Scribd Logo
Upload

Welcome to Scribd!

  • 20 views

    PR 3103

    Uploaded by

    Américo Alves
    The 3103 isolated repeater provides galvanic isolation and 1:1 conversion of standard current signals with a response time of less than 7 ms. It has a slimline housing of 6 mm and is a low cost and simple solution that requires no setup. It can isolate and convert analog current signals, eliminate ground loops, and measure floating signals for applications such as SCADA systems and PLC equipment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PR 3103

    Uploaded by

    Américo Alves
    20 views2 pages
    The 3103 isolated repeater provides galvanic isolation and 1:1 conversion of standard current signals with a response time of less than 7 ms. It has a slimline housing of 6 mm and is a low cost and simple solution that requires no setup. It can isolate and convert analog current signals, eliminate ground loops, and measure floating signals for applications such as SCADA systems and PLC equipment.

    Original Title

    PR-3103

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The 3103 isolated repeater provides galvanic isolation and 1:1 conversion of standard current signals with a response time of less than 7 ms. It has a slimline housing of 6 mm and is a low cost and simple solution that requires no setup. It can isolate and convert analog current signals, eliminate ground loops, and measure floating signals for applications such as SCADA systems and PLC equipment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    20 views2 pages

    PR 3103

    Uploaded by

    Américo Alves
    The 3103 isolated repeater provides galvanic isolation and 1:1 conversion of standard current signals with a response time of less than 7 ms. It has a slimline housing of 6 mm and is a low cost and simple solution that requires no setup. It can isolate and convert analog current signals, eliminate ground loops, and measure floating signals for applications such as SCADA systems and PLC equipment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Isolated repeater

    3103
    – Isolation and 1:1 conversion of standard current signals
    – Slimline housing of 6 mm
    – Response time < 7 ms
    – Low cost
    – Simple - no setup needed

    Application
    Applications
    • Isolation and 1:1 conversion of standard current signals.
    • Galvanic separation of analog current signals.
    • Elimination of ground loops and measurement of floating
    signals.
    • A competitive choice in terms of both price and technology for
    galvanic isolation of current signals to SCADA systems or
    PLC equipment.
    • Installation in ATEX Ex zone 2 / IECEx Zone 2 / FM division
    2.
    • Suitable for environments with high vibration stress, e.g.
    ships.

    Technical characteristics
    • The input is protected against overvoltage and polarity error.
    • Factory-calibrated measurement ranges.
    • Inputs and outputs are floating and galvanically separated.

    This page is automatically generated on the basis of information provided on www.prelectronics.com and affiliated websites. It is provided to you as a service and for information
    purpose only. While we have attempted to maintain the information as accurately as possible, the page may contain errors or omissions for which we disclaim any and all liability
    Environmental Conditions Output specifications
    Operating temperature................................... -25°C to +70°C Current output
    Storage temperature...................................... -40°C to +85°C Signal range................................................... 0...23 mA
    Calibration temperature................................. 20...28°C Load (@ current output)................................. ≤ 600 Ω
    Relative humidity............................................ < 95% RH (non-cond.) Load stability.................................................. ≤ 0.002% of span / 100 Ω
    Protection degree........................................... IP20 Current limit.................................................... ≤ 28 mA
    Installation in.................................................. Pollution degree 2 & meas. /
    overvoltage cat. II of span........................................................... = 0...20 mA

    Mechanical specifications I.S. / Ex marking


    Dimensions (HxWxD)..................................... 113 x 6.1 x 115 mm ATEX.............................................................. II 3 G Ex ec IIC T4 Gc
    Weight approx................................................ 70 g IECEx............................................................. Ex ec IIC T4 Gc
    DIN rail type................................................... DIN EN 60715/35 mm FM, US........................................................... Cl. I, Div. 2, Gp. A, B, C, D T4
    Wire size........................................................ 0.13...2.5 mm2 / AWG 26...12 or Cl. I, Zone 2, AEx nA IIC T4
    stranded wire FM, CA........................................................... Cl. I, Div. 2, Gp. A, B, C, D T4
    Screw terminal torque.................................... 0.5 Nm or Cl. I, Zone 2, Ex nA IIC T4
    Vibration......................................................... IEC 60068-2-6 EAC Ex........................................................... 2Ex nA IIC T4 Gc X
    2...25 Hz......................................................... ±1.6 mm
    25...100 Hz..................................................... ±4 g Observed authority requirements
    EMC............................................................... 2014/30/EU
    Common specifications LVD................................................................ 2014/35/EU
    Supply ATEX.............................................................. 2014/34/EU
    Supply voltage............................................... 16.8...31.2 VDC RoHS.............................................................. 2011/65/EU
    Max. required power...................................... 0.65 W EAC................................................................ TR-CU 020/2011
    Max. power dissipation.................................. 0.60 W EAC Ex........................................................... TR-CU 012/2011

    Isolation voltage Approvals


    Isolation voltage, test / ATEX.............................................................. KEMA 10ATEX0147 X
    working........................................................... 2.5 kVAC / 300 VAC IECEx............................................................. KEM 10.0068X
    (reinforced)
    c FM us.......................................................... FM17US0004X /
    Zone 2 / Div. 2................................................ 250 VAC FM17CA0003X
    Response time c UL us, UL 61010-1..................................... E314307
    Response time (0...90%, 100...10%)............. < 7 ms CCC............................................................... 2020322310003554
    EAC Ex........................................................... RU C-DK.HA65.B.00355/19
    Signal / noise ratio......................................... > 60 dB DNV Marine.................................................... TAA00001RW
    Cut-off frequency (3 dB)................................. > 100 Hz
    Signal dynamics, input................................... Analog signal chain
    Signal dynamics, output................................. Analog signal chain
    Accuracy........................................................ Better than 0.05%
    Temperature coefficient................................. < ±0.01% of span / °C
    EMC immunity influence................................ < ±0.5% of span
    Extended EMC immunity: NAMUR
    NE21, A criterion, burst.................................. < ±1% of span

    Input specifications
    Current input
    Measurement range....................................... 0...23 mA
    Input voltage drop.......................................... < 1.5 VDC
    3103-090221

    You might also like