Scribd Logo
Upload

Welcome to Scribd!

  • 100 views

    Multimedia Filter SOP

    Uploaded by

    Ahmad Naqib
    The document provides instructions for setting a multi media filter to either a running, standby, or backwash setting by opening and closing specific valves. It explains that the valve positions need to be set according to diagrams for each setting. It also notes that for backwash setting, a timer needs to be set on the touch screen and the backwash feed pump switched to manual or automatic.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Multimedia Filter SOP

    Uploaded by

    Ahmad Naqib
    100 views5 pages
    The document provides instructions for setting a multi media filter to either a running, standby, or backwash setting by opening and closing specific valves. It explains that the valve positions need to be set according to diagrams for each setting. It also notes that for backwash setting, a timer needs to be set on the touch screen and the backwash feed pump switched to manual or automatic.

    Original Description:

    Standby, Service and Backwash Setting Procedure

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for setting a multi media filter to either a running, standby, or backwash setting by opening and closing specific valves. It explains that the valve positions need to be set according to diagrams for each setting. It also notes that for backwash setting, a timer needs to be set on the touch screen and the backwash feed pump switched to manual or automatic.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    100 views5 pages

    Multimedia Filter SOP

    Uploaded by

    Ahmad Naqib
    The document provides instructions for setting a multi media filter to either a running, standby, or backwash setting by opening and closing specific valves. It explains that the valve positions need to be set according to diagrams for each setting. It also notes that for backwash setting, a timer needs to be set on the touch screen and the backwash feed pump switched to manual or automatic.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 5

    1

    2 4

    MULTI MEDIA FILTER

    RUNNING SETTING

    1. Open Valve 1
    2. Open Valve 2
    3. Close Valve 3
    4. Close Valve 4
    5. Open Valve 5
    1

    4
    2

    MULTI MEDIA FILTER

    STANDBY SETTING

    1. Close Valve 1
    2. Open Valve 2
    3. Close Valve 3
    4. Close Valve 4
    5. Open Valve 5
    1

    2 4

    MULTI MEDIA FILTER

    BACKWASH SETTING

    1. Open Valve 1
    2. Close Valve 2
    3. Open Valve 3
    4. Open Valve 4
    5. Close Valve 5
    Switch OFF Filter Feed Pump.

    Set valve position for run, standby or


    backwash setting.
    (Refer pictures of Multimedia Filter Run,
    Standby or Backwash Setting)

    Set touch screen monitor accordingly.


    (Refer pictures of Multimedia Filter Run,
    Standby or Backwash Setting)

    Touch the red ‘X’ button to reveal timer


    setting. (Only for Backwash setting)

    Set timer then click on “Manual Backwash


    Start”. (Only for Backwash setting)

    Switch MAN/AUTO Backwash Feed Pump.


    (Only for Backwash setting)

    Switch MAN/AUTO Filter Feed Pump.

    You might also like