Machine Model

Wire Diameter Range (Millimeters)

AFE-2D4
2mm - 4mm
AFE-2D6
2mm - 6.4mm
AFE-2D8-T
2mm - 8mm
AFE-2D10
*4mm - 10mm
AFE-2D10-T
*4mm - 10mm
AFE-2D12-T
*4mm - 12mm
AFE-2D4
AFE-2D6 AccuForm E-Series
Wire Diameter Range (Inches)
Max. Wire Tensile At Max. Wire Diameter
0.080”- 0.160”
620 N/mm²
0.080”- 0.250”
620 N/mm²
0.080”- 0.313”
620 N/mm²
0.160”- 0.394”
620 N/mm²
0.160”- 0.394”
620 N/mm²
0.160”- 0.472”
620 N/mm²
AFE-2D8-T Val ue in CNC Wire Bending
A F E - 2 D10
(kPSI) 90 kPSI 90 kPSI 90 kPSI 90 kPSI 90 kPSI 90 kPSI
A F E - 2 D10 - T
A F E - 2 D12 - T
Performance Specifications
AFE-2D shown without safety barrier for display purposes.
Feeder Axis #1

2
Wire Feed Resolution (Millimeters) 0.0001mm 0.0001mm 0.0001mm 0.0001mm 0.0001mm 0.006mm
Wire Feed Resolution (Inches) <0.00001” <0.00001” <0.00001” <0.00001” <0.00001” <0.00001”
Max wire feed speed (Meters) 156 m/min 156 m/min 152 m/min 149 m/min 149 m/min 145 m/min
Max wire feed speed (Feet) 511’ f/min 511’ f/min 506’ f/min 488’ f/min 488’ f/min 475 f/min

Bender Axis #2
Bender Resolution <0.0001° <0.0001° <0.0001° <0.0001° <0.0001° <0.0001°
Max Bender speed 2500°/sec 2500°/sec 2500°/sec 1200°/sec 1200°/sec 1200°/sec
Max Bender angle +/- 200° +/- 200° Unlimited +/- 200° Unlimited Unlimited SERIES

Turret Axis #4
Turret Axis ToolChange time N/A N/A 250 mSec N/A 250 mSec 250 mSec

Set-Up Time
Same Wire Diameter 1 minute 1 minute 1 minute 1 minute 1 minute 1 minute
Change feeder rollers & Bending tools 8 minutes 8 minutes 8 minutes 8 minutes 8 minutes 8 minutes

Power Consumption, Electrical & Air Requirements

Average Power Consumption (KW/h)** 1.6 1.9 2.3 2.5 2.6 2.8
Electrical requirement 50/60 Hz 400V or 460V, 3 phase - all models***
Installed Power 23KVA 23KVA 39KVA 40KVA 40KVA 42KVA
Air requirements 100 PSI @ 2 SCFM - all models
Operating Temperature 15-40 degrees Celsius (59-104 degrees Fahrenheit)
Operating Humidity 10-90% - all models

Dimensions & Weight (Machine weight only / not for shipping)

Width, Depth & Height (meters) 2m x 1.5m x 2.13m
(inches) 82” x 60” x 84”
Gross weight (Kg) 1860 Kg 1930 Kg 2040 Kg 2040 Kg 2130 Kg 2130 Kg
Gross weight (Lbs) 4100 Lbs 4250 Lbs 4500 Lbs 4500 Lbs 4700 Lbs 4700 Lbs
* Machines can form wire down to 2mm with additional tooling. Automated Industrial Machinery, Inc. ©2017
** Power Consumption Data is measured on average production. The Manufacturer Reserves the right to alter
*** Specify on Order. any data and/or photos provided in this
brochure without notice.

FORMING OUR FUTURE WITH YOURS

www.AIMmachines.com
® ®
EUROPE SA
For online videos visit: Automated Industrial Machinery Europe S.A.
www.youtube.com/wirebenders
502 S. Vista Avenue, Addison IL 60101-4423, U.S.A. Kapetan Korela 16, Nea Kiffisia, Attiki 14564, GREECE
Phone: +1(630)458-0008 Fax: +1(630)458-0730 Phone: +30 21300 58004 Fax:+30 21300 57768
e-mail: [email protected] e-mail: [email protected]
Skype id: aimincusa Skype id: aimeuropesa
AccuForm E-Series TURRET HEAD Indexing Tool Changer
Replaceable Dual Acting,

FEATURES & BENEFITS

Concurrent Operations: Dual processor allows
AFE-2D4
AFE-2D6
AFE-2D8-T
2 Bending Mandrels Hydraulic Wire Cutter

programming a part while running production A F E - 2 D10

Production Statistics for cost estimating & scheduling
A F E - 2 D10 - T
A F E - 2 D12 - T
DXF file import & optional 3D Step file import SERIES

Animation / Bending simulation allows you to see

programmed moves before running production Graphic Representation of Installed Tools on Machine.

Available remote, off-line programming with stand-

alone software or through installed network card

Color touch screen monitor and industrial grade sealed

keyboard for data entry
Programmable Programmable Roller
®
Simple programming with Windows Pro based Hard Bending Pin Bending Pin
operating system
Turret head machines offer two programmable bending
Exceptional accuracy and repeatability pins. The Hard Bending Pin is used to form intricate
bends and long running jobs, where tool wear may SmartCode for Automatic Programming of frames,
Sealed, oversize bearings for low maintenance eye loops, rings & spirals.
operation over time become an issue. The Roller Pin is used to produce
arcs that need to be generated, with minimal marks on
Wire fed directly from coil the wire. The tool cluster is the “heart” of the bender
containing round pins, a roller and sharp bend dies.
A variety of servo drive options for combinations of
faster feed and bending speeds This variety allows the use of one tool set to accomplish
many styles of bends; including a “press brake” style
Double acting hydraulic cutting system for high tensile bend, when the radii of the bends are significantly less
wire on machines larger than 6mm capacity than the wire diameter. When the bending pins and tool
One keystroke transition between metric and English cluster are coupled together they provide the user with
units of measure up to 8 tooling combinations. The dual acting cutter
produces burr-free square cuts and delivers a "zero
Optional video camera for machine monitoring or length" cutoff.
videoconferencing

Merge individual part programs for production of

complete assemblies or program to make alternating Non-Turret Configuration
parts
Sharp Die or Roller Configuration Possible
Programmable delay or hold functions to match
downstream operations in work cells
Animation Simulation.
“Shown here with optional Welder AWE-12i and Servo transfer system”
Spiral software function allows user to define any spiral *AFE-2D shown without safety barrier for display purposes.
with just three numbers BEST VALUE
Simple design and PC controls allow for easy service, high speed, reduced setup
Easily accessible tooling for minimal setup and time and an attractive price. Each E-Series machine incorporates high-end
changeover time components, "four wheel drive" feeders, quick setup straighteners, the latest
technology in servo positioning, “dial-a-service”, NEMA 12 with temperature
Hardened and ground tool steel moving parts for control electronics cabinet. E-Series machines carry a one year parts and labor
warranty!
exceptional wear and tool life
Hard Pin or
EASY PROGRAMMING Guillotine Cutter
Optional I/O's for interconnection of auxiliary Roller Pin Available
Bend complex two dimensional wire parts with very simple programming. With
equipment such as robotics, threaders, & inspection our new graphics viewer the user can envision the part before production.
devices Connect to Internet for fast upgrades and service. The Non-Turret configuration has been tried and tested
in the field for more than two decades. Although it lacks
Highest overall production speeds in the industry ROBUST ENGINEERING the flexibility of the Turret Head it gains an advantage of
With 25 years of experience these models are made to last. The hallmark of an
Ethernet & USB ports AIM machine is it’s operational consistency over time. Performance specifications cutting and forming in the same area without indexing
are extremely high and Reliability is built into the design. the tools. This characteristic reflects less time to make a Simple Programming Interface. SmartEditor® helps
figure out machine movements. User only needs to add
Two bending head choices: Single stage or Turret
EXPANDABILITY part, leading to a higher production rate. feed length, bend angle, radius size & tool configuration.
Head indexing tool changer are available Optional accessories include Threading, Press, Drilling, Chamfering units, DC Mid
Frequency automatic welders, Servo Transfer system and Robotics integration. Dual Size Straightener Rollers
Temperature controlled electronics cabinets with for Wide Range of Wire Diameters
washable filters

Automatic Critical Maintenance reminders with User

Control

AFE-2D SERIES