Scribd Logo
Upload

Welcome to Scribd!

  • 57 views

    CREST 8002 Fiche Technique 1

    Uploaded by

    nilushanuwan19890731

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CREST 8002 Fiche Technique 1

    Uploaded by

    nilushanuwan19890731
    57 views2 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    57 views2 pages

    CREST 8002 Fiche Technique 1

    Uploaded by

    nilushanuwan19890731

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    8002 power amplifier

    description features
    The Pro II Series heralds a major advance in amplifier design .
    PowerLok technology
    from Crest Audio. Extreme reliability and hallmark sonic accu- .
    dramatically reduced net weight
    racy of the legendary Professional Series is maintained in the
    same rugged package—but at only half the weight. Such dra-
    .
    latest generation of high-speed, wide-bandwidth output devices
    matic weight savings are made possible by PowerLok, a radical .
    twin-tunnel cooling with back-to-front air flow
    new power-supply technology that provides significant perfor- .
    dual, rear-mounted, continuously-variable-speed fans
    mance and flexibility advances over conventional designs. .
    balanced male and female xlr inputs
    PowerLok is Crest Audio’s unique implementation of Power with switch-configurable xlr polarity and sensitivity selection
    Factor Correction, which allows current to be drawn .
    Speakon and five-way binding post output connectors
    throughout the entire cycle of the AC line-frequency, provid-
    ing maximum output power, while drawing significantly
    .
    stereo, parallel, bridged-mono: mode selector switch
    smaller peak currents from the AC line. .
    ground-lift switch
    Compared with an amplifier using a conventional power-sup- .
    front panel circuit-breaker switch
    ply, PowerLok requires less peak power to produce identical .
    recessed, stepped attenuators
    output power results—and because PowerLok’s current peaks
    are smaller, a Pro II amplifier can be serviced by a lower-rated
    .
    modular construction
    breaker than a conventional amplifier of similar wattage. .
    aluminum chassis
    .
    five-year warranty

    superior sound quality TourClass® protection circuits


    excellent low frequency and transient response acl active clip limiting prevents speaker damage by
    louder than conventional amplifiers providing gentle gain reduction at the clipping threshold.
    —maximum output level never dips
    constant, predictable performance igm instantaneous gain modulation monitors speaker loads to
    detect conditions that may overstress output devices, allowing safe
    consistent power output operation into nominal 2Ω speaker loads.
    accepts any line voltage worldwide—50 or 60Hz
    accepts long power cable runs with no loss of output power autoramp gradually increases gain to the attenuator level-
    settings when the amplifier is turned on.
    draws significantly less peak current
    lighter-duty power distribution components Other protection features include: short circuit, dc voltage,
    low line-voltage distortion comprehensive thermal management, current in-rush turn-
    minimal supply-ripple on/off transient, and sub/ultrasonic input.
    cost-effective
    extreme reliability
    reduced shipping costs—half the weight of conventional amplifiers

    power specifications 8Ω stereo 4Ω stereo 2Ω stereo 8Ω bridged 4Ω bridged


    1kHz, 0.01% THD+N 800w 1400w 2000w 2800w 4000w
    8002 20Hz-20kHz, 0.1% THD+N 750w 1350w 1900w 2700w 3800w
    Power figures are watts per channel, both channels driven.
    specifications 8002 power amplifier
    1kHz, 0.01% THD+N 20Hz–20kHz, 0.1% THD+N Architech’s specifications for this model
    and other product information is available
    stereo power 8Ω 800W 750W in downloadable PDF format
    at www.crestaudio.com
    4Ω 1400W 1350W
    2Ω 2000W 1900W Power figures are watts per channel,
    bridged mono power 8Ω 2800W 2700W both channels driven.
    4Ω 4000W 3800W
    ©¹⁹⁹⁸ crest audio inc.
    maximum output voltage 92V rms, 130V peak each channel Crest Audio reserves the right to make
    improvements in manufacturing or design
    which may affect specification.
    frequency response 1W @ 8Ω 20Hz–20kHz, +0 / -0.3dB, -3dB@135kHz
    power bandwidth rated power @ 4Ω, 1% THD+N 20Hz–20kHz, +0 / -0.23dB

    THD+N <0.05% rated power @ 4Ω, 1kHz


    SMPTE IMD <0.01% rated power @ 8Ω, 60Hz and 7kHz
    damping factor 400:1 10–400Hz @ 8Ω

    input CMRR >60dB @ 1kHz


    switch-configurable input options .775V constant sensitivity, x20 or x40 constant gain
    input impedance >20kΩ balanced, >10kΩ unbalanced
    hum and noise -110dB, A-weighted below rated power
    crosstalk > -80dB @ 1kHz below rated power

    class H
    Power supply two versions: 90–255 or 180–255 vac @ 50–60Hz factory configured
    PowerLok power supply with active power factor correction
    Circuit breaker rating 36A @ 120V
    Current draw 1/8 power, 4Ω <7.7A @120V
    1/3 power, 4Ω <17.3A @120V
    at idle <1.5A @120V
    Peak current draw 51A

    thermal emissions 1/8 Power, 4Ω 2083 BTU/Hr


    1/3 Power, 4Ω 3899 BTU/Hr
    cooling back-to-front via two rear-mounted variable-speed DC fans

    input connectors female and male xlr pin 2+ switch-configurable for pin 3+
    output connectors Speakon connectors and five-way output binding posts
    controls front panel: two attenuators, power switch incorporating magnetic circuit breaker
    rear panel: signal ground-lift, mode select, input sensitivity, pin 2/3+ switches
    LED indicators acl, signal, status bi-color: active / protect
    TourClass® protection acl, igm, autoramp, short circuit, dc voltage, turn-on/-off transient,
    current in-rush, sub/ultrasonic input
    construction aluminum chassis double thickness in rack-ear areas
    dimensions 5.25” x 19” x 18” 133 x 483 x 457mm height x width x depth
    weight gross: 47lbs 21.7kg
    net: 42lbs 19.1kg
    warranty five years USA, Canada, United Kingdom, and many other countries

    rear view 8002

    Crest Audio Inc.


    100 Eisenhower Dr., Paramus NJ 07652 USA
    TEL: 201.909.8700 FAX: 201.909.8744

    v. 2.1 *A4400059* 9/17/98 http://www.crestaudio.com

    You might also like