PDS ST415 VP - Manual
PDS ST415 VP - Manual
PDS ST415 VP - Manual
1. Key features
Color /Monochrome (Mono) scan selection 600/300 dpi scan selection Directly save JPG file to microSD card Supports microSD/microSDHC card up to 32GB Driver free to download for Windows XP, Windows Vista, Windows 7 and Mac OS 10.4 or above (direct plug-in, driver installation not required) Item 1 2 3 4 5 Function SD card indicator Battery indicator Effect indicator Counting indicator Selected resolution Description Photos will be stored in microSD card Battery is full Empty battery Color or Mono Show scanned files in microSD card High:600 dpi / Low:300 dpi 5.3 Formatting the microSD memory card Note: Formatting the microSD is recommended but not necessary. All content on the microSD card will be erased during formatting. 1. Insert a microSD card into the scanner with metal side facing up. 2. Turn on the scanner by pressing the [Power/Scan] button for 2 seconds. 3. Press the [FORMAT] button with a thin, blunt object, such as the end of a paperclip to access the button. An F will show on the LCD status display screen. 4. Press the [SCAN] button once to begin formatting the microSD card. 5. The microSD card indicator will blink until the formatting process is complete. 5.4 Time and Date setting 1. Press [TIME SET] button once to enter time setting mode by using a thin, blunt object, such as the end of a paperclip to access the button. The LCD status display screen will show 1## (step 1) for the year. ## is a set of number that would be changed to correspond to the actual time/date setting. The numbers 1-5 in front of ## indicates each step in the settings. 2. Press the [C/BW] or [DPI] button to select the current Year. 3. Press [SCAN] button once to confirm setting. 4. Repeat step 2 and 3 to continue the Time and Date setting process Indicator Setting 1## Year 2## Month 3## Date 4## Hour 5## Minute 5. After setting the Minute, 5##, press the [TIME SET] button again to complete the Time and Date setting. 5.5 Setting the resolution Press the [DPI] button to select High/Low resolution. High/Low resolution icon will be displayed on status LCD. 5.6 Setting the scan mode Press the [C/BW] button to select Color/Mono mode.
2.
Functional parts 4.
1 2 3 4 5 6 7 8 9 10 11
Part Battery door Power/Scan Error LED indicator Scan LED indicator LCD screen Resolution C/BW Time set USB interface microSD card slot Format button
Function For 2x AA alkaline batteries Power On/ Off: Press and hold this key for 2 seconds to turn power on or off. In power on mode, press this button to start scan, press this button again to stop Over speed: Red LED on Ready for scan: Green LED on Scanning status display Select High(600dpi)/Low(300dpi) resolution; High/Low resolution mode icon will be displayed on status LCD Select Color/Mono scan, Color/Mono mode icon will be displayed on status LCD Press this button to enter Time and Date setting mode Download photo to a computer via USB cable provided. microSD card storage location. Press this button with a thin, blunt object, such as the end of a paperclip to format the microSD card.
3.
5.2 Inserting a microSD memory card (not included) To operate the scanner, you must insert a microSD Card (not supplied) to record and store your pictures. Inserting the microSD memory card: 1. Turn OFF the scanner. 2. Insert the microSD card into the microSD card slot (with metal side facing up). Gently press in until card is latched and clicked into place.
Color/Mono icon will be displayed on status LCD. 5.7 How to scan NOTE: To scan, make sure your scanner is not connected to the computer. 1. Turn on scanner by pressing the [Power/Scan] button for 2 seconds. 2. Hold the document firmly with one hand on a flat surface. 3. Place the scanner on the edge of the paper approximately 5/8 to 3/4 of an inch onto the page to ensure the whole document can be scanned. Make sure to keep the scanning area in between the scanning width indicators marked on the side of the scanner.
Maximum scanning speed for Letter size document Capacity (Based on 1GB microSD card.Scan Letter size file, the quantity of scans vary depending on the content complexity) Scan width Scan length File format LCD Auto Power Off USB Port External memory Standard Battery
Color High resolution Mono High resolution Color Low resolution Mono Low resolution 600dpi color 600dpi mono 300dpi color 300dpi mono
13 Seconds 6.0 Seconds 3.0 Seconds 2.0 Seconds 220 Photos(Min.) 290 Photos(Min.) 780 Photos(Min.) 1280 Photos(Min.)
Computer does not Connection failure. recognize your scanner when connected. (You cannot find removable disk) The battery life is very short Blurry images ERR. LED is on when scanning a document Use wrong type of battery The lens of scanner is dirty Scanning speed is too fast
Make sure all cable connections are secured. Restart the computer if necessary Replace with new 2x AA alkaline batteries Clean the lens with soft dry cloth Press the Power/Scan button to reset your scan. Scan the document again.
4. Hold the scanner flat against the material and then press the [SCAN] button once.
8.27" 300dpi: 50"(Max), 600dpi: 25"(Max) JPEG Scanning status display 3 Minutes USB 2.0 high speed microSD/microSDHC Card 2XAA alkaline batteries
10. ABBYY OCR Software (Optional, not required to install to operate scanner)
Compatible with Windows XP, Windows Vista, Windows 7 To access the software Users Manual go to the Help menu for instructions on how to use the OCR software application: 1. Load and open the ABBYY software. 2. Press the F1 key located on your keyboard to launch the Help menu from the software. 3. OR, locate the ABBYY icon found next to the Time indicator on your computers taskbar and then right click on the icon to access the Help menu.
Windows XP, Windows Vista, Windows 7 and Mac OS 10.4 or above (direct plug-in, driver installation not required) Pentium II or above 64MB USB port Cause 1. Low battery power. 2. Battery not inserted properly 1. microSD card has not been installed 2. Memory is full 3. The microSD card has not been formatted properly Solution Replace or install the battery correctly 1. Install microSD card 2. Download the pictures from the scanner to the computer to create storage space 3. Reformat your microSD card. Please refer to section 5.3
9. Troubleshooting
7. Specifications
Image sensor Number of sensor Resolution Color Contact Image Sensor 5136 dots(1st~5104 dots available) Low resolution : 300 dpi(default) High resolution: 600 dpi
PDS-ST415-VP_Manual_11-0617 AM-N415-GB-VPS-3