3 Kinematics of A Particle Rectilinear Motion

MEC HE2 - DYNAMI C S OF RI GI D BODI ES
KINEMATICS OF
A PARTICLE
Prepared by Engr. Kristine Albastro
RECTILINEAR We will begin our study of dynamics by discussing
the kinematics of a particle that moves along a
KINEMATICS
rectilinear or straight-line path. The kinematics of a
particle is characterized by specifying, at any given
instant, the particle's position, velocity, and
acceleration. Recall that a particle has a mass but
negligible size and shape. Therefore, we must limit
application to those objects that have dimensions
that are of no consequence in the analysis of the
motion.
In most problems, we will be interested in bodies of

finite size, such as rockets, projectiles, or vehicles.
Each of these objects can be considered as a
particle, as long as the motion is characterized by
the motion of its mass center and any rotation of
the body is neglected.
POSITION
The straight-line path of a particle will be defined using a single coordinate axis S.
The origin O on the path is a fixed point, and from this point the position
coordinates is used to specify the location of the particle at any given instant. The
magnitude of S is the distance from O to the particle, usually measured in meters
(m) or feet (ft), and the sense of direction is defined by the algebraic sign on S.
Although the choice is arbitrary, in this case S is positive since the coordinate axis
is positive to the right of the origin. Likewise, it is negative if the particle is located
to the left of O. Realize that position is a vector quantity since it has both
magnitude and direction. Here, however, it is being represented by the algebraic
scalar s since the direction always remains along the coordinate axis.
-5 O +5
DISPLACEMENT
The displacement of the particle is defined as the change in its position. For
example, if the particle moves from one point to another the displacement is
ΔS = S’ — S
In this case ΔS is positive since the particle's final position is to the right of its
initial position, i.e. S’ > S. Likewise, if the final position were to the left of its initial
position, ΔS would be negative. The displacement of a particle is also a vector
quantity, and it should be distinguished from the distance the particle travels.
Specifically, the distance traveled is a positive scalar that represents the total
length of path over which the particle travels.
-5 O +5
DISPLACEMENT
ΔS = S’ — S
-5 O +5
DISPLACEMENT
ΔS = S’ — S
-5 O +5
VELOCITY
If the particle moves through a displacement ΔS during the time interval Δt, the
average velocity of the particle during this time interval is
∆�
�� =
∆�
If we take smaller and smaller values of Δt, the magnitude of ΔS becomes smaller
and smaller. Consequently, the instantaneous velocity is a vector defined as
Δ� ��
� = lim ( ) or V =
∆�→0 Δ� ��
The magnitude of the velocity is known as the speed, and it is generally expressed
in units of m/s or ft/s. Occasionally, the term "average speed" is used. The average
speed is always a positive scalar and is defined as the total distance traveled by a
particle divided by the elapsed time.
ACCELERATION
Provided the velocity of the particle is known at two points, the average
acceleration of the particle during the time interval at is defined as
Δ�
�� =
Δ�
Here Δv represents the difference in the velocity during the time interval Δt, i.e. ΔV
= V’ — V. The instantaneous acceleration at time t is a vector that is found by
taking smaller and smaller values of Δt and corresponding smaller and smaller
values of ΔV, so that
Δ�
� = lim ( ∆�
∆�
) or � =
∆�→0 Δ�
Finally, an important differential relation involving the displacement, velocity, and
acceleration along the path may be obtained by eliminating the time differential
�� Δ�
(dt) between the two equations: V = and � =
�� Δ�
� �� = � ��
CONSTANT ACCELERATION
When the acceleration is constant, each of the three kinematic equations
��
V=
��
Δ�
�=
Δ�
� �� = � ��
can be integrated to obtain formulas that relate a, V, S, and t.

VELOCITY AS A FUNCTION OF TIME
�� = �� + ��
POSITION AS A FUNCTION OF TIME

� = �� + 12��2
VELOCITY AS A FUNCTION OF POSITION

�2� − �2� = 2aS
Where:
�� = Initial Velocity
�� = Final Velocity
S = Displacement
a = Acceleration
t = Time Taken
UNIFORMLY ACCELERATED RECTILINEAR MOTION
When an object travels with constant acceleration.
Where:
�� = �� + ��
�� = Initial Velocity
�� = Final Velocity
� = �� + 12��2
S = Displacement
�2� − �2� = 2aS a = Acceleration
t = Time Taken
UNIFORMLY RECTILINEAR MOTION

When an object travels at a constant speed with zero acceleration. (a = 0)
�� = ��
� = ��
EXAMPLES:
1. What is the acceleration of the body that increases in velocity from 20 m/s to 40
m/s in 3 seconds?
2. From a speed of 75 kph, a car decelerates at the rate of 500 m/min 2 along a
straight path. How far in meters will it travel in 45 seconds?
3. With a starting speed of 30 kph at point A, a car accelerates uniformly. After 18
minutes, it reaches point B, 21 km from A. Find the acceleration of the car in
m/s2.
4. A man driving his car at 45 mph suddenly sees an object in the road 60 feet
ahead. What constant deceleration is required to stop the car in this distance?

3 Kinematics of A Particle Rectilinear Motion

Uploaded by

Copyright:

Available Formats

3 Kinematics of A Particle Rectilinear Motion

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

3 Kinematics of A Particle Rectilinear Motion

Uploaded by

Copyright:

Available Formats

MEC HE2 - DYNAMI C S OF RI GI D BODI ES

In most problems, we will be interested in bodies of

can be integrated to obtain formulas that relate a, V, S, and t.

POSITION AS A FUNCTION OF TIME

VELOCITY AS A FUNCTION OF POSITION

UNIFORMLY RECTILINEAR MOTION

You might also like