Scribd Logo
Upload

Welcome to Scribd!

  • 416 views

    Amir Hussain Resume Instrument Tech

    Uploaded by

    Tahir
    Amir Hussain has over 10 years of experience as an Instrument Technician in oil and gas plants. He has worked on instrumentation calibration, maintenance and commissioning. Some of his responsibilities include loop checking, instrument calibration and commissioning. He is proficient in SAP work management and instrumentation such as control valves, flow meters and chromatographs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Amir Hussain Resume Instrument Tech

    Uploaded by

    Tahir
    416 views3 pages
    Amir Hussain has over 10 years of experience as an Instrument Technician in oil and gas plants. He has worked on instrumentation calibration, maintenance and commissioning. Some of his responsibilities include loop checking, instrument calibration and commissioning. He is proficient in SAP work management and instrumentation such as control valves, flow meters and chromatographs.

    Original Description:

    Amir Hussain Resume Instrument Tech

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Amir Hussain has over 10 years of experience as an Instrument Technician in oil and gas plants. He has worked on instrumentation calibration, maintenance and commissioning. Some of his responsibilities include loop checking, instrument calibration and commissioning. He is proficient in SAP work management and instrumentation such as control valves, flow meters and chromatographs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    416 views3 pages

    Amir Hussain Resume Instrument Tech

    Uploaded by

    Tahir
    Amir Hussain has over 10 years of experience as an Instrument Technician in oil and gas plants. He has worked on instrumentation calibration, maintenance and commissioning. Some of his responsibilities include loop checking, instrument calibration and commissioning. He is proficient in SAP work management and instrumentation such as control valves, flow meters and chromatographs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    AMIR HUSSAIN

    INSTRUMENT TECHNICIAN

    Experience ( Oil & Gas ): 10 Years


    Age: 33 Years
    Mobile: +92301-3674841 (WhatsApp )
    +923000883183
    E-mail: [email protected]
    Nationality: Pakistani
    Passport: DG5127402

    Work Experience Summary

    I am Instrument Technician having total experience more than 10 years in Maintenance and commissioning of
    Oil and Gas Plants ( Onshore) and Power plants. I have worked with leading Oil and Gas companies like Petrfoac,
    BHP, OMV, United Energy Pakistan as an Instrument Technician. Very well hands on working experience of SAP
    system ( Work Management Module )

    Specialties: Calibration and day to day PM and corrective maintenance jobs of Pneumatic & Smart Field
    Instrumentation, Control Valves, Flow Meters, Gas Chromatographs, Wellhead Control systems etc, Joint
    Metering Calibrations.

    Academic Qualification

    • Diploma Instrumentation and control from Prime Institute of Technology ( Lahore Tech Board )
    • Diploma of Associate Engineer, Electrical Technology ( Karachi Tech Board )

    Safety Trainings
    • Permit To Work system
    • Working at Heights
    • 8 Golden Safety Rules & Control of Work standard
    • Basic Fire Fighting
    • Electrical & Mechanical Isolations
    • Confined Space Entry

    Career Summary

    • United Energy Pakistan, Kadanwari Gas Field July 2021 to Present


    • SHARJA NATIONAL OIL COMPANY, SAJJA OIL & GAS FIELD (UAE) Dec 2019 to June 2021
    • Engro 2x330MW Thar Coal Power Plant Sep 2018 to Nov 2019
    • BHP Billiton Zamzama Gas Plant July 2016 to Aug 2018
    • OMV Pakistan, (Meher Gas Field) Feb 2014 to Jun 2016
    EMPLOYMENT HISTORY
    United Energy Pakistan, Kadanwari Gas Field
    July 2021 to Present

    • Calibration of all types of field instrumentation pneumatic, Electronic, Smart and HART based.
    • Loop checking, Continuity test, Instrument calibration, field wiring, Cause & Effect Testing, instrument
    installation, P&ID, & pneumatic drawings, loop commissioning
    • Responsible for the maintenance and calibration of all instrumentation and control system equipment.
    Perform root cause analysis of instrument failure. Perform instrument calibrations in accordance with
    standard operating procedures
    • Hands on working experience of Daniel ( Emerson ) Gas Chromatographs ( GC500 ), online Moisture
    analyzer, Rosemount online CO2 Analyzer installed for custody transfer Metering systems.
    • Review and analysis of Gas Chromatograph daily reports, Calibration reports, Alarm and event logs etc.

    • Performed calibrations on various equipment including pressure Transmitters, temperature sensors,


    flow meters and other instruments used in the oil & gas industry.

    • HART COMMUNICATOR used for configure the Transmitters, Positioners, Gas Detectors etc.
    • Loop checking, Functional testing, Pre-commissioning, commissioning activities of the Instruments.
    • Start up and commissioning activities Oil Fields and wellhead control systems.
    • Laying the cables of Instrument, Power & Ground for instrumentation and control systems.
    • Cable glanding & Termination for all instruments and junction boxes.
    • Tubing for the Transmitters and Leak Testing for the Impulse tube line Valves.
    • Meggering of Instrument & Power cable and Ground Testing.
    • Termination of Entire field instruments, Analog Junction Box, Control Junction Box, Digital Junction
    Box, Programmable Logic Controller (PLC), Remote Terminal Unit (RTU) & Switch Rack Panels.
    • Installation of level switch, level gauges, dosing pumps, flow indicator totalizer, pressure switch
    ,pressure gauges, High pressure pumps , Pneumatic valves ,Rota meter.
    • Installation of Analog junction box, Digital junction box, Power panels, Plc panel.
    Laying the cables of Instrument, Power, Control and Ground.

    SHARJA NATIONAL OIL COMPANY, SAJJA OIL & GAS FIELD (UAE)
    Dec 2019 to June 2021

    • Calibration and Maintenance of Fisher positioner & Electro pneumatic, Pneumatic, I/P Convertor.
    • Maintenance, Troubleshooting of Field Instruments including, Yokogawa, Siemens, ABB, instruments
    F&G System including Point Gas detector (Drager, Crowcon, General Monitor, Sieger), Manual Call Point,
    Open Path Gas detector (Drager, General Monitor),Sounders & Beacon, Fire Detector (Spectrex Sharp
    eye, General Monitor),Fire Safety glass, Smoke detector (Simplex, Tyco, Apollo)
    • Calibration & maintenance of flow switch, temperature switch ,pressure switch,level switch.
    • HART COMMUNICATOR model 375 and 475 model used to configure the Transmitters, Positioners, Gas
    detectors.
    • Maintenance & trouble shooting & loop checking of following instruments sov,temperature
    gauge,pressure switch,regulated power cylinder, reed switch(position),air cylinder(on/off),air filter
    regulator, thermocouple,RTD,vibration sensor, vibration transmitter, butterfly valve , level gauges, flow
    switch, limit switch, rotameter, temperature switch, dp switch, dp gauge, auto drain valve, level switch,
    , proximity switch, on-off valves.
    • Conversant with P&IDs, instrument loop diagram, instrument mounting details,cable routing
    layout,cable & conduit shedule.
    • calibration & loop checking of control valves and accessories.
    Engro 2x330MW Thar Coal Power Plant
    Sep 2018 to Nov 2019

    • During Preventive and Corrective maintenance I have got good experience in Calibration and Trouble
    Shooting of Process controls Instrumentation.
    • I have good Understanding of different kinds of INSTRUMENT Drawing Such as P&ID, Function block
    diagrams for various control systems etc.
    • Participated in Erection / Commissioning jobs and Annual Industrial shut down
    • Meggering of Instrument & Power cable and Ground Testing.
    Installation of cable tray, Tubing for transmitters.
    • Pre-commissioning and Commissioning Activities.
    • Use of SAP module for PM and CM jobs, Closeout of SAP notifications and workorders as per standard
    procedures.
    • Troubleshooting skills to solve Instrumentation, Control Valves, Cas Chromatographs, Online Analyzers,
    Fire and Gas and process control systems related problems both independently and in liaison with other
    departments.

    BHP Billiton Zamzama Gas Plant


    July 2016 to Aug 2018
    • JMC (Joint Metring Calibration) with customer SSGCL & SNGPL, Transmitor Calibration, GC / Analyser
    Checkes and Clibration on monthly basis.
    • Ariel Reciprocating compressor for wellhead forward flow. pneumatic instrumentation)
    • Working on repair & maintenance of control valves (Fisher, Masoneilan,) SDV (Mitech, Biffi, Elomatic),
    BDV

    OMV (Pakistan) (Meher Gas Field)


    Feb 2014 to Jun 2016

    • During the years, I have gained good experience in calibration & troubleshooting of Process Control
    Instrumentation such as Pressure, Level, Temperature & Flow controllers & transmitters by
    Rosemount, Foxboro, and Honeywell & Moore.
    • Meher-5 Wellhead Compressor, checking and calibration.
    • Joint meter monthly calibration with SSGCL.

    Familiar Test and Calibration Equipments


    • Druck Multifunction Pressure Calibrator
    • Ametek Temperature Bath
    • Pneumatic Calibrator (Fluke)
    • Hart communicator Rosemount models 475
    • Druck Digital pneumatic calibrators 610
    • Dead weight tester DH-Buden Berg, Ashcraft
    • Druck mA source

    You might also like