The Improving Mathematics Education in Schools (TIMES) Project NUMBER AND ALGEBRA

Module 9

MULTIPLICATION OF WHOLE NUMBERS
A guide for teachers - Years 4–7 June 2011

47
YEARS
Multiplication of Whole Numbers

(Number and Algebra : Module 9)

For teachers of Primary and Secondary Mathematics

510

Cover design, Layout design and Typesetting by Claire Ho

The Improving Mathematics Education in Schools (TIMES)

Project 2009‑2011 was funded by the Australian Government
Department of Education, Employment and Workplace
Relations.

The views expressed here are those of the author and do not
necessarily represent the views of the Australian Government
Department of Education, Employment and Workplace Relations.

© The University of Melbourne on behalf of the International

Centre of Excellence for Education in Mathematics (ICE‑EM),
the education division of the Australian Mathematical Sciences
Institute (AMSI), 2010 (except where otherwise indicated). This
work is licensed under the Creative Commons Attribution-
NonCommercial-NoDerivs 3.0 Unported License. 2011.

http://creativecommons.org/licenses/by-nc-nd/3.0/
 The Improving Mathematics Education in Schools (TIMES) Project NUMBER AND ALGEBRA
Module 9

MULTIPLICATION OF WHOLE NUMBERS
A guide for teachers - Years 4–7 June 2011

Peter Brown
Michael Evans
David Hunt
Janine McIntosh

47
Bill Pender
Jacqui Ramagge

YEARS
{4} A guide for teachers

MULTIPLICATION
OF WHOLE NUMBERS

ASSUMED KNOWLEDGE
• An understanding of place value as applied to whole numbers (see module on
Counting and Place Value).

• An appreciation that addition can be modelled by combining sets of objects, and can
also be modelled on a number line.

• An understanding of, and fluency with, skip-counting.

• An understanding of, and fluency with, addition of two single-digit numbers.
• Familiarity with the use of arrays to model multiplication.
• The use of the multiplication symbol to mean “groups of”.
• Knowledge of simple multiplication and division facts.

MOTIVATION
Examples of the use of multiplication include calculating the cost of six items
costing 25 cents each. It is much quicker to calculate 6 × 25 by multiplication
than by repeated addition.

Multiplication answers questions such as:

1 Judy bought 15 boxes of chocolates. Each box contained 24 chocolates. How many
chocolates did Judy have?

2 Henry has 16 rolls of wire. Each roll is 18 m long. What is the total length of wire that
Henry has?

The natural geometric model of multiplication as rectangular area leads to applications in

measurement. As such, multiplication provides an early link between arithmetic and geometry.

Fluency with multiplication reduces the cognitive stress in learning later topics such
as division. The development of a solid understanding of arithmetic is essential for all
further mathematics.
 The Improving Mathematics Education in Schools (TIMES) Project {5}

CONTENT

INTRODUCING MULTIPLICATION

For whole numbers, multiplication is equivalent to repeated addition.

Modelling multiplication by arrays

The use of arrays to model multiplication is essential. For example, 3 × 5 is illustrated by

We call 15 the product of 3 and 5, and we call 3 and 5 factors of 15.

By looking at the rows of the array we see that

3×5=5+5+5

By looking at the columns of the array we also see that

5×3=3+3+3+3+3

This illustrates 3 × 5 = 5 × 3. We say that multiplication is commutative.

{6} A guide for teachers

Modelling multiplication by skip-counting

Skip-counting, such as reciting 3, 6, 9, 12, 15,..., is one of the earliest introductions to

repeated addition and hence to multiplication. This can be illustrated on a number line as
shown for 3 × 5 = 15 below.

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

3 × 5 = 15

On the number line, the fact that 3 + 3 + 3 + 3 + 3 = 5 + 5 + 5 is not so obvious; the

above diagram shows 5 + 5 + 5, whereas 3 + 3 + 3 + 3 + 3 on a number line looks quite
different.

Skip-counting is important because it helps children learn their multiplication tables.

Modelling multiplication by area

Replacing objects in an array by unit or 1 × 1 squares introduces the area model of

multiplication. This is illustrated below for 3 × 5.

At this stage, we are using unit squares instead of counters or stars. We can also use the
area model of multiplication for multiplication of fractions.

LEARNING THE MULTIPLICATION TABLE

Fluency with multiplication tables is essential for further mathematics and in everyday life.

If students can add a single-digit number to a two-digit number, they can at least
reconstruct the multiplication table even if they have not yet developed fluency. It is
therefore essential to ensure that students can add fluently.

We strongly recommend that students learn their multiplication facts up to 12 × 12. This
is primarily because the 12 times table is essential for time calculations — there are 12
months in a year, 24 hours in a day, and 60 minutes in an hour. Familiarity with dozens is
useful in everyday life because packaging in 3 × 4 arrays is so much more convenient than
in 2 × 5 arrays. In addition, the 12 × 12 table has many patterns that can be constructively
exploited in pre-algebra exercises.

A straightforward approach to learning the tables is to recite each row, either by heart or
by skip-counting. However, students also need to be able to recall individual facts without
resorting to the entire table.
 The Improving Mathematics Education in Schools (TIMES) Project {7}

Looking at the 12 × 12 multiplication table gives the impression that there are 144 facts to
be learnt.

1 2 3 4 5 6 7 8 9 10 11 12
1 1 2 3 4 5 6 7 8 9 10 11 12
2 2 4 6 8 10 12 14 16 18 20 22 24
3 3 6 9 12 15 18 21 24 27 30 33 36
4 4 8 12 16 20 24 28 32 36 40 44 48

5 5 10 15 20 25 30 35 40 45 50 55 60
6 6 12 18 24 30 36 42 48 54 60 66 72
7 7 14 21 28 35 42 49 56 63 70 77 84
8 8 16 24 32 40 48 56 64 72 80 88 96
9 9 18 27 36 45 54 63 72 81 90 99 108
10 10 20 30 40 50 60 70 80 90 100 110 120
11 11 22 33 44 55 66 77 88 99 110 121 132
12 12 24 36 48 60 72 84 96 108 120 132 144

However, there are several techniques that can be used to reduce the number of facts to
be learnt.

• The commutativity of multiplication immediately reduces 144 to 78.

• The 1 and 10 times tables are straightforward and their mastery reduces the number
of facts to be learnt to 55.

1 2 3 4 5 6 7 8 9 10 11 12
1 1 2 3 4 5 6 7 8 9 10 11 12
2 2 4 6 8 10 12 14 16 18 20 22 24
3 3 6 9 12 15 18 21 24 27 30 33 36
4 4 8 12 16 20 24 28 32 36 40 44 48
5 5 10 15 20 25 30 35 40 45 50 55 60
6 6 12 18 24 30 36 42 48 54 60 66 72
7 7 14 21 28 35 42 49 56 63 70 77 84
8 8 16 24 32 40 48 56 64 72 80 88 96
9 9 18 27 36 45 54 63 72 81 90 99 108
10 10 20 30 40 50 60 70 80 90 100 110 120
11 11 22 33 44 55 66 77 88 99 110 121 132
12 12 24 36 48 60 72 84 96 108 120 132 144
{8} A guide for teachers

• The 2 and 5 times tables are also easy to learn and their mastery further reduces the
number of facts to be learnt to 36.

1 2 3 4 5 6 7 8 9 10 11 12
1 1 2 3 4 5 6 7 8 9 10 11 12
2 2 4 6 8 10 12 14 16 18 20 22 24
3 3 6 9 12 15 18 21 24 27 30 33 36
4 4 8 12 16 20 24 28 32 36 40 44 48
5 5 10 15 20 25 30 35 40 45 50 55 60
6 6 12 18 24 30 36 42 48 54 60 66 72
7 7 14 21 28 35 42 49 56 63 70 77 84
8 8 16 24 32 40 48 56 64 72 80 88 96
9 9 18 27 36 45 54 63 72 81 90 99 108
10 10 20 30 40 50 60 70 80 90 100 110 120
11 11 22 33 44 55 66 77 88 99 110 121 132
12 12 24 36 48 60 72 84 96 108 120 132 144

• The 9 and 11 times tables are the next easiest to skip-count because 9 and 11 differ
from 10 by 1. This reduces the number of facts to 21.

1 2 3 4 5 6 7 8 9 10 11 12
1 1 2 3 4 5 6 7 8 9 10 11 12
2 2 4 6 8 10 12 14 16 18 20 22 24
3 3 6 9 12 15 18 21 24 27 30 33 36
4 4 8 12 16 20 24 28 32 36 40 44 48
5 5 10 15 20 25 30 35 40 45 50 55 60
6 6 12 18 24 30 36 42 48 54 60 66 72
7 7 14 21 28 35 42 49 56 63 70 77 84
8 8 16 24 32 40 48 56 64 72 80 88 96
9 9 18 27 36 45 54 63 72 81 90 99 108
10 10 20 30 40 50 60 70 80 90 100 110 120
11 11 22 33 44 55 66 77 88 99 110 121 132
12 12 24 36 48 60 72 84 96 108 120 132 144

• The squares are useful and can be learnt just as one might learn a times table.

number, n 1 2 3 4 5 6 7 8 9 10 11 12
square, n × n 1 4 9 16 25 36 49 64 81 100 121 144
 The Improving Mathematics Education in Schools (TIMES) Project {9}

This reduces the number of terms to be learnt to 15.

1 2 3 4 5 6 7 8 9 10 11 12
1 1 2 3 4 5 6 7 8 9 10 11 12
2 2 4 6 8 10 12 14 16 18 20 22 24
3 3 6 9 12 15 18 21 24 27 30 33 36
4 4 8 12 16 20 24 28 32 36 40 44 48
5 5 10 15 20 25 30 35 40 45 50 55 60
6 6 12 18 24 30 36 42 48 54 60 66 72
7 7 14 21 28 35 42 49 56 63 70 77 84
8 8 16 24 32 40 48 56 64 72 80 88 96
9 9 18 27 36 45 54 63 72 81 90 99 108
10 10 20 30 40 50 60 70 80 90 100 110 120
11 11 22 33 44 55 66 77 88 99 110 121 132
12 12 24 36 48 60 72 84 96 108 120 132 144

Whatever techniques are used, the aim should be fluency.

PROPERTIES OF MULTIPLICATION

Commutativity

One of the advantages of the array and area approach is that properties of multiplication
are more apparent.

As discussed above, turning the 3 × 5 array on its side illustrates that 3 × 5 = 5 × 3

because the area does not change.

3×5=5×3

We saw this before by looking at the rows and columns separately, but we can also do
this by turning the rectangle on its side, that is, by rotation.
{10} A guide for teachers

3×5=5×3

Any-order property

Another important property of multiplication is associativity, which says that

a × (b × c) = (a × b) × c for all numbers.

Associativity of multiplication ensures that the expression a × b × c is unambiguous. We

usually don’t teach associativity of multiplication explicitly in years 4 -7. Instead, we teach
the any-order property of multiplication, which is a consequence of the commutative
and associative properties.

Any-order property of multiplication

A list of numbers can be multiplied together in any order to give the product of the numbers.

The any-order property of multiplication is analogous to the any-order property of

addition. Both associativity and commutativity are nontrivial observations; note that
subtraction and division are neither commutative nor associative. Once we are familiar
with the arithmetic operations we tend to take both associativity and commutativity of
multiplication for granted, just as we do for addition. Every so often, it is worth reflecting
that commutativity and associativity combine to give the important and powerful
any‑order properties.

Multiplying three whole numbers corresponds geometrically to calculating the number of

unit cubes in (or volume of) a rectangular prism. The any-order property of multiplication
means that we can calculate this volume by multiplying the lengths of the sides in any
order. The order of the calculation corresponds to slicing the volume up in different ways.

5×2=2×5 (5 × 2) × 3 = (2 × 5) × 3
 The Improving Mathematics Education in Schools (TIMES) Project {11}

3×2=2×3 (3 × 2) × 5 = (2 × 3) × 5

5×3=3×5 (5 × 3) × 2 = (3 × 5) × 2

Distributivity of multiplication over addition and subtraction.

The equation 3 × (2 + 4) = (3 × 2) + (3 × 4) is an example of the distributivity

of multiplication over addition. With arrays, this corresponds to the
following diagram.

With areas it corresponds to the diagram below.

2 4

3 3×2 3×4
Area = 3 × 6

Multiplication is also distributive over subtraction.

For example 7 × (10 − 2) = 7 × 10 − 7 × 2. This can be illustrated by the area model.
{12} A guide for teachers

MENTAL STRATEGIES

The any-order property of multiplication and the distributive law for multiplication allow
some multiplication problems to be completed without complicated calculations.

Using the any-order property

We use the any-order property of multiplication to simplify calculations by changing

the order in which we perform multiplications. For example,

1 2 × 2 × 2 × 5 × 5 × 5 = (2 × 5) × (2 × 5) × (2 × 5)
= 10 × 10 × 10

2 2 × 17 × 5 = 10 × 17

3 25 × 7 × 4 = 25 × 4 × 7 = 100 × 7.

Sometimes this reordering happens after we decompose one of the factors,

such as when we double twice in order to multiply by four, as in

17 × 4 = (17 × 2) × 2 = 34 × 2 = 68.

This technique of moving a factor from one number to another in order

to simplify a calculation has applications beyond repeated doubling, as in

36 × 5 = 18 × (2 × 5) = 180.

This is sometimes called “halve and double“.

EXERCISE 1
Use the any-order property to carry out the following multiplications.

a 5×7×2 b 68 × 5 c 25 × 11 × 4

Using the distributive property

We use both distributive properties to simplify some multiplication problems. For example,

7 × 101 = 7 × (100 + 1) = 700 + 7 = 707,

7 × 99 = 7 × (100 − 1) = 700 − 7 = 693,

7 × 102 = 7 × (100 + 2) = 700 + 14 = 714,

and

7 × 98 = 7 × (100 − 2) = 700 − 14 = 686.

 The Improving Mathematics Education in Schools (TIMES) Project {13}

Some examples of this nature can be used to develop concepts needed in the formal
algorithm. Observations such as 14 × 60 = 14 × 6 × 10 and 14 × 600 = 14 × 6 × 100 are
fundamental to the understanding of the multiplication algorithm.

Calculations such as

21 × 7 = 20 × 7 + 1 × 7 = 140 + 7 = 147

can be done first as a mental strategy, and then used as early examples in the formal
algorithm. Other mental strategies related to the algorithm include observations such as

200 × 81 = 2 × 81 × 100 = 162 × 100 = 16 200

where multiplying by single-digit multiples of powers of ten is really no more complicated

than multiplying by the single digit and keeping track of place value.

EXERCISE 2
Use the distributive law to carry out the following multiplications.

a 31 × 8 b 99 × 32 c 1001 × 34 d 102 × 8

EXERCISE 3
The identity (a – b)(a + b) = a2 – b2 is also useful for mental computation.

For example: 49 × 51 = (50 – 1) × (50 + 1) = 2500 – 1 = 2499

Carry out each of the following multiplications using this identity.

a 48 × 52 b 47 × 53 c 31 × 29 d 201 × 199

WRITTEN STRATEGIES

An algorithm works most efficiently if it uses a small number of steps that apply in
all situations. So algorithms do not resort to techniques, such as the use of near-doubles,
that are efficient for a few cases but useless in the majority of cases.

The standard algorithm will not help you to multiply two single-digit numbers. It is
essential that students are fluent with the multiplication of two single-digit numbers
before embarking on any formal algorithm.
{14} A guide for teachers

Standard algorithms

The distributive property is at the heart of our multiplication algorithm because it enables
us to calculate products one column at a time and then add the results together. It should
be reinforced arithmetically, geometrically and algorithmically. For example, arithmetically
we have 6 × 14 = 6 × 10 + 6 × 4, geometrically we see the same phenomenon,

10 4

6 6 × 10 6×4

and algorithmically we implement this in the following calculation.

1 4

× 6

2 4

+ 6 0

8 4

Once this process and layout is understood, we can proceed to the contracted algorithm.

Multiplying by a single digit

First we contract the calculation by keeping track of carry digits and incorporating the
addition as we go. The previous calculation shortens as either

12 4 1 4

× 6 or × 2
6

8 4 8 4

depending on where the carry digits are recorded.

 The Improving Mathematics Education in Schools (TIMES) Project {15}

Care should be taken even at this early stage because of the mixture of multiplication and
addition. Note also that the exact location and size of the carry digit is not essential to the
process and varies across cultures. When we do long multiplication, multiple carry digits
can arise in each column and recording them in the layout can be more of a hindrance
than a help. It is therefore desirable to develop a sufficient fluency in multiplying by a
single digit so that a student can perform a calculation such as

2 5 8 1 4

× 6

1 5 4 8 8 4

without needing to record the carry digits explicitly. If a student really needs to record the
carry digits, then we recommend placing them above the relevant column and crossing
them out as they are incorporated into the solution.

Multiplying by a single digit multiple of a power of ten

The next observation is that multiplying by a single-digit multiple of ten is no harder than
multiplying by a single digit provided we keep track of place value. So, to find the number
of seconds in 14 minutes we calculate

14 × 60 = 14 × 6 × 10 = 840

and implement it in a layout such as

1 4

× 6 0

8 4 0

Similarly, we can keep track of higher powers of ten by using place value to our
advantage. So

14 × 600 = 14 × 6 × 100 = 8400

becomes

1 4

× 6 0 0

8 4 0 0

For students who have met the underlying observation as part of their mental arithmetic
exercises the only novelty at this point is how to layout these calculations.
{16} A guide for teachers

Multiplying by a two-digit number

The next cognitive jump happens when we use distributivity to multiply two two-digit
numbers together. This is implemented as two products of the types mentioned above.
For example,

74 × 63 = 74 × (60 + 3) = 74 × 60 + 74 × 3

is used in the two-step calculation below.

7 4

× 6 3

2 2 2

+ 4 4 4 0

4 6 6 2

This corresponds to the area decomposition illustrated below.

60 3

74 74 × 60 74 × 3

63

In the early stages, it is worth concurrently developing the arithmetic, geometric and
algorithmic perspectives illustrated above.

Unpacking each line in a long multiplication calculation using distributivity explicitly,

as in

7 4

× 6 3

1 2

2 1 0

2 4 0

+ 4 2 0 0

4 6 6 2

This is 74 × 63 = (70 + 4)(60 + 3)

 The Improving Mathematics Education in Schools (TIMES) Project {17}

This also corresponds to the area decomposition

60 3

70 70 × 60 70 × 3

4 4 × 60 4×3

It is not efficient to do this extended long multiplication, but it can be used to highlight the
multiple use of distributivity in the process. The area model illustration used in this case
reappears later as a geometric interpretation of calculations in algebra.

Multiplying multiple-digit numbers

The more digits in the numbers we are multiplying, the more times we need to apply the
distributive property, and the more lines our calculation will have, as shown below.

5 9 7 4

× 1 2 6 3

1 7 9 2 2

3 5 8 4 4 0

1 1 9 4 8 0 0

+ 5 9 7 4 0 0 0

7 5 4 5 1 6 2

This example corresponds to: 5974 × 3 + 5974 × 60 + 5974 × 200 + 5974 × 1000

Beyond that, multiplication of whole numbers never really gets any more complicated.

LINKS FORWARD
The first application of multiplication that students are likely to meet is division. When
calculating a division, we are constantly calculating multiples of the divisor, and lack of
fluency with multiplication is a significant handicap in this process. The material in this
module lays the foundation for multiplication, and then division, of fractions and decimals.

Other applications of multiplication that are met early include percentages and consumer
arithmetic. For example, we calculate the price of an item inclusive of GST by calculating
1.1 times its pre-GST cost.

A familiarity with multiplication and the expression of numbers as products of factors

paves the way for one of the major theorems in mathematics.
{18} A guide for teachers

The Fundamental Theorem of Arithmetic: Every whole number bigger than 1 can be
written as a product of prime numbers and such an expression is unique up to the order
in which the factors are written. For example, 24 = 23 × 3 and 20 = 22 × 5.

The Fundamental Theorem of Arithmetic has far-reaching consequences and applications

in computer science, coding, and public-key cryptography.

Last, but not least, a strong grounding in arithmetic sets a student up for success in algebra.

Using the multiplication table as a source of patterns

The ability to identify patterns and to engage in open-ended problems are both critical
mathematical skills. The multiplication table can be used as a source of activities for both.

CLASSROOM ACTIVITY
Draw a 10 × 10 grid and highlight the multiples of 9 on it. What is the geometric pattern
the multiples of 9 make in the table and why does it arise? What is the arithmetic pattern
in the digits of the numbers in the 9 times table and why does it arise?

CLASSROOM ACTIVITY
Draw a 12 × 12 grid with the numbers 1 to 144 written on it. Pick an entry that is not on
the edge of the table. How are the numbers immediately above it and immediately below
it related to the number in the box you chose? How many things can you say about the
numbers to the left and right of the number you chose?

HISTORY
The product of two numbers is the same no matter how you calculate it or how you
write your answer. Just as the history of number is really all about the development of
numerals, the history of multiplication is mainly the history of the processes people have
used to perform calculations. The development of the Hindu-Arabic place-value notation
enabled the implementation of efficient algorithms for arithmetic and was probably the
main reason for the popularity and fast adoption of the notation.

EGYPTIAN DUPLATION

One technique that is quite different to the standard algorithm is Egyptian Duplation and
dates from before 1850 BC. It reduces calculations to a succession of doublings together
with a final addition.

Suppose you want to multiply 63 by 22. First write

1 63
 The Improving Mathematics Education in Schools (TIMES) Project {19}

then double both numbers and write them below to get

1 63
2 126
Continue doubling until the number in the left-hand column is as big as it can be without
being bigger than 22. So we write

1 63
2 126

4 252

8 504

16 1008

and stop because 32 is bigger than 22.

Now we work our way backwards and start by marking the 16; traditionally this was done
by placing a line to the left of the number, as illustrated below.

Adding 8 to 16 gives a number bigger than 22, so we don’t mark the row above.

Since 16 + 4 ≤ 22 we mark the row with 4 in the left-hand column.

Since 16 + 4 + 2 = 22 we mark the row with 2 in the left-hand column,

and since 16 + 4 + 2 + 1 > 22 we do not mark the top row. This leaves us with

1 63

/ 2 126

/ 4 252

8 504

/ 16 1008
Adding the numbers in the right column of the marked rows gives

1008 + 252 + 126 = 1386,

which is the product 22 × 63. This works because

22 × 63 = (16 + 4 + 2) × 63 = 1008 + 252 + 126 = 1386.

Egyptian duplation relies on distributivity and the fact that every number can be written as
a sum of powers of 2.

EXERCISE 4
Complete the following using Egyptian duplation.

a 34 × 56 b 57 × 34
{20} A guide for teachers

THE RUSSIAN PEASANT METHOD

Like Egyptian Duplation, the Russian Peasant Method works because every number has
a unique expression in base 2. The Russian Peasant Method reduces calculations to a
succession of doublings and halvings together with a final addition.

As an algorithm, Russian Peasant Method works as follows.

• Put the two numbers you want to multiply at the top of two columns.
• Produce another row of two numbers by doubling the number in the first column
and halving the number in the second column, ignoring any remainders in the
halving process.

• Repeat the previous step until the number in the halving column is 1.
• Cross out all rows in which the number in the halving column is even.
• Add all the numbers in the doubling column that have not been crossed out.
• This sum is equal to the product of the original two numbers. For example, in using it
to calculate 63 × 22 we write

63 22

126 11

252 5

504 2

1008 1

then calculate 126 + 252 + 1008 = 1386 and conclude that 63 × 22 = 1386.
This procedure always works, but why?

Suppose we want to multiply 63 by 16. We begin by writing 63 and 16 at the top of

two columns and below each we write the numbers we get by doubling one and
halving the other.

63 16

126 8

252 4

504 2

1008 1

In this case, the product of the two numbers in each row is identical to the product of
the numbers immediately above. For example, 126 × 8 = 63 × 16. By following the chain
of products we conclude that 63 × 16 = 1008 × 1 = 1008. This works particularly easily
because 16 is a power of 2.
 The Improving Mathematics Education in Schools (TIMES) Project {21}

Suppose instead we want to multiply 63 by 14.

63 14

126 7

252 3

504 1

Since there are no remainders in the first division, 126 × 7 = 63 × 14 and the first step
has been simply to restate the product in a different way. We can safely cross out 63 ×
14 and pretend it was never there to start with. However, at the second step we have
ignored a remainder and so there is a difference between the two rows; in particular,
126 × 7 = 252 × 3 + 126 × 1. Note that the difference between the product in the two
rows is 126, the number in the upper row in the doubling column. Since the remainder
on division by 2 can only ever be 0 or 1, at each step we are either restating the problem
exactly, or out by one copy of the number in the doubling column. In this calculation, we
have ignored one copy of 126 and one copy of 252 before arriving at our expression 504
× 1. So our original product, 63 × 14 must be equal to 504 + 252 + 126.

In general, there may be several rows in which we have no remainder and several rows
in which we are ignoring remainders. We cross out those rows for which the division by
2 resulted in an exact restatement of the product in the previous row; this corresponds
precisely to the rows that have even numbers in the halving column. The numbers that
have not been crossed out in the doubling column correspond to the remainders and
their sum is equal to the original product.
{22} A guide for teachers

ITALIAN OR LATTICE METHOD

Another technique, known as the Italian or lattice method is essentially an implementation

of the extended version of the standard algorithm but in a different layout. The method
is very old and might have been the one generally adopted if it had not been difficult to
print. It appears to have first appeared in India, but soon appeared in works by the Chinese
and by the Arabs. From the Arabs it found its way across to Italy and can be found in many
Italian manuscripts of the 14th and 15th centuries.

The multiplication 34 × 27 is illustrated here.

3 4

0 0
2
6 8

2 2
1
7
1 8
9

1 8

34 × 27 = 918

In the top right rectangle 4 × 2 is calculated. The digit 8 is placed in the bottom triangle
and 0 in the top triangle.

Then 3 × 2 is calculated and the result entered as shown.

In the bottom right rectangle 4 × 7 is calculated. The digit 8 is placed in the bottom
triangle and the digit 2 in the top triangle. The result of 3 × 7 is also recorded in this way.

The green diagonal contains the units.

The blue diagonal contains the tens.

The brown diagonal contains the hundreds.

The digits are now summed along each diagonal starting from the right and each
result recorded as shown. Note that there is a ‘carry’ from the ‘tens diagonal’ to the
‘hundreds diagonal’
 The Improving Mathematics Education in Schools (TIMES) Project {23}

EXERCISE 5
Use the lattice method to carry out each of the following multiplications

a 35 × 73 b 67 × 87 c 453 × 235

REFERENCES
A History of Mathematics: An Introduction, 3rd Edition, Victor J. Katz, Addison-Wesley, (2008)

History of Mathematics, D. E. Smith, Dover publications New York, (1958)

http://en.wikipedia.org/wiki/Ancient_Egyptian_multiplication

ANSWERS TO EXERCISES

EXERCISE 1
a 70 b 340 c 1100

EXERCISE 2
a 248 b 3168 c 34 034 d 816

EXERCISE 3
a 2496 b 2491 c 899 d 39 999

EXERCISE 4
a 1904 b 1938

EXERCISE 5
a 2555 b 5829 c 106 455
The aim of the International Centre of Excellence for
Education in Mathematics (ICE-EM) is to strengthen
education in the mathematical sciences at all levels-
from school to advanced research and contemporary
applications in industry and commerce.

ICE-EM is the education division of the Australian

Mathematical Sciences Institute, a consortium of
27 university mathematics departments, CSIRO
Mathematical and Information Sciences, the Australian
Bureau of Statistics, the Australian Mathematical Society
and the Australian Mathematics Trust.

The ICE-EM modules are part of The Improving

Mathematics Education in Schools (TIMES) Project.

The modules are organised under the strand

titles of the Australian Curriculum:

• Number and Algebra

• Measurement and Geometry
• Statistics and Probability

The modules are written for teachers. Each module

contains a discussion of a component of the
mathematics curriculum up to the end of Year 10.

www.amsi.org.au