NOVOSTRICTIVE

Transducer
up to 4250 mm
touchless

Series TP1

Special features Transducer in profile design with magnetostrictive technology

• Non-contacting magnetostrictive measurement technology for highly accurate and reproducible position measurement for
• Touchless position detection lengths up to 4250 mm. Mechanically decoupled and therefore
• Wear-free, unlimited mechanical life wear-free when the floating position marker is used.
• Resolution up to 1 µm, independently of length
• Low temperature coefficient <15 ppm/K The transducer TP1 is insensitive to dirt, dust or moisture and
• Insensitive to shock and vibration thus proves itself in harsh industrial environments.
• Protection class IP67 / IP68 Depending on the interface, up to three positions and speed can
• Position-Teach-In be measured.
• Optionally galvanic isolated
• Interfaces: Analog, SSI, Impulse, Incremental, CANopen, IO-Link
Applications
• Manufacturing Engineering
Plastic injection molding
Textile
Packaging
Sheet metal working
Woodwork
• Automation Technology

Page 1
 Mechanical Data

Description
Materials Housing: Anodized aluminum, AlMgSi0,5 F22, 3.3206.71
End flanges: Aluminum G AlSi12Cu1 (FE)
Mounting Adjustable clamps (included in delivery)
Position marker Floating position marker, plastic
Guided position marker, plastic, with ball coupling
Electrical connections Connector M12x1, 4-pin / 5-pin / 8-pin, shielded
Connector M16x0.75 (IEC 130-9), 6-pin / 8-pin, shielded
PUR-cable, 8 x 0.25 mm2, shielded: 1 m, 3 m oder 5 m length
Electronic SMD with ASIC, integrated
Connector casing (shield) is connected to the sensor housing.
Housing is capacitively decoupled to the electronics
Mechanical Data
Dimensions see dimension drawing
Length of housing (dimension A) Dimension B + 146 mm
Electrical measuring range 0050 up to 0500 mm in 25 mm steps,
(dimension B) 500 up to 1000 mm in 50 mm steps,
1000 up to 2000 mm in 100 mm steps,
2000 up to 4250 mm in 250 mm steps
other lengths on request
Max. operational speed 10 ms-1
with valid output signal
Max. operational acceleration 200 ms-2
with valid output signal
Shock (IEC 60068-2-27) 100 (11 ms) (single hit) g
Vibration (IEC 60068-2-6) 20 (5...2000 Hz, Amax = 0.75 mm) g
Protection class (DIN EN 60529) IP67 with fastened connector
IP68 with cable connection
Life Mechanically unlimited
(with floating position marker)
Operating temperature range -40 ... +85 °C
Storage temperature range -40 ... +105 °C
Operating humidity range 0 ... 95 (no condensation) % R.H.

CAD data see

www.novotechnik.de/en/download/cad-data/

Page 3 back to contents

 Technical Data
Impulse-Interface

Type designations TP1- _ _ _ _ - 101 - 11 _ - _ _ _

Start-Stop-Impulse-Interface
Electrical Data
Electrical measuring range (dimension B) 0050 up to 4250 mm
Number of position markers 1 up to 3
Protocol Impulse
Inputs RS422
Sampling rate / Update rate < 500 mm: 1 kHz, 500 ... < 2000 mm: 0.5 kHz, > 2000 mm: 0.25 kHz kHz
Resolution Depending on interpretation, normalized to 2800 ms-1
Absolute linearity < 1000 mm < ±50 μm µm
< 2500 mm < ±80 μm
up to 4250 mm < ±120 μm
Tolerance of electr. zero point ± 0.5 mm
Reproducibility <6 µm
Hysteresis <4 µm
Temperature error < 15 (min. 0,01 mm/K) ppm/K
Supply voltage 24 (13 ... 34) VDC
Supply voltage ripple < 10 % Ub
Overvoltage protection 40 (permanent) VDC
Current consumption < 100 mA
Polarity protection Yes, up to supply voltage max.
Short circuit protection Yes (outputs vs. GND and supply voltage up to 7 V)
Insulation resistance (500 VDC) > 10 MΩ
Environmental Data
MTTF (DIN EN ISO 13849-1, 27 Years
parts count method, w/o load, wc)
Functional safety If you need assistance in using our products in safety-related systems, please contact us
EMC compatibility EN 61000-4-2 Electrostatic discharges (ESD) 4 kV, 8 kV
EN 61000-4-3 Electromagnetic fields 10 V/m
EN 61000-4-4 Electrical fast transients (burst) 2 kV
EN 61000-4-6 Conducted disturbances, induced by RF-fields 10 V eff.
EN 55011 Radiated disturbances class B

Pin assignment
Connector Cable Connector Start/Stop-Impulse- Connector Connector Start/Stop-Impulse-
code 101, 102 code 20 _ with cable Interface code 103 with cable Interface
(Accessories) (Accessories)
Pin 1 YE WH INIT + Pin 1 WH Start/Stop -
Pin 2 GY BN Start/Stop + Pin 2 BN Start/Stop +
Pin 3 PK GN INIT - Pin 3 BU INIT +
Pin 4 RD YE do not connect Pin 4 BK INIT -
Pin 5 GN GY Start/Stop - Pin 5 GY Supply voltage
Pin 6 BU PK GND Pin 6 GN GND
Pin 7 BN BU Supply voltage
Pin 8 WH RD do not connect

Page 7 back to contents

 Ordering
Specifications
Digital Versions
- SSI
- Start-Stop-Impulse
- Incremental

Ordering specifications Mechanical version

101: Profile design
Preferred types printed in bold

Electrical Interface
1: Impulse-Interface
2: SSI-Interface
8: Incremental-Interface (A / B / Z)

Output signal Impulse-Interface 1 _ _

1: Impulse-Interface Start-Stop Signal

Output signal SSI-Interface 2 _ _

1: SSI 24 bit
2: SSI 25 bit
7: SSI 26 bit (25 = alarm, 26 = parity even) on request

Output signal Incremental-Interface 8 _ _

4: Resolution 5 μm, high speed mode, power-on burst
6: Resolution 1 μm, high speed mode, power-on burst
7: Resolution 5 μm, low speed mode, power-on burst
9: Resolution 1 μm, low speed mode, power-on burst

Impulse-Interface Start-Stop Signal 11_

1: For 1 position marker
2: For 2 position markers
3: For 3 position markers

Synchronous-Serial Interface 2 _ _
1: Binary code; resolution 5 μm
2: Gray code; resolution 5 μm
4: Binary code; resolution 1 μm
5: Gray code; resolution 1 μm
7: Binary code; resolution 10 µm
8: Gray code; resolution 10 μm

Incremental-Interface 8 _ _
1: RS422 differential (A / B / Z)

Electrical connection
101: Connector M16x0.75 (IEC 130-9), 8-pin *
102: Connector M12x1, 8-pin
103: Connector M16x0.75 (IEC 130-9), 6-pin *
201: Cable, 8-pole, shielded, 1 m
203: Cable, 8-pole, shielded, 3 m
205: Cable, 8-pole, shielded, 5 m
*) not for incremental interface

T P 1 – 0 8 0 0 – 1 0 1 – 2 1 1 – 1 0 2

Series Electrical measuring range

Standard lengths 0050 up to 4250 mm
0050 up to 0500 mm in 25 mm-steps, 0500 up to 1000 mm in 50 mm-steps,
1000 up to 2000 mm in 100 mm-steps, 2000 up to 4250 mm in 250 mm-steps.
Other lengths on request

Important: Avoid equalizing currents in the cable shield caused by potential differences.
Twisted pair cable (STP) is recommended.

Page 9 back to contents

 Position Marker

Floating positon marker

Material PA6 GF25

Working distance 0.5 ... 3 mm

Weight approx. 10 g

P/N 005693, Z-TP1-P06

Floating positon marker for large distances

Material PA6 GB30

Working distance 3 ... 12 mm

Weight approx. 40 g

P/N 005694, Z-TP1-P07

Guided position marker

Matreial POM

Weight approx. 30 g

P/N 005695, Z-TP1-P08

Actuating rod for guided position marker

Z-TP1-P08

Material Aluminum

Weight approx. 150 g

Standard- 0075, 0100, 0125, 0150,

nominal lengths 0200, 0250, 0300, 0350,
(mm) 0400, 0450, 0500, 0600,
Ordering example: 0800, 1000, 1500, 2000
Z-TP1-S01- _ _ _ _
Z-TP1-S01-_ _ _ _
Environmental conditions, length of actuating
nominal lengths in mm rod, acceleration etc. have a direct influence
on life time and accuracy of the whole system;
it must be qualified by the user in the real
application.

Page 13 back to contents

 Connector System
M12

Pin assignment 1 = white M12x1 Mating female connector, 8-pin,

2 = brown straight, A-coded, with molded cable,
3 = green shielded, IP67, open ended
4 = yellow
Connector housing Plastic PA
5 = grey
6 = pink Cable sheath PUR; Ø = max. 8 mm
7 = blue -25 °C...+80 °C (moved)
8 = red -50 °C...+80 °C (fixed)

Wires PP, 0.25 mm2

Length Type P/N

2m EEM 33-86 005629

5m EEM 33-90 005635
10 m EEM 33-92 005637

Pin assignment M12x1 Mating female connector, 8-pin,

1 = white
2 = brown angled, A-coded, with molded cable,
3 = green shielded, IP67, open ended
4 = yellow Connector housing Plastic PA
5 = grey
6 = pink Cable sheath PUR; Ø = max. 8 mm,
7 = blue -25 °C...+80 °C (moved)
8 = red -50 °C...+80 °C (fixed)

Wires PP, 0.25 mm2

Length Type P/N
2m EEM 33-87 005630
5m EEM 33-91 005636
10 m EEM 33-93 005638

Pin assignment M12x1 Mating female connector, 5-pin,

straight, A-coded, with molded cable,
1 = Shield
IP67, shielded, open ended, CAN-bus
2 = red (0.34 mm2)
3 = black (0.34 mm2) Connector housing PUR
4 = white (0.25 mm2)
5 = blue (0.25 mm2) Cable sheath PUR Ø = max. 7.2 mm,
-25 °C...+85 °C (moved)

Wires PP 2x 0.25 mm2

+ 2 x 0.34 mm2
Length Type P/N
2m EEM 33-41 056141
5m EEM 33-42 056142
10 m EEM 33-43 056143

Pin assignment M12x1 Mating female connector, 5-pin,

straight, A-coded, with molded cable,
IP68, shielded, CAN-bus

Connector housing PUR

Cable sheath PUR; Ø 7.2 mm

-25 °C... +85 °C (fixed)

Length Type P/N

5m EEM 33-44 056144

Page 14 back to contents

 Connector System
M12

Pin assignment T-connector M12x1, 5-pin, A-coded, IP68,

1:1 connection, female - male - female,
CAN-bus

Connector housing PUR

Temperature range -25 °C... +85 °C

Type EEM 33-45, P/N 056145

Pin assignment Terminating resistor M12x1, 5-pin, A-coded,

1 = n. c. IP67, 120 Ω resistance, CAN-bus
2 = n. c.
Connector housing PUR
3 = n. c.
4= Resistance Temperature range -25 °C... +85 °C
5= 120 Ω
Type EEM 33-47, P/N 056147

Pin assignment M12x1 Mating female connector, 5-pin,

straight, A-coded, with coupling nut,
screw termination, IP67, shieldable,
CAN-bus

Connector housing Metal

-40 °C...+85 °C

For wire gauge 6...8 mm,

max. 0.75 mm2

Type EEM 33-73, P/N 005645

Pin assignment M12x1 Mating female connector, 5-pin,

angled, A-coded, with coupling nut,
screw termination, IP67, shieldable,
CAN-bus

Connector housing Metal

-40 °C...+85 °C

For wire gauge 6...8 mm,

max. 0.75 mm2

Type EEM 33-75, P/N 005646

It is possible to turn and fix the contact

carrier in 90° positions.

Page 15 back to contents

 Connector System
M12

Pin assignment M12x1 Mating female connector, 4-pin,

straight, A-coded, with molded cable, not
1 = brown shielded, IP67, open ended
2 = white
3 = blue Connector housing Plastic PA
4 = black
Cable sheath PUR; Ø = max. 6 mm,
-40 °C...+85 °C (fixed)

Wires PP, 0.34 mm2

Length Type P/N

2m EEM 33-35 056135
5m EEM 33-36 056136
10 m EEM 33-37 056137

Pin assignment M12x1 Mating female connector, 4-pin,

1 = brown angled, A-coded, with molded cable, not
2 = white shielded, IP67, open ended
3 = blue
Connector housing Plastic PA
4 = black
Cable sheath PUR; Ø = max. 6 mm,
-40 °C...+85 °C (fixed)

Wires PP, 0.34 mm2

Length Type P/N

2m EEM 33-38 056138
5m EEM 33-39 056139
10 m EEM 33-40 056140

Pin assignment M12x1 Mating female connector, 4-pin,

angled, A-coded, with coupling nut,
screw termination, IP67, not shielded

Connector Plastic PBT

housing -25 °C...+90 °C

For wire gauge 6...8 mm, max. 0.75 mm2

Type EEM 33-89, P/N 005634

Page 16 back to contents

 Connector System
M16

Pin assignment M16x0.75 Mating female connector, 6-pin,

straight, with molded cable, 2 m length,
1 = red
shielded, IP67, open ended
2 = black
3 = yellow Connector PUR
4 = blue housing
5 = white
Cable sheath PUR; Ø max. 6 mm,
6 = green
-5...+70 °C (moved)
-20...+70 °C (fixed)

Wires PVC, 6 x 0.25 mm2

Type EEM 33-26, P/N 056126

This coupling can can be used in combination

with 5-pin M16 connectors. Than „pin 6/
green“ is open.

Pin assignment M16x0.75 Mating female connector, 6-pin,

angled, with molded cable, 2 m length,
1 = red shielded, IP67, open ended
2 = black
3 = yellow Connector PUR
4 = blue housing
5 = white
Cable sheath PUR; Ø max. 6 mm,
6 = green
-5...+70 °C (moved)
-20...+70 °C (fixed)

Wires PVC, 6 x 0.25 mm2

Type EEM 33-27, P/N 056127

This coupling can can be used in combination

with 5-pin M16 connectors. Than „pin 6 /
green“ is open.

Pin assignment M16x0,75 Mating female connector, 6-pin,

straight, with coupling nut, solder terminal,
IP68, shielded

Connector housing CuZn

(Brass, nickel plated)
-40 °C... +85 °C

For wire gauge 4...8 mm,

max. 0.75 mm²

Type EEM 33-82, P/N 005639

Pin assignment M16x0,75 Mating female connector, 6-pin,

angled, with coupling nut, solder terminal,
IP67, shielded

Connector housing CuZn

(Brass, nickel plated)
-40 °C... +95 °C

For wire gauge 6...8 mm, PG 9

max. 0.75 mm²

Type EEM 33-94, P/N 005648

Page 17 back to contents

 Novotechnik
Messwertaufnehmer OHG
Postfach 4220
73745 Ostfildern (Ruit)
Horbstraße 12
73760 Ostfildern (Ruit)
Telefon +49 711 4489-0
Telefax +49 711 4489-118
[email protected]
www.novotechnik.de

© 04/2018
Printed in Germany.

Pin assignment M16x0.75 Mating female connector, 8-pin,

straight, with coupling nut, solder terminal,
IP68, shielded

Connector CuZn
housing (Brass, nickel plated)
-40 °C... +85 °C

For wire gauge 4...8 mm,

max. 0.75 mm²

Type EEM 33-84, P/N 005627

Pin assignment M16x0.75 Mating female connector, 8-pin,

angled, with coupling nut, solder terminal,
IP67, shielded

Connector CuZn
housing (Brass, nickel plated)
-40 °C... +95 °C

For wire gauge 6...8 mm, PG 9

max. 0.75 mm²

Type EEM 33-85, P/N 005628

Very good Electromagnetic Suited for applications in

Protection class IP67 to DIN EN Compatibility (EMC) and shield dragchains
60529 systems

Very good resistance to oils,

Protection class IP68 to DIN EN
coolants und lubricants
60529

CAN-bus UL - approved

Note: The protection class is valid

only in locked position with its
plugs.
The application of these products
in harsh environments must be
checked in particular cases.

The specifications contained in our datasheets are intended solely for informational purposes. The documented specification values are based on ideal operational and environmental conditions and
can vary significantly depending on the actual customer application. Using our products at or close to one or more of the specified performance ranges can lead to limitations regarding other per-
formance parameters. It is therefore necessary that the end user verifies relevant performance parameters in the intended application. We reserve the right to change product specifications without
notice.

Page 18 back to contents