Scribd
Upload
804 views3 pages

KQ-330 Power Line Carrier Communication Module

.........................................................00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

Uploaded by

servio2009
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
804 views3 pages

KQ-330 Power Line Carrier Communication Module

.........................................................00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

Uploaded by

servio2009
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

KQ-330 Power Line Carrier Communication Module

KQ-330 Power Line Carrier Communication Module

KQ-330 is a single-row 9-pin small-volume high-performance zero-crossing carrier data


transceiver module. It is a cost-effective carrier module specially designed and developed for
reliable transmission of data under 220V AC, strong interference, strong attenuation, and long-
distance requirements. Suitable for meter reading, street lighting, smart home, fire protection,
building control and other applications where power lines are required to transmit data.

Feature/Specs:
SL No. Parameter Value and Unit
1 Part No KQ-330
2 Operating Voltage 5 ~ 12V
3 Communication Supports RS232
4 Operating frequency 120 ~ 135KHZ
5 Bandwidth 120 ~ 135KHZ
6 Insulation Resistance 500V ≥ 500M [Omega]
7 Length 53 mm
8 Width 38 mm
9 Height 15 mm
10 Weight 20 gm

KQ-130F series performance:


1. Integrated KQ-330F module and peripheral circuit carrier board, no need for other coupling
components, directly connected to 220V AC. The outer dimensions are 53×38×17 mm (L×D×H),
and the single row of pins is led out (see the figure below). The pins are connected to the 220V AC
power supply without direction (1 pin, 2 pin spacing 2X0.1 inches). 2 feet, 3 feet are 1.1 inches apart,
and the remaining feet are 0.1 inches apart.
2. The working frequency is 120~135KHZ, and the interface baud rate is 9600bps. The actual baud
rate is 100bps, 250 bytes of buffer.
3. Temperature range: -25 ° C ~ +70 ° C Humidity ≤ 90%
4. Power supply: DC +5V Receive: ≤11mA When transmitting: ≤300mA

https://sharvielectronics.com/product/kq-330-power-line-carrier-communication-module/

1|Page
KQ-330 Power Line Carrier Communication Module

Pin Description:

1P--AC: Firewire (or neutral) of 220V AC voltage


2P--AC: Zero line (or fire line) of 220V AC voltage
3P--+5V: +5V transmit power (260mA), if the data can be suspended, the power consumption
can be suspended.
4P--GND: Digital circuit ground
5P--+5V: +5V working power 11mA
6P--RX: TTL level, carrier data input, connected to the TXD of the single chip, high resistance
input can not be left floating
7P--TX: TTL level, carrier data out, connected to the RXD of the microcontroller
8P--MODE: mode selection, floating or connected to 5V is high level, grounding is low level
9P--NC/RST: The reset pin (active low) is only used when switching modes frequently during
operation. Need this function, the pin should be left floating

2|Page
KQ-330 Power Line Carrier Communication Module

Data Transceiver Module:

https://sharvielectronics.com/product/kq-330-power-line-carrier-communication-module/

3|Page

You might also like