Vertical multistage electric pumps

HT- PRO Clean water

Agricultural use
Vertical multistage electric pumps
Civic use

STAINLESS STEEL Industrial use

※ Made entirely of stainless steel: Pump body,

seal holder cover, impellers and diffusers made
of AISI 304 stainless steel.

※ Robust, compact and efficient: HT-PRO mul-

tistage electric pumps have been designed
with the aid of special structured fluid-dynamic
calculation software in order to guarantee high
levels of hydraulic performance combined with a
simple, robust, compact and reliable mechanical
construction.

※ Superior reliability and minimal operating

costs

※ Hydraulics with efficiency indexes MEI ≥ 0.4

※ Motor shaft: AISI 316 stainless steel

※ Mechanical seal: Standard version with ceram-

ic – graphite and NBR elastomer sliding faces.
Available with sliding faces made of silicon car-
bide and EPDM and VITON elastomers.

※ O-rings: NBR standard version.

EPDM and VITON available.

PERFORMANCE RANGE anced and quiet operation. Efficiency class IE3, insulation class F and
• Flow rate up to 800 l/min (48 m³/h) protection IPX4. The CERAMIC – GRAPHITE – NBR mechanical seal
• Head up to 160 m allows reliable and smooth operation over a long period of time.

APPLICATION LIMITS OPTIONS AVAILABLE ON REQUEST

• Manometric suction lift up to 7 m • Other voltages or 60 Hz frequency
• Liquid temperature between -15°C and +90°C • Pump made of AISI 316 stainless steel
• Ambient temperature up to +40°C • For liquids with higher or lower temperatures (MAX 110°C)
• Max. working pressure 16 bar • Pump body with NPT ANSI B 1.20.1 threaded ports
• Continuous service S1 • Kit for dry running protection

INSTALLATION AND USE WARRANTY

Suitable for a water supply, for transferring clean liquids, and for 2 years as per our general terms and conditions of sale
pressurizing civic, industrial and agricultural plants. The multi-stage
construction ensures very low operating noise thresholds. The newly
designed electric motor, made to work with inverters, features bal-
PERFORMANCE RANGE 50 Hz n= 2900 min-1 HS= 0 m
0 50 100 150 200 US g.p.m.
0 50 100 150 Imp g.p.m.
180 feet

170

160

500
150

140

130

400
120

110
Head H (metres) 4

100

300
90

80

70

HT 3-PRO HT 15-PRO HT 30-PRO

60 200

50

40
HT 5-PRO

30 HT 8-PRO 100

20

10

0 0
0 100 200 300 400 500 600 700 800 l/min
0 5 10 15 20 25 30 35 40 45 50 m³/h
Flow rate Q 4
HT 3 - PRO
CHARACTERISTIC CURVES AND PERFORMANCE DATA 50 Hz n= 2900 min-1 HS= 0 m
0 5 10 15 20 US g.p.m.

0 5 10 15 20 Imp g.p.m.
120 feet
HT 3/7-PRO
110
η = 42%
100 HT 3/6-PRO
300
90 38
HT 3/5-PRO
80
Head H (metres) 4

70
HT 3/4-PRO

H (feet)
60 200

23
50

40

30 100

20

10
MEI≥ 0.40
0 0
0 10 20 30 40 50 60 70 80 90 l/min
0 1 2 3 4 5 m³/h
4
NPSH (metres)

NPSH (feet)
3 10

2
5
1
0.4
0.5
Absorbed power P2 (kW)

0.35

0.3 0.4 P2 (HP)

0.25
0.3
0.2

0.15 0.2

0.1
0 10 20 30 40 50 60 70 80 90 l/min
Flow rate Q 4

MODEL POWER (P2) m³/h 0 0.3 0.6 1.2 2.4 3.6 4.8 5.4
Q
Single phase Three phase kW HP  l/min 0 5 10 20 40 60 80 90

HTm 3/4 - PRO HT 3/4 - PRO 0.75 1 64 63 61.5 59 53 45.5 36 30.5

HTm 3/5 - PRO HT 3/5 - PRO 1.1 1.5 80 79 77 74 66.5 57 45 38

IE3 H metres
HTm 3/6 - PRO HT 3/6 - PRO 1.5 2 96 94 92 89 80 68.5 54 45.5

HTm 3/7 - PRO HT 3/7 - PRO 1.8 2.5 112 110 108 103 93 80 63 53

Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3B

 Three-phase motor efficiency class (IEC 60034-30-1)

HT 5 - PRO
CHARACTERISTIC CURVES AND PERFORMANCE DATA 50 Hz n= 2900 min-1 HS= 0 m
0 10 20 30 US g.p.m.

0 10 20 Imp g.p.m.
110 feet

100 HT 5/6-PRO η = 49%

300
90
HT 5/5-PRO 43.5
80
Head H (metres) 4

70
HT 5/4-PRO
200

H (feet)
60

HT 5/3-PRO
50
22.5
40
HT 5/2-PRO
30 100

20

10
MEI≥ 0.40
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 l/min
0 1 2 3 4 5 6 7 8 m³/h
4
NPSH (metres)

NPSH (feet)
3 10

2
5
1
0.5
Absorbed power P2 (kW)

0.6

0.4
0.5
P2 (HP)
0.3 0.4

0.3
0.2
0.2

0.1
0 10 20 30 40 50 60 70 80 90 100 110 120 130 l/min
Flow rate Q 4

MODEL POWER (P2) m³/h 0 0.3 0.6 1.2 2.4 3.6 4.8 5.4 6 7.8
Q
Single phase Three phase kW HP  l/min 0 5 10 20 40 60 80 90 100 130

HTm 5/2 - PRO HT 5/2 - PRO 0.75 1 33 33 32.7 32.3 30.5 28.5 25.5 24 22.2 16

HTm 5/3 - PRO HT 5/3 - PRO 1.1 1.5 49 49 48.5 47.5 45.5 42 37.5 35 32.5 24

HTm 5/4 - PRO HT 5/4 - PRO 1.5 2 IE3 H metres 65 65 64.5 63.5 60.5 56 50.5 47 43.5 32

HTm 5/5 - PRO HT 5/5 - PRO 1.8 2.5 81 81 80.5 79 76 70 63 58.5 54 39

HTm 5/6 - PRO HT 5/6 - PRO 2.2 3 98 97 97 95 91 84 75 70 65 47

Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3B

 Three-phase motor efficiency class (IEC 60034-30-1)

HT 8 - PRO
CHARACTERISTIC CURVES AND PERFORMANCE DATA 50 Hz n= 2900 min-1 HS= 0 m
0 10 20 30 40 50 US g.p.m.

0 10 20 30 40 Imp g.p.m.
100 feet

η = 53% 300
90
HT 8/6-PRO

80
HT 8/5-PRO
70
Head H (metres) 4

60 200
HT 8/4-PRO
35.5

H (feet)
50
HT 8/3-PRO
40

20
30 100

20

10
MEI≥ 0.40
0 0
0 20 40 60 80 100 120 140 160 180 200 l/min
0 1 2 3 4 5 6 7 8 9 10 11 12 m³/h
10
30
NPSH (metres)

NPSH (feet)
6 20
4
2 10
0
0.5
Absorbed power P2 (kW)

0.6

0.4
0.5

P2 (HP)
0.3 0.4

0.3
0.2
0.2

0.1
0 20 40 60 80 100 120 140 160 180 200 l/min
Flow rate Q 4

MODEL POWER (P2) m³/h 0 1.2 2.4 3.6 4.8 6.0 7.2 8.4 9.6 10.8 12.0
Q
Single phase Three phase kW HP  l/min 0 20 40 60 80 100 120 140 160 180 200

HTm 8/3 - PRO HT 8/3 - PRO 1.1 1.5 44 43 41.5 39.5 37 34 30.5 26.8 22.6 17.9 13

HTm 8/4 - PRO HT 8/4 - PRO 1.5 2 58 58 55 52.5 49.5 45.5 41 35.5 30 23.9 18
IE3 H metres
HTm 8/5 - PRO HT 8/5 - PRO 1.8 2.5 73 71.5 69 66 61.5 57 51 44.5 37.5 30 21.5

HTm 8/6 - PRO HT 8/6 - PRO 2.2 3 87 85.5 83 79 74 68 61.5 53.5 45 36 26

Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3B

 Three-phase motor efficiency class (IEC 60034-30-1)

HT 15 - PRO
CHARACTERISTIC CURVES AND PERFORMANCE DATA 50 Hz n= 2900 min-1 HS= 0 m
0 25 50 75 100 US g.p.m.

0 25 50 75 Imp g.p.m.
180 feet

HT 15/7-PRO η = 62%
160
500

140 HT 15/6-PRO

50
120 HT 15/5-PRO 400
Head H (metres) 4

100

H (feet)
HT 15/4-PRO
300

80 29
HT 15/3-PRO

60 200
HT 15/3R-PRO

40 HT 15/2R-PRO
100

20

MEI≥ 0.40
0 0
0 50 100 150 200 250 300 350 400 l/min
0 5 10 15 20 25 m³/h
4
NPSH (metres)

NPSH (feet)
3 10

2
5
1
1.6
2
Absorbed power P2 (kW)

1.4 15/3
15/4
1.2 15/5
15/6 1.5
15/7 P2 (HP)
1.0

0.8 15/2R 1
15/3R
0.6

0.4
0 50 100 150 200 250 300 350 400 l/min
Flow rate Q 4

MODEL POWER (P2) m³/h 0 3 6 12 18 21 24

Q
Three phase kW HP  l/min 0 50 100 200 300 350 400
HT 15/2R - PRO 2.2 3 44 43 41.5 36.5 27.5 20.5 –
HT 15/3R - PRO 3 4 64.5 62.5 60.5 52.0 37.5 27 –
HT 15/3 - PRO 4 5.5 72 70 68.5 61 48 38.5 27
HT 15/4 - PRO 5.5 7.5 IE3 H metres 96 94 91 81 64 51.5 36
HT 15/5 - PRO 7.5 10 120 117 114 102 80 64.5 45
HT 15/6 - PRO 9.2 12.5 140 137 133 119 94 75.5 52.5
HT 15/7 - PRO 9.2 12.5 – 160 155 139 109 88 61.5
Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3B

 Three-phase motor efficiency class (IEC 60034-30-1)

HT 30 - PRO
CHARACTERISTIC CURVES AND PERFORMANCE DATA 50 Hz n= 2900 min-1 HS= 0 m
0 50 100 150 200 US g.p.m.

0 50 100 150 Imp g.p.m.

180 feet

160 HT 30/8-PRO η = 68%

500

140 HT 30/7-PRO
Prevalenza H (metres) 4

HT 30/6-PRO 400
120

100 HT 30/5-PRO

H (feet)
300

80 HT 30/4-PRO
34 34

60 HT 30/3-PRO 200

40 HT 30/2-PRO
100
HT 30/2R-PRO
20

MEI≥ 0.40
0 0
0 100 200 300 400 500 600 700 800 l/min
0 10 20 30 40 50 m³/h
5
15
NPSH (metres)

NPSH (feet)
3 10

2
5
1
0 0
1.8
30/2 2
Absorbed power P2 (kW)

1.6 30/3
30/4
30/2R 30/5
1.4 30/6
30/7 1.5 P2 (HP)
1.2

1.0
1
0.8

0.6
0 100 200 300 400 500 600 700 800 l/min
Flow rate Q 4

MODEL POWER (P2) m³/h 0 6 12 18 24 36 42 48

Q
Three phase kW HP  l/min 0 100 200 300 400 600 700 800
HT 30/2R - PRO 3 4 35 34 33 31 28 17.6 10 –
HT 30/2 - PRO 4 5.5 40 39 37.5 35 31.5 22 15.7 8
HT 30/3 - PRO 5.5 7.5 60 58.5 56 52.5 47.5 33 23.5 12
HT 30/4 - PRO 7.5 10 80 78 75 70 63 44 31.3 16
IE3 H metres
HT 30/5 - PRO 9.2 12.5 100 98 93 87 79 55 39 20
HT 30/6 - PRO 11 15 120 117 112 105 95 66.5 47 24
HT 30/7 - PRO 15 20 137 134 128 120 108 76 53.5 27.5
HT 30/8 - PRO 15 20 158 154 147 138 125 87 62 31.5
Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3B

 Three-phase motor efficiency class (IEC 60034-30-1)

POS. COMPONENT CONSTRUCTION CHARACTERISTICS

1 PUMP BODY AISI 304 stainless steel with threaded ports in compliance
with ISO 228/1
8

2 SEAL HOLDER COVER AISI 304 stainless steel

3 LINER AISI 304 stainless steel

4 IMPELLERS AISI 304 stainless steel

5 DIFFUSERS AISI 304 stainless steel 6

6 PUMP SHAFT AISI 316L stainless steel

2

7 MECHANICAL SEAL
7
Electric pump Seal Shaft Materials
Model Model Diameter Stationary ring Rotational ring Elastomer Spring
HT 3 - PRO
HT 5 - PRO FN-18 Ø 18 mm Graphite Ceramic NBR AISI 304
HT 8 - PRO
FN-KU-24
HT 15 - PRO
ISO 3069 Ø 24 mm Graphite Ceramic NBR AISI 304
HT 30 - PRO 4
EN 12756

– BEARINGS
5
Electric pump Model
HT 3 - PRO
HT 5 - PRO 6304 2RS-C3 / 6204 ZZ-C3E
HT 8 - PRO
HT 15 - PRO / HT 30 - PRO up to 7.5 kW - 6307 ZZ - C3 / 6206 ZZ-C3
HT 15 - PRO / HT 30 - PRO from 9.2 kW - 3309 A - 2RS1 / 6308 ZZ-C3

8 ELECTRIC MOTOR
3
– HTm - PRO: Single phase
230 V - 50 Hz
with condenser and thermal overload protector incorporated into the winding

– HT - PRO: Three phase

230/400 V - 50 Hz up to 4 kW
400/690 V - 50 Hz from 5.5 to 15 kW
➠ The three phase pumps are fitted with high performance motors in class IE3 (IEC
60034-30-1)
– Insulation: class F
– Protection: IP X4

1
HT - PRO
DIMENSIONS AND WEIGHT

MADE IN ITALY

PUMP Rel.
Q l/min H m
H min m t max °C
3~ P2 kW- HP Hz
min-1 I.CL. IP

V V
W2 U2 V2 W2 U2 V2
A A
U1 V1 W1 U1 V1 W1

120000DIE3
San Bonifacio (VR) ITALY
Tel. 045 6136311
www.pedrollo.com
EFFICIENCY CLASS IE3
h

m n1
4 holes

DN2
DN1

n2
e
h1

a f

d
b c

MODEL PORTS DIMENSIONS mm kg

Single phase Three phase DN1 DN2 a b c d e f h h1 n1 n2 m 1~ 3~

HTm 3/4 - PRO HT 3/4 - PRO 509 32.0 31.5
HTm 3/5 - PRO HT 3/5 - PRO 535 32.2 31.7
1" 1"
HTm 3/6 - PRO HT 3/6 - PRO 561 32.9 33.8
HTm 3/7 - PRO HT 3/7 - PRO 607 37.9 37.9
HTm 5/2 - PRO HT 5/2 - PRO 250 212 457 75 29.9 29.9
HTm 5/3 - PRO HT 5/3 - PRO 483 30.1 30.1
HTm 5/4 - PRO HT 5/4 - PRO 1¼" 1¼" 126 231 15 210 509 100 180 Ø 13 32.0 32.1
HTm 5/5 - PRO HT 5/5 - PRO 555 35.7 35.8
HTm 5/6 - PRO HT 5/6 - PRO 581 36.8 36.8
HTm 8/3 - PRO HT 8/3 - PRO 488 30.6 30.6
HTm 8/4 - PRO HT 8/4 - PRO 514 32.5 32.6
1½" 1½" 280 240 80
HTm 8/5 - PRO HT 8/5 - PRO 560 36.2 36.1
HTm 8/6 - PRO HT 8/6 - PRO 586 36.9 36.9
– HT 15/2R - PRO 589 – 48.0
– HT 15/3R - PRO – 48.2
633
– HT 15/3 - PRO 151 275 – 48.6
– HT 15/4 - PRO 2" 2" 300 260 677 90 – 66.1
– HT 15/5 - PRO 771 – 74.3
– HT 15/6 - PRO 900 – 138.5
181 305
– HT 15/7 - PRO 944 – 139.0
– HT 30/2R - PRO 18 247 130 215 Ø 14 – 50.1
604
– HT 30/2 - PRO – 50.2
151 275
– HT 30/3 - PRO 648 – 56.5
– HT 30/4 - PRO 2½" 2½" 742 – 64.3
320 274 105
– HT 30/5 - PRO 871 – 141.0
– HT 30/6 - PRO 915 – 141.5
181 305
– HT 30/7 - PRO 959 – 149.5
– HT 30/8 - PRO 1003 – 150.0

FLANGES

MODEL DN FLANGES D K HOLES

mm mm mm N° Ø mm Ø holes
HT 3 - PRO 25 115 85 14
HT 5 - PRO 32 140 100
HT 8 - PRO 40 150 110 4
18
HT 15 - PRO 50 165 125
HT 30 - PRO 65 185 145 DN
K
D
 CURRENT DRAW
MODEL VOLTAGE MODEL VOLTAGE
Single phase 230 V 240 V Three phase 230 V 400 V 690 V 240 V 415 V 720 V
HTm 3/4 - PRO 7.5 A 7.2 A HT 3/4 - PRO 5.2 A 3.0 A 1.7 A 5.0 A 2.9 A 1.7 A
HTm 3/5 - PRO 9.0 A 8.6 A HT 3/5 - PRO 6.1 A 3.5 A 2.0 A 5.9 A 3.4 A 1.9 A
HTm 3/6 - PRO 10.5 A 10.1 A HT 3/6 - PRO 6.9 A 4.0 A 2.3 A 6.6 A 3.8 A 2.2 A
HTm 3/7 - PRO 12.5 A 12.0 A HT 3/7 - PRO 8.3 A 4.8 A 2.8 A 8.0 A 4.6 A 2.7 A
HTm 5/2 - PRO 6.5 A 6.2 A HT 5/2 - PRO 4.9 A 2.8 A 1.6 A 4.7 A 2.7 A 1.6 A
HTm 5/3 - PRO 8.5 A 8.1 A HT 5/3 - PRO 5.6 A 3.2 A 1.8 A 5.4 A 3.1 A 1.8 A
HTm 5/4 - PRO 10.3 A 9.9 A HT 5/4 - PRO 6.9 A 4.0 A 2.3 A 6.6 A 3.8 A 2.2 A
HTm 5/5 - PRO 12.5 A 12.0 A HT 5/5 - PRO 8.7 A 5.0 A 2.9 A 8.3 A 4.8 A 2.8 A
HTm 5/6 - PRO 13.5 A 13.0 A HT 5/6 - PRO 9.0 A 5.2 A 3.0 A 8.6 A 5.0 A 2.9 A
HTm 8/3 - PRO 8.7 A 8.3 A HT 8/3 - PRO 5.9 A 3.4 A 2.0 A 5.7 A 3.3 A 1.9 A
HTm 8/4 - PRO 10.5 A 10.1 A HT 8/4 - PRO 7.3 A 4.2 A 2.4 A 6.9 A 4.0 A 2.3 A
HTm 8/5 - PRO 12.5 A 12.0 A HT 8/5 - PRO 8.7 A 5.0 A 2.9 A 8.3 A 4.8 A 2.8 A
HTm 8/6 - PRO 14.0 A 13.5 A HT 8/6 - PRO 9.5 A 5.5 A 3.2 A 9.2 A 5.3 A 3.0 A
HT 15/2R - PRO 10.4 A 6.0 A 3.5 A 10.0 A 5.8 A 3.3 A
HT 15/3R - PRO 11.8 A 6.8 A 3.9 A 11.3 A 6.6 A 3.8 A
HT 15/3 - PRO 15.2 A 8.8 A 5.1 A 14.6 A 8.4 A 4.9 A
HT 15/4 - PRO 19.4 A 11.2 A 6.5 A 18.6 A 10.7 A 6.2 A
HT 15/5 - PRO 24.4 A 14.1 A 8.2 A 23.4 A 13.5 A 7.8 A
HT 15/6 - PRO 26.0 A 15.0 A 8.7 A 24.9 A 14.4 A 8.3 A
HT 15/7 - PRO 28.5 A 16.5 A 9.5 A 27.3 A 15.8 A 9.1 A
HT 30/2R - PRO 12.2 A 7.0 A 4.1 A 11.7 A 6.7 A 3.9 A
HT 30/2 - PRO 15.2 A 8.8 A 5.1 A 14.6 A 8.4 A 4.9 A
HT 30/3 - PRO 19.4 A 11.2 A 6.5 A 18.6 A 10.7 A 6.2 A
HT 30/4 - PRO 24.4 A 14.1 A 8.2 A 23.4 A 13.5 A 7.8 A
HT 30/5 - PRO 28.5 A 16.5 A 9.5 A 27.3 A 15.8 A 9.1 A
HT 30/6 - PRO 32.0 A 18.5 A 10.7 A 30.7 A 17.7 A 10.3 A
HT 30/7 - PRO 37.2 A 21.5 A 12.4 A 35.7 A 20.6 A 11.9 A
HT 30/8 - PRO 41.5 A 24.0 A 13.9 A 39.8 A 23.0 A 13.3 A

CAPACITOR

MODEL O CAPACITY
Single phase (230 V or 240 V)
HTm 3/4 - PRO
HTm 3/5 - PRO
HTm 5/2 - PRO 31.5 μF 450 VL
HTm 5/3 - PRO
HTm 8/3 - PRO
HTm 3/6 - PRO
HTm 5/4 - PRO 45 μF 450 VL
HTm 8/4 - PRO
HTm 3/7 - PRO
HTm 5/5 - PRO
HTm 5/6 - PRO 50 μF 450 VL
HTm 8/5 - PRO
HTm 8/6 - PRO
The data contained in this publication are not to be considered binding.
Pedrollo S.p.A. reserves the right to make any changes it deems appropriate to improve its production.
Pedrollo S.p.A.
Via Enrico Fermi, 7 - 37047 San Bonifacio (Verona) Italy
tel. +39 045 6136311 - fax +39 045 7614663
[email protected] - [email protected] - www.pedrollo.com Z-DPL90083UK_05