DHI PHEIA2.5 SH - Datasheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Channel Series| DHI-PHEIA2.

5-SH

DHI-PHEIA2.5-SH
Indoor Full Color LED

Features:

· Seamless splicing, complete picture shown;

· Standardized module size, easy to install;

· Low-power design, economical and energy-conservation;

· Uniform and beautiful color with strong stereoscopic sense;

· 100,000 hours lifespan, low maintenance cost;

RGB
No Seam 100000h No Fan High Refresh Rate High Brightness Rich Colour

Technical Specification
Model
Model DHI-PHEIA2.5-SH

Parameters
Pixel Pitch 2.5mm Processing Depth 13bit

Pixel Configuration 1R1G1B Refresh Frequency ≥3840Hz

LED Type SMD2121 Graylevel 16384

Module Size 320mmx160mmx14.6mm Driving mode Dynamic 1/32 scan, constant current drive

Module resolution 128×64 dots Input Voltage AC 200V~230V

Module Weight 0.43 kg±0.01kg Input Power (max) 500W/m2

Cabinet Size 640mmx480mmx70mm Input Power (typical) 275W/m2

Cabinet Resolution 256×192 dots Lifespan 100,000 h

Cabinet Weight 7.5 kg Installation Wall Mounted/Floor Mounted/Hanging

Cabinet Material Die-casting Aluminum Maintenance Front/Rear maintenance

Pixel Density 160,000 dots/m2 Operating Temperature -10℃ ~ +40℃

Brightness(Max) 800cd/m2 Operating Humidity 10%RH~70%RH(non-condensing)

Contrast Ratio 5000:1 Signal type AV, S-Video, VGA, DVI, YPbPr,HDMI ,SDI

Color Temperature 3000K-15000K (adjustable) CAT5 Cable (L < 100m);


Control Distance
Single mode fiber (L<10km)
Viewing Angle H160°, V140°

Recommended Viewing
≥2.5m
Distance

Rev 002.000 © 2022 Dahua. All rights reserved. Design and specifications are subject to change without notice.
The images, specifications and information mentioned in the document are only for reference, and might differ from the actual product.

www.dahuasecurity.com

You might also like