Scribd
Upload
101 views

Computer Network

This document discusses network models and the layers of the Internet model. It provides explanations of each layer - physical, data link, network, transport, and application layers. It also describes the responsibilities and functions of each layer, such as how the physical layer is responsible for transmitting bits over a medium and the application layer supports the user. The document then provides practice questions related to defining the layers and their roles in delivering and processing information across a network.

Uploaded by

ياسين خالد
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
101 views

Computer Network

This document discusses network models and the layers of the Internet model. It provides explanations of each layer - physical, data link, network, transport, and application layers. It also describes the responsibilities and functions of each layer, such as how the physical layer is responsible for transmitting bits over a medium and the application layer supports the user. The document then provides practice questions related to defining the layers and their roles in delivering and processing information across a network.

Uploaded by

ياسين خالد
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Computer Network – Chapter 2 – Network Models

Practice Set
1. List the layers of the Internet model.
The Internet model, as discussed in this chapter, include physical,
data link, network, transport, and application layers.

2. Which layers in the Internet model are the network support layers?

The network support layers are the physical, data link, and network
layers.

3. Which layer in the Internet model is the user support layer?

The application layer supports the user

4. What is the difference between network layer delivery and


transport layer delivery?

The transport layer is responsible for process-to-process delivery of


the entire message,
whereas the network layer oversees host-to-host delivery of
individual packets.

5. What is a peer-to-peer process?


Peer-to-peer processes are processes on two or more devices
communicating at a same layer
6. How does information get passed from one layer to the next in the
Internet model?

Each layer calls upon the services of the layer just below it using
interfaces between each pair of adjacent layers.

7. What are headers and trailers, and how do they get added and
removed?
Headers and trailers are control data added at the beginning and
the end of each data unit at each layer of the sender and removed
at the corresponding layers of the receiver. They provide source and
destination addresses, synchronization points, information for error
detection, etc

8. What are the concerns of the physical layer in the Internet model?
The physical layer is responsible for transmitting a bit stream over a
physical medium. It is concerned with

a. physical characteristics of the media


b. representation of bits
c. type of encoding
d. synchronization of bits
e. transmission rate and mode
f. the way devices are connected with each other and to the links
9. What are the responsibilities of the data link layer in the Internet
model?
The data link layer is responsible for
a. framing data bits
b. providing the physical addresses of the sender/receiver
c. data rate control

d. detection and correction of damaged and lost frames

10. What are the responsibilities of the network layer in the Internet
model?
The network layer is concerned with delivery of a packet across
multiple networks; therefore, its responsibilities include

a. providing host-to-host addressing


b. routing

II. What are the responsibilities of the transport layer in the Internet
model?
The transport layer oversees the process-to-process delivery of the
entire message. It is responsible for

a. dividing the message into manageable segments


b. reassembling it at the destination
c. flow and error control
12. What is the difference between a port address, a logical address,
and a physical address?
The physical address is the local address of a node; it is used by the
data link layer to deliver data from one node to another within the
same network.

The logical address defines the sender and receiver at the network
layer and is used to deliver messages across multiple networks. The

port address (service-point) identifies the application process on the


station.

13. Name some services provided by the application layer in the


Internet model.
The application layer services include file transfer, remote access,
shared database management, and mail services.

14. How do the layers of the Internet model correlate to the layers of
the OSI model?

The application, presentation, and session layers of the OSI model


are represented by the application layer in the Internet model. The
lowest four layers of OSI correspond to the Internet model layers.
Exercises

15. How are OSI and ISO related to each other?

The International Standards Organization, or the International


Organization of Standards, (ISO) is a multinational body dedicated to
worldwide agreement on international standards. An ISO standard
that covers all aspects of network communications is the Open
Systems Interconnection (OSI) model.

16. Match the following to one or more layers of the OSI model:

a. Route determination
b. Flow control
c. Interface to transmission media
d. Provides access for the end user

a. Route determination: network layer


b. Flow control: data link and transport layers
c. Interface to transmission media: physical layer
d. Access for the end user: application layer

I 7. Match the following to one or more layers of the OSI model:

a. Reliable process-to-process message delivery


b. Route selection
c. Defines frames
d. Provides user services such as e-mail and file transfer
e. Transmission of bit stream across physical medium

a. Reliable process-to-process delivery: transport layer


b. Route selection: network layer
c. Defining frames: data link layer
d. Providing user services: application layer
e. Transmission of bits across the medium: physical layer
18. Match the following to one or more layers of the OSI model:

a. Communicates directly with user's application program


b. Error correction and retransmission
c. Mechanical, electrical, and functional interface
d. Responsibility for carrying frames between adjacent nodes
a. Communication with user’s application program: application
layer

b. Error correction and retransmission: data link and transport layers


c. Mechanical, electrical, and functional interface: physical layer

d. Responsibility for carrying frames between adjacent nodes: data


link layer

I 9. Match the following to one or more layers of the OSI model:

a. Format and code conversion services


b. Establishes, manages, and terminates sessions
c. Ensures reliable transmission of data
d. Log-in and log-out procedures
e. Provides independence from differences in data representation

a. Format and code conversion services: presentation layer

b. Establishing, managing, and terminating sessions: session layer

c. Ensuring reliable transmission of data: data link and transport


layers

d. Log-in and log-out procedures: session layer

e. Providing independence from different data representation:


presentation layer
20. In Figure 2.22, computer A sends a message to computer D via
LAN l, router R l, and LAN2. Show the contents of the packets and
frames at the network and data link layer for each hop interface.

21.In Figure 2.22, assume that the communication is between a


process running at computer A with port address I and a process
running at computer D with port address j . Show the contents of
packets and frames at the network, datalink, and transport layer for
each hop.
22.Suppose a computer sends a frame to another computer on a
bus topology LAN. The physical destination address of the frame is
corrupted during the transmission. What happens to the frame? How
can the sender be informed about the situation?

If the corrupted destination address does not match any station


address in the network, the packet is lost. If the corrupted destination
address matches one of the stations, the frame is delivered to the
wrong station. In this case, however,

the error detection mechanism, available in most data link protocols,


will find the error and discard the frame. In both cases, the source will
somehow be informed using one of the data link control
mechanisms discussed in Chapter 11.

23.Supposeacomputersendsapacketatthenetworklayertoanotherco
mputersomewhereintheInternet.Thelogicaldestinationaddressofthepa
cketiscorrupted.
Whathappenstothepacket?Howcanthesourcecomputerbeinformedof
thesituation?
Before using the destination address in an intermediate or the
destination node, the
packet goes through error checking that may help the node find the
corruption
(with a high probability) and discard the packet. Normally the upper
layer protocol
will inform the source to resend the packet.
24.Suppose a computer sends a packet at the transport layer to
other computers ome where in the Internet. There is no process with
the destination port address running at the destination computer.
What will happen?
Most protocols issue a special error message that is sent back to the
source in this
case.

25.If the data link layer can detect errors between hops,why do you
think we need another checking mechanism at the transport layer?
The errors between the nodes can be detected by the data link
layer control, but the error at the node (between input port and
output port) of the node cannot be
detected by the data link layer.

You might also like