Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    C - RP 7 - Tamper Switch TS-20 Series - Stamped

    Uploaded by

    ebcunha.pti
    The TS-20 series tamper switch from George Risk Industries has an adjustable plunger that can be recessed from 1/4 to 1/2 inch and has a diameter of 3/8 inch, the smallest in the industry. It is designed to be easy to install and replace older mechanical tampers. The switch has a screw down flange for positive retention and 12 inch leads, and supervisory loops or longer leads can be requested. It comes with a lifetime warranty.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    C - RP 7 - Tamper Switch TS-20 Series - Stamped

    Uploaded by

    ebcunha.pti
    24 views2 pages
    The TS-20 series tamper switch from George Risk Industries has an adjustable plunger that can be recessed from 1/4 to 1/2 inch and has a diameter of 3/8 inch, the smallest in the industry. It is designed to be easy to install and replace older mechanical tampers. The switch has a screw down flange for positive retention and 12 inch leads, and supervisory loops or longer leads can be requested. It comes with a lifetime warranty.

    Original Title

    C_RP 7_tamper Switch TS-20 Series - Stamped

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The TS-20 series tamper switch from George Risk Industries has an adjustable plunger that can be recessed from 1/4 to 1/2 inch and has a diameter of 3/8 inch, the smallest in the industry. It is designed to be easy to install and replace older mechanical tampers. The switch has a screw down flange for positive retention and 12 inch leads, and supervisory loops or longer leads can be requested. It comes with a lifetime warranty.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views2 pages

    C - RP 7 - Tamper Switch TS-20 Series - Stamped

    Uploaded by

    ebcunha.pti
    The TS-20 series tamper switch from George Risk Industries has an adjustable plunger that can be recessed from 1/4 to 1/2 inch and has a diameter of 3/8 inch, the smallest in the industry. It is designed to be easy to install and replace older mechanical tampers. The switch has a screw down flange for positive retention and 12 inch leads, and supervisory loops or longer leads can be requested. It comes with a lifetime warranty.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Tamper Switch

    WWW.GRISK.COM

    TS-20 Series

     Recessed adjustable plunger from 1/4” to 1/2”


     3/8” diameter (Smallest in the industry!)
     Easy to install  Replaces old mechanical tampers TS-20
     Strong spring action  Press to fit
     12” #22 AWG leads
     Screw down flange on TS-20 for positive retention
     Longer leads, zip cords or jacketed cable upon request
     Hermeticalled sealed
     Plated contacts resist sticking or freezing
     Travel distance total .250; pre-travel is .105 ± .035
     Mounting hardward included
     Supervisory loops upon request
    TSC-20
     Lifetime Warranty

    Part Numbers
    Closed Loop Open Loop SPDT
    Screw down flange TS-20 TS-30 TS-40
    Clip mounted TSC-20 TSC-30 TSC-40

    WARRANTY: Lifetime warranty against workmanship, material and factory defects.


    TOLL-FREE 1-800-445-5218
    GEORGE RISK INDUSTRIES, INC. TOLL-FREE 1-800-523-1227
    G.R.I. PLAZA (308) 235-4645
    KIMBALL, NE 69145 FAX (308) 235-3561
    WWW.GRISK.COM Made in U.S.A. E-MAIL: [email protected]
    C_RP 7_tamper switch TS-20 series
    Tamper Switch
    WWW.GRISK.COM

    INSTALLATION APPLICATIONS
    GEORGE RISK INDUSTRIES, INC.

    TS-20 series
    KIMBALL, NE 69145
    The adjustable plunger actuated GEORGETS series was
    RISK INDUSTRIES, INC. developed to provide a tamper switch with a smaller diameter for
    or roller ball type switch is too large. Built to Scale
    www.grisk.com
    applications where a normal plunger
    TS-20 series
    The 3/8” diameter is ideal for a variety of
    1-800-445-5218 KIMBALL, NE 69145
    www.grisk.com
    E-MAIL: [email protected]
    door and window applications. 1-800-445-5218
    The oval flange allows the switch to be solidly anchored Built
    where to Scale
    needed. The design
    E-MAIL: [email protected]
    also resists locking problems caused by expansion or contraction. Available with a bracket for box tamper. Made
    of nylon for flexibility, the stainless steel spring and sealed contact insure a long service life.

    TS-20 1.80 in
    (45.7 mm) 1.80 in
    .80 in 1.30 in (45.7 mm)
    .375 in
    (20 .3 mm) (33.3 mm) 1.30 in (9.5 mm)
    .80 in .375 in
    (20 .3 mm) (33.3 mm) (9.5 mm)
    1.43 in
    (36.3 mm) 1.43 in
    .60 in (36.3 mm)
    (15.2 mm) .60 in
    (15.2 mm)

    TSC-20 1.80 in
    (45.7 mm) 1.80 in
    (45.7 mm)

    .80 in 1.81 in .375 in


    (20 .3 mm) .80 inmm)
    (46 1.81 in (9.5 mm) .375 in
    (20 .3 mm) (46 mm) (9.5 mm)
    .25 in
    (6.3 mm) .25 in
    (6.3 mm)
    .87 in
    (22.2 mm) .87 in
    (22.2 mm)

    GRI PRODUCTS MEET OR EXCEED THESE MINIMUM GENERAL SPECIFICATIONS:


    Electrical Reed Max. Initial Contact Max. Contact Max. Switching Max. Switching
    Part Number Loop Type Configuration Form Resistance (Ω) Rating (W) Voltage (VDC) Current (A)
    TS-20 Closed N/O A .115 10 200 .500
    TSC-20 Closed N/O A .115 10 200 .500
    TS-30 Open N/C B .140 5 175 .250
    TSC-30 Open N/C B .140 5 175 .250
    TS-40 Open/Closed SPDT C .140 5 175 .250
    TSC-40 Open/Closed SPDT C .140 5 175 .250

    WARRANTY: Lifetime warranty against workmanship, material and factory defects.


    TOLL-FREE 1-800-445-5218
    GEORGE RISK INDUSTRIES, INC. TOLL-FREE 1-800-523-1227
    G.R.I. PLAZA (308) 235-4645
    KIMBALL, NE 69145 FAX (308) 235-3561
    WWW.GRISK.COM Made in U.S.A. E-MAIL: [email protected]

    You might also like