@set masver=2.

4
@setlocal DisableDelayedExpansion
@echo off

::============================================================================
::
:: This script is a part of 'Microsoft_Activation_Scripts' (MAS) project.
::
:: Homepage: mass grave[.]dev
:: Email: [email protected]
::
::============================================================================

::=================================================================================
=======================================================

:: Set Path variable, it helps if it is misconfigured in the system

set "PATH=%SystemRoot%\System32;%SystemRoot%\System32\wbem;%SystemRoot%\System32\
WindowsPowerShell\v1.0\"
if exist "%SystemRoot%\Sysnative\reg.exe" (
set "PATH=%SystemRoot%\Sysnative;%SystemRoot%\Sysnative\wbem;%SystemRoot%\
Sysnative\WindowsPowerShell\v1.0\;%PATH%"
)

:: Re-launch the script with x64 process if it was initiated by x86 process on x64
bit Windows
:: or with ARM64 process if it was initiated by x86/ARM32 process on ARM64 Windows

set "_cmdf=%~f0"
for %%# in (%*) do (
if /i "%%#"=="r1" set r1=1
if /i "%%#"=="r2" set r2=1
if /i "%%#"=="-qedit" (
reg add HKCU\Console /v QuickEdit /t REG_DWORD /d "1" /f %nul1%
rem check the code below admin elevation to understand why it's here
)
)

if exist %SystemRoot%\Sysnative\cmd.exe if not defined r1 (

setlocal EnableDelayedExpansion
start %SystemRoot%\Sysnative\cmd.exe /c ""!_cmdf!" %* r1"
exit /b
)

:: Re-launch the script with ARM32 process if it was initiated by x64 process on
ARM64 Windows

if exist %SystemRoot%\SysArm32\cmd.exe if %PROCESSOR_ARCHITECTURE%==AMD64 if not

defined r2 (
setlocal EnableDelayedExpansion
start %SystemRoot%\SysArm32\cmd.exe /c ""!_cmdf!" %* r2"
exit /b
)
::=================================================================================
=======================================================

set "blank="
set "mas=ht%blank%tps%blank%://mass%blank%grave.dev/"

:: Check if Null service is working, it's important for the batch script

sc query Null | find /i "RUNNING"

if %errorlevel% NEQ 0 (
echo:
echo Null service is not running, script may crash...
echo:
echo:
echo Help - %mas%troubleshoot.html
echo:
echo:
ping 127.0.0.1 -n 10
)
cls

:: Check LF line ending

pushd "%~dp0"
>nul findstr /v "$" "%~nx0" && (
echo:
echo Error: Script either has LF line ending issue or an empty line at the end of
the script is missing.
echo:
ping 127.0.0.1 -n 6 >nul
popd
exit /b
)
popd

::=================================================================================
=======================================================

cls
color 07
title Troubleshoot %masver%

set _args=
set _elev=

set _args=%*
if defined _args set _args=%_args:"=%
if defined _args (
for %%A in (%_args%) do (
if /i "%%A"=="-el" set _elev=1
)
)

set "nul1=1>nul"
set "nul2=2>nul"
set "nul6=2^>nul"
set "nul=>nul 2>&1"

set psc=powershell.exe
set winbuild=1
for /f "tokens=6 delims=[]. " %%G in ('ver') do set winbuild=%%G

set _NCS=1
if %winbuild% LSS 10586 set _NCS=0
if %winbuild% GEQ 10586 reg query "HKCU\Console" /v ForceV2 %nul2% | find /i "0x0"
%nul1% && (set _NCS=0)

call :_colorprep

set "nceline=echo: &echo ==== ERROR ==== &echo:"

set "eline=echo: &call :_color %Red% "==== ERROR ====" &echo:"
set
"line=_____________________________________________________________________________
____________________"
if %~z0 GEQ 200000 (set "_exitmsg=Go back") else (set "_exitmsg=Exit")

::=================================================================================
=======================================================

if %winbuild% LSS 7600 (

%nceline%
echo Unsupported OS version detected [%winbuild%].
echo Project is supported only for Windows 7/8/8.1/10/11 and their Server
equivalent.
goto at_done
)

for %%# in (powershell.exe) do @if "%%~$PATH:#"=="" (

%nceline%
echo Unable to find powershell.exe in the system.
goto at_done
)

::=================================================================================
=======================================================

:: Fix for the special characters limitation in path name

set "_work=%~dp0"
if "%_work:~-1%"=="\" set "_work=%_work:~0,-1%"

set "_batf=%~f0"
set "_batp=%_batf:'=''%"

set _PSarg="""%~f0""" -el %_args%

set "_ttemp=%userprofile%\AppData\Local\Temp"

setlocal EnableDelayedExpansion

::=================================================================================
=======================================================

echo "!_batf!" | find /i "!_ttemp!" %nul1% && (

if /i not "!_work!"=="!_ttemp!" (
%nceline%
echo Script is launched from the temp folder,
echo Most likely you are running the script directly from the archive file.
echo:
echo Extract the archive file and launch the script from the extracted folder.
goto at_done
)
)

::=================================================================================
=======================================================

:: Elevate script as admin and pass arguments and preventing loop

%nul1% fltmc || (
if not defined _elev %psc% "start cmd.exe -arg '/c \"!_PSarg:'=''!\"' -verb runas"
&& exit /b
%nceline%
echo This script requires admin privileges.
echo To do so, right click on this script and select 'Run as administrator'.
goto at_done
)

::=================================================================================
=======================================================

:: This code disables QuickEdit for this cmd.exe session only without making
permanent changes to the registry
:: It is added because clicking on the script window pauses the operation and
leads to the confusion that script stopped due to an error

for %%# in (%_args%) do (if /i "%%#"=="-qedit" set quedit=1)

reg query HKCU\Console /v QuickEdit %nul2% | find /i "0x0" %nul1% || if not defined
quedit (
reg add HKCU\Console /v QuickEdit /t REG_DWORD /d "0" /f %nul1%
start cmd.exe /c ""!_batf!" %_args% -qedit"
rem quickedit reset code is added at the starting of the script instead of here
because it takes time to reflect in some cases
exit /b
)

::=================================================================================
=======================================================

:: Check for updates

set -=
set old=

for /f "delims=[] tokens=2" %%# in ('ping -4 -n 1 updatecheck.mass%-%grave.dev') do

(
if not [%%#]==[] (echo "%%#" | find "127.69" %nul1% && (echo "%%#" | find
"127.69.%masver%" %nul1% || set old=1))
)

if defined old (
echo ________________________________________________
%eline%
echo You are running outdated version MAS %masver%
echo ________________________________________________
echo:
echo [1] Download Latest MAS
echo [0] Continue Anyway
echo:
call :_color %_Green% "Enter a menu option in the Keyboard [1,0] :"
choice /C:10 /N
if !errorlevel!==2 rem
if !errorlevel!==1 (start ht%-%tps://github.com/mass%-%gravel/Microsoft-Acti%-
%vation-Scripts & start %mas% & exit /b)
)
cls

::=================================================================================
=======================================================

setlocal DisableDelayedExpansion

:: Check desktop location

set desktop=
for /f "skip=2 tokens=2*" %%a in ('reg query "HKCU\Software\Microsoft\Windows\
CurrentVersion\Explorer\User Shell Folders" /v Desktop') do call set "desktop=%%b"
if not defined desktop for /f "delims=" %%a in ('%psc% "& {write-host $
([Environment]::GetFolderPath('Desktop'))}"') do call set "desktop=%%a"

if not defined desktop (

%eline%
echo Desktop location was not detected, aborting...
goto at_done
)

setlocal EnableDelayedExpansion

::=================================================================================
=======================================================

:at_menu

cls
color 07
title Troubleshoot %masver%
mode con cols=77 lines=30

echo:
echo:
echo:
echo:
echo: _______________________________________________________________
echo:
call :_color2 %_White% " [1] " %_Green% "Help"
echo: ___________________________________________________
echo:
echo: [2] Dism RestoreHealth
echo: [3] SFC Scannow
echo:
echo: [4] Fix WMI
echo: [5] Fix Licensing
echo: [6] Fix WPA Registry
echo: ___________________________________________________
echo:
echo: [0] %_exitmsg%
echo: _______________________________________________________________
echo:
call :_color2 %_White% " " %_Green% "Enter a menu option in the Keyboard
:"
choice /C:1234560 /N
set _erl=%errorlevel%

if %_erl%==7 exit /b
if %_erl%==6 start %mas%fix-wpa-registry.html &goto at_menu
if %_erl%==5 goto:retokens
if %_erl%==4 goto:fixwmi
if %_erl%==3 goto:sfcscan
if %_erl%==2 goto:dism_rest
if %_erl%==1 start %mas%troubleshoot.html &goto at_menu
goto :at_menu

::=================================================================================
=======================================================

:dism_rest

cls
mode 98, 30
title Dism /English /Online /Cleanup-Image /RestoreHealth

if %winbuild% LSS 9200 (

%eline%
echo Unsupported OS version Detected.
echo This command is supported only for Windows 8/8.1/10/11 and their Server
equivalent.
goto :at_back
)

set _int=
for %%a in (l.root-servers.net resolver1.opendns.com download.windowsupdate.com
google.com) do if not defined _int (
for /f "delims=[] tokens=2" %%# in ('ping -n 1 %%a') do (if not [%%#]==[] set
_int=1)
)

echo:
if defined _int (
echo Checking Internet Connection [Connected]
) else (
call :_color2 %_White% " " %Red% "Checking Internet Connection [Not
connected]"
)

echo %line%
echo:
echo Dism uses Windows Update to provide the files required to fix corruption.
echo This will take 5-15 minutes or more..
echo %line%
echo:
echo Notes:
echo:
call :_color2 %_White% " - " %Gray% "Make sure the Internet is connected."
call :_color2 %_White% " - " %Gray% "Make sure the Windows update is properly
working."
echo:
echo %line%
echo:
choice /C:09 /N /M "> [9] Continue [0] Go back : "
if %errorlevel%==1 goto at_menu

cls
mode 110, 30
call :_stopservice TrustedInstaller

set _time=
for /f %%a in ('%psc% "Get-Date -format HH_mm_ss"') do set _time=%%a
echo:
echo Applying the command,
echo dism /english /online /cleanup-image /restorehealth
dism /english /online /cleanup-image /restorehealth

call :_stopservice TrustedInstaller

if not exist "!desktop!\AT_Logs\" md "!desktop!\AT_Logs\" %nul%

call :compresslog cbs\CBS.log RHealth_CBS %nul%

call :compresslog DISM\dism.log RHealth_DISM %nul%

if not exist "!desktop!\AT_Logs\RHealth_CBS_%_time%.cab" (

copy /y /b "%SystemRoot%\logs\cbs\cbs.log" "!desktop!\AT_Logs\RHealth_CBS_%_time
%.log" %nul%
)

if not exist "!desktop!\AT_Logs\RHealth_DISM_%_time%.cab" (

copy /y /b "%SystemRoot%\logs\DISM\dism.log" "!desktop!\AT_Logs\RHealth_DISM_%_time
%.log" %nul%
)

echo:
call :_color %Gray% "CBS and DISM logs are copied to the AT_Logs folder on the
dekstop."
goto :at_back

::=================================================================================
=======================================================

:sfcscan

cls
mode 98, 30
title sfc /scannow

echo:
echo %line%
echo:
echo System File Checker will repair missing or corrupted system files.
echo This will take 10-15 minutes or more..
echo:
echo If SFC could not fix something, then run the command again to see if it
may be able
echo to the next time. Sometimes it may take running the sfc /scannow command
3 times
echo restarting the PC after each time to completely fix everything that it's
able to.
echo:
echo %line%
echo:
choice /C:09 /N /M "> [9] Continue [0] Go back : "
if %errorlevel%==1 goto at_menu

cls
call :_stopservice TrustedInstaller

set _time=
for /f %%a in ('%psc% "Get-Date -format HH_mm_ss"') do set _time=%%a
echo:
echo Applying the command,
echo sfc /scannow
sfc /scannow

call :_stopservice TrustedInstaller

if not exist "!desktop!\AT_Logs\" md "!desktop!\AT_Logs\" %nul%

call :compresslog cbs\CBS.log SFC_CBS %nul%

if not exist "!desktop!\AT_Logs\SFC_CBS_%_time%.cab" (

copy /y /b "%SystemRoot%\logs\cbs\cbs.log" "!desktop!\AT_Logs\SFC_CBS_%_time%.log"
%nul%
)

echo:
call :_color %Gray% "CBS log is copied to the AT_Logs folder on the dekstop."
goto :at_back

::=================================================================================
=======================================================

:retokens

cls
mode con cols=125 lines=32
%psc% "&{$W=$Host.UI.RawUI.WindowSize;$B=$Host.UI.RawUI.BufferSize;
$W.Height=31;$B.Height=200;$Host.UI.RawUI.WindowSize=$W;
$Host.UI.RawUI.BufferSize=$B;}"
title Fix Licensing ^(ClipSVC ^+ Office vNext ^+ SPP ^+ OSPP^)

echo:
echo %line%
echo:
echo Notes:
echo:
echo - It helps in troubleshooting activation issues.
echo:
echo - This option will,
echo - Deactivate Windows and Office, you may need to reactivate
echo If Windows is activated with motherboard / OEM / Digital license
then don't worry
echo:
echo - Clear ClipSVC, Office vNext, SPP and OSPP licenses
echo - Fix SPP permissions of tokens folder and registries
echo - Trigger the repair option for Office.
echo:
call :_color2 %_White% " - " %Red% "Apply it only when it is necessary."
echo:
echo %line%
echo:
choice /C:09 /N /M "> [9] Continue [0] Go back : "
if %errorlevel%==1 goto at_menu

::=================================================================================
=======================================================

:: Rebuild ClipSVC Licences

cls
:cleanlicensing

echo:
echo %line%
echo:
call :_color %Blue% "Rebuilding ClipSVC Licences"
echo:

if %winbuild% LSS 10240 (

echo ClipSVC Licence rebuilding is supported only on Win 10/11 and Server
equivalent.
echo Skipping...
goto :cleanvnext
)

%psc% "(([WMISEARCHER]'SELECT Name FROM SoftwareLicensingProduct WHERE

LicenseStatus=1 AND GracePeriodRemaining=0 AND PartialProductKey IS NOT
NULL').Get()).Name" %nul2% | findstr /i "Windows" %nul1% && (
echo Windows is permanently activated.
echo Skipping rebuilding ClipSVC licences...
goto :cleanvnext
)

echo Stopping ClipSVC service...

call :_stopservice ClipSVC
timeout /t 2 %nul%

echo:
echo Applying the command to Clean ClipSVC Licences...
echo rundll32 clipc.dll,ClipCleanUpState

rundll32 clipc.dll,ClipCleanUpState

if %winbuild% LEQ 10240 (

echo [Successful]
) else (
if exist "%ProgramData%\Microsoft\Windows\ClipSVC\tokens.dat" (
call :_color %Red% "[Failed]"
) else (
echo [Successful]
)
)

:: Below registry key (Volatile & Protected) gets created after the ClipSVC
License cleanup command, and gets automatically deleted after
:: system restart. It needs to be deleted to activate the system without restart.

set "RegKey=HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ClipSVC\Volatile\

PersistedSystemState"
set "_ident=HKU\S-1-5-19\SOFTWARE\Microsoft\IdentityCRL"

reg query "%RegKey%" %nul% && %nul% call :regownstart

reg delete "%RegKey%" /f %nul%

echo:
echo Deleting a Volatile ^& Protected Registry Key...
echo [%RegKey%]
reg query "%RegKey%" %nul% && (
call :_color %Red% "[Failed]"
echo Restart the system, that will delete this registry key automatically.
) || (
echo [Successful]
)

:: Clear HWID token related registry to fix activation incase if there is any
corruption

echo:
echo Deleting a IdentityCRL Registry Key...
echo [%_ident%]
reg delete "%_ident%" /f %nul%
reg query "%_ident%" %nul% && (
call :_color %Red% "[Failed]"
) || (
echo [Successful]
)

call :_stopservice ClipSVC

:: Rebuild ClipSVC folder to fix permission issues

echo:
if %winbuild% GTR 10240 (
echo Deleting Folder %ProgramData%\Microsoft\Windows\ClipSVC\
rmdir /s /q "C:\ProgramData\Microsoft\Windows\ClipSvc" %nul%

if exist "%ProgramData%\Microsoft\Windows\ClipSVC\" (
call :_color %Red% "[Failed]"
) else (
echo [Successful]
)

echo:
echo Rebuilding Folder %ProgramData%\Microsoft\Windows\ClipSVC\
net start ClipSVC /y %nul%
timeout /t 3 %nul%
if not exist "%ProgramData%\Microsoft\Windows\ClipSVC\" timeout /t 5 %nul%
if not exist "%ProgramData%\Microsoft\Windows\ClipSVC\" (
call :_color %Red% "[Failed]"
) else (
echo [Successful]
)
)
echo:
echo Restarting [wlidsvc LicenseManager] services...
for %%# in (wlidsvc LicenseManager) do (net stop %%# /y %nul% & net start %%# /y
%nul%)

::=================================================================================
=======================================================

:: Find remnants of Office vNext license block and remove it because it stops non
vNext licenses from appearing
:: https://learn.microsoft.com/en-us/office/troubleshoot/activation/reset-office-
365-proplus-activation-state

:cleanvnext

echo:
echo %line%
echo:
call :_color %Blue% "Clearing Office vNext License"
echo:

setlocal DisableDelayedExpansion
set "_Local=%LocalAppData%"
setlocal EnableDelayedExpansion

attrib -R "!ProgramData!\Microsoft\Office\Licenses" %nul%

attrib -R "!_Local!\Microsoft\Office\Licenses" %nul%

if exist "!ProgramData!\Microsoft\Office\Licenses\" (
rd /s /q "!ProgramData!\Microsoft\Office\Licenses\" %nul%
if exist "!ProgramData!\Microsoft\Office\Licenses\" (
echo Failed To Delete - !ProgramData!\Microsoft\Office\Licenses\
) else (
echo Deleted Folder - !ProgramData!\Microsoft\Office\Licenses\
)
) else (
echo Not Found - !ProgramData!\Microsoft\Office\Licenses\
)

if exist "!_Local!\Microsoft\Office\Licenses\" (
rd /s /q "!_Local!\Microsoft\Office\Licenses\" %nul%
if exist "!_Local!\Microsoft\Office\Licenses\" (
echo Failed To Delete - !_Local!\Microsoft\Office\Licenses\
) else (
echo Deleted Folder - !_Local!\Microsoft\Office\Licenses\
)
) else (
echo Not Found - !_Local!\Microsoft\Office\Licenses\
)

echo:
for /f "tokens=* delims=" %%a in ('%psc% "$userSIDs = Get-WmiObject -Class
Win32_UserAccount | ForEach-Object {write-host $_.SID}" %nul6%') do (if defined
_sid (set "_sid=!_sid! HKU\%%a") else (set "_sid=HKU\%%a"))

set regfound=
for %%# in (HKCU !_sid!) do (
for %%A in (
%%#\Software\Microsoft\Office\16.0\Common\Licensing
%%#\Software\Microsoft\Office\16.0\Common\Identity
%%#\Software\Microsoft\Office\16.0\Registration
) do (
reg query %%A %nul% && (
set regfound=1
reg delete %%A /f %nul% && (
echo Deleted Registry - %%A
) || (
echo Failed to Delete - %%A
)
)
)
)
if not defined regfound echo Not Found - Office vNext Registry Keys

::=================================================================================
=======================================================

:: Rebuild SPP Tokens

echo:
echo %line%
echo:
call :_color %Blue% "Rebuilding SPP Licensing Tokens"
echo:

call :scandat check

if not defined token (

call :_color %Red% "tokens.dat file not found."
) else (
echo tokens.dat file: [%token%]
)

if %winbuild% GEQ 14393 (

set wpaerror=
set /a count=0
for /f %%a in ('reg query "HKLM\SYSTEM\WPA" %nul6%') do set /a count+=1
for /L %%# in (1,1,!count!) do (
reg query "HKLM\SYSTEM\WPA\8DEC0AF1-0341-4b93-85CD-72606C2DF94C-7P-%%#" /ve /t
REG_BINARY %nul% || set wpaerror=1
)

if defined wpaerror (
echo:
echo Checking WPA Registry Keys...
call :_color %Red% "[Error Found] [Registry Count - !count!]"
)
)

set tokenstore=
for /f "skip=2 tokens=2*" %%a in ('reg query "HKLM\SOFTWARE\Microsoft\Windows NT\
CurrentVersion\SoftwareProtectionPlatform" /v TokenStore %nul6%') do call set
"tokenstore=%%b"

:: Check sppsvc permissions and apply fixes

if %winbuild% GEQ 10240 (

echo:
echo Checking SPP permission related issues...
call :checkperms

if defined permerror (

mkdir "%tokenstore%" %nul%

set "d=$sddl = 'O:BAG:BAD:PAI(A;OICI;FA;;;SY)(A;OICI;FA;;;BA)(A;OICIIO;GR;;;BU)
(A;;FR;;;BU)(A;OICI;FA;;;S-1-5-80-123231216-2592883651-3715271367-3753151631-
4175906628)';"
set "d=!d! $AclObject = New-Object
System.Security.AccessControl.DirectorySecurity;"
set "d=!d! $AclObject.SetSecurityDescriptorSddlForm($sddl);"
set "d=!d! Set-Acl -Path %tokenstore% -AclObject $AclObject;"
%psc% "!d!" %nul%

for %%# in (
"HKLM:\SYSTEM\WPA_QueryValues, EnumerateSubKeys, WriteKey"
"HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\
SoftwareProtectionPlatform_SetValue"
) do for /f "tokens=1,2 delims=_" %%A in (%%#) do (
set "d=$acl = Get-Acl '%%A';"
set "d=!d! $rule = New-Object System.Security.AccessControl.RegistryAccessRule ('NT
Service\sppsvc', '%%B', 'ContainerInherit, ObjectInherit','None','Allow');"
set "d=!d! $acl.ResetAccessRule($rule);"
set "d=!d! $acl.SetAccessRule($rule);"
set "d=!d! Set-Acl -Path '%%A' -AclObject $acl"
%psc% "!d!" %nul%
)

call :checkperms
if defined permerror (
call :_color %Red% "[Failed To Fix]"
) else (
echo [Successfully Fixed]
)
) else (
echo [No Error Found]
)
)

echo:
echo Stopping sppsvc service...
call :_stopservice sppsvc

echo:
call :scandat delete
call :scandat check

if defined token (
echo:
call :_color %Red% "Failed to delete .dat files."
echo:
)

echo:
echo Reinstalling System Licenses [slmgr /rilc]...
cscript //nologo %windir%\system32\slmgr.vbs /rilc %nul%
if %errorlevel% NEQ 0 cscript //nologo %windir%\system32\slmgr.vbs /rilc %nul%
if %errorlevel% EQU 0 (
echo [Successful]
) else (
call :_color %Red% "[Failed]"
)

call :scandat check

echo:
if not defined token (
call :_color %Red% "Failed to rebuilt tokens.dat file."
) else (
echo tokens.dat file was rebuilt successfully.
)

::=================================================================================
=======================================================

:: Rebuild OSPP Tokens

echo:
echo %line%
echo:
call :_color %Blue% "Rebuilding OSPP Licensing Tokens"
echo:

sc qc osppsvc %nul% || (
echo OSPP based Office is not installed
echo Skipping rebuilding OSPP tokens...
goto :repairoffice
)

call :scandatospp check

if not defined token (

call :_color %Red% "tokens.dat file not found."
) else (
echo tokens.dat file: [%token%]
)

echo:
echo Stopping osppsvc service...
call :_stopservice osppsvc

echo:
call :scandatospp delete
call :scandatospp check

if defined token (
echo:
call :_color %Red% "Failed to delete .dat files."
echo:
)

echo:
echo Starting osppsvc service to generate tokens.dat
call :_startservice osppsvc
call :scandatospp check
if not defined token (
call :_stopservice osppsvc
call :_startservice osppsvc
timeout /t 3 %nul%
)

call :scandatospp check

echo:
if not defined token (
call :_color %Red% "Failed to rebuilt tokens.dat file."
) else (
echo tokens.dat file was rebuilt successfully.
)

::=================================================================================
=======================================================

:repairoffice

echo:
echo %line%
echo:
call :_color %Blue% "Repairing Office Licenses"
echo:

for /f "skip=2 tokens=2*" %%a in ('reg query "HKLM\SYSTEM\CurrentControlSet\

Control\Session Manager\Environment" /v PROCESSOR_ARCHITECTURE') do set arch=%%b

if /i "%arch%"=="ARM64" (
echo:
echo ARM64 Windows Found.
echo You need to use repair option in Windows settings for Office.
echo:
start ms-settings:appsfeatures
goto :repairend
)

if /i "%arch%"=="x86" (
set arch=X86
) else (
set arch=X64
)

for %%# in (68 86) do (

for %%A in (msi14 msi15 msi16 c2r14 c2r15 c2r16) do (set %%A_%%#=&set %%Arepair%
%#=)
)

set _68=HKLM\SOFTWARE\Microsoft\Office
set _86=HKLM\SOFTWARE\Wow6432Node\Microsoft\Office

%nul% reg query %_68%\14.0\Common\InstallRoot /v Path && (set "msi14_68=Office

14.0 MSI x86/x64" & set "msi14repair68=%systemdrive%\Program Files\Common Files\
microsoft shared\OFFICE14\Office Setup Controller\Setup.exe")
%nul% reg query %_86%\14.0\Common\InstallRoot /v Path && (set "msi14_86=Office
14.0 MSI x86" & set "msi14repair86=%systemdrive%\Program Files (x86)\Common
Files\Microsoft Shared\OFFICE14\Office Setup Controller\Setup.exe")
%nul% reg query %_68%\15.0\Common\InstallRoot /v Path && (set "msi15_68=Office
15.0 MSI x86/x64" & set "msi15repair68=%systemdrive%\Program Files\Common Files\
microsoft shared\OFFICE15\Office Setup Controller\Setup.exe")
%nul% reg query %_86%\15.0\Common\InstallRoot /v Path && (set "msi15_86=Office
15.0 MSI x86" & set "msi15repair86=%systemdrive%\Program Files (x86)\Common
Files\Microsoft Shared\OFFICE15\Office Setup Controller\Setup.exe")
%nul% reg query %_68%\16.0\Common\InstallRoot /v Path && (set "msi16_68=Office
16.0 MSI x86/x64" & set "msi16repair68=%systemdrive%\Program Files\Common Files\
Microsoft Shared\OFFICE16\Office Setup Controller\Setup.exe")
%nul% reg query %_86%\16.0\Common\InstallRoot /v Path && (set "msi16_86=Office
16.0 MSI x86" & set "msi16repair86=%systemdrive%\Program Files (x86)\Common
Files\Microsoft Shared\OFFICE16\Office Setup Controller\Setup.exe")
%nul% reg query %_68%\14.0\CVH /f Click2run /k && (set "c2r14_68=Office
14.0 C2R x86/x64" & set "c2r14repair68=")
%nul% reg query %_86%\14.0\CVH /f Click2run /k && (set "c2r14_86=Office
14.0 C2R x86" & set "c2r14repair86=")
%nul% reg query %_68%\15.0\ClickToRun /v InstallPath && (set "c2r15_68=Office
15.0 C2R x86/x64" & set "c2r15repair68=%systemdrive%\Program Files\Microsoft
Office 15\Client%arch%\integratedoffice.exe")
%nul% reg query %_86%\15.0\ClickToRun /v InstallPath && (set "c2r15_86=Office
15.0 C2R x86" & set "c2r15repair86=%systemdrive%\Program Files\Microsoft
Office 15\Client%arch%\integratedoffice.exe")
%nul% reg query %_68%\ClickToRun /v InstallPath && (set "c2r16_68=Office
16.0 C2R x86/x64" & set "c2r16repair68=%systemdrive%\Program Files\Microsoft
Office 15\Client%arch%\OfficeClickToRun.exe")
%nul% reg query %_86%\ClickToRun /v InstallPath && (set "c2r16_86=Office
16.0 C2R x86" & set "c2r16repair86=%systemdrive%\Program Files\Microsoft
Office 15\Client%arch%\OfficeClickToRun.exe")

set uwp16=
if %winbuild% GEQ 10240 (
%psc% "Get-AppxPackage -name "Microsoft.Office.Desktop"" | find /i "Office" %nul1%
&& set uwp16=Office 16.0 UWP
)

set /a counter=0
echo Checking installed Office versions...
echo:

for %%# in (
"%msi14_68%"
"%msi14_86%"
"%msi15_68%"
"%msi15_86%"
"%msi16_68%"
"%msi16_86%"
"%c2r14_68%"
"%c2r14_86%"
"%c2r15_68%"
"%c2r15_86%"
"%c2r16_68%"
"%c2r16_86%"
"%uwp16%"
) do (
if not "%%#"=="""" (
set insoff=%%#
set insoff=!insoff:"=!
echo [!insoff!]
set /a counter+=1
)
)

if %counter% GTR 1 (
%eline%
echo Multiple office versions found.
echo It's recommended to install only one version of office.
echo ________________________________________________________________
echo:
)

if %counter% EQU 0 (
echo:
echo Installed Office is not found.
goto :repairend
echo:
) else (
echo:
call :_color %_Yellow% "A Window will popup, in that Window you need to select
[Quick] Repair Option..."
call :_color %_Yellow% "Press any key to continue..."
echo:
pause %nul1%
)

if defined uwp16 (
echo:
echo Note: Skipping repair for Office 16.0 UWP.
echo You need to use reset option in Windows settings for it.
echo ________________________________________________________________
echo:
start ms-settings:appsfeatures
)

set c2r14=
if defined c2r14_68 set c2r14=1
if defined c2r14_86 set c2r14=1

if defined c2r14 (
echo:
echo Note: Skipping repair for Office 14.0 C2R
echo You need to use Repair option in Windows settings for it.
echo ________________________________________________________________
echo:
start appwiz.cpl
)

if defined msi14_68 if exist "%msi14repair68%" echo Running - "%msi14repair68%"

& "%msi14repair68%"
if defined msi14_86 if exist "%msi14repair86%" echo Running - "%msi14repair86%"
& "%msi14repair86%"
if defined msi15_68 if exist "%msi15repair68%" echo Running - "%msi15repair68%"
& "%msi15repair68%"
if defined msi15_86 if exist "%msi15repair86%" echo Running - "%msi15repair86%"
& "%msi15repair86%"
if defined msi16_68 if exist "%msi16repair68%" echo Running - "%msi16repair68%"
& "%msi16repair68%"
if defined msi16_86 if exist "%msi16repair86%" echo Running - "%msi16repair86%"
& "%msi16repair86%"
if defined c2r15_68 if exist "%c2r15repair68%" echo Running - "%c2r15repair68%"
REPAIRUI RERUNMODE & "%c2r15repair68%" REPAIRUI RERUNMODE
if defined c2r15_86 if exist "%c2r15repair86%" echo Running - "%c2r15repair86%"
REPAIRUI RERUNMODE & "%c2r15repair86%" REPAIRUI RERUNMODE
if defined c2r16_68 if exist "%c2r16repair68%" echo Running - "%c2r16repair68%"
scenario=Repair & "%c2r16repair68%" scenario=Repair
if defined c2r16_86 if exist "%c2r16repair86%" echo Running - "%c2r16repair86%"
scenario=Repair & "%c2r16repair86%" scenario=Repair

:repairend

echo:
echo %line%
echo:
echo:
call :_color %Green% "Finished"
goto :at_back

::=================================================================================
=======================================================

:fixwmi

cls
mode 98, 34
title Fix WMI

:: https://techcommunity.microsoft.com/t5/ask-the-performance-team/wmi-repository-
corruption-or-not/ba-p/375484

if exist "%SystemRoot%\Servicing\Packages\Microsoft-Windows-Server*Edition~*.mum" (
%eline%
echo WMI rebuild is not recommended on Windows Server. Aborting...
goto :at_back
)

for %%# in (wmic.exe) do @if "%%~$PATH:#"=="" (

%eline%
echo wmic.exe file is not found in the system. Aborting...
goto :at_back
)

echo:
echo Checking WMI
call :checkwmi

:: Apply basic fix first and check

if defined error (
call :_stopservice Winmgmt
winmgmt /salvagerepository %nul%
call :checkwmi
)

if not defined error (

echo [Working]
echo No need to apply this option. Aborting...
goto :at_back
)
call :_color %Red% "[Not Responding]"

set _corrupt=
sc start Winmgmt %nul%
if %errorlevel% EQU 1060 set _corrupt=1
sc query Winmgmt %nul% || set _corrupt=1
for %%G in (DependOnService Description DisplayName ErrorControl ImagePath
ObjectName Start Type) do if not defined _corrupt (reg query HKLM\SYSTEM\
CurrentControlSet\Services\Winmgmt /v %%G %nul% || set _corrupt=1)

echo:
if defined _corrupt (
%eline%
echo Winmgmt service is corrupted. Aborting...
goto :at_back
)

echo Disabling Winmgmt service

sc config Winmgmt start= disabled %nul%
if %errorlevel% EQU 0 (
echo [Successful]
) else (
call :_color %Red% "[Failed] Aborting..."
sc config Winmgmt start= auto %nul%
goto :at_back
)

echo:
echo Stopping Winmgmt service
call :_stopservice Winmgmt
call :_stopservice Winmgmt
call :_stopservice Winmgmt
sc query Winmgmt | find /i "STOPPED" %nul% && (
echo [Successful]
) || (
call :_color %Red% "[Failed]"
echo:
call :_color %Blue% "Its recommended to select [Restart] option and then apply Fix
WMI option again."
echo %line%
echo:
choice /C:21 /N /M "> [1] Restart [2] Revert Back Changes :"
if !errorlevel!==1 (sc config Winmgmt start= auto %nul%&goto :at_back)
echo:
echo Restarting...
shutdown -t 5 -r
exit
)

echo:
echo Deleting WMI repository
rmdir /s /q "%windir%\System32\wbem\repository\" %nul%
if exist "%windir%\System32\wbem\repository\" (
call :_color %Red% "[Failed]"
) else (
echo [Successful]
)
echo:
echo Enabling Winmgmt service
sc config Winmgmt start= auto %nul%
if %errorlevel% EQU 0 (
echo [Successful]
) else (
call :_color %Red% "[Failed]"
)

call :checkwmi
if not defined error (
echo:
echo Checking WMI
call :_color %Green% "[Working]"
goto :at_back
)

echo:
echo Registering .dll's and Compiling .mof's, .mfl's
call :registerobj %nul%

echo:
echo Checking WMI
call :checkwmi
if defined error (
call :_color %Red% "[Not Responding]"
echo:
echo Run [Dism RestoreHealth] and [SFC Scannow] options and make sure there are no
errors.
) else (
call :_color %Green% "[Working]"
)

goto :at_back

:registerobj

:: https://eskonr.com/2012/01/how-to-fix-wmi-issues-automatically/

call :_stopservice Winmgmt

cd /d %systemroot%\system32\wbem\
regsvr32 /s %systemroot%\system32\scecli.dll
regsvr32 /s %systemroot%\system32\userenv.dll
mofcomp cimwin32.mof
mofcomp cimwin32.mfl
mofcomp rsop.mof
mofcomp rsop.mfl
for /f %%s in ('dir /b /s *.dll') do regsvr32 /s %%s
for /f %%s in ('dir /b *.mof') do mofcomp %%s
for /f %%s in ('dir /b *.mfl') do mofcomp %%s

winmgmt /salvagerepository
winmgmt /resetrepository
exit /b

:checkwmi

:: https://learn.microsoft.com/en-us/windows/win32/wmisdk/wmi-error-constants
set error=
wmic path Win32_ComputerSystem get CreationClassName /value %nul2% | find /i
"computersystem" %nul1%
if %errorlevel% NEQ 0 (set error=1& exit /b)
winmgmt /verifyrepository %nul%
if %errorlevel% NEQ 0 (set error=1& exit /b)

cscript //nologo %windir%\system32\slmgr.vbs /dlv %nul%

cmd /c exit /b %errorlevel%
echo "0x%=ExitCode%" | findstr /i "0x800410 0x800440" %nul1%
if %errorlevel% EQU 0 set error=1
exit /b

::=================================================================================
=======================================================

:at_back

echo:
echo %line%
echo:
call :_color %_Yellow% "Press any key to go back..."
pause %nul1%
goto :at_menu

::=================================================================================
=======================================================

:at_done

echo:
echo Press any key to %_exitmsg%...
pause %nul1%
exit /b

::=================================================================================
=======================================================

:compresslog

:: https://stackoverflow.com/a/46268232

set "ddf="%SystemRoot%\Temp\ddf""
%nul% del /q /f %ddf%
echo/.New Cabinet>%ddf%
echo/.set Cabinet=ON>>%ddf%
echo/.set CabinetFileCountThreshold=0;>>%ddf%
echo/.set Compress=ON>>%ddf%
echo/.set CompressionType=LZX>>%ddf%
echo/.set CompressionLevel=7;>>%ddf%
echo/.set CompressionMemory=21;>>%ddf%
echo/.set FolderFileCountThreshold=0;>>%ddf%
echo/.set FolderSizeThreshold=0;>>%ddf%
echo/.set GenerateInf=OFF>>%ddf%
echo/.set InfFileName=nul>>%ddf%
echo/.set MaxCabinetSize=0;>>%ddf%
echo/.set MaxDiskFileCount=0;>>%ddf%
echo/.set MaxDiskSize=0;>>%ddf%
echo/.set MaxErrors=1;>>%ddf%
echo/.set RptFileName=nul>>%ddf%
echo/.set UniqueFiles=ON>>%ddf%
for /f "tokens=* delims=" %%D in ('dir /a:-D/b/s "%SystemRoot%\logs\%1"') do (
echo/"%%~fD" /inf=no;>>%ddf%
)
makecab /F %ddf% /D DiskDirectory1="" /D CabinetNameTemplate="!desktop!\AT_Logs\%2_
%_time%.cab"
del /q /f %ddf%
exit /b

::=================================================================================
=======================================================

:_stopservice

for %%# in (%1) do (

sc query %%# | find /i "STOPPED" %nul% || net stop %%# /y %nul%
sc query %%# | find /i "STOPPED" %nul% || sc stop %%# %nul%
)
exit /b

:_startservice

for %%# in (%1) do (

sc query %%# | find /i "RUNNING" %nul% || net start %%# /y %nul%
sc query %%# | find /i "RUNNING" %nul% || sc start %%# %nul%
)
exit /b

::=================================================================================
=======================================================

:checkperms

set permerror=
if not exist "%tokenstore%\" set permerror=1

for %%# in (
"%tokenstore%"
"HKLM:\SYSTEM\WPA"
"HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform"
) do if not defined permerror (
%psc% "$acl = Get-Acl '%%#'; if ($acl.Access.Where{ $_.IdentityReference -eq 'NT
SERVICE\sppsvc' -and $_.AccessControlType -eq 'Deny' -or
$acl.Access.IdentityReference -notcontains 'NT SERVICE\sppsvc'}) {Exit 2}" %nul%
if !errorlevel!==2 set permerror=1
)
exit /b

::=================================================================================
=======================================================

:scandat

set token=
for %%# in (
%Systemdrive%\Windows\System32\spp\store_test\2.0\
%Systemdrive%\Windows\System32\spp\store\
%Systemdrive%\Windows\System32\spp\store\2.0\
%Systemdrive%\Windows\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\
SoftwareProtectionPlatform\
) do (

if %1==check (
if exist %%#tokens.dat set token=%%#tokens.dat
)

if %1==delete (
if exist %%# (
%nul% dir /a-d /s "%%#*.dat" && (
attrib -r -s -h "%%#*.dat" /S
del /S /F /Q "%%#*.dat"
)
)
)
)
exit /b

:scandatospp

set token=
for %%# in (
%ProgramData%\Microsoft\OfficeSoftwareProtectionPlatform\
) do (

if %1==check (
if exist %%#tokens.dat set token=%%#tokens.dat
)

if %1==delete (
if exist %%# (
%nul% dir /a-d /s "%%#*.dat" && (
attrib -r -s -h "%%#*.dat" /S
del /S /F /Q "%%#*.dat"
)
)
)
)
exit /b

::=================================================================================
=======================================================

:regownstart

%psc% "$f=[io.file]::ReadAllText('!_batp!') -split ':regown\:.*';iex ($f[1]);"

exit /b

:: Below code takes ownership of a volatile registry key and deletes it

:: HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ClipSVC\Volatile\
PersistedSystemState

:regown:
$AssemblyBuilder = [AppDomain]::CurrentDomain.DefineDynamicAssembly(4, 1)
$ModuleBuilder = $AssemblyBuilder.DefineDynamicModule(2, $False)
$TypeBuilder = $ModuleBuilder.DefineType(0)

$TypeBuilder.DefinePInvokeMethod('RtlAdjustPrivilege', 'ntdll.dll', 'Public,

Static', 1, [int], @([int], [bool], [bool], [bool].MakeByRefType()), 1, 3) | Out-
Null
$TypeBuilder.CreateType()::RtlAdjustPrivilege(9, $true, $false, [ref]$false) | Out-
Null

$SID = New-Object System.Security.Principal.SecurityIdentifier('S-1-5-32-544')

$IDN = ($SID.Translate([System.Security.Principal.NTAccount])).Value
$Admin = New-Object System.Security.Principal.NTAccount($IDN)

$path = 'SOFTWARE\Microsoft\Windows NT\CurrentVersion\ClipSVC\Volatile\

PersistedSystemState'
$key = [Microsoft.Win32.RegistryKey]::OpenBaseKey('LocalMachine',
'Registry64').OpenSubKey($path, 'ReadWriteSubTree', 'takeownership')

$acl = $key.GetAccessControl()
$acl.SetOwner($Admin)
$key.SetAccessControl($acl)

$rule = New-Object
System.Security.AccessControl.RegistryAccessRule($Admin,"FullControl","Allow")
$acl.SetAccessRule($rule)
$key.SetAccessControl($acl)
:regown:

::=================================================================================
=======================================================

:_color

if %_NCS% EQU 1 (
echo %esc%[%~1%~2%esc%[0m
) else (
call :batcol %~1 "%~2"
)
exit /b

:_color2

if %_NCS% EQU 1 (
echo %esc%[%~1%~2%esc%[%~3%~4%esc%[0m
) else (
call :batcol %~1 "%~2" %~3 "%~4"
)
exit /b

::=======================================

:: Colored text with pure batch method

:: Thanks to @dbenham and @jeb
:: stackoverflow.com/a/10407642

:batcol

pushd %_coltemp%
if not exist "'" (<nul >"'" set /p "=.")
setlocal
set "s=%~2"
set "t=%~4"
call :_batcol %1 s %3 t
del /f /q "'"
del /f /q "`.txt"
popd
exit /b

:_batcol

setlocal EnableDelayedExpansion
set "s=!%~2!"
set "t=!%~4!"
for /f delims^=^ eol^= %%i in ("!s!") do (
if "!" equ "" setlocal DisableDelayedExpansion
>`.txt (echo %%i\..\')
findstr /a:%~1 /f:`.txt "."
<nul set /p "=%_BS%%_BS%%_BS%%_BS%%_BS%%_BS%%_BS%"
)
if "%~4"=="" echo(&exit /b
setlocal EnableDelayedExpansion
for /f delims^=^ eol^= %%i in ("!t!") do (
if "!" equ "" setlocal DisableDelayedExpansion
>`.txt (echo %%i\..\')
findstr /a:%~3 /f:`.txt "."
<nul set /p "=%_BS%%_BS%%_BS%%_BS%%_BS%%_BS%%_BS%"
)
echo(
exit /b

::=======================================

:_colorprep

if %_NCS% EQU 1 (
for /F %%a in ('echo prompt $E ^| cmd') do set "esc=%%a"

set "Red="41;97m""
set "Gray="100;97m""
set "Black="30m""
set "Green="42;97m""
set "Blue="44;97m""
set "Yellow="43;97m""
set "Magenta="45;97m""

set "_Red="40;91m""
set "_Green="40;92m""
set "_Blue="40;94m""
set "_White="40;37m""
set "_Yellow="40;93m""

exit /b
)

for /f %%A in ('"prompt $H&for %%B in (1) do rem"') do set "_BS=%%A %%A"
set "_coltemp=%SystemRoot%\Temp"

set "Red="CF""
set "Gray="8F""
set "Black="00""
set "Green="2F""
set "Blue="1F""
set "Yellow="6F""
set "Magenta="5F""

set "_Red="0C""
set "_Green="0A""
set "_Blue="09""
set "_White="07""
set "_Yellow="0E""

exit /b

::=================================================================================
=======================================================
:: Leave empty line below