Gas Analyzer Measuremnt Sensitivity - GFM42

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

GFM 426

Portable Gas Analyser

The GFM 426 combines the functions of three instruments in one portable gas analyser. Making all work steps as easy
as possible for you. Measuring gas channels, pressure and flow with a built-in data logger for landfill gas extraction.
Operation is extremely simple, yet the readings obtained are comprehensive and accurate.

• 5 gas analysis channels


CH4 CO2 O2 • Measure Atmospheric, Static and Differential pressures
• Simple reporting - via SiteMan PC software
• Small portable design - easy to hold in one hand
• 12-month service interval
H2S CO

Applications
Landfill Gas Extraction Waste to Energy

Landfill Gas Perimeter Monitoring

Key Benefits
Suitable Solutions Real-Time Data Cost-effective
Gas Data equipment has a wide The GFM series supports site Versatile, lightweight and easy to
range of internal gas sensors and operations in the best possible way. use. The GFM range doesn’t require
external attachments, giving you the Quickly and easily, it captures any specialist knowledge, delivering
choice and freedom to information in just a few minutes, valuable data at your fingertips.
purchase your monitoring solution giving you visibility of the A 4-hour charge from flat provides 8
tailored to your operations. production and quality of the gases. hours of continuous use.
GFM 426
Portable Gas Analyser
Technical Specifications

General
ATEX, IECEX, UKEx
Rating
II 2 G Ex ib IIB T1 Gb
Dimensions 230mmx100mmx65mm
Weight 1kg
Ambient Temperature Range -10ºc to 40ºc
Protection Rating IP65

Aspiration Rating 500mil/min

Gas Measurements

Channel Sensor Type Range Resolution Accuracy

CH4
0-100% 0.1% ±3.0%
IR
CO2
0-100% 0.1% ±3.0%

O2
0-25% 0.1% ±0.1%

H2S EC 0-5000ppm 1ppm ±50ppm

CO
0-2000ppm 10ppm ±100ppm

LEL
Calculation 0-100% 0.10% ±3.0%

Pressure Measurements
Atmospheric 800 - 1200mbar 1mbar ± 2mbar
Transducer
Static ± 100mbar 1mbar ±5mbar
Differential ± 30mbar 0.01mbar ± 0.5mbar

Optional Measurements
Flow Calculation 0-30Nm3hr-1 0.1m3hr-1 ± 5%

Vane Anemometer 0.7-40ms-1 0.1ms-1 ± 0.5ms-1


Velocity

Thermistor -10-100°C 0.5°C ± 1.0°C


Temperature

All GFMs are available to hire or purchase. Please contact our team for details.

GFM 426 Specific Features Certifications

• Wellhead gas flow rate


• Storage of 2 water level readings from water level dipmeter taken at each borehole
• Manual data storage and programmable unattended data logging functions
• 3 tier hierarchical 24 character alphanumerical labels for the naming of stored reading sets
Advantages of our Annual Servicing & Calibration offering are:

• Complete service of your instrument including, • 12-month warranty covering any parts required
replacing any faulty parts or parts nearing the end of This is intended to cover internal component failures.
their life Faults caused by negligence, accident, physical
• Recalibration of the instrument damage, missing parts e.g. (gas filters and batteries),
will not be repaired free of charge, but cost estimates
• Highly experienced servicing team, equipped
will be supplied for approval before any work is done
to service, calibrate and repair your instruments
worldwide • Gas Data arranged collection and delivery of your
instrument (the UK addresses only)
• Excellent customer service and response time

+44 (0)24 7630 3311 [email protected] www.gasdata.co.uk

You might also like