This document provides specifications for the 1650L Crawler Dozer XLT. It has a 6.7L, 6-cylinder engine that produces 144 horsepower. Features include a climate-controlled cab, hydraulic blade pitch adjustment, extra long tracks, and service capacities up to 300L for fuel. The operating weight is approximately 17,960 kg when equipped with extra long tracks.
This document provides specifications for the 1650L Crawler Dozer XLT. It has a 6.7L, 6-cylinder engine that produces 144 horsepower. Features include a climate-controlled cab, hydraulic blade pitch adjustment, extra long tracks, and service capacities up to 300L for fuel. The operating weight is approximately 17,960 kg when equipped with extra long tracks.
This document provides specifications for the 1650L Crawler Dozer XLT. It has a 6.7L, 6-cylinder engine that produces 144 horsepower. Features include a climate-controlled cab, hydraulic blade pitch adjustment, extra long tracks, and service capacities up to 300L for fuel. The operating weight is approximately 17,960 kg when equipped with extra long tracks.
This document provides specifications for the 1650L Crawler Dozer XLT. It has a 6.7L, 6-cylinder engine that produces 144 horsepower. Features include a climate-controlled cab, hydraulic blade pitch adjustment, extra long tracks, and service capacities up to 300L for fuel. The operating weight is approximately 17,960 kg when equipped with extra long tracks.
Side-to-side 45° Max pressure 207 bar Fore and aft 45° OPERATING WEIGHT Lift cylinder PAT nr.2 Radiator Unit equipped with a compartment, full fuel tank, 77 kg (170 lb) Bore diameter 88.9 mm operator, frontal traction hook, track protection PAT blade, rear Core size area 0.61 m2 Rows of tubes 4 Rod diameter 50.8 mm drawbar pull. Fan Stroke 826 mm Diameter 660 mm Angle cylinder PAT nr.2 WEIGHT (KG) Propeller Belt mechanical drive Extra Long Tracks (XLT) 17960 kg Bore diameter 101.6 mm ADD-ON WEIGHTS WEIGHT (KG) Rod diameter 50.8 mm TRANSMISSION COOLING Stroke 508 mm Drawbar 66 kg Type Heat exchange Tilt cylinder PAT nr.1 Ripper 1600 kg Core size 0.54 m 2
Bore diameter 127 mm Roller protection 242.2 kg
mm Rod diameter 63.5
ELECTRICAL SYSTEM Stroke 135 mm
Alternator 65 amps
Batteries(2) 2x 12 V in series, maintenance free. 750 A CCA at -18°C
1650L | Page 1 UNDERCARRIAGE BLADE SERVICE CAPACITY Track adjustment Grease injection Variable blade pitch - adjustable 55° to 60° Fuel Tank 300 L Frame Two-tier chassis, Lift speed - per second 483 mm Engine oil w/ filter 16.4 L manufactured in structural steel Cutting edge Reversible, replaceable Engine oil w/o filter 15.6 L Track link pitch 190 mm - Width 200 mm Engine cooling system 25.5 L Track shoe height 56 mm - Lenght 2352 mm Hydraulic reservoir 98.4 L Pin diameter 38.5 mm - Thickness 20 mm Final drive - per side 14.2 L Bushing diameter 65 mm Track rollers - each 0.275 L Track shoes per side 45 Front idlers - each 0.225 L Track rollers per side 8 RIPPER Carrier rollers - each 0.334 L Carrier rollers per side 2 Max. penetration 478 mm Track roller rail diameter 203 mm Widh 1985 mm Cut width 1942 mm
Max. ground clearance 262 mm
Max. number of shanks 3 TRACK ON GROUND Tooth spacing w/3 teeth 940 mm Shoe width 559 mm Hydraulic cylinder Double-acting Tracks on ground 34093 cm2 Diameter 102 mm Stroke 254 mm Rod 51 mm
GENERAL DIMENSIONS
J H K G E
B C
I D’ Line drawings are for illustrative purpose only D and may not be exact representation of unit.
A. Blade height 1183 mm I. Blade angle of attack 25.7° B. Depth of the blade in the ground 490 mm J. Height of the exhaust 2884 mm C. Length of the track on the ground 3050 mm K. Track Gauge 1880 mm D. Length of the blade in the straight position and ripper 6637 mm Width of the shoe 559 mm D’ - With blade in the straight position and draw bar 5482 mm Area of the track on the ground 34093 cm2 E. Height to top of cab 3057 mm Pressure on the ground 0.47 kgf/cm2 F. Ground clearance 347 mm SAE blade capacity 3.5 m3 G. Width to the ends of the tracks 2438 mm Elevation of the blade over the ground 950 mm H. Width of the blade at a maximum angle 2810 mm Blade oscillation (up to 8.3°) 450 mm Width of the blade fully placed on the ground 3175 mm NOTE: Ground clearance and overall height dimensions are with the grousers fully penetrated. Add 52.5 mm if unit is on solid surface.
NOTE: CASE provides specific outfits for various countries and many optional fittings (OPT). The illustrations on this or other leaflets may relate to standard or optional fittings. Please consult your CASE dealer for any information in this regard and any possible updating on components. CNH Industrial reserves the right to modify machine specifications without incurring any obliga- tion relating to such changes.
CaseCe.com EXPERTS FOR THE REAL WORLD SINCE 1842 1650L | Page 2
