Unite Your Audience

The Martin Audio Experience

PRODUCT CATALOGUE 2023

Contents
OPTIMISED ARRAYS
Multi-cellular Loudspeaker Array (MLA®) Self-Powered Systems 2-11
Wavefront Precision Passive Systems 12-15
O-LINE – Micro Line Array 16-17
TORUS – Constant Curvature Array 18-21
VU-NET™ Software 22
DISPLAY™ Software 23-25

SUBWOOFERS
SX Series 26-31

STAGE MONITORS
XE Series 32-33
LE Series 34-35

SELF-POWERED POINT SOURCE

CDD-LIVE! Series 36-37
BlacklineX Powered Series 38-39

PASSIVE POINT SOURCE

TH Series 40-41
FlexPoint Series 42-45
BlacklineX Series 46-49
CDD™ Series 50-53
CDD Weatherised™ Series 54-57
ADORN Commercial Series 58-61

ELECTRONICS
Amplifiers 62-65
Digital Loudspeaker Controllers 66-67

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com improvement, we reserve the right to alter these specifications without prior notice.
1
 OPTIMISED ARRAYS : MULTI-CELLULAR LOUDSPEAKER ARRAY

Multi-cellular Loudspeaker
Array (MLA®) Systems

With multiple awards for innovation, the MLA Series —

comprising MLA, MLA Compact and MLA Mini — represents
the first fundamental change in array technology since the
introduction of line array over twenty years ago.

MLA’s combination of cellular drive and automated numerical

optimisation delivers much more consistent sound across the
audience, puts an end to trial-and-error tuning sessions and
reduces sound spill — both on stage and beyond the audience
boundary.

MLA technology is a departure from the principles behind

conventional line arrays, where the focus is on producing
coherent wavefronts as they exit the speaker grilles — giving the
user little control over what reaches the ears of the audience.
MLA cellular technology takes the opposite approach — the
user specifies the SPL and frequency response required at the
front rows, the mix position and the rear seats, and intelligent
optimisation software automatically determines the array
configuration and controls each individual cell in the array to
produce that result.

The MLA Series offers new solutions — the MLA touring system
resolves the conflicting requirements of audience and local
residents at outdoor festivals by delivering the highest sound
levels out-front without exceeding strict noise pollution levels
off-site. At the other end of the scale, the versatile MLA Mini
opens up a wide range of portable live sound applications for
smaller venues, as well as a myriad of installation opportunities.
Sziget Festival, Hungary

2 martin-audio.com/products/series/mla-systems
 OPTIMISED ARRAYS : MULTI-CELLULAR LOUDSPEAKER ARRAY

Glastonbury, UK

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/mla-systems improvement, we reserve the right to alter these specifications without prior notice.
3
 OPTIMISED ARRAYS : MULTI-CELLULAR LOUDSPEAKER ARRAY

MLA Cellular Technology

MLA, MLA Compact and MLA Mini all feature cellular drive
— where each LF, MF and HF cell in the array has its own
onboard DSP and amplification under the control of DISPLAY™
automated intelligent software. A 24-box MLA system will have
144 individual cells, a 16-box MLA Compact system will have 80
cells, and a 16-box MLA Mini will have 32 cells.

With each cell in the array under computer control, MLA Series
systems are not constrained by the 3dB decrease in SPL with
doubling of distance associated with conventional line arrays —
enabling the engineer’s exact mix to be delivered throughout the
audience with a degree of control, consistency and repeatability
not previously possible.
MLA cellular drive
‘Hard avoid’ areas, such as on-stage, ceilings, balcony edges and
beyond the venue perimeter can be programmed in and vertical
coverage can also be fine-tuned after rigging without the need to
reposition the array or change the inter-cabinet splay angles.

By departing from line array convention, and focusing on what

arrives at the audience instead of what leaves the array, MLA
cellular technology holds both SPL and frequency response within
a very tight window – from the front rows to the rear balconies.

Automated optimisation

4 martin-audio.com/products/series/mla-systems
 OPTIMISED ARRAYS : MULTI-CELLULAR LOUDSPEAKER ARRAY

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/mla-systems improvement, we reserve the right to alter these specifications without prior notice.
5
 OPTIMISED ARRAYS : MULTI-CELLULAR LOUDSPEAKER ARRAY

MLA System
MLA system components comprise the MLA 3-way array enclosure, MLD
downfill and MLX Sub-bass. MLA is a fully-integrated system, with Class D
amplification, U-NET™ control network and DSP all integrated within each
enclosure – simplifying set-up and eliminating long, heavy-gauge cable runs.

An MLA touring system is complete and ready-to-use, with enclosures,

flying hardware, software, cabling, flight cases and training all included in
the system package.

FEATURES
• Cellular array with built-in amplification, DSP and digital networking
• 6 dedicated Class D amplifier channels per enclosure for individual
powering and DSP control of individual cells
• Switch mode power supply with PFC (Power Factor Correction) and
global mains voltage operation
• Three-way all-horn design delivers LF/MF/HF peak SPL’s of
140/139/145 dB @ 1m from a single enclosure MLA arrray
• Fast, integral flying system for suspension of up to 24 enclosures
• True 90° (-6dB) horizontal constant directivity, mid and high frequency
pattern control. Consistent and usable out to 120° (-10dB)
• 60Hz-18kHz ± 3dB full bandwidth frequency response

APPLICATIONS
• Large-scale touring sound reinforcement for outdoor festivals, stadiums,
arenas and concert halls
• Premium fixed installations in concert halls, theatres and sports venues

MLX sub-bass

6 martin-audio.com/products/series/mla-systems
 OPTIMISED ARRAYS : MULTI-CELLULAR LOUDSPEAKER ARRAY

Royal Albert Hall, UK

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/mla-systems improvement, we reserve the right to alter these specifications without prior notice.
7
 OPTIMISED ARRAYS : MULTI-CELLULAR LOUDSPEAKER ARRAY

MLA Compact
Scalable and versatile, MLA Compact brings MLA technology to the
wide range of applications that do not require the full power and throw
of the MLA. Its compact size belies its output capabilities – a 12-box
MLA Compact array can easily deliver full rock SPL’s in a 5000 seat
venue, whilst a 24-box array will approach the output of many ‘full-size’
systems.

The MLA Compact is partnered by either the DSX ground-stacked,

powered sub-bass, or the DSX-F flying version.

FEATURES
• Cellular array with built-in amplification, DSP and digital networking
• 5 dedicated Class D amplifier channels per enclosure for individual
powering and DSP control of individual cells
• Switch mode power supplies with PFC (Power Factor Correction) and
global mains voltage operation
• Three-way all-horn design delivers LF/MF/HF peak SPL’s of
135/135/135 dB @ 1m from a single, compact enclosure
• Fast, integral flying system for suspension of up to 24 enclosures
• True 100° (-6dB) horizontal constant directivity, mid and
high frequency pattern control. Consistent and usable out to
130° (-10dB)
• 65Hz-18kHz ± 3dB full bandwidth frequency response

APPLICATIONS
• Premium touring sound reinforcement for medium-size venues
• Fixed installations in concert halls, theatres, ballrooms and HoW
• Side hang for MLA festival and arena systems

DSX-F

8 martin-audio.com/products/series/mla-systems
 OPTIMISED ARRAYS : MULTI-CELLULAR LOUDSPEAKER ARRAY

Orpheum Theatre, New York

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/mla-systems improvement, we reserve the right to alter these specifications without prior notice.
9
 OPTIMISED ARRAYS : MULTI-CELLULAR LOUDSPEAKER ARRAY

MLA Mini
The ultra-compact MLA Mini brings revolutionary MLA cellular technology
to smaller-scale portable and installed sound applications. Its very
small footprint and light weight make it the system of choice for small-
to-medium venues. MLA Mini is designed as a complete system, with
complementary MSX mini-sub power plant, which houses networking, DSP
and 9 channels of Class D amplification necessary to power and control
itself and 4 MLA Mini enclosures. MLA Mini can also operate as a plug-
and-play system using onboard presets instead of computer control.

FEATURES
• Cellular array format with amplification, DSP and digital networking
housed in companion MSX sub-bass
• 2 Class D amplifier channels per enclosure for individual powering and
DSP control of LF and HF cells
• Switched mode power supplies with PFC (Power Factor Correction) and
global mains voltage operation
• Two-way design delivers LF/HF peak SPL’s of 130/129dB @ 1m from a
single, ultra-compact enclosure
• Fast, integral flying system for suspension of up to 16 MLA Minis
• True 100° (-6dB) horizontal constant directivity
• 76Hz-18kHz ± 3dB frequency response
• Scalable for audiences of 100-3,000

APPLICATIONS
• Small-to-medium scale live music venues and theatres
• Portable live sound and AV events
• Fixed installations in concert halls, theatres, ballrooms and HoW
• Side-fill for MLA Compact systems

10 martin-audio.com/products/series/mla-systems
 OPTIMISED ARRAYS : MULTI-CELLULAR LOUDSPEAKER ARRAY

Henley Festival, UK

Corona Sunset Sessions, Columbia Disrupt Summit, South Africa

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/mla-systems improvement, we reserve the right to alter these specifications without prior notice.
11
 OPTIMISED ARRAYS : WAVEFRONT PRECISION

Optimised
Line Array Systems
In recent years, Martin Audio’s award-winning MLA systems
have raised the expectations of audiences, sound engineers
and promoters worldwide. With independent drive of
individual acoustic cells controlled by industry-leading
DISPLAY™ optimisation software, MLA technology delivers
unmatched sound quality and coverage consistency while
reducing sound-spill.
Drawing on the research and technology behind MLA,
the Wavefront Precision Series is a new generation of
multipurpose line arrays designed to bring Martin Audio’s
legendary sound, coverage consistency and control to a
broader range of touring applications, installations and
budgets.
Comprising of WPL, WPC, WPS and WPM, Wavefront
Precision line arrays are designed as complete systems with
external iKON® multi-channel amplifiers and optimised by
automated DISPLAY software.
Adopting the principle of scalable resolution, with external,
dedicated multi-channel amplifiers, Wavefront Precision
line arrays are uniquely flexible, upgradeable and financially
accessible.

12 martin-audio.com/products/series/wavefront-precision
 OPTIMISED ARRAYS : WAVEFRONT PRECISION

WPL WPC

WPL is a full-scale line array which is capable of exceptionally high The WPC is a three-way, bi-amp system, featuring horn-loaded low-
output for its modest size and weight. A three-way, bi-amped system, frequency, mid and HF sections to raise efficiency and increase
its very high output is achieved by utilising Martin Audio’s trademark output. The low frequency section consists of 2 x 10” (250mm)
horn-loading technology across all frequency bands — increasing the neodymium drivers in a unique Hybrid® configuration which marries
acoustic output of the low frequency section, as well as the midrange the benefits of horn and reflex loading. Each driver is slot-loaded
and HF. into a short horn to give a high sensitivity of 103dB @ 1m/2.83V,
while the rear of the driver is reflex-loaded to extend the LF output.
It incorporates 2 x 12” (300mm) drivers with Hybrid® horn/reflex
The punch and low-frequency extension produced from such a small
loading, 2 x 6.5” (165mm) cone drivers on a midrange horn which
enclosure volume are remarkable.
covers the vocal frequency range from 300Hz to 4kHz, and 3 x 1”
(25mm) exit HF drivers operating from 4kHz upwards. Each section Mid and HF horns are physically separate — a key factor in WPC’s
features innovative horn-loading techniques and refinements which exemplary 100° horizontal constant directivity dispersion pattern.
raise the acoustic performance of WPL to a superior level — both in The midrange horn design utilises 2 x 5” (125mm) neodymium
terms of output and smooth 90° horizontal coverage patterns of the drivers to produce a high SPL of 109dB @ 1m/2.83V, while the
mid and HF horns. Sonically, WPL’s exemplary horizontal dispersion HF section employs 4 x 0.7” (19mm) exit neodymium compression
pattern translates to an incredibly consistent frequency response off- drivers which feed 4 individual horns. Use of multiple small HF
axis, with minimal variation from the on-axis response. drivers instead of a more traditionally-used large format compression
driver results in less distortion and a more extended HF response.
The maximum peak outputs of the LF, Mid and HF sections are
139dB, 140dB and 145dB per enclosure @ 1m and 6dB crest
factor, respectively — ensuring that a WPL array will meet the most
demanding requirements for throw and clarity in the largest venues
and outdoor events.

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/wavefront-precision improvement, we reserve the right to alter these specifications without prior notice.
13
 OPTIMISED ARRAYS : WAVEFRONT PRECISION

WPS WPM

A passive 3-way system which integrates a high density of drive A passive 2-way system with an impedance of 16 ohms, it can be
units in a very compact enclosure. It features 2 x 8” (200mm) LF driven in blocks of 1, 2, 3 or 4 resolution configuration. With a
drivers, 4 x 4” (100mm) midrange drivers and 4 x 1” (25mm) exit HF complement of 2 x 6.5” (165mm) LF drivers and a vertical column
compression drivers loaded by a moulded HF horn which occupies the of 3 x 1.4” (35mm) aluminium dome HF drivers, the acoustic
full width of the enclosure — defining the 100° horizontal constant design of WPM is uniquely innovative. The LF drivers are located
directivity coverage pattern of both the HF and midrange sections. in the side walls of the HF horn — an arrangement which would
introduce acoustic cavities which would degrade the horizontal
The 4” midrange drivers are compression-loaded to raise efficiency dispersion if conventional cone drivers were used. WPM’s drivers
and enter the horn walls via annular slots close to the HF throat to adopt an elegant solution by having solid moulded diaphragms
sum effectively with the HF wavefront. In the HF section, four 1” exit which match the contours of the horn walls and maintain the
compression drivers deliver pristine high frequency sound without the continuity of the horn profile.
harshness and distortion associated with larger format devices.
Each LF driver also features a demodulation ring in the neodymium
The 8” LF drivers are set back behind the walls of the HF horn, with motor system to minimize distortion and maximise mid-band output.
a small volume of air in front of each driver increasing the output at
In the triple-driver HF section, each individual HF wavefront is
the upper end of its operating range. The LF exit apertures are spaced
precisely coupled to the horn throat via a short waveguide for
apart horizontally to provide useful LF horizontal pattern control.
faultless 100° horizontal constant directivity coverage.

Newcastle University, NSW, Australia

14 martin-audio.com/products/series/wavefront-precision
 OPTIMISED ARRAYS : WAVEFRONT PRECISION

WPL WPS
TYPE Three-way, bi-amp line array element TYPE Three-way, passive line array element
FREQUENCY RESPONSE (5) 52Hz-18kHz ± 3dB FREQUENCY RESPONSE (5) 70Hz-18000Hz ± 3dB
DRIVERS LF: 2 x 12” (300mm)/3” (75mm) DRIVERS LF: 2 x 8” (200mm)/2” (50mm) voice coil, long
voice coil, ultra-long excursion, excursion, vented yoke, neodymium magnet drivers
neodymium magnet drivers, MF: 4 x 4” (100mm)/1” (25mm) coil, neodymium
Hybrid® bass horn loaded magnet drivers, compression loaded
MF: 2 x 6.5” (165mm)/2” (50mm) coil, HF: 4 x 1” (25mm) exit/1.4” (35mm) HT Polymer
neodymium magnet drivers, horn loaded diaphragm, neodymium magnet compression drivers
HF: 3 x 1” (25mm) exit neodymium magnet SYSTEM AMPLIFIER iKON iK42
compression drivers, horn loaded SYSTEM RESOLUTION 1 to 3 enclosures per amplifier channel (iK42)
SYSTEM AMPLIFIER iKON iK42 MAXIMUM SPL (9) 133dB peak
SYSTEM RESOLUTION 1 or 2 enclosures per pair of amplifier channels (Bi-amp) NOMINAL IMPEDANCE 6 ohms
MAXIMUM SPL (9) LF: 139dB, MF: 140dB, HF: 145dB DISPERSION 100º horizontal (-6dB), 120º horizontal (-10dB),
NOMINAL IMPEDANCE LF: 8 ohms, MF + HF: 8 ohms 10° vertical
DISPERSION 90º horizontal (-6dB), 120º horizontal (-10dB) CROSSOVER 520Hz, 1.6kHz internal passive
7.5° vertical ENCLOSURE Vertical trapezoid with 5˚wall angle,
CROSSOVER 320Hz active, 4kHz internal passive multi-laminate birch and poplar-ply construction
ENCLOSURE Vertical trapezoid with 3.75º wall angle, FINISH Black textured paint
multi-laminate birch and poplar-ply construction PROTECTIVE GRILLE Black HEX perforated steel
FINISH Black textured paint FITTINGS 3-point rigging system, 2 x side pocket handles
PROTECTIVE GRILLE Black HEX perforated steel 2 x rear grip handles
DIMENSIONS (ex. pins) (W) 1136mm x (H) 371mm x (D) 526mm DIMENSIONS (W) 650mm x (H) 261mm x (D) 400mm
(W) 44.7in x (H) 14.6in x (D) 20.7in (W) 25.6in x (H) 10.3in x (D) 15.8in
WEIGHT 64kg (141lbs) WEIGHT 27kg (60lbs)

WPC WPM
TYPE Three-way, bi-amp line array element
FREQUENCY RESPONSE (5) 65Hz-18kHz ± 3dB
DRIVERS LF: 2 x10” (250mm)/2.5” (63mm) voice coil,
long excursion, vented pole, neodymium TYPE Two-way, passive line array element
magnet drivers, Hybrid® slot-horn loaded FREQUENCY RESPONSE (5) 76Hz-18kHz ± 3dB
MF: 2 x 5” (125mm)/1.5” (38mm) coil, neodymium DRIVERS LF: 2 x 6.5” (165mm) contoured-diaphragm
magnet drivers, horn loaded /2” (50mm) edge-wound CCAW voice coil,
HF: 4 x 0.7” (19mm) exit neodymium magnet neodymium magnet drivers, reflex loaded
compression drivers, horn loaded HF: 3 x 1.4” (35mm) aluminium dome /1.4” (35mm)
SYSTEM AMPLIFIER iKON iK42 voice coil, neodymium magnet compression drivers
SYSTEM RESOLUTION 1 to 3 enclosures per pair of amplifier channels (Bi-amp) on constant-directivity waveguide
MAXIMUM SPL (9) 135dB peak SYSTEM AMPLIFIER iKON iK42, iK81
NOMINAL IMPEDANCE LF: 8 ohms, MF + HF: 8 ohms SYSTEM RESOLUTION 1 to 4 enclosures per amplifier channel
DISPERSION 100º horizontal (-6dB), 130º horizontal (-10dB), 10° vertical MAXIMUM SPL (9) 130dB peak (1 cabinet)
CROSSOVER 440Hz active, 4.4kHz internal passive NOMINAL IMPEDANCE 16 ohms
ENCLOSURE Vertical trapezoid with 5º wall angle, DISPERSION 100º horizontal (-6dB), 125º horizontal (-10dB)
multi-laminate birch and poplar-ply construction 10° vertical
FINISH Black textured paint DIMENSIONS (W) 500mm x (H) 185mm x (D) 377mm
PROTECTIVE GRILLE Black HEX perforated steel (W) 19.7in x (H) 7.3in x (D) 14.8in
DIMENSIONS (W) 772mm x (H) 319mm x (D) 421mm WEIGHT 14kg (30.9lbs)
(W) 30.4in x (H) 12.6in x (D) 16.6in
WEIGHT 35kg (77.1lbs)

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/wavefront-precision improvement, we reserve the right to alter these specifications without prior notice.
15
 OPTIMISED ARRAYS : O-LINE™

O-Line ™

NOW WITH SCALABLE RESOLUTION

O-Line™ is a versatile, micro-line array now with scalable resolution designed to tame a wide
variety of architectural and challenging acoustic environments.
O-Line delivers consistent audio coverage with unprecedented accuracy in a wide variety of
architectural environments, using just one amplifier channel per array in many applications.
By utilising a complement of unique, Martin Audio designed drivers, and mechanical
alignment techniques, simple EQ and Limiting is the only processing required.
O-Line is an award winning aesthetically pleasing modular micro line array designed for a wide
variety of architectural applications – from houses of worship to transport terminals.
It combines innovative acoustic design with powerful optimisation software to achieve
optimum coverage with unprecedented accuracy over a pre-defined area.
In many applications an O-Line array can be driven using only one amplifier channel, with
simple EQ and limiting the only processing required.
It can now also be taken into a new dimension of coverage, consistency and control
when combined with an iKON iK81 eight-channel amplifier with onboard DSP to
independently control and power each individual enclosure. This unlocks the full potential
of O-Line — further refining coverage consistency and increasing the ability to ‘dial-out’
the influence of the room by accessing DISPLAY’s ‘hard avoid’ capability and electronically
adjustable coverage.
Unlike many DSP ‘steered’ columns, an O-Line array does not produce unwanted vertical
sidelobes in the audio band. This is critical in reverberant environments as sidelobes firing
above and below the array simply adds to the reverberant energy, impacting on intelligibility.
O-line’s ability to reproduce very high frequencies without sidelobes makes it the ideal
solution for both full-range speech and music reproduction in reverberant spaces.
An O-Line array is finished in a neutral light grey that blends into the background of most
architectural spaces with modular design in multiples of four cabinets. Sonically, it is very
clean and musical, and capable of surprisingly high output levels for its very small size with
St Andrews Cathedral, Sydney, Australia 16 cabinets capable of an astonishing 134dB [peak] and a throw distance of up to 40 metres.

16 martin-audio.com/products/series/o-line
 OPTIMISED ARRAYS : O-LINE™

O-Line™

TYPE Two-way micro line array module

FREQUENCY RESPONSE (5) 85Hz-20kHz ± 3dB, -10dB @ 76Hz
DRIVERS 2 x 3.5” (87mm)/1” (25mm) voice coil LF drivers
5 x 0.55” (14mm) soft dome tweeters
RATED POWER (2) 50W AES, 200W peak
SENSITIVITY (8) 84dB at LF rising to 92dB at HF
MAXIMUM SPL (9) 104dB continuous, 110dB peak
NOMINAL IMPEDANCE 16 ohms
DISPERSION (-6dB) 100º horizontal, 5º vertical
CONNECTORS 4 pole socket
FITTINGS 6 x M8 fixings for wall and flying brackets
DIMENSIONS (W) 246mm x (H) 115mm x (D) 198mm
(W) 9.7ins x (H) 4.5ins x (D) 7.8ins
WEIGHT 3.6kg (7.9lbs) Palacio Congresos Oviedo, Spain

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/o-line improvement, we reserve the right to alter these specifications without prior notice.
17
 OPTIMISED ARRAYS : TORUS

TORUS – Constant Curvature Array

For short and medium-throw applications of typically 15-30m (50- Designed for professional sound reinforcement and fixed installations,
100ft), a full-blown line array is not always practical, optimal or TORUS cabinets can be arrayed either vertically or horizontally —
affordable. Conversely, a point-source solution may not be able to offering full configuration flexibility to match the coverage and SPL
achieve sufficient coverage with the SPL required. requirements of the venue.
TORUS constant curvature arrays are designed to fill that gap perfectly. Drawing on extensive research, technologies and optimisation software,
TORUS also overcome issues associated with typical constant
Adopting a hybrid approach between line array and point-source,
curvatures — advancing the constant curvature acoustic concept to
TORUS arrays can be configured to deliver plenty of power over a
achieve new levels of performance and refinement.
specified area — combining optimised coverage and SPL profile with
cost efficiency.

18 martin-audio.com/products/series/torus
 OPTIMISED ARRAYS : TORUS

T1230 T1215

TYPE Passive 2-way Constant Curvature 30° enclosure TYPE Passive 2-way Constant Curvature 15° enclosure
FREQUENCY RESPONSE 65Hz – 18kHz ± 3dB, -10dB @ 50Hz FREQUENCY RESPONSE 65Hz – 18kHz ± 3dB, -10dB @ 50Hz
(with iKON settings) (with iKON settings)
DRIVERS LF: 12”, 3” Voice Coil, Neodymium DRIVERS LF: 12”, 3” Voice Coil, Neodymium
HF: 3 x 1” exit, 1.4” Voice Coil, HT Polymer dome HF: 3 x 1” exit, 1.4” Voice Coil, HT Polymer dome
neodymium compression driver neodymium compression driver
SENSITIVITY (2.83V 1m free-field) 99dB SENSITIVITY (2.83V 1m free-field) 100dB
NOMINAL IMPEDANCE 8 ohms NOMINAL IMPEDANCE 8 ohms
RATED POWER AES 400W, PEAK 1600W RATED POWER AES 400W, PEAK 1600W
MAXIMUM SPL (SYSTEM) 126dB continuous, 132dB peak* MAXIMUM SPL (SYSTEM) 128dB continuous, 134 dB peak*
DISPERSION 60-75-90° horizontal, 30° vertical DISPERSION 60-75-90° horizontal, 15° vertical
PIN CONNECTIONS (INPUT) 1+/- or 2+/- PIN CONNECTIONS (INPUT) 1+/- or 2+/-
PIN CONNECTIONS (LINK) 1+/- and 2+/- PIN CONNECTIONS (LINK) 1+/- and 2+/-
DIMENSIONS (W) 650mm, (H) 350mm, (D) 442mm DIMENSIONS (W) 650mm, (H) 369mm, (D) 452mm
(W) 25.59ins, (H) 13.76ins, (D) 17.40ins (W) 25.59ins, (H) 14.51ins, (D) 17.80ins
WEIGHT 26kg (57.32 lbs) WEIGHT 31kg (68.34 lbs)

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/torus improvement, we reserve the right to alter these specifications without prior notice.
19
 OPTIMISED ARRAYS : TORUS

Clockstock Festival, UK

20 martin-audio.com/products/series/torus
 OPTIMISED ARRAYS : TORUS

T820

TYPE Passive 2-way, 8” Constant Curvature 20° enclosure

FREQUENCY RESPONSE 70Hz – 18kHz ± 3dB, -10dB @ 56Hz
(with iKON settings)
DRIVERS LF: 8” with 2” Voice coil, Neodymium
HF: 2 x 1” exit, 1.4” Voice coil, HT Polymer dome
neodymium compression driver
SENSITIVITY (2.83V 1m free-field) 97dB
NOMINAL IMPEDANCE 8 ohms
RATED POWER AES 200W, PEAK 800W
MAXIMUM SPL (SYSTEM) 124dB continuous, 130dB peak*
DISPERSION 100° horizontal, 20° vertical
PIN CONNECTIONS (INPUT) 1+/- or 2+/-
PIN CONNECTIONS (LINK) 1+/- and 2+/-
DIMENSIONS W) 500mm, (H) 257mm, (D) 320mm The Broadberry, USA
(W) 19.69ins, (H) 10.12ins, (D) 12.60ins
WEIGHT 14kg (13.86 lbs)

Perdido Bay United Methodist Church, USA

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/torus improvement, we reserve the right to alter these specifications without prior notice.
21
 OPTIMISED ARRAYS : SOFTWARE

VU-NET – Control Software

The MLA series, CDD-LIVE series and any iKON amplifier-based
system can all be remotely controlled from a PC or tablet running
VU-NET control software. As well as monitoring and control of
the system, EQ optimisations are uploaded from the program
and cabinet firmware is checked and updated all via the intuitive
graphical interface.

22 martin-audio.com/support/software
 OPTIMISED ARRAYS : SOFTWARE

DISPLAY 2 – Optimisation and Prediction Software

DISPLAY 2 is the brain of the MLA Series,
Wavefront Precision Series and O-Line. Its
numerical optimisation process eliminates
lengthy trial-and-error tuning sessions, so
that an MLA or Wavefront Precision system
achieves the required audience coverage
straight out of the box.

Based on a detailed acoustic model of

array behaviour, it gives a very accurate
prediction of the direct sound produced
over the audience as well as areas where
sound is to be reduced.
Step 1: Venue entry Step 2: Set coverage parameters
It takes the guesswork out of array design,
deployment and control – generating
highly accurate spot frequency responses
and comprehensive rigging information,
including mechanical load safety analysis.

The intelligent optimisation process

evaluates configurations of potential arrays
against various target functions — such
as frequency response, flatness and sound
leakage into non-audience areas. With the
computer working behind the scenes, the
engineer retains full artistic control over
the house curves — DISPLAY 2 simply Step 3: Calculate splay angles Step 4: Optimisation and upload
replicates what the engineer hears at the
mix position to the entire audience.*
*For Wavefront Precision and O-Line, audience coverage consistency is also dependent
upon the level of amplification per box.

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/support/software improvement, we reserve the right to alter these specifications without prior notice.
23
 OPTIMISED ARRAYS : SOFTWARE

DISPLAY 3 – 3D Prediction Software

DISPLAY 3 is an all-new 3D prediction software program,
currently in beta, that in time will incorporate all of our
current portfolio, for or a complete self-contained system
design and prediction platform.

24 martin-audio.com/support/software
 OPTIMISED ARRAYS : SOFTWARE

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/support/software improvement, we reserve the right to alter these specifications without prior notice.
25
 SUBWOOFERS : SX SERIES

SX Subwoofers
Martin Audio’s SX Series of subwoofers are designed to
meet a multitude of installation and live sound application
needs that call for increased impact and low frequency
performance, partnering with our loudspeakers across the
portfolio.

SX subwoofers offer a full complement passive and select

self-powered options including everything from a slim line
single 10” (SX110) for discreet install purposes through to
the all-powerful chest thumping efficiency of the double-
eighteen Hybrid® Horn/Reflex SXH218 suitable for concerts,
festivals and nightclubs.

26 martin-audio.com/products/series/sx
 SUBWOOFERS : SX SERIES

SX110 SX112
TYPE Ultra-compact, direct radiating subwoofer TYPE Compact, single driver, direct radiating subwoofer
FREQUENCY RESPONSE (1) 50Hz-150Hz ± 3dB FREQUENCY RESPONSE (1) 48Hz-150Hz ± 3dB, -10dB @ 35Hz
-10dB @ 42Hz DRIVER 12” (300mm)/3” (75mm) voice coil, long excursion,
DRIVER 1 x 10” (250mm)/2” (50mm) voice coil, long ferrite magnet, waterproof cone
excursion, ferrite magnet RATED POWER (2) 400W AES, 1600W peak
RATED POWER (2) 250W AES, 1000W peak RECOMMENDED AMPLIFIER iK81 / VIA2502/5002/5004
RECOMMENDED AMPLIFIER VIA 2502 SENSITIVITY (10) 100dB
SENSITIVITY (10) 97dB MAXIMUM SPL (9) 126dB continuous, 132dB peak (half space)
MAXIMUM SPL (9) 121dB continuous, 127dB peak (half space) NOMINAL IMPEDANCE 8 ohms
NOMINAL IMPEDANCE 8 ohms CONNECTORS 2 x NL4 type
DISPERSION (-6dB) Omnidirectional FITTINGS 12 x M10 inserts
CROSSOVER 80-120Hz active DIMENSIONS (W) 487mm x (H) 390mm x (D) 410mm
ENCLOSURE Plywood (W) 19.2ins x (H) 15.4ins x (D) 16.1ins
FINISH Black or white WEIGHT 21.5kg (47.3lbs)
PROTECTIVE GRILLE Perforated steel
CONNECTORS 2 x NL4 type
PIN CONNECTIONS (INPUT) +1, -1 Link through: +2, -2
PIN CONNECTIONS (LINK) +1, -1 Link through: +2, -2
FITTINGS 12 x M8 inserts
DIMENSIONS (INCL FEET) (W) 417mm x (H) 297mm x (D) 415mm
(W) 16.4ins x (H) 11.7ins x (D) 16.3ins
WEIGHT 12kg (26.5lbs)

SX210 SX212
TYPE Slimline, direct radiating subwoofer
FREQUENCY RESPONSE (1) 50Hz-150Hz ± 3dB
-10dB @ 42Hz TYPE Compact, dual-driver, direct radiating subwoofer
DRIVER 2 x 10” (250mm)/2” (50mm) voice coil, long excursion, FREQUENCY RESPONSE (1) 48Hz-150Hz ± 3dB, -10dB @ 35Hz
ferrite magnet DRIVER 2 x 12” (300mm)/3” (75mm) voice coil, long excursion,
RATED POWER (2) 500W AES, 2000W peak ferrite magnet, waterproof cone
RECOMMENDED AMPLIFIER VIA 2004/5002/5004 RATED POWER (2) 800W AES, 3200W peak
SENSITIVITY (10) 103dB RECOMMENDED AMPLIFIER iK42 / VIA5002/5004
MAXIMUM SPL (9) 127dB continuous, 133dB peak (half space) SENSITIVITY (10) 106dB
NOMINAL IMPEDANCE 4 ohms MAXIMUM SPL (9) 132dB continuous, 138dB peak (half space)
CONNECTORS 2 x NL4 type NOMINAL IMPEDANCE 4 ohms
FITTINGS 16 x M8 inserts, 2 x bar handles CONNECTORS 2 x NL4 type
DIMENSIONS (INCL FEET) (W) 718mm x (H) 295mm x (D) 465mm FITTINGS 12 x M10 inserts
(W) 28.3ins x (H) 11.4ins x (D) 18.3ins DIMENSIONS (W) 872mm x (H) 390mm x (D) 437mm
WEIGHT 20kg (44.1lbs) (W) 34.3ins x (H) 15.4ins x (D) 17.2ins
WEIGHT 39kg (86lbs)

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/sx improvement, we reserve the right to alter these specifications without prior notice.
27
 SUBWOOFERS : SX SERIES

SX115 SXCF115
TYPE Direct radiating subwoofer TYPE Compact, cardioid subwoofer
CROSSOVER FREQUENCY 100Hz FREQUENCY RESPONSE (1) 44Hz – 150Hz ±3dB, -10dB @ 36Hz
FREQUENCY RESPONSE 4π (5) 45Hz - 100Hz ± 3dB, -10dB @ 36Hz DRIVERS 15” (380mm)/4” (100mm) voice coil, long excursion,
DRIVERS LF: 15” with 4” Voice coil, Ferrite Motor ferrite magnet, waterproof cone
SENSITIVITY (2.83V 1m half space) 100dB 12” (300mm)/4” (100mm) voice coil, long excursion,
neodymium magnet, waterproof cone
NOMINAL IMPEDANCE 8 Ohms RATED POWER (2) 15”: 1000W AES, 4000W peak
12”: 800W AES, 3200W peak FITTINGS
RATED POWER AES 1000W, PEAK 4000W SENSITIVITY (10) 101dB Two skids on base, with mating channels on top
MAXIMUM SPL (SYSTEM) 130dB continuous, 136dB peak, 142dB peak (12dB) MAXIMUM SPL (9) 137dB peak M20 top-mounted thread plate for pole mounting
NOMINAL IMPEDANCE 15”: 8 ohms Two bar handles on each side
DISPERSION Omni-Directional/ or Cardioid (paired) 12”: 8 ohms 16 x M8 inserts for optional castors
CONNECTORS 2 x NL4 DISPERSION (-6dB) Cardioid
PIN CONNECTIONS (INPUT) 1+/- or 2+/- ENCLOSURE Multi-laminate birch ply DIMENSIONS (INCL SKIDS)
PIN CONNECTIONS (LINK) 1+/- and 2+/- FINISH Textured black paint (W) 500mm x (H) 552mm x (D) 810mm (938mm incl castors)
DIMENSIONS (W) 500mm, (H) 451mm, (D) 678mm (806mm with Casters) PROTECTIVE GRILLE Black HEX perforated steel (W) 19.69in x (H) 21.71in x (D) 31.90in (36.94in incl castors)
(W) 19.69ins, (H) 17.76ins, (D) 26.69ins (31.73ins with Casters) CONNECTORS 2 x NL4
WEIGHT 36.5kg (80.5lbs) PIN CONNECTIONS (INPUT) 15”: +1, -1; 12”: +2, -2 WEIGHT
PINS CONNECTIONS (LINK) 15”: +1, -1; 12”: +2, -2 61.5Kg (136lbs), 65Kg (143lbs) incl castors

SXC115 SX215
TYPE Compact, cardioid subwoofer
FREQUENCY RESPONSE (1) 44Hz – 150Hz ±3dB, -10dB @ 36Hz
DRIVERS 15” (380mm)/4” (100mm) voice coil, long excursion, TYPE Dual Driver, Direct radiating subwoofer
ferrite magnet, waterproof cone CROSSOVER FREQUENCY 100Hz
12” (300mm)/4” (100mm) voice coil, long excursion, FREQUENCY RESPONSE 4π (5) 45Hz - 100Hz ± 3dB, -10dB @ 36Hz
neodymium magnet, waterproof cone DRIVERS LF: 15” with 4” Voice coil, Ferrite Motor
RATED POWER (2) 15”: 1000W AES, 4000W peak SENSITIVITY (2W 1m half space) 106dB
12”: 800W AES, 3200W peak
SYSTEM AMPLIFIER iKON iK42 (1W 1m half space) 103dB
SENSITIVITY (10) 101dB
MAXIMUM SPL(9) 137dB peak NOMINAL IMPEDANCE 4 Ohms
NOMINAL IMPEDANCE 15”: 8 ohms, 12”: 8 ohms RATED POWER AES 2000W, PEAK 8000W
DISPERSION Cardioid MAXIMUM SPL (SYSTEM) 136dB continuous, 142dB peak
CONNECTOR 2 x NL4
PIN CONNECTIONS (INPUT) 15”: +1, -1; 12”: +2, -2
PIN CONNECTIONS (LINK) 15”: +1, -1; 12”: +2, -2 DISPERSION Omni-Directional/ or Cardioid (paired)
FITTINGS Two skids on base, with mating channels on top CONNECTORS 2 x NL4
M20 top-mounted thread plate for pole mounting PIN CONNECTIONS (INPUT) 1+/-
Two bar handles on each side, 16 x M10 mounting points PIN CONNECTIONS (LINK) 1+/- and 2+/-
16 x M8 inserts for optional castors DIMENSIONS (W) 961mm, (H) 463mm, (D) 679mm (807mm with Casters)
DIMENSIONS (INCL SKIDS) (W) 500mm x (H) 550mm x (D) 811mm (939mm incl castors) (W) 37.83ins, (H) 18.23ins, (D) 26.73ins (31.77ins with Casters)
(W) 19.69in x (H) 21.67in x (D) 31.92in (36.96in incl castors) WEIGHT 64kg (141lbs)
WEIGHT 53kg (117lbs), 56kg (124 lbs) incl castors

28 martin-audio.com/products/series/sx
 SUBWOOFERS : SX SERIES

SX118 SXCF118
TYPE Compact, direct radiating subwoofer TYPE Compact, cardioid subwoofer
FREQUENCY RESPONSE (1) 47Hz – 150Hz ±3dB, -10dB @ 41Hz FREQUENCY RESPONSE (1) 43Hz – 150Hz ±3dB, -10dB @ 34Hz
DRIVER 18” (460mm)/4” (100mm) voice coil, long excursion, DRIVERS 18” (460mm)/4” (100mm) voice coil, long excursion,
ferrite magnet, waterproof cone ferrite magnet, waterproof cone
SYSTEM AMPLIFIER iKON iK42, iK81 14” (356mm)/3.5” (88mm) voice coil, long excursion,
SENSITIVITY (10) 102dB neodymium magnet, waterproof cone
MAXIMUM SPL(9) 138dB peak RATED POWER (2) 18”: 1000W AES, 4000W peak
NOMINAL IMPEDANCE 8 ohms 14”: 800W AES, 3200W peak
CONNECTORS 2 x NL4 SYSTEM AMPLIFIER iKON iK42
FITTINGS Two skids on base, with mating channels on top SENSITIVITY (10) 104dB
16 x M8 inserts for optional castors MAXIMUM SPL(9) 140dB peak
M20 top-mounted thread plate for pole mounting NOMINAL IMPEDANCE 18”: 8 ohms, 14”: 8 ohms
16 x M10 mounting points DISPERSION Cardioid
2 x bar handles, 1 on each side ENCLOSURE Multi-laminate birch ply
4 x fittings for optional transit cover FINISH Textured black polyurea
DIMENSIONS (INCL SKIDS) (W) 600mm x (H) 509mm x (D) 632mm PROTECTIVE GRILLE Black HEX perforated steel
(760mm including castors) CONNECTOR 2 x NL4
(W) 24in x (H) 20.36in x (D) 25.26in PIN CONNECTIONS (INPUT) 18”: +1, -1; 14”: +2, -2
(30.38in including castors) PIN CONNECTIONS (LINK) 18”: +1, -1; 14”: +2, -2
WEIGHT 47kg (104lbs) with castors FITTINGS Two skids on base, with mating channels on top
M20 top-mounted thread plate for pole mounting
Two bar handles on each side
Four fittings for optional transit cover

SXC118 SXCF118 – FLYING VARIANT

ALSO AVAILABLE
DIMENSIONS (INCL SKIDS) (W) 650mm x (H) 611mm x (D) 812mm (940mm incl castors)
WEIGHT
(W) 25.6in x (H) 24.1in x (D) 32.0in (37.0in incl castors)
75kg (165lbs), 78kg (172 lbs) incl castors
TYPE Compact, cardioid subwoofer
FREQUENCY RESPONSE 43Hz – 150Hz ±3dB, -10dB @ 34Hz
DRIVERS 18” (460mm)/4” (100mm) voice coil, long
excursion, ferrite magnet, waterproof cone
14” (356mm)/3.5” (88mm) voice coil, long
excursion, neodymium magnet, waterproof cone
RATED POWER (2) 18”: 1000W AES, 4000W peak
14”: 800W AES, 3200W peak
SYSTEM AMPLIFIER iKON iK42
SENSITIVITY 104dB
MAXIMUM SPL 140dB peak
NOMINAL IMPEDANCE 18”: 8 ohms, 14”: 8 ohms
DISPERSION Cardioid
CONNECTOR 2 x NL4
FITTINGS Two skids on base, with mating channels on top
M20 top-mounted thread plate for pole mounting
Two bar handles on each side
Four fittings for optional transit cover
16 x M8 inserts for optional castors
DIMENSIONS (INCL SKIDS) (W) 635mm x (H) 603mm x (D) 824mm (952mm incl castors)
(W) 25in x (H) 23.7in x (D) 32.4in (37.5in incl castors)
WEIGHT 69kg (152lbs), 73kg (161lbs) incl castors

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/sx improvement, we reserve the right to alter these specifications without prior notice.
29
 SUBWOOFERS : SX SERIES

30 martin-audio.com/products/series/sx
 SUBWOOFERS : SX SERIES

SX218 SXP118
TYPE Compact, direct radiating powered subwoofer with
onboard DSP, networking & Dante
FREQUENCY RESPONSE 43Hz – 150Hz ±3dB, -10dB @ 38Hz
TYPE Dual-driver, direct radiating subwoofer DRIVER 18” (460mm)/4” (100mm) voice coil, long excursion,
FREQUENCY RESPONSE (1) 35Hz – 150Hz ±3dB, -10dB @ 30Hz ferrite magnet, waterproof cone
DRIVER 2 x 18” (460mm)/4” (100mm) voice coil, INPUT SENSITIVITY -30dBu for 100dB SPL
long excursion, ferrite magnet, waterproof cone MAXIMUM SPL 132dB continuous / 135dB peak
SYSTEM AMPLIFIER iKON iK42 DISPERSION Omnidirectional / or Cardioid (paired)
SENSITIVITY (10) 105dB AMPLIFIER TYPE 2 channel switch-mode, class D, Bridged Tied
MAXIMUM SPL(9) 144dB peak PEAK OUTPUT POWER 2000W total
NOMINAL IMPEDANCE 2 x 8 Ohms AC INPUT OPERATING RANGE 85 – 265V ~ AC, 50 - 60Hz
CONNECTORS 2 x NL4 FITTINGS Two skids on base, with mating channels on top
FITTINGS Two skids on base, with mating channels on top 16 x M8 inserts for optional castors
16 x M8 inserts for optional castors M20 top-mounted thread plate for pole mounting
24 x M10 mounting points 16 x M10 mounting points
4 x bar handles, 2 on each side 2x Bar handles, 1 on each side
4 x fittings for optional transit cover 4x fittings for optional transit cover
M20 pole mount insert Optional weather protection cowl
DIMENSIONS (INCL SKIDS) (W) 1093mm x (H) 537mm x (D) 792mm ACCESSORIES Transit Cover
(920mm including castors) DIMENSIONS (inc. castors) (W) 600mm x (H) 507mm x (D) 632mm (760mm)
(W) 43in x (H) 21.1in x (D) 31.2in (W) 23.62in x (H) 20in x (D) 24.86in (29.90in)
(36.2in including castors) WEIGHT 50kg (110lbs) excluding Transit cover
WEIGHT 102kg (225lbs) with castors

SXH218 SXP218
TYPE Hybrid® horn/reflex subwoofer TYPE Compact, direct radiating powered subwoofer with
FREQUENCY RESPONSE (1) 32Hz – 150Hz ±3dB, -10dB @ 27Hz onboard DSP, networking & Dante
DRIVERS 2 x 18” (460mm)/4.5” (115mm) voice coil, FREQUENCY RESPONSE 35Hz – 150Hz ±3dB, -10dB @ 30Hz
long excursion, neodymium magnet, waterproof cone DRIVER 18” (460mm)/4” (100mm) voice coil, long excursion,
RATED POWER (2) 3000W AES, 12000W peak ferrite magnet, waterproof cone
Recommended Amplifier iKON iK42 INPUT SENSITIVITY -30dBu for 100dB SPL
SENSITIVITY (10) 107dB MAXIMUM SPL 140dB continuous / 143dB peak
MAXIMUM SPL(9) 148dB peak (at 1m half space) DISPERSION Omnidirectional / or Cardioid (paired)
NOMINAL IMPEDANCE 4 Ohms AMPLIFIER TYPE Two 2 channel switch-mode, class D, Bridged Tied Load
DISPERSION (-6dB) Omnidirectional/or Cardioid (paired) PEAK OUTPUT POWER 4000W
ENCLOSURE Multi-laminate birch/poplar ply AC INPUT OPERATING RANGE 85 – 265V ~ AC, 50 - 60Hz
FINISH Textured Black Polyurea FITTINGS Two skids on base, with mating channels on top
PROTECTIVE GRILLE Black perforated steel 16 x M8 inserts for optional castors
CONNECTORS 2 x NL4 24 x M10 mounting points
PIN CONNECTIONS Input: +1/-1, refer to input panel for four-core cable link diagram 4x Bar handles, 2 on each side
FITTINGS Two skids on base, with mating channels on top 4x fittings for optional transit cover
Four rear-mounted 100mm (4in) castors Optional weather protection cowl
6 x bar handles, 3 on each side M20 pole mount insert
4 x fittings for optional transit cover ACCESSORIES Transit Cover
DIMENSIONS (INCL SKIDS) (W) 1112mm x (H) 609mm x (D) 1023mm (1151mm incl. castors) DIMENSIONS (inc. castors) (W) 1085mm x (H) 537mm x (D) 792mm (920mm)
(W) 43.8in x (H) 24in x (D) 40.3in (45.3in incl. castors) (W) 42.72in x (H) 20.87in x (D) 31.16in (36.20in)
WEIGHT 120kg (264lbs), with castors 124kg (273lbs) WEIGHT 105kg (231lbs) excluding Transit cover

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/sx improvement, we reserve the right to alter these specifications without prior notice.
31
 STAGE MONITORS : XE SERIES

XE Series
Musicians benefit from an onstage environment where they The patented Coaxial Differential Dispersion driver combined
sound great. Hearing their individual performance, as well as with a patent pending contour moulded static waveguide allows
the overall sound of the other musicians with clarity, dynamism the artist to stand directly over the monitor or further back,
and presence is essential to a confident performance that unites without significant changes in SPL or tonal balance. It produces
the band onstage. This is the realm of the stage monitor — the the optimal coverage pattern over a listening plane at head-
vital bridge between the artist and the audience. height and helps to contain the sound within that region.

Martin Audio brings engineering innovation to stage monitoring Designed as a complete system, the state of the art iKON
with the XE Series — setting a new reference in sonic 4 channel Class D amplifier maximises the capability of
excellence and defined coverage. Designed in consultation with the monitor while ensuring both engineer and artist can be
leading monitor engineers and combining sleek, low-profile confident they will experience the same high level of consistent
enclosures with unique CDD™ Coaxial Differential Dispersion performance from an XE monitor anywhere in the world.
technology, the XE300 and XE500 deliver perfect monitor
sound with a defined coverage pattern that allows the artist
freedom of movement, while reducing overlap with adjacent
monitors.

32 martin-audio.com/products/series/xe
 STAGE MONITORS : XE SERIES

XE500
TYPE Two-way, bi-amp, Coaxial Differential Dispersion
stage monitor
FREQUENCY RESPONSE (3) 62Hz-18kHz ± 3dB
-10dB @ 45Hz
DRIVERS LF: 15” (380mm)/3.5” (89mm) voice coil, dual-gap
neodymium motor system
HF: 1.4” (35mm) exit/3” (75mm) voice coil, titanium dome
compression driver
SYSTEM AMPLIFIER iKON® iK42
MAXIMUM SPL (9) 143dB peak
NOMINAL IMPEDANCE LF: 4 ohms, HF: 8ohms
DISPERSION (-6dB) 60-30° horizontal, 70° vertical
CONNECTORS 4 x NL4 type
FITTINGS 2 x bar handles
Protective rubber feet on base and sides
Built-in risers
4 x M8 inserts
DIMENSIONS INCL FEET (W) 641mm x (H) 367mm x (D) 583mm
(W) 25.2ins x (H) 14.4ins x (D) 22.9ins
WEIGHT 29kg (63.9lbs)

XE300

TYPE Two-way, bi-amp/passive, Coaxial Differential

Dispersion stage monitor
FREQUENCY RESPONSE (3) 67Hz-18kHz ± 3dB
-10dB @ 55Hz
DRIVERS LF: 12” (300mm)/3” (75mm) voice coil, dual-gap
neodymium motor system
HF: 1.4” (35mm) exit/3” (75mm) voice coil, titanium dome
compression driver
SYSTEM AMPLIFIER iKON® iK42
MAXIMUM SPL (9) Bi-amp: 140dB peak. Passive: 139dB peak
NOMINAL IMPEDANCE LF/FR: 6 ohms, HF: 8ohms
DISPERSION (-6dB) 60-30° horizontal, 90° vertical
CONNECTORS 4 x NL4 type
FITTINGS 2 x pocket handles
Protective rubber feet on base and sides
Built-in risers
4 x M8 inserts
DIMENSION INCL FEET (W) 556mm x (H) 293mm) x (D) 470mm
(W) 21.9ins x (H) 11.5ins x (D) 18.5ins
WEIGHT 19kg (41.9lbs)

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/xe improvement, we reserve the right to alter these specifications without prior notice.
33
 STAGE MONITORS : LE SERIES

LE Series
The stage monitor plays a key role in creating an onstage With extremely compact enclosures and unique CDD™ Coaxial
environment that connects performers to the audience. Martin Differential Dispersion technology, the LE Series monitors
Audio’s first LE monitor led the way to become the industry deliver cut-through sound with a coverage pattern that
standard in the early 1970s, and LE monitors have continued to allows performers greater freedom of movement compared to
make their presence felt in the decades since. Complementing conventional monitors. Instead of the typical ‘hot-spot’, they
Martin Audio’s state-of-the-art, high-performance XE Series produce a near-rectangular coverage pattern over a listening
monitors, the latest LE Series now brings engineering innovation plane at head-height — with a wide horizontal coverage close
to everyday stage monitoring — delivering exceptional to the monitor that reduces gradually as distance increases to
performance and controlled coverage at a price point not maintain consistent SPL and tonal balance.
previously possible for a truly professional monitor.
Professional and affordable, the latest LE Series puts great
Both the LE100 and the LE200 are designed for a wide range sound, optimised coverage and the very latest in innovative
of users and applications — from up-and-coming bands and monitor technology literally at your feet.
regional rental houses, to corporate AV events, HoW and fixed
installations.

34 martin-audio.com/products/series/le
 STAGE MONITORS : LE SERIES

LE200
TYPE Two-way, bi-amp/passive Coaxial Differential Dispersion
stage monitor
FREQUENCY RESPONSE (3) 68Hz-18kHz ± 3dB
-10dB @ 50Hz
DRIVERS LF: 15” (380mm)/3” (75mm) voice coil, long excursion,
shared ferrite motor system with HF
HF: 1.4” (32mm) exit/3” (75mm) voice coil, titanium dome
compression driver
RATED POWER (2) 400W AES, 1600W peak
RECOMMENDED AMPLIFIER MA3.0, MA5.0Q
SENSITIVITY (3) LF: 100dB, HF: 103dB
Passive: 100dB
MAXIMUM SPL (9) 133dB peak
NOMINAL IMPEDANCE LF/FR: 8 ohms, HF: 8 ohms
DISPERSION (-6dB) 100°-60° horizontal, 60° vertical
CONNECTORS 4 x NL4 type
FITTINGS 2 x bar handles
Protective rubber feet on base and sides
4 x M8 inserts
DIMENSIONS INCL FEET (W) 616mm x (H) 367mm x (D) 562mm
(W) 24.2ins x (H) 14.4ins x (D) 22.1ins
WEIGHT 26kg (57.3lbs)

LE100
TYPE Two-way passive, Coaxial Differential Dispersion
stage monitor
FREQUENCY RESPONSE (3) 78Hz-20kHz ± 3dB
-10dB @ 58Hz
DRIVERS LF: 12” (300mm)/2.5” (63.5mm) voice coil, long excursion,
shared ferrite motor system with HF
HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome
compression driver
RATED POWER (2) 300W AES, 1200W peak
RECOMMENDED AMPLIFIER MA2.0, MA3.0, MA5.0Q
SENSITIVITY (3) 97dB
MAXIMUM SPL (9) 129dB peak
NOMINAL IMPEDANCE 8 ohms
DISPERSION (-6dB) 110°-60° horizontal, 60° vertical
CONNECTORS 5 x NL4 type
FITTINGS 2 x pocket handles
Protective rubber feet on base and sides
4 x M8 inserts
Pole-mount socket
DIMENSIONS INCL FEET (W) 496mm x (H) 305mm x (D) 472mm
(W) 19.5ins x (H) 12.0ins x (D) 18.6ins
WEIGHT 18kg (39.7lbs)

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/le improvement, we reserve the right to alter these specifications without prior notice.
35
 SELF-POWERED POINT SOURCE : CDD-LIVE!

CDD-LIVE!
Until now, most self-powered portable loudspeakers have been
underpowered, light-duty systems or very high-end systems out of
reach of many users. Now, with the multi-purpose
CDD-LIVE! Series, Martin Audio brings everything rental companies,
systems integrators and musicians require from a self-powered
loudspeaker into sharp focus.

Comprising three full-range models and when complimented by SXP

subwoofers, CDD-LIVE! covers practically all professional stand-
alone and distributed applications — from sound reinforcement and
monitoring for live bands, DJ’s and corporate events, to installations
in dance clubs, ballrooms, theatres and performing arts centres.

Combining the ‘point-source’ benefits of coaxial designs with

the consistent coverage of Differential Dispersion technology,
CDD-LIVE! full-range systems project sound evenly front-to-back
while exhibiting wide horizontal coverage close to the speaker
— delivering ultimate fidelity and impact to all corners of the
audience.

Onboard Class D amplification, DSP and Dante™ Digital Audio

networking assure simplicity of stage set-up and efficient installation,
while tour-grade enclosures and comprehensive mounting options
— including pole mount, wall brackets, yokes and rigging inserts —
provide maximum flexibility in deployment.

With sonic consistency across the range, a rectangular coverage

footprint and a multitude of deployment options, CDD-LIVE! is truly
versatile — the professional self-powered solution that means business.

CDD-LIVE! ‘The Sound of Things to Come’

36 martin-audio.com/products/series/cdd-live
 SELF-POWERED POINT SOURCE : CDD-LIVE!

CDD-LIVE 8 CDD-LIVE 15
TYPE Ultra-compact, Coaxial Differential Dispersion powered t TYPE Ultra-compact, Coaxial Differential Dispersion powered
wo-way system with onboard DSP, networking & Dante two-way system with onboard DSP, networking & Dante
FREQUENCY RESPONSE 70Hz – 20kHz ±3dB, -10dB @ 50Hz FREQUENCY RESPONSE 55Hz – 20kHz ±3dB, -10dB @ 45Hz
DRIVER LF: 8” (200mm)/2” (50mm) voice coil, long excursion, DRIVER LF: 15” (380mm)/3” (75mm) voice coil, long excursion,
shared ferrite motor system with HF shared ferrite motor system with HF
HF: 1” (25mm) exit/1.4” (38mm) voice coil, polyimide HF: 1.4” (36mm) exit/3” (75mm) voice coil, titanium
dome compression driver dome compression driver
INPUT SENSITIVITY -26dBu for 100dB SPL INPUT SENSITIVITY -30dBu for 100dB SPL
MAXIMUM SPL 117dB continuous / 123dB peak MAXIMUM SPL 126dB continuous / 132dB peak
DISPERSION 110˚-80˚ horizontal, 60˚ vertical (user-rotatable) DISPERSION 100˚-60˚ horizontal, 60˚ vertical (user-rotatable)
AMPLIFIER TYPE 2 channel switch-mode, class D AMPLIFER TYPE 2 channel switch-mode, class D, Bridged Tied Load
PEAK OUTPUT POWER 1000W LF, 300W HF + 1 channel switch-mode, class D
AC INPUT OPERATING RANGE 85 – 265V ~ AC, 50 - 60Hz PEAK OUTPUT POWER 2000W LF, 500W HF
FITTINGS Top hat for pole mounting AC INPUT OPERATING RANGE 85 – 265V ~ AC, 50 - 60Hz
15 x M8 mounting points FITTINGS Top hat for pole mounting
Single pocket handle 15 x M8 mounting points
Optional weather protection cowl Two side pocket handles
ACCESSORIES Transit Cover. Optional wall, yoke and universal brackets Optional weather protection cowl
DIMENSIONS (W) 258mm x (H) 428mm x (D) 254mm ACCESSORIES Transit Cover. Optional wall, yoke and universal brackets
(W) 10.16in x (H) 16.85in x (D) 10.00in DIMENSIONS (W) 427mm x (H) 696mm x (D) 422mm
WEIGHT 14kg (30.8lbs) excluding Transit cover (W) 16.81in x (H) x 27.42in (D) 16.61in
WEIGHT 37kg (81.4lbs) excluding Transit cover

CDD-LIVE 12
TYPE Ultra-compact, Coaxial Differential Dispersion powered
two-way system with onboard DSP, networking & Dante
FREQUENCY RESPONSE 62Hz – 20kHz ±3dB, -10dB @ 50Hz
DRIVER LF: 12” (300mm)/2.5” (63.5mm) voice coil, long
excursion, shared ferrite motor system with HF
HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide
dome compression driver
INPUT SENSITIVITY -30dBu for 100dB SPL
MAXIMUM SPL 122dB continuous / 128dB peak
DISPERSION 110˚-60˚ horizontal, 60˚ vertical (user-rotatable)
AMPLIFIER TYPE 2 channel switch-mode, class D, Bridged Tied Load
+ 1 channel switch-mode, class D
PEAK OUTPUT POWER 2000W LF, 500W HF
AC INPUT OPERATING RANGE 85 – 265V ~ AC, 50 - 60Hz
FITTINGS Top hat for pole mounting
15 x M8 mounting points
Two side pocket handles
Optional weather protection cowl
ACCESSORIES Transit Cover. Optional wall, yoke and universal brackets
DIMENSIONS (W) 359mm x (H) 580mm x (D) 373mm
(W) 14.13in x (H) 22.83in x (D) 14.69in
WEIGHT 28kg (61.6lbs) excluding Transit cover

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/cdd-live improvement, we reserve the right to alter these specifications without prior notice.
37
 SELF-POWERED POINT SOURCE : BLACKLINEX POWERED

BlacklineX Powered
The new portable BlacklineX Powered Series integrates With optional Bluetooth control, streaming and a built-
all of our engineering expertise into easy-to-use, quick- in three channel mixer, BlacklineX Powered puts Martin
to-deploy, high-powered loudspeakers that bring Audio signature stadium sound at your fingertips.
professional quality sound, top-flight performance and
road-worthy durability into the hands of hard-working Comprising the XP12 and XP15 two-way systems and
industry professionals — from musicians, music bars and XP118 subwoofer, BlacklineX Powered incorporates
mobile DJ’s, to corporate AV, House of Worship installations the best-in-class performance, durability and reliability
and more. associated with Martin Audio professional systems in a
range of affordable, portable self-powered loudspeakers.

38 martin-audio.com/products/series/blacklinex-powered
 SELF-POWERED POINT SOURCE : BLACKLINEX POWERED

XP12 XP118
TYPE Compact self-powered two-way system TYPE Compact, direct radiating powered subwoofer
FREQUENCY RESPONSE 62Hz – 20kHz ±3dB FREQUENCY RESPONSE 42Hz –150Hz ±3dB
-10dB @ 50Hz -10dB @ 38Hz
DRIVERS LF: 12” (300mm)/2.5” (63.5mm) voice coil, ferrite motor system DRIVER 18” (460mm)/4” (100mm) voice coil, long excursion,
HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome ferrite magnet
compression driver MAXIMUM SPL 131dB continuous / 137dB peak (half space)
MAXIMUM SPL 122dB continuous, 128dB peak DISPERSION Omnidirectional
DISPERSION 80° H x 50° V (user-rotatable) CROSSOVER 100Hz, active
CROSSOVER 2.3kHz active, 24dB/octave AMPLIFIER TYPE Class D, Bridged Tied
AMPLIFIER TYPE 2 channel switch-mode, class D PEAK OUTPUT POWER 2000W total
PEAK OUTPUT POWER 1300W total AC INPUT OPERATING RANGE 100 – 240V ~ AC, 50 - 60Hz
1000W LF, 300W HF FITTINGS 16 x M10 inserts, pole-mount socket
Switch-mode, fixed frequency with PFC 2 x bar handles, provision for castors
AC INPUT OPERATING RANGE 100-240V ~ AC, 50 - 60Hz DIMENSIONS (W) 662mm x (H) 536mm x (D) 640mm
FITTINGS 17 x M8 inserts, pole-mount socket, 2 x pocket handles (W) 26.1in x (H) 21.1in x (D) 25.2in
DIMENSIONS (W) 358mm x (H) 574mm x (D) 318mm WEIGHT 44kg (97lbs)
(W) 14.1in x (H) 22.6in x (D) 12.5in
WEIGHT 18kg (40lbs)

XP15
TYPE High output, self-powered two-way system
FREQUENCY RESPONSE 55Hz – 20kHz ±3dB
-10dB @ 45Hz
DRIVERS LF: 15” (380mm)/3” (75mm) voice coil ferrite motor system
HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome
compression driver
MAXIMUM SPL 125dB continuous / 131dB peak
DISPERSION 80° H x 50° V (user-rotatable)
CROSSOVER 2kHz active, 24dB/octave
AMPLIFIER TYPE 2 channel switch-mode, Class D
PEAK OUTPUT POWER 1300W total
1000W LF, 300W HF
AC INPUT OPERATING RANGE 100-240V ~ AC, 50 - 60Hz
FITTINGS 13 x M8 inserts, pole-mount socket, 2 x pocket handles
DIMENSIONS (W) 427mm x (H) 690mm x (D) 407mm
W) 16.8in x (H) 27.2 x (D) 16.0in
WEIGHT 26kg (57lbs)

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/blacklinex-powered improvement, we reserve the right to alter these specifications without prior notice.
39
 PASSIVE POINT SOURCE : TH SERIES

TH Series
The TH Series consists of two, very high performance, all-
horn, three-way systems. Each is configured in a single wide-
bandwidth package with extended frequency response and very
high output capability.

Ideally suited to larger club applications and large scale

installs, the TH Series also aesthetically complements the CDD,
BlacklineX and SX subwoofer ranges.

Horn-loading the bass and midrange sections as well as the

high-frequency section maximises the efficiency of all bands,
resulting in exceptional impact and output from a single
enclosure. Bi-amp operation, with an internal passive network
for the mid/high crossover, ensures the most effective use of
available amplifier power.

Sonically, TH Series systems deliver the Martin Audio signature

sound of warmth, clarity and smooth response at high levels
with ease.

THH is a horizontally formatted system while THV is a vertically

formatted system.

40 martin-audio.com/products/series/th
 PASSIVE POINT SOURCE : TH SERIES

THV THH
TYPE Three-way bi-amp trapezoid Hybrid® fully horn loaded TYPE Three-way bi-amp trapezoid Hybrid®
FREQUENCY RESPONSE (5) 50Hz-18kHz ± 3dB fully horn loaded
DRIVERS 15” (380mm)/4” (100mm) coil bass driver FREQUENCY RESPONSE (5) 50Hz-18kHz ± 3dB
10” (250mm)/2.5” (63.5mm) coil mid driver DRIVERS 15” (380mm)/4” (100mm) coil bass driver
1” (25mm) exit HF compression driver 10” (250mm)/2.5” (63.5mm) coil mid driver
RATED POWER (2) LF: 750W AES, 3000W peak 1” (25mm) exit HF compression driver
MF + HF: 300W AES, 1200W peak RATED POWER (2) LF: 750W AES, 3000W peak
RECOMMENDED AMPLIFIER iK42 / VIA5002/5004 MF + HF: 300W AES, 1200W peak
SENSITIVITY (6) LF: 104dB, MF + HF: 104dB RECOMMENDED AMPLIFIER iK42 / VIA5002/5004
MAXIMUM SPL (9) 133dB continuous, 139dB peak SENSITIVITY (6) LF: 104dB, MF + HF: 104dB
NOMINAL IMPEDANCE LF: 8 ohms, MF + HF: 8 ohms MAXIMUM SPL (9) 133dB continuous, 139dB peak
DISPERSION (-6dB) 70˚ horizontal, 40˚ vertical NOMINAL IMPEDANCE LF: 8 ohms, MF + HF: 8 ohms
CROSSOVER 200Hz active, 2kHz passive DISPERSION (-6dB) 70˚ horizontal, 40˚ vertical
ENCLOSURE 250 litre, multi-laminate birch ply CROSSOVER 200Hz active, 2kHz passive
FINISH Textured black paint ENCLOSURE 250 litre, multi-laminate birch ply
PROTECTIVE GRILLE Black perforated steel FINISH Textured black paint
CONNECTORS 2 x Neutrik NL4 PROTECTIVE GRILLE Black perforated steel
PIN CONNECTIONS LF+,- : 1+,1-, (MF + HF) +,- : 2+,2- CONNECTORS 2 x Neutrik NL4
FITTINGS 12 x M10 inserts PIN CONNECTIONS LF+,- : 1+,1-, (MF + HF) +,- : 2+,2-
4 x 4” (100mm) castors, 4 x pocket handles FITTINGS 12 x M10 inserts, 4 x 4” (100mm) castors, 4 x pocket handles
DIMENSIONS (inc wheels) (W) 558mm x (H) 1067mm x (D) 780mm (908mm) DIMENSIONS (inc wheels) (W) 1067mm x (H) 558mm x (D) 780mm (908mm)
(W) 22ins x (H) 42ins x (D) 30.7ins (35.7ins) (W) 42ins x (H) 22ins x (D) 30.7ins (35.7ins)
WEIGHT 77.5kg (170.5lbs) WEIGHT 77.5kg (170.5lbs)

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/th improvement, we reserve the right to alter these specifications without prior notice.
41
 PASSIVE POINT SOURCE : FLEXPOINT SERIES

FlexPoint
With state-of-the-art acoustic design and technical innovations for installations and immersive environments. From the
throughout, the FlexPoint Series sets a new benchmark miniature FP4 to the powerful FP15, FlexPoint loudspeakers
in performance and versatility for compact, standalone are compact and discreet — providing ultimate clarity, detail
loudspeakers. FlexPoint systems deliver the very highest quality and coverage at all sound levels without affecting sight lines or
sound to match the expectations of prestige venues and top- detracting from venue architecture.
flight touring artists, while their passive two-way configuration
heeds the need to reduce running costs and amplifier count. FlexPoint systems are also designed to integrate perfectly with
Wavefont Precision and TORUS arrays where fill and delay
Comprising five models, the FlexPoint Series covers a vast range loudspeakers are required — ensuring the same superb sonic
of professional applications—from live sound reinforcement, characteristics and consistent coverage throughout the venue.
theatre sound and Corporate AV to distributed sound systems

42 martin-audio.com/products/series/flexpoint
 PASSIVE POINT SOURCE : FLEXPOINT SERIES

FP4 FP6
PRODUCT NAME FP4 PRODUCT NAME FP6
TYPE Coaxial passive 2-way TYPE Coaxial passive 2-way
CROSSOVER FREQUENCY 2.6kHz CROSSOVER FREQUENCY 2.3kHz
FREQUENCY RESPONSE - 4π (5) 142Hz - 18kHz ± 3dB, -10dB @103Hz with preset FREQUENCY RESPONSE - 4π (5) 73Hz - 20kHz ± 3dB, -10dB @57Hz with preset
DRIVERS LF: 4", 1.25" Voice coil, Ferrite Motor DRIVERS LF: 6", 1.75" Voice coil, Neodymium Motor with flux
HF: 0.7" exit, 1" Voice coil, Coaxial HT polymer dome stabilising rings
compression driver HF: 0.7" exit, 1.4" Voice coil, Coaxial HT polymer dome
SENSITIVITY (4V 1m free-field) 84dB compression driver
NOMINAL IMPEDANCE 16 Ohms SENSITIVITY (4V 1m free-field) 91dB
RATED POWER 60W AES, 240W peak NOMINAL IMPEDANCE 16 Ohms
MAXIMUM SPL 102dB Cont, 108dB Peak (6dB) RATED POWER 150W AES, 600W peak
DISPERSION (-6dB) 110° conical MAXIMUM SPL 113dB Cont, 119dB Peak (6dB)
CONNECTORS NL4MPXX speakons (pair), Pheonix terminal block 1725302 DISPERSION (-6dB) 100° H, 80° V
PIN CONNECTIONS (INPUT) 1+ / 1- CONNECTORS NLT4MPXX-BAG speakons (pair)
PIN CONNECTIONS (LINK) 1+/- and 2+/- PIN CONNECTIONS (INPUT) 1+ / 1-
FITTINGS 4 x M6 inserts, 1 x 3/8” (mic stand) fixing point PIN CONNECTIONS (LINK) 1+/- and 2+/-
DIMENSIONS (W) 130mm, (H) 130mm, (D) 126mm FITTINGS 4 x M10, 15 x M6 fixing points, 1 x 3/8” (mic stand)
(W) 5.1ins, (H) 5.1ins, (D) 5.0ins fixing point
WEIGHT 1.9kg (4.2lbs) DIMENSIONS (W) 321mm, (H) 220mm, (D) 197mm
(W) 12.6ins, (H) 8.7ins, (D) 7.8ins
WEIGHT 5.5kg (12.1lbs)

FP8
PRODUCT NAME FP8
TYPE Coaxial passive 2-way
CROSSOVER FREQUENCY 2.0kHz
FREQUENCY RESPONSE - 4π (5) 63Hz - 18kHz ± 3dB, -10dB @50Hz with preset
DRIVERS LF: 8", 2" Voice coil, Neodymium Motor with flux stabilising
rings
HF: 1" exit, 1.7" Voice coil, Coaxial HT polymer dome
compression driver
SENSITIVITY (2.83V 1m free-field) 94dB
NOMINAL IMPEDANCE 8 Ohms
RATED POWER 250W AES, 1000W peak
MAXIMUM SPL 118dB Cont, 124dB Peak (6dB)
DISPERSION (-6dB) 90° H, 70° V
CONNECTORS NLT4MPXX-BAG speakons (pair)
PIN CONNECTIONS (INPUT) 1+ / 1-
PIN CONNECTIONS (LINK) 1+/- and 2+/-
FITTINGS 4 x M10, 15 x M6 fixing points, dual pole-mount socket, 2
x handle pockets
DIMENSIONS (W) 376mm, (H) 280mm, (D) 265mm Captive release clamps Rotate driver through 90°
(W) 14.8ins, (H) 11.0ins, (D) 10.4ins
WEIGHT 9.3kg (20.5lbs)

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/flexpoint improvement, we reserve the right to alter these specifications without prior notice.
43
 PASSIVE POINT SOURCE : FLEXPOINT SERIES

FP12 FP15
PRODUCT NAME FP12 PRODUCT NAME FP15
TYPE Coaxial passive 2-way TYPE Coaxial passive 2-way
CROSSOVER FREQUENCY 1.5kHz CROSSOVER FREQUENCY 1.1kHz
FREQUENCY RESPONSE - 4π (5) 55Hz - 20kHz ± 3dB, -10dB @44Hz with preset FREQUENCY RESPONSE - 4π (5) 50Hz - 20kHz ± 3dB, -10dB @39Hz with preset
DRIVERS LF: 12", 3" Voice coil, Neodymium Motor with flux DRIVERS LF: 15", 3.5" Voice coil, Neodymium Motor with flux
stabilising rings stabilising rings
HF: 1.4" exit, 3" Voice coil, Coaxial titanium dome HF: 1.4" exit, 3" Voice coil, Coaxial titanium dome
compression driver compression driver
SENSITIVITY (2.83V 1m free-field) 97dB SENSITIVITY (2.83V 1m free-field) 99dB
NOMINAL IMPEDANCE 8 Ohms NOMINAL IMPEDANCE 8 Ohms
RATED POWER 350W AES, 1400W peak RATED POWER 500W AES, 2000W peak
MAXIMUM SPL 122dB Cont, 128dB Peak (6dB) MAXIMUM SPL 126dB Cont, 132dB Peak (6dB)
DISPERSION (-6dB) 90° H, 60° V DISPERSION (-6dB) 80° H, 50° V
CONNECTORS NLT4MPXX-BAG speakons (pair) CONNECTORS NLT4MPXX-BAG speakons (pair)
PIN CONNECTIONS (INPUT) 1+ / 1- PIN CONNECTIONS (INPUT) 1+ / 1-
PIN CONNECTIONS (LINK) 1+/- and 2+/- PIN CONNECTIONS (LINK) 1+/- and 2+/-
FITTINGS 4 x M10, 17 x M8 fixing points, dual pole-mount FITTINGS 4 x M10, 17 x M8 fixing points, dual pole-mount
socket, 2 x handle pockets socket, 2 x handle pockets
DIMENSIONS (W) 521mm, (H) 390mm, (D) 346mm DIMENSIONS (W) 601mm, (H) 460mm, (D) 420mm
(W) 20.5ins, (H) 15.4ins, (D) 13.6ins (W) 23.7ins, (H) 18.1ins, (D) 16.5ins
WEIGHT 17.5kg (38.6lbs) WEIGHT 27.4kg (60.4lbs)

44 martin-audio.com/products/series/flexpoint
 PASSIVE POINT SOURCE : FLEXPOINT SERIES

Flexible deployment options

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/flexpoint improvement, we reserve the right to alter these specifications without prior notice.
45
 PASSIVE POINT SOURCE : BLACKLINEX SERIES

BlacklineX Series
With BlacklineX, Martin Audio’s R&D team has engineered a Comprising four two-way systems — from the ultra-compact
classic suite of passive loudspeakers for the modern era. X8 to the powerful X15 — and three subwoofers, including an
unobtrusive slimline model, the multi-purpose BlacklineX Series
Delivering our signature sound of warmth, nuance and clarity raises the performance of loudspeaker systems in its class to a
at a price point not previously possible, BlacklineX is a clean, new level.
smart design with no-compromise between the needs of
installation and portability. Applications range from portable BlacklineX can also be supplemented with the Blackline+ high
sound reinforcement and stage monitoring for live bands, power performance loudspeakers and subwoofer, ideally suited
DJ’s and corporate events, to installations in nightclubs, bars, for thumping club performance and large scale installations.
commercial spaces and HoW [House of Worship].

46 martin-audio.com/products/series/blacklinex
 PASSIVE POINT SOURCE : BLACKLINEX SERIES

X8 X12
TYPE Ultra-compact, passive two-way system TYPE Compact, passive two-way system
FREQUENCY RESPONSE (5) 70Hz-20kHz ± 3dB FREQUENCY RESPONSE (5) 62Hz-20kHz ± 3dB
-10dB @ 60Hz -10dB @ 50Hz
DRIVERS LF: 8” (200mm)/2” (50mm) voice coil, DRIVERS LF: 12” (300mm)/2.5” (63.5mm) voice coil,
ferrite motor system ferrite motor system
HF: 1” (25mm) exit/1” (25mm) voice coil, polyester HF: 1” (25mm) exit/1.7” (44mm) voice coil,
dome compression driver polyimide dome compression driver
RATED POWER (2) 200W AES, 800W peak RATED POWER (2) 300W AES, 1200W peak
SENSITIVITY (8) 92dB SENSITIVITY (8) 97dB
MAXIMUM SPL (9) 115dB continuous, 121dB peak MAXIMUM SPL (9) 122dB continuous, 128dB peak
NOMINAL IMPEDANCE 8 ohms NOMINAL IMPEDANCE 8 ohms
DISPERSION (-6dB) 90° H x 50° V (user-rotatable) CONNECTORS 2 x NL4 type
CONNECTORS 2 x NL4 type FITTINGS 20 x M8 inserts, pole-mount socket, 1 x bar handle
FITTINGS 13 x M8, 6 x M6 inserts, pole-mount socket, DIMENSIONS (W) 358mm x (H) 574mm x (D) 337mm
1 x pocket handle (W) 14.1ins x (H) 22.6ins x (D) 13.7ins
DIMENSIONS (W) 257mm x (H) 422mm x (D) 243mm WEIGHT 17kg (37.5lbs)
(W) 10.1ins x (H) 16.6ins x (D) 9.6ins
WEIGHT 8kg (17.6lbs)

X10 X15

TYPE Compact, passive two-way system TYPE High-power, passive two-way system
FREQUENCY RESPONSE (5) 65Hz-20kHz ± 3dB FREQUENCY RESPONSE (5) 55Hz-20kHz ± 3dB
-10dB @ 55Hz -10dB @ 45Hz
DRIVERS LF: 10” (250mm)/2.5” (63.5mm) voice coil, DRIVERS LF: 15” (380mm)/3” (75mm) voice coil,
ferrite motor system ferrite motor system
HF: 1” (25mm) exit/1.4” (35mm) voice coil, HF: 1” (25mm) exit/1.7” (44mm) voice coil,
polyimide dome compression driver polyimide dome compression driver
RATED POWER (2) 250W AES, 1000W peak RATED POWER (2) 400W AES, 1600W peak
SENSITIVITY (8) 94dB SENSITIVITY (8) 99dB
MAXIMUM SPL (9) 118dB continuous, 124dB peak MAXIMUM SPL (9) 125dB continuous, 131dB peak
NOMINAL IMPEDANCE 8 ohms NOMINAL IMPEDANCE 8 ohms
CONNECTORS 2 x NL4 type CONNECTORS 2 x NL4 type
FITTINGS 19 x M8 inserts, pole-mount socket, 1 x bar handle FITTINGS 19 x M8 inserts, pole-mount socket, 2 x bar handles
DIMENSIONS (W) 324mm x (H) 522mm x (D) 289mm DIMENSIONS (W) 427mm x (H) 690mm x (D) 419mm
(W) 12.8ins x (H) 20.6ins x (D) 11.4ins (W) 16.8ins x (H) 27.2ins x (D) 16.5ins
WEIGHT 14kg (30.9lbs) WEIGHT 24kg (52.9lbs)

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/blacklinex improvement, we reserve the right to alter these specifications without prior notice.
47
 PASSIVE POINT SOURCE : BLACKLINEX SERIES

X115 X218

TYPE Dual-driver, direct radiating subwoofer

FREQUENCY RESPONSE (1) 42Hz-200Hz ± 3dB
-10dB @ 33Hz
TYPE Compact, direct radiating subwoofer DRIVER 18” (460mm)/4” (100mm) voice coil, long excursion,
FREQUENCY RESPONSE (1) 45Hz-150Hz ± 3dB ferrite magnet
-10dB @ 40Hz RATED POWER (2) 1600W AES, 6400W peak
DRIVER 15” (380mm)/3” (75mm) voice coil, long excursion, SENSITIVITY (10) 106dB
ferrite magnet MAXIMUM SPL (9) 141dB peak (half space)
RATED POWER (2) 500W AES, 2000W peak NOMINAL IMPEDANCE 4 ohms
SENSITIVITY (10) 102dB DISPERSION (-6dB) Omnidirectional
MAXIMUM SPL (9) 129dB continuous, 135dB peak (half space) CROSSOVER 80-120Hz active
NOMINAL IMPEDANCE 8 ohms CONNECTORS 2 x NL4 type
CONNECTORS 3 x NL4 type PIN CONNECTIONS (INPUT) 1+ 1- Link Through 2+ 2-
FITTINGS 16 x M10 inserts, pole-mount socket PIN CONNECTIONS (LINK) 1+ 1- Link Through 2+ 2-
2 x bar handles, provision for castors FITTINGS 12 x M10 inserts, pole-mount socket
DIMENSIONS (INCL FEET) (W) 465mm x (H) 590mm x (D) 565mm 2 x bar handles, 4 x pocket handles, provision for castors
(W) 18.3ins x (H) 23.2ins x (D) 22.2ins DIMENSIONS (INCL FEET) (W) 1049mm x (H) 587mm x (D) 727mm
WEIGHT 27kg (59.5lbs) (W) 41.3ins x (H) 23.1ins x (D) 28.6ins
WEIGHT 88kg (194lbs)

X118

TYPE Compact, direct radiating subwoofer

FREQUENCY RESPONSE (1) 42Hz-150Hz ± 3dB
-10dB @ 36Hz
DRIVER 18” (460mm)/4” (100mm) voice coil, long excursion,
ferrite magnet
RATED POWER (2) 800W AES, 3200W peak
SENSITIVITY (10) 104dB
MAXIMUM SPL (9) 130dB continuous, 136dB peak (half space)
NOMINAL IMPEDANCE 8 ohms
CONNECTORS 3 x NL4 type
FITTINGS 16 x M10 inserts, pole-mount socket
2 x bar handles, provision for castors
DIMENSIONS (INCL FEET) (W) 530mm x (H) 669mm x (D) 640mm
(W) 20.9ins x (H) 26.3ins x (D) 25.2ins
WEIGHT 42kg (92.6lbs)

48 martin-audio.com/products/series/blacklinex
 PASSIVE POINT SOURCE : BLACKLINEX SERIES

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/blacklinex improvement, we reserve the right to alter these specifications without prior notice.
49
 PASSIVE POINT SOURCE : CDD SERIES

CDD Series
Martin Audio brings engineering innovation to installed sound audience coverage than systems with X° x Y° horns — projecting
with the all-new CDD™ Series — combining distinctive curved more output to the rear of the audience to distribute sound
enclosures with unique Coaxial Differential Dispersion™ evenly front-to-back, while having wide horizontal coverage
technology to deliver class-leading performance, fidelity and close-up.
coverage consistency to venues that demand the ultimate in
cutting-edge technology and style. Visually-appealing enclosure design is a signature of the
CDD Series. The full-range enclosures can be used in either
Whether it’s a bar, an AV installation, a church or a prestige horizontal or vertical orientation, with rotation of the coaxial
nightclub — the CDD Series has it covered. CDD is the one- driver easily accomplished by removing the screw-free,
stop solution; six two-way full-range coaxial systems — from protective grille. The curved shape of each full-range enclosure
the micro CDD5 to the powerful CDD15, complemented by allows it to be discreetly mounted close to a wall and threaded
high-performance subwoofers — cover practically all install inserts are provided for eyebolt suspension of most models.
applications.
The CDD Series — the shape of things to come.
The CDD Series has the audience covered too. Coaxial
Differential Dispersion technology delivers more consistent

50 martin-audio.com/products/series/cdd
 PASSIVE POINT SOURCE : CDD SERIES

CDD5 CDD8

TYPE Ultra-compact, Coaxial Differential Dispersion passive TYPE Ultra-compact, Coaxial Differential Dispersion passive
two-way system two-way system
FREQUENCY RESPONSE (5) 100Hz-20kHz ± 3dB, -10dB @ 70Hz FREQUENCY RESPONSE (5) 70Hz-20kHz ± 3dB, -10dB @ 55Hz
COAXIAL DRIVER LF: 5.25” (130mm)/1.25” (32mm) voice coil, COAXIAL DRIVER LF: 8” (200mm)/2” (50mm) voice coil, long excursion,
long excursion, ferrite motor system shared ferrite motor system with HF
HF: 0.75” (19mm) voice coil, fabric dome with HF: 1” (25mm) exit/1.4” (38mm) voice coil,
neodymium motor system polymide dome compression driver
RATED POWER (2) 100W AES, 400W peak RATED POWER (2) 200W AES, 800W peak
SENSITIVITY (8) 90dB SENSITIVITY (8) 94dB
MAXIMUM SPL (9) 110dB continuous, 116dB peak MAXIMUM SPL (9) 117dB continuous, 123dB peak
NOMINAL IMPEDANCE 8 ohms NOMINAL IMPEDANCE 8 ohms
DISPERSION (-6dB) 120º-90º horizontal, 80º vertical (user-rotatable) DISPERSION (-6dB) 110º-80º horizontal, 60º vertical (user-rotatable)
CONNECTORS Low profile 13A push-lock CONNECTORS Low profile 13A push-lock
FITTINGS 6 x M5 inserts for wall/ceiling brackets FITTINGS 6 x M6 inserts for wall/ceiling brackets
DIMENSIONS (W) 160mm x (H) 230mm x (D) 149mm DIMENSIONS (W) 256mm x (H) 410mm x (D) 252mm
(W) 6.3ins x (H) 9.1 ins x (D) 5.9 ins (W) 10.1ins x (H) 16.1ins x (D) 9.9ins
WEIGHT 3kg (6.6lbs) WEIGHT 9.5kg (21lbs)
CDD5 is supplied with wall mount tilt/pan bracket

CDD6 CDD8-TX

TYPE Ultra-compact, Coaxial Differential Dispersion passive TYPE Ultra-compact, Coaxial Differential Dispersion passive
two-way system two-way system
FREQUENCY RESPONSE (5) 80Hz-20kHz ± 3dB, -10dB @ 70Hz FREQUENCY RESPONSE (5) 70Hz-20kHz ± 3dB, -10dB @ 55Hz
COAXIAL DRIVER LF: 6.5” (165mm)/1.5” (38mm) voice coil, COAXIAL DRIVER LF: 8” (200mm)/2” (50mm) voice coil, long excursion,
long excursion, ferrite motor system shared ferrite motor system with HF
HF: 1” (25mm) voice coil, fabric dome with HF: 1” (25mm) exit/1.4” (38mm) voice coil,
neodymium motor system polymide dome compression driver
RATED POWER (2) 150W AES, 600W peak RATED POWER (2) 200W AES, 800W peak
SENSITIVITY (8) 91dB TRANSFORMER SETTINGS 100V/70V line: 120W, 60W, 30W, 15W
MAXIMUM SPL (9) 113dB continuous, 119dB peak SENSITIVITY (8) 94dB
NOMINAL IMPEDANCE 8 ohms MAXIMUM SPL (9) 117dB continuous, 123dB peak
DISPERSION (-6dB) 110º-80º horizontal, 80º vertical (user-rotatable) NOMINAL IMPEDANCE 8 ohms
CONNECTORS Low profile 13A push-lock DISPERSION (-6dB) 110º-80º horizontal, 60º vertical (user-rotatable)
FITTINGS 4 x M6 inserts for wall/ceiling brackets CONNECTORS Low profile 13A push-lock
DIMENSIONS (W) 210mm x (H) 325mm x (D) 210mm FITTINGS 6 x M6 inserts for wall/ceiling brackets
(W) 8.3ins x (H) 12.8ins x (D) 8.3ins DIMENSIONS (W) 256mm x (H) 410mm x (D) 252mm
WEIGHT 5.5kg (12.1lbs) (W) 10.1ins x (H) 16.1ins x (D) 9.9ins
WEIGHT 11.1kg (24.53lbs)

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/cdd improvement, we reserve the right to alter these specifications without prior notice.
51
 PASSIVE POINT SOURCE : CDD SERIES

CDD10 CDD12

TYPE Compact, Coaxial Differential Dispersion passive TYPE Compact, high-output, Coaxial Differential Dispersion
two-way system passive two-way system
FREQUENCY RESPONSE (2) 65Hz-20kHz ± 3dB, -10dB @ 55Hz FREQUENCY RESPONSE (5) 62Hz-20kHz ± 3Db, -10dB @ 50Hz
COAXIAL DRIVER LF: 10” (250mm)/2.5” (63.5mm) voice coil, COAXIAL DRIVER LF: 12” (300mm)/2.5” (63.5mm) voice coil,
long excursion, shared ferrite motor system with HF long excursion, shared ferrite motor system with HF
HF: 1” (25mm) exit/1.4” (38mm) voice coil, HF: 1” (25mm) exit/1.7” (44mm) voice coil,
polymide dome compression driver polyimide dome compression driver
RATED POWER (2) 250W AES, 1000W peak RATED POWER (2) 300W AES, 1200W peak
SENSITIVITY (8) 96dB SENSITIVITY (8) 97dB
MAXIMUM SPL (9) 120dB continuous, 126dB peak MAXIMUM SPL (9) 122dB continuous, 128dB peak
NOMINAL IMPEDANCE 8 ohms NOMINAL IMPEDANCE 8 ohms
DISPERSION (-6dB) 110º-75º horizontal, 60º vertical (user-rotatable) DISPERSION (-6dB) 110º-60º horizontal, 60º vertical (user-rotatable)
CONNECTORS Low profile 20A push-lock CONNECTORS Low profile 20A push-lock
FITTINGS 6 x M8 inserts for wall/ceiling brackets, FITTINGS 6 x M8 inserts for wall/ceiling brackets,
10 x M8 fly points 10 x M8 fly points
DIMENSIONS (W) 323mm x (H) 513mm x (D) 310mm DIMENSIONS (W) 360mm x (H) 560mm x (D) 350mm
(W) 12.7ins x (H) 20.2ins x (D) 12.2ins (W) 14.2ins x (H) 22.05ins x (D) 13.8ins
WEIGHT 15.3kg (33.7lbs) WEIGHT 19kg (41.89lbs)

CDD10-TX CDD15

TYPE Compact, Coaxial Differential Dispersion passive

two-way system
FREQUENCY RESPONSE (2) 65Hz-20kHz ± 3dB, -10dB @ 55Hz TYPE High-output, Coaxial Differential Dispersion passive
COAXIAL DRIVER LF: 10” (250mm)/2.5” (63.5mm) voice coil, two-way system
long excursion, shared ferrite motor system with HF FREQUENCY RESPONSE (5) 55Hz-18kHz ± 3dB, -10dB @ 45Hz
HF: 1” (25mm) exit/1.4” (38mm) voice coil, COAXIAL DRIVER LF: 15” (380mm)/3” (75mm) voice coil, long excursion,
polymide dome compression driver shared ferrite motor system with HF
RATED POWER (2) 250W AES, 1000W peak HF: 1.4” (36mm) exit/3” (75mm) voice coil,
TRANSFORMER SETTINGS 100V/70V line: 120W, 60W, 30W, 15W titanium dome compression driver
SENSITIVITY (8) 96dB RATED POWER (2) 400W AES, 1600W peak
MAXIMUM SPL (9) 120dB continuous, 126dB peak SENSITIVITY (8) 100dB
NOMINAL IMPEDANCE 8 ohms MAXIMUM SPL (9) 126dB continuous, 132dB peak
DISPERSION (-6dB) 110º-75º horizontal, 60º vertical (user-rotatable) NOMINAL IMPEDANCE 8 ohms
CONNECTORS Low profile 20A push-lock DISPERSION (-6dB) 100º-60º horizontal, 60º vertical (user-rotatable)
FITTINGS 6 x M8 inserts for wall/ceiling brackets, CONNECTORS Low profile 20A push-lock
10 x M8 fly points FITTINGS 10 x M8 fly points
DIMENSIONS (W) 323mm x (H) 513mm x (D) 310mm DIMENSIONS (W) 432mm x (H) 685mm x (D) 413mm
(W) 12.7ins x (H) 20.2ins x (D) 12.2ins (W) 17.01ins x (H) 26.97ins x (D) 16.26ins
WEIGHT 16.9kg (37.23lbs) WEIGHT 26kg (57.32lbs)

52 martin-audio.com/products/series/cdd
 PASSIVE POINT SOURCE : CDD SERIES

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/cdd improvement, we reserve the right to alter these specifications without prior notice.
53
 PASSIVE POINT SOURCE : CDD SERIES - WEATHERISED

CDD Weatherised and

Marine Editions
The CDD Series in black or white is also available in weather-
resistant form. Like many systems on the market, CDD-WR
loudspeakers and CSX-WR subwoofers are designed for outdoor
operation where it will be subject to changing environmental
conditions, but sheltered from direct exposure to the elements.
Weatherised mounting brackets are also available.

CDD is also available to custom order as a Marine variant, ideally

suited to cruise ships and seaside resort applications. It takes
the weatherised cabinet and upgrades both the grille and all
metal work to stainless steel 316L.

CDD-Weatherised Hydrophobic
Waterproof Input Panel
Cover with Cable Gland
Cone Treatment
Declon® Layer

CDD-WR
Cabinet

Stainless Steel Fixings

Secondary Grille Assembly

- Zinc Plated Steel Grille
- Hydrophobic Mesh
CDD-WR Grille
- Rubber Edging Extrusion
- Zinc Plated Steel with Powder Coat Finish

54 martin-audio.com/products/series/cdd
 PASSIVE POINT SOURCE : CDD SERIES - WEATHERISED

CDD5TX-WR
WITH LINE TRANSFORMER
CDD8-WR
TYPE Ultra-compact, Coaxial Differential Dispersion passive TYPE Ultra-compact, Coaxial Differential Dispersion passive
two-way system two-way system
FREQUENCY RESPONSE (5) 100Hz-20kHz ± 3dB, -10dB @ 70Hz FREQUENCY RESPONSE (5) 70Hz-20kHz ± 3dB, -10dB @ 55Hz
COAXIAL DRIVER LF: 5.25” (130mm)/1.25” (32mm) voice coil, COAXIAL DRIVER LF: 8” (200mm)/2” (50mm) voice coil, long excursion,
long excursion, ferrite motor system shared ferrite motor system with HF
HF: 0.75” (19mm) voice coil, fabric dome with HF: 1” (25mm) exit/1.4” (38mm) voice coil,
neodymium motor system polymide dome compression driver
RATED POWER (2) 100W AES, 400W peak RATED POWER (2) 200W AES, 800W peak
SENSITIVITY (8) 90dB SENSITIVITY (8) 94dB
MAXIMUM SPL (9) 110dB continuous, 116dB peak MAXIMUM SPL (9) 117dB continuous, 123dB peak
NOMINAL IMPEDANCE 8 ohms NOMINAL IMPEDANCE 8 ohms
DISPERSION (-6dB) 120º-90º horizontal, 80º vertical (user-rotatable) DISPERSION (-6dB) 110º-80º horizontal, 60º vertical (user-rotatable)
PROTECTIVE GRILLE Zinc plated mild steel with powder coated finish and PROTECTIVE GRILLE Zinc plated mild steel with powder coated finish
weatherised backing and weatherised backing
ENVIRONMENTAL Rated at IP54 ENVIRONMENTAL Rated at IP54
CONNECTORS Low profile 13A push-lock, weatherproof input panel CONNECTORS Low profile 13A push-lock, weatherproof input
cover with dual cable glands panel cover with cable gland
FITTINGS 6 x M5 inserts for wall/ceiling brackets FITTINGS 6 x M6 inserts for wall/ceiling brackets
DIMENSIONS (W) 160mm x (H) 230mm x (D) 149mm DIMENSIONS (W) 256mm x (H) 410mm x (D) 252mm
(W) 6.3ins x (H) 9.1 ins x (D) 5.9 ins (W) 10.1ins x (H) 16.1ins x (D) 9.9ins
WEIGHT 3.4kg (7.5lbs) WEIGHT 9.8kg (21.6lbs)
CDD5 is supplied with wall mount tilt/pan bracket

CDD6TX-WR
WITH LINE TRANSFORMER
CDD8TX-WR
TYPE Ultra-compact, Coaxial Differential Dispersion passive
TYPE Ultra-compact, Coaxial Differential Dispersion passive two-way system
two-way system FREQUENCY RESPONSE (5) 70Hz-20kHz ± 3dB, -10dB @ 55Hz
FREQUENCY RESPONSE (5) 80Hz-20kHz ± 3dB, -10dB @ 70Hz COAXIAL DRIVER LF: 8” (200mm)/2” (50mm) voice coil, long excursion,
COAXIAL DRIVER LF: 6.5” (165mm)/1.5” (38mm) voice coil, shared ferrite motor system with HF
long excursion, ferrite motor system HF: 1” (25mm) exit/1.4” (38mm) voice coil,
HF: 1” (25mm) voice coil, fabric dome with polymide dome compression driver
neodymium motor system RATED POWER (2) 200W AES, 800W peak
RATED POWER (2) 150W AES, 600W peak TRANSFORMER SETTINGS 100V/70V line: 120W, 60W, 30W, 15W
SENSITIVITY (8) 91dB SENSITIVITY (8) 94dB
MAXIMUM SPL (9) 113dB continuous, 119dB peak MAXIMUM SPL (9) 117dB continuous, 123dB peak
NOMINAL IMPEDANCE 8 ohms NOMINAL IMPEDANCE 8 ohms
DISPERSION (-6dB) 110º-80º horizontal, 80º vertical (user-rotatable) DISPERSION (-6dB) 110º-80º horizontal, 60º vertical (user-rotatable)
PROTECTIVE GRILLE Zinc plated mild steel with powder coated finish and PROTECTIVE GRILLE Zinc plated mild steel with powder coated finish
weatherised backing and weatherised backing
ENVIRONMENTAL Rated at IP54 ENVIRONMENTAL Rated at IP54
CONNECTORS Low profile 13A push-lock, weatherproof input panel CONNECTORS Low profile 13A push-lock, weatherproof input
cover with dual cable glands panel cover with cable gland
FITTINGS 4 x M6 inserts for wall/ceiling brackets FITTINGS 6 x M6 inserts for wall/ceiling brackets
DIMENSIONS (W) 210mm x (H) 325mm x (D) 210mm DIMENSIONS (W) 256mm x (H) 410mm x (D) 252mm
(W) 8.3ins x (H) 12.8ins x (D) 8.3ins (W) 10.1ins x (H) 16.1ins x (D) 9.9ins
WEIGHT 6.5kg (14.3lbs) WEIGHT 11.4kg (25.13lbs)

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/cdd improvement, we reserve the right to alter these specifications without prior notice.
55
 PASSIVE POINT SOURCE : CDD SERIES - WEATHERISED

CDD10-WR CDD12-WR
TYPE Compact, Coaxial Differential Dispersion passive
two-way system TYPE Compact, high-output, Coaxial Differential Dispersion
FREQUENCY RESPONSE (2) 65Hz-20kHz ± 3dB, -10dB @ 55Hz passive two-way system
COAXIAL DRIVER LF: 10” (250mm)/2.5” (63.5mm) voice coil, FREQUENCY RESPONSE (5) 62Hz-20kHz ± 3Db, -10dB @ 50Hz
long excursion, shared ferrite motor system with HF COAXIAL DRIVER LF: 12” (300mm)/2.5” (63.5mm) voice coil,
HF: 1” (25mm) exit/1.4” (38mm) voice coil, long excursion, shared ferrite motor system with HF
polymide dome compression driver HF: 1” (25mm) exit/1.7” (44mm) voice coil,
RATED POWER (2) 250W AES, 1000W peak polyimide dome compression driver
SENSITIVITY (8) 96dB RATED POWER (2) 300W AES, 1200W peak
MAXIMUM SPL (9) 120dB continuous, 126dB peak SENSITIVITY (8) 97dB
NOMINAL IMPEDANCE 8 ohms MAXIMUM SPL (9) 122dB continuous, 128dB peak
DISPERSION (-6dB) 110º-75º horizontal, 60º vertical (user-rotatable) NOMINAL IMPEDANCE 8 ohms
PROTECTIVE GRILLE Zinc plated mild steel with powder coated finish DISPERSION (-6dB) 110º-60º horizontal, 60º vertical (user-rotatable)
and weatherised backing PROTECTIVE GRILLE Zinc plated mild steel with powder coated finish
ENVIRONMENTAL Rated at IP54 and weatherised backing
CONNECTORS Low profile 20A push-lock, weatherproof input ENVIRONMENTAL Rated at IP54
panel cover with cable gland CONNECTORS Low profile 20A push-lock, weatherproof input
FITTINGS 6 x M8 inserts for wall/ceiling brackets, panel cover with cable gland
10 x M8 fly points FITTINGS 6 x M8 inserts for wall/ceiling brackets,
DIMENSIONS (W) 323mm x (H) 513mm x (D) 310mm 10 x M8 fly points
(W) 12.7ins x (H) 20.2ins x (D) 12.2ins DIMENSIONS (W) 360mm x (H) 571mm x (D) 350mm
WEIGHT 15.5kg (34.2lbs) (W) 14.2ins x (H) 22.5ins x (D) 13.8ins
WEIGHT 19.8kg (43.65lbs)

CDD10TX-WR CDD15-WR
TYPE Compact, Coaxial Differential Dispersion passive
two-way system
FREQUENCY RESPONSE (2) 65Hz-20kHz ± 3dB, -10dB @ 55Hz TYPE High-output, Coaxial Differential Dispersion passive
COAXIAL DRIVER LF: 10” (250mm)/2.5” (63.5mm) voice coil, two-way system
long excursion, shared ferrite motor system with HF FREQUENCY RESPONSE (5) 55Hz-18kHz ± 3dB, -10dB @ 45Hz
HF: 1” (25mm) exit/1.4” (38mm) voice coil, COAXIAL DRIVER LF: 15” (380mm)/3” (75mm) voice coil, long excursion,
polymide dome compression driver shared ferrite motor system with HF
RATED POWER (2) 250W AES, 1000W peak HF: 1.4” (36mm) exit/3” (75mm) voice coil,
TRANSFORMER SETTINGS 100V/70V line: 120W, 60W, 30W, 15W titanium dome compression driver
SENSITIVITY (8) 96dB RATED POWER (2) 400W AES, 1600W peak
MAXIMUM SPL (9) 120dB continuous, 126dB peak SENSITIVITY (8) 100dB
NOMINAL IMPEDANCE 8 ohms MAXIMUM SPL (9) 126dB continuous, 132dB peak
DISPERSION (-6dB) 110º-75º horizontal, 60º vertical (user-rotatable) NOMINAL IMPEDANCE 8 ohms
PROTECTIVE GRILLE Zinc plated mild steel with powder coated finish DISPERSION (-6dB) 100º-60º horizontal, 60º vertical (user-rotatable)
and weatherised backing PROTECTIVE GRILLE Zinc plated mild steel with powder coated finish
ENVIRONMENTAL Rated at IP54 and weatherised backing
CONNECTORS Low profile 20A push-lock, weatherproof input ENVIRONMENTAL Rated at IP54
panel cover with cable gland CONNECTORS Low profile 20A push-lock, weatherproof input
FITTINGS 6 x M8 inserts for wall/ceiling brackets, panel cover with cable gland
10 x M8 fly points FITTINGS 10 x M8 fly points
DIMENSIONS (W) 323mm x (H) 513mm x (D) 310mm DIMENSIONS (W) 429mm x (H) 691mm x (D) 413mm
(W) 12.7ins x (H) 20.2ins x (D) 12.2ins (W) 16.9ins x (H) 27.2ins x (D) 16.3ins
WEIGHT 17.1kg (37.73lbs) WEIGHT 28.3kg (62.4lbs)

56 martin-audio.com/products/series/cdd
 PASSIVE POINT SOURCE : CDD SERIES - WEATHERISED

Lee Valley White Water Centre, UK

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/cdd improvement, we reserve the right to alter these specifications without prior notice.
57
 PASSIVE POINT SOURCE : ADORN SERIES

ADORN Series
Martin Audio ADORN on-wall and ceiling loudspeakers bring Low Impedance and Transformer Options
class-leading performance, reliability and cost competitiveness All models have a nominal impedance of 16 ohms, enabling
to a wide range of commercial sound installations — from retail four or more speakers to be driven in parallel by one amplifier
outlets, bars and restaurants to corporate offices. channel, thereby maximising efficiency and minimising cost.

Aesthetic Enclosures All ‘T’ designated models are fitted with an internal high-quality
ADORN full-range on-wall enclosures are visually unobtrusive 70V/100V multi-tap line transformer with a switch to select the
with smooth lines. Available in black or white as standard, output level.
they can be readily painted to match any interior décor and
architectural environment. Overload Protection
For full-bandwidth protection, the low and high-frequency
ADORN in-ceiling and pendant speakers feature a bezel-less sections are individually protected against overload in all
grille for a clean look and a bayonet fitting which is easy to models.
remove without the use of tools. The in-ceiling series is finished
in white and may also be painted to blend with any décor while
the pendant is also available in black as standard.

58 martin-audio.com/products/series/adorn
 PASSIVE POINT SOURCE : ADORN SERIES

A40 A55
TYPE Ultra-compact passive two-way system, TYPE Ultra-compact passive two-way system,
front ported bass reflex front ported bass reflex
FREQUENCY RESPONSE (1) 98Hz-17kHz ± 3dB FREQUENCY RESPONSE (1) 90Hz-17kHz ± 3dB
-10dB @ 70Hz -10dB @ 65Hz
DRIVERS LF: 4” /1” high-temp voice coil, coated paper cone, DRIVERS LF: 5.25” /1” high-temp voice coil, coated paper
rubber surround ferrite motor, pressed steel chassis cone, rubber surround, ferrite motor, pressed steel chassis
HF: 0.75” silk dome, neodymium motor HF: 0.75” silk dome, neodymium motor
RATED POWER (2) 40W AES, 160W peak RATED POWER (2) 50W AES, 200W peak
RECOMMENDED AMPLIFIER VIA2004 RECOMMENDED AMPLIFIER VIA2004
SENSITIVITY (1) 87dB/1W/1m SENSITIVITY (1) 90dB/1W/1m
MAXIMUM SPL (9) 109dB peak MAXIMUM SPL (9) 113dB peak
NOMINAL IMPEDANCE 16 ohms NOMINAL IMPEDANCE 16 ohms
DISPERSION (-6dB) 110° H x 80° V DISPERSION (-6dB) 110° H x 80° V
CROSSOVER 3.5kHz passive (LF and HF auto-resetting fuses) CROSSOVER 3.5kHz passive (LF and HF auto-resetting fuses)
RECOMMENDED HIGH-PASS FILTER 60Hz 24dB/oct RECOMMENDED HIGH-PASS FILTER 60Hz 24dB/oct
ENCLOSURE ABS, UL 94V-0 rated ENCLOSURE ABS, UL 94V-0 rated
FINISH Black or white FINISH Black or white
FITTINGS Wall bracket included FITTINGS Wall bracket included
DIMENSIONS EXCL. BRACKET (W) 124mm x (H) 200mm x (D) 114mm DIMENSIONS EXCL. BRACKET (W) 152mm x (H) 245mm x (D) 140mm
(W) 4.9in x (H) 7.9in x (D) 4.5in (W) 6in x (H) 9.6in x (D) 5.5in
WEIGHT 1.75kg (3.9lbs) WEIGHT 2.21kg (4.9lbs)

A40T A55T
TYPE Ultra-compact passive two-way system, TYPE Ultra-compact passive two-way system,
front ported bass reflex front ported bass reflex
FREQUENCY RESPONSE (1) 98Hz-17kHz ± 3dB FREQUENCY RESPONSE (1) 90Hz-17kHz ± 3dB
-10dB @ 70Hz -10dB @ 65Hz
DRIVERS LF: 4” /1” high-temp voice coil, coated paper cone, DRIVERS LF: 5.25” /1” high-temp voice coil, coated paper
rubber surround, ferrite motor, pressed steel chassis cone, rubber surround, ferrite motor, pressed steel chassis
HF: 0.75” silk dome, neodymium motor HF: 0.75” silk dome, neodymium motor
RATED POWER (2) 40W AES, 160W peak RATED POWER (2) 50W AES, 200W peak
RECOMMENDED AMPLIFIER VIA 5002 [In conjunction with suitable line transformer] RECOMMENDED AMPLIFIER VIA5002 [In conjunction with suitable line transformer]
SENSITIVITY (1) 87dB/1W/1m SENSITIVITY (1) 90dB/1W/1m
MAXIMUM SPL (9) 109dB peak MAXIMUM SPL (9) 113dB peak
NOMINAL IMPEDANCE 16 ohms NOMINAL IMPEDANCE 16 ohms
DISPERSION (-6dB) 110° H x 80° V DISPERSION (-6dB) 110° H x 80° V
CROSSOVER 3.5kHz passive (LF and HF auto-resetting fuses) CROSSOVER 3.5kHz passive (LF and HF auto-resetting fuses)
TRANSFORMER TAPS 70V: 20w / 10w / 5w / 2.5w TRANSFORMER TAPS 70V: 30w / 15w / 7.5w / 3.75w
100V: 20w / 10w / 5w 100V: 30w / 15w / 7.5w
RECOMMENDED HIGH-PASS FILTER 60Hz 24dB/oct RECOMMENDED HIGH-PASS FILTER 60Hz 24dB/oct
ENCLOSURE ABS, UL 94V-0 rated ENCLOSURE ABS, UL 94V-0 rated
FINISH Black or white FINISH Black or white
FITTINGS Wall bracket included FITTINGS Wall bracket included
DIMENSIONS EXCL. BRACKET (W) 124mm x (H) 200mm x (D) 114mm DIMENSIONS EXCL. BRACKET (W) 152mm x (H) 245mm x (D) 140mm
(W) 4.9in x (H) 7.9in x (D) 4.5in (W) 6in x (H) 9.6in x (D) 5.5in
WEIGHT 2.13kg (4.7lbs) WEIGHT 2.81kg (6.2lbs)

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/adorn improvement, we reserve the right to alter these specifications without prior notice.
59
 PASSIVE POINT SOURCE : ADORN SERIES

Atomic Beer Project, Australia

60 martin-audio.com/products/series/adorn
 PASSIVE POINT SOURCE : ADORN SERIES

ACS-40TS ACS-55T
TYPE Ultra-compact, passive two-way ceiling speaker, TYPE Compact, passive two-way ceiling speaker,
ported bass reflex ported bass reflex
FREQUENCY RESPONSE (1) 106Hz-20kHz ± 3dB, -10dB @ 73Hz FREQUENCY RESPONSE (1) 98Hz-20kHz ± 3dB, -10dB @ 62Hz
DRIVERS LF: 4” /1” high-temp voice coil, coated paper cone, DRIVERS LF: 5.25” /1” high-temp voice coil, coated paper cone,
rubber surround, ferrite motor, pressed steel chassis rubber surround, ferrite motor, pressed steel chassis
HF: 0.75” silk dome, neodymium motor HF: 0.75” silk dome, neodymium motor
RATED POWER (2) 40W AES, 160W peak RATED POWER (2) 50W AES, 200W peak
SENSITIVITY (4) 86dB / 1W(4V) / 1m SENSITIVITY (4) 90dB / 1W(4V) / 1m
MAXIMUM SPL (9) 108dB peak MAXIMUM SPL (9) 113dB peak
NOMINAL IMPEDANCE 16 ohms NOMINAL IMPEDANCE 16 ohms
DISPERSION (-6dB) 180° conical up to 10kHz DISPERSION (-6dB) 150° conical up to 7kHz
CROSSOVER 3.5 kHz passive (LF and HF auto-resetting fuses) CROSSOVER 3kHz passive (LF and HF auto-resetting fuses)
TRANSFORMER TAPS 70V: 20w / 10w / 5w / 2.5w, 100V: 20w / 10w / 5w TRANSFORMER TAPS 70V: 30w / 15w / 7.5w / 3.75w, 100V: 30w / 15w / 7.5w
RECOMMENDED HIGH-PASS FILTER 75Hz 24dB/oct RECOMMENDED HIGH-PASS FILTER 65Hz 24dB/oct
CONNECTORS Ceramic connector (in and link) located behind CONNECTORS Ceramic connector (in and link) located behind
fire-retardant steel cover fire-retardant steel cover
ACCESSORIES (included) 2 tile rails, C-ring backing plate, Cut-out template ACCESSORIES (included) 2 tile rails, C-ring backing plate, Cut-out template
DIMENSIONS (OD) 221mm x (D) 98mm DIMENSIONS (OD) 245mm x (D) 193mm
(OD) 8.7in x (D) 3.9in (OD) 9.7in x (D) 7.6in
WEIGHT 2.2kg (4.8lbs) WEIGHT 3kg (6.6lbs)

ACS-55TS ACP-55T

TYPE Compact, passive two-way ceiling speaker,

ported bass reflex
FREQUENCY RESPONSE (1) 117Hz-20kHz ± 3dB, -10dB @ 79Hz TYPE Passive two-way pendant speaker, ported bass reflex
DRIVERS LF: 5.25” /1” high-temp voice coil, coated paper cone, FREQUENCY RESPONSE (6) 98Hz-20kHz ± 3dB
rubber surround, ferrite motor, pressed steel chassis -10dB @ 56Hz
HF: 0.75” silk dome, neodymium motor DRIVERS LF: 5.25” /1” high-temp voice coil, coated paper cone,
RATED POWER (2) 50W AES, 200W peak rubber surround, ferrite motor, pressed steel chassis
SENSITIVITY (4) 90dB / 1W(4V) / 1m HF: 0.75” silk dome, neodymium motor
MAXIMUM SPL (9) 113dB peak RATED POWER (2) 50W AES, 200W peak
NOMINAL IMPEDANCE 16 ohms SENSITIVITY (7) 86dB / 1W(4V) / 1m (full space)
DISPERSION (-6dB) 150° conical up to 7kHz MAXIMUM SPL (9) 109dB Peak
CROSSOVER 3kHz passive (LF and HF auto-resetting fuses) NOMINAL IMPEDANCE 16 ohms
TRANSFORMER TAPS 70V: 30w / 15w / 7.5w / 3.75w, 100V: 30w / 15w / 7.5w DISPERSION (-6dB) 150° conical up to 7kHz
RECOMMENDED HIGH-PASS FILTER 65Hz 24dB/oct CROSSOVER 3kHz passive (LF and HF auto-resetting fuses)
CONNECTORS Ceramic connector (in and link) located behind TRANSFORMER TAPS 70V: 30w / 15w / 7.5w / 3.75w
fire-retardant steel cover 100V: 30w / 15w / 7.5w
ACCESSORIES (included) 2 tile rails, C-ring backing plate, Cut-out template CONNECTORS Ceramic connector (in and link)
DIMENSIONS (OD) 245mm x (D) 102mm DIMENSIONS (OD) 246mm x (D) 157 mm (175mm including grille)
(OD) 9.7in x (D) 4in (OD) 9.7in x (D) 6.2in (6.9in including grille)
WEIGHT 2.8kg (6.2lbs) WEIGHT 3.46kg (7.62lbs)

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/adorn improvement, we reserve the right to alter these specifications without prior notice.
61
 ELECTRONICS

Electronics
Top quality loudspeakers require top quality amplification
and control, and Martin Audio offer just that in the iKON
and VIA Series of high-performance, lightweight, power
amplifiers, and DX Controllers.

With Martin Audio’s enviable reputation for producing

loudspeakers with excellent performance and high durability
it is no surprise that our name appears on an equally
prestigious range of high quality amplifiers and controllers.

With models suited to both touring and installed audio

environments our electronic audio components supply the
uncompromising sonic performance and unquestionable
reliability required by the most demanding of today’s sound
reinforcement applications. Martin Audio Electronics –
completing the circuit.

Third Reformed Church, Iowa

62 martin-audio.com/products/series/electronics
 ELECTRONICS

iK81
TYPE Eight-channel Class D amplifier
TOTAL OUTPUT POWER 10,000 Watts RMS, all channels driven
DIGITAL SIGNAL PROCESSING 96kHz DSP on all inputs and outputs
COOLING Dual vari-speed fans, front-to-back airflow
MAXIMUM AMBIENT TEMPERATURE 40°C (104°F)
ANALOGUE IN/LINK (4 CHANNELS) 4 x female, 4 x male Neutrik™ XLR
ANALOGUE INPUT IMPEDANCE 20kΩ balanced to ground
MAXIMUM ANALOGUE INPUT LEVEL +20dBu
NOMINAL SYSTEM GAIN 32dB
AES3 IN/LINK (2 CHANNELS) 1 x female, 1 x male Neutrik™ XLR, balanced
DANTE™ (4 CHANNELS) 2 x shielded RJ45, primary and secondary
AMPLIFIER OUTPUTS 4 x Neutrik Speakon™ NL4
PROTOCOL Ethernet
CONTROL APPLICATION Martin Audio VU-NET™
TYPE High performance Series Resonant
AC INPUT OPERATING RANGE 85 – 240V ~ AC, 47 - 63Hz
MAINS INRUSH CURRENT 6A at 115V, 12A at 230V (max for <10ms)
MAINS CONNECTOR Neutrik 32A Powercon™
DIMENSIONS (W) 482 x (H) 2U/88mm x (D) 441mm
(W) 18.98in x (H) 2U/3.46in x (D) 17.35in
incl handles and optional rear support Discover Church, USA
WEIGHT 12.5kg (27.5lbs)

iK42
TYPE Four-channel Class D amplifier
TOTAL OUTPUT POWER 20,000 Watts RMS, all channels driven
DIGITAL SIGNAL PROCESSING 96kHz DSP on all inputs and outputs
COOLING Dual vari-speed fans, front-to-back airflow
MAXIMUM AMBIENT TEMPERATURE 40°C (104°F)
ANALOGUE IN/LINK (4 CHANNELS) 4 x female, 4 x male Neutrik™ XLR
ANALOGUE INPUT IMPEDANCE 20kΩ balanced to ground
MAXIMUM ANALOGUE INPUT LEVEL +20dBu
NOMINAL SYSTEM GAIN 32dB
AES3 IN/LINK (2 CHANNELS) 1 x female, 1 x male Neutrik™ XLR, balanced
DANTE™ (4 CHANNELS) 2 x shielded RJ45, primary and secondary
AMPLIFIER OUTPUTS 4 x Neutrik Speakon™ NL4
PROTOCOL Ethernet
CONTROL APPLICATION Martin Audio VU-NET™
TYPE High performance Series Resonant
AC INPUT OPERATING RANGE 85 – 240V ~ AC, 47 - 63Hz
MAINS INRUSH CURRENT 6A at 115V, 12A at 230V (max for <10ms)
MAINS CONNECTOR Neutrik 32A Powercon™
DIMENSIONS (W) 482 x (H) 2U/88mm x (D) 441mm
(W) 18.98in x (H) 2U/3.46in x (D) 17.35in
incl handles and optional rear support Pilton Party, UK
WEIGHT 12.5kg (27.5lbs)

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/electronics improvement, we reserve the right to alter these specifications without prior notice.
63
 ELECTRONICS

VIA2004 VIA2502

General General
TYPE Four-channel Class D amplifier TYPE Two-channel Class D amplifier
POWER OUTPUT** 4 x 500W into 4 ohms POWER OUTPUT** 2 x 1250W into 2 ohms
4 x 250W into 8 ohms 2 x 800W into 4 ohms
COOLING Vari-speed fans, front-to-back airflow 2 x 450W into 8 ohms
MAXIMUM AMBIENT TEMPERATURE 40°C (105°F) 1 x 2500W bridged into 4 ohms
Audio Inputs/Outputs COOLING Vari-speed fans, front-to-back airflow
ANALOGUE IN/LINK (4 CHANNELS) 4 x female, 4 x male Neutrik™ XLR MAXIMUM AMBIENT TEMPERATURE 40°C (105°F)
ANALOGUE INPUT IMPEDANCE 5 kΩ typical, balanced Audio Inputs/Outputs
MAXIMUM ANALOGUE INPUT LEVEL +20dBu ANALOGUE IN/LINK (4 CHANNELS) 2 x female, 2 x male Neutrik™ XLR
AMPLIFIER OUTPUTS 4 x Neutrik Speakon™ NL4 ANALOGUE INPUT IMPEDANCE 10kΩ Balanced
Audio Performance MAXIMUM ANALOGUE INPUT LEVEL +20dBu
FREQUENCY RESPONSE 20Hz - 20kHz +/- 0.45dB, 4 ohm load AMPLIFIER OUTPUTS 2 x Neutrik Speakon™ NL4
TOTAL HARMONIC DISTORTION 0.003% typical, 1kHz @ 1W Audio Performance
Power Supplies OUTPUT NOISE -113dBA, referenced to max output
TYPE 2 x high current, high frequency, switch-mode (22kHz bandwidth)
AC INPUT OPERATING RANGE 100-240V +/-10%, 45 - 65Hz FREQUENCY RESPONSE <10Hz - >20kHz +/- 0.25dB
MAINS CONNECTOR 1 x Neutrik Powercon™ TOTAL HARMONIC DISTORTION <0.05% typical @ 1kHz, -3dB output
TOTAL SYSTEM EFFICIENCY 89% (4 x 250W into 8 ohms) (22kHz bandwidth)
Physical SLEW RATE >80V per microsecond
DIMENSIONS (W) 482 x (H) 2U/88mm x (D) 441mm DAMPING FACTOR 120 ref 8 ohms
(W) 19in x (H) 2U/3.5in x (D) 17.4in Power Supply
incl handles and optional rear support TYPE High current, high frequency
WEIGHT 8kg (17.6lbs) switch-mode
AC INPUT OPERATING RANGE 100-240V +/-10%
45 - 65Hz
TOTAL SYSTEM EFFICIENCY >90% typical
MAINS CONNECTOR 1 x Neutrik Powercon™
Physical
DIMENSIONS (W) 482 x (H) 2U/88mm x (D) 441mm
(W) 19in x (H) 2U/3.5in x (D) 17.4in
incl handles and optional rear support
WEIGHT 8kg (17.6lbs)

64 martin-audio.com/products/series/electronics
 ELECTRONICS

VIA5002 VIA5004

General General
TYPE Two-channel Class D amplifier TYPE Four-channel Class D amplifier
POWER OUTPUT** 2 x 2500W into 4 ohms POWER OUTPUT** 4 x 1250W into 2 ohms
2 x 1600W into 8 ohms 4 x 800W into 4 ohms
COOLING Vari-speed fans, front-to-back airflow 4 x 450W into 8 ohms
MAXIMUM AMBIENT TEMPERATURE 40°C (105°F) 2 x 2500W bridged into 4 ohms
Audio Inputs/Outputs COOLING Vari-speed fans, front-to-back airflow
ANALOGUE IN/LINK (4 CHANNELS) 2 x female, 2 x male Neutrik™ XLR MAXIMUM AMBIENT TEMPERATURE 40°C (105°F)
ANALOGUE INPUT IMPEDANCE 10KΩ balanced Audio Inputs/Outputs
MAXIMUM ANALOGUE INPUT LEVEL +20dBu ANALOGUE IN/LINK (4 CHANNELS) 4 x female, 4 x male Neutrik™ XLR
AMPLIFIER OUTPUTS 2 x Neutrik Speakon™ NL4 ANALOGUE INPUT IMPEDANCE 10KΩ balanced
Audio Performance MAXIMUM ANALOGUE INPUT LEVEL +20dBu
OUTPUT NOISE -113dBA, referenced to max output AMPLIFIER OUTPUTS 4 x Neutrik Speakon™ NL4
(22kHz bandwidth) Audio Performance
FREQUENCY RESPONSE <10Hz - >20kHz +/- 0.25dB OUTPUT NOISE -113dBA, referenced to max output
TOTAL HARMONIC DISTORTION <0.05% typical @ 1kHz, -3dB output (22kHz bandwidth)
(22kHz bandwidth) FREQUENCY RESPONSE <10Hz - >20kHz +/- 0.25dB
SLEW RATE >80V per microsecond TOTAL HARMONIC DISTORTION <0.05% typical @ 1kHz, -3dB output
DAMPING FACTOR 120 ref 8 ohms (22kHz bandwidth)
Power Supplies SLEW RATE >80V per microsecond
TYPE 2 x high current, high frequency DAMPING FACTOR 120 ref 8 ohms
switch-mode Power Supplies
AC INPUT OPERATING RANGE 100-240V +/-10% TYPE 2 x high current, high frequency
45 - 65Hz switch-mode
TOTAL SYSTEM EFFICIENCY >90% typical AC INPUT OPERATING RANGE 100-240V +/-10%
MAINS CONNECTOR 1 x Neutrik Powercon™ 45 - 65Hz
Physical TOTAL SYSTEM EFFICIENCY >90% typical
DIMENSIONS (W) 482 x (H) 2U/88mm x (D) 441mm MAINS CONNECTOR 1 x Neutrik Powercon™
(W) 19in x (H) 2U/3.5in x (D) 17.4in Physical
incl handles and optional rear support DIMENSIONS (W) 482 x (H) 2U/88mm x (D) 441mm
WEIGHT 10kg (22lbs) (W) 19in x (H) 2U/3.5in x (D) 17.4in
incl handles and optional rear support
WEIGHT 10kg (22lbs)

** Continuous average power per channel, all channels driven with music program
material and a nominal ambient temperature of 40˚C /105˚F

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/electronics improvement, we reserve the right to alter these specifications without prior notice.
65
 ELECTRONICS

U-HUB DX4.0

General General
TYPE Ethernet to U-NET™ bridge TYPE 4 input/8 output digital loudspeaker processor
SUPPORTED PROTOCOLS Ethernet and U-NET™ OPERATING TEMPERATURE 0 to 45°C
CONTROL APPLICATION Martin Audio VU-NET™ HUMIDITY RANGE 0 to 80% RH (non-condensing)
AC OPERATING RANGE 100-240VAC Nominal, 50-60Hz Audio Performance
Rear Panel INPUT IMPEDANCE >10kΩ balanced
AUDIO INPUTS 1, 2 and 3 3 x 3 pin female XLR type OUTPUT IMPEDANCE <100Ω balanced
ETHERNET 1 x Neutrik® Ethercon MAX INPUT LEVEL +20dBu
MAINS POWER 3 pin IEC with cable locking mechanism MAX OUTPUT LEVEL +18dBu into 600Ω
FUSE User-replaceable 1A T-type 20mm FREQUENCY RESPONSE 10Hz - 40kHz
Front Panel INPUT DYNAMIC RANGE >120dBa typ.
AUDIO OUT AND U-NET 6 x ODU 8-pin connector ports OUTPUT DYNAMIC RANGE >118dBa typ.
Audio In 1, 2 ,3, Out on ports 1, 3, 5 TOTAL HARMONIC DISTORTION <0.008% typ. 20Hz-20kHz
UNET STATUS Bi-colour Green/Red LED on port 1 and 6 Digital Signal Processing
IP CONFIGURATION Yellow LED: On = Static IP, Off = Dynamic SAMPLE RATE 96kHz
IP RESET (TO DYNAMIC) Recessed push button AES3 INPUT SAMPLE RATE 28kHz – 108kHz
ETHERNET CONNECTION Green LED = Online AES3 OUTPUT SAMPLE RATE 96kHz
MAINS POWER Red LED = Mains power present Power Supply
Physical AC OPERATING RANGE 100-240V +/-10%
DIMENSIONS (W) 482mm x (H) 1U/44mm x (D) 268mm POWER CONSUMPTION 30W
(W) 19in x (H) 1U/1.75in x (D) 10.6in Control and Monitoring
WEIGHT 3.5Kg (7.7lbs) PROTOCOL Ethernet
CONTROL APPLICATION Martin Audio VU-NET™
Connectors
AUDIO INPUT 4 x 3 pin female XLR for analogue or AES3 pairs
AUDIO OUTPUT 8 x 3 pin male XLR for analogue or AES3 pairs
ETHERNET 1 x shielded RJ45
DANTE™ NETWORK 2 x shielded RJ45, primary and secondary
AUX PORT Phoenix connector for contact closure
MAINS POWER 3 pin IEC
Physical
DIMENSIONS (W) 482mm x (H) 1U/44mm x (D) 184mm
(W) 19in x (H) 1U/1.75in x (D) 7.2in
WEIGHT 2.7kg (6lbs)

66 martin-audio.com/products/series/electronics
 ELECTRONICS

DX0.6 DX0.4

General Processing General Processing

INPUT IMPEDANCE: 20k Ohm balanced SIGNAL GENERATOR: White/pink noise, -30dBu to +10dBu INPUT IMPEDANCE: 20k Ohm balanced SIGNAL GENERATOR: White/pink noise, -30dBu to +10dBu
OUTPUT IMP: 100R GAIN: -18dB to +12dB, step accuracy 0.1dB OUTPUT IMP: 100R GAIN: -18dB to +12dB, step accuracy 0.1dB
MAX INPUT LEVEL: +20dBu INPUT EQUALISER: 10 band PEQ, gain range +15dB MAX INPUT LEVEL: +20dBu INPUT EQUALISER: 10 band PEQ, gain range +15dB
MAX OUTPUT LEVEL: +18dBu 16 x Filter types MAX OUTPUT LEVEL: +18dBu 16 x Filter types
CROSSTALK: <-95dB INPUT GATE: Threshold: -40 to -80dBu CROSSTALK: <-95dB INPUT GATE: Threshold: -40 to -80dBu
SAMPLE RATE: 96kHz Attack: 1 to 1,000ms SAMPLE RATE: 96kHz Attack: 1 to 1,000ms
SIGNAL TO NOISE RATION >113dB (A weighted) Release: 1 to 1,000ms SIGNAL TO NOISE RATION >113dB (A weighted) Release: 1 to 1,000ms
NOISE FLOOR: <-94dB (A weighted) ROUTING: Freely assignable 2-in, 6 out NOISE FLOOR: <-94dB (A weighted) ROUTING: Freely assignable 2-in, 4 out
COMMON MODE REJECTION RATIO 60dB Up to 30dB attenuation on each node COMMON MODE REJECTION RATIO 60dB Up to 30dB attenuation on each node
FREQUENCY RESPONSE: 20Hz - 40kHz +0.3dB DELAY: Input: 600ms FREQUENCY RESPONSE: 20Hz - 40kHz +0.3dB DELAY: Input: 600ms
INPUT A/D DYNAMIC RANGE: 118dB Output: 200ms INPUT A/D DYNAMIC RANGE: 118dB Output: 200ms
OUTPUT D/A DYNAMIC RANGE: 118dB Steps: 20us, OUTPUT D/A DYNAMIC RANGE: 118dB Steps: 20us,
Units: milliseconds, metres, feet Units: milliseconds, metres, feet
THD (+4dBu 1kHz): <0.003% THD (+4dBu 1kHz): <0.003%
OUTPUT FILTERS: High & Low Pass, -6dB/Octave to -48dB/Octave OUTPUT FILTERS: High & Low Pass, -6dB/Octave to -48dB/Octave
MAINS VOLTAGE RANGE: 85-230VAC 50-60Hz Slope types: Butterworth, Bessel, Linkwitz MAINS VOLTAGE RANGE: 85-230VAC 50-60Hz Slope types: Butterworth, Bessel, Linkwitz Riley
NOMINAL POWER CONSUMPTION: 30W Riley NOMINAL POWER CONSUMPTION: 30W OUTPUT EQUALISATION: 8 band PEQ, gain +15dB
OUTPUT EQUALISATION: 8 band PEQ, gain +15dB 16 x filter types
Connectors 16 x filter types Connectors FIR Filter Import
AUDIO INPUT: 2 x 3 pin female XLR FIR Filter Import AUDIO INPUT: 2 x 3 pin female XLR PROGRAM LIMITER: Threshold: -10 to +20dBu
AUDIO OUTPUT: 6 x 3 pin male XLR PROGRAM LIMITER: Threshold: -10 to +20dBu AUDIO OUTPUT: 4 x 3 pin male XLR Attack: 1 to 1,000ms
ETHERNET: Shielded RJ45, Attack: 1 to 1,000ms ETHERNET: Shielded RJ45, Dynamic Release: 10 to 3,000ms
Dynamic or Static IP Release: 10 to 3,000ms or Static IP PEAK LIMITER: Threshold: 0 to 12dB above Program Limiter
RS485: 2 x RJ45 PEAK LIMITER: Threshold: 0 to 12dB above Program Limiter RS485: 2 x RJ45 Threshold
USB: 1 x USB B (Front Panel) Threshold USB: 1 x USB B (Front Panel) Release: Fast (91ms), Medium (350ms), Slow
MAINS: 3 pin IEC Release: Fast (91ms), Medium (350ms), MAINS: 3 pin IEC (800ms)
Slow (800ms)
Dimensions
Dimensions Height: 1U (44mm) [1.75”]
Height: 1U (44mm) [1.75”] Width: 482mm [19”]
Width: 482mm [19”] Depth: 230mm [9.1”]
Depth: 230mm [9.1”] Weight: 3.0kg [6.6lb]
Weight: 3.0kg [6.6lb]

Marquee Club, Sydney, Australia

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com/products/series/electronics improvement, we reserve the right to alter these specifications without prior notice.
67
 MARTIN AUDIO

68 martin-audio.com
 MARTIN AUDIO

All information is Copyright © 2023 Martin Audio Ltd. Due to Martin Audio’s policy of continuing
martin-audio.com improvement, we reserve the right to alter these specifications without prior notice.
71
UnitedKingdom USA
Telephone: +44 (0)1494 535312 Telephone: 323 381 5310
E-mail: [email protected]
Web: www.martin-audio.com

Martin Audio Ltd. Century Point, Halifax Road,

Cressex Business Park, High Wycombe,
Buckinghamshire HP12 3SL, England.

© 2023. Martin Audio Ltd. Ref: 18052023