Scribd
Upload
30 views1 page

T03-00118-0601 USB-to-RJ11 Serial Programming Cable Installation Instructions

The document provides instructions for installing and using a USB-to-RJ11 serial programming cable to program Tait devices using a PC's USB port. It describes installing the driver, identifying the assigned serial port number, and where to find more information.

Uploaded by

gandariangmbojo2023
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
30 views1 page

T03-00118-0601 USB-to-RJ11 Serial Programming Cable Installation Instructions

The document provides instructions for installing and using a USB-to-RJ11 serial programming cable to program Tait devices using a PC's USB port. It describes installing the driver, identifying the assigned serial port number, and where to find more information.

Uploaded by

gandariangmbojo2023
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

T03-00118-0601 USB-to-RJ11

Serial Programming Cable


Installation Instructions

The T03-00118-0601 USB-to-RJ11 serial program-


ming cable allows you to program Tait devices using
the USB interface of your PC.
Notice Applying mechanical force on the pro-
gramming cable’s USB connector while it is
plugged in may damage the USB port of your PC.
Installing the Driver
Tait Communications recommends that you install
the driver by installing the relevant APCO or DMR
programming application before connecting the USB
plug to the PC. Connecting the USB plug to the PC
first will work, but will require you to have internet
access and administration rights to install the driver.
Notice If using this programming cable with older Tait programming applications,
such as for TP8000 and TM8000 products, you maya need to manually install the cable
driver. The driver software is available from the Tait Technical Resources website
(https://support.taitradio.com/).
Identifying the Serial Port
The PC will assign a serial port number to the connected programming cable.
1 To identify the assigned serial port number, in the Device Manager of your operating
system view the Ports settings.
2 In your Tait programming application, select the serial port as described in the Help file.
If the assigned port number exceeds the maximum number that can be set in your Tait pro-
gramming application, you can change the assigned port number.
Under Device Manager / Ports, right-click the Tait Programming Cable and select
Properties. Then in the Port Settings tab select Advanced.
If the Tait Programming Cable and the assigned port number do not appear in your Tait
programming application, restart your computer.
More Information
Refer to your radio provider for more information about this product.

a. This additional step is not required if you have previously installed an APCO
or DMR programming application, because the older applications can use the
same driver.
© Tait International Limited January 2021 The word TAIT and the TAIT logo are trademarks
www.taitradio.com of Tait Limited. All trade names referenced are the
402-00076-04 service mark, trademark or registered trademark
of the respective manufacturers.

You might also like