Production 712906: Installation Outline Drawing, Fl500
Production 712906: Installation Outline Drawing, Fl500
Production 712906: Installation Outline Drawing, Fl500
REVISIONS
FL500 - - - - - - - -
ZONE REV CR DESCRIPTION BY DATE APPR APPR DATE
- 0 800000027815 PRODUCTION RELEASE WJE 12JUN18 BM 20JUN18
- 1 800000036319 UPDATED APPROVALS / FIRE TYPE FIELD SWR 28AUG19 SWR 28AUG19
Sensitivity Time Delay Housing Cable Entry - 2 800000039706 ALARM OUTPUT STANDARD CODE WAS 3 SWR 05MAR20 SWR 05MAR20
Alarm Output
1 4-20mA SOURCE CURRENT,RELAYS,SINGLE MODBUS,HART off
2 4-20mA SINK CURRENT,RELAYS,SINGLE MODBUS,HART off
3 3.5 mA HART,SOURCE CURRENT,RELAYS,SINGLE MODBUS
4 3.5 mA HART,SINK CURRENT,RELAYS,SINGLE MODBUS
5(Std)1.25 mA HART,SOURCE CURRENT,RELAYS,SINGLE MODBUS
6 1.25 mA HART,SINK CURRENT,RELAYS,SINGLE MODBUS
5.00
127
C C
2X #8-32 INTERNAL
CHASSIS GROUND
FAULT 2 ALARM
10
RESET
11 12 13 14
FAULT C NOT USED
9
FAULT 1 NOT USED
8
DATA - ALARM
7
TEST
DATA + ALARM HIGH 2
15 16 17 18 19 20
6
4.40 NOT USED ALARM HIGH 1
5
4.97 0-20mA ALARM HIGH C
4
112
126
+24 VDC ALARM LOW C
3
COM ALARM LOW 1
2
(24V-RETURN)
CHASSIS ALARM LOW 2
1
6.40 TB1 TB2
162
2X 3/4-14 NPT
(M25 ADAPTER OPTIONAL)
B B
LOCKING SCREW
(5 mm HEX DRIVE) #8-32 EXTERNAL THRU HOLE FOR TAG
CHASSIS GROUND
.39 The information and technical data disclosed by this document may be used and disseminated only for the purposes and to the extent
UNLESS OTHERWISE SPECIFIED
MOUNTING PIN 9.9 THIRD ANGLE PROJECTION specifically authorized by General Monitors, Inc. in writing. Such information and technical data are proprietary to General Monitors, Inc.
and may not be used or disseminated except as provided in the foregoing sentence.
DRAWN WJE 03MAY18
4.33
DIMENSIONS CHK'D. L.VLAGEA 02MAY18 LAKE FOREST, CA, USA
110 INCH[mm]
3. ENCLOSURE FINISH: ENGR. B.MONAHAN 02MAY18 GALWAY, IRELAND
- STAINLESS STEEL PASSIVATED, RED POLYESTER (TGIC) POWDER COAT
CUSTOMER _________________________ TITLE:
2. DETECTOR WEIGHT:
A
- STAINLESS STEEL ENCLOSURE: 9.4 lb [4.3 kg]
P.O. NO. _________________________ INSTALLATION OUTLINE A
GM NO. ___________________________ DRAWING, FL500
1. DIMENSIONS ARE FOR REFERENCE ONLY.
LOCATION _________________________ DRAWING NO.: LIFECYCLE STATE: REV:
NOTES: UNLESS OTHERWISE SPECIFIED TAG NO. __________________________
712906 Production 2
NEXT ASSY USED ON TOTAL NO. OF UNITS _______________
SCALE: NTS MODEL: FL500 SHEET 1 OF 2
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
WIRING 5.00
POSITION TB1 POSITION TB2 127 9.36
ALARM 238
10 FAULT 2 11
RESET
D 9 FAULT C 12 NOT USED D
8 FAULT 1 13 NOT USED
7 DATA- 14 ALARM
TEST
6 DATA+ 15 ALARM HIGH 2
5 NOT USED 16 ALARM HIGH 1
4 0-20 mA 17 ALARM HIGH C
3 +24VDC 18 ALARM LOW C
2 COM 19
(24V-RETURN ALARM LOW 1
6.40
1 CHASSIS 20 ALARM LOW 2 162
8.31
211
C C
2.01
51
17mm WRENCH/SOCKET
REQUIRED FOR TIGHTENING
4X .24
3.35 6
85
B B
712906 Production 2
SCALE: NTS MODEL: FL500 SHEET 2 OF 2
8 7 6 5 4 3 2 1