Grade 9

Sanchez Mira National High School
1st Quarter Exam.
T L E Grade 9
l. DIRECTION: Choose the letter of the best answer and write your answer in your answer sheet.
1. A small drilling machine with a chuck of ¼” and 3/8”. It is used to bore holes on lighter
metal work. A. portable grinder b. portable electri drill c. pipe bender
d. hydraulic knockout set
2. A machine tools used for several function including grinding and cutting processes
depending on the type of disc fitted to the machine.
a. Hydraulic pipe bender b. hydraulic pump c.electric drill d. portable grinder
3. A power tools used for bending conduit at various angle.
a. hydraulic pump b. hydraulic pipe bender c. electric drill d. grinder
4. A power tools used for boring holes on metal enclosures.
a. hydraulic pump b. hydraulic knockout set c. hydraulic pipe bender
d. hydraulic crimper
5. Used for splicing conductor easily.
a. die less hydraulic crimper b. electrical plier c. bender d. grinder
6. Which area should be avoided when grinding with the portable disc grinder?
a. an open area b. an area w/ wide space c. an area w/ open windows
d. area that contains flammables or combustible gases
7. How would you identify that proper PPE is being applied when operating the portable
disc grinder ? a. the operator is wearing safety glasses
b.the operator is wearing safety glasses and hearing protection
c. Wearing safety glasses, hearing protection and respirator
d. wearing safety glasses, hearing protection, gloves and respirator
8. Why should you handle the disc grinder during operation in manner that sparks and grit are
thrown? a. This is to avoid hitting the operator
b. this is to avoid hitting the ground and the working area
c. this is to avoid hitting the operator and others in the work area
d. this is to avoid hitting the ground, walls and the working area
9. How can you avoid hand and finger fatigue when using the portable disc grinder for
extended period of time. a. use the switch lock b. drink plenty of water
c. eat lots of carbohydrates d. wear long sleeved gloves
10. Predict what will happen when electric and hydraulic tools are not properly stored?
a. lesser life span of tools b. it may lead to work shop accidents
c. lesser work efficacy is expected d. all of the above
11. It prevents the electrical cord to suffer from strain during and after operation.
a. pistol grip b. electrical cord c. switch lock d. cord strain reliever
12. A button which can keep the switch in the ON position.
a. trigger switch b. reversing switch c. electrical cord d. switch lock
13. A switch used to reverse the rotation of the drill from forward to reverse rotation and vice
versa. a. chuck b. pistol grip c. reversing switch d. switch lock
14. These are cutting tools mounted at the chuck of electric drill used to remove material to
create holes. a. drill bits b. pistol grip c. chuck d. cord
15 .It is held the operator when operating for better performance.
a. guard b. handle c. grinding disc d. switch lock
16. A metallic covering used in trapping the chips flying from the work piece.
a. tool rest b .handle c. guard d. spindle
17. It is used to attach the grinding disc to the rotor of the motor.
a. locking nut b. spindle c. switch lock d. tool rest
18. A nut used to hold/ lock the grinding disc firmly to avoid accident
a. switch lock b. handle c. locking nut d. guard
19. It is considered to be the heart of tool where in it houses the hydraulic oil.
a. hydraulic pump b. hydraulic hose c. ram travel gauge d .hydraulic ram
20. A high pressure resistant hose where the hydraulic oil travel from the hydraulic pump to
hydraulic ram. a. hydraulic pump b. hydraulic hose c. hydraulic ram d. bender shoe
21. When laying the portable disc grinder down, always position it on ____________.
a. tool rest b. guard c. handle d. switch lock
22. After switching On to start an extended operation, you have to press the button of the _
________ to keep the switch in the ON position.
a. Tool rest b. guard c. electric cord d. switch lock
23. You must hold firmly the_______ when operating the motor for better performance.
a. tool rest b. handle c. switch lock d. guard
24. Always mount the _______ in order to trap the flying chips from the workplace.
a. tool rest b. guard c. switch lock d. electric cord
25. You must keep the electrical and extension cords away from the grinding area. The ___
can be damaged by the portable disc grinder.
a. Guard b. electrical cord c. switch lock d. handle
II. IDENTIFY the Parts of Portable ELECTRIC DRILL.
Portable GRINDER
Hydraulic PIPE BENDER

Grade 9

Uploaded by

Copyright:

Available Formats

Grade 9

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Grade 9

Uploaded by

Copyright:

Available Formats

Sanchez Mira National High School

1st Quarter Exam.

II. IDENTIFY the Parts of Portable ELECTRIC DRILL.

Hydraulic PIPE BENDER

You might also like