Scribd
Upload
26 views

Basic Networking Commands

The document summarizes basic networking commands like tracert, ping, ipconfig, and netstat. Tracert traces the route between hosts and identifies routing issues. Ping tests connectivity by sending ICMP echo requests. Ipconfig displays TCP/IP network configuration values. Netstat displays active connections, listening ports, routing tables, and statistics.

Uploaded by

NIDHI SHARMA
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
26 views

Basic Networking Commands

The document summarizes basic networking commands like tracert, ping, ipconfig, and netstat. Tracert traces the route between hosts and identifies routing issues. Ping tests connectivity by sending ICMP echo requests. Ipconfig displays TCP/IP network configuration values. Netstat displays active connections, listening ports, routing tables, and statistics.

Uploaded by

NIDHI SHARMA
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Basic Networking Commands

This tutorial explains the basic networking commands and their arguments, options, and
parameters.

Tracert

This command is used to diagnose path-related problems. On an IP network, routers


exchange IP packets between the source and the destination. They take IP packets from the
source host and forward them in a sequence until they reach the destination host. The
sequence of routers between the source and destination is known as the path. A path
consists of all routers in a sequence that IP packets sent from the source host traverse to
reach the destination host.

The tracert command prints the path. If all routers on the path are functional, this command
prints the full path. If a router is down on the path, this command prints the path up to the
last operational router.

The tracert command uses the following syntax.

tracert Destination Name or IP address


The following command traces the path to the host named www.google.co.in.

tracert www.google.co.in
The following image shows the output of this command.

The following table lists some important options of the tracert command.

Option Description
-d Do not resolve the IP addresses of intermediate routers to their names.
-h Specifies the maximum number of hops (routers) to search on the path. The default is 30 hops.
-w Specifies the amount of time in milliseconds to wait for a reply message from the router. If not rece
Ping

The ping command is used to test connectivity between two hosts. It sends ICMP echo
request messages to the destination. The destination host replies with ICMP reply messages.
If the ping command gets a reply from the destination host, it displays the reply along with
round-trip times.

The ping command uses the following syntax.

ping destination host IP or name


The following command tests connectivity between the host computer and Google's server.
ping google.com
The following image shows the output of this command.

If you specify the hostname as an argument, the ping command uses the configured DNS
client service to automatically translate the hostname into the IP address.

Ipconfig

This command displays all current TCP/IP network configuration values and refreshes
Dynamic Host Configuration Protocol (DHCP) and Domain Name System (DNS) settings.
This command is mainly used to view the IP addresses on the computers that are configured
to obtain their IP address automatically.

The following image shows the sample output of this command.


The following table lists some important options of the ipconfig command.

Used without Displays the IP address, subnet mask, and default gateway for all adapters.
parameters
/all Displays the full TCP/IP configuration for all adapters.
/renew [Adapter] Renews DHCP configuration for all adapters (if an adapter is not specified) or for a s
/release [Adapter] Sends a DHCPRELEASE message to the DHCP server to release the current DHCP
specified) or for a specific adapter if the Adapter parameter is included.
/flushdns Flushes and resets the contents of the DNS client resolver cache.

Netstat

This command displays active connections, ports on which the computer is listening,
Ethernet statistics, the IP routing table, and IP statistics.

The output of this command is organized in rows and columns. Each row represents a new
connection or an entry in the output. It contains four columns. These columns provide the
following information about the row.

Proto: - This column displays the name of the protocol (TCP or UDP).
Local Address: - This column displays the IP address of the local computer and the port
number being used. If the port is not yet established, the port number is shown as an asterisk
(*).

Foreign Address: - This column displays the IP address and port number of the remote
computer to which the port is connected.

State: - This column displays the status of the connection.

The following image shows the sample output of this command.

Options and parameters

The following table lists some common options of the netstat command.

Option Description
-a Displays all active TCP connections and the TCP and UDP ports on which the computer is liste
-e Displays Ethernet statistics, such as the number of bytes and packets sent and received.
-n Displays active TCP connections, however, addresses and port numbers are expressed numerica
-o Displays active TCP connections and includes the process ID (PID) for each connection.
-p Shows connections for the protocol specified by Protocol. In this case, the Protocol can be TCP
-s Displays statistics by protocol. By default, statistics are shown for the TCP, UDP, ICMP, and IP
-r Displays the contents of the IP routing table.
 Privacy Policy
 Terms and Conditions

You might also like