Scribd
Upload
31 views3 pages

Brake Warning Light Circuit

The document provides information about diagnosing issues with the ABS and EBD system on a 2004 Toyota Corolla, including: - The brake warning light circuit and how the ECU uses it to indicate issues and record Diagnostic Trouble Codes. - A wiring diagram of the ABS with EBD system. - A 5-step inspection procedure to methodically check the parking brake switch circuit, brake fluid level warning switch circuit, look for short circuits or open circuits, and inspect the combination meter and connectors between components.

Uploaded by

Musa Tandiarrang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
31 views3 pages

Brake Warning Light Circuit

The document provides information about diagnosing issues with the ABS and EBD system on a 2004 Toyota Corolla, including: - The brake warning light circuit and how the ECU uses it to indicate issues and record Diagnostic Trouble Codes. - A wiring diagram of the ABS with EBD system. - A 5-step inspection procedure to methodically check the parking brake switch circuit, brake fluid level warning switch circuit, look for short circuits or open circuits, and inspect the combination meter and connectors between components.

Uploaded by

Musa Tandiarrang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

05–338

DIAGNOSTICS – ABS WITH EBD SYSTEM (April, 2003) 057UO–04

BRAKE WARNING LIGHT CIRCUIT

CIRCUIT DESCRIPTION
If the ECU detects trouble, it lights the brake warning light at the same time of prohibiting ABS control. At
this time, the ECU records a DTC in memory.
Connect terminals Tc and CG of the DLC3 to make the brake warning light blink and output the DTC.

2004 COROLLA (RM1037U)

Author: Date: 503


05–339
DIAGNOSTICS – ABS WITH EBD SYSTEM (April, 2003)

WIRING DIAGRAM

Skid Control ECU


C9 with Actuator
Combination Meter
5 30
W–R W–R
IA6 S1 WA
37
R–W
4 Center J/B
ABS 18 21
W–B W–B
4B 4B
2

RH J/B Instrument Panel J/B


16 22 2 GAUGE
R–W
3B 3B IG

IG1 Relay
1
W
IA
I10 Ignition SW 5 3
2 4
W B–Y W–B
IF IF
1 2
AM1 IG1 1 2
12 AM1 1
W W
IF IB

Engine Room J/B


1
W
1C
1 ALT 1
W
1D 1A
2 1
FL MAIN
B
A
J6
J/C A

Battery IE

F42890

2004 COROLLA (RM1037U)

Author: Date: 504


05–340
DIAGNOSTICS – ABS WITH EBD SYSTEM (April, 2003)

INSPECTION PROCEDURE
1 INSPECT PARKING BRAKE SWITCH CIRCUIT

(a) Check for open and short circuit in parking brake switch circuit (See page 01–30).
NG REPAIR OR REPLACE PARKING BRAKE
SWITCH CIRCUIT

OK

2 INSPECT BRAKE FLUID LEVEL WARNING SWITCH CIRCUIT

(a) Check the brake fluid level in reservoir.


(b) Check for open and shot circuit in brake fluid level warning switch circuit (See page 01–30).
NG REPAIR OR REPLACE BRAKE FLUID LEVEL
WARNING SWITCH CIRCUIT

OK

3 CHECK DTC ONCE MORE

(a) Check for open and short circuit in harness and connector between vacuum warning switch and skid
control ECU (See page 05–297).
NG REPAIR CIRCUIT INDICATED BY OUTPUT
CODE

OK

4 INSPECT COMBINATION METER ASSEMBLY(BRAKE WARNING LIGHT CIRCUIT)

(a) Check for open and short circuit in combination meter (See page 01–30).
NG REPAIR OR REPLACE COMBINATION METER
ASSEMBLY

OK

5 CHECK HARNESS AND CONNECTOR(BRAKE ACTUATOR – COMBINATION


METER)

(a) Check for open and short circuit in harness and connector between brake actuator and combination
meter (See page 01–30).
NG REPAIR OR REPLACE HARNESS OR
CONNECTOR

OK

CHECK AND REPLACE BRAKE ACTUATOR ASSY

2004 COROLLA (RM1037U)

Author: Date: 505

You might also like