63.

5mm

Quick Start Guide Playing Music ● Play the bluetooth earphone and bluetooth Specifications
Answer call Ringing Short press “MFB”
● Pairing
mode on: Press and hold untill LED To use the bluetooth earphone to listen to music form a bluetooth Can’t perform pairing device closely together when performing
Bluetooth version: B.T.4.2
flashes red and blue. device, you must first perform pairing with the bluetooth device End call Calling Short press “MFB” pairing
Bluetooth chipset: WT200
1. MFB ● Power off: Press and hold untill flashing LED off using the A2DP audio profile.
WIRELESS EARPHONES Reject calling Ringing
Press and hold
Sound is distorted
Check that no other devices utilizing the
● Support bluetooth profiles: A2DP, AVRCP, HFP
● Re-start: Press and hold untill LED flashes red “MFB” for 2S 2.4GHz wavelength are nearby, and that
● When sound volume is set to maximum or minimum levels a beep Frequency used: 2.4GHz (2400MHz to 2480MHz)
and blue(After without any operations for 5S) when playing music
sound will be produced from the bluetooth earphone. no obstructions black the signal path. Operating distance: about 10 m line of sight
2. If you already connected with a device, you only need to power ● Depending on the specifications of the connected bluetooth Troubleshooting ● Confirm that bluetooth earphone and
Operate voltage :3.7V
on the bluetooth earphone by depress the “MFB” for 3S, then they device, the controls noted above and controls on the bluetooth bluetooth device are connected using the Battery: 80MAH
will automatically connect. Problem description Remedy Charging time: about 2 hours
device may not be supported. Can’t use the hands profile HFP or HSP. If connection that to the
● To connect with others, depress the “MFB” by 5S or more to en Power won’t turn on Recharge the bluetooth earphone free operation bluetooth device is in profile A2DP, it may be Charging current: 100MA
-ter pairing mode, then search the pairing name on your device. Charging the Batteries necessary to change connection profiles Playing time: up to 6 hours (middle volume)
● Confirm that computer is ON or NOT.
● Disconnecting from the bluetooth device by holding the “MFB” (depending on the specifications of the Talking time: up to 6 hours
The unit’s battery must be recharged before use. The batteries can’t ● Confirm that computer is not in power Driver:10mm
depressed for about 5S to turn off the power. bluetooth device).
Connect the appropriate connector on the micro-USB cable to the not charge when use saving mode.
90mm

Press once: Decrease

3. If the pairing is not successful, please switch off headset firstly Sensitivity: 95dB/1mW (S.P.L at 1KHz)
volume micro-USB port on the headphones, and the USB plug on the other ● Check that no other devices utilizing the
Press and hold: Return to and then re-pair again. computer or AC adaptor ● Confirm the micro-USB cable is securely Impedance: 16Ω
previous track
Play / pause 4.Only one device can be connected at a time. end to a USB port on a computer or AC adapter. for charging connected to both the bluetooth earphone Communication distance 2.4GHz wavelength(including microwave Frequency Range: 20Hz - 20kHz
Press once: Increase ● When recharging begins, the LED indicator on the headphones
and computer/ AC adaptor. is short, sound is garbled. ovens, wireless radios, etc.) are nearby. Rated Power: 1.5mw
volume Bluetooth Pairing and that no obstructions block the signal
will light red. Full recharging requires about 2H. ● Confirm that power is turned on for both Max. Power: 10mw
Press and hold: Advance
1. Depressed “MFB” for 5S or more to enter the pairing mode. Can’t perform bluetooth path.
to next track
● When recharging is completed, the LED indicator will light blue. bluetooth earphone and bluetooth device.
LED indicator’s flashing blue and red. connection
● Confirm that bluetooth function is turned
● When the battery’s charge is approaching depletion, a beep sound
● If pairing is not completed within about 5 minutes, the power ON in the device you are connecting to. ! Note
will automatically turn off. will be heard in the headphones at one-minute intervals. ADD:
●Confirm that power is turned on for both ● Battery recharging time and usable battery time may vary depen No.35,the 2nd Industrial Zone,Tangxiayong Village,Songgang
2. Click the pairing name “ITFIT-A08C ”on your device, and connect it . -ding on ambient temperature and frequency of use.
bluetooth earphone and bluetooth device. Town,Bao'an District,Shenzhen,China.
3. Pairing successful : LED indicator flashes blue at the intervals Phone calls operation ● Confirm that connection with bluetooth
● Do not place metal objects near the headphones’ charging contacts,

of 3S. The PIN code for these wireless earphone has been factory device is set for profile A2DP. since dangerous electrical shorts or abnormal heating may result.
Accessories Functions Status of headset Operation
set at “0000”. Input this code if requested by the bluetooth device. No sound when playing ● Confirm that the connected music playback ● Please don’t attempt to change the rechargeable lithium Battery
Short press MFB music that should last the life time of the device.
WIRELESS EARPHONE
Redial Last number Standby mode device is set for PLAY.
twice quickly
● Confirm that sound volume controls on ● Please turn off your headset after your usage to get a longer
Matching OK
ITFIT-A08B

Volume up Conversation mode Press once “+” button both bluetooth earphone and music battery life. Not all the mobile phones support all the functions
playback device are set to appropriate listed above. Please refer to the instruction of your mobile phone.
Accessories

USB Cable Manual

Volume down Conversation mode Press once “-” button levels. ● Some functions and indication tones may vary with mobile phones.
Earphone S/M/L Ear tips USB Cable Manual 1 2 3 Copyright 2019 ITFIT All rights reserved

FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.