Scribd
Upload
63 views3 pages

013 - SAS Operating Work Station (OWS)

The document provides instructions for testing a SAS Operating Work Station (OWS). It outlines the responsibilities of the CSD Engineer, CSD Technician, and Contractor Testing Engineer. The Contractor Testing Engineer is instructed to check that the OWS has the correct hardware specifications, including video cards, Ethernet cards, RAM, hard drive size, operating system, processor, and number of serial and Ethernet ports. References for other relevant documents and a revision history are also included.

Uploaded by

Ahmed Khanky
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
63 views3 pages

013 - SAS Operating Work Station (OWS)

The document provides instructions for testing a SAS Operating Work Station (OWS). It outlines the responsibilities of the CSD Engineer, CSD Technician, and Contractor Testing Engineer. The Contractor Testing Engineer is instructed to check that the OWS has the correct hardware specifications, including video cards, Ethernet cards, RAM, hard drive size, operating system, processor, and number of serial and Ethernet ports. References for other relevant documents and a revision history are also included.

Uploaded by

Ahmed Khanky
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

NATIONAL GRID SA

Title: Index Number:


WI-NG-6460-002-013
SAS Operating Work Station (OWS ) Testing Page Number:
2 of 3

e. Technical manuals

3.2 CSD Engineer /Technician


a. Witnessing all related test conducted by the testing engineer.
b. Verifying the test results with respect to the acceptance criteria wherever
applicable
c. Dually signing the test formats prepared by the testing engineer
d. Archiving the completed test results as per the approved archiving system.
3.3 Contractor Testing Engineer

The contractor testing engineer shall Follow the instructions below for
conducting the SAS operating Work Station (OWS) testing.

Check as per the hardware specification the OWS has the correct number of
following:

a. Video card
b. Ethernet card
c. Serial card
d. RAM
e. Hard Drive number and size.
f. Operating System
g. Type of Processor
h. Number of Serial port o/p used for IEC 101 protocol connection
i. Number of Ethernet RJ45 port o/p used for IEC 104 protocol connection
j. Power supply module

Archiving System Website: http://AMAS TP-NG-6250-001-007


NATIONAL GRID SA

Title: Index Number:


WI-NG-6460-002-013
SAS Operating Work Station (OWS ) Testing Page Number:
3 of 3

4.0 REFERENCES

Index Number Title


PR-NG-6460-002 Project Commissioning
CL-NG-6460-002-001 SAS Prerequisites Check List C
DS-NG-6460-002-005 Operator Work Stations And Maintenance Laptop Function Test
Format
CL-NG-6460-002-002 Check List of SAS–Substation Automation System

5.0 REVISION HISTORY

Version Date Brief Description of Change / Annual Review


00 2018-02-26 Initial issue of National Grid Work Instruction

This document shall comply in accordance with the existing Company’s Rules and Regulations.
Any modifications therein found not conformance with the document shall be declared invalid.
For clarification and verification on this document, contact the following:

Engr. Khalid Ali Habiballah


Technical Support and Coordination Division
Commissioning Services Department
Technical Services Business Unit
Extension No. 77476 Email: [email protected]

Archiving System Website: http://AMAS TP-NG-6250-001-007

You might also like