1/2 (13) IR2920/VW872
UNA DRIV® is a registered trademark of BBC Fasteners.

ZAMAC Impact Tools

Spark Proof Castings for Use In Underground Coal Mining Applications

The ZA-12 (zinc) material used in these impact

tool castings is spark proof and unaffected by
the atmospheric conditions found in underground
coal mining, where aluminum castings could
generate a spark. ATP Zamac housing power tools
are approved by the mining underwriters in the UK,
Germany, Poland and Australia where power tools
with aluminum castings are not approved. 1040EI-THZ
7560PT-1Z
Twin Hammer
Two Jaw
ZAMAC Tool Specifications
Models Working Torque Max Torque Handle Drive Socket Length Weight Air Inlet / Bolt Equivalent
ft lb (Nm) ft lb (Nm) Type Size Retainer in lb Hose ID in (mm) Capacity To
7560PT-THZ 560 (760) 1,000 (1,356) Pistol Grip 3/4” Sq. Through Hole 7.6 15 3/4 NPT 1/2 (13) 3/4” (19mm) CP6060 ZASAB
7560PT-1Z 575 (780) 1,025 (1,390) Pistol Grip 1” Sq. Through Hole 7.6 15.1 3/4 NPT 1/2 (13) 3/4” (19mm) CP6060 ZASAK
1040EI-THZ 1,600 (2,169) 2,000 (2,711) End Grip I-T 1” Sq. Through Hole 12.4 26.5 1/2 NPT 3/4 (19) 1-1/4” (32mm) IR 2940B2
1011EI-THZ 1,800 (2,440) 2,800 (3,796) End Grip I-T 1” Sq. Through Hole 12.5 27 1/2 NPT 3/4 (19) 1-3/8” (35mm) CP0611 ZASED
1520EI-THZ 2,500 (3,400) 3,000 (4,067) End Grip I-T 1-1/2” Sq. Through Hole 14.7 38 1/2 NPT 3/4 (19) 1-1/2” (38mm) CP6120 ZASED

See Ozat Sockets starting on page 40. Socket retaining accessories are provided for all sockets in the Ozat section.

| 9 | 1.800.245.1148 www.onlineatp.com
ATSCO and ATP Die Grinders
.5, .7, and .9 HP Tools

ATSCO and ATP collet and threaded arbor

straight grinders are a complete range of
tools in three horsepower offerings, to help
you get the job done in the most demanding
applications and environments.

These tools excel in metal finishing 9913

applications powering mounted burrs and
type 1 grinding wheels.

9913LS

725S-1/4
4420

Straight Grinder Specifications

Models Rated Free Throttle Spindle Wheel Wheel Type Overall Net Air Inlet / Exhaust
HP Speed Lever Output Diameter Maximum Length Weight Hose ID
(kW) RPM Type in (mm) Thickness in (mm) lb (kg) in (mm)
4420 .5 (.37) 23,000 Lever 1/4” Collet *N/R Mounted Burrs 6.8 (173) 1.7 (.76) 1/4 NPT 3/8 (10) Front
725F-1/4 .7 (.52) 25,000 Lever 1/4” Collet *N/R Mounted Burrs 8-1/2 (216) 1.1 (.5) 1/4 NPT 3/8 (10) Front
725S-1/4 .7 (.52) 25,000 Lever 1/4” Collet *N/R Mounted Burrs 8-1/2 (216) 1.1 (.5) 1/4 NPT 3/8 (10) Side
E725S-1/4 .7 (.52) 25,000 Lever 1/4” Collet *N/R Mounted Burrs 16-1/4 (413) 3.3 (1.5) 1/4 NPT 3/8 (10) Side
9913 .9 (.67) 25,000 Lever 1/4” Collet *N/R Mounted Burrs 6-1/4 (158) 2 (.9) 1/4 NPT 3/8 (10) Front
9913-18 .9 (.67) 18,000 Lever 1/4” Collet *N/R Mounted Burrs 6-1/4 (158) 2 (.9) 1/4 NPT 3/8 (10) Front
9913-LS .9 (.67) 25,000 Lever 1/4” Collet *N/R Mounted Burrs 11-1/8 (283) 3 (1.5) 1/4 NPT 3/8 (10) Side
Options: Safety Lock-Off Lever - Add “ST” to the end of model number: Example 9913-ST optional side exhaust model: available as 9913 - for use as a router or side
exhaust tool.
Model 4420 available with an aluminum housing: order model 4420A.
*N/R: Not Required

1.800.245.1148 www.onlineatp.com | 10 |
ATSCO Angle Grinders
.7 and 1.0 HP, 700 and 1000 Series
ATSCO angle grinders are a complete range of tools
to help you get the job done in the most demanding
applications and environments.

These angle grinders excel in metal finishing

applications powering mounted burrs, type 27, type 28
and type 1 grinding wheels.
A712S-D4-1/2

A713F-R4

A712S-1/4

A1006S-R6

Angle Grinder Specifications

Models Rated Free Throttle Spindle Wheel Wheel Type Overall Net Air Inlet / Exhaust
HP Speed Lever Output Diameter Maximum Length Weight Hose ID
(kW) RPM Type in (mm) Thickness in (mm) lb (kg) in (mm)
A712S-1/4 .7 (.52) 12,500 Safety 1/4” Collet *N/R Mounted Burrs 9-5/8 (244) 2.1 (1.0) 1/4 NPT 3/8 (10) Side
A712S-D4 .7 (.52) 12,500 Safety 3/8”-24 4 (101) 27 & 28 (1/8”) 9-5/8 (244) 2.5 (1.1) 1/4 NPT 3/8 (10) Side
A712S-R4 .7 (.52) 12,500 Safety 3/8”-24 4 (101) 1 (1/8”) 9-5/8 (244) 2.5 (1.1) 1/4 NPT 3/8 (10) Side
A712S-D4-1/2 .7 (.52) 12,500 Safety 5/8”-11 4-1/2 (114) 27 & 28 (1/4”) 9-5/8 (244) 2.5 (1.1) 1/4 NPT 3/8 (10) Side
A713F-1/4 .7 (.52) 13,500 Safety 1/4” Collet *N/R Mounted Burrs 10 (254) 2.5 (1.1) 1/4 NPT 3/8 (10) Front
A713F-D4 .7 (.52) 13,500 Safety 3/8”-24 4 (101) 27 & 28 (1/8”) 10 (254) 2.9 (1.3) 1/4 NPT 3/8 (10) Front
A713F-R4 .7 (.52) 13,500 Safety 3/8”-24 4 (101) 1 (1/8”) 10 (254) 2.9 (1.3) 1/4 NPT 3/8 (10) Front
A1007S-D5 1 (.75) 7,500 Safety 5/8”-11 5 (127) 27 & 28 (1/4”) 13 (330) 6.5 (2.95) 1/4 NPT 3/8 (10) Side
A1006S-D6 1 (.75) 6,000 Safety 5/8”-11 6 (152) 27 & 28 (1/4”) 13 (330) 6.5 (2.95) 1/4 NPT 3/8 (10) Side
A1006S-R6 1 (.75) 6,000 Safety 5/8”-11 6 (152) 1 (.045”) 13 (330) 6.5 (2.95) 1/4 NPT 3/8 (10) Side
A1006S-D7 1 (.75) 6,000 Safety 5/8”-11 7 (179) 27 & 28 (1/4”) 13 (330) 6.5 (2.95) 1/4 NPT 3/8 (10) Side
A1008S-D7 1 (.75) 8,000 Safety 5/8”-11 7 (179) 27 & 28 (1/4”) 13 (330) 6.5 (2.95) 1/4 NPT 3/8 (10) Side

Standard equipment on all models: standard guard size per wheel diameter (guard not required with collet tools)
A1000 series tools have governed motors.
*N/R: Not Required

| 11 | 1.800.245.1148 www.onlineatp.com
ATSCO Horizontal Grinders
1.2 HP 1200 Series

ATSCO 1200 series horizontal grinders have set the

standard for high performance rugged production
grinders used in fabrication shops, fabricated metal
plants, petrochemical maintenance, shipyards,
foundries, and many other markets.
1215S-C
The extensive product range offers speeds and spindle
configurations to improve operator productivity.

1215S-R4
1215S-1/4

Horizontal Grinder Specifications

Models Rated Free Throttle Spindle Wheel Wheel Type Overall Net Air Inlet Exhaust
HP Speed Lever Output Guard Dia. Maximum Length Weight Hose ID
(kW) RPM Type in (mm) Thickness in (mm) lb (kg) in (mm)
1215S-1/4 1.2 (.9) 15,000 Lever 1/4” Collet *N/R Mounted Burrs 17-1/2 (444) 5.5 (2.5) 3/8 NPT 3/8 (10) Side
1215S-3/8 1.2 (.9) 15,000 Lever 3/8” Collet *N/R Mounted Burrs 17-1/2 (444) 5.5 (2.5) 3/8 NPT 3/8 (10) Side
1215S-C 1.2 (.9) 15,000 Lever 3/8”-24 Cone Cone Wheels 16-1/8 (410) 5.3 (2.4) 3/8 NPT 3/8 (10) Side
1215S-R3 1.2 (.9) 15,000 Lever 3/8”-24 3” (76) 1 (1/2”) 16-3/4 (425) 5.9 (2.7) 3/8 NPT 3/8 (10) Side
1215S-R4 1.2 (.9) 15,000 Lever 3/8”-24 4” (101) 1 (1/4”) 16-3/4 (425) 6 (2.7) 3/8 NPT 3/8 (10) Side
1218S-1/4 1.2 (.9) 18,000 Lever 1/4” Collet *N/R Mounted Burrs 17-1/2 (444) 5.5 (2.5) 3/8 NPT 3/8 (10)) Side
1218S-3/8 1.2 (.9) 18,000 Lever 3/8” Collet *N/R Mounted Burrs 17-1/2 (444) 5.5 (2.5) 3/8 NPT 3/8 (10) Side
1218S-C 1.2 (.9) 18,000 Lever 3/8”-24 Cone Cone Wheels 16-1/8 (410) 5.3 (2.4) 3/8 NPT 3/8 (10) Side
1218S-R3 1.2 (.9) 18,000 Lever 3/8”-24 3” (76) 1 (1/2”) 16-3/4 (425) 5.9 (2.7) 3/8 NPT 3/8 (10) Side
Standard equipment on all models: standard guard size per wheel diameter (guard not required with collet tools)
All 1200 series tools have governed motors.
*N/R: Not Required

Other Model Options Available: Build your desired model

Series
Free Speed Side Spindle
RPM Exhaust Output
12 09 = 9,000 S 1/4 = 1/4” Collet
12 12 = 12,000 S 3/8 = 3/8” Collet
12 15 = 15,000 S C = Cone Wheel
12 18 = 18,000 S R3 = 3” Type 1 Guard
R4 = 4” Type 1 Guard
Model Example: 1209S-3/8 = 12 series, 9000 rpm, side exhaust, 3/8” collet

1.800.245.1148 www.onlineatp.com | 12 |
ATSCO Heavy Duty Extended
Horizontal Grinders
1.2 HP E1200HD Series
ATSCO E1200HD series heavy duty extended horizontal grinders have set the
standard for high performance rugged production grinders used in finishing castings
in foundries and other unique applications. The heavy duty double row spindle
bearing and dust cover provide robust durability in the most demanding
metal finishing applications.

The extensive product range offers heavy duty extensions of

7”, 13”, 26”, and 36” in speeds and spindle configurations
to allow the operator to work in confined longer
E1215S-13HD-1/4
reach applications.

Heavy Duty Double Row Spindle

Bearing and Cover on all HD Models

E1212S-26HD-1/4

Extended Grinder Specifications

Models Rated Free Throttle Spindle Overall Extension Net Extension Air Inlet / Exhaust
HP Speed Type Output Length Length Weight Diameter Hose ID
(kW) RPM in (mm) in (mm) lb (kg) in in (mm)
E1218S-7HD-1/4 1.2 (.9) 18,000 Lever 1/4” Collet 20-1/2 (520) 7 (178) 5.6 (2.5) 1-3/8 3/8 NPT 3/8 (10) Side
E1218S-7HD-C 1.2 (.9) 18,000 Lever 3/8”-24 19 (483) 7 (178) 5.4 (2.4) 1-3/8 3/8 NPT 3/8 (10) Side
E1215S-13HD-1/4 1.2 (.9) 15,000 Lever 1/4” Collet 26-1/2 (673) 13 (330) 7.2 (3.3) 1-3/8 3/8 NPT 3/8 (10) Side
E1215S-13HD-3/8 1.2 (.9) 15,000 Lever 3/8” Collet 26-1/2 (673) 13 (330) 7.2 (3.3) 1-3/8 3/8 NPT 3/8 (10) Side
E1212S-26HD-1/4 1.2 (.9) 12,000 Lever 1/4” Collet 40 (1,016) 26 (660) 9.4 (4.3) 1-3/8 3/8 NPT 3/8 (10) Side
E1212S-26HD-C 1.2 (.9) 12,000 Lever 3/8”-24 38-1/2 (978) 26 (660) 9.2 (4.2) 1-3/8 3/8 NPT 3/8 (10) Side
E1212S-36HD-3/8 1.2 (.9) 12,000 Lever 3/8” Collet 50 (1,270) 36 (914) 11.3 (5.1) 1-3/8 3/8 NPT 3/8 (10) Side
E1212S-36HD-C 1.2 (.9) 12,000 Lever 3/8”-24 48-1/2 (1,232) 36 (914) 11.1 (5.0) 1-3/8 3/8 NPT 3/8 (10) Side
All E1200 series tools have governed motors.

Other Model Options Available: Build your desired model

Series Free Speed Side Extension Spindle
RPM Exhaust Length Output
E12 09 = 9,000 S 7HD = 7” 1/4 = 1/4” Collet
E12 12 = 12,000 S 13HD = 13” 3/8 = 3/8” Collet
E12 15 = 15,000 S 26HD = 26” C = Cone Wheel
E12 18 = 18,000 S 36HD = 36”
Model Example: E1209S-13HD-C = E12 series, 9,000 rpm, side exhaust,
13” heavy bearing extended housing, cone wheel
Non standard lengths available upon request

| 13 | 1.800.245.1148 www.onlineatp.com
ATSCO Extended
Horizontal Grinders
1.2 HP E1200 Series
ATSCO E1200 series extended horizontal grinders
have set the standard for high performance rugged
production grinders used in finishing castings in
foundries and other unique finishing applications.
E1212S-26-1/4
The extensive product range offers extensions of 7”,
13”, 26”, and 36” in speeds and spindle configurations
to allow the operator to work in confined longer reach
applications.

E1218S-7-C

Extended Grinder Specifications

Models Rated Free Throttle Spindle Overall Extension Net Extension Air Inlet / Exhaust
HP Speed Type Output Length Length Weight Diameter Hose ID
(kW) RPM in (mm) in (mm) lb (kg) in in (mm)
E1218S-7-1/4 1.2 (.9) 18,000 Lever 1/4” Collet 20-1/2 (520) 7 (178) 5.6 (2.5) 1 3/8 NPT 3/8 (10) Side
E1218S-7-C 1.2 (.9) 18,000 Lever 3/8”-24 19 (483) 7 (178) 5.4 (2.4) 1 3/8 NPT 3/8 (10) Side
E1215S-13-1/4 1.2 (.9) 15,000 Lever 1/4” Collet 26-1/2 (673) 13 (330) 7.2 (3.3) 1 3/8 NPT 3/8 (10) Side
E1215S-13-3/8 1.2 (.9) 15,000 Lever 3/8” Collet 26-1/2 (673) 13 (330) 7.2 (3.3) 1 3/8 NPT 3/8 (10) Side
E1212S-26-1/4 1.2 (.9) 12,000 Lever 1/4” Collet 40 (1,016) 26 (660) 9.4 (4.3) 1 3/8 NPT 3/8 (10) Side
E1212S-26-C 1.2 (.9) 12,000 Lever 3/8”-24 38-1/2 (978) 26 (660) 9.2 (4.2) 1 3/8 NPT 3/8 (10) Side
E1212S-36-3/8 1.2 (.9) 12,000 Lever 3/8” Collet 50 (1,270) 36 (914) 11.3 (5.1) 1 3/8 NPT 3/8 (10) Side
E1212S-36-C 1.2 (.9) 12,000 Lever 3/8”-24 48-1/2 (1,232) 36 (914) 11.1 (5.0) 1 3/8 NPT 3/8 (10) Side
All E1200 series tools have governed motors.

Other Model Options Available: Build your desired model

Series Free Speed Side Extension Spindle
RPM Exhaust Length Output
E12 09 = 9,000 S 7 = 7” 1/4 = 1/4” Collet
E12 12 = 12,000 S 13 = 13” 3/8 = 3/8” Collet
E12 15 = 15,000 S 26 = 26” C = Cone Wheel
E12 18 = 18,000 S 36 = 36”
Model Example: E1209S-13-C = E12 series, 9,000 rpm, side exhaust,
13” standard bearing extended housing, cone wheel
Non standard lengths available upon request

1.800.245.1148 www.onlineatp.com | 14 |
ATP and ATSCO Vertical Grinders
3HP 356 and 3000 Series

ATP and ATSCO 3HP vertical grinders continue

to stand the test of time as high performance
durable tools used in the most demanding heavy
metal removal and finishing applications.

Features
• Safety lock-off lever throttle
• Stainless steel corrosion resistant
governors
• Rugged sand cast housings are highly 356VSL-60-6
durable in extreme environments
• Ease of service design
356VSL-60-7
• 356VSL models use “Techalloy” housing
to provide the ultimate in reduced weight and
strength
• V3000 models use a floating rotor design to
extend motor life from axle loads
• V3000 models have sealed motor governors
for extended life

V3060-S6

V3060-D9

Vertical Grinder Specifications

Models Rated Free Wheel Wheel Weight Height to Side to Spindle Air Inlet /
HP Speed Type Diameter Less Guard Flange Bottom Center Thread Hose ID
(kW) rpm in (mm) lb (Kg) in (mm) in (mm) in in (mm)
356VSL-45-7 3 (2.2) 4,500 27 & 28 7 (178) 7-3/8 (3.3) 5-1/2 (145) 1-11/16 (43) 5/8-11 1/2 NPT 1/2 (13)
356VSL-60-6 3 (2.2) 6,000 6” Cup 6 (152) 7-3/8 (3.3) 5-1/2 (145) 1-11/16 (43) 5/8-11 1/2 NPT 1/2 (13)
356VSL-60-7 3 (2.2) 6,000 27 & 28 7 (178) 7-3/8 (3.3) 5-1/2 (145) 1-11/16 (43) 5/8-11 1/2 NPT 1/2 (13)
356VSL-60-9 3 (2.2) 6,000 27 & 28 9 (229) 7-3/8 (3.3) 5-1/2 (145) 1-11/16 (43) 5/8-11 1/2 NPT 1/2 (13)
356VSL-80-7 3 (2.2) 8,000 27 & 28 7 (178) 7-3/8 (3.3) 5-1/2 (145) 1-11/16 (43) 5/8-11 1/2 NPT 1/2 (13)
V3060-S6 3 (2.2) 6,000 6” Cup 6 (152) 8 (3.6) 5-15/16 (150.8) 1.8 (45.7) 5/8-11 1/2 NPT 1/2 (13)
V3060-D7 3 (2.2) 6,000 27 & 28 7 (179) 8 (3.6) 5-15/16 (150.8) 1.8 (45.7) 5/8-11 1/2 NPT 1/2 (13)
V3072-D7 3 (2.2) 7,200 27 & 28 7 (179) 8 (3.6) 5-15/16 (150.8) 1.8 (45.7) 5/8-11 1/2 NPT 1/2 (13)
V3060-D9 3 (2.2) 6,000 27 & 28 9 (229) 8 (3.6) 5-15/16 (150.8) 1.8 (45.7) 5/8-11 1/2 NPT 1/2 (13)
Standard equipment on all models: standard guard size per wheel diameter
Standard equipment on 356VSL models: 2” wheel flange and spindle nut, spindle wrench 1100-200 (2”) and 1102-015 (5/32”) allen type wrench
356VSL models equipment at extra price: spindle / wheel retention screw and retention screw collar 650-60, optional wheel guards
Standard equipment on all V3000 models: wheel collar wrench 269-601

| 15 | 1.800.245.1148 www.onlineatp.com
ATP and ATSCO Vertical Grinders
4 HP 466 and 4000 Series
ATP and ATSCO 4HP vertical grinders continue
to stand the test of time as high performance
durable tools used in the most demanding
heavy metal removal and
finishing applications.

Features
• Safety lock-off lever throttle
• Stainless steel corrosion resistant
governors
• Rugged sand cast housings are highly
durable in extreme environments
• Ease of service design 466VSL-60-6
• 466VSL models use “Techalloy” housing
to provide the ultimate in reduced weight and 466VSL-60-9
strength
• 4060 models use a floating rotor design to
extend motor life from axle loads
• 4060 series have sealed motor governors for
extended life

V4060-D9

V4060-S6
Vertical Grinder Specifications
Models Rated Free Wheel Wheel Weight Height to Side to Spindle Air Inlet /
hp Speed Type Diameter Less Guard Flange Bottom Center Thread Hose ID
(kW) rpm in (mm) lb (Kg) in (mm) in (mm) in in (mm)
466VSL-45-7 4 (3) 4,500 27 & 28 7 (178) 9.5 (4.3) 6-7/16 (174) 1-7/8 (48) 5/8-11 1/2 NPT 1/2 (13)
466VSL-60-6 4 (3) 6,000 6” Cup 6 (152) 9.5 (4.3) 6-7/16 (174) 1-7/8 (48) 5/8-11 1/2 NPT 1/2 (13)
466VSL-60-7 4 (3) 6,000 27 & 28 7 (178) 9.5 (4.3) 6-7/16 (174) 1-7/8 (48) 5/8-11 1/2 NPT 1/2 (13)
466VSL-60-9 4 (3) 6,000 27 & 28 9 (229) 9.5 (4.3) 6-7/16 (174) 1-7/8 (48) 5/8-11 1/2 NPT 1/2 (13)
466VSL-80-7 4 (3) 8,000 27 & 28 7 (178) 9.5 (4.3) 6-7/16 (174) 1-7/8 (48) 5/8-11 1/2 NPT 1/2 (13)
V4060-S6 4 (3) 6,000 6” Cup 6 (152) 12.5 (5.67) 6-7/16 (163.5) 2.5 (63.5) 5/8-11 1/2 NPT 1/2 (13)
V4060-D7 4 (3) 6,000 27 & 28 7 (179) 12.5 (5.67) 6-7/16 (163.5) 2.5 (63.5) 5/8-11 1/2 NPT 1/2 (13)
V4060-D9 4 (3) 6,000 27 & 28 9 (229) 12.5 (5.67) 6-7/16 (163.5) 2.5 (63.5) 5/8-11 1/2 NPT 1/2 (13)
Standard equipment on all models: standard guard size per wheel diameter
Standard equipment on 466VSL models: 2” wheel flange and spindle nut, spindle wrench 1100-200 (2”) and 1102-015 (5/32”) allen type wrench
466VSL models equipment at extra price: spindle /wheel retention screw and retention screw collar 650-60, optional wheel guards
Standard equipment on V4060 models: wheel collar wrench 269-601

1.800.245.1148 www.onlineatp.com | 16 |
ATP and ATSCO Horizontal Grinders
3 and 4HP ATP 356 and 465 Series
2, 3, and 4HP ATSCO 2000, 3000 and 4000 Series
ATP and ATSCO horizontal series of grinders
continue to stand the test of time as high
performance durable tools used in the most
demanding heavy metal removal and finishing
applications. 356HSL-60-6

Features
• Safety lock-off lever throttle
465HG-60-6
• Stainless steel corrosion resistant
governors
• Rugged sand cast housings are highly 3087S-C
durable in extreme environments
• Ease of service design
• Models 356 and 465 use “Techalloy”
housings to provide the ultimate in
reduced weight and strength.
4060S-R8
• Models 2212, 3087, and 4060 floating rotor
design extends motor life from axle loads 2212S-C
• Models 2212, 3087, and 4060 have sealed
motor governors for extended life
Horizontal Grinder Specifications
Models
Handle Rated Free Wheel Wheel Type Weight Less Length to Side to Spindle Air Inlet /
Type hp Speed Guard and Size Guard Flange Center Thread Hose ID
(kW) RPM Size lb (kg) in (mm) in (mm) in in (mm)
2209S-C Lever 2.2 (1.6) 9,000 N/R 5/8-11 Cone Wheel 8 (3.6) 19-3/4 (484) 1-1/8 (28.6) 5/8-11 1/2 NPT 1/2 (13)
2212S-C Lever 2.2 (1.6) 12,000 N/R 5/8-11 Cone Wheel 8 (3.6) 19-3/4 (484) 1-1/8 (28.6) 5/8-11 1/2 NPT 1/2 (13)
2215S-C Lever 2.2 (1.6) 15,000 N/R 5/8-11 Cone Wheel 8 (3.6) 19-3/4 (484) 1-1/8 (28.6) 5/8-11 1/2 NPT 1/2 (13)
356HSL-45-8 Lever 3 (2.2) 4,500 8” 1 - 8” x 1” 10.5 (4.8) 20-1/8 (524) 1-1/4 (32) 5/8-11 1/2 NPT 1/2 (13)
356HSL-60-6 Lever 3 (2.2) 6,000 6” 1 - 6” x 1” 10.5 (4.8) 20-1/8 (524) 1-1/4 (32) 5/8-11 1/2 NPT 1/2 (13)
356HG-45-8 Grip 3 (2.2) 4,500 8” 1 - 8” x 1” 10.5 (4.8) 20-1/8 (524) 1-1/4 (32) 5/8-11 1/2 NPT 1/2 (13)
356HG-60-6 Grip 3 (2.2) 6,000 6” 1 - 6” x 1” 10.5 (4.8) 20-1/8 (524) 1-1/4 (32) 5/8-11 1/2 NPT 1/2 (13)
3087S-C Lever 3 (2.2) 8,750 N/R 5/8-11 Cone Wheel 9 (4.1) 19 (483) 1-1/2 (38.1) 5/8-11 1/2 NPT 1/2 (13)
3060S-R6 Lever 3 (2.2) 6,000 6” 1 - 6” x 1” 9.25 (4.2) 19 (483) 1-1/2 (38.1) 5/8-11 1/2 NPT 1/2 (13)
3060S-R8 Lever 3 (2.2) 6,000 8” 1 - 8” x 1” 9.25 (4.2) 19 (483) 1-1/2 (38.1) 5/8-11 1/2 NPT 1/2 (13)
465HSL-45-8 Lever 4 (3.3) 4,500 8” 1 - 8” x 1” 10.5 (4.8) 20-7/8 (530) 1-1/4 (32) 5/8-11 1/2 NPT 1/2 (13)
465HSL-60-6 Lever 4 (3.3) 6,000 6” 1 - 6” x 1” 12.5 (5.7) 20-7/8 (530) 1-1/4 (32) 5/8-11 1/2 NPT 1/2 (13)
465HG-45-8 Grip 4 (3.3) 4,500 8” 1 - 8” x 1” 12.5 (5.7) 20-7/8 (530) 1-1/4 (32) 5/8-11 1/2 NPT 1/2 (13)
465HG-60-6 Grip 4 (3.3) 6,000 6” 1 - 6” x 1” 12.5 ( 5.7) 20-7/8 (530) 1-1/4 (32) 5/8-11 1/2 NPT 1/2 (13)
4045S-R8 Lever 4.5 (3.4) 4,500 8” 1 - 8” x 1” 12.5 (5.7) 20-1/2 (521) 1-5/16 (49.2) 5/8-11 1/2 NPT 1/2 (13)
4060S-C Lever 4.5 (3.4) 6,000 N/R 5/8-11 Cone Wheel 12.25 (5.6) 20-1/2 (521) 1-5/16 (49.2) 5/8-11 1/2 NPT 1/2 (13)
4060S-R6 Lever 4.5 (3.4) 6,000 6” 1 - 6” x 1” 12.5 (5.7) 20-1/2 (521) 1-5/16 (49.2) 5/8-11 1/2 NPT 1/2 (13)
4060S-R8 Lever 4.5 (3.4) 6,000 8” 1 - 8” x 1” 12.5 (5.7) 20-1/2 (521) 1-5/16 (49.2) 5/8-11 1/2 NPT 1/2 (13)
Standard equipment on all models: standard guard size per wheel diameter (guard not required with cone wheels).
Standard equipment on 356 and 465 models: 2” wheel flange and spindle nut, spindle wrench 1100-200 (2”) and 1102-015 (5/32”) allen type wrench.
356 and 465 models equipment at extra price: spindle /wheel retention screw and retention screw collar 650-60, optional wheel guards.

| 17 | 1.800.245.1148 www.onlineatp.com
ATSCO Rammers
Bench and Floor Models

ATSCO rammers are ideally suited for foundry and

refractory applications.

Features
T241F-3-1/4R
T2BA:
• Adjustable packing nut to reduce air blow-by
for maximum power.
• Aluminum backhead to reduce weight.

T241F:
• Self cleaning rocker valve for increased
performance.
• Adjustable packing nut to reduce air blow
by for maximum power.
• Muffler to reduce noise to the operator.

T2BA

Rammer Specifications
Models Bore x Stroke BPM Length Weight Butt Diameter Air Inlet /
in (mm) x in (mm) in (mm) lb (Kg) in (mm) Hose ID in (mm)
T2BA 1 (25) x 2-1/2 (63) 1,725 15-3/4 (400) 7.7 (3.5) 2-1/2 (64) 1/4 NPT 3/8 (10)
T241F-3-1/4R 1-5/16 (33) x 4 (102) 1,590 52-3/4 (1,370) 28.9 (13.1) 3-1/4 (76) 1/2 NPT 1/2 (13)

Standard Butts: Rubber

T2BA Optional Butts: T241F Optional Butts:
1-3/4” Rubber 3” Rubber
2-1/2” Steel 3” Malleable
5” Rubber 3” Aluminum
Other butt sizes available upon request 5” Rubber
Other butt sizes available upon request

1.800.245.1148 www.onlineatp.com | 18 |
ATP Scaler Tools
ATP needle and chisel scalers are offered
in a compact design for close quarter work
removing weld flux, paint, scale, weld spatter,
rust and other residue from a variety of irregular
surfaces in fabrication shops, shipyards
foundries, refineries, construction sites and
MRO applications.

Features A-1ALT
Weld Flux Scaler
• Rugged design and precision manufacturing
specifications make these scalers last
longer with low maintenance costs.
• Model A-1ALT scaler quickly converts to a
needle scaler for better tool utilization.

A-1ALTNS
Needle Scaler

A-1ACO
Coke Oven Scaler

A-A1AS/L
Solid Back
Head Scaler

Scaler Specifications
Models Scaler Model Throttle Bore x Stroke BPM Weight Length Air Inlet /
Type Type in (mm) x in (mm) lb (kg) in (mm) Hose ID in (mm)
A-1ALT Weld Flux Scaler Lever 1 (25.4) x 1-1/8 (28.8) 4,600 4.5 (2.17) 9-1/2 (243) 1/4 NPT 3/8 (10)
A-1ALTNS Needle Scaler Lever 1 (25.4) x 1-1/8 (28.8) 4,600 6 (2.7) 17-1/2 (448) 3/8 NPT 3/8 (10)
A-A1AS/L Solid Back Head Scaler *Solid Type 1 (25.4) x 1-1/8 (28.8) 4,600 4 (1.81) 8-1/2 (217.9) 1/2 NPT 3/8 (10)
A-1ACO Coke Oven Scaler Coke Oven 1 (25.4) x 1-1/8 (28.8) 4,600 5 (2.27) 11-5/8 (298) 1/2 NPT 3/8 (10)
A-1APT Push Throttle Scaler Push Type 1 (25.4) x 1-1/8 (28.8) 4,600 4.5 (2.17) 10 (256.4) 1/4 NPT 3/8 (10)
*A-A1AS/L has no throttle built into the tool.

| 19 | 1.800.245.1148 www.onlineatp.com
ATSCO Chipping Hammers
2” and 3” Stroke Models

ATSCO chipping hammers are excellent tools

for casting finishing, weld clean up, concrete
work, and other industrial applications.

Features

• Forged steel handle for extreme durability.

• Unique valve box design provides more

power in lighter and more compact tool.

TC20C-R

TC30C-H

Chipping Hammer Specifications

Models Bore x Stroke BPM Length Weight Chisel CFM Air Inlet /
in (mm) x in (mm) in (mm) lb (Kg) Bushing Hose ID in (mm)
TC20C-H 1-1/8 (29) x 2 (51) 2,300 13.5 (343) 12.9 (5.9) .580 Hex 28 1/2 NPT 12 (13)
TC20C-R 1-1/8 (29) x 2 (51) 2,300 13.5 (343) 12.9 (5.9) .680 Round 28 1/2 NPT 12 (13)
TC30C-H 1-1/8 (29) x 3 (76) 2,000 14.5 (368) 13.25 (6) .580 Hex 29 1/2 NPT 12 (13)
TC30C-R 1-1/8 (29) x 3 (76) 2,000 14.5 (368) 13.25 (6) .680 Round 29 1/2 NPT 12 (13)
Standard Equipment: oval collar retainer
Options: round collar retainer, quick change retainer, inlet swivel

1.800.245.1148 www.onlineatp.com | 20 |
ATP Chipping Hammers
ATP’s Heavy Duty Chipping
Hammers
Favored by contractors and industrial users alike,
ATP Chippers set new standards for American made
pneumatic tools. Their crisp, smooth valve operation
produces extra hard hitting power, while the heat treated
alloy steel cylinder and piston provide long life.
Additionally, ATP Chippers are ergonomically advanced
Standard Equipment:
in design, the closed grip handle locates the operator’s
• Oval Collar Retainer P/N 250012-525
hand and arm in-line with the chisel for maximum
• Spring P/N 250012-529
effectiveness and operator comfort. This makes the ATP
Chippers much easier to handle and less fatiguing when
Optional Equipment:
used over long periods of time.
• Nozzle Bushing Removal Tool
P/N 3CH-931
If you need a RUGGED, RELIABLE PERFORMER on
• Exhaust Deflector Extension Tool
your job site, you can’t do better than the
P/N 3CH-932
ATP ERGONOMIC CHIPPING HAMMER.
• 1/2” Hose Barb Inlet

Features
• Heavy duty alloy aluminum or steel handles
• Aluminum handle eliminates 3.7 lbs of total tool weight
• Available in the popular 1”-2”-3”-4” stroke versions
• Available with either hex or round chisel bushing

Chipping Hammer Specifications

Models Weight lb Length Less BPM Bore x Stroke Chisel CFM Air Inlet /
Aluminum (Steel) Retainer in in Bushing Hose ID in (mm)
1HB - (17) 12.75 2,600 1-1/8 x 1 .580 Hex 26 cfm 1/2 NPT 1/2 (13)
1RB - (17) 12.75 2,600 1-1/8 x 1 .680 Round 26 cfm 1/2 NPT 1/2 (13)
2HB - (17.2) 14 2,300 1-1/8 x 3 .580 Hex 26 cfm 1/2 NPT 1/2 (13)
2RB - (17.2) 14 2,300 1-1/8 x 3 .680 Round 26 cfm 1/2 NPT 1/2 (13)
3HB - (18.5) 15.25 2,100 1-1/8 x 3.75 .580 Hex 30 cfm 1/2 NPT 1/2 (13)
3RB - (18.5) 15.25 2,100 1-1/8 x 3.75 .680 Round 30 cfm 1/2 NPT 1/2 (13)
4HB - (19.5) 16.5 1,700 1-1/8 x 4.25 .580 Hex 33 cfm 1/2 NPT 1/2 (13)
4RB - (19.5) 16.5 1,700 1-1/8 x 4.25 .680 Round 33 cfm 1/2 NPT 1/2 (13)
1AHB 13.3 - 12.75 2,600 1-1/8 x 1 .580 Hex 26 cfm 1/2 NPT 1/2 (13)
1ARB 13.3 - 12.75 2,600 1-1/8 x 1 .680 Round 26 cfm 1/2 NPT 1/2 (13)
2AH 13.7 - 14 2,300 1-1/8 x 3 .580 Hex 26 cfm 1/2 NPT 1/2 (13)
2ARB 13.7 - 14 2,300 1-1/8 x 3 .680 Round 26 cfm 1/2 NPT 1/2 (13)
3AHB 14.8 - 15.25 2,100 1-1/8 x 3.75 .580 Hex 30 cfm 1/2 NPT 1/2 (13)
3ARB 14.8 - 15.25 2,100 1-1/8 x 3.75 .680 Round 30 cfm 1/2 NPT 1/2 (13)
4AHB 15.8 - 16.5 1,700 1-1/8 x 4.25 .580 Hex 33 cfm 1/2 NPT 1/2 (13)
4ARB 15.8 - 16.5 1,700 1-1/8 x 4.25 .680 Round 33 cfm 1/2 NPT 1/2 (13)

| 21 | 1.800.245.1148 www.onlineatp.com
ATP Chipping Hammers

ATP 4 Bolt Chipping

Hammer with Thread on
Retainer
Favored by contractors and industrial users
alike, ATP Chippers set new standards for
American made pneumatic tools. Their crisp,
smooth valve operation produces extra hard
hitting power, while the heat treated alloy
steel cylinder and piston provide long life.
Additionally, ATP Chippers are ergonomically
advanced in design, the closed grip handle
locates the operator’s hand and arm in-line
with the chisel for maximum effectiveness and
3AHBTR
operator comfort. This makes ATP Chippers
much easier to handle and less fatiguing
when used over long periods of time.

If you need a RUGGED, RELIABLE

PERFORMER on your job site, you can’t do
better than the ATP ERGONOMIC
CHIPPING HAMMER.
Optional Thread
Features on Retainer
• Heavy duty alloy aluminum or steel Available on 3” Stroke only
handles
• Aluminum handle eliminates 3.7 lbs of total The 3” stroke models of the ATP Heavy Duty Chipping
tool weight Hammers are available with rubber buffered thread on
• Available with either hex or round chisel retainer for round collar chisels. These ATP Chipping
bushing Hammers are ideally suited for chipping of steel castings,
concrete roughing and chipping heavy duty weld seams.
Standard Equipment:
Thread on retainer, buffer and spring on
thread on barrel model only.

Chipping Hammer Specifications

Models Weight lb Length Less BPM Bore x Stroke Chisel CFM Air Inlet
Aluminum (Steel) Retainer in in Bushing Hose ID in (mm)
3AHBTR 14.8 (—) 15 2,100 1-1/8 x 3.75 Hex 30 1/2 NPT 1/2 (13)
3HBTR — (18.5) 15 2,100 1-1/8 x 3.75 Hex 30 1/2 NPT 1/2 (13)
3ARBTR 14.8 (—) 15 2,100 1-1/8 x 3.75 Round 30 1/2 NPT 1/2 (13)
3RBTR — (18.5) 15 2,100 1-1/8 x 3.75 Round 30 1/2 NPT 1/2 (13)

1.800.245.1148 www.onlineatp.com | 22 |
Thor Breakers

Legendary Construction
Air Tools Since 1886
Thor Breakers
Thor Breakers, available in the 30, 60 and
90 lb Class, are “Tools as Tough as their
name”. The 30 lb class Thor 17 Breakers
are light weight rugged tools designed for
light to medium construction and plant
maintenance work such as demolition of
floors, pavement, masonry walls, black top
and frozen dirt. The 17 is also an excellent 17
choice for bridge deck demolition work. (30lb Class)

The 60 lb class Thor 234 and the 90 lb

class Thor 125 breakers are designed to
deliver the performance and endurance
necessary for a variety of heavy duty
construction and plant maintenance
applications, such as breaking rock,
concrete, reinforced concrete, frozen
earth and pavement. 234-1.125
(60lb Class)
Features of all Thor Breakers:

• Alloy steel forgings

• Precision American machined parts
for long life
• Rugged 4 bolt design for extra duty
service.
• Continuous lubrication provided by
internal oilers for long service life 125-1.125
• Air inlet swivel for maneuverability. (90lb Class)

Paving Breaker Specifications

Models Chuck Size Bore x Stroke BPM Length Weight CFM Air Inlet
in in (mm) x in (mm) in (mm) lb (kg)
17 7/8 x 3-1/4 1-3/4 (44) x 3-3/8 (86) 1,550 22-1/2 (572) 32 (14.5) 46 3/8 NPT, male
17-1 1 x 4-1/4 1-3/4 (44) x 3-3/8 (86) 1,550 22-1/2 (572) 32 (14.5) 46 3/8 NPT, male
234-1.125 1-1/8 x 6 2-1/4 (57) x 4-3/32 (104) 1,400 25-5/8 (651) 67 (30) 60 3/8 NPT, male
234-1.25 1-1/4 x 6 2-1/4 (57) x 4-3/32 (104) 1,400 25-5/8 (651) 67 (30) 60 3/8 NPT, male
125-1.125 1-1/8 x 6 2-5/8 (66.67) x 6-1/16 (154) 1,250 28-3/4 (730) 92 (42) 80 3/8 NPT, male
125-1.25 1-1/4 x 6 2-5/8 (66.67) x 6-1/16 (154) 1,250 28-3/4 (730) 92 (42) 80 3/8 NPT, male

| 23 | 1.800.245.1148 www.onlineatp.com
Thor Clay Diggers

Legendary Construction
Air Tools Since 1886

Thor 18 “Digger”

Thor 18 CD is a dropped forged clay

digger recommended for digging clay in
packed soil from around footings, forms
and other construction areas. It’s 29 lb
weight makes it a hard hitting tool, making
quick work of the task at hand.

Features

• Alloy steel forgings

• Heat treated alloy steel components
• Slim design for work in tight areas
• Latch retainer for positive retention and
quick change of accessories
• Swivel air inlet for operator comfort
• Closed grip handle with lever throttle

18CD-.875

Clay Digger Specifications

Models Chuck Size Bore BPM Length Weight CFM Air Inlet
in in (mm) in (mm) lb (kg)
18CD-.875 7/8 Hex x 3-1/4 1-3/4 (44.8) 1,500 22-3/4 (583) 29 (13) 38 3/8 NPT, male
18CD-1 1 Hex x 4-1/4 1-3/4 (44.8) 1,500 22-3/4 (583) 29 (13) 38 3/8 NPT, male

1.800.245.1148 www.onlineatp.com | 24 |
Thor Rivet Busters
8” and 11” Stroke Models

Thor RB-08 and RB-11 demolition tools are ideal for medium to heavy concrete
demolition on bridge decks, parking garage columns, bridge pillars, and rivet
and bolt cutting applications.

Features

• Closed grip with inside trigger provides operator comfort and trigger protection
• Hardened steel piston and cylinder for excellent wear and life
RB-11
• Uses industry standard 11x Jumbo steel
• Tease throttle for exceptional start and control
• Internal piston safety retainer

Rivet Buster Specifications

Models Bore x Stroke BPM Length Weight Chisel CFM Air Inlet /
in (mm) x in (mm) in (mm) lb (kg) Shank Hose ID in (mm)
RB-08 1-3/16 (30) x 8 (203) 980 22-1/2 (572) 30 (13.61) Jumbo 44 1/2 NPT 1/2 (mm)
RB-11 1-3/16 (30) x 11 (279) 850 25-1/2 (648) 33 (15) Jumbo 50 1/2 NPT 1/2 (mm)

Thor Back Fill Tamper 6T

Thor’s 6T Backfill Tamper is a 40 lb Class Tamper that has also “Stood the Test
of Time”. It’s powerful 800 Blows Per Minute (BPM) is easily guided by one person
due to its smooth operation and superb balance. The 6T is designed to effectively
compact soil around foundations and other structures and for compacting backfill
in trenches and other construction holes requiring compaction.

Features

• High power to weight operation

• Powerful blows quickly compacts clay, gravel and other backfill materials
• Heat treated cylinder and piston for long service life
• Hex head bolt clamp for easy tamper butt changes
• Lever throttle operation

Backfill Tamper Specifications

Model Taper Bore x Stroke BPM Length Weight CFM Air Inlet
in (mm) x in (mm) in (mm) lb (kg)
6T 804 Taper 1-1/2 (38) x 5-1/2 (140) 800 48-1/4 (1,226) 40 (18) 38 1/2 NPT

| 25 | 1.800.245.1148 www.onlineatp.com
ATP Air Centrifugal Sump Pump

ATP 551P Sump Pump

The 551P is a light weight, portable, air
operated, fully submersible sump pump with
the power to pump up to 216 gallons of
water per minute.

This non-clogging, self-cleaning pump for

clean or dirty water, sewage, oil and sludge
is capable of handling all your pumping
requirements. The rugged cast iron housing
is built to take life’s hard knocks. The built in
oiler will handle up to 16 hours of continuous
air motor lubrication.

Convenient carry handles make this versatile

pump easy to handle at the job site. The
adjustable governor prevents “run-away”
when sump is pumped dry or if the impeller
clears water while it is in operation.

Features
• Submersible
• lightweight
• Portable
• Cast iron housing construction
551P • Steel impeller
• Built in oiler

Maximum Performance:
• Max Flow - 216 GPM
• Max Head - 92 Feet

Standard Equipment:
• Built in oiler
• Extended exhaust pipe with check valve
to prevent water from entering the motor
through the exhaust

Optional Equipment:
• Air valve, lever type for remote
operation. (at additional cost)

Pump Specifications
Model Height Weight Opening Pump Discharge Pump Housing CFM Air Inlet
in (mm) lb (Kg) Will Enter Opening in Material
551P 20 (513) 41 (18.6) 8-5/8” x 10-1/2” 2-1/2 NPT Cast Iron 75 1/2 NPT
*interchanges with Thor 51T

1.800.245.1148 www.onlineatp.com | 26 |
 Air Air
ATP Hoists
Chain Hoists
500 to 4000 lb. Capacity

Features
ATP Air Hoist Applications:
Applications:
The 91200
The ATP 91200
extra extra
heavyheavy-duty
duty hoist hoist
seriesisisdesigned
designedtotoliftliftraw
Chain Hoists - 500worm
• Self-locking to 4000
gear lb. Capacity
design eliminates or processed
raw materials
or processed in steel
materials manufacturing
in steel manufacturing plants, heavy
plants,
the need for a break (including break repairs assemblies
heavy in automobile,
assemblies trucktruck
in automobile, and and
tractor factories,
tractor factories,air-
Features:
and brake adjustments). When air flow to the craft, aerospace
aircraft, aerospaceindustries,
industries,heavy
heavymachinery
machinerymanufacture,
manufacture,
• Self-locking
motor stops,worm thegear
worm design
gear stops and holds petrochemical plants
petrochemical plants and
andfood
foodprocessing
processingoperations.
operations.
eliminates the need
the load securely for brakes. The
worm gear stops and holds loads
•securely when air
Heat-treated flow
alloy to motor
steel chain stops-
provides
never requires any adjustments
strength and flexibility
• Heat-treated alloy steel chain provides
•strength
Powerfulandairflexibility
motor provides positive
• Powerful ATP air
high-torque motorcharacteristics
starting provides
positive high-torque starting
•characteristics
All rotating parts supported on anti-friction
• All bearings
rotating parts supported
for smooth on anti-
operations
friction bearings for smooth operations
• •Housing
Housing of of
sectioned
sectioned aluminum
aluminum “Techalloy” 91200
ATP (500-2000
91200 lb.) lb.)
(500-2000
“Techalloy” castings provide
castings provide extra strength extra and durability
strength and durability
• •Automatic,
Automatic, adjustable
adjustable limit stops
limit - - prevent
stops
prevent over-travel, even at
over-travel, even at fastest speedsfastest
speeds
• •Withstands
Withstands constant
constant stopping,
stopping, starting
starting and
711 mm

andstalling
stalling - without damage or
28 in.

- without damage or overheating

overheating
• •Operator
Operator speed
speed control
control- for precise
- for precise load
load spotting
spotting
• Remote pendant control - available in
•all Remote
sizes pendent control - available in all sizes
• Standard safety cable attachment
ATP 91200
91200 (4000
(4000 lb.) lb.)
•point
Topprovides secure
hook swivels installation
360°

• Standard safety cable attachment point

provides secure installation
ATP AIR HOISTS ATP 91200
Air Hoist Specifications
MODEL# Control Rated Lifting Hook Speed Standard Lift Pendent Net Weight
Models Control Rated Lifting Hook Speed Standard Lift Standard Control Net Weight Air Inlet /
Description Capacity at Rated Capacity Length Length lb. (kg)
Description Capacity at Rated Capacity Length Length lb (kg) Hose ID
lb. (kg) ft./min (m/min) ft mm ft
lb (kg) ft./min (m/min) ft (m) ft (m) in (mm)
ATP 91200-DC Pull Chain 500 lb. (227) 44 (12.8) 15 (4.6) 10 60 (27.3)
91200-DC Pull Chain 500 (227) 44 (12.8) 15 (4.6) 10 (3.1) 60 (27.3) 1/2 NPT 3/4 (19)
ATP 91200-DP Pendant Control 500 lb. (227) 44 (12.8) 15 (4.6) 10 63 (28.6)
91200-DP Pendent 500 (227) 44 (12.8) 15 (4.6) 10 (3.1) 63 (28.6) 1/2 NPT 3/4 (19)
ATP 91200-MC Pull Chain 1000 lb. (455) 20 (6.1) 15 (4.6) 10 60 (27.3)
91200-MC Pull Chain 1,000 (455) 20 (6.1) 15 (4.6) 10 (3.1) 60 (27.3) 1/2 NPT 3/4 (19)
ATP 91200-MP Pendant Control 1000 lb. (455) 20 (6.1) 15 (4.6) 10 63 (28.6)
91200-MP Pendent 1,000 (455) 20 (6.1) 15 (4.6) 10 (3.1) 63 (28.6) 1/2 NPT 3/4 (19)
ATP 91200-2MC Pull Chain 2000 lb. (909) 12 (3.7) 15 (4.6) 10 60 (27.3)
91200-2MC Pull Chain 2,000 (909) 12 (3.7) 15 (4.6) 10 (3.1) 60 (27.3) 1/2 NPT 3/4 (19)
ATP 91200-2MP Pendant Control 2000 lb. (909) 12 (3.7) 15 (4.6) 10 63 (28.6)
91200-2MP Pendent 2,000 (909) 12 (3.7) 15 (4.6) 10 (3.1) 63 (28.6) 1/2 NPT 3/4 (19)
ATP 91200-4MC Pull Chain 4000 lb. (1818) 5 (1.5) 15 (4.6) 10 109 (49.5)
91200-4MC Pull Chain 4,000 (1,818) 5 (1.5) 15 (4.6) 10 (3.1) 109 (49.5) 1/2 NPT 3/4 (19)
ATP 91200-4MP Pendant Control 4000 lb. (1818) 5 (1.5) 15 (4.6) 10 112 (50.9)
91200-4MP Pendent 4,000 (1,818) 5 (1.5) 15 (4.6) 10 (3.1) 112 (50.9) 1/2 NPT 3/4 (19)
StandardEquipment:
Standard Equipment:swivel
Swiveltoptoplatch
latchhooks,
hooks,built-in
built-inlubricators
lubricatorsandandairairstrainer,
strainer,exhaust
exhaustmuffler
muffler, optional chain bucket CO88945
Parts are
Optional available at
Equipment from ATPCost:
Extra for thechain
CP 1100 Chainbucket
container Hoist. C088945, additional chain lift and pendent control beyond standard lengths.

| 27 | 1.800.245.1148 www.onlineatp.com
1.800.245.1148 www.onlineatp.com | 22 |
ATP Large Air Drills
ATP 2122 Series Drills
The 2122 series drills are designed for RUGGED HEAVY DUTY
drilling, reaming, tapping and tube rolling applications in heavy
fabrication, petrochemical, general industrial, and construction
industries.

Features
• Ball bearing support for long life and smooth operation
• Roll throttle for excellent speed control
• Governor-controlled motor conserves air at light loads, holds
speed at peak horse power under heavy loading
• Internal oil reservoir reduces “downtime”
• External grease fitting for easy lubrication
• Self closing roll throttle with independent reverse

Standard Equipment:
• Breast plate, assist handle, 1/2” shank, wood bore chuck
2122-725WB
Optional Equipment:
• #2 and #3 morse tapers, ½” and ¾” drill chucks *Shown with optional
1/2” Drill Chuck
ATP 3500 Drills and Morse Taper Spindle.
3500 drills are used for extra heavy duty drilling, reaming,
tapping and tube rolling applications in petrochemical, heavy
fabrication, general industrial, shipbuilding and construction
industries.

Features
• Reversible self-closing roll throttle for one-hand throttle
control and reversing.
• Governor controlled motor conserves air at light loads,
holds speed at heavier loads while increasing power
• Heavy-duty ball bearings for long life
• 5.9 horse power motor and rugged gearing provides
maximum power output
• Integral #4 and #5 morse taper female sockets for fast, easy
change overs and positive drill bit retention
• Feed screw for drilling or reaming down force 3500RAFYM
2122 Drill Specifications
Models Free Weight Height Over Side To Center CFM Spindle and Air Inlet /
Speed lb (Kg) Spindle Distance Spindle Hose ID
RPM in (mm) in (mm) Chuck in (mm)
2122-725WB 725 14.4 (6.46) 17.25 (438) 1-7/16 (36) 50 Threaded, 1/2” Shank 1/2 NPT 3/4 (19)
Wood Bit Chuck
2122-360-1/2 360 14.4 (6.46) 17.25 (438) 1-7/16 (36) 50 1/2” Chuck 1/2 NPT 3/4 (19)
Also available in 280 rpm, 350 rpm and 375 rpm models

3500 Drill Specifications

Models Free Weight Height Over Side To Center CFM Spindle and Air In;et /
Speed lb (Kg) Spindle Distance Spindle Hose ID
RPM in (mm) in (mm) Chuck in (mm)
3500RAFUL 100 69 (31.4) 23.25 (591) 2.75 (69.9) 165 #4MT 1 NPT 1 (25)
3500RAFYM 60 69 (31.4) 23.25 (591) 2.75 (69.9) 165 #5MT 1 NPT 1 (25)

1.800.245.1148 www.onlineatp.com | 28 |
ATP Air Motors
Productivity in Motion
ATP Air Motors
Use ATP air motors whenever you need a rugged and reliable power source for the most demanding
requirements. We offer a wide range of air motors to fit your needs.

• ATP Air Motors are 100% U.S.A. Manufactured

• ATP can also custom design motors for your unique applications

Contact ATP’s customer service team for a motor quotation.

Features:
• Optional 2 movement safety trigger
• Variable speed and torque control
• High output durable vane motor
• Rugged planetary gearing
• Mounts in any position
• Keyed output shaft
3400 Series Specifications
Speed at Air Consumption
Max Power Max. Power Free Speed Starting Torque Stall Torque At Max. Power Weight
Models (hp) (kW) (RPM) (RPM) (ft lb) (Nm) (ft lb) (Nm) (CFM) (m3/m) (lb) (kg)
CML 3460 1.14 .085 180 260 40 54 56 76 45 1.27 7.3 3.3
CML 3488 1.14 .085 90 130 85 115 110 149 45 1.27 7.3 3.3

Features:
• Variable speed and torque control
• High output durable vane motor
• Rugged planetary gearing
• Keyed output drive shaft
• Six hole face mounting
• Mounts in any position
3800 Series Specifications
Speed at Air Consumption
Max Power Max. Power Free Speed Starting Torque Stall Torque At Max. Power Weight
Models (hp) (kW) (RPM) (RPM) (ft lb) (Nm) (ft lb) (Nm) (CFM) (m3/m) (lb) (kg)
Non-Reversible (Direction of rotation is counterclockwise when facing the shaft end of motor)
ATP 3800P 1.45 1.08 285 600 42 57.0 56.5 76.6 48 1.36 8.5 3.86
ATP 3800Q 1.45 1.08 180 375 62 84.0 83.5 113.0 48 1.36 8.5 3.86
ATP 3800R 1.45 1.08 150 320 72 98.0 96.0 130.0 48 1.36 8.5 3.86
ATP 3800S 1.45 1.08 120 255 88 119.0 118.0 160.0 48 1.36 8.5 3.86
ATP 3800U 1.45 1.08 105 220 105 142.0 140.0 189.0 48 1.36 8.5 3.86
Reversible
ATP 3840P 1.35 1.01 215 440 40 54.2 53.5 72.6 44 1.25 8.75 3.97
ATP 3840Q 1.35 1.01 130 280 60 81.4 80.0 108.0 44 1.25 8.75 3.97
ATP 3840R 1.35 1.01 122 238 69 93.0 92.0 125.0 44 1.25 8.75 3.97
ATP 3840S 1.35 1.01 100 190 86 116.0 115.0 156.0 44 1.25 8.75 3.97
ATP 3840U 1.35 1.01 83 162 100 135.0 134.0 181.0 44 1.25 8.75 3.97

| 29 | 1.800.245.1148 www.onlineatp.com
ATP Air Motors
Productivity in Motion

Features:
• Variable speed and torque control
• High output durable vane motor
• Rugged planetary gearing
• Keyed output drive shaft
• Six hole face mounting
• Mounts in any position
4800 Series Specifications
Speed at Air Consumption
Max Power Max. Power Free Speed Starting Torque Stall Torque At Max. Power Weight
Models (hp) (kW) (RPM) (RPM) (ft lb) (Nm) (ft lb) (Nm) (CFM) (m3/m) (lb) (kg)
Non-Reversible (Direction of rotation is counterclockwise when facing the shaft end of motor)
ATP 4800K 3.7 2.76 821 1,538 35.3 47.8 47 63.7 95 2.69 15.25 6.92
ATP 4800M 3.7 2.76 560 1,050 51 69.2 69 93.6 95 2.69 15.25 6.92
ATP 4800N 3.7 2.76 387 726 75 102 100 136 95 2.69 15.25 6.92
ATP 4800P 3.7 2.76 260 510 98 133 131 178 95 2.69 19.75 9.0
ATP 4800Q 3.5 2.61 194 375 129 175 173 235 95 2.69 19.75 9.0
ATP 4800S 3.5 2.61 146 275 178 241 238 323 95 2.69 19.75 9.0
ATP 4800U 3.5 2.61 97 185 265 359 354 480 95 2.69 19.75 9.0
Reversible
ATP 4840K 3.2 2.39 711 1,429 32 43.4 42.7 57.9 95 2.69 15.25 6.92
ATP 4840M 3.2 2.39 485 975 47.3 64 63 85.4 95 2.69 15.25 6.92
ATP 4840N 3.2 2.39 336 675 67.7 91.7 90.2 122 95 2.69 15.25 6.92
ATP 4840P 3 2.24 228 475 93 126 125 170 95 2.69 20.125 9.13
ATP 4840Q 3 2.24 167 350 123 167 165 224 95 2.69 20.125 9.13
ATP 4840S 3 2.24 125 255 161 218 215 292 95 2.69 20.125 9.13
ATP 4840U 3 2.24 83 170 225 305 300 407 95 2.69 20.125 9.13

Features:
• With or without reverse, CW or CCW rotation
• Custom designed for multiple applications
• Keyed or tapered output drive shaft
• Variable speed and torque control
• High output durable vane motor
• Fixture mount in any position
• Rugged planetary gearing
7600 Series Specifications
Speed at Air Consumption
Max Power Max. Power Free Speed Starting Torque Stall Torque At Max. Power Weight
Models (hp) (kW) (RPM) (RPM) (ft lb) (Nm) (ft lb) (Nm) (CFM) (m3/m) (lb) (kg)
7667-400 .45 .34 210 400 11.3 15.3 22 29.8 25 .71 2.5 1.13
7667-600 .45 .34 425 600 6.4 8.68 11 14.9 25 .71 2.5 1.13
7667-1000 .45 .34 600 1,000 4.8 6.5 7.5 10.2 25 .71 2.5 1.13

1.800.245.1148 www.onlineatp.com | 30 |
ATP Air Motors
Productivity in Motion

Features:
• Variable speed and torque control
• High output durable vane motor
• Keyed output shaft
• Flange mounts

318 Series Specifications

Speed at Torque @ Air Consumption
Max Power Max. Power Free Speed Max power Stall Torque At Max. Power Weight
Models (hp) (kW) (RPM) (RPM) (ft lb) (Nm) (ft lb) (Nm) (CFM) (m3/m) (lb) (kg)
318-RSM3000 2.90 2.16 3,450 * 4.5 6.10 9.0 12.20 135 3.80 20 9.07
318-RSM300 2.90 2.16 370 * 42.0 57.0 75.0 101.69 45 1.27 35 15.88
318-RSM125 2.90 2.16 155 * 99.0 134.23 175.0 237.27 135 3.80 60 27.22
318-RSM40 2.90 2.16 59 * 262.50 356.0 525.0 711.80 135 3.80 60 27.22

* Ungoverned stationary motors must be use in applications where the motor will always run under load.

Features:
• Variable speed and torque control
• High output durable vane motor
• Rugged spur gearing
• Keyed output shaft
• Foot mounting

3501 Series Specifications

Speed at Torque @ Air Consumption
Max Power Max. Power Free Speed Max Power Stall Torque At Max. Power Weight
Models (hp) (kW) (RPM) (RPM) (ft lb) (Nm) (ft lb) (Nm) (CFM) (m3/m) (lb) (kg)
3501-RSM3600 7.0 5.22 3,500 7,100 10.0 13.56 17.0 23.05 190 5.38 26 11.79
3501-RSM1800 7.0 5.22 1,590 3,180 23.0 31.18 38.0 51.52 190 5.38 65 29.48
3501-RSM1000 7.0 5.22 900 1,820 41.0 55.59 68.0 92.20 190 5.38 65 29.48
3501-RSM400 7.0 5.22 350 710 105.0 142.36 175.0 237.27 190 5.38 65 29.48
3501-RSM310 7.0 5.22 280 570 130.0 176.26 220.0 298.28 190 5.38 65 29.48
3501-RSM200 7.0 5.22 185 370 200.0 271.16 330.0 447.42 190 5.38 65 29.48
3501-RSM150 7.0 5.22 150 275 245.09 332.30 450.0 610.12 190 5.38 65 29.48
3501-RSM100 7.0 5.22 99 180 347.0 470.47 620.0 840.61 210 5.95 77 34.93
3501-RSM60 7.0 5.22 52 95 710.0 962.63 1,200.0 1,626.98 210 5.95 77 34.93

| 31 | 1.800.245.1148 www.onlineatp.com
Jet Air Fan “Moving More Air by Design”
ATP-JA20 High Performance Air Mover
ATP’s JET AIR produces superior air flow. Thanks
to the engineering of our trailing edge design, the
blades pull more air through the fan in the forward
direction like a Jet Prop. The result, we move more
air at lower fan speeds using less energy than the
competition does!

Features:
• Used for general ventilation where compressed
air power source is available.
• Designed for fixtured applications, easily mounting
to a 20” API flange.
• Dynamically balanced 4 blade design for smoother
operation.
• High visibility orange - powder coated stainless
steel fan shroud for safety.
• Manufactured to aircraft tolerances & specifications.
• Moves more air by design, at air pressures between
40-110 psi (2.75 - 7.6 bar).
• Reduces air turbulence by design, smoother air flow at all RPM’s using only 2 rotating parts.
• Hy-Tech bearing grease used in all high speed Jet Air Bearings.
• Can be used as a blower or exhauster by turning it around.

Ventilation Applications and Industries:

• Removal of hazardous fumes from tanks, process vessels, welding, sandblasting and other operations in
confined areas.
• Used in Refineries, Chemical Plants, Shipyards, Power Generation, Paper Mills and Steel Fabrication Plants.

Specifications:
• Fan assembly shaft rotates on permanently sealed ball bearings.
• Air consumption at 60 PSI, 115 CFM @ 2,700 RPM.
• Fits 20” (508 mm) API tank opening bolt circle.
• Delivery - up to 11,200 CFM (19,029 m3/hr).
• Max 120 PSI, Working pressure 40-110 PSI.
• Weight 103 lbs (Shipping weight 113 lbs).
• Mounting slots 1 1/8” diameter.
• Air inlet 3/4” NPT.

1.800.245.1148 www.onlineatp.com | 32 |
 ATP Venturi Air Movers “Air Horns”

10VAM
ATP10VAM

Features:
• Used for portable ventilation where compressed air
is available as a power source.
• Rugged “Tech-Alloy” aluminum casting.
• No moving parts to replace.
• Periodic steam cleaning for easy maintenance.
• Can pull air from confined areas or blow fresh air
into area.
• Grounding wire and clamp - standard equipment.
• Will operate on compressed air or steam.

Ventilation Applications and Industries:

• Removal of hazardous fumes from tanks, process
vessels, welding, sandblasting and other operations
in confined areas.
• Cooling personnel, machinery or production
ATP3VAM product with a blast of air.
• Used in Refineries, Chemical Plants, Shipyards,
Power Generation, Paper Mills and Steel
Fabrication Plants.

ATP8VAM
8VAM
ATP6VAM
3VAM
6VAM

ATP3VAMS
3VAMS

ModelsModel Length
MODEL# Base
Length Base Top Top Air NPTWeightWeight CFM Flow
CFM FlowCFM Used
CFM Used
in Diameter in DiameterDiameter
Diameter in Inlet in Size lb @ 80 @
PSI80 PSI@ 80@ PSI80 PSI
3VAMS
ATP
ATP3VAMS
9940-316.75 16.75”7.31 7.31” 6.0 6.0” 1/2 NPT 1/2” 5.5 5.5 LBS 1,180 1180 65 65
3VAMATP 3VAM 30.5 30.5”7.31 7.31” 7.0 7.0” 1/2 NPT 1/2” 8.5 8.5 LBS 1,450 1450 65 65
6VAMATP 6VAM 44.25 44.25”11.25 11.25” 12.5 12.5” 1 NPT 1” 22.0 22.0 LBS 3,350 3350 125 125
8VAMATP 8VAM 46.0 46.0”14.37 14.37” 14.25 14.25”1 NPT 1” 36.0 36.0 LBS 4,930 4930 195 195
ATP 10VAM 48.0
10VAM 48.0”17.0 17.0” 15.75 15.75”1 NPT 1” 42.0 42.0 LBS 7,300 7300 275 275

StrictStrict precautions may be required when using any air horn, To reduce the risk of injury, all operators and maintenance personnel must read and follow
precautions may be required when using any air horn. To reduce the risk of injury, all operators and maintenance personnel must
the safety instructions before operating the air horns. Failure to read and follow the safety instructions could result in serious injury or death.
read and follow the safety instructions before operating the air horns. Failure to read and follow the safety instructions could result in
Product Safety Note: Always attach a grounding cable. Grounding clamp and wire must be used to prevent static electricity build up which could
serious injury or
cause a spark.death. Product Safety Note: Always attach a grounding cable. Grounding clamp and wire must be used to prevent
static electricity build up which could cause a spark.

|1.800.245.1148
33 | 1.800.245.1148 www.onlineatp.com
www.onlineatp.com | 26 |
ATP Air Tool Lubricants
Oil and Grease

ATP Ice Free “BLUE MAGIC”

Air Tool Lubricant
For Pneumatic Tools

This oil is especially compounded for lubricating

Air Impact Tools, Hammers, Drills, Grinders,
Pumps, Breakers, Air Motors and other
Pneumatic Tools. Moisture in compressed air
will rapidly wash away most lubricating oils
used in air tools. “BLUE MAGIC” oil, has Impact Mechanism (Clutch)
additives that absorb such moisture into Lubricant “Pure Gold”
the lubricant, forming a stable emulsion which
A superior synthetic moly-based extreme
clings to the inside of the tool. It not only
pressure lubricant for use in all types of
lubricates and rustproofs, but it prevents “ice”
grease lubricated impact mechanisms,
from forming in the tool’s exhaust, and is good
anvil bushings and high speed air motor
to -40 degrees F reducing the need for most
bearings.
cold weather air line additives. During idle time,
there is no separation of moisture and oil. This Pure Gold Lubricant
constantly maintained protective film prevents
rust and corrosion in the inside of air tools. Models Container Size
CA-131898 14.5 oz Cartridge
C-131689 7-1/2 lb Pail
IMPORTANT:
When using “BLUE MAGIC” Ice Free Oil in Air
Line Lubricators, adjust the feed rate to
approximately 1/3 of that used with regular oil.
”BLUE MAGIC” oil does not wash out of air
tools as rapidly as regular oils do.
Blue Magic Oil
Models Container Size Case Quantity
P-137646 Pint 24
P-137145 Quart 12
P-089507 Gallon 4

1.800.245.1148 www.onlineatp.com | 34 |
ATP Air Line Accessories

ATP Automatic In-line Oilers

The ATP (football type) automatic in-line oilers are
designed to supply oil for tool lubrication anywhere
stationary lubricators are not feasible to use.
Automatic in-line oilers should be installed as close
to the air tool as possible. The ATP automatic in-line
oilers have an adjustable needle valve flow control
to permit easy regulation of oil flow. Oil flow while
using ATP’s ice free “Blue Magic” air tool lubricant ATP 0L
should be set at approximately one drop per minute.
The rugged cast housing provides long service life
under the most severe service conditions.

ATP 1L

ATP 2L
ATP 3L

In-line Oiler Specifications

Models Thread Max. Working Recommended Oil
NPT/Hose Pressures Wt./Capacity
Barb Pipe in (PSI) (FL. OZ.)
ATP 0L 1/2 NPT 500 ATP Blue Magic/5 Wt. 1.4 Fl. Oz.
ATP 1L 3/4 NPT 260 ATP Blue Magic/5 Wt. 4.0 Fl. Oz.
ATP 2L 3/4 NPT 300 ATP Blue Magic/5 Wt. 11.0 Fl. Oz.
ATP 3L 1 NPT 250 ATP Blue Magic/5 Wt. 16.0 Fl. Oz.
Repair kit for in-line oiler ATP-LRK

| 35 | 1.800.245.1148 www.onlineatp.com
ATP Air Line Accessories
Sahara Moisture Separator
With Automatic Drain
Features
ATP Whip Hoses
• Removes 100% of visible moisture from air lines
• Will pass 180 CFM through 3/4” NPT fittings at 90 PSI ATP whip hoses are made of high strength and
• Can be mounted on a portable frame durable hydraulic hose, with 3600 inlet swivels,
• No need for changing filter units in-line oilers, and Chicago quick connect fittings.
• Suitable for up to 100 PSI Whip hoses are 6’ in total length.
• No moving parts

Whip Hose Specifications

Models Tool Inlet Size in Hose Size in
WH-4 1/4 Inlet 1/2
WH-6 3/8 Inlet 1/2
Model Inlet in Outlet in Rated Pressure WH-5 1/2 Inlet 1/2
S7F 3/4 NPT 3/4 NPT 100 PSI or 7 BAR
Weight: 11 lbs Dimensions: 6” Dia. x 9.5”

Sahara Separator Installation

Air Flow
Compressed air enters the Compressed air leaves separator
separator with moisture in free of moisture supplied to tools
the air. and other air powered equipment.

S7F

Extracted moisture collected in the sump is

dissipated through a drain valve.

1.800.245.1148 www.onlineatp.com | 36 |
ATPAirAirLine
LineAccessories
Accessories
Standard Universal
Hose Couplings
AStandard Universal
TP Universal Hose Couplings are a
Hose
rugged Couplings
rust proof one-piece design with
the convenience of a quarter turn
ATP Universal Hose Couplings are a
connect/disconnect
rugged rust proof one-piecefeature.design
The design
with Male Thread Coupling
increases holding power
the convenience of a quarter turn and seal with
increase in air pressure.
connect/disconnect The
feature. Thegaskets
design will Size NPT Male NPT
BronzeMale
Part
not blow orholding
increases fall out. The and
power samesealsize
with Bronze Models
Pipe Thread Pipe Number
Thread in
coupling
increase inend
air is used on
pressure. Theallgaskets
sizes making
will C-015123
3/8” 3/8
C-015123
not blow or fall out. The same
for easy interchange of different sizesize coupling
C-015122
1/2” 1/2
C-015122
end isassemblies.
hose used on all sizes making forgaskets
The coupling easy
interchange of different size hose assemblies. C-015121
3/4” 3/4
C-015121
are made of high grade materials that
The coupling gasket are made of high- C-0151201” C-015120
1
retain their effective resiliency indefinitely.
grade materials that retain their effective
Gaskets are easily installed using
resiliency indefinitely. Gaskets are easily
only yourusing
installed fingers.only No
yourspecial
fingers. tools are
No special
required for installation!
tools are required for installation!

WARNING:
WARNING: ALWAYS
ALWAYS use a coupling
use a coupling Female Thread Coupling
lock
lockpin
pin(part
(partnumber
numberC-142110)
C142110) to to
prevent injury from accidental
prevent injury from accidental uncoupling Size NPT Female NPT Female
Bronze Part
of universalof
uncoupling hose couplings.
universal hoseWhip Bronze Models
Pipe Thread PipeNumber
Thread in
hoses can cause serious
couplings. Whip hoses can injury!
cause C-015128
3/8” 3/8
C-015128
serious injury! C-015127
1/2” 1/2
C-015127
3/4”
C-015126 C-015126
3/4
SpecialLarge
Special Large Size
Size
Universal Couplings: C-0151251” C-015125
1
Universal Couplings:
These have the same advantages of the
These have the same advantages of the
Standard UniversalCouplings
Standard Universal Couplings except
except
there is no interconnect ability with
there is no interconnect ability with standard
standard
sizes. sizes.
Hose End Coupling
Bronze Models Size Description
Bronze Part Number Size HosePart
Bronze
C-015145 1-1/2 NPT
1-1/2" NPT Male Pipe Thread Male PipeC-015145
Thread Bronze
HoseModels
I.D. I.D. in
Number
1-1/2" NPT
C-015175 1-1/2Female Pipe Thread
NPT Female PipeC-015175
Thread C-015134
3/8” 3/8
C-015134
1-1/2”1-1/2
C-015176 Diameter Hose I.D. Diameter Hose
C-015176
I.D. C-015132
1/2” 1/2
C-015132
3/4”
C-015131 C-015131
3/4
Rubber gasket for large Universal C-0151301” C-015130
1
Rubber gasket
Couplings, for large Universal
C015071
Couplings, C-015071
*One gasket supplied with each coupling
*One gasket supplied with each coupling

Coupling Accessories

Dead End Cap C-035019

3 Way Coupling C-035021
Rubber Gasket C-035138

|1.800.245.1148
37 | 1.800.245.1148 www.onlineatp.com
www.onlineatp.com | 30 |
 Air Tool Replacement Parts

The Performance Upgrade: Fix It To Last.

In addition
ATP’s to spare air
replacement parts
toolforparts
ATP,are
ATSCO,
knownand
for Thor brands, we
unsurpassed also manufacture
quality. many
We have a complete
replacement parts for Ingersoll Rand, Chicago Pneumatic, Cleco, Top Cat, Sullair,
line of superior quality parts for Chicago Pneumatic, Ingersoll Rand, Cleco, Top Cat, andSullair
other
leading brands.ATP, Thor and every other major brand.
and of course
Our products have been manufactured in the U.S.A. since 1923 and engineered at or
Our products have been manufactured in the U.S.A. since 1923, by world-class, certified
above the most current OEM specifications and standards producing;
machinists, and engineered at or above the most current OEM specifications and standards.
• Less down time
• Fewer changeTime
Less Down outs
• Reduced maintenance
Fewer Change Outs costs
• Reduce Maintenance Costs
Repairing your tools with high quality ATP/ATSCO replacement parts
gives you the confidence your tools will get the job done.
Our parts fit right out of the box, each and every time. Repairing your tools with high
With
qualityover
ATP20,000 OEM part
replacement numbers
parts in stock,
gives you the next time
the confidence
you
yourneed
toolsquality
will getreplacement parts, demand ATP/ATSCO.
the job done.

With over 10,000 OEM part numbers in

stock, the next time you need
quality replacement parts,
demand ATP.

1.800.245.1148 www.onlineatp.com | 38 |
ATP Air Tool Tune Up Kits

ATP Tune Up Kits

ATP Tune Up Kits contain those items which are essential to a professional tool Tune-Up,
and assures maximum productivity and utilization of your tools. Selected vanes, bearings,
gaskets, and seals are packaged for ease of use and storage.

PART # FITS MODELS

C-101077 CP20
C-101083 CP3440
C-101088 CP606
C-101089 CP610
C-101090 CP612
C-101091 CP365
C-101614 CP614
C-101987 CP6120
C-115811 CP611
C-118984 CP606
C-119108 CP612
C-132252 CP365
C-137568 CP6060
CA-131501 CP797
1710B/1710P-TK3 IR1710
1712B/1712P-TK3 IR1712
1720B-TK2 IR1720B
1720P-TK2 IR1720P
261-TK2 IR261
2906P-TK1 IR2906P
2908-TK1 IR2908
2908P-TK2 IR2908P
2910-TK4 IR2910
2920B-TK2 IR2920B
2920P-TK2 IR2920P
2921P-TK2 IR2921P
2925-TK2 IR2925
2934-TK3 IR2934
2940-TK3 IR2940
2945-TK2 IR2945
2950-TK2 IR2950
3940-TK1 IR3940
3941-TK1 IR3941
3942-TK1 IR3942
3955-TK1 IR3955
599-TK1 IR599
99V/99H-TK3 IR99V & IR99H Grinders
270-1700 ATSCO V3000 Grinders
270-1900 ATSCO V4000 Grinders
270-2500 ATSCO A712S & 725S Die and Angle Grinders
270-6500 ATSCO 1200 Series Horizontal Grinders

| 39 | 1.800.245.1148 www.onlineatp.com
 Super Strength Impact Sockets.
Striking Wrenches and Accessories

WORLD’S MOST EXTENSIVE PRODUCT LINE

ELECTRO CHEMICALLY MACHINED (ECM)

LESS STRESS DESIGN

OZAT is a Division of Hy-Tech Machine, Inc.

1.800.245.1148 www.onlineatp.com | 40 |
 Why OZAT?
Electro Chemically Machined (ECM):
Electro Chemical Machining (ECM) is a process in which electrical and
chemical energy sources are used for efficient and cost-effective metal
removal. The process features:

• Fast machining of complex geometries and hard metals

• Smooth surface finishing
• Stress-free performance
• Absence of thermal strain
• High accuracy
• Automatic deburring

Sockets Are Fully Machined From Bar Stock

ECM Process Illustration

The cathode tool is shaped to provide the form desired in the work-piece. A
low voltage is delivered by the power supply unit and an electrolyte is
pumped under high pressure between the tool and the work-piece. A
mechanically driven ram feeds the tool at a consistent rate into the work-
piece to machine the desired shape or cavity.

|1.800.245.1148
41 | 1.800.245.1148 www.onlineatp.com
www.onlineatp.com | 34 |
 Why OZAT?
Less Stress Design:
OZAT socket design is clearly superior to most other sockets available. Their state of the
art electro-chemically machined process makes it possible for OZAT to produce all of
their sockets in the less-stress™ design illustrated below.

Without these special machining capabilities, cost of producing the preferred less-stress
sockets becomes prohibitive. While other manufacturers, who use the normal broaching
method to achieve the hex pattern in their sockets, may have to compromise in their
selection of suitable steel, OZAT is able to specify the most perfectly matched material
from which to manufacture the most durable and reliable sockets available.

The OZAT difference results in longer socket and fastener life and cost savings to the user.

OZAT VS. OTHER SOCKETS

Load on flank of
Nut or Bolt

Clearance
at Corner Load on
Corner Only
OZAT OTHER

Availability:
ATP / OZAT Sockets are available in 1/2” through 3 1/2” Square Drive and in #4 and #5
Spline sizes, in 4 point, 6 point, 8 point, 12 point, Standard depth, Deep length, Thin
walls, Hex bit, “In-Star” type bits, Magnetic bits, Railroad sockets and Torsion bars.
Custom sockets
Sockets quoted
quoted upon
upon request,
request. see page 87.

Statement of Warranty:
The OZAT warranty provides for free replacement, to the original purchaser, of any qualifying
socket found to be defective in either material or workmanship, as indicated by breakage
or premature wear. Determination of free replacement will be made after examination by
ATP. Impact sockets, by their application, are subject to extreme stresses. Therefore
special application sockets such as thinwall, hex driver, In-Star driver, and accessories are
specifically excluded from the replacement warranty.

Products returned to ATP for warranty consideration must be shipped prepaid, with an
ATP returned goods authorization (RGA) number issued by the customer service department.

ATP/OZAT impact sockets and accessories are available exclusively through leading
industrial distributors nationwide.

For the name of a distributor in your area contact ATP at 1-800-245-1148.

1.800.245.1148 www.onlineatp.com
| 35 | 1.800.245.1148 | 42 |
www.onlineatp.com
 OZAT Contents
1/2
1/2 Inch
Inch Square
Square Drive
Drive 45
37
Six
Six Point Impact Sockets
Point Impact Sockets
In-star
In-star Drivers
Drivers && Sockets
Sockets
Hex
Hex Driver
Driver and
and 1212Point
PointSockets
Sockets
Ret
Ret Rings
Rings
Power
Power Line
Line Utility
Utility Sockets
Sockets

5/8 Inch
5/8 Inch Square
Square Drive
Drive 44
52
Six Point
Six Point Impact
Impact Sockets
Sockets
Accessories
Accessories

3/4 Inch
3/4 Inch Square
Square Drive
Drive 46
54
Six Point Impact Sockets
Six Point Impact Sockets
BUDD Wheel
BUDD Wheel Sockets
Sockets
Hex Driver Sockets
Hex Driver Sockets
Double Square
Double Square Impact
Impact Sockets
Sockets
12 Point Sockets
12 Point Sockets
Accessories
Accessories
Railroad Sockets
Railroad Sockets 53
61

11 Inch
Inch Square
Square Drive
Drive 54
62
Six Point Impact Sockets
Six Point Impact Sockets
Hex Driver Sockets
Hex Driver Sockets
Double Square
Double Square Impact
Impact Sockets
Sockets
BUDD Wheel Sockets
BUDD Wheel Sockets
12 Point
12 Point Sockets
Sockets
Accessories
Accessories
1-1/2 Inch
1-1/2 Inch Square
Square Drive
Drive 61
69
Six Point Impact Sockets
Six Point Impact Sockets
12 Point
12 Point Sockets
Sockets
Accessories
Accessories

2-1/2 Inch
2-1/2 Inch Square
Square Drive
Drive 66
74
Six Point
Six Point Impact
Impact Sockets
Sockets
Accessories
Accessories

3-1/2 Inch
3-1/2 Inch Square
Square Drive
Drive 70
78
Six Point Impact Sockets
Six Point Impact Sockets
Accessories
Accessories
#5 Spline
#5 Spline Drive
Drive 72
80
#4 Spline
#4 Spline Sockets
Sockets &&Universal
UniversalJoint
Joint 72
82
Six Point Impact Sockets
Six Point Impact Sockets 74
BUDD Wheel
74BUDD WheelSockets
Sockets
Accessories for
Accessories for #5#5 Spline
SplineDrive
Drive

Flat Striking
Flat Striking Wrenches
Wrenches (12
(12Point
PointOpening)
Opening) 75
83
Offset Striking
Offset Striking Wrenches
Wrenches (12
(12Point
PointOpening)
Opening) 77
85
Striking Wrench
Striking WrenchAdapter
Adapter 77
85
Strike Force
Torque Mark Safety Wrenches (12 Point Opening) 86
Multipliers 78
Torque Multipliers
Request for Quote (Special Socket Order) 79
87
Request for Quote (Special Socket Order) 80

|1.800.245.1148
43 | 1.800.245.1148 www.onlineatp.com
www.onlineatp.com | 36 |
 Usage and Safety Inspection
IMPACT SOCKETS, STRIKING WRENCHES, & ACCESSORIES
Safety For Productivity
• Users and bystanders must wear safety goggles conforming to ANSI Z87.1
• Do not hold sockets, extensions, and accessories while impacting or powering to avoid injury
• ¾” drive and larger sizes require the use of ret rings or a Pin & O-ring to secure the socket to the
drive
• Never use a nail or homemade pin to secure a socket to a drive
• Never exceed the manufacturer’s air tool pressure rating, and hydraulic pressure rating
• Never use a hand chrome socket for impacting or striking applications
• Impact sockets are used to tighten or loosen fasteners powered by air, hydraulic or electric tools
• Never dwell on a socket after it has stopped turning, this can damage both the socket and fastener
• Ensure the socket is fully engaged on the fastener before activating the power tool source
• Impact adapter strength is limited to the smallest drive size or connection point
• Always limit the joints and extensions between the socket and power tool to reduce failure
• Sockets must be properly sized and fitted to the fastener prior to use
• Large drive impact sockets are inherently heavy and care needs to be taken in handling
• Socket openings need to be inspected before each use, and discarded if significant wear or
deterioration is present
• Inspect and discard worn or cracked sockets at the drive opening and across the flats
• Striking wrenches must be properly sized and fitted to the fastener prior to use
• Striking to the wrench should only occur on the striking lug end, opposite the fastener engaged end
• Operators hand must be as far away from the striking lug during striking
• Striking wrench must be fully engaged on the fastener prior to striking
• The linear surface on a flat or offset striking wrench must be a true horizontal axis prior to striking
• Striking wrenches must be inspected prior to each use, and discarded if significant wear, cracks or
other damage is visually evident across the flats and striking lug surface
• Large size striking wenches are inherently heavy and care needs to be taken in handling

1.800.245.1148 www.onlineatp.com | 44 |
1/2” SQUARE DRIVE SIX POINT IMPACT SOCKETS
OZAT 1/2” Drive impact sockets are preferred in many industrial applications where long lasting
sockets are required for severe applications. From assembly lines to plant maintenance to
busy tire shops, OZAT sockets reduce cost and downtime.
Standard Fractional Sizes
SIZE PART# D1 D2 L T C
in in in in in in
3/8 Z-0806 .630 .984 1.482 .157 .595
7/16 Z-0807 .748 .984 1.482 .236 .595
1/2 Z-0808 .787 .984 1.482 .236 .674
D1
9/16 Z-0809 .866 .984 1.482 .276 .674
5/8 Z-0810 .984 1.181 1.482 .315 .753
11/16 Z-0811 1.102 1.181 1.482 .354 .753 T
C
3/4 Z-0812 1.102 1.181 1.482 .335 .753
13/16 Z-0813 1.181 1.181 1.482 .433 .832 L
7/8 Z-0814 1.181 1.181 1.482 .512 .91
15/16 Z-0815 1.378 1.181 1.482 .512 .91
1 Z-0816 1.496 1.181 1.482 .512 .95
1-1/16 Z-0817 1.496 1.181 1.950 .512 .95
D2
1-1/8 Z-0818 1.614 1.181 1.560 .643 1.107
1-3/16 Z-0819 1.614 1.181 1.950 .643 1.107
1-1/4 Z-0820 1.732 1.378 1.560 .669 1.107
1-5/16 Z-0821 1.732 1.378 1.677 .748 1.186
1-3/8 Z-0822 1.929 1.378 1.560 .748 1.265
1-7/16 Z-0823 1.929 1.732 1.950 .748 1.265
1-1/2 Z-0824 2.047 1.732 1.950 .846 1.344

Deep Fractional Sizes

SIZE PART# D1 D2 L T C
in in in in in in
3/8 Z-0806L .630 .984 3.042 .157 2.721
7/16 Z-0807L .748 .984 3.042 .236 2.721 D1
1/2 Z-0808L .787 .984 3.042 .236 2.721
9/16 Z-0809L .866 .984 3.042 .276 2.721
5/8 Z-0810L .984 1.181 3.042 .315 2.721 T
11/16 Z-0811L 1.102 1.181 3.042 .354 2.721
3/4 Z-0812L 1.102 1.181 3.042 .335 2.721 C
13/16 Z-0813L 1.181 1.181 3.042 .433 2.721 L
7/8 Z-0814L 1.181 1.181 3.042 .512 2.721
15/16 Z-0815L 1.378 1.181 3.042 .512 2.721
1 Z-0816L 1.496 1.181 3.042 .512 2.721
1-1/16 Z-0817L 1.496 1.181 3.042 .512 2.721
1-1/8 Z-0818L 1.614 1.181 3.042 .643 2.721
1 -3/16 Z-0819L 1.614 1.181 3.042 .643 2.721
D2
1 -1/4 Z-0820L 1.732 1.378 3.042 .669 2.721
1 -5/16 Z-0821L 1.732 1.378 3.042 .748 2.721
1 -3/8 Z-0822L 1.929 1.378 3.042 .748 2.721
1 -7/16 Z-0823L 1.929 1.732 3.042 .748 2.721
1 -1/2 Z-0824L 2.047 1.732 3.042 .846 2.721
D1
Standard Fractional Thinwall Sizes
SIZE PART# D1 D2 L T C
in in in in in in T
9/16 Z-0809T .866 .984 1.482 .551 .700 C
5/8 Z-0810T .984 .984 1.482 .551 .750 L

11/16 Z-0811T .984 .984 1.482 .551 .750

3/4 Z-0812T 1.102 1.181 1.482 .551 .750
13/16 Z-0813T 1.102 1.181 1.482 .551 .780
7/8 Z-0814T 1.181 1.181 1.482 .551 .780
15/16 Z-0815T 1.299 1.181 1.482 .551 .810
D2

| 45 | 1.800.245.1148 www.onlineatp.com
1/2” SQUARE DRIVE Deep Fractional Thinwall Sizes
SIX POINT IMPACT SOCKETS SIZE
in
PART# D1
in
D2
in
L
in
T
in
C
in
9/16 Z-0809LT .866 .984 3.042 .551 2.721
5/8 Z-0810LT .984 .984 3.042 .551 2.721
11/16 Z-0811LT .984 .984 3.042 .551 2.721
3/4 Z-0812LT 1.102 1.181 3.042 .551 2.721
13/16 Z-0813LT 1.102 1.181 3.042 .551 2.721
7/8 Z-0814LT 1.181 1.181 3.042 .551 2.721
15/16 Z-0815LT 1.299 1.181 3.042 .551 2.721
D1
Standard Metric Sizes
SIZE PART# D1 D2 L T C
T mm mm mm mm mm mm
8 Z-08M8 15 25 38 4 15
C 9 Z-08M9 16 25 38 4 15
L
10 Z-08M10 17 25 38 5 15
11 Z-08M11 19 21 38 5 15
12 Z-08M12 20 25 38 6 17
13 Z-08M13 21 25 38 6 17
14 Z-08M14 22 25 38 7 17
15 Z-08M15 24 30 38 7 19
D2 16 Z-08M16 25 30 38 7 19
17 Z-08M17 26 30 38 9 19
18 Z-08M18 28 30 38 9 19
19 Z-08M19 28 30 38 9.5 19
20 Z-08M20 30 30 38 10 21
21 Z-08M21 30 30 38 10 21
22 Z-08M22 33 30 38 10 21
23 Z-08M23 35 30 38 12 23
D1 24 Z-08M24 35 30 45 12 23
25 Z-08M25 35 30 45 13 24
26 Z-08M26 38 5 50 13 24
C T 27 Z-08M27 38 35 50 13 24
28 Z-08M28 38 35 50 14 25
L
29 Z-08M29 41 35 50 14 28
30 Z-08M30 41 35 50 16.5 28
31 Z-08M31 44 35 50 16.5 28
32 Z-08M32 44 35 50 16.5 28
D2 33 Z-08M33 44 35 50 17 28
34 Z-08M34 49 35 46 17 30
35 Z-08M35 49 35 50 19 31
36 Z-08M36 49 44 50 19 31
37 Z-08M37 52 44 47 19 31
38 Z-08M38 52 44 50 22 34

Standard Metric Thinwall Sizes

D1
SIZE PART# D1 D2 L T C
mm mm mm mm mm mm
T
13 Z-08M13T 21 25 38 6 18
14 Z-08M14T 22 25 38 7 18
C 15 Z-08M15T 24 30 38 7 19
L
16 Z-08M16T 25 30 38 7 19
17 Z-08M17T 25 30 38 9 19
18 Z-08M18T 25 30 38 9 19
19 Z-08M19T 28 30 38 9 19
20 Z-08M20T 28 30 38 10 20
D2 21 Z-08M21T 30 30 38 10 20
22 Z-08M22T 30 30 38 10 20
23 Z-08M23T 33 30 38 12 20
24 Z-08M24T 33 30 45 12 20

1.800.245.1148 www.onlineatp.com | 46 |
1/2” SQUARE DRIVE SIX POINT IMPACT SOCKETS

Deep Metric Sizes

SIZE PART# D1 D2 L T C
mm mm mm mm mm mm
8 Z-08M8L 15 25 78 4 69
9 Z-08M9L 16 25 78 4 69
10 Z-08M10L 17 25 78 5 69
11 Z-08M11L 19 25 78 5 69
12 Z-08M12L 20 25 78 6 69
13 Z-08M13L 21 25 78 6 69
14 Z-08M14L 22 25 78 7 69
D1
15 Z-08M15L 24 30 78 7 69
16 Z-08M16L 25 30 78 7 69
17 Z-08M17L 26 30 78 9 69 T
18 Z-08M18L 28 30 78 9 69
19 Z-08M19L 28 30 78 9.5 69
C
20 Z-08M20L 30 30 78 10 69
L
21 Z-08M21L 30 30 78 10 69
22 Z-08M22L 33 30 78 10 69
23 Z-08M23L 35 30 78 12 69
24 Z-08M24L 35 30 78 12 69
25 Z-08M25L 35 30 78 13 69
26 Z-08M26L 38 35 78 13 69
D2
27 Z-08M27L 38 35 78 13 69
28 Z-08M28L 38 35 78 14 69
29 Z-08M29L 41 35 78 14 69
30 Z-08M30L 41 35 78 16.5 69
31 Z-08M31L 44 35 78 16.5 69
32 Z-08M32L 44 35 78 16.5 69
33 Z-08M33L 44 35 78 17 69
34 Z-08M34L 49 35 78 17 69
35 Z-08M35L 49 35 78 19 69
36 Z-08M36L 49 44 78 19 69
37 Z-08M37L 52 44 78 19 69
38 Z-08M38L 52 44 78 22 69

Deep Metric Thinwall Sizes

SIZE PART# D1 D2 L T C
mm mm mm mm mm mm D1
13 Z-08M13LT 21 25 78 6 69
14 Z-08M14LT 22 25 78 7 69
15 Z-08M15LT 24 30 78 7 69 T
16 Z-08M16LT 25 30 78 7 69
17 Z-08M17LT 25 30 78 9 69 C
L
18 Z-08M18LT 25 30 78 9 69
19 Z-08M19LT 28 30 78 9 69
20 Z-08M20LT 28 30 78 10 69
21 Z-08M21LT 30 30 78 10 69
22 Z-08M22LT 30 30 78 10 69
23 Z-08M23LT 33 30 78 12 69
24 Z-08M24LT 33 30 78 12 69 D2

| 47 | 1.800.245.1148 www.onlineatp.com
1/2” SQUARE DRIVE
HEX DRIVER SOCKETS

Bit Holders
PART# DESCRIPTION

Z-08H11 1/2” Sq. x 11mm Hex Bit Holder

Z-08H16 1/2” Sq. x 16mm Hex Bit Holder

D1
In-Star Impact Socket Sizes
t TORX® PART# D1 D2 L T WEIGHT
mm mm mm mm gr
L E10 Z-08E10 15 25 38 9 85
E11 Z-08E11 15.5 25 38 9 85
E12 Z-08E12 16 25 38 10 91
E14 Z-08E14 18.5 25 38 12 91
D2 E16 Z-08E16 20 25 38 12 95
E18 Z-08E18 22 25 38 12 95
E20 Z-08E20 25 30 38 13 140
E22 Z-08E22 26.5 30 45 15 158
E24 Z-08E24 28.5 30 45 17 161

In-Star Socket Driver Sizes

TORX® PART# D2 L T Weight REPLACEMENT BIT DESCRIPTION
mm mm mm gr TORX® BIT
T30 Z-08T30 25 57 3.19 110 HT30 11 mm HEX x 30
T40 Z-08T40 25 57 3.3 110 HT40 11 mm HEX x 40
T50 Z-08T50 25 57 4.57 110 HT50 11 mm HEX x 50
T55 Z-08T55 25 57 5.08 110 HT55 16 mm HEX x 55
T60 Z-08T60 30 60 7.62 160 HT60 16 mm HEX x 60
T70 Z-08T70 30 60 8.89 170 HT70 16 mm HEX x 70

TORX® is a Registered Trademark of Cam Car

D2

1.800.245.1148 www.onlineatp.com | 48 |
1/2” SQUARE DRIVE HEX DRIVER SOCKETS

Fractional Sizes Metric Sizes

SIZE PART# D2 L T SIZE PART# D2 L T T
in in in in mm mm mm mm
1/8 Z-0802H .984 1.716 .748 3 Z-08M3H 25 44 19
5/32 Z-08005H .984 1.716 .748 4 Z-08M4H 25 44 19
3/16
7/32
Z-0803H
Z-08007H
.984
.984
1.716
1.716
.748
.748
5
6
Z-08M5H
Z-08M6H
25
25
44
44
19
19
L
1/4 Z-0804H .984 1.716 .748 8 Z-08M8H 25 44 19
5/16 Z-0805H .984 1.716 .748 10 Z-08M10H 25 47 22
3/8 Z-0806H .984 1.833 .866 12 Z-08M12H 30 50 25
7/16 Z-0807H .984 1.950 .984 14 Z-08M14H 30 50 25
1/2 Z-0808H 1.181 1.950 .984 17 Z-08M17H 30 50 25
9/16 Z-0809H 1.181 1.950 .984 19 Z-08M19H 33 50 25
5/8 Z-0810H 1.181 1.950 .984
Note: 1 piece construction D2
Note: 1 piece construction

2-Part In-Hex Sizes

HEX HEX PART# D2 L T Weight REPLACEMENT
in mm mm mm mm gr TORX® BIT
1/8 Z-0802V 25 54 6 90 H02
5/32 Z-08025V 25 54 6 90 H025
3/16 Z-0803V 25 54 8 90 H03 T
7/32 Z-08035V 25 54 9 90 H035
1/4 Z-0804V 25 57 12 100 H04
5/16 Z-0805V 25 57 12 100 H05
3/8 Z-0806V 25 57 16 100 H06 L
7/16 Z-0807V 25 57 18 100 H07
1/2 Z-0808V 30 57 19 150 H08
9/16 Z-0809V 30 57 21 150 H09
5/8 Z-0810V 30 57 24 150 H10
3 Z-08M03V 25 54 5 90 HM03
4 Z-08M04V 25 54 6 90 HM04
5 Z-08M05V 25 54 8 90 HM05
D2
6 Z-08M06V 25 54 9 100 HM06
8 Z-08M08V 25 57 12 100 HM08
10 Z-08M10V 25 57 16 100 HM10
12 Z-08M12V 30 57 18 150 HM12
14 Z-08M14V 30 57 21 150 HM14
17 Z-08M17V 30 57 26 150 HM17
19 Z-08M19V 30 72 26 150 HM19
Note: 2 piece construction

12 Point Impact Socket Sizes

SIZE SIZE PART# D1 D2 L T Weight
in mm mm mm mm mm gr
3/4 19 DH-0812M19 28 30 38 9.5 130
13/16 DH-0813 30 30 38 11 130 D1
7/8 DH-0814 32 32 38 13 140
15/16 DH-0815 35 35 38 13 160 T
1 DH-0816 38 35 38 13 200 C
1-1/16 27 DH-0817M27 38 35 50 13 200
1-1/8 DH-0818 41 35 40 16.5 290 L
1 3/16 30 DH-0819M30 41 35 50 16.5 290
1-1/4 DH-0820 44 35 40 17 350
1-5/16 DH-0821 49 35 43 19 370
D2
1-3/8 35 DH-0822M35 49 35 50 19 370
1-7/16 DH-0823 49 44 50 19 370
1-1/2 38 DH-0824M38 52 44 50 22 400

| 49 | 1.800.245.1148 www.onlineatp.com
1/2” SQUARE DRIVE
ACCESSORIES
Adapters
PART# FEMALE MALE L
in in in
L A0810 1/2 5/8 1.38
A0812 1/2 3/4 1.69

D2
Double Ended
Female Adapters
PART# D1 D2 L D
in in in in
L
AN0808 1/2 1/2 1.29 .984
AN1008 5/8 1/2 1.61 1.38
AN1208 3/4 1/2 1.93 1.73
D1
D

Universal Joint
SIZE PART#
in
1/2 U0808

Extensions
PART# D L
in in
E0803 1.181 3
E0805 1.181 5
L
E0810 1.181 10

Retaining Pins and Rings

SQUARE SOCKET PIN# RING# d L D
DRIVE SIZES in in in
D L 1/2 Up To 9/16” (14mm) P0825 R0825 .117 .780 .741
1/2 From 9/16” To 1-3/16” (30mm) P0830 R0830 .117 .975 .936
1/2 Above 1-3/16” (30mm) P0835 R0835 .117 1.17 1.17

1.800.245.1148 www.onlineatp.com | 50 |
 UTILITY SOCKETS TIRE SHOP FLIP SOCKETS
⁄2” SQUARE
PART# SIZE
1/2”
1
SQUAREDRIVE
DRIVE
UTILITY SOCKETS (POWER LINE SOCKETS)
Z-081315S5 - 13/16” x 15/16” D-1213 3/4 X 13/16
Z-081618S5 - 1” X 1-1/8” D-19M21 19MM X 21MM
Specifically designed for hydraulic wrenches and impact wrenches

UTILITY SOCKETS TIRE SHOP FLIP SOCKETS

SQUARE DRIVE ADAPTER

5" OVERALL LENGTH

PART# SIZE
UTILITY SOCKETS (POWER LINE SOCKETS)
Z-081315S5 - 13/16” x 15/16” D-1213 3/4 X 13/16
Z-081618S5 - 1” X 1-1/8” D-19M21 19MM X 21MM
Specifically designed for hydraulic wrenches and impact wrenches

D1
5" OVERALL LENGTH

D1
SQUARE DRIVE ADAPTOR Double Ended Male Adapters
7/16” Hex to 1/2” Square
DOUBLE ENDED MALE ADAPTORS
7/16” HEX TO 1/2” SQUARE PART# D1 L
D1
in in
PART# D1 L S-084874 .881 3
D1

S-084874-HD .881 2.25

S-O84874-HD 0.661 2.25

SQUARE DRIVE ADAPTOR

DOUBLE ENDED MALE ADAPTORS
7/16” HEX TO 1/2” SQUARE
PART# D1 L

S-O84874-HD 0.661 2.25 RETAINING RING®®

RETAINING RING
Ret Rings are tool accessories used to
attach impact sockets to the square drive
anvil. The ret ring is a one piece design
socket retainer with a steel insert
encapsulated to reinforce a stress point
RETAINING RING
between the socket®and anvil.

Specific
Ret Rings application part numbers
are tool accessories have
used to
been provided for each socket type,
attach impact sockets to the square drive
starting
anvil. Thewith 3/4”isdrive.
ret ring a one piece design
socket retainer with a steel insert
encapsulated to reinforce a stress point
between the socket and anvil.

Specific application part numbers have

| 43 | 1.800.245.1148 been provided for each socket type,
www.onlineatp.com
starting with 3/4” drive.

| |51
43| |1.800.245.1148
1.800.245.1148 www.onlineatp.com
www.onlineatp.com
5/8” SQUARE DRIVE
SIX POINT IMPACT SOCKETS
Why 5/8” drive? This unusual drive size was originally introduced in the 1930’s to eliminate the
“disappearing socket syndrome.” It remains popular in several applications today for the heavier wall
thickness than comparable 1/2” drive sockets.

Standard Fractional Sizes

SIZE PART# D1 D2 L T C
in in in in in in
1/2 Z-1008 .906 1.378 1.365 .236 .753
9/16 Z-1009 .945 1.378 1.365 .275 .753
D1
5/8 Z-1010 1.024 1.378 1.365 .315 .753
11/16 Z-1011 1.142 1.378 1.482 .354 .871
T 3/4 Z-1012 1.220 1.378 1.482 .375 .871
C
13/16 Z-1013 1.299 1.378 1.482 .433 .871
L 7/8 Z-1014 1.378 1.378 1.560 .512 .950
15/16 Z-1015 1.378 1.378 1.560 .512 .950
1 Z-1016 1.496 1.378 1.600 .512 .989
1-1/16 Z-1017 1.614 1.378 1.600 .512 .989
1-1/8 Z-1018 1.614 1.378 1.638 .650 1.147
D2
1-3/16 Z-1019 1.732 1.378 1.638 .650 1.147
1-1/4 Z-1020 1.732 1.378 1.794 .669 1.186
1-5/16 Z-1021 1.929 1.378 1.911 .748 1.265
1-3/8 Z-1022 1.929 1.378 1.989 .748 1.383
1-7/16 Z-1023 2.047 1.732 1.989 .748 1.383
1-1/2 Z-1024 2.126 1.732 1.989 .866 1.383

Deep Fractional Sizes

SIZE PART# D1 D2 L T C
in in in in in in
1/2 Z-1008L .906 1.378 3.465 .236 2.84
D1
9/16 Z-1009L .945 1.378 3.465 .275 2.84
5/8 Z-1010L 1.024 1.378 3.465 .315 2.84
11/16 Z-1011L 1.142 1.378 3.465 .354 2.84
T 3/4 Z-1012L 1.220 1.378 3.465 .375 2.84
13/16 Z-1013L 1.299 1.378 3.465 .433 2.84
C 7/8 Z-1014L 1.378 1.378 3.465 .512 2.84
L
15/16 Z-1015L 1.378 1 378 3.465 .512 2.84
1 Z-1016L 1.496 1 378 3.465 .512 2.84
1-1/16 Z-1017L 1.614 1.378 3 465 .512 2.84
1-1/8 Z-1018L 1.614 1.378 3 465 .650 2.84
1 -3/16 Z-1019L 1.732 1 378 3.465 .650 2.84
1-1/4 Z-1020L 1.732 1.378 3.465 .669 2.84
1 -5/16 Z-1021L 1.929 1 378 3.465 .748 2.84
D2
1 -3/8 Z-1022L 1.929 1.378 3.465 .748 2.84
1-7/16 Z-1023L 2.047 1 732 3.465 .748 2.84
1-1/2 Z-1024L 2.126 1.732 3.465 .866 2.84

1.800.245.1148 www.onlineatp.com | 52 |
5/8” SQUARE DRIVE SIX POINT IMPACT SOCKETS
Standard Metric Sizes Deep Metric Sizes
SIZE PART# D1 D2 L T C SIZE PART# D1 D2 L T C
mm mm mm mm mm mm mm mm mm mm mm mm
13 Z-10M13 23 35 35 6 19 13 Z-10M13L 23 35 88 6 72
14 Z-10M14 24 35 35 7 19 14 Z-10M14L 24 35 88 7 72
15 Z-10M15 26 35 35 7 19 15 Z-10M15L 26 35 88 7 72
16 Z-10M16 26 35 35 7 19 16 Z-10M16L 26 35 88 7 72
17 Z-10M17 28 35 38 9 22 17 Z-10M17L 28 35 88 9 72
18 Z-10M18 30 35 38 9 22 18 Z-10M18L 30 35 88 9 72
19 Z-10Ml9 31 35 38 9.5 22 19 Z-10M19L 31 35 88 9.5 72
20 Z-10M20 32 35 38 10 22 20 Z-10M20L 32 35 88 10 72
21 Z-10M21 33 35 38 10 22 21 Z-10M21L 33 35 88 10 72
22 Z-10M22 35 35 40 10 24 22 Z-10M22L 35 35 88 10 72
23 Z-10M23 35 35 40 12 24 23 Z-10M23L 35 35 88 12 72
24 Z-10M24 35 35 40 12 24 24 Z-10M24L 35 35 88 12 72
25 Z-10M25 38 35 41 13 25 25 Z-10M25L 38 35 88 13 72
26 Z-10M26 38 35 41 13 25 26 Z-10M26L 38 35 88 13 72
27 Z-10M27 41 35 42 13 25 27 Z-10M27L 41 35 88 13 72
28 Z-10M28 41 35 42 14 26 28 Z-10M28L 41 35 88 14 72
29 Z-10M29 41 35 45 14 29 29 Z-10M29L 41 35 88 14 72
30 Z-10M30 44 35 45 16.5 29 30 Z-10M30L 44 35 88 16.5 72
31 Z-10M31 44 35 46 16.5 42 31 Z-10M31L 44 35 88 16.5 72
32 Z-10M32 44 35 47 16.5 42 32 Z-10M32L 44 35 88 16.5 72
33 Z-10M33 44 35 47 17 31 33 Z-10M33L 44 35 88 17 72
34 Z-10M34 49 35 50 17 34 34 Z-10M34L 49 35 88 17 72
35 Z-10M35 49 35 51 19 35 35 Z-10M35L 49 35 88 19 72
36 Z-10M36 52 35 51 19 35 36 Z-10M36L 52 35 88 19 72
37 Z-10M37 54 44 51 19 35 37 Z-10M37L 54 44 88 19 72
38 Z-10M38 54 44 51 22 35 38 Z-10M38L 54 44 88 22 72

ACCESSORIES
Adapters Universal Joint
PART# FEMALE MALE L L
SIZE PART#
in in in in
A1008 5/8 1/2 1.90 5/8 U1010
A1012 5/8 3/4 1.77

Double Ended D2 Double Ended

Female Adapters Male Extensions
PART# D1 D2 L D PART# D L
in in in in L
in in
AN1008 5/8 1/2 1.61 1.38 Z1002 0.830 2 L
AN1010 5/8 5/8 1.38 1.38 Z1003 0.830 3
AN1210 3/4 5/8 1.97 1.73 D1
Z1006 0.830 6
D Z1012 0.83 12

Retaining Pins and Rings

SQUARE SOCKET PIN# RING# d L D
DRIVE SIZES in in in D L
5/8 Up To 1-3/16” (30mm) P1035 R1035 .117 1.070 1.092
5/8 Above 1-3/16” (30mm) P1044 R1044 .117 1.521 1.443
d

| 53 | 1.800.245.1148 www.onlineatp.com
3/4” SQUARE DRIVE
SIX POINT IMPACT SOCKETS
OZAT 3/4” drive sockets (and larger) are also available by special order as Spark Resistant for use in
mines, chemical plants, grain processors and anywhere explosive conditions exist.

Standard Fractional Sizes Deep Fractional Sizes

SIZE PART# D1 D2 L T C RET SIZE PART# D1 D2 L T C RET
in in in in in in RING in in in in in in RING
1/2 Z-1208 .945 1.732 1.755 .236 .772 10032S 1/2 Z-1208L .945 1.732 3.510 .236 2.543 10032S
9/16 Z-1209 .984 1.732 1.755 .276 .772 10032S 9/16 Z-1209L .984 1.732 3.510 .276 2 543 10032S
5/8 Z-1210 1.102 1.732 1.755 .315 .772 10032S 5/8 Z-1210L 1.102 1.732 3.510 .315 2.543 10032S
11/16 Z-1211 1.142 1.732 1.755 .354 .772 10032S 11/16 Z-1211L 1.142 1.732 3.510 .354 2.543 10032S
3/4 Z-1212 1.260 1.732 1.755 .372 .772 10032S 3/4 Z-1212L 1.260 1.732 3.510 .372 2.543 10032S
13/16 Z-1213 1.378 1.732 1.794 .433 .890 10032S 13/16 Z-1213L 1.378 1.732 3.510 .433 2.543 10032S
7/8 Z-1214 1.496 1.732 1.794 .512 .890 10032S 7/8 Z-1214L 1.496 1.732 3.510 .512 2.543 10032S
15/16 Z-1215 1 575 1.732 1.794 .512 .890 10032S 15/16 Z-1215L 1.575 1.732 3.510 .512 2.543 10032S
1 Z-1216 1.614 1.732 1.794 .512 .890 10032S 1 Z-1216L 1.614 1.732 3.510 .512 2.543 10032S
1-1/16 Z-1217 1.732 1.732 2.028 .512 1.047 10032S 1-1/16 Z-1217L 1.732 1.732 3.510 .512 2.543 10032S
1-1/8 Z-1218 1.732 1.732 2.028 .650 1.047 10032S 1-1/8 Z-1218L 1.732 1.732 3.510 .650 2.543 10032S
1-3/16 Z-1219 1.732 1.732 2.028 .650 1.047 10032S 1-3/16 Z-1219L 1.732 1.732 3.510 .650 2.543 10032S
1-1/4 Z-1220 1.929 1.732 2.028 .650 1.047 10032S 1-1/4 Z-1220L 1.929 1.732 3.510 .669 2.543 10032S
1-5/16 Z-1221 1.929 1.732 2.145 .748 1.165 10032S 1-5/16 Z-1221L 1.929 1.732 3.510 .748 2.543 10032S
1-3/8 Z-1222 2.047 1.732 2.145 .748 1.165 10032S 1-3/8 Z-1222L 2.047 1.732 3.510 .748 2.543 10032S
1-7/16 Z-1223 2.047 1.732 2.184 .748 1.205 10032S 1-7/16 Z-1223L 2.047 1.732 3.510 .748 2.543 10032S
1-1/2 Z-1224 2.126 1.732 2.301 .866 1.283 10032S 1-1/2 Z-1224L 2.126 1.732 3.510 .866 2.543 10032S
1-9/16 Z-1225 2.244 1.732 2.301 .866 1.283 10032S 1-9/16 Z-1225L 2.244 1.732 3.510 .866 2.543 10032S
1-5/8 Z-1226 2.244 1.732 2.301 .866 1.283 10032S 1-5/8 Z-1226L 2.244 1.732 3.510 .866 2.543 10032S
1-11/16 Z-1227 2.480 1.732 2.496 .984 1.441 10032S 1-11/16 Z-1227L 2.480 1.732 3.510 .984 2.543 10032S
1-3/4 Z-1228 2.480 1.732 2.496 .995 1.480 10032S 1-3/4 Z-1228L 2.480 1.732 3.510 .995 2.543 10032S
1-13/16 Z-1229 2.638 1.732 2.496 .995 1.480 10032S 1-13/16 Z-1229L 2.638 1.732 3.510 .995 2.543 10032S
1-7/8 Z-1230 2.638 2.126 2.613 1.062 1.598 10010S 1-7/8 Z-1230L 2.638 2.126 3.510 1.062 2.543 10010S
1-15/16 Z-1231 2.756 2.126 2.613 1.062 1.598 10010S 1-15/16 Z-1231L 2.756 2.126 3.510 1.062 2.543 10010S
2 Z-1232 2.874 2.126 2.613 1.062 1.598 10010S 2 Z-1232L 2.874 2.126 3.510 1.062 2.543 10010S
2-1/16 Z-1233 2.874 2.126 2.769 1.181 1.756 10010S 2-1/16 Z-1233L 2.874 2.126 3.666 1.181 2.701 10010S
2-1/8 Z-1234 2.874 2.126 2.769 1.181 1.795 10010S 2-1/8 Z-1234L 2.874 2.126 3.666 1.181 2.740 10010S
2-3/16 Z-1235 3.071 2.126 2.886 1.260 1.795 10010S 2-3/16 Z-1235L 3.071 2.126 3.666 1.260 2.740 10010S
2-1/4 Z-1236 3.228 2.126 2.925 1.299 1.913 10010S 2-1/4 Z-1236L 3.228 2.126 3.822 1.299 2.858 10010S
2-5/16 Z-1237 3.228 2.126 2.925 1.299 1.953 10010S 2-5/16 Z-1237L 3.228 2.126 3.822 1.299 2.898 10010S
2-3/8 Z-1238 3.228 2.126 2.925 1.378 1.953 10010S 2-3/8 Z-1238L 3.228 2.126 3.822 1.378 2.898 10010S

D1
D1
T
T
C
C
L
L

D2
D2

1.800.245.1148 www.onlineatp.com | 54 |
3/4” SQUARE DRIVE SIX POINT IMPACT SOCKETS

Standard Metric Sizes Deep Metric Sizes

SIZE PART# D1 D2 L T C RET SIZE PART# D1 D2 L T C RET
mm mm mm mm mm mm RING mm mm mm mm mm mm RING
13 Z-12M13 25 44 45 6 20 10032S 13 Z-12M13L 25 44 90 6 65 10032S
14 Z-12M14 25 44 45 7 20 10032S 14 Z-12M14L 25 44 90 7 65 10032S
15 Z-12M15 28 44 45 7 20 10032S 15 Z-12M15L 28 44 90 7 65 10032S
16 Z-12M16 29 44 45 7 20 10032S 16 Z-12M16L 29 44 90 7 65 10032S
17 Z-12M17 29 44 45 9 20 10032S 17 Z-12M17L 29 44 90 9 65 10032S
18 Z-12M18 32 44 45 9.5 20 10032S 18 Z-12M18L 32 44 90 9 65 10032S
19 Z-12M19 32 44 45 9.5 20 10032S 19 Z-12M19L 32 44 90 9.5 65 10032S
20 Z-12M20 35 44 46 10 21 10032S 20 Z-12M20L 35 44 90 10 65 10032S
21 Z-12M21 35 44 46 10 21 10032S 21 Z-12M21L 35 44 90 10 65 10032S
22 Z-12M22 38 44 46 10 21 10032S 22 Z-12M22L 38 44 90 10 65 10032S
23 Z-12M23 38 44 46 12 21 10032S 23 Z-12M23L 38 44 90 12 65 10032S
24 Z-12M24 40 44 46 12 21 10032S 24 Z-12M24L 40 44 90 12 65 10032S
25 Z-12M25 41 44 46 13 21 10032S 25 Z-12M25L 41 44 90 13 65 10032S
26 Z-12M26 41 44 46 13 21 10032S 26 Z-12M26L 41 44 90 13 65 10032S
27 Z-12M27 41 44 48 13 23 10032S 27 Z-12M27L 41 44 90 13 65 10032S
28 Z-12M28 44 44 48 14 23 10032S 28 Z-12M28L 44 44 90 14 65 10032S
29 Z-12M29 44 44 52 14 27 10032S 29 Z-12M29L 44 44 90 14 65 10032S
30 Z-12M30 44 44 52 16.5 27 10032S 30 Z-12M30L 44 44 90 16.5 65 10032S
31 Z-12M31 49 44 52 16.5 27 10032S 31 Z-12M31L 49 44 90 16.5 65 10032S
32 Z-12M32 49 44 52 16.5 27 10032S 32 Z-12M32L 49 44 90 16.5 65 10032S
33 Z-12M33 49 44 55 17 30 10032S 33 Z-12M33L 49 44 90 17 65 10032S
34 Z-12M34 52 44 55 17 30 10032S 34 Z-12M34L 52 44 90 17 65 10032S
35 Z-12M35 52 44 55 19 30 10032S 35 Z-12M35L 52 44 90 19 65 10032S
36 Z-12M36 52 44 56 19 31 10032S 36 Z-12M36L 52 44 90 19 65 10032S
37 Z-12M37 54 44 56 19 31 10032S 37 Z-12M37L 54 44 90 19 65 10032S
38 Z-12M38 54 44 59 22 34 10032S 38 Z-12M38L 54 44 90 22 65 10032S
39 Z-12M39 57 44 59 21.5 34 10032S 39 Z-12M39L 57 44 90 21.5 65 10032S
40 Z-12M40 57 44 59 21.5 34 10032S 40 Z-12M40L 57 44 90 21.5 65 10032S
41 Z-12M41 57 44 59 22 34 10032S 41 Z-12M41L 57 44 90 22 65 10032S
42 Z-12M42 60 44 59 21.5 34 10032S 42 Z-12M42L 60 44 90 21.5 65 10032S
43 Z-12M43 63 44 64 25 39 10032S 43 Z-12M43L 63 44 90 25 65 10032S
44 Z-12M44 63 44 64 21.5 39 10032S 44 Z-12M44L 63 44 90 21.5 65 10032S
45 Z-12M45 63 44 64 21.5 39 10032S 45 Z-12M45L 63 44 90 21.5 65 10032S
46 Z-12M46 67 44 64 25.5 39 10032S 46 Z-12M46L 67 44 90 25.5 65 10032S
47 Z-12M47 67 54 64 23.5 39 10010S 47 Z-12M47L 67 54 90 23.5 65 10010S
48 Z-12M48 67 54 67 23.5 42 10010S 48 Z-12M48L 67 54 90 23.5 65 10010S
49 Z-12M49 70 54 67 27 42 10010S 49 Z-12M49L 70 54 90 27 65 10010S
50 Z-12M50 70 54 67 23.5 42 10010S 50 Z-12M50L 70 54 90 23.5 65 10010S
51 Z-12M51 73 54 67 27 42 10010S 51 Z-12M51L 73 54 94 27 65 10010S
52 Z-12M52 73 54 70 27 45 10010S 52 Z-12M52L 73 54 94 27 65 10010S
54 Z-12M54 78 54 71 30 46 10010S 54 Z-12M54L 78 54 94 30 69 10010S
55 Z-12M55 78 54 71 27 46 10010S 55 Z-12M55L 78 54 94 27 69 10010S
56 Z-12M56 78 54 74 28 49 10010S 56 Z-12M56L 78 54 98 28 69 10010S
57 Z-12M57 82 54 75 33 50 10010S 57 Z-12M57L 82 54 98 33 73 10010S
58 Z-12M58 82 54 75 28 50 10010S 58 Z-12M58L 82 54 98 28 73 10010S
59 Z-12M59 82 54 75 33 50 10010S 59 Z-12M59L 82 54 98 33 73 10010S
60 Z-12M60 82 54 75 28 50 10010S 60 Z-12M60L 82 54 98 28 73 10010S
61 Z-12M61 86 54 75 28 50 10010S 61 Z-12M61L 86 54 98 28 73 10010S

D1
Budd Wheel Socket Sizes
SIZE PART# D1 D2 L T RET T
in in in in in RING
13/16 Z-1213B 1.653 1.732 1.950 .433 10032S L
13/16 Z-1213BL 1.653 1.732 3.510 .433 10032S
13/16 X 1-1/12 Z-1224BS 2.126 1.732 3.510 .571 10032S
D2

| 55 | 1.800.245.1148 www.onlineatp.com
3/4” SQUARE DRIVE
SIX POINT IMPACT SOCKETS Standard Fractional
Thinwall Sizes
SIZE PART# D1 D2 L T C RET
in in in in in in RING
11/16 Z-1211T 1.102 1.732 1.755 .354 .969 10032S
3/4 Z-1212T 1.181 1.732 1.755 .375 .969 10032S
D1 13/16 Z-1213T 1.378 1.732 1.794 .433 .969 10032S
7/8 Z-1214T 1.378 1.732 1.794 .512 .969 10032S
15/16 Z-1215T 1.378 1.732 1.794 .512 .969 10032S
1 Z-1216T 1.496 1.732 1.794 .512 .969 10032S
T
1-1/16 Z-1217T 1.614 1.732 1.872 512 1.047 10032S
C 1-1/8 Z-1218T 1.614 1.732 2.028 .650 1.047 10032S
L 1-3/16 Z-1219T 1.732 1.732 2.028 .650 1.047 10032S
1-1/4 Z-1220T 1.732 1.732 2.028 .669 1.047 10032S
1-5/16 Z-1221T 1 929 1.732 2.145 .748 1.165 10032S
1-3/8 Z-1222T 2.047 1.732 2.145 .748 1.165 10032S
1-7/16 Z-1223T 2.047 1.732 2.184 .748 1.205 10032S
1-1/2 Z-1224T 2.126 1.732 2.301 .866 1.283 10032S
1-9/16 Z-1225T 2.126 1.732 2.301 .866 1.283 10032S
D2 1-5/8 Z-1226T 2.126 1.732 2.301 .866 1.283 10032S
1-11/16 Z-1227T 2.362 1.732 2.496 .984 1.441 10032S
1-3/4 Z-1228T 2.362 1.732 2.496 .995 1.480 10032S
1-13/16 Z-1229T 2.480 1.732 2.496 .995 1.480 10032S

Standard Metric Thinwall Sizes

SIZE PART# D1 D2 L T C RET
in in in in in in RING
17 Z-12M17T 28 44 45 9 20 10032S
18 Z-12M18T 30 44 45 9 20 10032S
19 Z-12M19T 30 44 45 9.5 21 10032S
20 Z-12M20T 30 44 46 10 21 10032S
21 Z-12M21T 35 44 46 10 21 10032S
22 Z-12M22T 35 44 46 10 21 10032S
23 Z-12M23T 35 44 46 12 21 10032S
24 Z-12M24T 38 44 46 12 21 10032S
25 Z-12M25T 38 44 46 13 21 10032S
26 Z-12M26T 41 44 46 13 21 10032S
27 Z-12M27T 41 44 48 13 23 10032S
28 Z-12M28T 41 44 48 14 23 10032S
29 Z-12M29T 41 44 52 14 27 10032S
30 Z-12M30T 41 44 52 16.5 27 10032S
31 Z-12M31T 44 44 52 16.5 27 10032S
32 Z-12M32T 48 44 52 16.5 27 10032S
33 Z-12M33T 48 44 55 17 30 10032S
34 Z-12M34T 49 44 55 17 30 10032S
35 Z-12M35T 50 44 55 19 30 10032S
36 Z-12M36T 52 44 56 19 31 10032S
37 Z-12M37T 52 44 56 19 31 10032S
38 Z-12M38T 52 44 59 22 34 10032S
39 Z-12M39T 54 44 59 21.5 34 10032S
40 Z-12M40T 54 44 59 21.5 34 10032S
41 Z-12M41T 54 44 59 22 34 10032S
42 Z-12M42T 57 44 59 21.5 34 10032S
43 Z-12M43T 60 44 64 25 39 10032S
44 Z-12M44T 60 44 64 21 5 39 10032S
45 Z-12M45T 60 44 64 21.5 39 10032S
46 Z-12M46T 63 44 64 25.5 39 10032S

1.800.245.1148 www.onlineatp.com | 56 |
3/4” SQUARE DRIVE SIX POINT IMPACT SOCKETS

Deep Fractional Thinwall Sizes

SIZE PART# D1 D2 L T C RET
in in in in in in RING
11/16 Z-1211LT 1.102 1.732 3.510 0.709 2.543 10032S
3/4 Z-1212LT 1.181 1.732 3.510 0.748 2.543 10032S D1
13/16 Z-1213LT 1.378 1.732 3.510 0.866 2.543 10032S
7/8 Z-1214LT 1.378 1.732 3.510 1.024 2.543 10032S
15/16 Z-1215LT 1.378 1.732 3.510 1.024 2.543 10032S
1 Z-1216LT 1.496 1.732 3.510 1.024 2.543 10032S T
1-1/16 Z-1217LT 1.614 1.732 3.510 1.024 2.543 10032S
1-1/8 Z-1218LT 1.614 1.732 3.510 1.299 2.543 10032S C
1-3/16 Z-1219LT 1.732 1 732 3.510 1.299 2.543 10032S L
1-1/4 Z-1220LT 1.732 1.732 3.510 1.339 2.543 10032S
1-5/16 Z-1221LT 1.929 1.732 3.510 1.496 2.543 10032S
1-3/8 Z-1222LT 2.047 1.732 3.510 1.496 2.543 10032S
1-7/16 Z-1223LT 2.047 1.732 3.510 1.496 2.543 10032S
1-1/2 Z-1224LT 2.126 1.732 3.510 1.732 2.543 10032S
1-9/16 Z-1225LT 2.126 1.732 3.510 1.732 2.543 10032S
1-5/8 Z-1226LT 2.126 1.732 3.510 1.732 2.543 10032S
1-11/16 Z-1227LT 2.362 1.732 3.510 1.969 2.543 10032S D2
1-3/4 Z-1228LT 2.362 1.732 3.510 2.008 2.543 10032S
1-13/16 Z-1229LT 2.480 1.732 3.510 2.008 2.543 10032S

Deep Metric Thinwall Sizes

SIZE PART# D1 D2 L T C RET
in in in in in in RING
17 Z-12M17LT 28 44 90 18 65 10032S
18 Z-12M18LT 30 44 90 18 65 10032S
19 Z-12M19LT 30 44 90 19 65 10032S
20 Z-12M20LT 30 44 90 20 65 10032S
21 Z-12M21LT 35 44 90 20 65 10032S
22 Z-12M22LT 35 44 90 20 65 10032S
23 Z-12M23LT 35 44 90 24 65 10032S
24 Z-12M24LT 38 44 90 24 65 10032S
25 Z-12M25LT 38 44 90 26 65 10032S
26 Z-12M26LT 41 44 90 26 65 10032S
27 Z-12M27LT 41 44 90 26 65 10032S
28 Z-12M28LT 41 44 90 28 65 10032S
29 Z-12M29LT 41 44 90 28 65 10032S
30 Z-12M30LT 41 44 90 33 65 10032S
31 Z-12M31LT 44 44 90 33 65 10032S
32 Z-12M32LT 48 44 90 33 65 10032S
33 Z-12M33LT 48 44 90 34 65 10032S
34 Z-12M34LT 49 44 90 34 65 10032S
35 Z-12M35LT 50 44 90 38 65 10032S
36 Z-12M36LT 52 44 90 38 65 10032S
37 Z-12M37LT 52 44 90 38 65 10032S
38 Z-12M38LT 52 44 90 44 65 10032S
39 Z-12M39LT 54 44 90 43 65 10032S
40 Z-12M40LT 54 44 90 43 65 10032S
41 Z-12M41LT 54 44 90 44 65 10032S
42 Z-12M42LT 57 44 90 43 65 10032S
43 Z-12M43LT 60 44 90 50 65 10032S
44 Z-12M44LT 60 44 90 43 65 10032S
45 Z-12M45LT 60 44 90 43 65 10032S
46 Z-12M46LT 63 44 90 51 65 10032S

| 57 | 1.800.245.1148 www.onlineatp.com
3/4” SQUARE DRIVE
HEX DRIVER SOCKETS
Fractional Sizes Metric Sizes
T SIZE PART# D2 L T RET SIZE PART# D2 L T RET
in in in in RING mm mm mm mm RING
3/8 Z-1206H 1.496 2.637 1.130 10005S 10 Z-12M10H 38 67 29 10005S
7/16 Z-1207H 1.496 2.637 1.13 10005S 12 Z-12M12H 38 67 29 10005S
L 1/2 Z-1208H 1.496 2.637 1.130 10005S 14 Z-12M14H 38 67 29 10005S
9/16 Z-1209H 1.496 2.637 1.130 10005S 17 Z-12M17H 38 67 29 10005S
5/8 Z-1210H 1.496 2.637 1.130 10005S 19 Z-12M19H 44 67 29 10032S
3/4 Z-1212H 1.732 2.637 1.130 10032S 22 Z-12M22H 44 71 33 10032S
13/16 Z-1213H 1.732 2.795 1.295 10032S 24 Z-12M24H 44 71 33 10032S
7/8 Z-1214H 1.732 2.795 1.295 10032S
Note: 1 piece construction
1 Z-1216H 1.732 2.795 1.295 10032S
D2 Note: 1 piece construction

2-Part In-Hex Sizes

HEX HEX PART# D2 L T Weight RET REPLACEMENT
in mm mm mm mm gr RING TORX® BIT
3/8 Z-1206V 38 69 16 310 10005S H06
T 7/16 Z-1207V 38 69 18 310 10005S H07
1/2 Z-1208V 38 69 19 310 10005S H08
9/16 Z-1209V 38 69 21 310 10005S H09
L 5/8 Z-1210V 38 69 24 310 10005S H10
3/4 Z-1212V 44 69 26 630 10032S H12
13/16 Z-1213V 44 84 26 630 10032S H13
7/8 Z-1214V 44 84 26 630 10032S H14
1 Z-1216V 44 104 30 630 10032S H16
D2 10 Z-12M10V 38 69 16 310 10005S HM10
12 Z-12M12V 38 69 18 310 10005S HM12
14 Z-12M14V 38 69 21 310 10005S HM14
17 Z-12M17V 38 69 26 310 10005S HM17
19 Z-12M19V 44 84 26 630 10032S HM19
22 Z-12M22V 44 84 26 630 10032S HM22
24 Z-12M24V 44 84 26 630 10032S HM24

Note: 2 piece construction

DOUBLE SQUARE EIGHT POINT IMPACT SOCKETS

Standard Fractional Sizes Deep Fractional Sizes

SIZE PART# D1 D2 L T C RET SIZE PART# D1 D2 L T C RET
in in in in in in RING in in in in in in RING
1-1/4 DS-1220 2.362 1.732 2.067 .669 1.087 10032S 1-1/4 DS-1220L 2.362 1.732 3.159 .669 2.189 10032S
1-5/16 DS-1221 2.480 1.732 2.067 .748 1.087 10032S 1-5/16 DS-1221L 2.480 1.732 3.159 .748 2.189 10032S
1-3/8 DS-1222 2.638 1.732 2.067 .748 1.087 10032S 1-3/8 DS-1222L 2.638 1.732 3.159 .748 2.189 10032S
1-7/16 DS-1223 2.638 1.732 2.223 .748 1.244 10032S 1-7/16 DS-1223L 2.638 1.732 3.159 .748 2.189 10032S
1-1/2 DS-1224 2.638 1.732 2.223 .866 1.244 10032S 1-1/2 DS-1224L 2.638 1.732 3.159 .866 2.189 10032S
1-9/16 DS-1225 3.071 2.126 2.223 .866 1.244 10010S 1-9/16 DS-1225L 3.071 2.126 3.159 .866 2.189 10010S
1-5/8 DS-1226 3.071 2.126 2.223 .866 1.244 10010S 1-5/8 DS-1226L 3.071 2.126 3.159 .866 2.189 10010S
1-11/16 DS-1227 3.228 2.126 2.418 .984 1.441 10010S 1-11/16 DS-1227L 3.228 2.126 3.159 .984 2.189 10010S
1-3/4 DS-1228 3.228 2.126 2.457 1.005 1.480 10010S 1-3/4 DS-1228L 3.228 2.126 3.159 1.005 2.189 10010S
1-13/16 DS-1229 3.228 2.126 2.457 1.005 1.480 10010S 1-13/16 DS-1229L 3.228 2.126 3.159 1.005 2.189 10010S
1-7/8 DS-1230 3.228 2.126 2.535 1.063 1.559 10010S 1-7/8 DS-1230L 3.228 2.126 3.159 1.063 2.189 10010S

1.800.245.1148 www.onlineatp.com | 58 |
3/4” SQUARE DRIVE 12 POINT IMPACT SOCKETS

12 Point Impact Socket Sizes

SIZE SIZE PART# D1 D2 L T Weight RET
in mm mm mm mm mm gr RING
3/4 19 DH-1212M19 32 44 45 9.5 290 10032S
15/16 DH-1215 40 44 46 13.0 340 10032S
1 DH-1216 41 44 46 13.0 340 10032S
1-1/16 27 DH-1217M27 41 44 48 13.0 340 10032S
1-1/8 DH-1218 44 44 52 16.5 380 10032S D1
1-3/16 30 DH-1219M30 44 44 52 16.5 380 10032S
1-1/4 DH-1220 49 44 52 17.0 420 10032S
1-5/16 DH-1221 49 44 55 19.0 430 10032S
33 DH-12M33 49 44 55 17.0 430 10032S T
34 DH-12M34 52 44 55 19.0 460 10032S C
1-3/8 35 DH-1222M35 52 44 55 19.0 460 10032S
36 DH-12M36 52 44 55 19.0 460 10032S
L
1-7/16 DH-1223 52 44 56 19.0 460 10032S
37 DH-12M37 54 44 56 19.0 490 10032S
1-1/2 38 DH-1224M38 54 44 59 22.0 490 10032S
39 DH-12M39 57 44 59 22.0 520 10032S
D2
1-9/16 DH-1225 57 44 59 22.0 520 10032S
40 DH-12M40 57 44 59 22.0 520 10032S
1-5/8 41 DH-1226M41 57 44 59 22.0 520 10032S
42 DH-12M42 60 44 59 22.0 520 10032S
1-11/16 43 DH-1227M43 63 44 64 25.0 600 10032S
44 DH-12M44 63 44 64 25.0 600 10032S
1-3/4 DH-1228 63 44 64 25.0 600 10032S
45 DH-12M45 63 44 64 25.0 600 10032S
1-13/16 46 DH-1229M46 67 44 64 25.0 850 10032S
47 DH-12M47 67 54 64 25.0 850 10010S
1-7/8 DH-1230 67 54 67 27.0 910 10010S
48 DH-12M48 67 54 67 27.0 910 10010S
1-15/16 49 DH-1231M49 70 54 67 27.0 950 10010S
50 DH-12M50 70 54 67 27.0 950 10010S
2 51 DH-1232M51 73 54 67 27.0 1040 10010S
52 DH-12M52 73 54 70 27.0 1040 10010S
2-1/16 DH-1233 73 54 71 30.0 1040 10010S
2-1/8 54 DH-1234M54 73 54 71 30.0 1040 10010S
55 DH-12M55 78 54 71 30.0 1200 10010S
2-3/16 DH-1235 78 54 74 32.0 1200 10010S
56 DH-12M56 78 54 74 32.0 1200 10010S
2-1/4 57 DH-1236M57 82 54 75 33.0 1320 10010S
58 DH-12M58 82 54 75 33.0 1320 10010S
2-5/16 59 DH-1237M59 82 54 75 33.0 1320 10010S
60 DH-12M60 82 54 75 33.0 1320 10010S
2-3/8 DH-1238 82 54 75 35.0 1320 10010S
61 DH-12M61 86 54 75 35.0 1430 10010S

| 59 | 1.800.245.1148 www.onlineatp.com
3/4” SQUARE DRIVE
ACCESSORIES
Universal
Joint
SIZE PART# RET
in RING
3/4 U1212 10032S

Adapters
PART# FEMALE MALE L RET
L
in in in RING
A1208 3/4 1/2 2.165 10032S
A1210 3/4 5/8 2.244 10032S
A1216 3/4 1 2.322 10032S

Double Ended
D2 Female Adapters
PART# D1 D2 L D RET RINGS
in in in in (D1) (D2)
L
AN1208 3/4 1/2 1.93 1.73 10032S 10005S
AN1210 3/4 5/8 1.97 1.73 10032S 10005S
AN1212 3/4 3/4 1.93 1.73 10032S 10032S
D1
AN1612 1 3/4 2.48 2.13 10008S 10032S
D

Double Ended
Extensions Male Extensions
PART# D L RET D PART# D L
in in RING in in
E1203 1.732 3 10032S Z1202 1 2
E1204 1.732 4 10032S Z1203 1 3
L Z1204 1 4
E1205 1.732 5 10032S
E1207 1.732 7 10032S Z1205 1 5
E1213 1.732 13 10032S L Z1207 1 7
Z1210 1 10
Z1213 1 13
Z1215 1 15
Z1216 1 16
D

Retaining Pins and Rings

SQUARE SOCKET PIN# RING# d L D
D L DRIVE SIZES in in in
3/4 Up To 1-13/16” (46mm) P1244 R1244 .156 1.365 1.404
3/4 Above 1-13/16” (46mm) P1254 R1254 .156 1.750 1.794
d

1.800.245.1148 www.onlineatp.com | 60 |
RAILROAD SOCKETS

3/4” SQUARE DRIVE:

DOUBLE SQUARE EIGHT POINT IMPACT SOCKETS
Standard Fractional Sizes Deep Fractional Sizes
SIZE PART# D1 D2 L T C RET SIZE PART# D1 D2 L T C RET
in in in in in in RING in in in in in in RING
1-1/4 DS-1220 2.362 1.732 2.067 .669 1.087 10032S 1-1/4 DS-1220L 2.362 1.732 3.159 .669 2.189 10032S
1-5/16 DS-1221 2.480 1.732 2.067 .748 1.087 10032S 1-5/16 DS-1221L 2.480 1.732 3.159 .748 2.189 10032S
1-3/8 DS-1222 2.638 1.732 2.067 .748 1.087 10032S 1-3/8 DS-1222L 2.638 1.732 3.159 .748 2.189 10032S
1-7/16 DS-1223 2.638 1.732 2.223 .748 1.244 10032S 1-7/16 DS-1223L 2.638 1.732 3.159 .748 2.189 10032S
1-1/2 DS-1224 2.638 1.732 2.223 .866 1.244 10032S 1-1/2 DS-1224L 2.638 1.732 3.159 .866 2.189 10032S
1-9/16 DS-1225 3.071 2.126 2.223 .866 1.244 10010S 1-9/16 DS-1225L 3.071 2.126 3.159 .866 2.189 10010S
1-5/8 DS-1226 3.071 2.126 2.223 .866 1.244 10010S 1-5/8 DS-1226L 3.071 2.126 3.159 .866 2.189 10010S
1-11/16 DS-1227 3.228 2.126 2.418 .984 1.441 10010S 1-11/16 DS-1227L 3.228 2.126 3.159 .984 2.189 10010S
1-3/4 DS-1228 3.228 2.126 2.457 1.005 1.480 10010S 1-3/4 DS-1228L 3.228 2.126 3.159 1.005 2.189 10010S
1-13/16 DS-1229 3.228 2.126 2.457 1.005 1.480 10010S 1-13/16 DS-1229L 3.228 2.126 3.159 1.005 2.189 10010S
1-7/8 DS-1230 3.228 2.126 2.535 1.063 1.559 10010S 1-7/8 DS-1230L 3.228 2.126 3.159 1.063 2.189 10010S

1” SQUARE DRIVE:
DOUBLE SQUARE EIGHT POINT IMPACT SOCKETS
Standard Fractional Sizes Deep Fractional Sizes
SIZE PART# D1 D2 L T C RET SIZE PART# D1 D2 L T C RET
in in in in in in RING in in in in in in RING
1-5/16 DS-1621 2.480 2.126 2.262 .748 1.283 10010S 1-5/16 DS-1621L 2.480 2.126 3.159 .748 2.189 10010S
1-3/8 DS-1622 2.638 2.362 2.262 .748 1.283 10015S 1-3/8 DS-1622L 2.638 2.362 3.159 .748 2.189 10015S
1-7/16 DS-1623 2.638 2.362 2.262 .748 1.283 10015S 1-7/16 DS-1623L 2.638 2.362 3.159 .748 2.189 10015S
1-1/2 DS-1624 2.756 2.362 2.418 .866 1 441 10015S 1-1/2 DS-1624L 2.756 2.362 3.393 .866 2.322 10015S
1-9/16 DS-1625 3.071 2.362 2.418 .866 1 441 10015S 1-9/16 DS-1625L 3.071 2.362 3.432 .866 2.322 10015S
1-5/8 DS-1626 3.071 2.362 2.418 .866 1 441 10015S 1-5/8 DS-1626L 3.071 2.362 3.432 .866 2.322 10015S
1-11/16 DS-1627 3.228 2.362 2.613 .984 1.638 10015S 1-11/16 DS-1627L 3.228 2.362 3.432 .984 2.322 10015S
1-3/4 DS-1628 3.228 2.362 2.613 1.005 1.638 10015S 1-3/4 DS-1628L 3.228 2.362 3.432 1.005 2.322 10015S
1-13/16 DS-1629 3.386 2.362 2.613 1.005 1.638 10015S 1-13/16 DS-1629L 3.386 2.362 3.432 1.005 2.322 10015S
1-7/8 DS-1630 3.386 2.362 2.730 1 063 1 756 10015S 1-7/8 DS-1630L 3.386 2.362 3.432 1.063 2.322 10015S
2 DS-1632 3.622 2.362 2.730 1 063 1 756 10015S 2 DS-1632L 3.622 2.362 3.432 1.063 2.322 10015S
2-1/8 DS-1634 3.937 2.362 2.925 1.181 1.953 10015S 2-1/8 DS-1634L 3.937 2.362 3.783 1.181 2.819 10015S
2-3/16 DS-1635 3.937 2.362 3.042 1.260 2.071 10015S 2-3/16 DS-1635L 3.937 2.362 3.783 1.260 2.819 10015S
2-1/4 DS-1636 3.937 2.362 3.042 1.260 2.071 10015S 2-1/4 DS-1636L 3.937 2.362 3.900 1.260 2.937 10015S
2-3/8 DS-1638 4.134 2.362 3.198 1.378 2.228 10015S 2-3/8 DS-1638L 4.134 2.362 3.900 1.378 2.937 10015S
2-1/2 DS-1640 4.291 2.362 3.432 1.378 2.465 10015S 2-1/2 DS-1640L 4.291 2.362 3.900 1.378 2.937 10015S
Note: Metric Sizes 35, 38, 41, 46, 51, 54, 57 are also available by special Note: Metric Sizes 35, 38, 41, 46, 51, 54, 57 are also available by special
order. (POA) order. (POA)

SPECIAL RAILROAD SOCKETS Part# Description Size Length

AN2424 Double ended female adaptor 1-1/2” x 1-1/2” sq. 3.35”
PART# DESCRIPTION RET Z2410 Double ended male adaptor 1-1/2” x 1-1/2” sq. 10”
RING
Z-161418RTL 7/8 X 1-1/8 Rectangle X 1 sq. 10008S Part# Female Male Taper Length
Z-16T70 70mm X 1 sq. Torx Bit Socket 10008S
HEX-3 1-1/2” sq. 3/4” sq. to 1-7/8” sq 10”
N7167A Domed Head Socket w/Pins, 1” sq. drive 10015S
HEX-3-10 1-1/2” sq. 3/4” sq. to 1/7/8” sq. 20”
Railroad Sockets are also available in square 4 point and rectangular HEX-12 2-1/2” sq. 3/4” sq. to 1-7/8” sq 12”
4 point tapered to fit Lag Screws by special order. (POA)

| 61 | 1.800.245.1148 www.onlineatp.com
1” SQUARE DRIVE Standard Fractional Sizes
SIZE PART# D1 D2 L T C RET
in in in in in in RING
SIX POINT IMPACT SOCKETS 3/4
13/16
Z-1612
Z 1613
1.417
1.496
2.126
2.126
2.145
2.145
.374
.433
1.040
1.040
10010S
10010S
7/8 Z-1614 1.575 2.126 2.145 .551 1.040 10010S
ATP maintains “in stock” one of the broadest 15/16 Z-1615 1.614 2.126 2.145 .551 1.040 10010S
1 Z-1616 1.693 2.126 2.145 .551 1.119 10010S
ranges of 1” drive sockets available to industry. 1-1/16 Z-1617 1.811 2.126 2.145 .551 1.119 10010S
OZAT 1” drive sizes are equally well suited for 1-1/8 Z-1618 1.890 2.126 2.223 .650 1.119 10010S
construction, maintenance, and heavy assembly 1-3/16 Z-1619 1.969 2.126 2.223 .650 1.119 10010S
applications, as well as for precision bolting 1-1/4 Z-1620 2.008 2.126 2.223 .669 1.119 10010S
with hydraulic bolting equipment. 1-5/16 Z-1621 2.126 2.126 2.340 .748 1.198 10010S
1-3/8 Z-1622 2.126 2.126 2.340 .748 1.198 10010S
1-7/16 Z-1623 2.126 2.126 2.340 .748 1.198 10010S
1-1/2 Z-1624 2.362 2.126 2.496 .866 1.316 10010S
D1 1-9/16 Z-1625 2.362 2.126 2.496 .866 1.316 10010S
1-5/8 Z-1626 2.480 2.126 2.496 .866 1.316 10010S
1-11/16 Z-1627 2.638 2.126 2.691 .984 1.513 10010S
T 1-3/4 Z-1628 2.756 2.126 2.691 1.004 1.592 10010S
C 1-13/16 Z-1629 2.756 2.126 2.691 1.004 1.592 10010S
L 1-7/8 Z-1630 2.756 2.126 2.808 1.062 1.631 10010S
1-15/16 Z-1631 2.874 2.126 2.808 1.062 1.631 10010S
2 Z-1632 2.874 2.126 2.808 1.062 1.631 10010S
2-1/16 Z-1633 3.071 2.126 2.964 1.181 1.828 10010S
2-1/8 Z-1634 3.228 2.126 2.964 1.181 1.828 10010S
2-3/16 Z-1635 3.228 2.126 3.120 1.259 1.946 10010S
2-1/4 Z-1636 3.228 2.126 3.120 1.299 1.946 10010S
D2 2-5/16 Z-1637 3.386 2.126 3.198 1.299 2.025 10010S
2-3/8 Z-1638 3.386 2.126 3.315 1.378 2.418 10010S
2-7/16 Z-1639 3.622 2.126 3.315 1.378 2.418 10010S
2-1/2 Z-1640 3.622 2.126 3.315 1.378 2.418 10010S
2-9/16 Z-1641 3.622 2.126 3.315 1.378 2.458 10010S
2-5/8 Z-1642 3.622 2.126 3.432 1.496 2.536 10010S
2-11/16 Z-1643 3.780 2.126 3.432 1.496 2.576 10010S
2-3/4 Z-1644 3.780 2.126 3.432 1.496 2.615 10010S
2-13/16 Z-1645 3.937 3.386 3.588 1.575 2.615 10021S
2-7/8 Z-1646 3.937 3.386 3.588 1.614 2.615 10021S
2-15/16 Z-1647 3.937 3.386 3.588 1.614 2.615 10021S
3 Z-1648 4.134 3.386 3.783 1.732 2.655 10021S
3-1/16 Z-1649 4.134 3.386 3.783 1.732 2.655 10021S
3-1/8 Z-1650 4.134 3.386 3.783 1.732 2.655 10021S
3-3/16 Z-1651 4.291 3.386 3.900 1.850 2.812 10021S
3-1/4 Z-1652 4.291 3.386 3.900 1.850 2.812 10021S
3-5/16 Z-1653 4.291 3.386 3.900 1.850 2.812 10021S
3-3/8 Z-1654 4.291 3.386 4.056 1.929 2.930 10021S
3-7/16 Z-1655 4.764 3.386 4.056 1.929 2.930 10021S
3-1/2 Z-1656 4.764 3.386 4.056 1.929 2.930 10021S
3-9/16 Z-1657 5.000 3.386 4.056 1.890 2.930 10021S
3-5/8 Z-1658 5.118 3.386 4.056 1.929 2.930 10021S
3-11/16 Z-1659 5.118 3.386 4.056 1.929 2.930 10021S
3-3/4 Z-1660 5.315 3.386 4.134 1.929 3.245 10021S
3-13/16 Z-1661 5.315 3.386 4.368 2.125 3.245 10021S
3-7/8 Z-1662 5.315 3.386 4.368 2.125 3.245 10021S
3-15/16 Z-1663 5.315 3.386 4.368 2.125 3.245 10021S
4 Z-1664 5.512 5.000 4.368 2.125 3.245 *
4-1/16 Z-1665 4.512 5.000 4.368 2125 3 245 *
4-1/8 Z-1666 5.709 5.000 4.368 2125 3.245 *
4-3/16 Z-1667 5.709 5.000 4.758 2.441 3.245 *
4-1/4 Z-1668 5.709 5.000 4.758 2.441 3.599 *
4-5/16 Z-1669 5.906 5.000 4.758 2.441 3.599 *
4-3/8 Z-1670 5.906 5.000 4.758 2.441 3.599 *
4-7/16 Z-1671 6.102 5.000 4.758 2.441 3.599 *
4-1/2 Z-1672 6.102 5.000 4.758 2.441 3.599 *
* Requires retaining pin and ring, Pin = P16127, Ring = R16127
1.800.245.1148 www.onlineatp.com | 62 |
1” SQUARE DRIVE
Deep Fractional Sizes
SIZE PART# D1 D2 L T C RET
in in in in in in RING
SIX POINT IMPACT SOCKETS 3/4
13/16
Z-1612L
Z-1613L
1.417
1.496
2.126
2.126
3.900
3.900
0.374
0.433
2.812
2.812
10010S
10010S
7/8 Z-1614L 1.575 2.126 3.900 0.551 2.812 10010S
15/16 Z-1615L 1.614 2.126 3.900 0.551 2.812 10010S
1 Z-1616L 1.693 2.126 3.900 0.551 2.812 10010S
1-1/16 Z-1617L 1.811 2.126 3.900 0.551 2.812 10010S
1-1/8 Z-1618L 1.890 2.126 3.900 0.650 2.812 10010S
1-3/16 Z-1619L 1.969 2.126 3.900 0.650 2.812 10010S
1-1/4 Z-1620L 2.008 2.126 3.900 0.669 2.812 10010S
1-5/16 Z-1621L 2.126 2.126 3.900 0.748 2.812 10010S
1-3/8 Z-1622L 2.126 2.126 3.900 0.748 2.812 10010S
1-7/16 Z-1623L 2.126 2.126 3.900 0.748 2.812 10010S
1-1/2 Z-1624L 2.362 2.126 3.900 0.866 2.812 10010S
1 -9/16 Z-1625L 2.362 2.126 3.900 0.866 2.812 10010S
1-5/8 Z-1626L 2.480 2.126 3.900 0.866 2.812 10010S
1-11/16 Z-1627L 2.638 2.126 3.900 0.984 2.812 10010S
1-3/4 Z-1628L 2.756 2.126 3.900 1.004 2.812 10010S
1-13/16 Z-1629L 2.756 2.126 3.900 1.004 2.812 10010S
1-7/8 Z-1630L 2.756 2.126 3.900 1.062 2.812 10010S
1-15/16 Z-1631L 2.874 2.126 3.900 1.062 2.812 10010S
2 Z-1632L 2.874 2.126 3.900 1.062 2.812 10010S
2-1/16 Z-1633L 3.071 2.126 3.900 1.181 2.969 10010S
D1 2-1/8 Z-1634L 3.228 2.126 4.056 1.181 2.969 10010S
2-3/16 Z-1635L 3.228 2.126 4.095 1.259 3.088 10010S
2-1/4 Z-1636L 3.228 2.126 4.095 1.299 3.088 10010S
2-5/16 Z-1637L 3.386 2.126 4.368 1.299 3.166 10010S
T 2-3/8 Z-1638L 3.386 2.126 4.368 1.378 3.560 10010S
C 2-7/16 Z-1639L 3.622 2.126 4.602 1.378 3.560 10010S
2-1/2 Z-1640L 3.622 2.126 4.602 1.378 3.560 10010S
2-9/16 Z-1641L 3.622 2.126 4.602 1.378 3.599 10010S
L 2-5/8 Z-1642L 3.622 2.126 4.602 1.496 3.678 10010S
2-11/16 Z-1643L 3.780 2.126 4.836 1.496 3.718 10010S
2-3/4 Z-1644L 3.780 2.126 4.836 1.496 3.757 10010S
2-13/16 Z-1645L 3.937 3.386 4.836 1.575 3.757 10021S
2-7/8 Z-1646L 3.937 3.386 4.836 1.614 3.757 10021S
2-15/16 Z-1647L 3.937 3.386 4.836 1.614 3.757 10021S
3 Z-1648L 4.134 3.386 5.07 1.732 3.796 10021S
3-1/16 Z-1649L 4.134 3.386 5.07 1.732 3.796 10021S
D2 3-1/8 Z-1650L 4.134 3.386 5.148 1.732 3.796 10021S
3-3/16 Z-1651L 4.291 3.386 5.148 1.850 3.954 10021S
3-1/4 Z-1652L 4.291 3.386 5.148 1.850 3.954 10021S
3-5/16 Z-1653L 4.291 3.386 5.148 1.850 3.954 10021S
3-3/8 Z-1654L 4.291 3.386 5.460 1.929 4.072 10021S
3-7/16 Z-1655L 4.764 3.386 5.460 1.929 4.072 10021S
3-1/2 Z-1656L 4.764 3.386 5.460 1.929 4.072 10021S
3-9/16 Z-1657L 5.000 3.386 5.460 1.890 4.072 10021S
3-5/8 Z-1658L 5.118 3.386 5.460 1.929 4.072 10021S
3-11/16 Z-1659L 5.118 3.386 5.460 1.929 4.072 10021S
3-3/4 Z-1660L 5.315 3.386 5.460 1.929 4.387 10021S
3-13/16 Z-1661L 5.315 3.386 5.577 2.125 4.387 10021S
3-7/8 Z-1662L 5.315 3.386 5.577 2.125 4.387 10021S
3-15/16 Z-1663L 5.315 3.386 5.577 2.125 4.387 10021S
4 Z-1664L 5.512 5.000 5.577 2.125 4.387 *
4-1/16 Z-1665L 4.512 5.000 5.577 2.125 4.387 *
4-1/8 Z-1666L 5.709 5.000 5.577 2.125 4.387 *
4-3/16 Z-1667L 5.709 5.000 5.811 2.441 4.387 *
4-1/4 Z-1668L 5.709 5.000 5.811 2.441 4.741 *
4-5/16 Z-1669L 5.906 5.000 5.811 2.441 4.741 *
4-3/8 Z-1670L 5.906 5.000 5.811 2.441 4.741 *
4-7/16 Z-1671L 6.102 5.000 5.811 2.441 4.741 *
4-1/2 Z-1672L 6.102 5.000 5.811 2.441 4.741 *
* Requires retaining pin and ring, Pin = P16127, Ring = R16127
| 63 | 1.800.245.1148 www.onlineatp.com
1” SQUARE DRIVE
SIX POINT IMPACT SOCKETS

D1 Deep Fractional Thinwall Sizes

SIZE PART# D1 D2 L T C RET
in in in in in in RING
7/8 Z-1614LT 1.496 2.126 3.937 .500 2.812 10010S
15/16 Z-1615LT 1.496 2.126 3.937 .500 2.812 10010S
T 1
1-1/16
Z-1616LT
Z-1617LT
1.614
1.732
2.126
2.126
3.937
3.937
.500
.500
2.812
2.812
10010S
10010S
C 1-1/8 Z-1618LT 1.732 2.126 3.937 .500 2.812 10010S

L
1-3/16 Z-1619LT 1.929 2.126 3.937 1.299 2.812 10010S
1-1/4 Z-1620LT 1.929 2.126 3.937 1.339 2.812 10010S
1-5/16 Z-1621LT 2.047 2.126 3.937 1.496 2.812 10010S
1-3/8 Z-1622LT 2.047 2.126 3.937 1.496 2.812 10010S
1-7/16 Z-1623LT 2.126 2.126 3.937 1.496 2.812 10010S
1-1/2 Z-1624LT 2.224 2.126 3.937 1.732 2.812 10010S
1-9/16 Z-1625LT 2.244 2.126 3.937 1.732 2.812 10010S
1-5/8 Z-1626LT 2.362 2.126 3.937 1.732 2.812 10010S
1-11/16 Z-1627LT 2.480 2.126 3.937 1.968 2.812 10010S
1-3/4 Z-1628LT 2.638 2.126 3.937 2.008 2.812 10010S

D2
1-13/16 Z-1629LT 2.638 2.126 3.937 2.008 2.812 10010S

Deep Metric Thinwall Sizes

SIZE PART# D1 D2 L T C RET
mm mm mm mm mm mm RING
22 Z-16M22LT 38 54 100 20 71 10010S
23 Z-16M23LT 38 54 100 24 71 10010S
24 Z-16M24LT 38 54 100 24 71 10010S
25 Z-16M25LT 41 54 100 26 71 10010S
26 Z-16M26LT 44 54 100 26 71 10010S
27 Z-16M27LT 44 54 100 26 71 10010S
28 Z-16M28LT 44 54 100 28 71 10010S
29 Z-16M29LT 44 54 100 28 71 10010S
30 Z-16M30LT 49 54 100 33 71 10010S
31 Z-16M31LT 49 54 100 33 71 10010S
32 Z-16M32LT 49 54 100 33 71 10010S
33 Z-16M33LT 52 54 100 34 71 10010S
34 Z-16M34LT 52 54 100 34 71 10010S
35 Z-16M35LT 52 54 100 38 71 10010S
36 Z-16M36LT 54 54 100 38 71 10010S
37 Z-16M37LT 54 54 100 38 71 10010S
38 Z-16M38LT 54 54 100 43 71 10010S
39 Z-16M39LT 54 54 100 43 71 10010S
40 Z-16M40LT 54 54 100 43 71 10010S
41 Z-16M41LT 54 54 100 44 71 10010S
42 Z-16M42LT 54 54 100 44 71 10010S
43 Z-16M43LT 54 54 100 50 71 10010S
44 Z-16M44LT 54 54 100 50 71 10010S
45 Z-16M45LT 54 54 100 51 71 10010S
46 Z-16M46LT 54 54 100 51 71 10010S

See page 87 for information on “special” sockets. OZAT routinely manufactures extra deep,
extra heavy, spark resistant, special shape, or special drive type sockets.

1.800.245.1148 www.onlineatp.com | 64 |
1” SQUARE DRIVE SIX POINT IMPACT SOCKETS
Standard Metric Sizes Deep Metric Sizes
SIZE PART# D1 D2 L T C RET SIZE PART# D1 D2 L T C RET
mm mm mm mm mm mm RING mm mm mm mm mm mm RING
19 Z-16M19 36 54 55 9.5 26 10010S 19 Z-16M19L 36 54 100 9.5 71 10010S
20 Z-16M20 37 54 55 10 26 10010S 20 Z-16M20L 37 54 100 10 71 10010S
21 Z-16M21 38 54 55 10 26 10010S 21 Z-16M21L 38 54 100 10 71 10010S
22 Z-16M22 40 54 55 10 26 10010S 22 Z-16M22L 40 54 100 10 71 10010S
23 Z-16M23 41 54 55 12 26 10010S 23 Z-16M23L 41 54 100 12 71 10010S
24 Z-16M24 42 54 55 12 26 10010S 24 Z-16M24L 42 54 100 12 71 10010S
25 Z-16M25 43 54 55 13 26 10010S 25 Z-16M25L 43 54 100 13 71 10010S
26 Z-16M26 45 54 55 13 26 10010S 26 Z-16M26L 45 54 100 13 71 10010S
27 Z-16M27 46 54 55 13 26 10010S 27 Z-16M27L 46 54 100 13 71 10010S
28 Z-16M28 47 54 55 14 26 10010S 28 Z-16M28L 47 54 100 14 71 10010S
29 Z-16M29 48 54 57 14 28 10010S 29 Z-16M29L 48 54 100 14 71 10010S
30 Z-16M30 50 54 57 16.5 28 10010S 30 Z-16M30L 50 54 100 16.5 71 10010S
31 Z-16M31 51 54 57 16.5 28 10010S 31 Z-16M31L 51 54 100 16.5 71 10010S
32 Z-16M32 51 54 57 16.5 28 10010S 32 Z-16M32L 51 54 100 16.5 71 10010S
33 Z-16M33 54 54 57 17 28 10010S 33 Z-16M33L 54 54 100 17 71 10010S
34 Z-16M34 54 54 60 19 31 10010S 34 Z-16M34L 54 54 100 19 71 10010S
35 Z-16M35 54 54 60 19 31 10010S 35 Z-16M35L 54 54 100 19 71 10010S
36 Z-16M36 54 54 60 19 31 10010S 36 Z-16M36L 54 54 100 19 71 10010S
37 Z-16M37 57 54 60 19 31 10010S 37 Z-16M37L 57 54 100 19 71 10010S
38 Z-16M38 60 54 64 22 35 10010S 38 Z-16M38L 60 54 100 22 71 10010S
39 Z-16M39 60 54 64 21.5 35 10010S 39 Z-16M39L 60 54 100 21.5 71 10010S
40 Z-16M40 63 54 64 21.5 35 10010S 40 Z-16M40L 63 54 100 21.5 71 10010S
41 Z-16M41 63 54 64 22 35 10010S 41 Z-16M41L 63 54 100 22 71 10010S
42 Z-16M42 63 54 64 21.5 35 10010S 42 Z-16M42L 63 54 100 21.5 71 10010S
43 Z-16M43 67 54 69 25 40 10010S 43 Z-16M43L 67 54 100 25 71 10010S
44 Z-16M44 67 54 69 21.5 40 10010S 44 Z-16M44L 67 54 100 21.5 71 10010S
45 Z-16M45 70 54 69 21.5 40 10010S 45 Z-16M45L 70 54 100 21.5 71 10010S
46 Z-16M46 70 54 69 25.5 40 10010S 46 Z-16M46L 70 54 100 25.5 71 10010S
47 Z-16M47 70 54 69 23.5 40 10010S 47 Z-16M47L 70 54 100 23.5 71 10010S
48 Z-16M48 73 54 72 23.5 43 10010S 48 Z-16M48L 73 54 100 23.5 71 10010S
49 Z-16M49 73 54 72 27 43 10010S 49 Z-16M49L 73 54 100 27 71 10010S
50 Z-16M50 73 54 72 23.5 43 10010S 50 Z-16M50L 73 54 100 23.5 71 10010S
51 Z-16M51 73 54 72 27 43 10010S 51 Z-16M51L 73 54 100 27 71 10010S
52 Z-16M52 78 54 72 27 43 10010S 52 Z-16M52L 78 54 100 27 71 10010S
54 Z-16M54 82 54 76 30 47 10010S 54 Z-16M54L 82 54 104 30 75 10010S
55 Z-16M55 82 54 76 27 47 10010S 55 Z-16M55L 82 54 104 27 75 10010S
56 Z-16M56 82 54 75 28 46 10010S 56 Z-16M56L 82 54 105 28 76 10010S
57 Z-16M57 82 54 80 33 51 10010S 57 Z-16M57L 82 54 105 33 76 10010S
58 Z-16M58 86 54 75 28 46 10010S 58 Z-16M58L 86 54 105 28 76 10010S
59 Z-16M59 86 54 82 33 53 10010S 59 Z-16M59L 86 54 112 33 83 10010S
60 Z-16M60 86 54 75 28 46 10010S 60 Z-16M60L 86 54 105 28 83 10010S
61 Z-16M61 88 54 85 28 56 10010S 61 Z-16M61L 88 54 112 28 83 10010S
62 Z-16M62 92 54 85 35 56 10010S 62 Z-16M62L 92 54 118 35 89 10010S
65 Z-16M65 92 54 85 35 56 10010S 65 Z-16M65L 92 54 118 35 89 10010S
67 Z-16M67 92 54 88 38 62 10010S 67 Z-16M67L 92 54 118 38 89 10010S
70 Z-16M70 96 54 88 38 79 10010S 70 Z-16M70L 96 54 124 38 95 10010S
73 Z-16M73 100 86 92 41 83 10021S 73 Z-16M73L 100 86 124 41 95 10021S
75 Z-16M75 100 86 92 41 83 10021S 75 Z-16M75L 100 86 124 41 95 10021S
76 Z-16M76 105 86 97 44 68 10021S 76 Z-16M76L 105 86 130 44 101 10021S
80 Z-16M80 105 86 97 37 59 10021S 80 Z-16M80L 105 86 132 37 103 10021S
85 Z-16M85 115 86 100 40 63 10021S 85 Z-16M85L 115 86 132 40 103 10021S
86 Z-16M86 115 86 104 49 75 10021S 86 Z-16M86L 115 86 140 49 111 10021S
90 Z-16M90 127 86 104 43 68 10021S 90 Z-16M90L 127 86 140 43 111 10021S
95 Z-16M95 135 86 106 49 77 10021S 95 Z-16M95L 135 86 140 49 111 10021S
100 Z-16M100 135 86 112 54 83 10021S 100 Z-16M100L 135 86 143 54 114 10021S
105 Z-16M105 145 127 112 54 83 * 105 Z-16M105L 145 127 143 54 114 *
110 Z-16M110 150 127 122 62 93 * 110 Z-16M110L 150 127 149 62 120 *
115 Z-16M115 155 127 122 57 91 * 115 Z-16M115L 155 127 149 57 120 *
* Requires retaining pin and ring, Pin = P16127, Ring = R16127 * Requires retaining pin and ring, Pin = P16127, Ring = R16127
| 65 | 1.800.245.1148 www.onlineatp.com
1” SQUARE DRIVE
HEX DRIVER SOCKETS

Fractional Sizes Metric Sizes

T SIZE PART# D2 L T RET SIZE PART# D2 L T RET
in in in in RING mm mm mm mm RING
1/2 Z-1608H 2.126 2.91 1.16 10010S 10 Z-16M10H 2.126 2.91 1.16 10010S
9/16 Z-1609H 2.126 2.91 1.16 10010S 12 Z-16M12H 2.126 2.91 1.16 10010S
L 5/8 Z-1610H 2.126 2.91 1.16 10010S 14 Z-16M14H 2.126 2.91 1.16 10010S
3/4 Z-1612H 2.126 2.91 1.16 10010S 17 Z-16M17H 2.126 2.91 1.16 10010S
13/16 Z-1613H 2.126 3.07 1.32 10010S 19 Z-16M19H 2.126 2.91 1.16 10010S
7/8 Z-1614H 2.126 3.07 1.32 10010S 22 Z-16M22H 2.126 3.07 1.32 10010S
1 Z-1616H 2.126 3.07 1.32 10010S 24 Z-16M24H 2.126 3.07 1.32 10010S
1-1/16 Z-1617H 2.126 3.23 1.48 10010S 27 Z-16M27H 2.126 3.23 1.48 10010S
1-1/8 Z-1618H 2.126 3.23 1.48 10010S 30 Z-16M30H 2.126 3.23 1.48 10010S
D2 1-3/16 Z-1619H 2.126 3.23 1.48 10010S 32 Z-16M32H 2.126 3.43 1.68 10010S
1-1/4 Z-1620H 2.126 3.43 1.68 10010S
Note: 1 piece construction
Note: 1 piece construction

2-Part In-Hex Sizes

HEX HEX PART# D2 L T Weight RET REPLACEMENT
in mm mm mm mm gr RING TORX® BIT
1/2 Z-1608V 54 74 19 800 10010S H08
T 9/16 Z-1609V 54 74 21 800 10010S H09
5/8 Z-1610V 54 74 24 800 10010S H10
3/4 Z-1612V 54 74 26 800 10010S H12
L 13/16 Z-1613V 54 89 26 900 10010S H13
7/8 Z-1614V 54 89 26 900 10010S H14
1 Z-1616V 54 109 30 1000 10010S H16
1-1/6 Z-1617V 54 111 32 1000 10010S H17
1-1/8 Z-1618V 54 111 32 1000 10010S H18
D2 1-3/16 Z-1619V 54 115 36 1000 10010S H19
1-1/4 Z-1620V 54 117 38 1000 10010S H20
10 Z-16M10V 54 74 16 800 10010S HM10
12 Z-16M12V 54 74 18 800 10010S HM12
14 Z-16M14V 54 74 21 800 10010S HM14
17 Z-16M17V 54 74 26 800 10010S HM17
19 Z-16M19V 54 89 26 900 10010S HM19
22 Z-16M22V 54 89 26 900 10010S HM22
24 Z-16M24V 54 89 26 900 10010S HM24
27 Z-16M27V 54 111 32 1000 10010S HM27
30 Z-16M30V 54 115 36 1000 10010S HM30
32 Z-16M32V 54 117 38 1000 10010S HM32

Note: 2 piece construction

Budd Wheel Socket Sizes

D1 SIZE PART# D1 D2 L T RET
RING
T 17 mm Z-16M17B 40 mm 54 mm 55 mm 9 mm 10010S
21 mm Z-16M21B 47 mm 54 mm 55 mm 10 mm 10010S
L 13/16” Z-1613B 1.85” 2.126” 2.145” 0.472” 10010S
15/16” Z-1615B 2.07” 2.126” 2.340” 0.512” 10010S
13/16” Z-1613BL 1.85” 2.126” 3.900” 0.472” 10010S
D2 15/16” Z-1615BL 2.07” 2.126” 3.900” 0.512” 10010S
13/16” X 1-1/2” Z-1624BS 2.24” 2.126” 3.900” 0.571” 10010S

1.800.245.1148 www.onlineatp.com | 66 |
1” SQUARE DRIVE 12 POINT IMPACT SOCKETS
Standard Socket Sizes Standard Socket Sizes Cont.
SIZE SIZE PART# D1 D2 L T Weight RET SIZE SIZE PART# D1 D2 L T Weight RET
in mm mm mm mm mm gr RING in mm mm mm mm mm gr RING
3/4 19 DH-1612DM19 36 54 55 9.5 600 10010S 3-1/16 DH-1649 105 86 97 44.0 3200 10021S
13/16 DH-1613 38 54 55 11.0 600 10010S 3-1/8 DH-1650 105 86 97 44.0 3200 10021S
7/8 DH-1614 40 54 55 13.0 600 10010S 3-3/16 DH-1651 109 86 100 47.0 3200 10021S
15/16 DH-1615 41 54 55 13.0 600 10010S 3-1/4 DH-1652 109 86 100 47.0 3200 10021S
1 DH-1616 43 54 55 13.0 600 10010S 3-5/16 DH-1653 109 86 100 47.0 3200 10021S
1-1/16 27 DH-1617M27 46 54 55 13.0 600 10010S 3-3/8 86 DH-1654M86 115 86 104 49.0 3500 10021S
1-1/8 DH-1618 48 54 57 16.5 630 10010S 3-7/16 DH-1655 121 86 104 49.0 4120 10021S
1-3/16 30 DH-1619M30 50 54 57 16.5 630 10010S 3-1/2 DH-1656 121 86 104 49.0 4120 10021S
1-1/4 DH-1620 51 54 57 17.0 630 10010S 3-9/16 DH-1657 127 86 104 49.5 4400 10021S
1-5/16 DH-1621 54 54 60 19.0 650 10010S 3-5/8 DH-1658 130 86 104 49.0 4700 10021S
1-3/8 35 DH-1622M35 54 54 60 19.0 650 10010S 3-11/16 DH-1659 130 86 104 49.0 4700 10021S
1-7/16 DH-1623 54 54 60 19.0 650 10010S 3-3/4 95 DH-1660M95 135 86 106 49.0 5200 10021S
1-1/2 38 DH-1624M38 60 54 64 22.0 760 10010S 3-13/16 DH-1661 135 86 112 54.0 5200 10021S
1-9/16 DH-1625 60 54 64 22.0 760 10010S 3-7/8 DH-1662 135 86 112 54.0 5200 10021S
1-5/8 41 DH-1626M41 63 54 64 22.0 800 10010S 3-15/16 100 DH-1663M100 135 86 112 54.0 5200 10021S
1-11/16 43 DH-1627M43 67 54 69 25.0 950 10010S 4 DH-1664 140 127 112 54.0 5500 *
1-3/4 DH-1628 70 54 69 25.5 1000 10010S 4-1/16 DH-1665 140 127 112 54.0 5500 *
1-13/16 46 DH-1629M46 70 54 69 25.5 1000 10010S 4-1/8 105 DH-1666M105 145 127 112 54.0 7700 *
1-7/8 DH-1630 70 54 72 27.0 1000 10010S 4-3/16 DH-1667 145 127 122 62.0 8100 *
1-15/16 49 DH-1631M49 73 54 72 27.0 1080 10010S 4-1/4 DH-1668 145 127 122 62.0 8100 *
2 51 DH-1632M51 73 54 72 27.0 2080 10010S 4-5/16 110 DH-1669M110 150 127 122 62.0 8200 *
2-1/16 DH-1633 78 54 76 30.0 1240 10010S 4-3/8 DH-1670 150 127 122 62.0 8200 *
2-1/8 54 DH-1634M54 82 54 76 30.0 1400 10010S 4-7/16 DH-1671 150 127 122 62.0 9060 *
2-3/16 DH-1635 82 54 80 32.0 1400 10010S 4-1/2 DH-1672 150 127 122 62.0 9060 *
2-1/4 57 DH-1636M57 82 54 80 33.0 1400 10010S
* Requires retaining pin and ring, Pin = P16127, Ring = R16127
2-5/16 59 DH-1637M59 86 54 82 33.0 1500 10010S
2-3/8 DH-1638 86 54 85 35.0 1500 10010S
2-7/16 62 DH-1639M62 92 54 85 35.0 1800 10010S Deep Fractional Sizes
2-1/2 DH-1640 92 54 85 35.0 1800 10010S SIZE PART# D1 D2 L T C RET
2-9/16 65 DH-1641M65 92 54 85 25.0 1800 10010S in in in in in in RING
2-5/8 67 DH-1642M67 92 54 88 38.0 1800 10010S 2 DH-11632L 2.874 2.126 3.900 1.062 2.812 10010S
2-11/16 DH-1643 96 54 88 38.0 1800 10010S 2-3/16 DH-1635L 3.228 2.126 4.095 1.259 3.088 10010S
2-3/4 70 DH-1644M70 96 54 88 38.0 1800 10010S 2-3/8 DH-1638L 3.386 2.126 4.368 1.378 3.560 10010S
2-13/16 DH-1645 100 86 92 40.0 2700 10021S 2-9/16 DH-1641L 3.622 2.126 4.602 1.378 3.599 10010S
2-7/8 73 DH-1646M73 100 86 92 41.0 2700 10021S 2-3/4 DH-1644L 3.780 2.126 4.836 1.496 3.757 10010S
2-15/16 75 DH-1647M75 100 86 92 41.0 2700 10021S 2-15/16 DH-1647L 3.937 3.386 4.836 1.614 3.757 10021S
3 76 DH-1648M76 105 86 97 44.0 3200 10021S 3-1/8 DH-1650L 4.291 3.386 5.460 1.929 4.072 10021S

DOUBLE SQUARE EIGHT POINT SOCKETS

Standard Fractional Sizes Deep Fractional Sizes
SIZE PART# D1 D2 L T C RET SIZE PART# D1 D2 L T C RET
in in in in in in RING in in in in in in RING
1-5/16 DS-1621 2.480 2.126 2.262 .748 1.283 10010S 1-5/16 DS-1621L 2.480 2.126 3.159 .748 2.189 10010S
1-3/8 DS-1622 2.638 2.362 2.262 .748 1.283 10015S 1-3/8 DS-1622L 2.638 2.362 3.159 .748 2.189 10015S
1-7/16 DS-1623 2.638 2.362 2.262 .748 1.283 10015S 1-7/16 DS-1623L 2.638 2.362 3.159 .748 2.189 10015S
1-1/2 DS-1624 2.756 2.362 2.418 .866 1 441 10015S 1-1/2 DS-1624L 2.756 2.362 3.393 .866 2.322 10015S
1-9/16 DS-1625 3.071 2.362 2.418 .866 1 441 10015S 1-9/16 DS-1625L 3.071 2.362 3.432 .866 2.322 10015S
1-5/8 DS-1626 3.071 2.362 2.418 .866 1 441 10015S 1-5/8 DS-1626L 3.071 2.362 3.432 .866 2.322 10015S
1-11/16 DS-1627 3.228 2.362 2.613 .984 1.638 10015S 1-11/16 DS-1627L 3.228 2.362 3.432 .984 2.322 10015S
1-3/4 DS-1628 3.228 2.362 2.613 1.005 1.638 10015S 1-3/4 DS-1628L 3.228 2.362 3.432 1.005 2.322 10015S
1-13/16 DS-1629 3.386 2.362 2.613 1.005 1.638 10015S 1-13/16 DS-1629L 3.386 2.362 3.432 1.005 2.322 10015S
1-7/8 DS-1630 3.386 2.362 2.730 1 063 1 756 10015S 1-7/8 DS-1630L 3.386 2.362 3.432 1.063 2.322 10015S
2 DS-1632 3.622 2.362 2.730 1 063 1 756 10015S 2 DS-1632L 3.622 2.362 3.432 1.063 2.322 10015S
2-1/8 DS-1634 3.937 2.362 2.925 1.181 1.953 10015S 2-1/8 DS-1634L 3.937 2.362 3.783 1.181 2.819 10015S
2-3/16 DS-1635 3.937 2.362 3.042 1.260 2.071 10015S 2-3/16 DS-1635L 3.937 2.362 3.783 1.260 2.819 10015S
2-1/4 DS-1636 3.937 2.362 3.042 1.260 2.071 10015S 2-1/4 DS-1636L 3.937 2.362 3.900 1.260 2.937 10015S
2-3/8 DS-1638 4.134 2.362 3.198 1.378 2.228 10015S 2-3/8 DS-1638L 4.134 2.362 3.900 1.378 2.937 10015S
2-1/2 DS-1640 4.291 2.362 3.432 1.378 2.465 10015S 2-1/2 DS-1640L 4.291 2.362 3.900 1.378 2.937 10015S
Note: Metric Sizes 35, 38, 41, 46, 51, 54, 57 are also available by special order. (POA) Note: Metric Sizes 35, 38, 41, 46, 51, 54, 57 are also available by special order. (POA)
| 67 | 1.800.245.1148 www.onlineatp.com
1” SQUARE DRIVE
Universal
ACCESSORIES Joint
L SIZE PART# L (hole to hole) RET
in in RING
1 U1616 4.25 10010S

Adapters
PART# FEMALE MALE L RET
L
in in in RING
A1612 1 3/4 2.750 10010S
A1624 1 1-1/2 3.346 10010S
A1695 1 #5 Spline 4.330 10010S

D2 Double Ended
Female Adapters
PART# D1 D2 L D RET RINGS
L
in in in in (D1) (D2)
AN1612 1 3/4 2.48 2.13 10010S 10006S
AN1616 1 1 2.32 2.13 10010S 10010S
AN2416 1-1/2 1 3.27 3.39 10020S 10010S
D1
D

Double Ended
Extensions Male Extensions
PART# D L RET D PART# D L
in in RING in in
E1604 2.125 4 10010S Z1603 1.3 3
E1605 2.125 5 10010S Z1604 1.3 4
L
E1607 2.125 7 10010S Z1605 1.3 5
E1610 2.125 10 10010S Z1606 1.3 6
E1613 2.125 13 10010S L Z1607 1.3 7
Z1610 1.3 10
Z1613 1.3 13
Z1615 1.3 15
Z1616 1.3 16
D Z1617 1.3 17

Retaining Pins and Rings

SQUARE SOCKET PIN# RING# d L D
D L DRIVE SIZES in in in
1 Up To 2-3/4” (70mm) P1654 R1654 .195 1.750 1.750
1 From 2-3/4” To 3-15/16” (100mm) P1686 R1686 .195 3.000 3.000
1 Above 3-15/16” (100mm) P16127 R16127 .195 4.600 4.600
d

1.800.245.1148 www.onlineatp.com | 68 |
1-1/2” SQUARE DRIVE Standard Fractional Sizes
SIZE PART# D1 D2 L T C RET
SIX POINT IMPACT SOCKETS in in in in in in RING
1-5/16 Z-2421 2.402 3.386 2.925 .748 1.328 10021S
1-3/8 Z-2422 2.480 3.386 2.925 .748 1.328 10021S
The exceptional strength of the OZAT 1-1/2” drive 1-7/16 Z-2423 2.520 3.386 3.120 .748 1.525 10021S
sockets often makes them the preferred choice 1-1/2 Z-2424 2.520 3.386 3.120 .866 1.525 10021S
of hydraulic bolting specialties. 1-9/16 Z-2425 2.677 3.386 3.120 .866 1.525 10021S
1-5/8 Z-2426 2.795 3.386 3.120 .866 1.525 10021S
Specialty sockets for the precision bolting 1-11/16 Z-2427 2.874 3.386 3.120 .984 1.525 10021S
1-3/4 Z-2428 2.953 3.386 3.120 1.004 1.525 10021S
market are available from ATP 1-13/16 Z-2429 2.953 3.386 3.120 1.004 1.525 10021S
1-7/8 Z-2430 3.150 3.386 3.198 1.036 1.603 10021S
1-15/16 Z-2431 3.150 3.386 3.198 1.063 1.603 10021S
2 Z-2432 3.150 3.386 3.198 1.063 1.603 10021S
2-1/16 Z-2433 3.386 3.386 3.471 1.181 1.840 10021S
2-1/8 Z-2434 3.386 3.386 3.471 1.181 1.840 10021S
2-3/16 Z-2435 3.386 3.386 3.588 1.260 1.958 10021S
2-1/4 Z-2436 3.386 3.386 3.588 1.280 1.958 10021S
2-5/16 Z-2437 3.622 3.386 3.588 1.300 1.958 10021S
2-3/8 Z-2438 3.622 3.386 3.744 1.378 2 115 10021S
2-7/16 Z-2439 3.780 3.386 3.744 1.378 2.115 10021S
2-1/2 Z-2440 3.937 3.386 3.744 1.378 2.115 10021S
2-9/16 Z-2441 3.937 3.386 3.744 1.378 2.115 10021S
2-5/8 Z-2442 3.937 3.386 3.939 1.496 2.312 10021S
2-11/16 Z-2443 4.134 3.386 3.939 1.496 2.312 10021S
2-3/4 Z-2444 4.134 3.386 3.939 1.496 2.312 10021S
2-13/16 Z-2445 4.291 3.386 4.095 1.575 2.509 10021S
2-7/8 Z-2446 4.291 3.386 4.095 1.614 2.509 10021S
2-15/16 Z-2447 4.291 3.386 4.095 1.614 2.509 10021S
3 Z-2448 4.528 3.386 4.290 1.732 2.706 10021S
3-1/16 Z-2449 4.528 3.386 4.290 1.732 2.706 10021S
D1 3-1/8 Z-2450 4.528 3.386 4.290 1 770 2.706 10021S
3-3/16 Z-2451 4.764 3.386 4.524 1.850 3.099 10021S
3-1/4 Z-2452 4.764 3.386 4.524 1.850 3.099 10021S
3-5/16 Z-2453 4.764 3.386 4.524 1.850 3.099 10021S
T
C 3-3/8 Z-2454 5.000 3.386 4.524 1.930 3.099 10021S
3-7/16 Z-2455 5.000 3.386 4.602 1.930 3.099 10021S
L 3-1/2 Z-2456 5.118 3.386 4.602 1.930 3.099 10021S
3-9/16 Z-2457 5.118 3.386 4.602 1.930 3.099 10021S
3-5/8 Z-2458 5.315 5.000 4.602 1.930 3.099 *
3-11/16 Z-2459 5.315 5.000 4.602 1.930 3.099 *
3-3/4 Z-2460 5.315 5.000 4.602 1.930 3.296 *
3-13/16 Z-2461 5.512 5.000 4.875 2.125 3.296 *
D2
3-7/8 Z-2462 5.512 5.000 4.875 2.125 3.296 *
3-15/16 Z-2463 5.512 5.000 4.875 2.125 3.296 *
4 Z-2464 5.709 5.000 4.875 2.125 3.296 *
4-1/16 Z-2465 5.709 5.000 4.875 2.125 3.296 *
4-1/8 Z-2466 5.906 5.000 4.875 2.126 3.296 *
4-3/16 Z-2467 5.906 5.000 5.343 2.440 3.296 *
4-1/4 Z-2468 5.906 5.000 5.343 2.440 3.690 *
4-5/16 Z-2469 6.102 5.000 5.343 2.440 3.690 *
4-3/8 Z-2470 6.102 5.000 5.343 2.440 3.690 *
4-7/16 Z-2471 6.102 5.000 5.343 2.440 3.690 *
4-1/2 Z-2472 6.299 5.000 5.343 2.440 3.690 *
4-5/8 Z-2474 6.496 5.000 5.577 2.640 4.084 *
4-3/4 Z-2476 6.693 5.000 5.655 2.640 4.084 *
4-7/8 Z-2478 6.693 5.000 5.655 2.640 4.084 *
5 Z-2480 7.087 5.000 5.850 2.830 4.281 *
5-1/8 Z-2482 7.087 5.000 6.162 2.990 4.674 *
5-3/16 Z-2483 7.087 5.000 6.162 2.990 4.674 *
5-1/4 Z-2484 7.480 5.000 6.162 2.980 4.574 *
5-3/8 Z-2486 7.480 5.000 6.162 2.990 4.674 *
* Requires retaining pin and ring, Pin = P24127, Ring = R24127
| 69 | 1.800.245.1148 www.onlineatp.com
1-1/2”
1-1/2”SQUARE
SQUAREDRIVE
DRIVE Deep Fractional Sizes
SIZE PART# D1 D2 L T C RET
SIX POINT IMPACT SOCKETS in in in in in in RING
1-5/16 Z-2421L 2.402 3.386 5.460 .748 3.887 10021S
1-3/8 Z-2422L 2.480 3.386 5.460 .748 3.887 10021S
1-7/16 Z-2423L 2.520 3.386 5.460 .748 3.887 10021S
1-1/2 Z-2424L 2.520 3.386 5.460 .866 3.887 10021S
1-9/16 Z-2425L 2.677 3.386 5.460 .866 3.887 10021S
1-5/8 Z-2426L 2.795 3.386 5.460 .866 3.887 10021S
1-11/16 Z-2427L 2.874 3.386 5.460 .984 3.887 10021S
1-3/4 Z-2428L 2.953 3.386 5.460 1.004 3.887 10021S
1-13/16 Z-2429L 2.953 3.386 5.460 1.004 3.887 10021S
1-7/8 Z-2430L 3.150 3.386 5.460 1.036 3.887 10021S
1-15/16 Z-2431L 3.150 3.386 5.460 1.063 3.887 10021S
2 Z-2432L 3.150 3.386 5.460 1.063 3.887 10021S
2-1/16 Z-2433L 3.386 3.386 5.460 1.181 3.887 10021S
2-1/8 Z-2434L 3.386 3.386 5.460 1.181 3.887 10021S
2-3/16 Z-2435L 3.386 3.386 5.460 1.260 3.887 10021S
2-1/4 Z-2436L 3.386 3.386 5.460 1.280 3.887 10021S
2-5/16 Z-2437L 3.622 3.386 5.460 1.300 3.887 10021S
2-3/8 Z-2438L 3.622 3.386 5.460 1.378 3.887 10021S
2-7/16 Z-2439L 3.780 3.386 5.460 1.378 3.887 10021S
2-1/2 Z-2440L 3.937 3.386 5.460 1.378 3.887 10021S
2-9/16 Z-2441L 3.937 3.386 5.460 1.378 3.887 10021S
2-5/8 Z-2442L 3.937 3.386 5.460 1.496 3.887 10021S
2-11/16 Z-2443L 4.134 3.386 5.460 1.496 3.887 10021S
2-3/4 Z-2444L 4.134 3.386 5.460 1.496 3.887 10021S
D1 2-13/16 Z-2445L 4.291 3.386 5.460 1.575 3.887 10021S
2-7/8 Z-2446L 4.291 3.386 5.460 1.614 3.887 10021S
2-15/16 Z-2447L 4.291 3.386 5.460 1.614 3.887 10021S
T 3 Z-2448L 4.528 3.386: 5.460 1.732 3.887 10021S
C 3-1/16 Z-2449L 4.528 3.386 5.460 1.732 3.887 10021S
3-1/8 Z-2450L 4.528 3.386 5.460 1.770 3.887 10021S
3-3/16 Z-2451L 4.764 3.386 5.460 1.850 3.887 10021S
L 3-1/4 Z-2452L 4.764 3.386 5.460 1.850 3.887 10021S
3-5/16 Z-2453L 4.764 3.386 5.460 1.850 3.887 10021S
3-3/8 Z-2454L 5.000 3.386 5.460 1.930 3.887 10021S
3-7/16 Z-2455L 5.000 3.386 5.460 1.930 3.887 10021S
3-1/2 Z-2456L 5.118 3.386 5.460 1.930 3.887 10021S
3-9/16 Z-2457L 5.118 3.386 5.460 1.930 3.887 10021S
3-5/8 Z-2458L 5.315 5.000 5.460 1.930 3.887 *
D2 3-11/16 Z-2459L 5.315 5.000 5.460 1.930 4.281 *
3-3/4 Z-2460L 5.315 5.000 5.850 1.930 4.281 *
3-13/16 Z-2461L 5.512 5.000 5.850 2.125 4.281 *
3-7/8 Z-2462L 5.512 5.000 5.850 2.125 4.281 *
3-15/16 Z-2463L 5.512 5.000 5.850 2.125 4.281 *
4 Z-2464L 5.709 5.000 5.850 2.125 4.281 *
4-1/16 Z-2465L 5.709 5.000 5.850 2.125 4.281 *
4-1/8 Z-2466L 5.906 5.000 5.850 2.126 4.281 *
4-3/16 Z-2467L 5.906 5.000 5.850 2.440 4.281 *
4-1/4 Z-2468L 5.906 5.000 6.240 2.440 4.674 *
4-5/16 Z-2469L 6.102 5.000 6.240 2.440 4.674 *
4-3/8 Z-2470L 6.102 5.000 6.240 2.440 4.674 *
4-7/16 Z-2471L 6.102 5.000 6.240 2.440 4.674 *
4-1/2 Z-2472L 6.299 5.000 6.240 2.440 4.674 *
4-5/8 Z-2474L 6.496 5.000 6.630 2.640 5.068 *
4-3/4 Z-2476L 6.693 5.000 6.630 2.640 5.068 *
4-7/8 Z-2478L 6.693 5.000 6.630 2.640 5.068 *
5 Z-2480L 7.087 5.000 7.020 2.830 5.462 *
5-1/8 Z-2482L 7.087 5.000 7.215 2.990 5.658 *
5-3/16 Z-2483L 7.087 5.000 7.215 2.990 5.658 *
5-3/8 Z-2486L 7.480 5.000 7.215 2.990 5.658 *
* Requires retaining pin and ring, Pin = P24127, Ring = R24127

1.800.245.1148 www.onlineatp.com | 70 |
1-1/2” SQUARE DRIVE SIX POINT IMPACT SOCKETS

Standard Metric Sizes Deep Metric Sizes

SIZE PART# D1 D2 L T C RET SIZE PART# D1 D2 L T C RET
mm mm mm mm mm mm RING mm mm mm mm mm mm RING
32 Z-24M32 60 86 75 16.5 34 10021S 32 Z-24M32L 60 86 140 16.5 99 10021S
33 Z-24M33 60 86 75 17 34 10021S 33 Z-24M33L 60 86 140 17 99 10021S
34 Z-24M34 60 86 75 17 34 10021S 34 Z-24M34L 60 86 140 17 99 10021S
35 Z-24M35 60 86 75 19 34 10021S 35 Z-24M35L 60 86 140 19 99 10021S
36 Z-24M36 64 86 80 19 39 10021S 36 Z-24M36L 64 86 140 19 99 10021S
37 Z-24M37 64 86 80 19 39 10021S 37 Z-24M37L 64 86 140 19 99 10021S
38 Z-24M38 64 86 80 22 39 10021S 38 Z-24M38L 64 86 140 22 99 10021S
39 Z-24M39 70 86 80 21.5 39 10021S 39 Z-24M39L 70 86 140 21.5 99 10021S
40 Z-24M40 70 86 80 21.5 39 10021S 40 Z-24M40L 70 86 140 21.5 99 10021S
41 Z-24M41 70 86 80 22 39 10021S 41 Z-24M41L 70 86 140 22 99 10021S
42 Z-24M42 70 86 80 21.5 39 10021S 42 Z-24M42L 70 86 140 21.5 99 10021S
43 Z-24M43 75 86 80 25 39 10021S 43 Z-24M43L 75 86 140 25 99 10021S
44 Z-24M44 75 86 80 21.5 39 10021S 44 Z-24M44L 75 86 140 21.5 99 10021S
45 Z-24M45 75 86 80 21.5 39 10021S 45 Z-24M45L 75 86 140 21.5 99 10021S
46 Z-24M46 75 86 80 25.5 39 10021S 46 Z-24M46L 75 86 140 25.5 99 10021S
47 Z-24M47 75 86 80 23.5 39 10021S 47 Z-24M47L 75 86 140 23.5 99 10021S
48 Z-24M48 80 86 82 23.5 41 10021S 48 Z-24M48L 80 86 140 23.5 99 10021S
49 Z-24M49 80 86 82 27 41 10021S 49 Z-24M49L 80 86 140 27 99 10021S
50 Z-24M50 80 86 82 23.5 41 10021S 50 Z-24M50L 80 86 140 23.5 99 10021S
51 Z-24M51 80 86 82 27 41 10021S 51 Z-24M51L 80 86 140 27 99 10021S
52 Z-24M52 80 86 82 27 41 10021S 52 Z-24M52L 80 86 140 27 99 10021S
54 Z-24M54 86 86 89 30 47 10021S 54 Z-24M54L 86 86 140 30 99 10021S
55 Z-24M55 86 86 89 27 47 10021S 55 Z-24M55L 86 86 140 27 99 10021S
56 Z-24M56 86 86 92 28 50 10021S 56 Z-24M56L 86 86 140 28 99 10021S
57 Z-24M57 86 86 92 32.5 50 10021S 57 Z-24M57L 86 86 140 32.5 99 10021S
58 Z-24M58 92 86 92 28 50 10021S 58 Z-24M58L 92 86 140 28 99 10021S
59 Z-24M59 92 86 92 33 50 10021S 59 Z-24M59L 92 86 140 33 99 10021S
60 Z-24M60 92 86 92 28 50 10021S 60 Z-24M60L 92 86 140 28 99 10021S
61 Z-24M61 96 86 96 28 54 10021S 61 Z-24M61L 96 86 140 28 99 10021S
62 Z-24M62 96 86 96 35 54 10021S 62 Z-24M62L 96 86 140 35 99 10021S
65 Z-24M65 100 86 96 35 54 10021S 65 Z-24M65L 100 86 140 35 99 10021S
67 Z-24M67 100 86 101 38 59 10021S 67 Z-24M67L 100 86 140 38 99 10021S
70 Z-24M70 105 86 101 38 59 10021S 70 Z-24M70L 105 86 140 38 99 10021S
73 Z-24M73 109 86 105 41 64 10021S 73 Z-24M73L 109 86 140 41 99 10021S
75 Z-24M75 109 86 105 41 64 10021S 75 Z-24M75L 109 86 140 41 99 10021S
76 Z-24M76 115 86 110 44 69 10021S 76 Z-24M76L 115 86 140 44 99 10021S
80 Z-24M80 115 86 110 37 69 10021S 80 Z-24M80L 115 86 140 37 99 10021S
85 Z-24M85 121 86 116 40 79 10021S 85 Z-24M85L 121 86 140 40 99 10021S
86 Z-24M86 127 86 116 49 79 10021S 86 Z-24M86L 127 86 140 49 99 10021S
90 Z-24M90 130 86 118 43 79 10021S 90 Z-24M90L 130 86 140 43 99 10021S
95 Z-24M95 135 127 118 49 84 * 95 Z-24M95L 135 127 150 49 109 *
100 Z-24M100 140 127 125 54 84 * 100 Z-24M100L 140 127 150 54 109 *
105 Z-24M105 150 127 125 54 84 * 105 Z-24M105L 150 127 150 54 109 *
110 Z-24M110 155 127 137 62 94 * 110 Z-24M110L 155 127 160 62 119 *
115 Z-24M115 160 127 137 57 94 * 115 Z-24M115L 160 127 160 57 119 *
120 Z-24M120 165 127 145 67 104 * 120 Z-24M120L 165 127 170 67 129 *
125 Z-24M125 170 127 145 67 104 * 125 Z-24M125L 170 127 170 67 129 *
130 Z-24M130 180 127 158 76 119 * 130 Z-24M130L 180 127 185 76 144 *
* Requires retaining pin and ring, Pin = P24127, Ring = R24127 * Requires retaining pin and ring, Pin = P24127, Ring = R24127

| 71 | 1.800.245.1148 www.onlineatp.com
1-1/2” SQUARE DRIVE 12 POINT IMPACT SOCKETS

Standard Socket Sizes Standard Socket Sizes Cont.

SIZE SIZE PART# D1 D2 L T Weight RET SIZE SIZE PART# D1 D2 L T Weight RET
in mm mm mm mm mm gr RING in mm mm mm mm mm gr RING
1-5/16 DH-2421 60 86 75 19 1800 10021S 3-14 DH-2452 121 86 116 47 5100 10021S
1-3/8 35 DH-2422M35 60 86 75 19 1800 10021S 3-5/16 DH-2453 121 86 116 47 5100 10021S
1-7/16 DH-2423 64 86 80 19 2200 10021S 3-3/8 86 DH-2454M86 127 86 116 49 5500 10021S
1-1/2 38 DH-2424M38 64 86 80 22 2200 10021S 3-7/16 DH-2455 127 86 118 49 5500 10021S
1-9/16 DH-2425 70 86 80 22 2200 10021S 3-1/2 DH-2456 130 86 118 49 5600 10021S
1-5/8 41 DH-2426M41 70 86 80 22 2200 10021S 3-9/16 DH-2457 130 86 118 49 5600 10021S
1-11/16 43 DH-2427M43 75 86 80 25 2200 10021S 3-5/8 DH-2458 135 127 118 49 7900 *
1-3/4 DH-2428 75 86 80 25.5 2200 10021S 3-11/16 DH-2459 135 127 118 49 7900 *
1-13/16 46 DH-2429M46 75 86 80 25.5 2200 10021S 3-3/4 95 DH-2460M95 135 127 118 49 7900 *
1-7/8 DH-2430 80 86 82 27 2300 10021S 3-13/16 DH-2461 140 127 125 54 8500 *
1-15/16 49 DH-2431M49 80 86 82 27 2300 10021S 3-7/8 DH-2462 140 127 125 54 8500 *
2 51 DH-2432M51 80 86 82 27 2300 10021S 3-15/16 100 DH-2463M100 140 127 125 54 8500 *
2-1/16 DH-2433 86 86 89 30 2500 10021S 4 DH-2464 145 127 125 54 9000 *
2-1/8 54 DH-2434M54 86 86 89 30 2500 10021S 4-1/16 DH-2465 145 127 125 54 9000 *
55 DH-24M55 86 86 89 30 2500 10021S 4-1/8 105 DH-2466M105 150 127 125 54 9500 *
2-3/16 DH-2435 86 86 92 32 2500 10021S 4-3/16 DH-2467 150 127 137 54 10200 *
2-1/4 57 DH-2436M57 86 86 92 32.5 2500 10021S 4-1/4 DH-2468 150 127 137 62 10200 *
2-5/16 59 DH-2437M59 92 86 92 33 2800 10021S 4-5/16 110 DH-2469M110 155 127 137 62 10400 *
2-3/8 DH-2438 92 86 96 35 2800 10021S 4-3/8 DH-2470 155 127 137 62 10400 *
2-7/16 62 DH-2439M62 96 86 96 35 3200 10021S 4-7/16 DH-2471 155 127 137 62 10400 *
2-1/2 DH-2440 100 86 96 35 3350 10021S 4-1/2 DH-2472 160 127 137 62 11500 *
2-9/16 65 DH-2441M65 100 86 96 35 3350 10021S 4-5/8 DH-2474 165 127 143 67 12000 *
2-5/8 67 DH-2442M67 100 86 101 38 3350 10021S 4-3/4 DH-2476 165 127 145 67 12000 *
2-3/4 70 DH-2444M70 105 86 101 38 3600 10021S 4-7/8 DH-2478 170 127 145 67 12200 *
2-7/8 73 DH-2446M73 105 86 101 44 3900 10021S 5 DH-2480 180 127 150 72 14800 *
2-15/16 75 DH-2447M75 105 86 101 44 3900 10021S 5-1/8 130 DH-2482M130 180 127 158 76 14800 *
2-13/16 DH-2445 105 86 105 44 3900 10021S 5-3/16 DH-2483 180 127 158 76 14800 *
3 76 DH-2448M76 115 86 110 44 4500 10021S 5-3/8 DH-2486 190 127 158 76 16700 *
3-1/8 DH-2450 115 86 110 44 4500 10021S
* Requires retaining pin and ring, Pin = P24127, Ring = R24127
3-3/16 DH-2451 121 86 116 47 5100 10021S

2-Part In-Hex Sizes

HEX HEX PART# D2 L T Weight RET REPLACEMENT
in mm mm mm mm gr RING TORX® BIT
1 Z-2416V 86 116 25 2600 10021S H16
1-1/8 Z-2418V 86 119 28 2600 10021S H18
1-1/4 Z-2420V 86 123 32 2800 10021S H20
T 1-3/8 Z-2422V 86 126 35 3400 10021S H22
1-1/2 Z-2424V 86 129 38 3400 10021S H24
1-5/8 Z-2426V 86 132 41 3520 10021S H26
L 1-3/4 Z-2428V 86 135 44 3520 10021S H28
1-13/16 Z-2429V 86 137 46 4700 10021S H29
1-7/8 Z-2430V 86 139 48 4900 10021S H30
2 Z-2432V 86 142 51 4900 10021S H32
2-1/8 Z-2434V 86 145 54 5100 10021S H34
22 Z-24M22V 86 113 22 2600 10021S HM22
D2
24 Z-24M24V 86 115 24 2600 10021S HM24
27 Z-24M27V 86 118 27 2600 10021S HM27
30 Z-24M30V 86 121 30 2800 10021S HM30
32 Z-24M32V 86 123 32 2800 10021S HM32
36 Z-24M36V 86 127 36 3400 10021S HM36
38 Z-24M38V 86 129 38 3400 10021S HM38
41 Z-24M41V 86 132 41 3520 10021S HM41
46 Z-24M46V 86 137 46 4700 10021S HM46
50 Z-24M50V 86 141 50 4900 10021S HM50
55 Z-24M55V 86 146 55 5100 10021S HM55

Note: 2 piece construction

1.800.245.1148 www.onlineatp.com | 72 |
1-1/2” SQUARE DRIVE ACCESSORIES

Universal
Joint
SIZE PART# RET
in RING
1-1/2 U2424 10020S

Adapters
PART# FEMALE MALE L RET
in in in RING L
A2416 1-1/2 1 3.75 10020S
A2440 1-1/2 2-1/2 3.50 10020S
A2495 1-1/2 #5 Spline 4.33 10020S

Double Ended
D2
Female Adapters
PART# D1 D2 L D RET RINGS
in in in in (D1) (D2)
AN2416 1-1/2 1 3.27 3.39 10020S 10008S L

AN2424 1-1/2 1-1/2 3.35 3.39 10020S 10020S

AN4024 2-1/2 1-1/2 4.53 5.00 10035S 10020S
D1
D

Double Ended
Male Extensions Extensions
PART# D L PART# D L RET
L
in in in in RING
Z2404 1.93 4 L E2406 3.385 6 10020S
Z2405 1.93 5 E2412 3.385 12 10020S
Z2410 1.93 10
Z2420 1.93 20

Retaining Pins and Rings

SQUARE SOCKET PIN# RING# d L D
DRIVE SIZES in in in D L
1-1/2 Up To 3-9/16” (90mm) P2486 R2486 .234 2.925 2.925
1-1/2 Above 3-9/16” (90mm) P24127 R24127 .234 4.525 4.525
d

| 73 | 1.800.245.1148 www.onlineatp.com
2-1/2” SQUARE DRIVE
SIX POINT IMPACT SOCKETS
Standard Fractional Sizes Standard Fractional Sizes Cont.
SIZE PART# D1 D2 L T C SIZE PART# D1 D2 L T C
in in in in in in in in in in in in
1-5/8 Z-4026 4.094 5.000 4.485 0.846 2.349 4-5/16 Z-4069 6.299 5.000 5.850 2.440 3.49
1-11/16 Z-4027 4.094 5.000 4.485 0.984 2.349 4-3/8 Z-4070 6.299 5.000 5.850 2.440 3.491
1-3/4 Z-4028 4.094 5.000 4.485 1.000 2.349 4-7/16 Z-4071 6.496 5.000 5.850 2.440 3.49
1-13/16 Z-4029 4.094 5.000 4.485 1.000 2.349 4-1/2 Z-4072 6.496 5.000 5.850 2.440 3.491
1-7/8 Z-4030 4.094 5.000 4.485 1.062 2.349 4-5/8 Z-4074 6.693 5.000 6.160 2.640 3.806
1-15/16 Z-4031 4.094 5.000 4.485 1.062 2.349 4-3/4 Z-4076 6.693 5.000 6.160 2.640 3.806
2 Z-4032 4.094 5.000 4.485 1.062 2.349 4-7/8 Z-4078 6.693 5.000 6.160 2.640 3.806
2-1/16 Z-4033 4.094 5.000 4.485 1.181 2.349 5 Z-4080 7.087 5.000 6.435 2.830 4.121
2-1/8 Z-4034 4.094 5.000 4.485 1.181 2.349 5-1/8 Z-4082 7.087 5.000 6.430 2.990 4.436
2-3/16 Z-4035 4.094 5.000 4.485 1.260 2.349 5-3/16 Z-4083 7.087 5.000 6.780 2.909 4.436
2-1/4 Z-4036 4.094 5.000 4.485 1.280 2.349 5-1/4 Z-4084 7.480 5.000 6.780 2.99 4.436
2-5/16 Z-4037 4.094 5.000 4.485 1.299 2.349 5-3/8 Z-4086 7.480 5.000 6.780 2.99 4.436
2-3/8 Z-4038 4.094 5.000 4.485 1.378 2.349 5-1/2 Z-4088 7.480 5.000 6.860 3.11 4.790
2-7/16 Z-4039 4.094 5.000 4.485 1.378 2.349 5-5/8 Z-4090 7.874 5.906 7.090 3.27 4.790
2-1/2 Z-4040 4.094 5.000 4.485 1.378 2.349 5-3/4 Z-4092 7.874 5.906 7.090 3.27 4.790
2-9/16 Z-4041 4.094 5.000 4.485 1.378 2.349 5-7/8 Z-4094 8.268 5.906 7.410 3.46 5.105
2-5/8 Z-4042 4.094 5.000 4.485 1.496 2.349 6 Z-4096 8.268 5.906 7.410 3.46 5.105
2-11/16 Z-4043 4.094 5.000 4.485 1.496 2.349 6-1/8 Z-4098 8.268 5.906 7.410 3.46 5.105
2-3/4 Z-4044 4.094 5.000 4.485 1.496 2.349 6-1/4 Z-40100 8.661 5.906 7.560 3.58 5.263
2-13/16 Z-4045 4.094 5.000 4.870 1.575 2.349 6-3/8 Z-40102 8.661 5.906 7.560 3.58 5.263
2-7/8 Z-4046 4.094 5.000 4.870 1.614 2.349 6-1/2 Z-40104 9.055 6.890 7.830 3.70 5.735
2-15/16 Z-4047 4.094 5.000 4.870 1.614 2.349 6-5/8 Z-40106 9.055 6.890 7.830 3.70 5.735
3 Z-4048 4.094 5.000 4.870 1.732 2.349 6-3/4 Z-40108 9.055 6.890 8.110 3.90 5.735
3-1/16 Z-4049 4.094 5.000 4.870 1.732 2.349 6-7/8 Z-40110 9.449 6.890 8.110 3.90 5.735
3-1/8 Z-4050 4.094 5.000 4.870 1.732 2.349 7 Z-40112 9.449 6.890 8.340 4.09 6.050
3-3/16 Z-4051 5.000 5.000 5.070 1.850 2.743 7-1/8 Z-40114 9.843 6.890 8.340 4.09 6.050
3-1/4 Z-4052 5.000 5.000 5.070 1.850 2.743 7-1/4 Z-40116 9.843 6.890 8.340 4.09 6.050
3-5/16 Z-4053 5.000 5.000 5.070 1.850 2.743 7-3/8 Z-40118 9.843 6.890 8.500 4.21 6.208
3-3/8 Z-4054 5.000 5.000 5.070 1.930 2.743 7-1/2 Z-40120 10.236 6.890 8.500 4.21 6.208
3-7/16 Z-4055 5.315 5.000 5.140 1.930 2.822 7-5/8 Z-40122 10.236 6.890 8.650 4.29 6.365
3-1/2 Z-4056 5.315 5.000 5.140 1.930 2.822 7-3/4 Z-40124 10.630 6.890 8.810 4.41 6.523
3-9/16 Z-4057 5.315 5.000 5.140 1.930 2.822 7-13/16 Z-40125 10.630 6.890 8.810 4.41 6.523
3-5/8 Z-4058 5.315 5.000 5.140 1.930 2.822 7-7/8 Z-40126 10.630 6.890 8.810 4.41 6.523
3-11/16 Z-4059 5.315 5.000 5.140 1.930 2.822 8 Z-40128 10.630 6.890 9.040 4.53 7.034
3-3/4 Z-4060 5.512 5.000 5.140 1.930 2.822 8-1/8 Z-40130 11.024 6.890 9.040 4.53 7.034
3-13/16 Z-4061 5.709 5.000 5.500 2.125 3.137 8-1/4 Z-40132 11.024 6.890 9.040 4.53 7.034
3-7/8 Z-4062 5.709 5.000 5.500 2.125 3.137 8-3/8 Z-40134 11.417 6.890 9.320 4.72 7.034
3-15/16 Z-4063 5.709 5.000 5.500 2.125 3.137 8-1/2 Z-40136 11.417 6.890 9.750 4.80 7.782
4 Z-4064 5.906 5.000 5.500 2.125 3.137 8-3/4 Z-40140 11.811 6.890 9.870 4.88 7.782
4-1/16 Z-4065 5.906 5.000 5.500 2.125 3.137 8-7/8 Z-40142 11.811 6.890 10.062 4.96 7.782
4-1/8 Z-4066 6.102 5.000 5.500 2.125 3.137 9 Z-40144 12.205 6.890 10.062 5.04 7.782
4-3/16 Z-4067 6.102 5.000 5.850 2.440 3.491 9-1/8 Z-40146 12.205 6.890 10.062 5.16 7.782
4-1/4 Z-4068 6.102 5.000 5.850 2.440 3.491 9-1/4 Z-40148 12.205 6.890 10.725 5.24 9.515

D1

T
C
L

D2
1.800.245.1148 www.onlineatp.com | 74 |
2-1/2” SQUARE DRIVE SIX POINT IMPACT SOCKETS

Deep Fractional Sizes Deep Fractional Sizes Cont.

SIZE PART# D1 D2 L T C SIZE PART# D1 D2 L T C
in in in in in in in in in in in in
1-5/8 Z-4026L 4.094 5.000 7.480 0.846 5.184 4-5/16 Z-4069L 6.299 5.000 8.070 2.44 5.775
1-11/16 Z-4027L 4.094 5.000 7.480 0.984 5.184 4-3/8 Z-4070L 6.299 5.000 8.070 2.44 5.775
1-3/4 Z-4028L 4.094 5.000 7.480 1.000 5.184 4-7/16 Z-4071L 6.496 5.000 8.070 2.44 5.775
1-13/16 Z-4029L 4.094 5.000 7.480 1.000 5.184 4-1/2 Z-4072L 6.496 5.000 8.070 2.44 5.775
1-7/8 Z-4030L 4.094 5.000 7.480 1.062 5.184 4-5/8 Z-4074L 6.693 5 000 8.380 2.64 6.090
1-15/16 Z-4031L 4.094 5.000 7.480 1.062 5.184 4-3/4 Z-4076L 6.693 5.000 8.380 2.64 6.090
2 Z-4032L 4.094 5.000 7.480 1.062 5.184 4-7/8 Z-4078L 6.693 5.000 8.380 2.64 6.090
2-1/16 Z-4033L 4.094 5.000 7.480 1.181 5.184 5 Z-4080L 7.087 5.000 8.700 2.83 6.405
2-1/8 Z-4034L 4.094 5.000 7.480 1.181 5.184 5-1/8 Z-4082L 7.087 5.000 9.000 2.99 6.719
2-3/16 Z-4035L 4.094 5.000 7.480 1.260 5.184 5-3/16 Z-4083L 7.087 5 000 9.000 2.99 6.719
2-1/4 Z-4036L 4.094 5.000 7.480 1.280 5.184 5-1/4 Z-4084L 7.480 5.000 9.000 2.99 6.719
2-5/16 Z-4037L 4.094 5.000 7.480 1.299 5.184 5-3/8 Z-4086L 7.480 5 000 9.000 2.99 6.719
2-3/8 Z-4038L 4.094 5.000 7.480 1.378 5.184 5-1/2 Z-4088L 7.480 5.000 9.120 3.110 7.074
2-7/16 Z-4039L 4.094 5.000 7.480 1.378 5.184 5-5/8 Z-4090L 7.874 5.906 9.360 3.270 7.074
2-1/2 Z-4040L 4.094 5.000 7.480 1.378 5.184 5-3/4 Z-4092L 7.874 5.906 9.360 3.270 7.074
2-9/16 Z-4041L 4.094 5.000 7.480 1.378 5.184 5-7/8 Z-4094L 8.268 5.906 9.670 3.460 7.389
2-5/8 Z-4042L 4.094 5.000 7.480 1.496 5.184 6 Z-4096L 8.268 5.906 9.670 3.460 7.389
2-11/16 Z-4043L 4.094 5.000 7.480 1.496 5.184 6-1/8 Z-4098L 8.268 5.906 9.670 3.460 7.389
2-3/4 Z-4044L 4.094 5.000 7.480 1.496 5.184 6-1/4 Z-40100L 8.661 5.906 9.820 3.580 7.546
2-13/16 Z-4045L 4.094 5.000 7.480 1.575 5.184 6-3/8 Z-40102L 8.661 5.906 9.820 3.580 7.546
2-7/8 Z-4046L 4.094 5.000 7.480 1.614 5.184 6-1/2 Z-40104L 9.055 6.890 10.140 3.700 8.019
2-15/16 Z-4047L 4.094 5.000 7.480 1.614 5.184 6-5/8 Z-40106L 9.055 6.890 10.140 3.700 8.019
3 Z-4048L 4.094 5.000 7.480 1.732 5.184 6-3/4 Z-40108L 9.055 6.890 10.300 3.900 8.019
3-1/16 Z-4049L 4.094 5.000 7.480 1.732 5.184 6-7/8 Z-40110L 9.449 6.890 10.300 3.900 8.019
3-1/8 Z-4050L 4.094 5.000 7.480 1.732 5.184 7 Z-40112L 9.449 6.890 10.600 4.090 8.334
3-3/16 Z-4051L 5.000 5.000 7.480 1.850 5.184 7-1/8 Z-40114L 9.843 6.890 10.600 4.090 8.334
3-1/4 Z-4052L 5.000 5.000 7.480 1.850 5.184 7-1/4 Z-40116L 9.843 6.890 10.600 4.090 8.334
3-5/16 Z-4053L 5.000 5.000 7.480 1.850 5.184 7-3/8 Z-40118L 9.843 6.890 10.760 4.210 8.491
3-3/8 Z-4054L 5.000 5.000 7.480 1.930 5.184 7-1/2 Z-40120L 10.236 6.890 10.760 4.210 8.491
3-7/16 Z-4055L 5.315 5.000 7.480 1.930 5.184 7-5/8 Z-40122L 10.236 6.890 10.920 4.290 8.649
3-1/2 Z-4056L 5.315 5.000 7.480 1.930 5.184 7-3/4 Z-40124L 10.630 6.890 10.070 4.410 8.806
3-9/16 Z-4057L 5.315 5.000 7.480 1.930 5.184 7-13/16 Z-40125L 10.630 6.890 10.070 4.410 8.806
3-5/8 Z-4058L 5.315 5.000 7.480 1.930 5.184 7-7/8 Z-40126L 10.630 6.890 10.070 4.410 8.806
3-11/16 Z-4059L 5.315 5.000 7.480 1.930 5.184 8 Z-40128L 10.630 6.890 11.310 4.530 9.318
3-3/4 Z-4060L 5.512 5.000 7.480 1.930 5.184 8-1/8 Z-40130L 11.024 6.890 11.310 4.530 9.318
3-13/16 Z-4061L 5.709 5.000 7.720 2.125 5.420 8-1/4 Z-40132L 11.024 6.890 11.310 4.530 9.318
3-7/8 Z-4062L 5.709 5.000 7.720 2.125 5.420 8-3/8 Z-40134L 11.417 6.890 11.580 4.720 9.318
3-15/16 Z-4063L 5.709 5.000 7.720 2.125 5.420 8-1/2 Z-40136L 11.417 6.890 12.320 4.800 10.066
4 Z-4064L 5.906 5.000 7.720 2.125 5.420 8-3/4 Z-40140L 11.811 6.890 12.320 4.880 10.066
4-1/16 Z-4065L 5.906 5.000 7.720 2.125 5 420 8-7/8 Z-40142L 11.811 6.890 12.320 4.960 10.066
4-1/8 Z-4066L 6.102 5.000 7.720 2.125 5.420 9 Z-40144L 12.205 6.890 12.320 5.040 10.066
4-3/16 Z-4067L 6.102 5.000 8.070 2.440 5.775 9-1/8 Z-40146L 12.205 6.890 12.320 5.160 10.066
4-1/4 Z-4068L 6.102 5.000 8.070 2.440 5.775 9-1/4 Z-40148L 12.205 6.890 12.980 5.240 11.798

D1

T
C

D2

| 75 | 1.800.245.1148 www.onlineatp.com
2-1/2” SQUARE DRIVE SIX POINT IMPACT SOCKETS

Standard Metric Sizes Deep Metric Sizes

SIZE PART# D1 D2 L T C SIZE PART# D1 D2 L T C
mm mm mm mm mm mm mm mm mm mm mm mm
41 Z-40M41 104 127 115 21.5 60 41 Z-40M41L 104 127 192 21.5 132
42 Z-40M42 104 127 115 21.5 60 42 Z-40M42L 104 127 192 21.5 132
43 Z-40M43 104 127 115 25 60 43 Z-40M43L 104 127 192 25 132
44 Z-40M44 104 127 115 21.5 60 44 Z-40M44L 104 127 192 21.5 132
45 Z-40M45 104 127 115 21.5 60 45 Z-40M45L 104 127 192 21.5 132
46 Z-40M46 104 127 115 25.5 60 46 Z-40M46L 104 127 192 25.5 132
47 Z-40M47 104 127 115 23.5 60 47 Z-40M47L 104 127 192 23.5 132
48 Z-40M48 104 127 115 23.5 60 48 Z-40M48L 104 127 192 23.5 132
49 Z-40M49 104 127 115 27 60 49 Z-40M49L 104 127 192 27 132
50 Z-40M50 104 127 115 23.5 60 50 Z-40M50L 104 127 192 23.5 132
51 Z-40M51 104 127 115 27 60 51 Z-40M51L 104 127 192 27 132
52 Z-40M52 104 127 115 27 60 52 Z-40M52L 104 127 192 27 132
54 Z-40M54 104 127 115 30 60 54 Z-40M54L 104 127 192 30 132
55 Z-40M55 104 127 115 27 60 55 Z-40M55L 104 127 192 27 132
56 Z-40M56 104 127 115 28 60 56 Z-40M56L 104 127 192 28 132
57 Z-40M57 104 127 115 32.5 60 57 Z-40M57L 104 127 192 32.5 132
58 Z-40M58 104 127 115 28 60 58 Z-40M58L 104 127 192 28 132
59 Z-40M59 104 127 115 33 60 59 Z-40M59L 104 127 192 33 132
60 Z-40M60 104 127 115 28 60 60 Z-40M60L 104 127 192 28 132
61 Z-40M61 104 127 115 28 60 61 Z-40M61L 104 127 192 28 132
62 Z-40M62 104 127 115 35 60 62 Z-40M62L 104 127 192 35 132
65 Z-40M65 104 127 115 35 60 65 Z-40M65L 104 127 192 35 132
67 Z-40M67 104 127 115 38 60 67 Z-40M67L 104 127 192 38 132
70 Z-40M70 104 127 115 38 60 70 Z-40M70L 104 127 192 38 132
73 Z-40M73 115 127 125 41 70 73 Z-40M73L 115 127 192 41 132
75 Z-40M75 115 127 125 41 70 75 Z-40M75L 115 127 192 41 132
76 Z-40M76 115 127 125 44 70 76 Z-40M76L 115 127 192 44 132
80 Z-40M80 115 127 125 37 70 80 Z-40M80L 115 127 192 37 132
85 Z-40M85 127 127 130 40 75 85 Z-40M85L 127 127 192 40 132
86 Z-40M86 127 127 130 49 75 86 Z-40M86L 127 127 192 49 132
90 Z-40M90 135 127 132 43 77 90 Z-40M90L 135 127 192 43 132
95 Z-40M95 140 127 132 49 77 95 Z-40M95L 140 127 192 49 132
100 Z-40M100 145 127 141 54 86 100 Z-40M100L 145 127 198 54 138
105 Z-40M105 150 127 141 54 86 105 Z-40M105L 150 127 198 54 138
110 Z-40M110 160 127 150 62 95 110 Z-40M110L 160 127 207 62 147
115 Z-40M115 165 127 158 57 103 115 Z-40M115L 165 127 207 57 147
120 Z-40M120 170 127 158 67 103 120 Z-40M120L 170 127 215 67 155
125 Z-40M125 170 127 158 67 103 125 Z-40M125L 170 127 215 67 155
130 Z-40M130 180 127 174 76 119 130 Z-40M130L 180 127 223 76 163
135 Z-40M135 190 127 174 76 119 135 Z-40M135L 190 127 231 76 151
140 Z-40M140 190 127 176 79 121 140 Z-40M140L 190 127 234 79 174
145 Z-40M145 200 150 182 83 127 145 Z-40M145L 200 150 240 83 180
150 Z-40M150 210 150 190 88 135 150 Z-40M150L 210 150 248 88 188
155 Z-40M155 210 150 190 88 135 155 Z-40M155L 210 150 248 88 188
160 Z-40M160 220 150 194 91 139 160 Z-40M160L 220 150 252 91 192
165 Z-40M165 230 175 201 94 146 165 Z-40M165L 230 175 260 94 200
170 Z-40M170 230 175 201 94 146 170 Z-40M170L 230 175 260 94 200
175 Z-40M175 240 175 208 99 153 175 Z-40M175L 240 175 264 99 204
180 Z-40M180 240 175 214 104 159 180 Z-40M180L 240 175 272 104 212
185 Z-40M185 250 175 214 104 159 185 Z-40M185L 250 175 272 104 212
190 Z-40M190 260 175 218 107 163 190 Z-40M190L 260 175 276 107 216
195 Z-40M195 260 175 222 109 167 195 Z-40M195L 260 175 280 109 220
200 Z-40M200 270 175 226 112 171 200 Z-40M200L 270 175 284 112 224
210 Z-40M210 280 175 232 115 177 210 Z-40M210L 280 175 290 115 230
215 Z-40M215 290 175 239 120 184 215 Z-40M215L 290 175 316 120 256
225 Z-40M225 300 175 258 126 203 225 Z-40M225L 300 175 316 126 256
235 Z-40M235 310 175 275 131 220 235 Z-40M235L 310 175 333 131 273

1.800.245.1148 www.onlineatp.com | 76 |
2-1/2” SQUARE DRIVE ACCESSORIES

No one offers a broader line of 2-1/2” drive sockets than OZAT for the heaviest bolting applications in
construction, plant maintenance, power generation, shipbuilding and refining.

OZAT sockets prove their value. The are guaranteed for hydraulic bolting jobs as well as for large impact
wrenches. OZAT has a socket to exactly match your application. If not available from our standard product
range, we’ll custom design one for you (see page 87).

Adapters
PART# FEMALE MALE L
L
in in in
A4024 2-1/2 1-1/2 5.380
A4056 2-1/2 3-1/2 5.538

Double Ended
D2
Female Adapters
PART# D1 D2 L D
in in in in
AN4024 2-1/2 1-1/2 4.53 5.00 L

AN4040 2-1/2 2-1/2 4.61 5.00

AN5640 3-1/2 2-1/2 6.34 6.89
D1
D

Double Ended D
Male Extensions
PART# D L Universal
in in Joint
Z4005 3.31 5 SIZE PART#
Z4006 3.31 6 in
Z4008 3.31 8 L 2-1/2 U4040
Z4010 3.31 10
Z4015 3.31 15
Z4020 3.31 20
Z4026 3.31 26

Retaining Pins and Rings

SQUARE SOCKET PIN# RING# d L D
DRIVE SIZES in in in D L
2-1/2 Up To 5-1/2” (140mm) P40127 R40127 .312 4.290 4.446
2-1/2 From 5-1/2” (140mm) To 6-3/8” (160mm) P40150 R40150 .312 5.187 5.309
2-1/2 Above 6-3/8” (160mm) P40175 R40175 .312 6.162 6.318
d

| 77 | 1.800.245.1148 www.onlineatp.com
3-1/2” SQUARE DRIVE SIX POINT IMPACT SOCKETS

Standard Fractional Sizes Deep Fractional Sizes

SIZE PART# D1 D2 L T C SIZE PART# D1 D2 L T C
in in in in in in in in in in in in
3-7/8 Z-5662 6.890 6.890 6.435 2.125 3.371 3-7/8 Z-5662L 6.890 6.890 10.800 2.125 7.781
3-15/16 Z-5663 6.890 6.890 6.435 2.125 3.725 3-15/16 Z-5663L 6.890 6.890 10.800 2.125 7.781
4 Z-5664 6.890 6.890 6.435 2.125 3.725 4 Z-5664L 6.890 6.890 10.800 2.125 7.781
4-1/16 Z-5665 6.890 6.890 6.435 2.125 3.725 4-1/16 Z-5665L 6.890 6.890 10.800 2.125 7.781
4-1/8 Z-5666 6.890 6.890 6.435 2.125 3.725 4-1/8 Z-5666L 6.890 6.890 10.800 2.125 7.781
4-3/16 Z-5667 6.890 6.890 6.786 2.440 3.725 4-3/16 Z-5667L 6.890 6.890 10.800 2.440 7.781
4-1/4 Z-5668 6.890 6.890 6.786 2.440 3.725 4-1/4 Z-5668L 6.890 6.890 10.800 2.440 7.781
4-5/16 Z-5669 6.890 6.890 6.786 2.440 4.040 4-5/16 Z-5669L 6.890 6.890 10.800 2.440 7.781
4-3/8 Z-5670 6.890 6.890 6.786 2.440 4.040 4-3/8 Z-5670L 6.890 6.890 10.800 2.440 7.781
4-7/16 Z-5671 6.890 6.890 6.786 2.440 4.040 4-7/16 Z-5671L 6.890 6.890 10.800 2.440 7.781
4-1/2 Z-5672 6.890 6.890 6.786 2.440 4.040 4-1/2 Z-5672L 6.890 6.890 10.800 2.440 7.781
4-5/8 Z-5674 6.890 6.890 7.100 2.640 4.040 4-5/8 Z-5674L 6.890 6.890 10.800 2.640 7.781
4-3/4 Z-5676 6.890 6.890 7.100 2.640 4.355 4-3/4 Z-5676L 6.890 6.890 10.800 2.640 7.781
4-7/8 Z-5678 6.890 6.890 7.100 2.640 4.355 4-7/8 Z-5678L 6.890 6.890 10.800 2.640 7.781
5 Z-5680 7.480 6.890 7.722 2.830 4.355 5 Z-5680L 7.480 6.890 10.800 2.830 7.781
5-1/8 Z-5682 7.480 6.890 7.722 3.000 4.355 5-1/8 Z-5682L 7.480 6.890 10.920 3.000 7.781
5-3/16 Z-5683 7.480 6.890 7.722 3.000 4.670 5-3/16 Z-5683L 7.480 6.890 10.920 3.000 7.899
5-1/4 Z-5684 7.480 6.890 7.722 3.000 4.670 5-1/4 Z-5684L 7.480 6.890 10.920 3.000 7.899
5-3/8 Z-5686 7.874 6.890 7.722 3.000 4.670 5-3/8 Z-5686L 7.874 6.890 10.920 3.000 7.899
5-1/2 Z-5688 7.874 6.890 8.000 3.110 5.300 5-1/2 Z-5688L 7.874 6.890 11.230 3.110 8.568
5-5/8 Z-5690 8.268 6.890 8.270 3.270 5.300 5-5/8 Z-5690L 8.268 6.890 11.500 3.270 8.568
5-3/4 Z-5692 8.268 6.890 8.270 3.270 5.300 5-3/4 Z-5692L 8.268 6.890 11.500 3.270 8.568
5-7/8 Z-5694 8.268 6.890 8.270 3.460 5.300 5-7/8 Z-5694L 8.268 6.890 11.500 3.460 8.568
6 Z-5696 8.661 6.890 8.350 3.460 5.300 6 Z-5696L 8.661 6.890 11.580 3.460 8.568
6-1/8 Z-5698 8.661 6.890 8.350 3.460 5.300 6-1/8 Z-5698L 8.661 6.890 11.580 3.460 8.568
6-1/4 Z-56100 9.055 6.890 8.500 3.580 5.458 6-1/4 Z-56100L 9.055 6.890 11.740 3.580 8.725
6-3/8 Z-56102 9.055 6.890 8.500 3.580 5.458 6-3/8 Z-56102L 9.055 6.890 11.740 3.580 8.725
6-1/2 Z-56104 9.055 6.890 8.970 3.700 5.930 6-1/2 Z-56104L 9.055 6.890 12.220 3.700 9.198
6-5/8 Z-56106 9.449 6.890 8.970 3.700 5.930 6-5/8 Z-56106L 9.449 6.890 12.220 3.700 9.198
6-3/4 Z-56108 9.449 6.890 8.970 3.900 5.930 6-3/4 Z-56108L 9.449 6.890 12.220 3.900 9.198
6-7/8 Z-56110 9.843 6.890 8.970 3.900 5.930 6-7/8 Z-56110L 9.843 6.890 12.220 3.900 9.198
7 Z-56112 9.843 6.890 9.250 4.090 6.206 7 Z-56112L 9.843 6.890 12.480 4.090 9.473
7-1/8 Z-56114 9.843 6.890 9.250 4.090 6 206 7-1/8 Z-56114L 9.843 6.890 12.480 4.090 9.473
7-1/4 Z-56116 10.236 6.890 9.250 4.090 6.206 7-1/4 Z-56116L 10.236 6.890 12.480 4.090 9.473
7-3/8 Z-56118 10.236 6.890 9.438 4.210 6.363 7-3/8 Z-56118L 10.236 6.890 12.630 4.210 9.631
7-1/2 Z-56120 10.630 6.890 9.438 4.210 6.363 7-1/2 Z-56120L 10.630 6.890 12.630 4.210 9.631
7-5/8 Z-56122 10.630 6.890 9.600 4.290 6.521 7-5/8 Z-56122L 10.630 6.890 12.800 4.290 9.788
7-3/4 Z-56124 10.630 6.890 9.710 4.410 6.678 7-3/4 Z-56124L 10.630 6.890 12.950 4.410 9.946
7-13/16 Z-56125 11.024 6.890 9.710 4.410 6.678 7-13/16 Z-56125L 11.024 6.890 12.950 4.410 9.946
7-7/8 Z-56126 11.024 6.890 9.710 4.410 6.678 7-7/8 Z-56126L 11.024 6.890 12.950 4.410 9.946
8 Z-56128 11.024 6.890 10.000 4.530 7.229 8 Z-56128L 11.024 6.890 13.220 4.530 10.497
8-1/8 Z-56130 11.417 6.890 10.000 4.530 7.229 8-1/8 Z-56130L 11.417 6.890 13.220 4.530 10.497
8-1/4 Z-56132 11.417 6.890 10.000 4.530 7.229 8-1/4 Z-56132L 11.417 6.890 13.220 4.530 10.497
8-3/8 Z-56134 11.417 6.890 10.250 4.720 7.229 8-3/8 Z-56134L 11.417 6.890 l 3.500 4.720 10.497
8-1/2 Z-56136 11.811 6.890 10.410 4.800 7.859 8-1/2 Z-56136L 11.811 6.890 13.650 4.800 11.127
8-3/4 Z-56140 12.205 6.890 10.530 4.880 7.859 8-3/4 Z-56140L 12.205 6.890 13.800 4.880 11.127
8-7/8 Z-56142 12.205 6.890 10.640 4.960 7.859 8-7/8 Z-56142L 12.205 6.890 13.920 4.960 11.127
9 Z-56144 12.205 6.890 10.760 5.040 7.859 9 Z-56144L 12.205 6.890 14.000 5.040 11.127
9-1/8 Z-56146 12.598 6.890 10.880 5.160 7.859 9-1/8 Z-56146L 12.598 6.890 14.110 5.160 11.127
9-1/4 Z-56148 12.598 6.890 11.110 5.240 9.198 9-1/4 Z-56148L 12.598 6.890 14.430 5.240 12.426
D1
D1
T
C
T
C
L
L

D2
D2

1.800.245.1148 www.onlineatp.com | 78 |
3-1/2” SQUARE DRIVE SIX POINT IMPACT SOCKETS

Standard Metric Sizes Deep Metric Sizes

SIZE PART# D1 D2 L T C SIZE PART# D1 D2 L T C
mm mm mm mm mm mm mm mm mm mm mm mm
100 Z-56M100 175 175 165 54 95 100 Z-56M100L 175 175 277 54 198
105 Z-56M105 175 175 165 54 94 105 Z-56M105L 175 175 277 54 198
110 Z-56M110 175 175 174 62 103 110 Z-56M110L 175 175 277 62 198
115 Z-56M115 175 175 174 57 103 115 Z-56M115L 175 175 277 57 198
120 Z-56M120 175 175 182 67 111 120 Z-56M120L 175 175 277 67 198
125 Z-56M125 175 175 182 67 111 125 Z-56M125L 175 175 277 67 198
130 Z-56M130 190 175 198 76 111 130 Z-56M130L 190 175 280 76 198
135 Z-56M135 190 175 198 76 119 135 Z-56M135L 190 175 280 76 201
140 Z-56M140 200 175 205 79 135 140 Z-56M140L 200 175 288 79 218
145 Z-56M145 210 175 212 83 135 145 Z-56M145L 210 175 295 83 218
150 Z-56M150 210 175 212 88 135 150 Z-56M150L 210 175 295 88 218
155 Z-56M155 220 175 214 88 135 155 Z-56M155L 220 175 297 88 218
160 Z-56M160 220 175 218 91 139 160 Z-56M160L 220 175 301 91 222
165 Z-56M165 230 175 230 94 151 165 Z-56M165L 230 175 313 94 234
170 Z-56M170 240 175 230 94 151 170 Z-56M170L 240 175 313 94 234
175 Z-56M175 250 175 230 99 151 175 Z-56M175L 250 175 313 99 234
180 Z-56M180 250 175 237 104 158 180 Z-56M180L 250 175 320 104 241
185 Z-56M185 260 175 237 104 158 185 Z-56M185L 260 175 320 104 241
190 Z-56M190 260 175 242 107 162 190 Z-56M190L 260 175 324 107 245
195 Z-56M195 270 175 246 109 166 195 Z-56M195L 270 175 328 109 249
200 Z-56M200 280 175 249 112 170 200 Z-56M200L 280 175 332 112 253
210 Z-56M210 290 175 256 115 184 210 Z-56M210L 290 175 339 115 267
215 Z-56M215 300 175 263 120 220 215 Z-56M215L 300 175 346 120 283
225 Z-56M225 310 175 273 126 200 225 Z-56M225L 310 175 357 126 283
230 Z-56M230 310 175 276 128 200 230 Z-56M230L 310 175 359 128 283
235 Z-56M235 320 175 279 131 200 235 Z-56M235L 320 175 362 131 283

ACCESSORIES
Double Ended D2
Adapters Female Adapters
PART# FEMALE MALE L PART# D1 D2 L D
L
in in in in in in in L
A5640 3-1/2 2-1/2 7.137 AN5640 3-1/2 2-1/2 6.34 6.89
AN5656 3-1/2 3-1/2 6.57 6.89
D1
D

Double Ended
Male Extensions Retaining Pins and Rings
PART# D L SQUARE SOCKET PIN# RING# d L D
in in DRIVE SIZES in in in
Z5610 4.685 10 L 3-1/2 All Sizes P56175 R56175 0.39 6.24 6.24
Z5620 4.685 20
Z5640 4.685 40

D L

| 79 | 1.800.245.1148 www.onlineatp.com
#5 SPLINE DRIVE SIX POINT IMPACT SOCKETS

Standard Fractional Sizes Deep Fractional Sizes

SIZE PART# D1 D2 L T C SIZE PART# D1 D2 L T C
in in in in in in in in in in in in
3/4 Z-9512 1.890 2.362 2.730 .374 1.006 3/4 Z-9512L 1.890 2.362 6.240 .374 4.549
13/16 Z-9513 1.890 2.362 2.730 .435 1.006 13/16 Z-9513L 1.890 2.362 6.240 .435 4.549
7/8 Z-9514 1.890 2.362 2.730 .512 1.006 7/8 Z-9514L 1.890 2.362 6.240 .512 4.549
15/16 Z-9515 1.890 2.362 2.730 .512 1.006 15/16 Z-9515L 1.890 2.362 6.240 .512 4.549
1 Z-9516 1.929 2.362 2.730 .512 1.006 1 Z-9516L 1.929 2.362 6.240 .512 4.549
1-1/16 Z-9517 2.008 2.362 2.730 .512 1.006 1-1/16 Z-9517L 2.008 2.362 6.240 .512 4.549
1-1/8 Z-9518 2.008 2.362 2.730 .650 1.006 1-1/8 Z-9518L 2.008 2.362 6.240 .650 4.549
1-3/16 Z-9519 2.126 2.362 2.730 .650 1.006 1-3/16 Z-9519L 2.126 2.362 6.240 .650 4.549
1-1/4 Z-9520 2.362 2.362 2.925 .669 1.203 1-1/4 Z-9520L 2.362 2.362 6.240 .669 4.549
1-5/16 Z-9521 2.362 2.362 3.000 .748 1.281 1-5/16 Z-9521L 2.362 2.362 6.240 .748 4.549
1-3/8 Z-9522 2.362 2.362 3.000 .748 1.281 1-3/8 Z-9522L 2.362 2.362 6.240 .748 4.549
1-7/16 Z-9523 2.480 2.362 3.000 .748 1.281 1-7/16 Z-9523L 2.480 2.362 6.240 .748 4.549
1-1/2 Z-9524 2.480 2.362 3.125 .866 1.400 1-1/2 Z-9524L 2.480 2.362 6.240 .866 4.549
1-9/16 Z-9525 2.638 2.362 3.125 .866 1.400 1-9/16 Z-9525L 2.638 2.362 6.240 .866 4.549
1-5/8 Z-9526 2.638 2.362 3.125 .866 1.400 1-5/8 Z-9526L 2.638 2.362 6.240 .866 4.549
1-11/16 Z-9527 2.638 2.362 3.275 .984 1.557 1-11/16 Z-9527L 2.638 2.362 6.240 .984 4.549
1-3/4 Z-9528 2.874 2.362 3.275 1.000 1.557 1-3/4 Z-9528L 2.874 2.362 6.240 1.000 4.549
1-13/16 Z-9529 2.874 2.362 3.275 1.000 1.577 1-13/16 Z-9529L 2.874 2.362 6.240 1.000 4.549
1-7/8 Z-9530 2.874 2.362 3.432 1.063 1.715 1-7/8 Z-9530L 2.874 2.362 6.240 1.063 4.549
1-15/16 Z-9531 2.874 2.362 3.432 1.063 1.715 1-15/16 Z-9531L 2.874 2.362 6.240 1.063 4.549
2 Z-9532 3.228 2.362 3.432 1.063 1.715 2 Z-9532L 3.228 2.362 6.240 1.063 4.549
2-1/16 Z-9533 3.228 3.386 3.625 1.181 1.911 2-1/16 Z-9533L 3.228 3.386 6.240 1.181 4.549
2-1/8 Z-9534 3.228 3.386 3.625 1.181 1.911 2-1/8 Z-9534L 3.228 3.386 6.240 1.181 4.549
2-3/16 Z-9535 3.228 3.386 3.740 1.260 2.030 2-3/16 Z-9535L 3.228 3.386 6.240 1.260 4.549
2-1/4 Z-9536 3.465 3.386 3.740 1.299 2.030 2-1/4 Z-9536L 3.465 3.386 6.240 1.299 4.549
2-5/16 Z-9537 3.465 3.386 3.740 1.299 2.030 2-5/16 Z-9537L 3.465 3.386 6.240 1.299 4.549
2-3/8 Z-9538 3.465 3.386 3.822 1.378 2.108 2-3/8 Z-9538L 3.465 3.386 6.240 1.373 4.549
2-7/16 Z-9539 3.465 3.386 3.900 1.378 2.108 2-7/16 Z-9539L 3.465 3.386 6.240 1.378 4.549
2-1/2 Z-9540 3.937 3.386 3.900 1.378 2.108 2-1/2 Z-9540L 3.937 3.386 6.240 1.378 4.549
2-9/16 Z-9541 3.937 3.386 3.900 1.378 2.108 2-9/16 Z-9541L 3.937 3.386 6.240 1.378 4.549
2-5/8 Z-9542 3.937 3.386 3.978 1.496 2.266 2-5/8 Z-9542L 3.937 3.386 6.240 1.496 4.549
2-11/16 Z-9543 3.937 3.386 3.978 1.496 2.266 2-11/16 Z-9543L 3.937 3.386 6.240 1.496 4.549
2-3/4 Z-9544 3.937 3.386 3.978 1.496 2 266 2-3/4 Z-9544L 3.937 3.386 6.240 1.496 4.549
2-13/16 Z-9545 4.134 3.386 4.210 1.575 2.502 2-13/16 Z-9545L 4.134 3.386 6.240 1.575 4.549
2-7/8 Z-9546 4.134 3.386 4.210 1.614 2.502 2-7/8 Z-9546L 4.134 3.386 6.240 1.614 4.549
2-15/16 Z-9547 4.134 3.386 4.210 1.614 2.502 2-15/16 Z-9547L 4.134 3.386 6.240 1.614 4.549
3 Z-9548 4.291 3.386 4.446 1.732 2.738 3 Z-9548L 4.291 3.386 6.240 1.732 4.628
3-1/16 Z-9549 4.291 3.386 4.446 1.732 2.738 3-1/16 Z-9549L 4.291 3.386 6.310 1.732 4.628
3-1/8 Z-9550 4.291 3.386 4.446 1.732 2.738 3-1/8 Z-9550L 4 291 3 386 6.310 1 732 4.628
3-1/4 Z-9552 5.062 3.386 4.909 2.106 2.781
3-5/16 Z-9553 5.062 3.386 4.909 2.106 2.781
3-3/8 Z-9554 5.062 3.386 4.909 2.106 2.781
3-1/2 Z-9556 5.129 3.386 4.909 2.106 2.781
3-5/8 Z-9558 5.256 3.386 4.909 2.106 2.781
3-3/4 Z-9560 5.309 3.386 4.909 2.106 2.781
3-7/8 Z-9562 5.442 3.386 4.909 2.106 2.781
4 Z-9564 5.511 3.386 4.909 2.106 2.781

D1

T
C
L

D2
1.800.245.1148 www.onlineatp.com | 80 |
#5 SPLINE DRIVE SIX POINT IMPACT SOCKETS
Standard Metric Sizes Deep Metric Sizes
SIZE PART# D1 D2 L T C SIZE PART# D1 D2 L T C
mm mm mm mm mm mm mm mm mm mm mm mm
19 Z-95M19 48 60 70 .374 26 19 Z-95M19L 48 60 160 .374 116
20 Z-95M20 48 60 70 .394 26 20 Z-95M20L 48 60 160 .394 116
21 Z-95M21 48 60 70 .394 26 21 Z-95M21L 48 60 160 .394 116
22 Z-95M22 48 60 70 .394 26 22 Z-95M22L 48 60 160 .394 116
23 Z-95M23 48 60 70 .472 26 23 Z-95M23L 48 60 160 .472 116
24 Z-95M24 49 60 70 .472 26 24 Z-95M24L 49 60 160 .472 116
25 Z-95M25 49 60 70 .512 26 25 Z-95M25L 49 60 160 .512 116
26 Z-95M26 51 60 70 .512 26 26 Z-95M26L 51 60 160 .512 116
27 Z-95M27 51 60 70 .512 26 27 Z-95M27L 51 60 160 .512 116
28 Z-95M28 51 60 70 .551 26 28 Z-95M28L 51 60 160 .551 116
29 Z-95M29 54 60 70 .551 26 29 Z-95M29L 54 60 160 .551 116
30 Z-95M30 54 60 70 .650 26 30 Z-95M30L 54 60 160 .650 116
31 Z-95M31 60 60 75 .650 31 31 Z-95M31L 60 60 160 .650 116
32 Z-95M32 60 60 75 .650 31 32 Z-95M32L 60 60 160 .650 116
33 Z-95M33 60 60 75 .669 31 33 Z-95M33L 60 60 160 .669 116
34 Z-95M34 60 60 77 .669 33 34 Z-95M34L 60 60 160 .669 116
35 Z-95M35 60 60 77 .748 33 35 Z-95M35L 60 60 160 .748 116
36 Z-95M36 63 60 77 .748 33 36 Z-95M36L 63 60 160 .748 116
37 Z-95M37 63 60 77 .748 33 37 Z-95M37L 63 60 160 .748 116
38 Z-95M38 63 60 80 .866 36 38 Z-95M38L 63 60 160 .866 116
39 Z-95M39 67 60 80 .866 36 39 Z-95M39L 67 60 160 .866 116
40 Z-95M40 67 60 80 .866 36 40 Z-95M40L 67 60 160 .866 116
41 Z-95M41 67 60 80 .866 36 41 Z-95M41L 67 60 160 .866 116
42 Z-95M42 67 60 80 .846 36 42 Z-95M42L 67 60 160 .846 116
43 Z-95M43 67 60 84 .984 40 43 Z-95M43L 67 60 160 .984 116
44 Z-95M44 73 60 84 .846 40 44 Z-95M44L 73 60 160 .846 116
45 Z-95M45 73 60 84 .846 40 45 Z-95M45L 73 60 160 .846 116
46 Z-95M46 73 60 84 1.004 40 46 Z-95M46L 73 60 160 1.004 116
47 Z-95M47 73 60 84 .925 40 47 Z-95M47L 73 60 160 .925 116
48 Z-95M48 73 60 88 .925 44 48 Z-95M48L 73 60 160 .925 116
49 Z-95M49 73 60 88 1.063 44 49 Z-95M49L 73 60 160 1.063 116
50 Z-95M50 82 60 88 .925 44 50 Z-95M50L 82 60 160 .925 116
51 Z-95M51 82 60 88 1.063 44 51 Z-95M51L 82 60 160 1.063 116
52 Z-95M52 82 60 88 1.063 44 52 Z-95M52L 82 60 160 1.063 116
54 Z-95M54 82 60 93 1.181 49 54 Z-95M54L 82 60 160 1.181 116
55 Z-95M55 82 60 93 1.063 49 55 Z-95M55L 82 60 160 1.063 116
56 Z-95M56 88 86 96 1.102 52 56 Z-95M56L 88 86 160 1.102 116
57 Z-95M57 88 76 96 1.299 52 57 Z-95M57L 88 76 160 1.299 116
58 Z-95M58 88 86 96 1.102 52 58 Z-95M58L 88 86 160 1.102 116
59 Z-95M59 88 86 96 1.299 52 59 Z-95M59L 88 86 160 1.299 116
60 Z-95M60 88 86 96 1.102 52 60 Z-95M60L 88 86 160 1.102 116
61 Z-95M61 88 86 98 1.102 54 61 Z-95M61L 88 86 160 1.102 116
62 Z-95M62 88 86 100 1.378 56 62 Z-95M62L 88 86 160 1.378 116
65 Z-95M65 100 86 100 1.378 56 65 Z-95M65L 100 86 160 1.378 116
67 Z-95M67 100 86 102 1.496 58 67 Z-95M67L 100 86 160 1.496 116
70 Z-95M70 100 86 102 1.496 58 70 Z-95M70L 100 86 160 1.496 116
73 Z-95M73 105 86 108 1.614 64 73 Z-95M73L 105 86 160 1 614 116
75 Z-95M75 105 86 108 1.614 64 75 Z-95M75L 105 86 162 1.614 116
76 Z-95M76 109 86 114 1.732 70 76 Z-95M76L 109 86 162 1.732 118
80 Z-95M80 115 86 114 1.457 70 80 Z-95M80L 115 86 162 1.457 118

Budd Wheel Socket Sizes

SIZE PART# D1 D2 L T

13/16 X 1-1/2 Z-9524BS 2.48 2.36 4.133 .571
13/16 Z-9513B 2.008 2.36 2.756 .472

| 81 | 1.800.245.1148 www.onlineatp.com
#4
#4 SPLINE
SPLINE DRIVE
DRIVE IMPACT SOCKETS

#4 Standard Length
Fractional and Metric Sizes
D1
SIZE SIZE PART# D1 D2 L T
in mm mm mm mm mm
1-1/16 27 Z-9417M27 46 52 59 13
T
1-1/8 Z-9418 48 52 65 16.5
1 3/16 30 Z-9419M30 50 52 65 16.5
L
1-1/4 Z-9420 52 52 65 17
1-5/16 Z-9421 52 52 68 19
1 3/8 35 Z-9422M35 52 52 68 19
1-7/16 Z-9423 52 52 68 19
D2 1-1/2 38 Z-9424M38 52 52 73 22
1-9/16 Z-9425 57 52 73 22
1-5/8 41 Z-9426M41 57 52 73 22
1-11/16 Z-9427 57 52 73 22
1-3/4 Z-9428 63 52 78 25.5
1-13/16 Z-9429 67 52 78 25.5
Universal 1-7/8 Z-9430 67 52 78 27
Joint 1-15/16 Z-9431 70 52 81 27
SIZE PART# 2 Z-9432 73 52 81 27
2-1/16 Z-9433 73 52 85 30
#4 Spline Drive U9494 2-1/8 Z-9434 78 52 88 32
2-3/16 Z-9435 78 52 88 23
2-1/4 Z-9436 78 52 88 23

ACCESSORIES FOR #5 SPLINE DRIVE

Adapters Extensions
PART# FEMALE MALE L PART# L
L
in in in in
A9516 #5 1” 3.54 E9508 8
A9524 #5 1-1/2” 3.94 E9515 15
A2495 1-1/2” #5 5.43

Universal Universal Joint Repair Kits

Joint PART# DESCRIPTION
SIZE PART#
95UK1 Retainer Kit Contents: Hex Plunger, Lock Button, Inner & Outer Springs
#5 Spline Drive U9595 95UK2 Pin Kit Contents: Drive Pin, Trunnions, Spiral Pins
95UK3 Retrofit Kit Contents: All Parts From the Above 2 Kits

Retaining Pins and Rings

SPLINE SOCKET PIN# RING# d L D
DRIVE SIZES in in in D L
#5 Up To 2-3/16” (55mm) P9560 R9560 .950 1.950 1.950
#5 Above 2-3/16” (55mm) P9586 R9586 .950 2.964 2.964
d

1.800.245.1148 www.onlineatp.com | 82 |
 FLAT STRIKING WRENCHES
12 POINT OPENING
Fractional Sizes Fractional Sizes Cont.
PART# SIZE D C L PART# SIZE D C L
in in in in in in in in
FSW14 7/8 1-13/16 9/16 6-1/2 FSW69 4-5/16 6-11/16 1-7/8 17-11/16
FSW15 15/16 1-13/16 9/16 6-1/2 FSW70 4-3/8 6-11/16 1-7/8 17-11/16
FSW16 1 1-13/16 9/16 6-1/2 FSW71 4-7/16 6-11/16 1-7/8 17-11/16
FSW17 1-1/16 1-13/16 5/8 7-1/16 FSW72 4-1/2 6-11/16 1-7/8 17-11/16
FSW18 1-1/8 1-13/16 5/8 7-1/16 FSW74 4-5/8 6-11/16 1-7/8 17-11/16
FSW19 1-3/16 2-1/16 11/16 7-1/2 FSW76 4-3/4 7-3/16 2-1/8 18-7/8
FSW20 1-1/4 2-1/16 11/16 7-1/2 FSW78 4-7/8 7-3/16 2-1/8 18-7/8
FSW21 1-5/16 2-1/16 11/16 7-1/2 FSW80 5 7-3/16 2-1/8 18-7/8
FSW22 1-3/8 2-1/16 11/16 7-1/2 FSW82 5-1/8 7-15/16 2-5/16 20-1/2
FSW23 1-7/16 2-15/16 11/16 8-1/16 FSW83 5-3/16 7-15/16 2-5/16 20-1/2
FSW24 1-1/2 2-15/16 11/16 8-1/16 FSW84 5-1/4 7-15/16 2-5/16 20-1/2
FSW25 1-9/16 2-15/16 11/16 8-1/16 FSW86 5-3/8 7-15/16 2-5/16 20-1/2
FSW26 1-5/8 2-15/16 13/16 9-1/16 FSW88 5-1/2 8-1/4 2-5/16 20-1/2
FSW27 1-11/16 2-15/16 13/16 9-1/16 FSW90 5-5/8 8-1/4 2-5/16 20-1/2
FSW28 1-3/4 2-15/16 13/16 9-1/16 FSW92 5-3/4 9 2-1/2 22-13/16
FSW29 1-13/16 2-15/16 7/8 9-7/16 FSW94 5-7/8 9 2-1/2 22-13/16
FSW30 1-7/8 2-15/16 7/8 9-7/16 FSW96 6 9 2-1/2 22-13/16
FSW31 1-15/16 2-15/16 7/8 9-7/16 FSW98 6-1/8 9 2-1/2 22-13/16
FSW32 2 3-1/8 15/16 10-1/16 FSW100 6-1/4 9 2-1/2 22-13/16
FSW33 2-1/16 3-1/8 15/16 10-1/16 FSW102 6-3/8 9-7/16 2-1/2 22-13/16
FSW34 2-1/8 3-1/8 15/16 10-1/16 FSW104 6-1/2 10-7/16 2-3/4 25-9/16
FSW35 2-3/16 3-3/8 1 10-5/8 FSW106 6-5/8 10-7/16 2-3/4 25-9/16
FSW36 2-1/4 3-3/8 1 10-5/8 FSW108 6-3/4 10-7/16 2-3/4 25-9/16
FSW37 2-5/16 3-3/8 1 10-5/8 FSW110 6-7/8 10-7/16 2-3/4 25-9/16
FSW38 2-3/8 3-11/16 1 11 FSW112 7 10-7/16 2-3/4 25-9/16
FSW39 2-7/16 3-11/16 1 11 FSW114 7-1/8 10-7/16 2-3/4 25-9/16
FSW40 2-1/2 3-11/16 1 11 FSW116 7-1/4 11-7/16 2-15/16 27-9/16
FSW41 2-9/16 4 1-3/16 11-13/16 FSW118 7-3/8 11-7/16 2-15/16 27-9/16
FSW42 2-5/8 4 1-3/16 11-13/16 FSW120 7-1/2 11-7/16 2-15/16 27-9/16
FSW43 2-11/16 4 1-3/16 11-13/16 FSW122 7-5/8 11-7/16 2-15/16 27-9/16
FSW44 2-3/4 4-5/16 1-5/16 13 FSW124 7-3/4 11-7/16 2-15/16 27-9/16
FSW45 2-13/16 4-5/16 1-5/16 13 FSW125 7-13/16 11-7/16 2-15/16 27-9/16
FSW46 2-7/8 4-5/16 1-5/16 13 FSW126 7-7/8 11-7/16 2-15/16 27-9/16
FSW47 2-15/16 4-5/16 1-5/16 13 FSW128 8 11-7/16 2-15/16 27-9/16
FSW48 3 4-5/16 1-5/16 13 FSW130 8-1/8 11-7/16 2-15/16 27-9/16
FSW49 3-1/16 4-5/16 1-5/16 13 FSW132 8-1/4 12-5/8 3-1/8 29-1/2
FSW50 3-1/8 4-15/16 1-7/16 14-3/16 FSW134 8-3/8 12-5/8 3-1/8 29-1/2
FSW51 3-3/16 4-15/16 1-7/16 14-3/16 FSW136 8-1/2 12-5/8 3-1/8 29-1/2
FSW52 3-1/4 4-15/16 1-7/16 14-3/16 FSW140 8-5/8 12-5/8 3-1/8 29-1/2
FSW53 3-5/16 4-15/16 1-7/16 14-3/16 FSW142 8-7/8 12-5/8 3-1/8 29-1/2
FSW54 3-3/8 4-15/16 1-7/16 14-3/16 FSW144 9 12-5/8 3-1/8 29-1/2
FSW55 3-7/16 4-15/16 1-7/16 14-3/16
FSW56 3-1/2 4-15/16 1-7/16 14-3/16 D
FSW57 3-9/16 5-9/16 1-9/16 15-3/8
FSW58 3-5/8 5-9/16 1-9/16 15-3/8
FSW59 3-11/16 5-9/16 1-9/16 15-3/8
FSW60 3-3/4 5-9/16 1-9/16 15-3/8
FSW61 3-13/16 5-9/16 1-9/16 15-3/8
FSW62 3-7/8 5-9/16 1-9/16 15-3/8
FSW63 3-15/16 6-1/8 1-3/4 16-9/16
FSW64 4 6-1/8 1-3/4 16-9/16 L
FSW65 4-1/16 6-1/8 1-3/4 16-9/16
FSW66 4-1/8 6-1/8 1-3/4 16-9/16
FSW67 4-3/16 6-1/8 1-3/4 16-9/16
FSW68 4-1/4 6-1/8 1-3/4 16-9/16 C

SIZE

| 83 | 1.800.245.1148 www.onlineatp.com
12 POINT OPENING FLAT STRIKING WRENCHES

Metric Sizes Metric Sizes Cont.

PART# SIZE D C L PART# SIZE D C L
mm mm mm mm mm mm mm mm
FSWM22 22 43 15 165 FSWM61 61 93 26 280
FSWM23 23 43 15 165 FSWM62 62 93 26 280
FSWM24 24 43 15 165 FSWM65 65 102 30 300
FSWM25 25 43 15 165 FSWM67 67 102 30 300
FSWM26 26 43 15 165 FSWM70 70 110 33 330
FSWM27 27 46 16 180 FSWM73 73 110 33 330
FSWM28 28 46 16 180 FSWM75 75 110 33 330
FSWM29 29 46 16 180 FSWM76 76 110 33 330
FSWM30 30 52 17 190 FSWM80 80 125 36 360
FSWM31 31 52 17 190 FSWM85 85 125 36 360
FSWM32 32 52 17 190 FSWM86 86 125 36 360
FSWM33 33 52 17 190 FSWM90 90 142 40 390
FSWM34 34 52 17 190 FSWM95 95 142 40 390
FSWM35 35 52 17 190 FSWM100 100 115 45 420
FSWM36 36 58 18 205 FSWM105 105 155 45 420
FSWM37 37 58 18 205 FSWM110 110 170 48 450
FSWM38 38 58 18 205 FSWM115 115 170 48 450
FSWM39 39 58 18 205 FSWM120 120 182 54 480
FSWM40 40 58 18 205 FSWM125 125 182 54 480
FSWM41 41 66 20 230 FSWM130 130 202 58 520
FSWM42 42 66 20 230 FSWM135 135 202 58 520
FSWM43 43 66 20 230 FSWM140 140 210 58 520
FSWM44 44 66 20 230 FSWM145 145 228 64 580
FSWM45 45 66 20 230 FSWM150 150 228 64 580
FSWM46 46 74 22 240 FSWM155 155 228 64 580
FSWM47 47 74 22 240 FSWM160 160 240 64 580
FSWM48 48 74 22 240 FSWM165 165 265 70 650
FSWM49 49 74 22 240 FSWM170 170 265 70 650
FSWM50 50 80 24 255 FSWM175 175 265 70 650
FSWM51 51 80 24 255 FSWM180 180 265 70 650
FSWM52 52 80 24 255 FSWM185 185 290 75 700
FSWM54 54 80 24 255 FSWM190 190 290 75 700
FSWM55 55 86 25 270 FSWM195 195 290 75 700
FSWM56 56 86 25 270 FSWM200 200 290 75 700
FSWM57 57 86 25 270 FSWM210 210 320 80 750
FSWM58 58 86 25 270 FSWM215 215 320 80 750
FSWM59 59 86 25 270 FSWM225 225 320 80 750
FSWM60 60 93 26 280 FSWM230 230 320 80 750

1.800.245.1148 www.onlineatp.com | 84 |
12 POINT OPENING
OFFSET STRIKING WRENCHES
FRACTIONAL SIZES

Part# Size D C L
SW16 1 2-3/64 53/64 11-31/32
SW17 1-1/16 2-3/64 53/64 11-31/32
SW18 1-1/8 2-3/64 53/64 11-31/32
SW20 1-1/4 2-3/64 53/64 11-31/32
SW21 1-5/16 2-3/64 53/64 11-31/32
SW23 1-7/16 2-23/64 1-1/16 12-23/64
SW24 1-1/2 2-19/32 1-1/16 12-23/64
SW26 1-5/8 2-19/32 1-1/16 12-23/64
SW27 1-11/16 2-19/32 1-1/16 12-23/64
SW28 1-3/4 2-19/32 1-1/16 12-23/64
SW29 1-13/16 2-19/32 1-1/16 12-23/64
SW30 1-7/8 3-5/64 1-17/64 14-7/8
SW31 1-15/16 3-5/64 1-17/64 14-7/8
SW32 2 3-5/64 1-17/64 14-7/8
SW34 2-1/8 3-5/64 1-17/64 14-7/8 D C
SW35 2-3/16 3-5/64 1-17/64 14-7/8
SW36 2-1/4 4-21/64 1-21/32 15-63/64
SW37 2-5/16 4-21/64 1-21/32 15-63/64
SW38 2-3/8 4-21/64 1-21/32 15-63/64
SW40 2-1/2 4-21/64 1-21/32 15-63/64
SW41 2-9/16 4-21/64 1-21/32 15-63/64
SW42 2-5/8 4-21/64 1-21/32 15-63/64
SW44 2-3/4 4-21/64 1-21/32 15-63/64
SW46 2-7/8 4-21/64 1-21/32 15-63/64
SW47 2-15/16 4-21/64 1-21/32 15-63/64
SW48 3 4-21/64 1-21/32 15-63/64
SW50 3-1/8 5-1/8 2-11/64 17-23/32
SW54 3-3/8 5-1/8 2-11/64 17-23/32 L
SW56 3-1/2 5-1/8 2-11/64 17-23/32
SW60 3-3/4 6-7/64 2-9/16 19-11/16
SW62 3-7/8 6-7/64 2-9/16 19-11/16
SW66 4-1/8 6-7/64 2-9/16 19-11/16
SW68 4-1/4 6-7/64 2-9/16 19-11/16
ATP can manufacture specialized striking wrenches to suit your individual
applications. Sizes larger than shown in the charts, open ended, short
handled, six point, etc. are available on a special order basis.

Striking Wrench Adapter

PART# DESCRIPTION

FSWA16 1”M x 1”F

FSWA12 3/4”M x 3/4”F

| 85 | 1.800.245.1148 www.onlineatp.com
Torque Multipliers
TM7550 and TM1075

OZAT’s Torque Multipliers are quality made in the USA and are a must for anybody working in maintenance, production and
equipment service where high torque applications are present. Using a planetary gear train at a ratio of 4 to 1, the input torque
increases the output torque by 4 times. Made of the finest quality materials and precision machining the ATP Torque Multipliers
will reach torque levels easier and more efficiently. Less stress on
the operators means a safer quality of work. Using a standard hand
ratchet, torque measuring ratchet or other source of input torque
and a socket on the output drive simply place the socket on the
item to be turned and brace the reaction bar against a solid fixed
object. The force applied to the input will be multiplied 4X to the
output. Use for installation or breaking loose stubborn fasteners.
The small size can fit into many tight applications where other tools
cannot.

OZAT’s Torque Multipliers can be used in combination to achieve

even higher torque values up to the maximum output capacity of
the largest multiplier.

TM Specifications
MODEL *OUTPUT **INPUT OUTPUT GEAR WEIGHT OVERALL A B C D E F
TORQUE DRIVE in DRIVE in RATIO LENGTH in in in in in in in
TM 7550 1000 1/2 3/4 4 to 1 7 Lbs. 23.50 3.50 7.00 .50 .75 3.50 18.88
TM 1075 2000 3/4 1 4 to 1 14 Lbs. 24.25 3.75 6.60 .75 1 4.63 20.50

* Output torque may vary +/- due to friction loss per multiplier
** Impact tools should not be used with OZAT torque multiplier

Reaction Bar Included

1.800.245.1148 www.onlineatp.com | 86 |
 OZAT NON STANDARD SPECIALS DESCRIPTION FOR QUOTATION

COMPANY: CONTACT:
ADDRESS:
PHONE No: FAX: E-MAIL:

SOCKET TYPE

776-6800 or [email protected]
TYPE A TYPE B TYPE C TYPE D

724-776-0227,
OPENING TYPE
SINGLE DOUBLE SINGLE DOUBLE
HEX HEX SQUARE SQUARE RECTANGULAR OTHER

Send OZAT specials request for quotation to customer service FAX: (724)
DIMENSION

B G K

F
A H J
D
E

A SQUARE DRIVE B DRIVE END DIA. C OVERALL LGTH.

D SHOULDER LENGTH E BOLT CLEAR. DEPTH F OPENING DEPTH
G NUT SIDE DIA. H ACROSS FLATS J/K REC. SIZE

APPLICATION/COMMENTS: QUANTITY(S)

| 80 |
ATP
| 87 | 1.800.245.1148 www.onlineatp.com
 HIGH PRESSURE HYDROSTATIC TEST PLUGS
THAXTON specializes in engineering and manufacturing high quality
test plugs used in hydrostatic testing of tubes, open end pipes,
pipelines and pressure vessels.

PRECISION MACHINED HARDENED STEEL, DICHROMATE PLATED, FACTORY TESTED

Standard pipe test plugs are factory tested up to 3,000 PSI depending on size. Special sizes and higher
pressures can be supplied per customer requirements. Test plugs are held in place by the steel grips
which hold against the inside wall of the pipe when the nut is tightened. At the same time, a neoprene
seal cup is compressed to make a tight seal. New seal kits may be purchased directly from the factory to
prolong the useful life of a Thaxton test plug.

NON-STANDARD TEST PLUGS ARE AVAILABLE FROM THAXTON

For special Non-Standard Test Plugs, please include the following information:
• Inside Diameter of Pipe
• Wall Thickness
• Depth Required
• Pipe Material
• Type of Test Media (Water, Oil, Gases, etc.)

WARNING: Pressure testing can be severely hazardous and safety precautions

must be followed.

WARNING: THAXTON test plugs are not to be used as lifting devices.

SAFETY GAGS
The gag is installed after the test plug is in place. The clamp
is tightened around the pipe, with the bull ring located loosely
SAFETY GAG over the stem. If the chain tightens, this would signal the
PIPE
operator to reduce pressure and retighten the test plug.
The clamp also will restrict expansion of the pipe.
TEST PLUG
ASSEMBLY
Safety Gags are available for all sizes and recommended
for use in pressure testing operations.

VIEW INSTALLATION and SAFETY VIDEO @

BULL RING CHAIN www.thaxtonplugs.com and click on Portfolio

1.800.331.3827 www.Thaxtonplugs.com | 88 |
THAXTON Test Plugs
TYPE C TYPE D
Pipe I.D. Sizes .466” to 1.00” Pipe I.D. Sizes 1” to 2.5”

• Mandrel through hole • Mandrel through hole

for filling and venting. for filling and venting.

• Specifically designed • Special sizes are

for smooth concentric available on request.
inside diameter pipe
or tubing. • Made to fit a specific
I.D. with tolerances plus
• Tolerances to plus or or minus .020”.
minus .005”.

TYPE D TYPE E External Closure

Pipe I.D. Sizes 3” to 17.5” Pipe I.D. Sizes .5” to 2.5”

• Thaxton External Closures are designed

• Mandrel through hole to quickly seal a plain-end pipe or tube,
for filling and venting. and eliminate welding on a cap for
hydrostatic testing.
• Special sizes are A perfect leak-free seal
available on request. can be achieved every
time at high pressures.
• Made to fit a specific
I.D. with tolerances plus • Manufactured from
or minus .035”. alloy steel or
stainless steel.

| 89 | 1.800.331.3827 www.Thaxtonplugs.com
THAXTON Test Plugs
SOCKET WELD PLUGS - Pipe I.D. Sizes .5”, .75”, 1”, 1.25”, 1.5”, 2”

• Special sizes are available on request.

• All Socket Weld Plugs are available with solid or vented stems.

• Our Socket Weld Plugs eliminate the need for welding plugs onto
standard socket weld openings when conducting pressure tests.

REVERSE PRESSURE PLUGS - Pipe I.D. Sizes 1.25” to 12”

• Thaxton Reverse Pressure Plugs permit testing in a relatively small section of
pipe. This avoids filling long sections of pipe with water in order to hydrostatic
test a particular weld or segment. Reverse plugs have a solid stem and are held
in place by hardened steel reverse grips. The seal is made with a neoprene ring
and all steel parts are plated to resist corrosion.

• The stem of each plug has an internal left hand thread to accommodate
installation tools (pictured below).

LARGE DIAMETER PIPE PLUGS - Pipe I.D. Sizes 18” to 24”

• Due to the size and weight of the parts, these test
plugs are furnished with a series of draw bolts used for
expanding the grip segments. The draw bolts allow the
installer to expand the grip segments evenly.

• These test plugs are equipped with a female pipe

thread in the bottom of the mandrel which allows the
customer to install a vent tube, by using a street ell and
the appropriate length of pipe. The vent tube will help
remove air pockets from the pipe when conducting
hydrostatic tests.

1.800.331.3827 www.Thaxtonplugs.com | 90 |
What’s Turning Inside Matters
Our Name Means Quality
CUSTOM GEARS

Quality Gear takes pride in providing our unique gearing related

manufacturing services. We can design new parts from scratch or replicate old and
obsolete items from samples or customer drawings, delivering solutions that meet
or surpass original specifications.

We combine the planning, design, programming, production, assembly and equipment

capabilities of a large company with the innovation, precision and personal attention
afforded by a one-on-one customer focused organization.

For Gear Solutions with Quick Turn Around Times,

Call or Email for a Quote
[email protected]

Phone: (814) 938-5552 Fax: (814) 938-5592 Web: qualitygearmfg.com

188 Blose Drive Punxsutawney PA 15767
| 91 | 1.814.938.5552 www.qualitygearmfg.com
 Custom Gearing Services:
- Hobbing and Shaping Services
- CNC Lathe, Turning and Milling Machining Centers
- CNC, OD, ID, Surface and Center-less Grinding
- Broaching Keyways and Internal Splines
- Profiling to reduce noise and vibration
- Vertical and Horizontal CNC Milling
- Keyseat Cutting and Honing
- 3 and 4-Axis Lathes

Bevel Gear Bevel Sprocket Bronze Helical Counterbalance Gear Double Helicals

Helical Shafts Herringbone Pinions Internal Couplings Internal Gear Internal Spline

Modified Spur Gear Plastics - All Grades Standard Rack Special Rack Segment Gears

Specialty Spline Spiral Bevel Splined Bevel Gear Splined Spur Gear Spur Gear

• Alloys
• Aluminum
• Brass
• Bronze
Spur Pinion Straight Bevel Timing Pulley
• Steel
• All Grades of Plastics

• O.D. from 1/4” to 40” Diameter

• I.D. to 25” Diameter

Worm Gear Worm Gear Sets Worm Shaft

1.814.938.5552 www.qualitygearmfg.com | 92 |