Scribd
Upload
32 views1 page

Sizing V Ball Fail To Open

The document is a control sizing sheet for a valve project that provides specifications for valve selection including: - The pipe has a 150mm inlet and outlet with a maximum shutoff pressure of 12 bar - The valve will control liquid water flow rates between 6 to 913 m3/h at pressures from 12 to 11 bar - A Segment valve with a metal seat and general trim was selected with a maximum capacity of 1260Cv - An B1J 12 actuator with a standard spring to open was selected to provide the torque required to operate the valve.

Uploaded by

fathan fathullah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views1 page

Sizing V Ball Fail To Open

The document is a control sizing sheet for a valve project that provides specifications for valve selection including: - The pipe has a 150mm inlet and outlet with a maximum shutoff pressure of 12 bar - The valve will control liquid water flow rates between 6 to 913 m3/h at pressures from 12 to 11 bar - A Segment valve with a metal seat and general trim was selected with a maximum capacity of 1260Cv - An B1J 12 actuator with a standard spring to open was selected to provide the torque required to operate the valve.

Uploaded by

fathan fathullah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Control Sizing Sheet

Item 1 Tag no Tag


Customer Sizing 1
Quotation Number Customer reference
Project Segment Fishelindo Date May 31, 2023
Valmet contact

Process Data
Pipe size inlet 150 mm / 6 " Max shutoff dp bar 12
Pipe size outlet 150 mm / 6 " Special service req. Normal
Schedule ScheduleStd
Valve duty Control
Fluid phase Liquid
Fluid description Water
Critical pressure atmA 221.2
Liquid specific gravity 1
1. Min 2. Normal 3. Max 4. Case
Liquid flow rate m3/h 6 460 913
Upstream temperature degC 30 30 30
Upstream pressure barG 12 11 11
Differential pressure bar 12 11 11
Downstream pressure barG 0 0 0
Vapour pressure barG 0.04 0.04 0.04
Dynamic viscosity cp 0.79 0.79 0.79

Calculated performance

1. Min 2. Normal 3. Max 4. Case


Capacity Cv 2.13 182 393
Percent of full travel % 1.5 50.5 73.1
Opening in degrees ° 8.3 51.5 71.3
Sound pressure level dBa < 85 < 85 < 85
Flow velocity (valve outlet) m/s 0.09 7.23 14.39
Pipe outlet velocity m/s 0.09 7.23 14.39
Pressure recovery factor (FL) 0.94 0.88 0.81
Choked DP bar 10.62 8.51 7.24

Valve selection
Valve type Segment Valve Valve seat (type, code, amount) Metal seated, S, 1
Valve series RE Gland packing material Graphite
Pressure class ASME Class 300 Bearing material Metal
Nominal size 150 mm / 6 "
Trim (type, option, characteristics) General
Maximum capacity 1260 Cv

Actuator sizing results


Selected actuator B1J 12 Supply pressure barG 4.2
Spring Standard spring, Spring to open

Req break to open Nm 119 Req end to close Nm 96


Opening load factor % 24 Closing load factor % 26
1. Min 2. Normal 3. Max 4. Case
Req control to open Nm 91 94 125
Ctrl open load factor % 19 24 33
Req control to close Nm 88 78 48
Ctrl close load factor % 25 17 9

https://nelprof.neles.com/opportunities/printSelected 1/1

You might also like