TABLE OF CONTENTS

Page
BW Handwheel Operated
Gate Valves ................................................................. 2
Manual Type BW Gate Valves.......................................... 4
Assembly Part Numbers for
Type BW Handwheel
Operated Gate Valves ................................................. 5
Type BW Gate Valves ....................................................... 6
Valve Specifications ......................................................... 7
Single Solid Block Master Valves ..................................... 8
Dual Valves....................................................................... 9
Hydraulic BWH Valves.................................................... 10
Part Numbers for Hydraulic
Operated Type BWH
Gate Valves ................................................................ 12
Surface Safety Valves .....................................................14
Full Bore Diverter Valves ................................................ 15
3!/16" 10,000 PSI WP Type DW
Sub-Sea Fail Safe Valves .......................................... 16
3!/16" 15,000 PSI WP Type DW
Sub-Sea Fail Safe Valves .......................................... 17
Type DW Sub-Sea Fail Safe Valves ............................... 18
Control Flow DW-10 Gate Valve .................................... 19
Type BR 7!/16" 5/10,000 Hydraulic
Gate Valves ................................................................ 20
Type BR 7!/16" 5/10,000 Manual
Gate Valves ................................................................ 21
Type BR 7!/16" 15,000 Hydraulic
Gate Valves ................................................................ 22
Floguard Check Valves .................................................. 23
Flocheck ......................................................................... 24
Terms and Conditions .................................................... 25

1
 BW HANDWHEEL OPERATED GATE VALVES

PR-2 Nitrogen Tested at

15000 PSI WP Per API
16A Appendix F.

2
 BW HANDWHEEL OPERATED GATE VALVES

A new approach to dependable

sealing, long life, corrosion
resistance and easy operation.
The “BW” gate valve is API approved for severe 7.Alloy steel valve body is heat-treated to NACE
services such as choke-and-kill manifolds and specifications.
Christmas trees. By applying the newest
technology in the most critical area, the sealing 8. Easy opening and closing. The combination of
surfaces of the gate and seats, Flocon engineers hard facing on the gate, Teflon® lining in the
have gained many advantages over other gate stem packing and needle thrust bearings
valve designs. reduces the effort required to turn the
handwheel.
1. Hard-faced, alloy steel gate. The gate facing has
a high resistance to wear and corrosion. It also 9. U-type stem packing is Teflon® lined. Reduced
reduces friction between the gate and seats, so friction between the packing and stem during
less effort is required to open and close the valve opening and closing prolongs packing life.
valve. 10. Packing can be replaced with pressure in the
line. The operating stem backseats, so all
2. Solid tungsten carbide seats. These seats also packing can be changed under pressure, if
are highly resistant to wear and corrosion, with necessary.
longer life expectancy than seats made of other
materials. 11. Maintenance is simple. The gate, gate guides
and seats can be replaced without removing the
3. Holds pressure from either direction. Line valve body from the line. They do not require a
pressure forces the gate against the downstream selective fit, and no special tools are needed.
seat for a positive seal from either side.
Therefore, the valve can be mounted facing 12. Bonnet seal is a metal gasket in 5,000 psi
either way in your line. valves. A BX-type ring gasket is used in 10,000
and 15,000 psi valves.
4. Venting prevents valve damage. the body cavity
is vented to the valve’s upstream side. Since 13. Interchangeable with API gate valves. “BW”
there is no danger of a pressure lock . . no valves can be substituted for other gate valves of
chance of trapped fluids damaging the valve due comparable size and pressure rating in existing
to heat expansion. manifolds and Christmas trees.

5. Stress on the stem is minimal. Once the gate is 14. Selection. Flocon’s Type “BW” gate valves are
closed, no further tightening or wedging is available in pressure ratings to 15,000 psi, in a
required for a positive seal. This reduces the full array of trims, with manual or hydraulic
hazard of stress corrosion cracking the stem. operators. High temperature models (manual
only) are available.
6. Gate guides keep body cavity clear. Metal guides
run the full length of the gate’s travel. For details contact the Flocon office nearest you.

3
 MANUAL TYPE BW GATE VALVES

6
19 18
17 25 29

12
16
27 28
4
5
22
7
24 30
20
21
3 Part Qty
1!#/16" 1!#/16"
10M 15M
13 3. Bonnet 1 564857 565102
4. Packing Gland 1 564207 564207
23 5, Bearing Cap 1 564202 564202
6. Stem Adapter 1 564205 564205
7. Stem 1 564213 564213
8. Retainer Plate 2 564861 564861
9. Gate 1 564860 564860
10. Body Bushing 2 564868 564868
11. Seat Ring 2 564862 564862
12. Stem Pin 1 564206 564206
13. Bonnet Gasket 1 564858 564858
14. Seal Ring, Seat 2 564863 564863
15. Seal Ring, Body Bushing 2 564867 564867
16. "O" Ring, Bearing Cap 1 030606 030606
14 17. Grease Fitting 2 564225 564225
18. "O" Ring, Stem Adapter 1 030591 030591
11 19. Handwheel 1 564251 564251
20. Stud, Tap End 8, 12* or 16* 564256 565106
15 21. Nut, Bonnet 8, 12* or 16* 020003 020010
22. Stem Packing 1 564208 564208
10 23. Alignment Pin 2 N/A N/A
24. Injector Plug 1 564226 564226
9 25. Bolt, Hex, Head 1 010239 010239
26. Gate Guide 2 564869 564869
8 27. Bearing, Thrust 2 564204 564204
28. Race, Thrust Bearing 4 564203 564203
26 29. Nut, Hex 1 020006 020006
PR-2 Nitrogen Tested at 30. Check Valve 1 564379 564379
15000 PSI WP Per API *12 Required **16 Required
16A Appendix F.

4
 ASSEMBLY PART NUMBERS FOR TYPE BW
HANDWHEEL OPERATED GATE VALVES

Assembly Part Numbers For Type

BW Handwheel Operated
Gate Valves
Size & T-2 Trim w/
Pressure Standard
Rating Ring Grooves
Flanged Ends
1!#/16"-10000 564850
1!#/16"-15000 565100
2!/16"-5000 564200
2!/16"-10000 564350
2!/16"-15000 565150
2(/16"-5000 564750
2(/16"-10000 564800
2(/16"-15000 565200
3!/8"-3000 565000
3!/8"-5000 564250
3!/16"-10000 564400
3!/16"-150000 565250
4!/16"-3000 565050
4!/16"-5000 564300
4!/16"-10000 564450
4!/16"-15000 565300
7!/16"-2000 564600
7!/16"-3000 564650
7!/16"-5000 564700

Part Numbers by Pressure & Sizes (inches - psi)

2!/16" 2!/16" 2!/16" 2(/16" 2(/16" 2(/16" 3!/8" 3!/16" 3!/16" 4!/16" 4!/16" 14!/16" 7!/16" 7!/16" 7!/16"
5M 10M 15M 5M 10M 15M 5M 10M 15M 5M 10M 5M 2M 3M 5M
564211 564357 565152 564757 564807 565202 564257 564407 565258 564307 564457 565302 564607 564657 564707
564207 564207 564207 564207 564207 564469 564207 564207 565257 564207 564469 565303 564469 564469 564469
564202 564202 564202 564202 564202 564470 564202 564202 565262 564202 564470 565304 564470 564470 564470
564205 564205 564205 564205 564205 564471 564205 564205 565263 564205 564471 565305 564471 564471 564471
564213 564213 564213 564759 564759 565203 564259 564259 565256 564309 564473 565306 564609 564609 564609
564215 564215 564215 564761 564761 565204 564261 564261 565259 564311 564472 565307 564611 564611 564611
564214 564214 564214 564760 564760 565205 564260 564260 565260 564310 564460 565308 564610 564610 564610
564222 564222 564222 564768 564768 565206 564268 564413 565252 564318 564463 565309 564618 564618 564618
564216 564216 564216 564762 564762 565207 564262 564262 564261 564312 564468 565310 564612 564612 564612
564206 564206 564206 564206 564206 564467 564206 564206 565311 564206 564467 565311 564467 564467 564467
564212 564358 564358 564758 564808 565208 564258 564409 565253 564308 564459 565312 564608 564608 564608
564217 564217 564217 564763 564763 565209 564263 564263 565255 564313 564313 565313 564613 564613 564613
564221 564221 564221 564767 564767 565210 564267 564267 565255 564317 564317 565314 564617 564617 564617
030606 030606 030606 030606 030606 030182 030606 030606 030359 030606 030182 030362 030182 030182 030182
564225 564225 564225 564225 564225 564225 564225 564225 564225 564225 564225 564225 564225 564225 564225
030591 030591 030591 030591 030591 030655 030591 030591 030114 030591 030655 030602 030655 030655 030655
564201 564251 564251 564201 564251 564251 564251 564401 564401 564251 564401 564401 564251 564251 564401
564210 564356 565153 564756 564806 565211 564256* 564406 565271** 564306 564456 565315 564606* 564356* 564706*
020009 020003 020010 020001 020010 020003 020003 020011 565268** 020010 020012 020013 020001 020003* 020011*
564208 564208 564208 564208 564208 564454 564208 564208 565316 564208 564454 565316 564454 564454 564454
050090 N/A N/A 050090 N/A N/A 050460 N/A N/A 050460 N/A N/A 050460 050460 050460
564226 564226 564226 564226 564226 564226 564226 564226 564226 564226 564226 564226 564226 564226 564226
010239 010239 010239 010239 010239 010239 010239 010239 010239 010239 010239 010239 010239 010239 010239
564223 564223 564223 564769 564769 565212 564269 564414 565251 564319 565317 565317 564619 564619 564619
564204 564204 564204 564204 564204 564453 564204 564204 565318 564204 564453 565318 564453 565453 564453
564203 564203 564203 564203 564203 564452 564203 564203 565319 564203 564452 565319 564452 564452 564452
020006 020006 020006 020006 020006 020006 020006 020006 020006 020006 020006 020006 020006 020006 020006
N/A 564379 564379 N/A 564379 564379 N/A 564379 564379 N/A 564379 564379 N/A N/A N/A

5
 TYPE BW GATE VALVES

Gate Valve For Production Service Dimensional Data And Specifications

Working Pressure 3000 5000 10000 15000
Size & Bore 2!/16 2(/16 3!/8 4!/8 2!/16 2(/16 3!/8 4!/8 1!#/16 2!/16 2(/16 3!/16 4!/16 1!#/16 2!/16 2(/16 3!/16
E to E Thd 10%/8 12#/8 13%/8 N/A 10%/8 12#/8 13%/8 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
E to E FLG 14%/8 16%/8 17!/8 20!/8 14%/8 16%/8 18%/8 21%/8 18!/4 20!/2 22!/4 24#/8 26#/8 18 19 21 23(/16
Width 6#/4 7%/8 7!/2 10!/2 7 8#/16 9!/4 10!#/16 9!/16 9#/8 9!#/16 10!/4 12!#/16 9&/8 9&/8 11!/2 13(/16
CL to Top 13 N/A 16!#/16 18&/16 15!/8 15!%/16 16!#/16 18&/16 15!/8 15!/8 15!#/16 16&/8 19!!/16 15!/8 15!/8 17#/16 20!%/16
CL to Bottom 5%/8 6!/2 7#/8 9!/8 5%/8 6!/2 7#/8 9!/8 5#/4 5&/8 6!#/16 8!/16 10!/16 5&/8 6!/8 7%/16 9!/4
CL to H/W 15#/8 16!/8 19!/16 20!!/16 17#/8 18!/8 19!/16 20!!/16 17#/8 17#/8 18!/8 18!/16 20!%/16 17#/8 17#/8 19(/16 22#/16
H/W O.D. 14 14 14 18!/2 14 14 18!/2 18!/2 14 18!/2 18!/2 24 24 18!/2 18!/2 18!/2 24
API Ring R-24 R-27 R-31 R-37 R-24 R-27 R-35 R-39 151 152 153 154 155 151 152 153 154
Weight FLG 180 249 282 450 182 255 360 545 270 275 485 680 1057 275 350 800 1065
Weight THD 130 185 210 N/A 130 190 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

D
Lubrication Chart
Operational Lubricant Name
Properties CF #1 CF #3 CF Artic 70

Standard Crude E G E
C
Low Temp. to - 70º P F E

High Temp. to - 650º P E P

H 2S (Sour Gas) G F F

CO 2 G F F

Diesel E P P
B
Gass Well Condensates G F F

E - Excellent G - Good F - Fair P - Poor

A

Bore Size Lubricant

(Inches) Pressure Weight
(Pounds)
1!#/16 ALL 2.0
2!/16 ALL 2.1
2(/16 To 10,000 3.4
2(/16 15,000 5.4
Pail Drum 3!/8 To 5,000 5.3
Lubricant Type
10 LB 40 LB 100 LB 400 LB 3!/16 10-15,000 8.0
4!/16 To 5,000 10.8
CF - #1 564241-1 564241-2 564241-3 564241-4
4!/16 10-15,000 11.4
CF - #3 564441-1 564441-2 564441-3 564441-4 6!/8 ALL 26.0
7!/16 ALL
CF - Artic 70 564641-1 564641-2 564641-3 564641-4
9 3,000
11 3,000
13%/8 3,000
6
 VALVE SPECIFICATIONS

Control Flow Inc.,

Standard Materials Used In type 'BW', 'BR' & 'DW' Gate Valves
Pressure
Trim 1, 3 1, 3 Bonnet Body
Service Rating Gate Seat Stem
Code Body Bonnet Seal Bushing
(PSI)

Oil and Gas 5000 API II API II

4 Stainless
General T-1 316 SS 17-4PH 17-4PH
Service 10,000 & 4130 Steel
API III API III
15,000

Oil and Gas 5000 API II API II

2 Tungsten
H2S Per NACE T-2 316 SS 17-4PH 17-4PH
10,000 & 4130 Carbide
MR-01-75 API III API III
15,000
API II API II
5000
Oil and Gas CA-15 410 SS 2 Tungsten
T-3 316 SS 17-4PH 17-4PH
H2S and CO2 10,000 & API III API III 410 SS Carbide
15,000 410 SS 410 SS

Notes:
1. Controlled Hardness is 235 BHN MAX
2. T-C Hardface
3. Charpy V-Notch test per API/DNV required for
any trim at low temperature service.
Temperature to be specified if above 250°F
4. Tungsten carbide hardface
Type 'BW' and Type
'BWH' Gate Valves
No. of Turns to
Size Open Gate

1!#/16" - 10000 12!/2

Operating
1!#/16" - 15000 12!/2 Recommendations
2!/16" - 5000 12!/2
Overtightening the type BW Gate Valve does
not assist in affecting a seal.
2!/16" - 10000 12!/2
Jamming the gate may prevent the valve
2!/16" - 15000 12!/2 from sealing.
2(/16" - 5000 15!/4

2(/16" - 10000 15!/4

Recommended operative procedure is:
2(/16" - 15000 15#/4
1. Opening the valve
3!/8" - 5000 18!/4 Turn the handwheel counter-clockwise until
3!/16" - 10000 18!/4 the gate shoulders, then clockwise one
3!/16" - 15000 15!/2
quarter turn.
4!/16" - 5000 23!/8
2. Closing the valve
4!/16" - 10000 23!/8 Turn the handwheel clockwise until the gate
4!/16" - 15000 29!/2 shoulders in the bottom of the body, then
7!/16" - 2000* 33!/8
counter-clockwise one quarter turn.
7!/16" - 3000* 33!/8

7!/16" - 5000* 33!/8

7
 SINGLE SOLID BLOCK MASTER VALVES

Style C-FB Style C-FF

Style C-FG

Style C-FH

Run Working Style Bottom Top Outlet Overall

Pressure Flange Connection Connection Height
2!/16" 5000 C-FB/C-FG 7!/16"-5000 2!/16"-5000 2!/16"-5000 28"
2(/16" 5000 C-FB/C-FG 7!/16"-5000 2(/16"-5000 2!/16"-5000 28!/2"
2!/16" 10000 C-FB/C-FG 7!/16"-10000 2!/16"-10000 2!/16"-10000 28"
2(/16" 10000 C-FB/C-FG 7!/16"-10000 2(/16"-10000 2!/16"-10000 28!/2"
2!/16" 5000 C-FF/C-FH 7!/16"-5000 2!/16"-5000 2!/16"-5000 36"
2(/16" 5000 C-FF/C-FH 7!/16"-5000 2(/16"-5000 2!/16"-5000 36"
2!/16" 10000 C-FF/C-FH 7!/16"-10000 2!/16"-10000 2!/16"-10000 36"
2(/16" 10000 C-FF/C-FH 7!/16"-10000 2(/16"-10000 2!/16"-10000 36"

8
 DUAL VALVES

Dual 5 Bolt Flanged Valves

Size & Working 5 Bolt Ring Min. CL Overall
Bore Pressure FLG Size Gasket Spacing Height
2!/16 2000 2!/16-5000 BX-20 3#%/64 24
2!/16 3000 2!/16-5000 BX-20 3#%/64 24
2!/16 5000 2!/16-5000 BX-20 3#%/64 24
2(/16 2000 2!/2-5000 RX-210 4!/2 24
2(/16 3000 2!/2-5000 RX-210 4!/2 24
2(/16 5000 2!/2-5000 RX-210 4!/2 24

Dual Block Valves

End Flanges Bores Centerline Overall
& Max. W.P. Spacing Height

7!/16-3000 2!/16 x 2!/16 3#%/64 25%/8

7!/16-5000 2!/16 x 2!/16 3#%/64 27&/8

7!/16-10000 2!/16 x 2!/16 3#%/64 28

Dual Solid Block Cross Valves

Lower Bores Center Line Style Overall
Connection Spacing Height
7!/16"-5000 2!/16" x 2!/16 3#%/64" C-FA 28
7!/16"-5000 2!/16" x 2!/16 3#%/64" C-FB 33
7!/16"-10000 2!/16" x 2!/16 3#%/64" C-FA 30
7!/16"-10000 2!/16" x 2!/16 3#%/64" C-FB 35
9"-5000 2(/16" x 2(/16" 4!/2" C-FA 41
9"-5000 2(/16" x 2(/16" 4!/2" C-FB 46
9"-10000 2(/16" x 2(/16" 4!/2" C-FA 43
9"-10000 2(/16" x 2(/16" 4!/2" C-FB 48
11"-5000 3!/8" x 3!/8" 5#/64" C-FA 41
11"-5000 3!/8" x 3!/8" 5#/64" C-FB 47
Style C-FA 11"-10000 3!/16" x 3!/16" 5#/64" C-FA 43
Style C-FB
11"-10000 3!/16" x 3!/16" 5#/64" C-FB 48
9
 HYDRAULIC BWH VALVES

Hydraulic Operated
Gate Valve
For Drilling and Production Service

Features:
1 The hydraulic valve is available with a manual
closing and locking screw.

2 The adjusting nut in the blind cylinder head

absorbs the overload or test pressures applied
to the opening side of the valve, preventing the
pressure from reaching the stem.

3 The cylinder head to allow the piston to cover

the exhaust port before the end of the stroke.
This arrangement provides enough damping to
protect the valve from shock loading.

4 The overload or test pressures applied to the

closing side of the cylinder are absorbed by the
piston bottoming out against the packing gland
of the stem.

5 The tail rod and the operating stem have

backseating shoulders to allow changing the
stem packing while the valve is under pressure.

6 Cylinder-operated valves have a special body

containing a stuffing box through which a tail rod
passes from the gate. The tail rod serves the
following purposes:

❑ Acts as a pressure balance for the stem

which connects the gate to the operating
piston.

❑ Compensates for the volume displaced by

the operating stem.

10
 HYDRAULIC BWH VALVES

Assembly Part Numbers for Type

BWH Hydraulic Operated Gate Valves
Size and T-2 Trim w/
Pressure Standard
Rating
Flanged Ends Ring Grooves

1!#/16"-10000 566200
1!#/16"-15000 566075
2!/16"-5000 565600
2!/16"-10000 565800
2!/16"-15000 565950
2(/16"-5000 565650
2(/16"-10000 565850
2(/16"-15000 566000
3!/8"-3000 565450
3!/8"-5000 565700
3!/16"-10000 565840
3!/16"-15000 565215
4!/16"-3000 565500
4!/16"-5000 564500
4!/16"-10000 564550
7!/16"-20001 566150
7!/16"-30001 565550
7!/16"-50001 565750
1
Restricted Bore 6!/8" I.D.

Dimensional Data
D
Hydraulic Operated Valve
Size &
Working A B C D
Pressure

1!#/16"-10000 18!/4" 14!/4" 35#/8" 18"

1!#/16"-15000 18" 14!/4" 35#/8" 18"
2!/16"-5000 14%/8" 14!/2" 35#/8" 14" C
2!/16"-10000 20!/2" 14!/2" 35#/8" 18"
2!/16"-15000 19" 14!/2" 35#/8" 18"
2(/16"-5000 16%/8" 15!%/16" 37&/8" 14"
2(/16"-10000 22!/4" 15!%/16" 37&/8" 18"
2(/16"-15000 21" 15!/2" 42!/2" 18"
3!/8"-5000 18%/8" 17!/4" 40#/8" 18"
3!/16"-10000 24#/8" 17!/4" 41#/4" 24"
3!/16"-15000 23(/16" 20%/8" 50!/8" 18"
4!/16"-5000 21%/8" 19#/4" 44&/8" 18" B
4!/16"-10000 26#/8" 19#/4" 48&/8" 24"
7!/16"-2000* 22!/8" 25&/8" 58!/16" 18"
7!/16"-3000* 24!/8" 25&/8" 58#/16" 18" A
7!/16"-5000* 28" 25&/8" 58#/16" 24"
11
 PART NUMBERS FOR HYDRAULIC OPERATED TYPE
BWH GATE VALVES

26 44

Part Qty 1!#/16" 1!#/16" 2!/16"

10M 15M 5M
17 3. Protector & indicator 1 565625 565625 565625
4. Body Bushing 2 564868 564868 564222
16 5. Seat Ring 2 564862 564862 564216
30 6. Gate 1 566208 566208 565608
7. Bonnet 1 564857 565102 564211
36
8. Stem Extension 1 565626 565626 565626
14 9. Headf, Lower Cylinder 1 564533 564533 564533
42 41
35 15 10. Packing Gland 1 564519 564519 564519
13 11. Cylinder 1 565628 565628 565628
34
12 12. Piston 1 564527 564527 564527
38 13. Head Bld. Cylinder 1 564530 564530 564530
29 14. Adjusting Nut 1 566228 566228 566228
33
18 15. Centering Pin 1 564532 564532 564532
47 16. Locking Screw 1 566229 566229 566229
10
46 17. Handwheel 1 564251 564201 564201
9 18. StemGate 1 565607 565607 565607
19. Bonnet Gasket 1 564858 564858 564212
21
4
11 28 20. Retainer Plate 2 564861 564861 564215
37 45 21. Stem Packing 2 564208 564208 564208
27 22. Stem Pin 1 564518 564518 564518
32
23. Seal Ring, Body 2 564867 564867 564221
39 40 24. Seal Ring, Seat 2 564863 564863 564217
25. Alignment Pin 2 N/A N/A 050090
7
19 26. Bolt, Hex. Head 1 010239 010239 010239
27. "O" Ring, Packing Gland 1 030071 030071 030071
25 5 28. "O" Ring, Cylinder 2 030014 030014 030014
29. "O" Ring, Stem 2 030058 030058 030058
30. "O" Ring, Locking Screw 1 030591 030591 030591
31. Pipe Plug 1 066324 066324 066324
32. Relief Fitting 1 564542 564542 564542
33. Pipe Plug 2 066326 066326 066326
34. Set Screw 2 010012 010012 010012
6 4 35. Set Screw, Centering Pin 1 010015 010015 010015
36. Grease Fitting 1 050267 050267 050267
24 22
37. Injector Plug 1 564226 564226 564226
20 23 38. Nut, Heavy Hex., (Nylon) 1 564538 564538 564538
39. Nut, Bonnet 8, 12* 020003 020010 020009
43
40. Stud, Tap End, Bonnet 8, 12* 564256 565106 564210
8 41. Nut, Heavy Hex., Cylinder 6 020004 020004 020004
42. Stud, All Threqad, Cylinder 6 565639 565639 565639
31
43. Gate Guide 2 564869 564869 564223
21 44. Nut, Hex 1 020006 020006 020006
45. Check Valve 1 564379 564379 N/A
46. Wear Ring 2 070029-1 070029-1 070029-1
3
47. Piston Seal 1 070010-5 070010-5 070010-5

12
PART NUMBERS FOR HYDRAULIC OPERATED TYPE
BWH GATE VALVES

Part Numbers by Pressures and Sizes

2!/16" 2!/16" 2(/16" 2(/16" 2(/16" 3!/8" 3!/16" 3!/16" 4!/16" 4!/16" 7!/16" 7!/16" 7!/16"
10M 15M 5M 10M 15M 5M 10M 15M 5M 10M 2M 1 3M 1 5M1
565625 565625 565675 565675 566006 565725 565725 565218 564525 564574 565575 565575 565575
564222 564222 564768 564768 565206 564268 564413 565252 564318 564463 564618 564618 564618
564216 564216 564762 564762 565207 564262 564262 565261 564312 564468 564612 564612 564612
565608 565608 565658 565658 566009 565708 565708 565219 564508 564558 565558 565558 565558
564357 565152 564757 564807 565202 564257 564407 565258 564307 564457 564607 564657 564707
565626 565626 565676 565676 566007 565726 565726 565220 564526 564575 565576 565576 565576
564533 564533 564533 564533 564582 564533 565913 565221 564533 564582 564582 564582 564582
564519 564519 564519 564519 564568 564519 565916 565222 564519 564568 564568 564568 564568
565628 565628 565678 565678 566013 565728 565728 564577 564528 564577 565578 565578 565578
564527 564527 564527 564527 564576 564527 564527 564576 564527 564576 564576 564576 564576
564530 564530 564530 564530 564579 564530 564530 564579 564530 564579 564579 564579 564579
566228 566228 565729 565729 564578 565729 565729 565223 564529 564578 565598 565598 565598
564532 564532 564532 564532 564581 564532 564532 564581 564532 564581 564581 564581 564581
566229 566229 565731 565731 564531 565731 565731 564531 564531 564531 565580 565580 565580
564251 564251 564201 564251 564251 564251 564401 564401 564251 564401 564251 564251 564401
565607 565607 565657 565657 566011 565707 565914 565224 564507 564557 565557 565557 565557
564358 564358 564758 564808 565208 564258 564409 565253 564308 564459 564608 564608 564608
564215 564215 564761 564761 566020 564261 564261 565259 564311 564472 564611 564611 564611
564208 564208 564208 564208 564454 564208 564208 565316 564208 564454 564454 564454 564454
564518 564518 564518 564518 050045 564518 564518 566103 564518 050045 564567 564567 564567
564221 564221 564767 564767 565210 564267 564267 565254 564317 564317 564617 564617 564617
564217 564217 564763 564763 565209 564263 564263 565255 564313 564313 564613 564613 564613
N/A N/A 050090 N/A N/A 050460 N/A N/A 050460 N/A 050460 050460 050460
010239 010239 010239 010239 010239 010239 010239 010239 010239 010239 010239 010239 010239
030071 030071 030071 030071 030000 030071 030071 030016 030071 030000 030000 030000 030000
030014 030014 030014 030014 030088 030014 030014 030088 030014 030088 030088 030088 030088
030058 030058 030058 030058 030061 030058 030058 030061 030058 030061 030061 030061 030061
030591 030591 030591 030591 030591 030591 030591 030591 030591 030591 030591 030591 030591
066324 066324 066324 066324 066324 066324 066324 066324 066324 066324 066324 066324 066324
564542 564542 564542 564542 564542 564542 564542 564542 564542 564542 564542 564542 564542
066326 066326 066326 066326 066326 066326 066326 066326 066326 066326 066326 066326 066326
010012 010012 010012 010012 010012 010012 010012 010012 010012 010012 010012 010012 010012
010015 010015 010015 010015 010015 010015 010015 010015 010015 010015 010015 010015 010015
050267 050267 050267 050267 050267 050267 050267 050267 050267 050267 050267 050267 050267
564226 564226 564226 564226 564226 564226 564226 564226 564226 564226 564226 564226 564226
564538 564538 564538 564538 564587 564538 564538 564587 564538 564587 564587 564587 564587
020003 020010 020001 020010 020003 020003 020011 565268 020010 020012 020001* 020003* 020011*
564356 565153 564756 564806 565211 564256 564406 565271 564306 564456 564606* 564356* 564706*
020004 020004 020004 020004 020001 020004 020004 020001 020004 020001 020001 020001 020001
565639 565639 565689 565689 566014 565740 565740 565225 564540 564589 565589 565589 565589
564223 564223 564769 564769 565212 564269 564414 565251 564319 564464 564619 564619 564619
020006 020006 020006 020006 020006 020006 020006 020006 020006 020006 020006 020006 020006
564379 564379 N/A 564379 564379 N/A 564379 564379 N/A 564379 N/A N/A N/A
070029-1 070029-1 070029-1 070029-1 070029-1 070029-1 070029-1 070029-1 070029-1 070029-2 070029-2 070029-2 070029-2
070010-5 070010-5 070010-5 070010-5 070010-4 070010-5 070010-5 070010-4 070010-5 070010-4 070010-4 070010-4 070010-4

13
 SURFACE SAFETY VALVES

The SSV is an automatic wellhead valve which

shuts off the flowstream upon loss of supply
pressure. To perform this function, according to
14-D, and API specifications, the SSV must be
assembled as the second valve in the wellhead
flowstream.

14
 FULL BORE DIVERTER VALVES

Diverter Valve
Full Bore Diverter Valves
3000 PSI Working Prressure
Size & Bore 9" 11" 13%/8"
A 35 37 42
B 30 32 37
C 22 24 29
D 30 30 30
API Ring R-49 R-53 R-57

Full Bore Diverter Valve

Since the early days of offshore drilling,
contractors have used almost every type of
valve for diverter service. This included ball
valves, butterfly valves, and etc. Some have
used large bore ANSI pipeline valves. None of
these valves have proven successful.
Control Flow now introduces a valve
designed for diverter service. This valve design
is field proven in mud and pressure control
applications.
The valve has API diameter full bores. Sizes
available are 9", 11" and 13 5/8" API flanged
ends at working pressures to 3000 PSI.
Full Bore Diverter Valves are available as
handwheel operated or hydraulic operated.
15
 3!/16" 10,000 PSI WP TYPE DW
SUB-SEA FAIL SAFE VALVES

19
20 Item Description Qty* Part Number
9 5 6 15 2 1 STEM PROTECTER 1 565352
21
2 GATE 1 565354
22 3 STEM EXTENSION 1 565726
23 4 BONNET GASKET 1 564409

24 5 GATE GUIDE 2 564414

6 RETAINER PLATE 2 564261
25
7 BODY BUSHING 2 564413
26 8 SEAT RING 2 564262
SEAL-BODY
9 2 564267
4 BUSHING
10 SEAL-SEAT RING 2 564263
7 10 8 13 11 STEM PACKING 3 564208
27
12 BACK UP RING 3 070028-02
3
13 BONNET STUD 8 564706
28
14 BONNET NUT 8 02001
15 SPRING PIN 2 070027-01
16 O-RING 2 030583
20
17 O-RING 2 030591

22 11 18 BONNET 1 565353
19 PIPE PLUG 1 066326
29 14
20 RETAINING RING 2 070012-2
31 21 HEAD 1 565357
11
18 22 O-RING 3 070021-1
34 12
23 CAP SCREW 1 565367
16
35 24 PISTON 1 565370
17
17 25 STEM 1 565356
32 SPRING CARTRIDGE
33 1 26 1 565371
ASSY
16
27 S.H. PIPE PLUG 3 065001
12 28 CYLINDER 1 565355
11 29 LOAD RING 1 565362
30
30 RETAINING RING 1 070012-4
31 RELIEF VALVE 1 564542
32 SEAL RING 1 565373
33 SLEEVE 1 565363
34 CHECK VALVE 1 564379
35 GREASE FITTING 1 564226

16
 3!/16" 15,000 PSI WP TYPE DW
SUB-SEA FAIL SAFE VALVES

17
19
Item Description Qty* Part Number
9 5 6 15 2
1 STEM PROTECTER 1 565388
2 GATE 1 565387
3 STEM EXTENSION 1 565385
21 4 BONNET GASKET 1 565253
5 GATE GUIDE 2 565251
6 RETAINER PLATE 2 565364
22
7 BODY BUSHING 2 565252
8 SEAT RING 2 565261
4 SEAL-BODY
23 9 2 565254
BUSHING
7 10 13 10 SEAL-SEAT RING 2 565255
24 8
11 STEM PACKING 2 565401
3
12 BACK UP RING 1 070028-3
25
13 BONNET STUD 16 565271
14 BONNET CAP NUT 16 565383
15 SPRING PIN 2 070027-2
20
16 BONNET 1 565393
32 14 17 PIPE PLUG 2 066326
28
18 RETAINING RING 1 070012-12
33
19 HEAD 1 565391
27 20 O-RING 3 030098
11
16 21 PISTON 1 565395
12
22 STEM 1 565396
SPRING CARTRIDGE
1 23 1 565374
ASSY
12 29
24 S.H. PIPE PLUG 3 010012
30
31 25 CYLINDER 1 565392

26 PACKING RETAINER
26 1 565398
SLEEVE
18 27 RELIEF VALVE 1 564542
28 0-RING 1 030067
29 CHECK VALVE 1 564379
30 GREASE FITTING 1 564226
31 BACK UP RING 1 565365
32 BACK UP RING 4 070007-4
33 BACK UP RING 2 070007-5

17
 TYPE DW SUB-SEA FAIL SAFE VALVES

Dimensional Data for Type ‘DW’ Sub Sea Fail Safe Valve
End
Size A B C D E
Connection

3!/16"-10000 Flange 20#/4" 20 15&/16" 15&/16" 25#/4"

Hub 16#/8" 17#/4" 13#/16" 13#/16" 26

Studded 10#/4" 15 10&/16" 10&/16" 21!/8"

3!/16"-15000 Flange 23(/16" 26 20 16 1#/8"

Hub 19#/8" 23!/4" 17!/4" 16!/2" 31!/4"

13#/8" 20!/4" 14!/4" 14!/8" 28!/4"

A
Straight

B
Tee Type Dual

D E
Single Target Type Dual Target Type
18
TYPE DW-10 SUBSEA VALVE

The Control Flow DW-10 gate valve is a

compact design especially suited for the harsh
service requirements of subsea choke and kill
lines in water depths up to 13,000 feet. DW-10
valves are available in a variety of sizes, trims,
and pressure ranges up to 15,000 psi. The DW-
10 features a balanced stem design which
prevents fluid displacement in the valve body
during opening and closing along with bi-
directional sealing. These features prevent the
valve from opening when line pressure is less
than sea pressure, and allow several valves to
be placed together in the same block or line
without the possibility of pressure lock between
the valves. As with all Control Flow slab style
gate valves, metal to metal sealing ensures
reliability under extreme conditions and seats
are especially designed to prevent body
erosion.
The DW-10 valve is easily maintained and
features a detachable actuator completely
separate from the valve body, bonnet, stem, and
packing thereby maintaining the integrity of the
valve even with the actuator removed. Typically
the operating pressure of the actuator cylinder
is 1500 psi, however a maximum pressure
rating of 3000 psi can be applied under certain
circumstances. All DW-10 subsea valves can be
easily converted to an R.O.V. override.

19
 TYPE BR, 7!/16" 5/10,000 HYDRAULIC
GATE VALVES, FLANGED OR STUDDED

34 35
16 Item
27 Part Qty. 7!/16" 5M 7!/16" 10M
No.
15
36 1 Body 1 565157 564901
2 Body Extension 1 565158 564914
14 3 Stem Protector/Indicator 1 565159 564915
4 Body Bushing 2 564906 564906
40 41
33 5 Seat Ring 2 564907 564907
6 Gate 1 565162 564905
13 47 48 29 7 Bonnet 1 565163 564902
8 Stem Extension 1 565164 564916
46 42 9 Lower Cylinder Head 1 565165 564917
10 Packing Gland 1 565166 564918
24 12 11 Cylinder 1 565167 564919
12 Piston 1 565168 564920
50 13 Blind CylinderHead 1 565169 564921
14 Adjusting Nut 1 565170 564922
11 26 15 Locking Screw 1 565171 564924
16 Handwheel 1 565172 564925
17 Stem 1 565173 564926
17 9 18 Ring Gasket, Bonnet 1 564927 564927
19 Retainer Plate 2 564928 564928
20 Stem Packing 2 565316 564937
10 38 39 21 Stem Pin 1 566103 070019
Seal Ring, Body Bushing &
22 4 564929 564929
Seat
25 23 Seal Ring, Seat 2 564930 564930
24 O-Ring, Cylinder 2 030040 030100
31 37 25 O-Ring, Packing Gland 1 030610 030019
7 26 O-Ring Stem 2 030065 030023
20 27 O-Ring, Adjustintg Nut 1 030067 030023
28 Gate Guide 2 565160 564933
18
29 Centering Pin 1 565161 564940
30 Pipe Plug 1 066324 066324
1 31 Relief Fitting 1 564542 564542
32 Pipe Plug 2 066326 066326
5 23 33 Set Screw 2 010012 010012
34 Hex Bolt 1 010239 070016
4 22 35 Hex Nut 1 020006 020006
36 Grease Fitting 1 050267 050267
37 Injector Plug 1 564226 564226
6
38 Hex Nut 12 020000 020014
19 39 Stud 12 565174 564934
40 Nut 6 020001 020010
28 41 Stud 6 565175 564932
42 Hex Nut 1 020106 020106
30 43 Set Screw, Hex, Cup Point 1 010015 010012
44 Nameplate 1 564220 564220
8 45 Rivet 4 010658 010658
2 46 Half Coupling 2 564547 070015
47 Thrust Bearing 1 N/A 564938
3 48 Race Bearing 2 N/A 564939
49 Check Valve 1 N/A 564379
50 Wear Ring 2 49223-11 49223-9
51 Lip Seal 2 070018-4 070018-3

20
 TYPE BR, 7!/16" 5/10,000 MANUAL GATE VALVES

Item Part Qty 7!/16" 5M 7!/16" 10M

No.

1 Body 1 565157 564901-3

2 Bonnet 1 565163 564902
3 Packing Gland 1 565182 564976
4 Bearing Cap 1 565183 564977 18
5 Stem Adapter 1 565305 564981 23 27
4
6 Stem 1 565184 564978
17
7 Retainer Plate 2 564928 564928 25 26
5 11
8 Gate 1 565185 564980
15
9 Body Bushing 2 564906 564906 16
10 Seat Ring 2 564907 564907 6
11 Stem Pin 1 565311 564982 3
12 Bonnet Gasket 1 564927 564927 21
19 20
13 Seal Ring, Seat 2 564930 564930 30 22
14 Seal Ring, Body Bushing 4 564929 564929 2
15 O-Ring, Bearing Cap 1 030362 030371
16 Grease Fitting 2 564225 564225 12
17 O-Ring, Stem Adapter 1 030072 030016 1
18 Handwheel 1 565172 564984
19 Tap End Stud 12 565174 564934 14
20 Hvy. Hex Nut 12 020000 020014
21 Stem Packing 2 565316 564937 9
22 Injector Plug 1 564226 564226 10
23 Hex Head Bolt 1 010242 070016
24 Gate Guide 2 565160 564933 7
25 Thrust Bearing 2 565318 070017-2
24
26 Bearing, Race 4 565319 070013-3
27 Hex Nut 1 020006 020006
13
28 Nameplate 1 564220 564220
29 Rivet 4 010658 010658 33 8
30 Check Valve 1 N/A 564379 35
31 Protector/Indicator, Stem 1 N/A 564915 32 D
32 Extension, Stem 1 N/A 564979 31
33 Pipe Plug, Hex, HD. 1 N/A 066324
D
34 Screw, Anti-Rotation 1 N/A 564908
35 Body Extension 1 N/A 564914
C
C

B
B
Size & Pressure (psi) A AA B C D E F

7!/16"-5000
Hyd./Man. Flanged 33 33 30%/8" 28 30 32 68!/2" A A
7!/16"-5000
25 25 30%/8" 28 30 32 68!/2"
Hyd./Man. Studded
7!/16"-10000
34 34 32 34 30 32 68!/2"
Hyd./Man. Flanged
7!/16"-10000
25 25 32 34 30 32 68!/2"
Hyd./Man. Studded
7!/16"-15000
Hyd./Studded 23 25 35&/8" 17!!/16" 30 34(/16" 69!/8"

21
 TYPE BR, 7!/16" 15,000 HYDRAULIC GATE VALVES

7!/16" 15M
Item
Part Qty. (Studded 15
No. 46 47
w/Ports)
1 Body 1 565110 36
2 Body Extension 1 565116
3 Stem Protector/Indicator 1 565117 14
4 Body Bushing 2 565118 50 51
5 Seat Ring 2 565119 23
6 Gate 1 565112
7 Bonnet 1 565111
8 Stem Extension 1 565114 13
9 Packing Gland 1 565120
10 Cylinder 1 565121 12 33 34 35
11 Piston 1 565115
12 Blind CylinderHead 1 565122 49 48
13 Adjusting Nut 1 565123 45 27
14 Locking Screw 1 565124
15 Handwheel 1 565925 11 26
16 Stem 1 565126
17 Ring Gasket, Bonnet 1 050909
16 10
18 Retainer Plate 2 565127
38 39 9 24 25
19 Stem Packing 2 565113
20 Stem Pin 1 565128
21 Seal Ring, Body Bushing 2 565129 52
37
22 Seal Ring, Seat 2 565130
23 O-Ring, Adjusting Nut 1 030023 31
24 O-Ring, Stem 2 030072
29 30
25 O-Ring, Packing Gland 1 030077
26 Cup Seal 2 070018 -1
27 Wear Ring 2 565132 19
18
28 Pipe Plug 2 066327
29 Gland 1 564148
7
30 Plug 1 564149 6 17
31 Relief Fitting 1 564542
32 Set Screw 2 010012 22
33 Thrust Bearing 2 070017-1
34 Thrust Washer 1 070013-1 21
35 Thrust Washer 1 070013-2
1 4
36 Grease Fitting 1 050267
37 Grease Fitting 1 070014
5
38 Cap Nut 16 565133
39 Stud, T.E. 16 565134
40 Hex Nut 8 020010
41 Stud, A.T. 8 014046
42 Gate Guide 2 565131 8
43 Nameplate 1 564220
28 2
44 Rivet 4 010658
45 Half Coupling 1 070015
46 Hex Nut 1 020006
47 Hex Bolt 1 070016 3
48 Bearing Retainer 1 565135
49 Piston Locknut 1 565136
50 A.T. Studs 32 010418
51 Hex Nut 32 020000
52 O-Ring, Cylinder 2 030639

22
FLOGUARD CHECK VALVES

The Better Check Valve For In-

Line Flow Control
Control Flow offers an in-line check valve that
provides maximum flow, low turbulence,
reduced slam, positive shutoff, and long life with
minimum maintenance. A durable, spring-
loaded check valve which seals effectively
against back pressure in the line, but readily
opens to normal pump or flow pressures.
The name is FloGuard

Exceptional Design Features

Assure Dependable,
Economical Operation
Each FloGuard valve utilizes an unthreaded,
field-replaceable seat and Control Flow's
exclusive inside blowout preventer design for its
sealing poppet. This simple, yet reliable, sealing
system has been field-proved for many years in
the most demanding drilling environments.
FloGuard in-line check valves come in 2"
through 8" sizes and working pressures up the
5,000 psi with a wide choice of body trims and
end connections. The body, seat and poppet are
manufactured from solid alloy steel, resulting in
added strength and longer valve life than
competitive cast valves.

23
 FLOCHECK

Plug, Bonnet
FloCheck™ is a one-way drop type check valve Stud
especially designed to help you save on Nut
maintenance and valve replacement costs. It is fully Bonnet
repairable in-line and features an exclusive seat Seal, Bonnet
design that virtually eliminates wear on the valve Spring
body. NOTE: The seat can be resurfaced if wear is Valve (Poppet)
not excessive.
Each FloCheck™ valve is carefully
manufactured, inspected and tested to ensure long, Seat
trouble-free service in the most demanding
Seal, Seat
environmental conditions. All valve sizes have face-
to-face dimensions identical to API gate valves and Body
API flanged end connections are standard. Buttweld,
clamped and studded end connections are provided
on request. Spare parts, including all seals, are
available from stock. And, since FloCheck End Cover
incorporates the same poppet design used in many
popular mud pumps, spares are available worldwide
through numerous supply stores.

Item Part Qty. 2!/16" 5M 2!/16" 10M 2!/16" 15M 2(/16" 5M 2(/16" 10M 2(/16" 15M 3!/8" 5M 3!/16" 10M 3!/16" 15M 4!/16" 5M 4!/16" 10M 4!/16" 15M
1 Assembly 1 560310 560325 560340 560579 560577 560575 560355 560370 560385 560405 560420 560435
2 Body 1 560450 560452 560464 560580 560578 560576 560471 560478 560485 560492 562499 560506
3 Bonnet 1 560513 560514 560515 560573 560516 560582 560516 560517 560518 560519 560520 560521
4 Seat 1 560523 560525 560527 560574 560528 560528 560528 560530 560532 560534 560536 560538
5 End Cover 1 560570 560571 560572 560570 560581 560581 560540 560541 560542 560543 560544 560545
6 Valve (Poppet) 1 560546 560546 560546 560546 560549 560549 560549 560549 560549 560552 560552 560552
7 Spring 1 560555 560555 560555 560555 560556 560556 560556 560557 560558 560559 560559 560559
8 Cap Screw 4 010725 010752 N/A 010725 N/A N/A N/A N/A N/A N/A N/A N/A
9 Seal, Bonnet 1 030606 560583 N/A 030606 560583 560583 030613 560590 N/A 030626 N/A N/A
2 N/A N/A 560565 N/A N/A N/A N/A N/A 560566 N/A 560564 560564
10 Seal, Seat 1 030592 030118 N/A 030592 N/A N/A N/A N/A N/A 030684 N/A N/A
2 030604 560565 N/A 030604 N/A N/A N/A N/A N/A 030852 N/A N/A
3 N/A N/A 560565 N/A 560584 560584 030672 560584 560566 N/A 030702 560564
11 Stud 8 011001 011042 N/A 011001 N/A N/A N/A N/A N/A N/A N/A N/A
12 N/A N/A N/A N/A 011040 N/A 560567 N/A N/A N/A N/A N/A
16 N/A N/A 011004 N/A N/A 011040 N/A 011007 011041 011040 011010 011014
12 Nut 8 020004 020001 N/A 020004 N/A N/A N/A N/A N/A N/A N/A N/A
12 N/A N/a N/A N/A 020003 N/A 020003 N/A N/A N/A N/A N/A
16 N/A N/A 020009 N/A N/A 020003 N/A 020001 020003 020003 020003 020011
13 Plug, Bonnet 1 066326 066326 564149 066326 066326 066326 066326 066326 564149 066326 066326 066326
Gland,
14 1 N/A N/A 564148 N/A N/A 564148 N/A N/A 564148 N/A N/A N/A
Autoclave
Screw, Seat
15 2 010630 0106331 N/A 010630 010663 010663 010663 010663 010699 010663 010697 010697
Retainer
Back-Up Ring
16 3 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 560589 N/A
(Seat)

24
 TERMS & CONDITIONS

1. General: No orders shall be considered as accepted by CON- 6. Consular Invoices: No consular fees for legalizing invoices,
TROL FLOW INC., AND FLOCON PRODUCTS, INC. until ap- stamping bills of lading, or other documents required by the laws
proved at our office in Houston, Texas. These terms and condi- of any country or destination are included in quotations or selling
tions apply to all sales made by us. Any purchase order received prices unless specified. If instructed in writing, we will take out
by CONTROL FLOW INC., AND FLOCON PRODUCTS, INC. shall consular documents and make declarations as Agent of the pur-
be construed as a written acceptance of all of our terms and con- chaser, but assume no responsibility for any fines or other charges
ditions of sale. Unless specifically accepted in writing, no other imposed due to errors or incorrect declarations.
terms and conditions shall apply. Additional information, specifi- 7 Change of design: We expressly reserve the right to change
cations, and recommendations may be obtained by writing us at or modify the design and construction of any product, in due course
our Houston office. of our manufacturing procedure, without incurring any obligation
2. Terms of Payment: Our domestic terms are net 30 days af- or liability to furnish or install such changes, modifications or im-
ter shipment or offer to ship if delayed by customer’s request. Ex- provements on products previously or subsequently sold.
port terms require a confirmed irrevocable letter of credit opened 8. Prices: Prices are subject to change without notice. Our mini-
through a prime U.S. Bank, unless otherwise specified. Boxing, mum charge per invoice is $50.00 U.S. Cost of export boxing and
cartage, freight, insurance, handling, labor, rental and similar ex- preparation is based on 3% of total list price or minimum charge
penses are net cash upon receipt of invoice. at current market price.
3. Guarantee: We warrant all products of our manufacture to be 9 Quotations: Requests for quotations should be sent to CON-
free from defects and against failure due to workmanship or mate- TROL FLOW INC.., AND FLOCON PRODUCTS, INC., P.O. Box
rials for a period of one year but no longer from date of invoice: 40788, Houston, Texas 77420, U.S.A. All quotations and sales are
provided, however, that our liability under said warranty shall be ex-works, point of manufacture unless stated otherwise. Unless
and the same hereby is expressly limited to repairing or furnishing otherwise agreed in writing, quotations are valid for 30 days from
for replacement, free of charge, FOB our factory, any part of any date of quotation. Unless otherwise agreed in writing, loading, light-
such product that proves to be defective in workmanship or mate- erage, wharfage, freight, landing charges, dues, duties or any other
rial under normal use and operation, and provided further than charges are not included in quotations or indicated by any price
written notice of such defect or failure is given to us within thirty list. All taxes are required by law on a sale will be added to the net
days from the occurrence thereof and such part is returned to us sales price. All prices and discounts, now in effect, or hereafter
at our factory, carrying charges prepaid, within the said one year issued, are subject to change without notice.
period of warranty; provided, further that with respect to any parts
not wholly of our manufacture this warranty is limited in extent to 10. Cancellations: When an order has been accepted by CON-
the warranty, if any, which we may have received with respect TROL FLOW INC., AND FLOCON PRODUCTS, INC., it may not
thereto from the manufacturers of any such parts and to the ac- be cancelled without our written permission. Cancellation terms
tual extent that we are able to enforce it. will include compensation, as necessary, to us for expenses in-
curred after such an order has been accepted. Orders for prod-
Except as above set forth, there shall be no other warranty of ucts or parts of special design size or materials are not subject to
fitness or merchantability or other warranty or liability whether cancellations after we have accepted order. Orders cancelled due
expressed orally or in writing, or implied in fact or imposed to United States Department of Commerce not granting an export
by statute, and in no event shall we or our agents or employees license are subject to cancellation charge.
be liable for injury or damage to any person or property whatso-
ever or for any special, indirect, secondary, or consequential dam- 11. Returns: Written permission must be obtained before return-
age of any nature however arising. ing material to us for credit. When written permission is acquired,
shipment must be returned to location as specified via prepaid
4. Delivery: We endeavor to ship all materials within the time freight. Material will be subject to our inspection before credit can
promised by us, but do not guarantee to do so. No claims for dam- be issued. A restocking charge will be made on all orders returned
ages or delays due to failure to deliver will be allowed unless a for credit, or costs that may be necessary to return material to
written agreement between both parties specifically allows for salable condition. No material will be accepted for credit one year
claims against later delivery. All agreements are subject to delays from date of purchase. Products of special design or equipment
caused by strikes, lockouts, accidents, fire or other casualty, acts altered to fit customer’s specifications will not be accepted for credit.
of God, war, insurrection, the elements, shortage of raw materials
and labor, governmental orders, or restrictions and any circum- 12. Compliance with Statues & Regulations: CONTROL FLOW
stances beyond our control. Our responsibility ceases upon deliv- INC., AND FLOCON PRODUCTS, INC. warrants and certifies that
ery to any common carrier. We do not insure shipments beyond in performing this order it will comply with all applicable statutes,
the point of delivery to a carrier unless previously instructed by rules, regulations and orders of the United States and of any state
purchase order. All materials for export are packed to the best of or political subdivision thereof including laws and regulations per-
our ability so that they will not be damaged, rust or deteriorate in taining to labor, wages, hours, equal opportunity (Executive Order
transit but we do not guarantee against such damage. 11246) and other conditions of employment, applicable price ceil-
ings, if any, and that the articles delivered hereunder shall be pro-
5. Insurance: We will place insurance as nearly as possible in duced in compliance with the Fair Labor Standards Act.
accordance with the written instructions of our customers, but we
assume no liability for the placing of such insurance or as to the
ultimate recovery in case of breakage, damage or loss.

31