Datasheet CybTouch 8 PSe PS V2.x en
Datasheet CybTouch 8 PSe PS V2.x en
Datasheet CybTouch 8 PSe PS V2.x en
Nov.
© Cybelec 2021 2021 1/6
V2.5
Hardware specifications
Housing or panel version New indexing functions Energy
Delivered integrated into a sleek and Wizard functions make the definition Energy saving thanks to the integrated
modern housing specially designed to of indexes a lot simpler, quicker and Eco mode function that automatically
be attached to a swiveling arm, or more precise. stops the main pump after a chosen
optionally also available as a robust time of inactivity.
panel version.
Wireless communication
Original parameters
Integration RFlink wireless radio frequency data
communication (need optional RFlink Internal backup in a special
Can easily be integrated into the USB key) allows backup, restoring and safe memory allows the user to
electrical box diagrams. Ideal to upgrade firmware upgrades operations without restore at any time the original
machines without NC with minimal any cable connection to the numerical parameters; machine is running
changes. control. During startup, the again in an extremely short
beam’s positioning curves can time in the event of a memory loss
immediately be observed and or involuntary parameter
checked on the PC. modification.
Electrical connections
The following elements are available and can be configured on CybTouch 8 by the OEM.
However, some functions depend on the machine construction.
Features availability depends on the number of available axes and inputs/outputs.
Wizards and auto-tuning of the Program page at start up for Pressure management.
axes (including for the bending quick accessibility. Crowning (pressure or
beam). User friendly tool mechanical type).
High precision and fast positioning management. Crowning automatic calculation.
algorithm for frequency converter Automatic calculation of the Back gauge clearance during the
axes. bend depth, pressure and bending process (yes / no).
Oscilloscope for the beam allowance, the back gauge Sequence repetition.
trajectories via RFlink (without positioning, the crowning, the Part counter with auto-stop.
cable). angle and back gauge Time and stroke counters for oil
Indexing in several modes correction. service.
(including for the bending beam). Manual bend sequencing Pump start button.
Inch / mm. (according to the programmed
material, thickness, bend
angle and selected tools).
Nov.
2021 2/6 © Cybelec 2021
V2.5
Technical Characteristics
Encoder inputs 5 VDC supplied by CybTouch. Max. 250 mA for each encoder.
or 12 VDC or 24 VDC with external power supply.
Complementary signals are not necessary but recommended.
Digital inputs 8 Optocoupled.
Nov.
© Cybelec 2021 2021 3/6
V2.5
Dimensions
Box version
254 161
37
315
55
66
210
Ø 23
Attachment dimensions
70
60
7xØ7 R4.5 A
R3.5
86 40 x 95
70
60
40
61
B
40
80
95 60 x 60 or 65 x 65
80 x 80 x 80
Two adapters are provided. Stick
the appropriate one on top of
the box.
Nov.
2021 4/6 © Cybelec 2021
V2.5
Panel version
254 4
20
214
315
37
297.5
292.5
262.5
10 x Ø 4
287.5
150
226
37.5
5
0
52.5
0
5
190
231
236
BOTTOM
Nov.
© Cybelec 2021 2021 5/6
V2.5
Ordering Information
Nov
CybTouch™, all rights reserved
© Cybelec S.A.2021
®
2021
Nov. 6/6 Cybelec S.A. • Rue des Uttins 27 • CH-1401 Yverdon-les-Bains • Switzerland
V2.5
2021 6/6 © Cybelec 2021
[email protected] www.cybelec.ch
V2.5 Tel. +41 24 447 02 00