4 4

TributeCollection
Food processor

Instructions

Type 3202 FX 3030

www.braunhousehold.com

5722010334-01_FX3030_US.indd 1 19.01.21 15:54

 1 YEAR WARRANTY
Manufacturer warrants, subject to the conditions stated below, that from
the date of purchase, this product will be free from mechanical defects for
a period of ONE (1) year. Manufacturer, at its option, will repair or replace
this product found to be defective during the warranty period. Should this
product become defective by reason of improper workmanship or material
defect during the specified warranty period, Manufacturer will repair or
replace the same effecting all necessary parts replacements for a period
of one year from the date of purchase. Transportation charges on parts, or
products in whole, submitted for repair or replacement, under this warranty,
must be borne by the purchaser.

CONDITIONS: This warranty is valid for the original USA retail purchaser
from the date of initial retail purchase and is not transferable. Keep the
original sales receipt. Proof of purchase is required to obtain warranty
service or replacement. Dealers, service centers, or retail stores do
not have the right to alter, modify or in any way, change the terms and
conditions of this warranty. Warranty registration is not necessary to obtain
warranty on Manufacturer Products. Save your proof of purchase receipt.

ABOUT YOUR PRODUCT WARRANTY: warranty service does NOT apply

if the product damage occurred because of misuse, lack of routine
maintenance, shipping, handling, warehousing or improper installation.
Similarly, the warranty is void if the manufacturing date or the serial number
on the product has been removed or the equipment has been altered or
modified. During the warranty period, the authorized service dealer, at its
option, will repair or replace any part that, upon examination, is found to be
defective under normal use and service.

NORMAL WEAR: This warranty does not cover normal wear of parts or
damage resulting from any of the following: negligent use or misuse of
the product; improper voltage or current; use contrary to the operation
instructions; deviation from instructions regarding storage and
transportation; repair or alteration by anyone other than Manufacturer or
an authorized service center. Further, the warranty does not cover Acts
of God, such as fire, flood, hurricanes and tornadoes. Manufacturer shall
not be liable for any incidental or consequential damages caused by the
breach of any express or implied warranty. Except to the extent prohibited
by applicable law, any implied warranty of merchantability or fitness for
a particular purpose is limited in duration to the duration of the above
warranty. Some states, provinces or jurisdictions do not allow the exclusion
or limitation of incidental of consequential damages or limitations on how
2

5722010334-01_FX3030_US.indd 2 19.01.21 15:54

 long an implied warranty lasts, so the above limitations or exclusion may not
apply to you. This warranty gives you specific legal rights, and you may also
have other rights that vary from state to state or province to province.

HOW TO OBTAIN WARRANTY SERVICE: If your appliance should prove

to be defective within the warranty period, we will repair it, or if we think
necessary, replace it. To obtain warranty service, simply call our Customer
Service Representatives; 855.927.4383, or send the defective product to
Customer Service to the following address:
RELIABLE CARE SERVICE CENTER
2 Alpine Ct
STE 102
Chestnut Ridge, NY 10977
855.927.4383 | [email protected]

© Copyright 2021. All rights reserved

De’Longhi Braun Household GmbH
Carl-Ulrich-Straße 4
63263 Neu-Isenburg/Germany

5722010334-01/1.21 – FX 3030 US

5722010334-01_FX3030_US.indd 3 19.01.21 15:54

 OPERATING INSTRUCTIONS

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and/or injury to persons,
including the following:

READ ALL INSTRUCTIONS

1. Blades are sharp. Handle carefully when removing, inserting or cleaning.
Exercise the same care when removing, inserting the chopping blade or
disc for the food processor and chopper accessories. Always verify that
the accessory enclosure is free of cracks or other damages.

2. The appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instructions concerning use of the appliance by a person responsible
for their safety.

3. Turn the appliance off. Unplug from outlet when not in use, before
putting on or taking off parts, and before cleaning. To unplug, grasp
plug and pull from electrical outlet. Never pull cord.

4. To protect against electrical shock, do not put the motor part, cord or
electrical plug in water or other liquids.

5. The use of attachments, including canning or ordinary jars, not

recommended or sold by Braun may cause fire, electrical shock, or
risk of injury to persons.

6. Regularly inspect the power cord, power plug and actual appliance for
any damage. Do not operate if damaged in any way or after the appli-
ance malfunctions.

7. Return the appliance to the nearest authorized Braun service center for
examination, repair or adjustment.

8. Avoid any contact with blades or moveable parts.

4

5722010334-01_FX3030_US.indd 4 19.01.21 15:54

 9. Do not use outdoors or for anything other than its intended purpose.

10. Keep hands and utensils away from moving blades or discs while
processing food to prevent the possibility of severe injury to persons
or damage to the unit. A scraper may be used, but must be used only
when the unit is not running.

11. To avoid injury, never place cutting blade or discs on base without first
putting bowl properly in place.

12. Be certain cover is securely locked in place before operating appliance.

13. Never feed food by hand. Always use food pusher.

14. Do not attempt to defeat the cover interlock mechanism.

15. Do not fill the bowl above the rated capacity to avoid risk of injury due to
damage to the cover bowl.

16. Do not let cord hang over edge of table or counter, or touch hot surface.

17. Maximum rating is based on the food processor bowl that draws the
greatest power and other recommended attachments may draw signifi-
cantly less power.

18. We suggest you save all packing materials in the event that future ship-
ping of the machine is needed. Keep all plastic bags away from children.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

5722010334-01_FX3030_US.indd 5 19.01.21 15:54

 PARTS DESCRIPTION
See diagram on the following pages

1 Motor block
2 Cord storage
3 Motor switch (on = «I», off = «O»)
4 Pulse mode «»
5 Variable speed regulator (1-15)
6 Food processor bowl
7 Lid for food processor bowl
8 Pusher for lid
9 Blade for food processor bowl with protective cover
10 Insert carrier
11 Fine slicing insert – a
12 Coarse slicing insert – b Optional
13 Fine shredding insert – c
14 Coarse shredding insert – d
15 Grating insert – e
16 French-fries system Optional
17 Kneading hook
18 Whipping attachment
19 Citrus press
21 Chopper/mixer bowl for small quantities
22 Lid for chopper bowl
23 Seal ring for lid
24 Blade for chopper bowl
25 Protective cover for motor drive when bowl has been taken off
26 Safety lock (avoids simultaneous operation of both working bowls)
27 Juice extractor/fine grating attachment (The whole set)
28 Juicer drum
29 Fine grating disc
30 Strainer basket
31 Cover
32 Filling tube
33 Pusher

WASH ALL PARTS BEFORE FIRST USE

Refer to «Cleaning» section

5722010334-01_FX3030_US.indd 6 19.01.21 15:54

 PARTS & ATTACHMENTS

5722010334-01_FX3030_US.indd 7 19.01.21 15:54

 Citrus Press

19 a b
24

c d e f

Juice extractor / Fine grating attachment

27
25 a b c
P
u
ll
open

b
u
tt
o
n
¥

6
¥

33
T
ir
o uv

er
le
ri r

bo
ut
¥

on
šf
fn

5
32
en

Tast
e

31
4
zie
h

en

d e f

3
30

2
29 g h

1
28
Pg 4

5722010334-01_FX3030_US.indd 8 19.01.21 15:54

 IMPORTANT NOTES
Overload Protection:
In order to avoid damages caused by overload, this appliance is equipped
with an automatic security switch which shuts off the current supply if
necessary. In such case, turn the motor switch (3) back to «O» and wait
approx. 15 minutes to allow the motor to cool off before switching on the
appliance again.

Pulse Function 
The pulse mode is useful for the following applications: Chopping delicate
and soft food - eggs, onions, or parsley, carefully folding flour into dough
or batter to maintain the creaminess, or adding whipped eggs or cream to
more solid food.

1. The pulse mode is activated by turning the motor switch to the pulse
position (to the left). The switch does not catch at this setting. Hold the
switch in pulse position or turn it to pulse position repeatedly.
2. Before activating the pulse mode, set the desired speed with the speed
regulator. When releasing the pulse mode the appliance is switched off.
Recommended Speed Ranges for Individual Attachments
Set the speed range by means of the variable speed regulator (5). It is
recommended to first select the speed and then switch on the appliance in
order to work with the desired speed right from the beginning.

ATTACHMENTS SPEED RANGE

Kneading Hook 7
Blade and Whipping Attachment: 6–15
– Egg Whites 4–5

– Cream 2

Slicing, Grating, and Shredding 1–8

Inserts

French-Fry System 1–2

Please also refer to product printing

9

5722010334-01_FX3030_US.indd 9 19.01.21 15:54

 Working With Second Bowl System
1. Only one working bowl can be operated at a time.
2. The working bowl which is not used must be in the upper position or
additionally, can be turned in the «click» direction where it is locked in
place. When the arrow markings are aligned, the bowl can be taken off.
3. For safety reasons, always put the protective cover onto the free drive
shaft after a bowl has been taken off.

Double safety feature

The appliance can only be switched on when the desired working bowl with
lid is properly engaged. If the lid is opened during operation, the motor
switches off automatically. As in this case the motor switch (3) is still on «I»,
turn it back to «O» to avoid switching on the motor accidentally.

ATTACHING THE WORKING BOWLS

The food processor bowl (6) is NOTE: When using the food
operated on the large drive place of processor bowl, always insert
the motor block (1). the required attachments
before adding ingredients.

1. The chopper bowl is operated on A

the small drive place. With the motor
switched off, place the respective bowl
onto its drive place matching the arrow
on the bowl with the arrow on the
motor block (See fig A). 1 1
2
2
Then turn the bowl in the «function»
direction until the lower fixed stop is
reached. The bowl on the other drive
place must be in the lifted position.
If the other drive place is free, put on B
the protective cover (25).

2. Put the attachment needed

(see instructions for each of the
attachments) onto the drive shaft of
the bowl and push it down as far as it click

will go (see fig B).

10

5722010334-01_FX3030_US.indd 10 19.01.21 15:54

 When inserting the blade onto the C
1
chopper bowl (21), push it down until it
audibly snaps in place. 1

3. Put the lid onto the bowl matching 2

the arrow on the lid with the arrow on
the bowl (see fig C). Then turn the lid
click

clockwise guiding its nose into the

pulse

safety lock opening of the motor block off/0

(1) until it audibly snaps in place.

Note: When attaching the lid of the chopper bowl (22), it must be provided
with the seal ring (23).

REMOVING THE WORKING BOWLS

1. Switch off the appliance.

2. Turn the lid counter-clockwise and lift it off. Then turn the bowl in the
«click» direction until the arrow on the bowl matches the arrow on the
motor block and lift off the bowl.

3. When removing the blade from a bowl, take hold of it by the knob and
pull it off. Caution: The blades are very sharp!

4. The blade comes with a protective cover. If not in use, store the blade
on the protective cover.

Note: If you continue turning the food processor bowl in the «click»
direction as far as it will go, beyond the stop position, you can lock the food
processor bowl on the motor part. In this position, however, you cannot
switch on the motor.

11

5722010334-01_FX3030_US.indd 11 19.01.21 15:55

 KNEADING

For kneading you can use the kneading hook, or

17 - Kneading Hook the blade. For best results, we recommend using
the kneading hook which is specially designed for
OR making yeast dough, pasta, and pastries. Use the
chart below for kneading dough.

CAUTION: Do not use the kneading hook for

heavy mixtures such as cake.
9 - Blade

Dough Max Capacity Speed Time

Yeast Dough 2 cups flour plus other 7 1½ Min
ingredients
Pasta Dough 2 cups flour plus other 7 1½ Min
ingredients
Pastries 2 cups flour plus other 7 1 Min
ingredients

Yeast Dough (Breads & Cakes - use blade)

1. Pour flour into the food processor bowl, then add other ingredients
except liquids.

2. Put on the lid and lock into place. Set the food processor to speed 7 and
switch the appliance on.

3. Add liquids by pouring them through the filling tube of the lid while the
motor is running.

Note: when kneading with the blade, do not add ingredients like raisins or
nuts which are not supposed to be cut. These have to be added manually
after removing the kneaded dough from the food processor bowl.

12

5722010334-01_FX3030_US.indd 12 19.01.21 15:55

 Pasta Dough
1. Pour flour into the food processor bowl, then add other ingredients
except liquids.
2. Put on the lid and lock into place. Set the food processor to speed 7 and
switch the appliance on.
3. Add liquids by pouring them through the filling tube of the lid while the
motor is running.
Note: Do not add any liquid after the dough has formed into a ball as then
the liquid will no longer be absorbed evenly.

Pastries
1. Pour flour into the food processor bowl, then add other ingredients. For
best results, butter should not be too hard or too soft.
2. Put on the lid and lock into place. Set the food processor to speed 7 and
switch the appliance on.
3. Stop kneading the dough shortly after a ball has formed. Otherwise the
pastry dough will become too soft.

MIXING

For mixing cake dough or sponges use the blade. The

kneading hook is not suitable for mixing cake doughs or
sponges. Max capacity 2 cups flour plus other ingredients.
9 - Blade

Cake Mixtures
Method One
1. Cream butter, sugar, and eggs on speed 6 for 1 minute
2. Pour in milk on speed 6 for 15 seconds.
3. Set the food processor to speed 15, using the “pulse” function, carefully
fold in flour; pulse 10-15 times.
Method Two
1. Pour all ingredients except liquids into the food processor bowl, process
ingredients on speed 15 for 1 minute.
2. Add liquids through the filling tube of the lid while the motor is running.
3. Add ingredients like raisins and nuts manually.
Sponge Doughs
1. Cream eggs and water on speed 15 for 2 minutes.
2. Add sugar and process on speed 15 for 4 minutes.
3. On speed 8, fold in flour using the pulse function 5 times.
4. Add cocoa powder using the pulse function 3 times.
13

5722010334-01_FX3030_US.indd 13 19.01.21 15:55

 BLENDING

Use the blade for blending soups and shakes etc. Do not fill
the processor bowl above 8 cups to keep the bowl from
overflowing.
9 - Blade

1. Pour coarsely chopped fruit into the food processor bowl.

2. Put on the lid and lock into place. Set the food processor to speed 15
and switch the appliance on.
3. Set the food processor to speed 10, add liquid through the filling tube
and process until blended.
Note: When blending milk, please note that it will froth. Use smaller
quantities.

Chopping
Chopping in the food processor bowl with the blade (9)
Note: For processing larger quantities, use the food processor bowl (6)
with blade (9). For processing smaller quantities, we recommend to use
the chopper bowl (21) with blade (24).

USING THE CHOPPER BOWL

The blade (24) can be used for chopping, blending, puréeing and mixing
smaller quantities. The chopper bowl is perfectly suited for preparing
mousse, pastes or dips.
Maximum capacity: 3 cups liquid.

Caution: The blade is extremely sharp.

Important: The maximum processing time in the chopper bowl is
1 minute. Liquids can be processed longer.
Chocolate, hard spices and coffee beans may not be chopped.

1. With the motor switched off, insert the blade (24) in the chopper bowl
(21), then place all ingredients into the chopper bowl.
2. Liquids can be poured through the opening in the lid (22) when the
motor is running.
3. Put the lid with the seal ring (23) onto the chopper bowl and close it as
described earlier. After use, always remove the blade from the chopper
bowl first and then empty the processed food. When blending milk,
please note that it will froth. Use smaller quantities.
14

5722010334-01_FX3030_US.indd 14 19.01.21 15:55

 The processing times are approximate and depend on the quality, the amount of
food to be processed and the required degree of fineness.

Chopping
Product Max. Preparation Speed Mode Time/Pulses
Amount
Carrots 1⅓ Cup in pieces 6 P 7x
Onions 1½ onion quartered 6 P 6-8x
Parsley ½ bunch without stems 15 I 5-10 sec.
Garlic 1 clove whole 15 I 5 sec.
Meat (lean) ½ lb quartered 15 I 15 sec.

Blending
Product Preparation Speed Mode Time/Pulses
Mixed Chop fruit before 15 I approx.
Drinks processing. Add milk. 30 sec.
Baby Food Chopped 15 P 10x
(e.g. Fruit & I 10 sec.
vegetables)
Mayonnaise Blend 1 egg, seasoning, 15 I 30-45 sec.
mustard, and vinegar. Slowly
pour in oil through lid opening.
Tartar Blend 1 egg, seasoning, 15 I 30-45 sec.
mustard, and vinegar. Slowly
pour in oil through lid opening.
Add quartered egg and vinegar. 6 P 3-5x
Avocado Chop 1 clove garlic, add 2 15 I 15 sec.
ripe avocados (quartered,
w/o pit), 1 Tbsp lemon juice,
1 Tbsp olive oil,
⅔ cup yogurt,
½ tsp sugar,
salt, pepper 15 I ca. 45 sec.

Mixing smaller dough quantities Speed Mode Time/Pulse

The chopper bowl is only suitable for
processing the following dough type; the
recipe reflects maximum quantities:
Pancake mixture 6 I 45-60 sec.
1 cup flour Mix the flour, eggs,
1.5 cup milk salt and half of the
2 eggs milk, add rest of the
salt milk while the motor
Whipping cream is running. 6 I 30 secs.
6.76 oz cream
15

5722010334-01_FX3030_US.indd 15 19.01.21 15:55

 SLICING, SHREDDING, GRATING
1. Place the insert you want to use
C
into the insert carrier and snap into
position (see figure C). In order to
remove the insert, push up the insert a
end that protrudes at the bottom of
the insert carrier.

2. Press the assembled slicer/shredder

onto the drive shaft of the food
processor bowl (see figure D).

3. Put the lid onto the bowl and lock D

into place. Set the speed and fill the
food to be processed into the filling
tube while the motor is switched off.
Refilling should be done with the
motor switched off.

4. Never reach into the filling tube when the motor is running.
Always use the pusher (see figure E).

E
1

Note: When processing juicy or soft food, you will obtain better results at a
lower speed. Hard food should be processed at a higher speed. Do not
overload the processor bowl. Refer to the chart below to choose the
appropriate attachment for desired food to be processed.

16

5722010334-01_FX3030_US.indd 16 19.01.21 15:55

 SLICING, SHREDDING, GRATING
Insert Speed Processing Examples
11. a - Fine 1-2 Cucumbers, Cabbage, Raw
Slicing Potatoes, Carrots, Onions,
Radishes
12. b - Coarse 1-2 Cucumbers, Kohlrabi, Raw
Slicing Potatoes, Onions, Bananas,
(Optional) Tomatoes, Mushrooms,
Celery
13. c - Fine 3-6 Cheese (soft to medium),
Shredding Cucumbers, Carrots, Raw
Potatoes, Apples
14. d- Coarse 3-6 Cheese (soft to medium),
Shredding Cucumbers, Kohlrabi, Beetroot,
Carrots, Raw Potatoes,
Apples, Cabbage
15. e - Grating 8-15 Raw Potatoes, Horseradish,
Parmigiano Cheese (hard)

16. f - French Fry 1-2 Place the French-fries system

System onto the drive shaft. Put on the
(Optional) lid and lock in place. For best
results, place 3 - 4 potatoes
(depending on size) in the
filling tube of the lid while
the motor is switched off. Set
speed to 1 - 2 and switch on the
appliance. Before filling in a
new load, switch the motor off.
Use the pusher to apply slight
pressure when pushing the
potatoes into the filling tube.

17

5722010334-01_FX3030_US.indd 17 19.01.21 15:55

 WHIPPING

Use the whipping attachment for light whipping only.

Use the kneading attachment or blade for whipping
heavy mixtures.
18 - Whipping
Attachment

Whipping Sponge Cakes - Max 2½ cups flour plus ingredients

1. Cream eggs and water on speed 5 for 2 minutes.
2. Add sugar on speed 5 for 2 minutes
3. On speed 1 fold in flour for 30 seconds.

Whipping Egg Whites

• Min 2 egg-whites: speed 4-5 for 4 minutes
• Max 6 egg-whites: speed 4-5 for 6 minutes
Whipping Cream
• Min 0.15-0.2: speed 2 for 1-2 minutes
• Max 0.4: speed 2 for 3½ - 4 minutes
NOTE: Before whipping sterilized cream, keep the cream cool for several
hours (at 39 °F approx.).

18

5722010334-01_FX3030_US.indd 18 19.01.21 15:55

 JUICING

Use the citrus juicer to make fresh squeezed juice.

Use caution when pressing juice, do not press too hard.
19 - Citrus Press

1. Remove lid from food processor bowl a

(see figure a).

2. Attach citrus press to food processor b

bowl by aligning the arrow on the
citrus press with the arrow on the food
processor bowl, then rotate the citrus
press clockwise (see figure b). 1
2

3. Cut citrus fruit (orange, grapefruit, c

lemon, etc.) in half. Set the food
processor speed to 3 and turn on.
Juice fruit by pressing fruit halves onto
citrus press until all the fruit juice
is gone from the fruit (see figure c).
Repeat until desired amount of juice is
acquired.

4. To pour your fresh juice, rotate citrus d

press counter-clockwise (see figure d).

19

5722010334-01_FX3030_US.indd 19 19.01.21 15:55

 5. Hold citrus press in place and pour
freshly squeezed juice into a clean e
glass (see figure e).

6. To remove citrus press from food f

processor bowl rotate the citrus press
to align the arrows on the citrus press
and the food processor bowl and lift 2
(see figure f).

JUICE EXTRACTOR
FINE GRATING ATTACHMENT
After unpacking the appliance, please disassemble it and clean all parts.

1. Unlock the strainer basket (30) by a

turning it clockwise and wash all parts
by hand. (fig a)

2. Pull the key in the bottom of the juicer b

drum (28) as far as it will go. (fig b) P
u
ll
open

b
u
tt
o
n
¥
¥

T
ir
o uv

er
le
ri r

bo
ut
¥

on
šf
fn
en

Tast
zie e
h

en

20

5722010334-01_FX3030_US.indd 20 19.01.21 15:55

 3. Turn the juicer drum counter-clockwise d
with the key in the bottom of the juicer
drum pulled – until the fine grating disc
(29) is unlocked. (fig d)

4. Then pull the fine grating disc by its shaft e

out of the juicer drum. (fig e)

Assembly
Attach the food processor bowl (without the blade) to the motor block and
lock it in place.

Juice Extracting: f
1. Insert the fine grating disc into the juicer
drum so that the cut-out sections in the
rim of the fine grating disc slide over the
holding studs in the juicer drum.

2. Push the fine grating disc by its shaft d

slightly down and turn it clock-wise until
it clicks in.

21

5722010334-01_FX3030_US.indd 21 19.01.21 15:55

 3. Check by trying to turn the shaft of the fine grating disc whether the
grating disc is properly locked. If it is, the shaft cannot be turned.

4. Insert the strainer basket into the juicer drum, and ensure that both tabs
fit into the notches of the drum.

5. For juice extracting set the assembled juice extractor on the food
processor bowl drive shaft.

6. Place the cover on the food processor bowl so that the arrow on the
cover matches the arrow on the food processor bowl. Then turn the
cover clockwise until the nozzle on the cover is in the safety lock on the
motor block and audibly snaps into place. To remove, turn the cover
counter-clockwise.

Extracting Juice
Maximum capacity: 2 cups or when the pulp space is full. You can extract
juice from fruits, as well as from vegetables.

Preparing fruits or vegetables

First wash or peel the food. Fruits with pits should always have the pits
removed first. Citrus fruits, as well as fruits with skin and vegetables
(e.g. red beets and Kiwi-fruits) should be thoroughly peeled. Seed fruits
(e.g. apples) can be processed with peels and cores.

Speed selection
Select the setting 7–8.

Extracting
Turn on the motor. Fill the prepared fruits or vegetables into the filling tube
(32) and push it down with the pusher (33).
Caution: Always use the pusher. Never reach into the filling tube while
the motor is running! Do not overload the appliance.

Disassembling:
Turn off the motor. Turn the cover 4 anti-clockwise and remove it from the
food processor bowl. Remove all parts from the food processor bowl. If
the fruit pulp is very dense, pull the disengaged strainer basket 3 out of the
juicer drum 1 by using the pull rings.

Grating (Use the fine grating disc only)

The fine grating device is designed for very fine grating of food such as hard
cheese (e.g. Italian parmigiano cheese or Swiss sprintz cheese), horse-ra-
dish (e.g. for horse-radish cream), apples and carrots (e.g. for baby food).
Important: The fine grating disc is not suited for grating chocolate.
22

5722010334-01_FX3030_US.indd 22 19.01.21 15:55

 Preparing the food for grating
Fruits and vegetables should be washed first or peeled. Seeds and cores
should be removed. Cut off the crust from cheese. The food should be cut
small enough to fit into the filling tube.

Speed selection
Select the setting 7–15.
Note: Hard food should be grated at higher speeds.

Grating
Turn on the motor.
Fill the prepared food into the filling tube and push it down with the pusher.
Caution: Always use the pusher. Never reach into the filling tube while
the motor is running!

Disassembling
Turn off the motor. Turn the cover counter-clockwise and remove it from the
food processor bowl. Then remove the fine grating disc from the food pro-
cessor bowl.

CLEANING
Always make sure to switch off the motor and unplug the appliance.
Clean the motor block with a damp cloth only.
Blades are sharp! Use caution when cleaning the blades.

• Hand wash only. DO NOT WASH ANY PART OF THE UNIT IN THE
DISHWASHER!
• To clean the lid, first remove the seal ring (23). Put the seal ring back in
place after cleaning. You can use the seal ring from both sides.
• Color-intensive food such as carrots may leave stains on the plastic
parts; wipe them off with cooking oil before cleaning with water.
• Do not use sharp objects for cleaning purposes.
• Clean the blades and the inserts very carefully - they are very sharp! Take
hold of the knob only.

DO NOT SUBMERGE THE BASE UNIT OR CORD INTO

WATER OR ANY OTHER LIQUID.
THIS MAY DAMAGE THE FOOD PROCESSOR.
23

5722010334-01_FX3030_US.indd 23 19.01.21 15:55

 RELIABLE CARE SERVICE CENTER
2 Alpine Ct STE 102
Chestnut Ridge, NY 10977
855.927.4383 / [email protected]

5722010334-01_FX3030_US.indd 24 19.01.21 15:55