PDS100005195 - A

PRODUCT DATA SHEET

SPRING LOADED TOOL (4-1/2 IF)

Rev ECN No. Date Reviewed By Approved By Status

A 1079972 5-Nov-02 Moody, Ryan Simmons, Micah RELEASED

Summary:

Rig book data sheet for running the Spring Loaded tool.

Subject to contractual terms and conditions to the contrary, this document and all the information contained herein are the confidential and exclusive
property of FMC Technologies, and may not be reproduced, disclosed, or made public in any manner prior to express written authorization by FMC.
 PDS100005195 - A
Spring Loaded Tool
The Spring Loaded tool combines in a single tool the features of running and retrieving tool with a BOP test
plug while providing large flow-by. The tool also retrieves the wear bushings and annulus seal assemblies.

The tool is used to run wear bushings and pressure test the BOP stack in a single trip. If a wear bushing is
being run, the retrieval ring is placed in the retracted position. The wear bushing is then locked to the tool by
screwing the wear bushing shear pins in until they stop in the mating profile. The tool is run and lands in the
wellhead housing and the tool is over pulled with 10,000 lbs to ensure bushing is latched into the housing.
5000 lbs weight above the tool allows the mandrel to drop by about four inches, closing the flow-by allowing
for pressure testing. To retrieve the tool, lift straight out with approximately 25,000 lbs (111 KN) over pull,
which will be required to shear the pins between tool and bushing.

When a wear bushing is being retrieved, the retrieval ring is set in its expanded position. The tool is run and
it will lands off on top of the wear bushing. A straight over pull of 55,000 lbs (245 KN) is required to retrieve
the wear bushing.

The Spring Loaded tool:

• provides 14.1 square inches (9097 mm2) flow-by area.

• has a spring loaded mandrel which allows flow-by during running and retrieval and closes
off the flow-by (with 5,000 lbs running string weight ) during BOP pressure tests.

• has torque keys which anti-rotate the body relative to the mandrel for ease of running
through the riser.

• the mandrel is provided with 4-1/2” IF box up and pin down connections.

• is provided with a rugged, field proven cup seal which seals in the wellhead housing bore
when pressure testing.

• is designed to release from the wear bushing or seal assembly at approximately 220,000
lbs (978 KN) overpull in the event that the wear bushing will not come free from the
housing.

• all seals are easily installed or removed with the use of threaded sleeves.

Subject to contractual terms and conditions to the contrary, this document and all the information contained herein are the confidential and exclusive
property of FMC Technologies, and may not be reproduced, disclosed, or made public in any manner prior to express written authorization by FMC.
 PDS100005195 - A

Spring Loaded Tool

Subject to contractual terms and conditions to the contrary, this document and all the information contained herein are the confidential and exclusive
property of FMC Technologies, and may not be reproduced, disclosed, or made public in any manner prior to express written authorization by FMC.
 PDS100005195 - A
Spring Loaded Tool (4-1/2 IF)
Part No. 18-920-138

Parts List
Item Part No. Description Qty
1 18-920-141 Body 1
2 18-920-139 Mandrel 1
3 18-920-151 Cup Seal Retainer 1
4 18-920-146 Landing Ring 1
5 18-920-153 Coil Spring, 10.00 OD x 12.00 Free Length x 1.00 Wire DIA 1
6 18-920-143 Mandrel Retainer 2
7 18-920-150 Anti-rotation Key 1
8 18-920-148 Polypak Retainer 1
9 18-920-145 Release Ring 1
10 18-920-144 Retrieval Ring 1
11 18-920-147 Anti-rotation Key 1
12 79-030-334 Socket Head Capscrew, 0.750-10UNC-2A x 1.750 LG 12
13 48-120-067 Grease Fitting, 1/4-18NPT, Straight 2
14 79-030-644 Flat Head Capscrew, 0.500-13UNC-2A x 1.250 LG 1
15 79-030-212 Socket Head Capscrew, 0.375-16UNC-2A x 0.500 LG 1
16 79-030-256 Socket Head Capscrew, 0.500-13UNC-2A x 0.750 LG 1
17 48-082-202 O-ring, Nitrile, 0.275 DIA CS x 10.975 ID 1
18 48-082-201 O-ring, Nitrile, 0.275 D CS x 11.975 ID 1
19 18-902-174 Cup Type Packing 1
20 48-081-085 O-ring, Nitrile, 0.275 DIA CS x 14.975 ID 1
21 48-090-459 Non-extrusion Ring, Nitrile, 0.236 CS x 15.024 ID 2
22 48-082-802 Polypak, 12.00 OD x 11.00 ID 1
23 79-030-368 Socket Head Capscrew, 0.625-11UNC-2A x 1.750 LG 2
24 48-122-200 Alemite Grease Fitting, Straight 2
25 48-350-130 Thread Protector (Pin) 1
26 48-350-131 Thread Protector (Box) 1

Subject to contractual terms and conditions to the contrary, this document and all the information contained herein are the confidential and exclusive
property of FMC Technologies, and may not be reproduced, disclosed, or made public in any manner prior to express written authorization by FMC.
 PDS100005195 - A
Spring Loaded Tool
Part No. 18-920-138

Drawing No.1105DU2006443

TECHNICAL DATA
OD ( maximum ) 18.555” 471.3 mm

ID (minimum ) 3.0” 76.2 mm

Overall Length 41.7” 1,059 mm

Dry Weight 1,295 lbs 586.6 kg

Rated Working Pressure 15,000 psi 1,034 bar

2 2
Flowby Area 14.1 in 91 cm

Top Connection API NC50 (4-1/2 IF)

Bottom Connection API NC50 (4-1/2 IF)

Downward Load Required to Compress Spring ~5,000 lb 2,270 kg

and Close Flowby
Torque to make up drillpipe connections 22,000 lb ft 30 kN-m

Load to retrieve Annulus Seal Assembly ~25,000 lb 111 kN

Load to retrieve Wear Bushing ~55,000 lb 245 kN

Load to retrieve SL Tool from Wear Bushing ~25,000 lb 111 kN

Subject to contractual terms and conditions to the contrary, this document and all the information contained herein are the confidential and exclusive
property of FMC Technologies, and may not be reproduced, disclosed, or made public in any manner prior to express written authorization by FMC.
 PDS100005195 - A

Subject to contractual terms and conditions to the contrary, this document and all the information contained herein are the confidential and exclusive
property of FMC Technologies, and may not be reproduced, disclosed, or made public in any manner prior to express written authorization by FMC.