Oct 15, 2023
Product data sheet HAVSO2S0022GSM
Characteristics Variable speed drive, SOLAR, 2.2 kW 220V, 1 phase, HD, 1 phase motor
Main
Range of product SOLAR
Product or component type Variable speed drive
Product specific application Solar pump
Network number of phases 1 phase
220 V AC - 15...15 %
[Us] rated supply voltage
150...440 V DC
Supply voltage type support AC/DC
Supply frequency 50...60 Hz
Motor power kW 2.2 kW for heavy duty
Motor power hp 2.9 hp for heavy duty
21 A during 1 min (heavy duty)
Maximum transient current 25.2 A during 3 s (heavy duty)
28 A during 0 s (heavy duty)
Sensorless vector control (SVC)
Asynchronous motor control profile
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Voltage/frequency ratio (V/f)
Speed drive output frequency 0…400 Hz
Continuous output current 14 A
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Complementary
Product destination Asynchronous motors
MPPT function
Auto start-run-stop
Energy/flow calculator
Function available
Neither Himel nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Pump cleaning
Multi-speed operation
Energy saving mode
Type of cooling Fan
Regulation loop Adjustable PID regulator
Acceleration and deceleration ramps Linear adjustable separately from 0.01 to 6500 s
Frequency resolution Analog input: 0.05/50 Hz
Analogue input number 1
AI1 voltage: 0...10 V
Analogue input type
AI1 current: 0...20 mA
Discrete input number 4
Discrete input type Programmable (DI1...DI4)
Analogue output number 1
Analogue output type AO1 voltage/current: 0...20 mA or 0...10 V
Discrete output number 2
configurable relay logic 250 V (3 A) for NO relay output circuit
configurable relay logic 250 V (3 A) for NC relay output circuit
Discrete output type configurable relay logic 30 V DC (3 A) for NO relay output circuit
configurable relay logic 30 V DC (3 A) for NC relay output circuit
open collector 9...30 V (50 mA)
Output frequency 50 kHz for pulse output at DO1
Display type 5 digits 7 segments for 39 parameters
Device application Speed control
Type of installation Indoor/outdoor
Manual using keypad
Control type Using control terminal
Using serial port
Wall mounted
Device mounting
DIN rail
Speed accuracy +/- 0.5 % of nominal speed
Overcurrent
Overvoltage
Undervoltage
Overheating
Protection type
Overload
Short-circuit
Phase loss
Low light protection
Width 145 mm
Height 230 mm
Depth 177.4 mm
Environment
Relative humidity 0…95 % without condensation
Ambient air temperature for storage -20…65 °C
Quality labels CE
Operating altitude = 1000 m
IP degree of protection IP20
Vibration resistance 5.9 m/s²
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Contractual warranty
Warranty 24 months
