06 Válvulas III

+34 986 288118
Servicio de Att. al Cliente
Valve technology
for over 75 years
g i n e e red.
io n. En
Precis
IMI Buschjost
valves
The constant research > Extensive use of patented IMI > Solenoid pilot operator available to
and continuing innovation Buschjost Click-on® coils directly mount to the valve actuator
behind the IMI Buschjost > ATEX versions available CLICK-ON® BENEFITS
name has helped to create a > Diaphragm (up to 16 bar) and piston > Valve core tube completely
market leader in process and (up to 40 bar versions available) sealed – fluid cannot escape
multimedia valves, which can > Range covers direct, indirect > Solenoid can be removed and
and forced lift versions replaced without tools
be found in a huge variety
of applications worldwide. PRESSURE OPERATED VALVES > Can be rotated through 360°
In fact, in Germany, IMI Buschjost > Port sizes G1/4 to G2 > Cannot be over tightened
process valves are amongst > Diaphragm and piston versions leading to damage to valve
only three brands which are SIL available up to 16 bar depending > Totally IP65 protected
certified for use in power plants. upon size and actuator type
SOLENOID OPERATED VALVES: > Range of body and seal materials to

cover most industry applications
> Port sizes from G1/4 to G2 plus
> Suitable for fluid viscosities
options of flange connections
up to 600 centistokes and Engineering
> Range of body and seal materials to
cover most industrial applications
fluids with contamination GREAT Solutions
Polígono Industrial O Rebullón s/n. 36416 - Mos - España - [email protected]

+34 986 288118
2/2-WAY DIRECTLY OPERATED VALVES

3 Series 82510, 82610
VALVES
• 2/2-way seat valves

Technical Data
• G1/8 … 3/8
Switching function: Mounting position:
• Suitable for vacuum
Normally closed Optional, preferably solenoid
• High flow rate vertical on top
Flow direction:
• Functional compact design Determined
• Body with M5 fastening
thread as standard
• Solenoid interchangeable
without tools (Click-on®)
• Valve operates without pressure
differential (Zero delta P)
82510 (82520) 82610 (84620)

Medium Neutral gases and liquids Neutral and slightly aggressive gases and liquid fluids
Port size G1/8 … 3/8 (1/8 … 3/8 NPT) G1/8 … 3/8 (1/8 … 3/8 NPT)
Operating pressure 0 … 10/25/40/70 bar 0 … 10/25/40/70 bar
Temperature
Media temperature -10°C … +90°C -10°C … +110°C
Ambient temperature -10°C … +50°C -10°C … +50°C
Material
318
Body Brass (CW617N) Stainless steel (1.4408)

Seat seal NBR FPM
Internal parts Stainless steel, brass Stainless steel
Models - Valves normally closed Models - Valves normally open

Port Orifice Series 82510 Operating Series 82610 Operating Port Orifice Series 82510 Operating Series 82610 Operating
size (mm) Model pressure Model pressure size (mm) Model pressure Model pressure
(bar) (bar) (bar) (bar)
G1/8 1,5 8251800.910x.xxxxx 0 … 25 8261803.910x.xxxxx 0 … 25 G1/4 1,5 8251001.910x.xxxxx 0 … 16 8261001.910x.xxxxx 0 … 16

G1/4 1,5 8251000.910x.xxxxx 0 … 25 8261003.910x.xxxxx 0 … 25 G1/4 2,5 8251021.910x.xxxxx 0…6 8261021.910x.xxxxx 0…6
G3/8 1,5 8251100.910x.xxxxx 0 … 25 8261103.910x.xxxxx 0 … 25 G1/4 2,5 8251021.915x.xxxxx 0 … 25 8261021.915x.xxxxx 0 … 25
G1/8 1,5 8251807.915x.xxxxx 0 … 70 8261807.915x.xxxxx 0 … 70 G1/4 3 8251041.910x.xxxxx 0…3 8261041.915x.xxxxx 0…3
G1/4 1,5 8251007.915x.xxxxx 0 … 70 8261007.915x.xxxxx 0 … 70 G1/4 3 8251041.915x.xxxxx 0 … 16 8261041.915x.xxxxx 0 … 16
G3/8 1,5 8251107.915x.xxxxx 0 … 70 8261107.915x.xxxxx 0 … 70 G1/4 4 8251061.915x.xxxxx 0…8 8261061.915x.xxxxx 0…8
G1/8 2,5 8251820.910x.xxxxx 0 … 10 8261823.910x.xxxxx 0 … 10
G1/4 2,5 8251020.910x.xxxxx 0 … 10 8261023.910x.xxxxx 0 … 10
G3/8 2,5 8251120.910x.xxxxx 0 … 10 8261123.910x.xxxxx 0 … 10 Options
G1/8 2,5 8251820.915x.xxxxx 0 … 40 8261823.915x.xxxxx 0 … 40
• Seat seal EPDM
G1/4 2,5 8251020.915x.xxxxx 0 … 40 8261023.915x.xxxxx 0 … 40
G3/8 2,5 8251120.915x.xxxxx 0 … 40 8261123.915x.xxxxx 0 … 40 • Seat seal FPM
G1/8 3 8251840.910x.xxxxx 0…4 8261843.910x.xxxxx 0…4 • Seat seal PTFE
G1/4 3 8251040.910x.xxxxx 0…4 8261043.910x.xxxxx 0…4 • Manual override
G3/8 3 8251140.910x.xxxxx 0…4 8261143.910x.xxxxx 0…4 • Normally open
G1/8 3 8251840.915x.xxxxx 0 … 20 8261843.915x.xxxxx 0 … 20
G1/4 3 8251040.915x.xxxxx 0 … 20 8261043.915x.xxxxx 0 … 20
G3/8 3 8251140.915x.xxxxx 0 … 20 8261143.915x.xxxxx 0 … 20
G1/8 4 8251860.915x.xxxxx 0 … 12 8261863.915x.xxxxx 0 … 12
G1/4 4 8251060.915x.xxxxx 0 … 12 8261063.915x.xxxxx 0 … 12
G3/8 4 8251160.915x.xxxxx 0 … 12 8261163.915x.xxxxx 0 … 12
G1/8 5 8251880.915x.xxxxx 0…6 8261883.915x.xxxxx 0…6
G1/4 5 8251080.915x.xxxxx 0…6 8261083.915x.xxxxx 0…6
G3/8 5 8251180.915x.xxxxx 0…6 8261183.915x.xxxxx 0…6

+34 986 288118

Series 82510, 82610
3
VALVES
Voltage codes and spare coils
Voltage and frequency solenoid
Code Voltage Code Frequency Voltage Frequency Power consumption
Inrush Holding Inrush Holding
9101 *1) 9151 *1)
024 00 24 V d.c. – 8W 8W 18 W 18 W
024 50 24 V a.c. 50 Hz 15 VA 12 VA 45 VA 35 VA
110 50 110 V a.c. 50 Hz 15 VA 12 VA 45 VA 35 VA
120 60 120 V a.c. 50 Hz 15 VA 12 VA 45 VA 35 VA
230 50 230 V a.c. 50 Hz 15 VA 12 VA 45 VA 35 VA
*1) Note: r coil only / up to +55°C ambient temperature.

Further versions on request!
Dimensions
82510/82610 with solenoid 9101

30
36 x 30
20
30
319
36 x 30
32
20
54,5
1
67
2
ø 28,5
P A
32
54,5
1
67
2
ø 28,5 22 ø 28,5
44
P A
42
48,5 x 42
26,5 22 ø 28,5
82510/82610 with solenoid
44 9151
42
48,5 x 42
49,5
26,5
2
72
84,5
1
49,5
ø 28,5
2
P A
72
84,5
22 ø 28,5
ø 28,5
44
P A
22 ø 28,5
44
1 Solenoid rotatable 360°

2 Socket turnable 4 x 90° (Socket included)

+34 986 288118
2/2-WAY FORCE LIFTED VALVES

3 Series 82530, 82560
VALVES
• 2/2-way diaphragm valves

Technical Data
• DN 10, G1/4 … 1/2
• Functional design
• Compact solenoid with vertical on top
Flow direction:
integrated core tube Determined
• Valve operates without differential
pressure (Zero delta P)
• Series 82530:
Operating pressure
0 … 20 bar with alternating
current and NBR sealing
• Series 82560:
Suitable for vacuum
82530 (82630) 82560 (82570)

Medium Neutral gases and liquids Slightly aggressive gases and liquids
Port size G1/4 … 1/2 (1/4 … 1/2 NPT) G1/4 … 1/2 (1/4 … 1/2 NPT)
Operating pressure 0 … 10 bar 0 … 10 bar
Temperature
Material
320
Body Brass (CW617N), PA66 Stainless steel (1.4408), PA66

Seat seal NBR NBR
Internal parts Stainless steel, PVDF Stainless steel, PVDF, Sandvik 1802
Models - Valves normally closed

Port size Orifice Series 82530 Operating pressure Series 82560 Operating pressure
(mm) Model (bar) Model (bar)
G1/4 10 8253000.8001.xxxxx 0 … 10 8256000.8001.xxxxx 0 … 10
G3/8 10 8253100.8001.xxxxx 0 … 10 8256100.8001.xxxxx 0 … 10
G1/2 10 8253200.8001.xxxxx 0 … 10 8256200.8001.xxxxx 0 … 10

Code Code Voltage Frequency Power consumption
Voltage Frequency Inrush Holding
8001
024 00 24 V d.c. – 12 W 12 W
024 50 24 V a.c. 50 Hz 20 VA 16 VA
110 50 110 V a.c. 50 Hz 20 VA 16 VA
120 60 120 V a.c. 60 Hz 20 VA 16 VA
230 50 230 V a.c. 50 Hz 20 VA 16 VA
Options
• Seat seal EPDM
• Seat seal FPM
• Media temperature up to
+150°C with HNBR seat seal

+34 986 288118

Series 82530, 82560
3
VALVES
Dimensions
82530
69,5
35 34
17,5 16 18
20,5
ca. 40
1
H1
2
H
Model Port size B H H1 L T

8253000.8001.xxxxx G1/4 14 87 73 44 21 12
P A
8253100.8001.xxxxx G3/8 14 87 73 44 21 12
R
B
8253200.8001.xxxxx G1/2 14 90 74,5 60 27 15

T
L
82560
69,5
35 34
17,5 16 18
321
20,5
ca. 40
1
H1
2
H
Model Port size B H H1 L T

8256000.8001.xxxxx G1/4 12,5 85,5 73 44 21 12
P A 8256100.8001.xxxxx G3/8 12,5 85,5 73 44 21 12
R
8256200.8001.xxxxx G1/2 14 88,5 74,5 60 27 15

B
T
L


+34 986 288118

3 Series 82540, 82590, 82090, 83040
VALVES
• 2/2-way diaphragm valves

Technical Data Options
• DN 8 … 50, G1/4 … 2
Switching function: • Seat seal EPDM
• Series 82540, 82590, 83040
Normally closed • Seat seal FPM
- High flow rate
- Damped operation Flow direction: • Manual override
- For robust industry Determined • Normally open
- Suitable for vacuum Mounting position:
- Valve operates without differential Optional, preferably solenoid
pressure (Zero delta P) vertical on top
- Solenoid interchangeable without
tools (Click-on®) only solenoid 915x
and 940x
• For systems with low or fluctuating
pressure solutions
• Series 82090:
Functional compact design
82540 (82640) 82590 (84490) 82090 with DVGW approval 83040

Medium Neutral gases and liquids Slightly aggressive Neutral gases and liquid fuels Neutral gases and liquid fuels
gases and liquids
Port size G1/4 … 2 (1/4 … 2 NPT) G1/4 … 2 (1/4 … 2 NPT) G1/4 … 1 DN 15 … DN 50
Operating pressure 0 … 10/16 bar 0 … 10/16 bar 0 … 8 bar 0 … 10/16 bar
Temperature
Media temperature -10°C … +90°C -10°C … +90°C 0°C … +60°C -10 … +90°C
Ambient temperature -10°C … +50°C -10°C … +50°C 0°C … +60°C -10 … +50°C
322
Material
Body Brass (CW617N) Stainless steel (1.4408) Brass (CW617N) Cast steel, brass
Seat seal NBR-K NBR-K NBR-G NBR
Internal parts Stainless steel, PVDF, brass Stainless steel, PVDF Stainless steel, brass Stainless steel, PVDF, brass
Standard models
Port size Orifice Series 82540 Operating Series 82590 Operating Series 82090 Operating Series 83040 Operating
(mm) Model pressure (bar) Model pressure (bar) Model pressure (bar) Model (Flange) pressure (bar)
G1/4 8 8254000.915x.xxxxx 0 … 10 8259000.915x.xxxxx 0 … 10 8209000.917x.xxxxx 0 … 8 – –
G1/4 8 8254000.930x.xxxxx 0 … 16 *1) 8259000.930x.xxxxx 0 … 16 – – – –
G3/8 10 8254100.930x.xxxxx 0 … 16 *1) 8259100.930x.xxxxx 0 … 16 – – – –
G1/2 12 8254200.930x.xxxxx 0 … 16 *1) 8259100.930x.xxxxx 0 … 16 – – – –
– 15 – – – – – – 8304200.915x.xxxxx 0 … 10
– 15 – – – – – – 8304200.830x.xxxxx 0 … 16
G3/4 20 8254300.915x.xxxxx 0 … 10 8259300.915x.xxxxx 0 … 10 8209300.917x.xxxxx 0 … 8 8304300.915x.xxxxx 0 … 10
G3/4 20 8254300.930x.xxxxx 0 … 16 *1) 8259300.930x.xxxxx 0 … 16 – 8304300.830x.xxxxx 0 … 16
G1 25 8254400.915x.xxxxx 0 … 10 8259400.915x.xxxxx 0 … 10 8209400.917x.xxxxx 0 … 8 8304400.915x.xxxxx 0 … 10
G1 25 8254400.930x.xxxxx 0 … 16 *1) 8259400.930x.xxxxx 0 … 16 – – 8304400.830x.xxxxx 0 … 16
G1 1/4 32 8254500.940x.xxxxx 0 … 16 8259500.940x.xxxxx 0 … 16 – – 8304500.940x.xxxxx 0 … 16
G1 1/2 40 8254600.940x.xxxxx 0 … 16 8259600.940x.xxxxx 0 … 16 – – 8304600.940x.xxxxx 0 … 16
G2 50 8254700.940x.xxxxx 0 … 16 8259700.940x.xxxxx 0 … 16 – – 8304700.940x.xxxxx 0 … 16
*1) Note: For liquid mediums and an operating pressure > 10 bar is the maximum allowed differential pressure limited to 2 bar.

Code Code Voltage Frequency Inrush Holding Inrush Holding Inrush Holding
Voltage Frequency 9151/9154 *2) 9301/9304 *2) 9401/9404 *2) *3)
024 00 24 V d.c. – 18 W 18 W 18 W 18 W 38 W 38 W
024 50 24 V a.c. 50 Hz 45 VA 35 VA 106 VA 35 VA 42 VA 42 VA
*2) Note: r coil only / up to +55°C ambient temperature (with the exeption of solenoid 94xx up to 41 V a.c.). *3) A.c. only with rectifier plug. Further versions on request!

+34 986 288118

Series 82540, 82590, 82090, 83040
3
VALVES
Code Code Voltage Frequency
Voltage Frequency Inrush Holding Inrush Holding Inrush Holding Inrush Holding Inrush Holding
9151/9154 *2) *3) 8401/8404 *3) 9401/9404 *2) *3) 8301/8304 *3) 9178/9179 *2)
024 00 24 V d.c. – 18 W 18 W 40 W 40 W 38 W 38 W 22 W 22 W 18 W –
024 49 24 V a.c. 40 … 60 Hz 20 VA 20 VA 45 VA 45 VA 42 VA 42 VA 25 VA 25 VA 20 VA 20 VA
110 49 110 V a.c. 40 … 60 Hz 20 VA 20 VA 45 VA 45 VA 42 VA 42 VA 25 VA 25 VA 20 VA 20 VA
120 49 120 V a.c. 40 … 60 Hz 20 VA 20 VA 45 VA 45 VA 42 VA 42 VA 25 VA 25 VA – –
230 49 230 V a.c. 40 … 60 Hz 20 VA 20 VA 45 VA 45 VA 42 VA 42 VA 25 VA 25 VA 20 VA *4) 20 VA *4)
*2) Note: r coil only / up to +55°C ambient temperature (with the exeption of solenoid 94xx up to 41 V a.c.). *3) Note: A.c. only with rectifier plug. *4) Solenoid 9179. Further versions on request!
Dimensions
82540/82590 with solenoid 915x (10 bar) 82540/82590 with solenoid 930x (16 bar)
48,5 x 42
26,5 45 54,5
49,5
41
2 2
1
323
1
H1
H1
øA øA
H
H
P A P A
R
T T
L1 L1
L L
Model Port size øA H H1 L L1 T Model Port size øA H H1 L L1 T

8254000.915x.xxxxx G1/4 44 104 92,5 60 27,5 12 8254000.930x.xxxxx G1/4 44 104 92,5 60 27,5 12
8254100.915x.xxxxx G3/8 44 104 92,5 60 27,5 12 8254100.930x.xxxxx G3/8 44 104 92,5 60 27,5 12
8254200.915x.xxxxx G1/2 44 108 94,5 67 31 14 8254200.930x.xxxxx G1/2 44 108 94,5 67 31 14
8254300.915x.xxxxx G3/4 50 115 99 80 36,5 16 8254300.930x.xxxxx G3/4 50 115 99 80 36,5 16
8254400.915x.xxxxx G1 62 124 103,5 95 44 18 8254400.930x.xxxxx G1 62 124 103,5 95 44 18
82540/82590 with solenoid 940x (16 bar) 1 Solenoid rotatable 360°

74,5
39 74
77
1
H1
øA
H
Model Port size A H H1 L L1 T

P A
8254500.940x.xxxxx G1 1/4 92 186 157 132 60 20
8254600.940x.xxxxx G1 1/2 92 186 157 132 60 22
8254700.940x.xxxxx G2 109 201,5 167 160 74 24
T
L1
L

+34 986 288118

3 Series 82540, 82590, 82090, 83040
VALVES
82090
Model Port size øA H H1 L
H1
2 8209000.917x.xxxxx G1/4 44 104 92,5 60
H 8209100.917x.xxxxx G3/8 44 104 92,5 60
øA
8209200.917x.xxxxx G1/2 44 108 94,5 67

P A 8209300.917x.xxxxx G3/4 50 115 99 80
R
8209400.917x.xxxxx G1 62 124 103,5 95

R L
B
83040 wih Solenoid 915x (10 bar)

42
48,3
36 30
1
øB
2
H
P A
Model Orifice øB øF F H L
DN
8304200.915x.xxxxx 15 44 96 77 97 130
8304300.915x.xxxxx 20 50 110 86,6 105 150
8304400.915x.xxxxx 25 62 120 95,1 108 160
324
¨F
øF

56 66
1
H
2
øB
P A Model Orifice øB øF F H L
DN
8304200.830x.xxxxx 15 44 96 77 157,5 130

8304300.830x.xxxxx 20 50 110 86,6 170 150
L 8304400.830x.xxxxx 25 62 120 95,1 175 160
¨F
øF

56 66
1
H
2
øB
Model Orifice øB øF F H L
P A
8304500.940x.xxxxx 32 92 140 110,7 158 180
DN
8304600.940x.xxxxx 40 92 150 117,8 162 200

8304700.940x.xxxxx 50 109 165 128,4 171 230
L
¨F
øF


+34 986 288118

Series 86700, 86720, 86740 3
VALVES
• 2/2-way piston valves
Technical Data
• DN 8 … 50, G1/4 … 2
• Valve operates without differential
pressure (Zero delta P) vertical on top
Flow direction:
• Series 86700: Determined
- Valve with PTFE piston guide rings
- Suitable for vacuum
• Series 86720:
- High flow rate
- For steam and hot water
- Damped operation
• Series 86740:
- Valve piston with PTFE guide-ring
86700 (86710) 86720 (86730) 86740 (86750)

Medium Air, water and oil Neutral steam and liquids Slightly aggressive gases and liquid fluids
Port size G1/4 … 2 (1/4 … 2 NPT) G1/4 … 2 (1/4 … 2 NPT) G1/4 … 2 (1/4 … 2 NPT)
Operating pressure 0 … 25/40 bar 0 … 16 bar 0 … 25/40 bar
Temperature
Media temperature -20°C … +90°C 0°C … +200°C -20°C … +90°C
Ambient temperature -20°C … +50°C 0°C … +60°C -20°C … +50°C
Material
325
Body Brass (CW617N) Brass (CW617N) Stainless steel (1.4408)
Seat seal NBR PTFE NBR
Internal parts Stainless steel, PTFE/carbon, brass Stainless steel, PTFE/carbon, brass Stainless steel, PTFE/carbon
Standard models
Port size Orifice Series 86700 Operating pressure Series 86720 Operating pressure Model Operating pressure
(mm) Model (bar) Model (bar) (bar)
G1/4 8 8670000.830x.xxxxx 0 … 25 8672000.840x.xxxxx 0 … 16 8674000.830x.xxxxx 0 … 25
G1 25 8670400.830x.xxxxx 0 … 25 8672400.840x.xxxxx 0 … 16 8674400.830x.xxxxx 0 … 25
G1 1/4 32 8670500.840x.xxxxx 0 … 25 8672500.840x.xxxxx 0 … 16 8674500.840x.xxxxx 0 … 25
G1 1/2 40 8670600.840x.xxxxx 0 … 25 8672600.840x.xxxxx 0 … 16 8674600.840x.xxxxx 0 … 25
G2 50 8670700.840x.xxxxx 0 … 25 8672700.840x.xxxxx 0 … 16 8674700.840x.xxxxx 0 … 25
Voltage codes and spare coils Options

Voltage and frequency solenoid • Seat seal CR for ammonia
Code Voltage Code Voltage Frequency Power consumption • Manual override
Frequency Inrush / Holding Inrush / Holding Inrush / Holding • Version for viscosity up to 80 cst
8301/8304 *1) 8401/8404 *1) 8402/8406 *1) • Operating pressure up to 40 bar
024 00 24 V d.c. – 22 W 40 W 29 W
• Normally open
024 49 24 V a.c. 40 … 60 Hz 25 VA 45 VA 33 VA
• Explosion approved coils
110 49 110 V a.c. 40 … 60 Hz 25 VA 45 VA 33 VA
120 49 120 V a.c. 40 … 60 Hz 25 VA 45 VA 33 VA
230 49 230 V a.c. 40 … 60 Hz 25 VA 45 VA 33 VA
*1) Note: A.c. with rectifier plug.


+34 986 288118

3 Series 86700, 86720, 86740
VALVES
Dimensions
86700 with solenoid 830x
57
29 66
1
60

8670000.830x.xxxxx G1/4 44 143 132 60 27,5 12
H1
2
H
8670100.830x.xxxxx G3/8 44 143 132 60 27,5 12

8670200.830x.xxxxx G1/2 44 145 132 67 31 14
8670300.830x.xxxxx G3/4 50 154 137 80 35,5 16
P A
R
8670400.830x.xxxxx G1 62 164 143,5 95 44 18

T øA
L1
L

57
29 66
1
326
60
H1
2 Model Port size A H H1 L L1 T

H
8670500.840x.xxxxx G1 1/4 92 212,5 183,5 132 60 20

8670600.840x.xxxxx G1 1/2 92 212,5 183,5 132 60 22
P A
R
8670700.840x.xxxxx G2 109 212,5 183,5 160 74 24

T øA
L1
L
76,5
1
39 93,5
81,5
2 Model Port size A H H1 L L1 T

H1
8672000.840x.xxxxx G1/4 44 143 132 60 27,5 12

H
8672100.840x.xxxxx G3/8 44 143 132 60 27,5 12

8672200.840x.xxxxx G1/2 44 145 132 67 31 14
8672300.840x.xxxxx G3/4 50 154 137 80 35,5 16
R
P A 8672400.840x.xxxxx G1 62 164 143,5 95 44 18

T øA
L1
L


+34 986 288118

Series 86700, 86720, 86740
3
VALVES
76,5
1
39 93,5
81,5
2
H1
H

8672500.840x.xxxxx G1 1/4 92 212 183 132 60 20
8672600.840x.xxxxx G1 1/2 92 212 183 132 60 22
R
P A
8672700.840x.xxxxx G2 109 226 192 160 74 24
T øA
L1
L

57
29 66
327
60
1
H1

H
8674000.830x.xxxxx G1/4 44 143 132 60 60 12

8674100.830x.xxxxx G3/8 44 143 132 60 60 12
8674200.830x.xxxxx G1/2 44 145 132 67 67 14
P A
8674300.830x.xxxxx G3/4 50 154 137 80 80 16
R
8674400.830x.xxxxx G1 62 164 143,5 95 95 18

T ØA
L1
L

76,5
39 93,5
2
81,5
H1
1
H

P A 8674500.840x.xxxxx G1 1/4 92 212,5 183,5 132 132 20
R
8674600.840x.xxxxx G1 1/2 92 212,5 183,5 132 132 22

8674700.840x.xxxxx G2 109 226,5 192 160 160 24
T
L1 ØA
L


+34 986 288118
2/2-WAY INDIRECLY OPERATED SOLENOID VALVES

3 Series 82400, 82470, 82730, 83030
VALVES

Technical Data
• DN 8 … 50, G1/4 … 2
• High flow rate
• Damped operation vertical on top
Flow direction:
• Functional compact design Determined Differential pressure:
• Solenoid interchangeable 0,1 bar required
• Fluids of Group 2 acc. Pressure
Equipment Directive 97/23/
EC (Series 83030)
82400 (82410) 82470 (82680) 82730 (82740) 83030

Medium Neutral gases and liquids Hot water, steam Slightly aggressive gases Neutral gases and liquids
and liquid fluids
Port size G1/4 … 2 (1/4 … 2 NPT) G1/4 … 1 (1/4 … 1 NPT) G1/4 … 2 (1/4 … 2 NPT) DN 15 … DN 50
Operating pressure 0,1 … 10/16 bar 0,1 … 10 bar 0,1 … 10/16 bar 0,1 … 10/16 bar
Temperature
Media temperature -10°C … +90°C 0°C … +150°C -10°C … +90°C -10°C … +90°C
Ambient temperature -10°C … +50°C -10°C … +60°C -10°C … +50°C -10°C … +50°C
328
Material
Body Brass (CW617N) Brass (CW617N) Stainless steel (1.4408) Cast steel, brass
Seat seal NBR HNBR NBR NBR
Internal parts Stainless steel, PVDF, Stainless steel, brass Stainless steel, PVDF Stainless steel, PVDF resp.
brass from DN 25 Brass from DN 32
Standard models
Port Orifice Series 82400 Operating Series 82470 Operating Series 82730 Operating Series 83030 Operating
size (mm) Model pressure (bar) Model pressure (bar) Model pressure (bar) Model (Flange) pressure (bar)
G1/4 8 8240000.9101.xxxxx 0,1 … 16 8247000.9101.xxxxx 0,1 … 10 8273000.9101.xxxxx 0,1 … 16 – –
– 15 – – – – – – 8303200.9101.xxxxx 0,1 … 16
G3/4 20 8240300.9101.xxxxx 0,1 … 16 8247300.9101.xxxxx 0,1 … 10 8273300.9101.xxxxx 0,1 … 16 8303300.9101.xxxxx 0,1 … 16
G1 25 8240400.9101.xxxxx 0,1 … 16 8247400.9101.xxxxx 0,1 … 10 8273400.9101.xxxxx 0,1 … 16 8303400.9101.xxxxx 0,1 … 16
G1 1/4 32 8240500.9101.xxxxx 0,1 … 10 *1) – – 8273500.9101.xxxxx 0,1 … 10 *1) 8303500.9101.xxxxx 0,1 … 10 *1)
G1 1/2 40 8240600.9101.xxxxx 0,1 … 10 *1) – – 8273600.9101.xxxxx 0,1 … 10 *1) 8303600.9101.xxxxx 0,1 … 10 *1)
G2 50 8240700.9101.xxxxx 0,1 … 10 *1) – – 8273700.9101.xxxxx 0,1 … 10 *1) 8303700.9101.xxxxx 0,1 … 10 *1)
*1) Note: Operating pressure 0,1 … 16 bar with solenoid 9151.

Voltage and frequency solenoid • Normally open (NO) • Flanges acc.to ASME
• Manual override B 16.5 150 lb/sq.In.
Code Code Voltage Frequency Power consumption
Voltage Frequency
(Series 83030)
Inrush Holding Inrush Holding • Seat seal FPM
• FM/NEMA approved
9101 *2) 9151*2) • Seat seal EPDM coil Modele 382x for
024 00 24 V d.c. – 8W 8W 18 W 18 W • Bi-stabil version USA + Canada
024 50 24 V a.c. 50 Hz 15 VA 12 VA 45 VA 35 VA • Latching-coil system • With sealed core tube
110 50 110 V a.c. 50 Hz 15 VA 12 VA 45 VA 35 VA • Version for drinking • With Drain plug
120 60 120 V a.c. 60 Hz 15 VA 12 VA 45 VA 35 VA water with diaphragm (Gardening version)
according to KTW • ATEX approved coils
230 50 230 V a.c. 50 Hz 15 VA 12 VA 45 VA 35 VA


+34 986 288118
2/2-WAY INDIRECLY OPERATED SOLENOID VALVES

Series 82400, 82470, 82730, 83030
3
VALVES
Dimensions 1 Solenoid rotatable 360°
82400
48,3 42
26,5 30
36
20
Model Port size A B H H1 L L1 T
8240000.9101.xxxxx G1/4 44 19,5 78,5 67 60 27,5 12
8240100.9101.xxxxx G3/8 44 19,5 78,5 67 60 27,5 12
50
8240200.9101.xxxxx G1/2 44 19,5 81 67 67 31 14

33
1 8240300.9101.xxxxx G3/4 50 24 88 71,5 80 36,5 16

H1
8240400.9101.xxxxx G1 62 29,5 97,5 77 95 44 18

H
8240500.9101.xxxxx G1 1/4 92 44,5 124,5 95,5 132 60 20

P A
8240600.9101.xxxxx G1 1/2 92 44,5 124,5 95,5 132 60 22
R
8240700.9101.xxxxx G2 109 54,5 142,5 108 160 74 24

T øA
L1 B
L
82470
30
36
20

33
1 8247000.9101.xxxxx G1/4 44 19,5 78,5 67 60 27,5 12

H1
329
8247100.9101.xxxxx G3/8 44 19,5 78,5 67 60 27,5 12
H
8247200.9101.xxxxx G1/2 44 19,5 81 67 67 31 14

P A
8247300.9101.xxxxx G3/4 50 24 88 71,5 80 36,5 16
R
8247400.9101.xxxxx G1 62 29,5 97,5 77 95 44 18

T øA
L1 B
L
82730
48,3 42
26,5 30
36

20
8273000.9101.xxxxx G1/4 44 19,5 78,5 67 60 27,5 12

8273100.9101.xxxxx G3/8 44 19,5 78,5 67 60 27,5 12
50
8273200.9101.xxxxx G1/2 44 19,5 81 67 67 31 14

33
1
8273300.9101.xxxxx G3/4 50 24 88 71,5 80 36,5 16
H1
8273400.9101.xxxxx G1 62 29,5 97,5 77 95 44 18

H
8273500.9101.xxxxx G1 1/4 92 44,5 124,5 95,5 132 60 20

P A
8273600.9101.xxxxx G1 1/2 92 44,5 124,5 95,5 132 60 22
R
8273700.9101.xxxxx G2 109 54,5 142,5 108 160 74 24

T øA
L1 B
L
83030 42
48,3
36 30 Model Orifice øB øF F H L
8303000.9101.xxxxx 15 44 96 77 69 130
1 8303100.9101.xxxxx 20 50 110 86,6 77 150
øB
2
8303200.9101.xxxxx 25 62 120 95,1 81 160
H
8303300.9101.xxxxx 32 92 140 110,7 97 180

P A
8303400.9101.xxxxx 32 92 140 110,7 114 180
DN
8303500.9101.xxxxx 40 92 150 117,8 102 200

8303600.9101.xxxxx 40 92 150 117,8 119 200
8303700.9101.xxxxx 50 109 165 128,4 113 230
L
8303700.9151.xxxxx 50 109 165 128,4 131 230
¨F
øF
Contact face acc. to DIN EN 1092-1/B.

+34 986 288118
2/2-WAY INDIRECTLY OPERATED VALVES

3 Series 85360, 85380, 85660
VALVES

Technical Data
• DN 8 … 50, G1/4 … 2, Flange
connection, Pressure rating PN 40 Switching function: Mounting position:
• Compact build piston valve
Flow direction: vertical on top
Determined Differential pressure:
• High flow rate 0,5/1 bar required
• Piston guided in PTFE rings
• Solenoid interchangeable
• Series 85360:
- Damped operation via cone
• Series 85380:
-Leakrate E acc. to DIN EN 12266-1
85360 (85370) 85380 (85390) 85660

Medium Neutral gases and liquids Neutral steam and liquids Neutral gases and liquid fluids
Port size G1/4 … 2 (1/4 … 2 NPT) G1/4 … 1 (1/4 … 1 NPT) DN 15 … 50

Operating pressure 0,5 … 40 bar 1 … 25 bar 0,5 … 40 bar
Temperature
Media temperature -20°C … +90°C 0°C … +200°C -20°C … +90°C
330
Ambient temperature -20°C … +50°C 0°C … +50°C with solenoid mounted -20°C … +50°C
vertical underneath max. +60 °C *4)
Material
Body Brass (CW617N) Brass (CW617N) Cast steel (1.0619), brass (CW617N)
Seat seal NBR PTFE NBR
Internal parts Stainless steel, brass, PTFE/carbon Stainless steel, FPM, PTFE Stainless steel, brass, PTFE
Standard models
Port size Orifice Series 85360 Operating pressure Series 85380 Operating pressure Series 85660 Operating pressure
(mm) Model (bar) Model (bar) Model (Flange) (bar)
G1/4 8 8536000.915x.xxxxx 0,5 … 40 8538000.915x.xxxxx 1 … 25 – –
G3/8 10 8536100.915x.xxxxx 0,5 … 40 8538100.915x.xxxxx 1 … 25 – –
G1/2 12 8536200.915x.xxxxx 0,5 … 40 8538200.915x.xxxxx 1 … 25 – –
– 15 – – – – 8566200.915x.xxxxx 0,5 … 40
G3/4 20 8536300.915x.xxxxx 0,5 … 40 8538300.915x.xxxxx 1 … 25 8566300.915x.xxxxx 0,5 … 40
G1 25 8536400.915x.xxxxx 0,5 … 40 8538400.915x.xxxxx 1 … 25 8566400.915x.xxxxx 0,5 … 40
G1 1/4 32 8536500.915x.xxxxx 0,5 … 40 – – 8566500.915x.xxxxx 0,5 … 40
G1 1/2 40 8536600.915x.xxxxx 0,5 … 40 – – 8566600.915x.xxxxx 0,5 … 40
G2 50 8536700.915x.xxxxx 0,5 … 40 – – 8566700.915x.xxxxx 0,5 … 40

Voltage and frequency solenoid • Normally open
Code Code Voltage Frequency Power consumption • Manual override
Voltage Frequency Inrush Holding Inrush Holding • Version for drinking water
9151 *1) 9152 *2)
• Special version for PET-bottling systems
024 00 24 V d.c. – 18 W 18 W 10 W 10 W
024 50 24 V a.c. 50 Hz 45 VA 35 VA 45 VA 15 VA
110 50 110 V a.c. 50 Hz 45 VA 35 VA 45 VA 15 VA
120 60 120 V a.c. 60 Hz 45 VA 35 VA 45 VA 15 VA
230 50 230 V a.c. 50 Hz 45 VA 35 VA 45 VA 15 VA
*1) Note: r coil only.


+34 986 288118
2/2-WAY INDIRECTLY OPERATED VALVES

Series 85360, 85380, 85660
3
VALVES
Dimensions
85360
48,3 x 42
2
1 Model Port size øB H H1 L T
8536000.9151.xxxxx G1/4 44 105 93,5 60 12
H1
8536100.9151.xxxxx G3/8 44 105 93,5 60 12

H
8536200.9151.xxxxx G1/2 44 107,5 102,5 67 14

8536300.9151.xxxxx G3/4 50 119 102,5 80 16
8536400.9151.xxxxx G1 62 131,5 110,5 95 18
P A 8536500.9151.xxxxx G1 1/4 92 166 137 132 20
R
8536600.9151.xxxxx G1 1/2 92 166 137 132 22

8536700.9151.xxxxx G2 109 186 151,5 160 24
T øB
L
85380
331
48,3 x 42
2
1
H1
H
Model Port size øB H H1 L T

8538000.9152.xxxxx G1/4 44 105 93,5 60 12
8538100.9152.xxxxx G3/8 44 105 93,5 60 12
P A 8538200.9152.xxxxx G1/2 44 107,5 102,5 67 14
R
8538300.9152.xxxxx G3/4 50 119 102,5 80 16

8538400.9152.xxxxx G1 62 131,5 110,5 95 18
T øB
L
85660
42
48,3
1 Model Orifice øB ø F max. H H1

2
øB 8566200.9101.xxxxx 15 44 96 96 130
H
8566300.9101.xxxxx 20 50 110 108,5 150

8566400.9101.xxxxx 25 62 115 115 160
P A
DN
8566500.9101.xxxxx 32 92 140 138,5 180

8566600.9101.xxxxx 40 92 150 143,5 200
L
8566700.9101.xxxxx 50 109 165 156,5 230
ø F max.


+34 986 288118
2/2-WAY PRESSURE ACTUATED VALVES BY EXTERNAL FLUID

3 Series 84500, 84520
VALVES

Technical Data
• DN 15 … 50, G1/2 … 2
• Easy rebuilding into »normally open«
or »double-acting« without tools vertical on top
Flow direction:
• Optical position indicator is standard Determined
• Damped closing (Valve closes
against flow direction)
• Suitable for contaminated flow fluid
• Suitable for vacuum up to max. 90%
• Reversed flow direction optional
84500 (84510) 84520 (84530)

Medium Neutral gases and liquids Aggressive gases and liquids
Pilot fluid Neutral gases max. +60°C Neutral gases max. +60°C
Port size G1/2 … 2 (1/2 … 2 NPT) G1/2 … 2 (1/2 … 2 NPT)
Operating pressure 0 … 25 bar (depends on port size) 0 … 25 bar (depends on port size)
Pilot pressure 3,5 … 10 bar 3,5 … 10 bar
Temperature
332

Material
Process fluid
Seat seal PTFE PTFE
Internal parts Brass, stainless steel Stainless steel
Material
Pilot fluid
Body Polyamid 66 with glass fibre 30% Polyamid 66 with glass fibre 30%
Seals NBR NBR
Internal parts Brass, stainless steel Brass, stainless steel, 1.8159, 1.1200
Standard models
Port size Series 84500 Operating pressure Series 84520 Operating pressure
Model (bar) Model (bar)
G1/2 8450200.0000.00000 0 … 16 (25) 8452200.0000.00000 0 … 16 (25)
G3/4 8450300.0000.00000 0 … 10 (16) 8452300.0000.00000 0 … 10 (16)
G1 8450400.0000.00000 0 … 10 8452400.0000.00000 0 … 10
G1 1/4 8450500.0000.00000 0…7 8452500.0000.00000 0…7
G1 1/2 8450600.0000.00000 0 … 4,5 8452600.0000.00000 0 … 4,5
G2 8450700.0000.00000 0…3 8452700.0000.00000 0…3
Options
• Namur interface plate for
namur pilot valve
• Electrical position indicator
• Linear cone positioner with
integrated sensor

+34 986 288118

Series 84500, 84520
3
VALVES
Dimensions
84500
B
H
H
1
Z2
Z1
1
G1/4
Model Port size B H H1 L

8450200.0000.00000 G1/2 89,5 177,5 164 65 27
A 8450300.0000.00000 G3/4 89,5 184 168 75 32
8450400.0000.00000 G1 89,5 194,5 174 90 41
8450500.0000.00000 G1 1/4 89,5 209,5 184,5 110 50
8450600.0000.00000 G1 1/2 89,5 208,5 186 120 55
L
P
8450700.0000.00000 G2 89,5 229,5 194,5 150 70
333
84520
B
H
H
1
Z2
Z1
1
G1/4

8452200.0000.00000 G1/2 89,5 177,5 164 65 27
8452300.0000.00000 G3/4 89,5 184 168 75 32
A
8452400.0000.00000 G1 89,5 194,5 174 90 41
8452500.0000.00000 G1 1/4 89,5 209,5 184,5 110 50
8452600.0000.00000 G1 1/2 89,5 208,5 186 120 55
L
P 8452700.0000.00000 G2 89,5 229,5 194,5 150 70
1 Actuator may be rotated 360°

+34 986 288118

3 Series 84720, 84740
VALVES

Technical Data
• DN 15 … 25, G1/2 … 1
• Optical position indicator is standard
Normally closed Optional
• Damped closing (Valve closes
Flow direction:
against flow direction) Determined
• Suitable for contaminated flow fluid
• High flow rate
• Option pressure actuated
by external liquid fluid
84720 (84730) 84740 (84750)

Medium Neutral gases and liquids Aggressive gases and liquids
Temperature
334

Material
Process fluid
Body Brass (CW617N) Stainless steel
Seat seal PTFE PTFE
Online at store.norgren.com
Internal parts Brass, stainless steel Stainless steel

Material
Pilot fluid
Body Polyamid 66 with glass fibre 30% Polyamid 66 with glass fibre 30%
Seals NBR NBR
Internal parts Brass, stainless steel Brass, stainless steel
Standard models
Port size Series 84720 Operating pressure Series 84740 Operating pressure
Model (bar) Model (bar)
G1/2 8472200.0000.00000 0 … 16 8474200.0000.00000 0 … 16
G3/4 8472300.0000.00000 0…8 8474300.0000.00000 0…8
G1 8472400.0000.00000 0…5 8474400.0000.00000 0…5
Options
• Namur interface plate for
Namur pilot valve
• Normally open
• Double acting

+34 986 288118

Series 84720, 84740
3
VALVES
Dimensions
84720
B
H
H
1
Z2
Z1
1
G1/4

8472200.0000.00000 G1/2 66 154 140,5 65 27
L
8472300.0000.00000 G3/4 66 160 144,5 75 32
P
8472400.0000.00000 G1 66 171 150,5 90 41
84740
335
B
H
H
1
Z2
Z1
1
G1/4
A Model Port size B H H1 L

8474200.0000.00000 G1/2 66 154 140,5 65 27
8474300.0000.00000 G3/4 66 160 144,5 75 32
L
P 8474400.0000.00000 G1 66 171 150,5 90 41

+34 986 288118

3 Series 82180, 82280, 82580
VALVES
• 2/2-way seat valves • Series 82580:

Technical Data
• DN 15 … 50 - EC Modele examination certificate
• For robust industry applications Product ID-No.: CE-0085 AT0091 Switching function: Mounting position:
Valve class A Valve group 2 Normally closed Optional, preferably solenoid
• Series 82180, 82280: vertical on top
- High function reliability Flow direction:
- High flow rate
- Short response time < 1 s
Determined
- Suitable for contaminated
process fluid - Qualification approval acc.
- Damped operation (Valves to EN 161/3394 Part 1
closes against flow direction)
up to max. 90%
- Option pressure actuated
by external liquid fluid
82180 (82190) 82280 (82290) 82580 with DVGW-approval

Medium Neutral gases and liquids Neutral gases and liquids Neutral burnable gases and other neutral gases
Pilot fluid Neutral gases max. +80°C Neutral gases max. +80°C Neutral gases max. +80°C
336
Port size G1/2 … 2 (1/2 … 2 NPT) G1/2 … 2 (1/2 … 2 NPT) G1/2 … 2 (1/2 … 2 NPT)
Operating pressure 0 … 16 bar (depends on port size) 0 … 10/16 bar 0 … 10 bar
Pilot pressure 3,8 … 8 bar 3,8 … 8 bar 5 … 8 bar
Temperature
Media temperature -10°C … +180°C -10°C … +180°C -10°C … +60°C
Ambient temperature -10°C … +60°C -10°C … +60°C -10°C … +60°C
Material
Process fluid
Body Brass (CW617N) Brass (CW617N) Brass (CW617N)
Seat seal PTFE PTFE FPM
Internal parts Brass, stainless steel Brass, stainless steel Brass, stainless steel
Material
Pilot fluid
Body Stainless steel, aluminium Stainless steel, aluminium Stainless steel (1.4408)
Seals NBR NBR NBR
Internal parts Coated steel Coated steel Coated steel
Standard models
Port size Orifice Series 82180 Operating pressure Series 82280 Operating pressure Series 82580 Operating pressure
(mm) Model (bar) Model (bar) Model (bar)
G1/2 15 8218200.0000.00000 0 … 16 – – 8258200.0000.xxxxx 0 … 10
G3/4 20 8218300.0000.00000 0 … 10 – – 8258300.0000.xxxxx 0 … 10
G1 25 8218400.0000.00000 0 … 10 – – 8258400.0000.xxxxx 0 … 10
G1 1/4 32 8218500.0000.00000 0…7 8228500.0000.00000 0 … 16 8258500.0000.xxxxx 0 … 10
G1 1/2 40 8218600.0000.00000 0 … 4,5 8228600.0000.00000 0 … 10 8258600.0000.xxxxx 0 … 10
G2 50 8218700.0000.00000 0…3 8228700.0000.00000 0 … 10 8258700.0000.xxxxx 0 … 10
Options
• Normally open
• Operating pressure up to 25 bar

+34 986 288118

Series 82180, 82280, 82580
3
VALVES
Dimensions
82180 actuator ø 70 mm
H
H
1

G1/4
8218200.0000.00000 G1/2 89,5 154 140,5 65 27

A 8218300.0000.00000 G3/4 89,5 160 144 75 32
8218400.0000.00000 G1 89,5 171 150,5 90 41
8218500.0000.00000 G1 1/4 89,5 186 161 110 50
L
P 8218600.0000.00000 G1 1/2 89,5 190 162,5 120 55
8218700.0000.00000 G2 89,5 206 171 150 70
82280 actuator ø 125 mm

B
337
141
Z
G1/4
A
R

T
8228500.0000.00000 G1 1/4 163 250 225 110 50

8228600.0000.00000 G1 1/2 163 255 227,5 120 55
L
P
8228700.0000.00000 G2 163 270 235 150 70
82580
H
H
1
1
G1/4
Z
8258200.0000.00000 G1/2 89,5 154 140,5 65
8258300.0000.00000 G3/4 89,5 160 144 75
8258400.0000.00000 G1 89,5 171 150,5 90
P
8258500.0000.00000 G1 1/4 89,5 186 161 110

8258600.0000.00000 G1 1/2 89,5 190 162,5 120
A
8258700.0000.00000 G2 89,5 206 171 150
L

+34 986 288118

3 Series 83240, 83250
VALVES

Technical Data
• DN 15 … 100, G1/2 … 2
Switching function: Flow direction:
• Suitable for steam
Normally closed from P to A, Determined
• Can be used as Y-pattern/selector closed by spring force, opened Mounting position:
valve (pressure connected to A) from P to A by pilot pressure Optional
• High flow rate
• Series 83240:
- Damped closing
- For robust industry applications
83240 83250
Medium Neutral gases and liquids Neutral gases and liquids
Pilot fluid Air max. +80°C Neutral gases max. +60°C
Port size DN 15 … 100 DN 15 … 50, G1/2 … 2 (1/2 … 2 NPT)
Temperature
338

Material
Process fluid
Body Grey cast iron Gun metal
Seat seal PTFE PTFE
Internal parts Brass, stainless steel Stainless steel, brass
Material
Pilot fluid
Body – Aluminium
Seal – NBR
Internal parts – Brass, stainless steel
Standard models
(mm) Model (Flange) (bar) Model (bar)
G1/2 15 8324200.0000.00000 0 … 16 8325200.0000.00000 0 … 16
G3/4 20 8324300.0000.00000 0 … 16 8325300.0000.00000 0 … 16
G1 25 8324400.0000.00000 0 … 10 8325400.0000.00000 0 … 10
G1 1/4 32 8324500.0000.00000 0 … 16 8325500.0000.00000 0 … 16
G1 1/2 40 8324600.0000.00000 0 … 14 8325600.0000.00000 0 … 14
G2 50 8324700.0000.00000 0 … 10 8325700.0000.00000 0 … 10
– 65 8324800.0000.00000 0…7 – –
– 80 8324900.0000.00000 0…4 – –
– 100 8325000.0000.00000 0…2 – –
Options
• Normally open (NO) P A
• Water as a pilot fluid

+34 986 288118

Series 83240, 83250
3
VALVES
Dimensions
83240
øB
Z
H
G1/4
Model Orifice øB øF H H1 H2 L M
H1
83242xx.0000.00000 15 96 95 193 95 97 130 M16 x 1

83243xx.0000.00000 20 96 105 198 100 112 150 M16 x 1
A R
83244xx.0000.00000 25 96 115 199 101 118 160 M16 x 1
DN
øF
83245xx.0000.00000 32 164 140 285 141 142 180 M22 x 1,5

83246xx.0000.00000 40 164 150 293 149 148 200 M22 x 1,5
H2
83247xx.0000.00000 50 164 165 300 156 158 230 M22 x 1,5

83248xx.0000.00000 65 164 185 314 170 183 290 M22 x 1,5
83249xx.0000.00000 80 164 200 326 182 204 310 M22 x 1,5
P
83250xx.0000.00000 100 164 220 339 195 236 350 M22 x 1,5
L
339
83250
ØB
M
G1/4
H
Z
1
Model Port size ø B H H1 H2 L M 1 2

8325200.0000.00000 G1/2 96 186 88 41 75 M16 x 1 36 27
H1
8325300.0000.00000 G3/4 96 190 92 46 87 M16 x 1 36 32

8325400.0000.00000 G1 96 190 92 47 107 M16 x 1 41 41
A R
8325500.0000.00000 G1 1/4 164 269 125 66 123 M22 x 1,5 55 50
R
8325600.0000.00000 G1 1/2 164 269 125 68 147 M22 x 1,5 55 58

H2
P 2
8325700.0000.00000 G2 164 273 129 74 171 M22 x 1,5 55 70
L

+34 986 288118

3 Series 83350, 83380
VALVES

Technical Data
• DN 15 … 100, G1/2 … 2
• Any flow direction and
Normally closed; closed by spring Optional
mounting position force, opened by pilot pressure
• Special seal materials are required Flow direction:
for use with oil and oleiferous media Optional
83350 83380
Pilot fluid Air max. +40°C Air max. +40°C
Port size G1/2 … 2 DN 15 … 150
Operating pressure 0 … 10 bar 0 … 6/8/10 bar
Temperature
340

Material
Process fluid
Body Grey cast iron Grey cast iron
Seat seal EPDM EPDM
Material
Pilot fluid
Body Polymer material Polymer material
Seal NBR NBR
Internal parts Coated steel Coated steel
Standard models
(mm) Model (bar) Model (Flange) (bar)
G1/2 15 8335200.0000.00000 0 … 10 8338200.0000.00000 0 … 10
G3/4 20 8335300.0000.00000 0 … 10 8338300.0000.00000 0 … 10
G1 25 8335400.0000.00000 0 … 10 8338400.0000.00000 0 … 10
G1 1/4 32 8335500.0000.00000 0 … 10 8338500.0000.00000 0 … 10
G1 1/2 40 8335600.0000.00000 0 … 10 8338600.0000.00000 0 … 10
G2 50 8335700.0000.00000 0 … 10 8338700.0000.00000 0 … 10
– 65 – – 8338800.0000.00000 0…6
– 80 – – 8338900.0000.00000 0…8
– 100 – – 8339000.0000.00000 0…6
– 125 – – 8339100.0000.00000 0…8
– 150 – – 8339200.0000.00000 0…6
Options
• Normally open
• Seat seal FPM
• Seat seal PTFE
• Valve body material stainless steel

+34 986 288118

Series 83350, 83380
3
VALVES
Dimensions
83350
B

H1
H
G1/4
8335200.0000.00000 G1/2 125 164 148 5
8335300.0000.00000 G3/4 125 168,5 148 85
8335400.0000.00000 G1 125 171 148 110
8335500.0000.00000 G1 1/4 155 230,5 203 120
8335600.0000.00000 G1 1/2 155 235,5 203 140
L 8335700.0000.00000 G2 210 285,5 248 165
83380
B
Model Orifice B *1) øF H L
341
8338200.0000.00000 15 130 95 148 130
8338300.0000.00000 20 150 105 148 150
8338400.0000.00000 25 160 115 148 160
H
8338500.0000.00000 32 180 140 203 180

G1/4
8338600.0000.00000 40 200 150 203 200
8338700.0000.00000 50 230 165 248 230
8338800.0000.00000 65 290 185 329 290
8338900.0000.00000 80 310 200 339 310
øF
DN
8339000.0000.00000 100 350 220 354 350

8339100.0000.00000 125 400 250 519 400
L 8339200.0000.00000 150 480 285 514 480
*1) B = max. depth.

+34 986 288118

3 Series 82210
VALVES
• 2/2-way piston seat valves

Technical Data
• DN 15 … 100
• High flow rate
• Damped closing vertical on top
Flow direction:
• Suitable for contaminated Determined
process fluids
82210
Medium For neutral gaseous and liquid fluids
Port size DN 15 … 100
Operating pressure 0 … 16 bar (depends on port size)
Temperature
Media temperature -10°C … +180°C
Ambient temperature -10°C … +60°C
Material
342
Body Spheroidal cast iron (EN-GJS-400-18-LT)

Seat seal PTFE
Internal parts 1.4571, 1.4568, 1.4305, brass
Standard models
Orifice Series 82210 Operating pressure Pilot pressure
(mm) Model (bar) (bar)
15 8221200.0000.00000 0 … 16 5,5 … 10 bar
20 8221300.0000.00000 0 … 16 5,5 … 10 bar
25 8221400.0000.00000 0 … 10 5,5 … 10 bar
32 8221500.0000.00000 0 … 16 4 … 8 bar
40 8221600.0000.00000 0 … 12 4 … 8 bar
50 8221700.0000.00000 0 … 10 5,5 … 8 bar
65 8221800.0000.00000 0…7 5,5 … 8 bar
80 8221900.0000.00000 0…5 5,5 … 8 bar
100 8222000.0000.00000 0 … 2,5 5,5 … 8 bar
Options
• Normally open
• Stainless steel body
• Higher operating pressure

+34 986 288118

Series 82210
3
VALVES
Dimensions
82210
øB
G1/4
Z
G1/4
H
Model Orifice øB øF H L
DN
P A 82212xx.0000.00000 15 96 95 201 130

øF
82213xx.0000.00000 20 96 105 208 150

82214xx.0000.00000 25 96 115 219 160
L
82210
øB
343
Z
G1/4
H
Model Orifice øB øF H L
82215xx.0000.00000 32 164 140 299 180
82216xx.0000.00000 40 164 150 310 200
P A 82217xx.0000.00000 50 164 165 318 230

DN
øF
82218xx.0000.00000 65 164 185 346 290

82219xx.0000.00000 80 164 200 361 310
82220xx.0000.00000 100 164 220 382 350
L

+34 986 288118

3 Series 84660, 84680
VALVES

Technical Data
• G1/4, DN 1,6 and 3
• Compact design
• Complete with connector and gasket vertical on top
Flow direction:
• Solenoid interchangeable Determined
• Noiseless exhaust
• Low power consumption
84660 (84670) 84680 (84690)

Medium Filtered, lubricated resp. non-lubricated air or neutral liquid fluids Filtered, lubricated resp. non-lubricated air or neutral liquid fluids
Port size DN 1,6 DN 3

Temperature
Material
344
Body Aluminium Aluminium

Seat seal TPU TPU
Internal parts Stainless steel, PPS Stainless steel, PPS
Standard models
Orifice Port size Series 84660 Operating pressure Flow *2) Series 84680 Operating pressure Flow *2)
(mm) Internal External Model (bar) (l/min) Model (bar) (l/min)
R A
1,6 G1/4 *1) G1/4 8466000.910x.xxxxx 1 … 10 1,2 – – –
3 G1/4 *1) G1/4 – – – 8468000.915x.xxxxx 1 … 10 3,3
*1) Note: Noiseless exhaust.

Voltage and frequency solenoid 9101/9151 *2)
Code Voltage Code Voltage Frequency Power consumption
Frequency Inrush Holding Inrush Holding
9101 *2) 9151 *2)
024 00 24 V d.c. – 8W 8W 18 W 18 W
024 50 24 V a.c. 50 Hz 15 VA 12 VA 45 VA 35 VA
110 50 110 V a.c. 50 Hz 15 VA 12 VA 45 VA 35 VA
120 60 120 V a.c. 60 Hz 15 VA 12 VA 45 VA 35 VA
230 50 230 V a.c. 50 Hz 15 VA 12 VA 45 VA 35 VA

Options
• Manual override
• Connection Port P and A female G1/8
• Explosion proofed coils

+34 986 288118

Series 84660, 84680
3
VALVES
Dimensions
84660
2 1
H1
R
H
øB
P A Model Orifice øB H H1
G1/4
G1/4
8466000.9101.xxxxx 1,6 31 73,6 61,5

9
(19)
60
84680
345
2 1
H1
R
H
øB
P A Model Orifice øB H H1
G1/4
G1/4
8468000.9151.xxxxx 3 130 148 130

9
(19)
60


+34 986 288118

3 Series 82160, 82710
VALVES
• 2/2-way seat valves • Series 82710:

Technical Data
• DN 8 … 50, G1/4 … 2 - Spindle seal with diaphragm
- Suitable for contaminated Switching function:
• Series 82160:
process fluids Normally closed with pilot pressure
- Damped closing
- Optical position indicator Flow direction:
- For fluids with high Determined
is standard
particle contamination
Mounting position:
- Fluid isolated from valve actuator Optional
- Optimised dimensions and weight
- Vacuum version as an option
- Compact valve for
industrial applications
82160 (82260) 82710 (82750)

Medium Neutral fluids with high particle contamination Neutral gases and liquids
Pilot fluid Air max. +60°C Air, water, hydraulic oil max. +90°C
Port size G1/4 … 2 G1/4 … 1/2
Pilot connection G1/4 G1/8
Operating pressure 0,2 … 16 bar -0,9 … 6 bar
Pilot pressure G1/4 … 1/2 max. 6 bar higher than operating pressure 3 … 8 bar
346
G3/4 … 2 max. 1 bar higher than operating pressure

Temperature
Material
Process fluid
Body Brass (CW617N) Brass (CW617N)
Seat seal NBR Fabric reinforced NBR diaphragm
Internal parts Brass, stainless steel –
Material
Pilot fluid
Body – Brass, PPO (cover)
Seat seal – Fabric reinforced NBR diaphragm
Standard models
G1/4 8 8216000.0000.00000 0,2 … 16 8271000.0000.00000 -0,9 … 6
G3/8 10 8216100.0000.00000 0,2 … 16 8271100.0000.00000 -0,9 … 6
G1/2 12 8216200.0000.00000 0,2 … 16 8271200.0000.00000 -0,9 … 6
G3/4 20 8216300.0000.00000 0,2 … 16 – –
G1 25 8216400.0000.00000 0,2 … 16 – –
G1 1/4 32 8216500.0000.00000 0,2 … 16 – –
G1 1/2 40 8216600.0000.00000 0,2 … 16 – –
G2 50 8216700.0000.00000 0,2 … 16 – –
Options
• Fabric diaphragm FPM • Seat seal FPM (Series 82710)
(Series 82160) • Seat seal EPDM (Series 82710)
• Fabric diaphragm NBR • Seat seal FPM, Body stainless
(Series 82160) steel 1.4581 (Series 82710)
• Suitable for vacuum (Series 82160)

+34 986 288118

Series 82160, 82710
3
VALVES
Dimensions
82160
Model Port size B *1) H H1 L
G1/4
8216000.0000.00000 G1/4 44 48 33 67
Z
8216100.0000.00000 G3/8 44 48 33 67
8216200.0000.00000 G1/2 44 48 33 67
H1
8216300.0000.00000 G3/4 70 81 57 95
8216400.0000.00000 G1 70 81 57 95
H
A P
8216500.0000.00000 G1 1/4 96 103 70 132
R
8216600.0000.00000 G1 1/2 96 103 70 132

L B
8216700.0000.00000 G2 112 121 81 160
*1) B = max. depth.
82710
B
G1/8
Z
H1
347
H

8271000.0000.00000 G1/4 96 186 88 75
P A
R
8271100.0000.00000 G3/8 96 190 92 87

8271200.0000.00000 G1/2 96 190 92 107
L

+34 986 288118

3 Series 82380, 82480
VALVES

Technical Data
• DN 15 … 50,
G1/2 … 2 (1/2 … 2 NPT) Switching function: Mounting position:
• Suitable for contaminated
process fluids Flow direction:
Determined
• High flow rate
• High media compatibility due to
optimal material combinations
• For robust industry applications
• Damped closing (valve closes
against flow direction)
82380 (82390) 82480 (82490)

Medium Aggressive gases and liquids Aggressive gases and liquids
Temperature
348

Material
Process fluid
Body Stainless steel (1.4408) Stainless steel (1.4408)
Seat seal PTFE PTFE
Internal parts Stainless steel Stainless steel
Material
Pilot fluid
Body Stainless steel, aluminium Stainless steel, aluminium
Seals: NBR NBR
Internal parts Coated steel Coated steel
Standard models
G1/2 15 8238200.0000.00000 0 … 16 – –
G3/4 20 8238300.0000.00000 0 … 10 – –
G1 25 8238400.0000.00000 0 … 10 – –
G1 1/4 32 8238500.0000.00000 0…7 8248500.0000.00000 0 … 16
G1 1/2 40 8238600.0000.00000 0 … 4,5 8248600.0000.00000 0 … 10
G2 50 8238700.0000.00000 0…3 8248700.0000.00000 0 … 10
Options
• Normally open (NO)
• Seat seal FPM
• Optical position indicator
• Media temperature max. +200°C
• Stainless steel actuator
• Spindle seal 80 with
stainless steel bellows

+34 986 288118

Series 82380, 82480
3
VALVES
Dimensions
82380 actuator ø 70 mm (A)

10
3,
5
H
85
Model Port size B C H L T

1
Z 8238200.0000.00000 G1/2 89,5 159 154 65 15 27
A
8238300.0000.00000 G3/4 89,5 165 160 75 16,5 32

G1/4
8238400.0000.00000 G1 89,5 175 171 90 19 41

A
8238500.0000.00000 G1 1/4 89,5 189 186 110 21,5 50
C
8238600.0000.00000 G1 1/2 89,5 193 190 120 21,5 55

P
8238700.0000.00000 G2 89,5 211 206 150 26 70
45°
349
82480 actuator ø 125 mm (A)
B
141
Z
G1/4
A
R
Model Port size B C H L T

T
8248500.0000.00000 G1 1/4 163 253 250 110 21,5 50

8248600.0000.00000 G1 1/2 163 257 255 120 21,5 55
L
P 8248700.0000.00000 G2 163 275 270 150 26 70

+34 986 288118

3 Series 84180, 84190
VALVES
• 2/2-way piston seat valves

Technical Data
• DN 2 … 10
• Compact miniature actuator ø 30 mm
• Actuator may be rotated 360°
Flow direction:
• Suitable for contaminated Determined
process fluid
• High flow rate
• Valve operates without pressure
differential (Zero delta P)
• Clip angle M5 standard
84180 (84380) 84190 (84390)

Medium Neutral, aggressive gases and liquids up to 600 mm2/s Neutral, aggressive gases and liquids up to 600 mm2/s
Port size DN 2 … 10, G1/8 … 1/2 DN 2 … 10, G1/8 … 1/2
350
Pilot pressure 4 … 10 bar 4 … 10 bar

Temperature
Material
Process fluid
Seat seal NBR NBR
Internal parts PTFE Stainless steel
Material
Pilot fluid
Seals NBR NBR
Internal parts Stainless steel, brass Stainless steel, brass
Standard models
G1/8 2 8418800.0000.00000 0 … 25 8419800.0000.00000 0 … 25
G1/4 4 8418020.0000.00000 0 … 25 8419020.0000.00000 0 … 25
G3/8 6 8418140.0000.00000 0 … 20 8419140.0000.00000 0 … 20
G1/2 10 8418260.0000.00000 0…8 8419260.0000.00000 0…8
Options
• Normally open (NO)
• Seat seal FPM
• Seat seal EPDM
• Double acting
• Higher operating pressure

+34 986 288118

Series 84180, 84190
3
VALVES
Dimensions
84180
B
M5 B
H1
H

8418800.0000.00000 G1/8 44 65 53 44
P A 8418020.0000.00000 G1/4 44 65 53 44
R
8418140.0000.00000 G3/8 44 65 53 44
8418260.0000.00000 G1/2 60 81 67 60
L M5 R
*1) B = max. depth.
84190
B
M5 B
351
H1
H

8419800.0000.00000 G1/8 44 65 53 44
P A 8419020.0000.00000 G1/4 44 65 53 44
R
8419140.0000.00000 G3/8 44 65 53 44
8419260.0000.00000 G1/2 60 81 67 60
L M5 R
*1) B = max. depth.

+34 986 288118
n e ere d.
.E n g i
ion
Precis
Efficient and inexpensive

dust filter cleaning
Filter valves for air-blasting have been developed to allow efficient and inexpensive cleaning.
Top priorities in the developers’ requirements specification were to optimise the filter
cleaning, reduce air consumption and prolong the valves’ service life. To achieve optimum
cleaning with the compressed air pulse, the pressure in the filter has to reach the set point
very quickly. This means that the valves must open fully within a few milliseconds.
Compared with the previous models, the IMI Buschjost filter valve series has extremely fast opening times, which are essential for
effective, intensive cleaning. The closing mechanism is just as fast as the opening mechanism. This determines the economical
operation of a valve. The air pulse must return to zero as quickly as possible, as any minor delay will only consume air and cost money.
Product highlight: > Usable from –40 ... +140°C
> High grade materials > High corrosion resistance (optional)
> Solenoid exchangeable > Explosion proof up to hazardous area
without tools (TWIST-ON®) 1/21 and temperature class T4/ T5
> CE-mark > Usable for low pressure- and
> Optimized strength vacuum applications
> Designed with newest > Integrated silencer Engineering
CAD-technologies
> High flow rate
> Frost proof solenoid system
> International registrations like
GREAT Solutions
> One-piece diaphragm GOST-R or CRN available

+34 986 288118

Series 82080 3
VALVES
Technical Data
• DN 3 … 8, G1/4 … 3/8
• Suitable for aggressive fluids vertical on top
Flow direction:
• Compact solenoid with Determined
integrated core tube
• Core tube protected
with PTFE-bellow
• Unsusceptible to calcification and
magnetization of foreign particles
82080
Medium Aggressive gases and fluids
Port size G1/4 … 3/8
Operating pressure 0 … 7 bar (depends on port size)
Temperature
Material
353
Body PVDF
Seat seal EPDM
Internal parts PTFE-bellows
Standard models Voltage codes and spare coils

Port Orifice Series 82080 Operating pressure Voltage and frequency solenoid
size (mm) Model (bar) Code Code Voltage Frequency Power consumption
G1/4 3 8208000.805x.xxxxx 0…7 Voltage Frequency Inrush Holding Inrush Holding
G3/8 3 8208100.805x.xxxxx 0…7 8050 8051*1)
G1/4 4,5 8208060.805x.xxxxx 0…5 024 00 24 V d.c. – 12 W 12 W – –
G3/8 4,5 8208160.805x.xxxxx 0…5 110 49 110 V a.c. 40 … 60 Hz – – 13 VA 13 VA
G1/4 6 8208070.805x.xxxxx 0…2 120 49 120 V a.c. 40 … 60 Hz – – 13 VA 13 VA
G3/8 6 8208170.805x.xxxxx 0…2 230 49 230 V a.c. 40 … 60 Hz – – 13 VA 13 VA
G1/4 8 8208080.805x.xxxxx 0…1 *1) Note: A.c. with rectifier plug.
G3/8 8 8208180.805x.xxxxx 0…1
Dimensions
82080 B
35 34
20,5
Model Port size Orifice B *2) H H1 L

1
40
8208000.805x.xxxxx G1/4 3 70 90 77 44
H1
2
H
8208100.805x.xxxxx G3/8 3 70 90 77 44
PA 0-7 bar
3 mm
8208060.805x.xxxxx G1/4 4,5 70 90 77 44
DN
Tmax 110°C
8208160.805x.xxxxx G3/8 4,5 70 90 77 44

8208070.805x.xxxxx G1/4 6 70 90 77 44
7,5
8208170.805x.xxxxx G3/8 6 70 90 77 44
L
20 M5 8208080.805x.xxxxx G1/4 8 70 90 77 44
33,5 8208180.805x.xxxxx G3/8 8 70 90 77 44
1 Solenoid rotatable 4 x 90° *2) B = max. depth


+34 986 288118

3 Series 83150, 83153
VALVES

Technical Data
• DN 1,5 … 8, G1/4 … 3/8
• Series 83150 vertical on top
Flow direction:
- Solenoid interchangeable Determined Differential pressure:
without tools (Click-on®) 0,1 bar required
- Good corrosion resistance
83150 83153
Port size DN 2,5 … 4,5 DN 1,5 … 4,5
Operating pressure 0 … 3/4/12 bar 0 … 3/4/5/12/16 bar
Temperature
Media temperature 0°C … +125°C 0°C … +125°C
Ambient temperature 0°C … +50°C 0°C … +50°C
Material
354
Body PPSU (Polyphenylsulfon) PPSU (Polyphenylsulfon)

Seat seal EPDM EPDM
Internal parts Stainless steel Stainless steel
Standard models
Port Orifice Series 83150 Operating pressure Series 83153 Series 83153 Series 83153 Operating pressure
size (mm) Model (bar) Model Inlet Model Middle Model End (bar)
9846 9830 9837 9897 9846 9837
6/4 1,5 – – – – – 8315300.98xx.xxxxx 8315310.98xx.xxxxx 8315320.98xx.xxxxx 16 12
6/4 2,5 8315000.98xx.xxxxx 12 12 4 4 – – – – –
6/4 2,5 8315003.98xx.xxxxx 4 4 – – – – – – –
6/4 2,5 – – – – – 8315301.98xx.xxxxx 8315311.98xx.xxxxx 8315321.98xx.xxxxx 12 5
6/4 3,5 8315001.98xx.xxxxx 4 4 – – – – – – –
6/4 3,5 – – – – – 8315302.98xx.xxxxx 8315312.98xx.xxxxx 8315322.98xx.xxxxx 4 –
8/6 4,5 8315002.98xx.xxxxx 3 3 – – – – – – –
8/6 4,5 – – – – – 8315303.98xx.xxxxx 8315313.98xx.xxxxx 8315323.98xx.xxxxx 3 –
4 PIF *1) 1,5 – – – – – 8315305.98xx.xxxxx 8315315.98xx.xxxxx 8315325.98xx.xxxxx 16 12
4 PIF *1) 2,5 8315020.98xx.xxxxx 12 12 4 4 – – – – –
4 PIF *1) 2,5 8315023.98xx.xxxxx 4 4 – – – – – – –
4 PIF *1) 3,5 8315021.98xx.xxxxx 4 4 – – – – – – –
6 PIF *1) 2,5 – – – – – 8315306.98xx.xxxxx 8315316.98xx.xxxxx 8315326.98xx.xxxxx 12 5
6 PIF *1) 3,5 – – – – – 8315307.98xx.xxxxx 8315317.98xx.xxxxx 8315327.98xx.xxxxx 4 –
6 PIF *1) 4,5 – – – – – 8315308.98xx.xxxxx 8315318.98xx.xxxxx 8315328.98xx.xxxxx 3 –
*1) Note: Push-in fitting.
Series 83150: Valve design No. 00, 01, 03 compression fitting Ø 6 mm. Valve design No. 02 compression fitting Ø 8 mm. Valve design No. 20 … 23 Push-in fitting Ø 4 mm.
Solenoids
Options
9846 9830 9837 9897
Voltage 24 V d.c. Voltage 24 V d.c. Voltage 24 V d.c. Voltage 24 V 40 … 60 Hz a.c. 9 VA
d.c. 9,5 W d.c. 9,5 W d.c. 11 W Voltage range ±10%
Voltage range ± 10% Voltage range ± 10% Voltage range +0% / -5% Duty cycle
Duty cycle Duty cycle Duty cycle 40% ED 3 min SD
40% ED 3 min SD 100% ED 50% ED 1 min SD Plug with rectifier
Terminals 6,3 x 0,8 Terminals 6,3 x 0,8 Terminals 6,3 x 0,8 EN175301-803A
Protection class IP 00 Protection class IP 00 Protection class IP 00 Protection class IP 00

+34 986 288118

Series 83150, 83153
3
VALVES
Dimensions
83150
831500x 831502x 9846.02400 9830.02400 9837.02400
1 1 26,2
26 10,4 30 30 26,5 22
ø6
ø4
ø18,5
15
15
24V 9,5W
24V 9,5W
24V 9,5W
9,5W
9840
9840
9840
9840
31
33
31
24V
5
5
(15) 15 (20) 16 (16,5) 11
30 36 27,5
9897.23049
57±1,5
55±1,5
57±1,5
55±1,5
ø14
ø18
56±1,5 47±1,5
~52
33
16
30
~46,5
~72
83153
355
Inlet Middle
2 P 1 Mounting holes
Ø 3,8 x 9 mm deep
23,5±0,15
P A
A 2 Mounting holes
23,5±0,15
Ø 2,5 x 11,5 mm deep

P 2 3 Mounting holes
3±0,05
P Ø 3,8 x 9 mm deep
18,5±0,1 3±0,05
18,5±0,1
4 Tubing plug 1702467
5 O-ring 1702427
56,3±1,5
57±1,5
56,3±1,5
57±1,5
3 3
Ø6
9,5±0,1
Ø6
18±0,1
9,5
3,5±0,05 22,5±0,15 1,5

65±1,5
29,5±0,15 47,5±1,5
End Tubing plug an O-ring

Please order O-ring No. 1702427 separately.
P
4
5
23,5±0,15
A
P
P 3±0,05
SW 6
15,6
17,8
18,5±0,1
Ø8
13,8 5
11
56,3±1,5
57±1,5
Recommendation:
9,5±0,1
Ø6
- Interlink a maximum of 7 valves

- Fix the interlinked manifold with a bolting at inlet and outlet
59,6±1,5

+34 986 288118
2/2-WAY FORCE LIFTED VALVES, BACK PRESSURE TIGHT

3 Series 85340, 85440
VALVES

Technical Data
• DN 12 … 50, G1/2 … 2
Flange connection Switching function: Mounting position:
Normally closed; no switching Solenoid vertical on top
• Valve works without minimum function at back pressure
pressure differential
Flow direction:
• Up to 16 bar backpressure Determined
tight with leak rate E according
to DIN EN 12266-1
85340 85440
Medium Slightly aggressive fluids Slightly aggressive fluids
Port size DN 15 … 50 DN 12 … 50, G1/2 … 2
Operating pressure P > A: 0 … 25 bar P > A: 0 … 25 bar
A > P: 0 … 16 bar, backpressure tight A > P: 0 … 16 bar, backpressure tight
Temperature
Media temperature 0°C … +90°C 0°C … +90°C
356
Ambient temperature 0°C … +50°C 0°C … +50°C

Material
Body Stainless steel (1.4408) G1/2: manifold of stainless steel (1.4305)
G3/4 … 2: stainless steel (1.4408)
Seat seal NBR NBR
Internal parts Stainless steel Stainless steel, PTFE/carbon
Standard models
Port size Series 85340 Operating pressure Back pressure tight Series 85440 Operating pressure Back pressure tight
Model (Flange) (bar) (bar) Model (bar) (bar)
15 8534200.840x.xxxxx 0 … 25 0 … 16 8544200.840x.xxxxx 0 … 25 0 … 16
20 8534300.840x.xxxxx 0 … 25 0 … 16 8544300.840x.xxxxx 0 … 25 0 … 16
25 8534400.840x.xxxxx 0 … 25 0 … 16 8544400.840x.xxxxx 0 … 25 0 … 16
32 8534500.950x.xxxxx 0 … 25 0 … 16 8544500.950x.xxxxx 0 … 25 0 … 16
40 8534600.950x.xxxxx 0 … 25 0 … 16 8544600.950x.xxxxx 0 … 25 0 … 16
50 8534700.950x.xxxxx 0 … 25 0 … 16 8544700.950x.xxxxx 0 … 25 0 … 16

Voltage and frequency solenoid • Manual override
Code Voltage Code Voltage Frequency Power consumption • Seat seal FPM
Frequency Inrush Holding Inrush Holding • Seat seal PTFE
8401/8404 *1) 9501/9504 *1) • Seat seal EPDM
024 00 24 V d.c. – 40 W 40 W 80 W 80 W
• Electrcal position indicator
024 49 24 V a.c. 40 … 60 Hz 45 VA 45 VA 89 VA 89 VA
• Flanges acc. to ASME B
110 49 110 V a.c. 40 … 60 Hz 45 VA 45 VA 89 VA 89 VA
16.5 150 lb/sq.In.
120 49 120 V a.c. 40 … 60 Hz 45 VA 45 VA 89 VA 89 VA
• Flanges 48 acc. to ASME
230 49 230 V a.c. 40 … 60 Hz 45 VA 45 VA 89 VA 89 VA
B 16.5 300 lb/sq.In.
*1) Note: A.c. only with rectifier plug.

+34 986 288118
2/2-WAY FORCE LIFTED VALVES, BACK PRESSURE TIGHT

Series 85340, 85440
3
VALVES
Dimensions
Socket turnable 4 x 90°
85340 with solenoid 840x (Socket included)
75 93,5
H
1
øB
Model Orifice øB ø F max. F H L
8534200.840x.xxxxx *2) 15 44 96 77 154 130
P A
DN
8534300.840x.xxxxx 20 50 110 86,6 162 150

8534400.840x.xxxxx 25 62 120 95,1 167,5 160
L
¨F
øF *2) Manifold of stainless steel (1.4408).

ø 115
1
H
øB
357
Model Orifice øB ø F max. F H L
P A 8534500.950x.xxxxx 32 92 140 110,7 260 180
DN
8534600.950x.xxxxx 40 92 150 117,8 260 200
L
8534700.950x.xxxxx 50 109 165 128,4 248 230
¨F
øF

76,5
39 93,5
H1
1
H
Model Port size øA H H1 L L1 T

8544200.840x.xxxxx *3) G1/2 44 166,5 150 80 40 14
8544300.840x.xxxxx G3/4 50 166,5 150 80 38,6 16
8544400.840x.xxxxx G1 62 184 164 95 45,6 18
8,5
P A
6,5
R
30
*3) Manifold of stainless steel (1.4408).
T ØA
L1 48,5
L

Ø 115
1
H1
H
Model Port size øA H H1 L L1 T

8544500.950x.xxxxx G1 1/4 92 186 253 132 60 20
P A 8544600.950x.xxxxx G1 1/2 92 286 253 132 60 22
R
8544700.950x.xxxxx G2 109 N.D. N.D. 160 74 24

T ØA
L1
L

+34 986 288118

3 Series 86540, 86580
VALVES

Technical Data
• DN 15 … 50, Flange connection,
Pressure rating PN 40 Switching function: Mounting position:
• Valve operates without differential vertical on top
pressure (Zero delta P) Flow direction:
Determined
• Valve piston with PTFE guide-ring
• Suitable for vacuum
86540 86580
Medium Slightly aggressive gases and liquid fluids Slightly aggressive gases and liquid fluids
Port size DN 15 … 50 DN 15 … 50
Temperature
358

Material
Body Stainless steel (1.4408) Stainless steel (1.4408)
Seat seal NBR NBR
Internal parts Stainless steel, PTFE/carbon Stainless steel
Standard models
Orifice Series 86540 Operating pressure Series 86580 Operating pressure
15 8654200.830x.xxxxx 0 … 25 8658200.840x.xxxxx 0 … 25
20 8654300.830x.xxxxx 0 … 25 8658300.840x.xxxxx 0 … 25
25 8654400.830x.xxxxx 0 … 25 8658400.840x.xxxxx 0 … 25
32 8654500.840x.xxxxx 0 … 25 8658500.840x.xxxxx 0 … 25
40 8654600.840x.xxxxx 0 … 25 8658600.840x.xxxxx 0 … 25
50 8654700.840x.xxxxx 0 … 25 8658700.840x.xxxxx 0 … 25

Code Voltage Code Voltage Frequency Power consumption
Frequency Inrush Holding Inrush Holding
8401/8404 *1) 8301/8304 *1)
024 00 24 V d.c. – 40 W 40 W 22 W 22 W
024 49 24 V a.c. 40 … 60 Hz 45 VA 45 VA 25 VA 25 VA
110 49 110 V a.c. 40 … 60 Hz 45 VA 45 VA 25 VA 25 VA
120 49 120 V a.c. 40 … 60 Hz 45 VA 45 VA 25 VA 25 VA
230 49 230 V a.c. 40 … 60 Hz 45 VA 45 VA 25 VA 25 VA

Options
• Inspection certificate DIN
EN 10204 - 3.1

+34 986 288118

Series 86540, 86580
3
VALVES
Dimensions

57 66
29
60
1
H
øB
P A
Model Orifice øB ø F max. H L
DN
8654200.830x.xxxxx 15 44 96 142 130

8654300.830x.xxxxx 20 50 110 150 150
8654400.830x.xxxxx 25 62 115 155 160
L
ØFmax.

76,5
39 93,5
359
81,5
2
1
H
øB
P A
DN
8654500.840x.xxxxx 32 92 140 184 180

8654600.840x.xxxxx 40 92 150 189 200
L
8654700.840x.xxxxx 50 109 165 197 230
ø F max.
86580
76,5
39 93,5
2
81,5

H
ØB
1 8658200.840x.xxxxx 15 44 96 142 130
8658300.840x.xxxxx 20 50 110 150 150
P A 8658400.840x.xxxxx 25 62 115 155 160
DN
8658500.840x.xxxxx 32 92 140 184 180

8658600.840x.xxxxx 40 92 150 189 200
8658700.840x.xxxxx 50 109 165 197 230
L
F Ø max.

2 Socket turnable 4 x 90°
(Socket included)

+34 986 288118

3 Series 85780, 85840
VALVES
• 2/2-way piston valves • Damped operation

Technical Data
• DN 15 … 100, Flange connection, • For systems with low or
Pressure rating PN 40 (PN 25) fluctuating pressure Switching function: Mounting position:
• Suitable for use in single-channel • Valve operates without vertical on top
safety-related systems in differential pressure Flow direction:
85780/85840 accordance with Determined
DIN EN 61508 / 61511 up to and
including SIL 2 and up to and
including SIL 3 in multi-channel
systems
• High flow rate
• For robust industry applications
85780 85840
Medium Neutral gases and liquid fluids Air, water, gases according to DVGW data sheet G 260
(air, water, gases according to DVGW datasheet G 260 with seat seal FPM, oils and other fluids on request
with seat seal FPM – oils and other fluids on request)
Port size DN 15 … 100 DN 8 … 50, G1/4 … 2
Temperature
360

Material
Body Up to DN 50: stainless steel (1.4408) Stainless steel (1.4408)
From DN 65: stainless steel (1.4581)
Seat seal NBR NBR
Internal parts Stainless steel, PTFE/carbon Stainless steel, PTFE/carbon
Standard models
8 – – 8584000.840x.xxxxx 0 … 25
10 – – 8584100.840x.xxxxx 0 … 25
12 – – 8584200.840x.xxxxx 0 … 25
15 8578200.840x.xxxxx 0 … 25 8584300.840x.xxxxx 0 … 25
20 8578300.840x.xxxxx 0 … 25 8584400.840x.xxxxx 0 … 25
25 8578400.840x.xxxxx 0 … 25 8584500.840x.xxxxx 0 … 25
32 8578500.840x.xxxxx 0 … 25 8584600.840x.xxxxx 0 … 25
40 8578600.840x.xxxxx 0 … 25 8584700.840x.xxxxx 0 … 25
50 8578700.840x.xxxxx 0 … 25 – –
65 8578800.950x.xxxxx 0 … 25 – –
80 8578900.950x.xxxxx 0 … 25 – –
100 8579000.950x.xxxxx 0 … 25 – –

Voltage and frequency solenoid • Inspection certificate DIN EN
Code Voltage Code Voltage Frequency Power consumption 10204 - 3.1 (DN 15 … 50)
Frequency Inrush Holding Inrush Holding • Inspection certificate DIN EN
8401/8404 *1) 9501/9504 *1) 10204 - 3.1 (DN 65 … 100)
024 00 24 V d.c. – 40 W 40 W 80 W 80 W
024 49 24 V a.c. 40 … 60 Hz 45 VA 45 VA 89 VA 89 VA
110 49 110 V a.c. 40 … 60 Hz 45 VA 45 VA 89 VA 89 VA
120 49 120 V a.c. 40 … 60 Hz 45 VA 45 VA 89 VA 89 VA
230 49 230 V a.c. 40 … 60 Hz 45 VA 45 VA 89 VA 89 VA


+34 986 288118

Series 85780, 85840
3
VALVES
Dimensions
85780 with solenoid 840x 1 Solenoid rotatable 360°
76,5
39 93,5
(Socket included)
81,5
2
H
øB 1

P A 8578200.840x.xxxxx 15 44 96 154 130
DN
8578300.840x.xxxxx 20 50 110 163 150

L
8578400.840x.xxxxx 25 62 115 168 160
ø F max.

76,5
39 93,5
81,5
øB 1
H
361
P A
8578500.840x.xxxxx 32 92 140 184 180
DN
8578600.840x.xxxxx 40 92 150 190 200

8578700.840x.xxxxx 50 109 165 197 230
L
ø F max.

69
ø 115
122,1
øB
H

P A 8578800.950x.xxxxx 65 195 185 327 290
ø F max.
DN
8578900.950x.xxxxx 80 220 200 347 310

8579000.950x.xxxxx 100 265 235 376 350
290
85840
76,5 x 93,5
39 75,5 x 93,5
39

8584000.840x.xxxxx G1/4 44 163,5 152,5 60 27 12
81,5
81,5
2 2 8584100.840x.xxxxx G3/8 44 163,5 152,5 60 27 12

1
8584200.840x.xxxxx G1/2 44 166 152 67 31 14
H1
H
1
H
H1
ØA
8584300.840x.xxxxx G3/4 50 174 157,5 80 35,5 16

ØA
8584400.840x.xxxxx G1 62 184,5 164 95 44 18

8584500.840x.xxxxx G1 1/4 92 212,5 183,5 132 60 20
8584600.840x.xxxxx G1 1/2 92 212,5 183,5 132 60 22
P A
R
P A 8584700.840x.xxxxx G2 109 226,5 192 160 74 24

R
T
L1
T
L
L1
L

+34 986 288118

3 Series 86500, 86520
VALVES

Technical Data
• DN 15 … 50, Flange connection,
Pressure rating PN 40 Switching function: Mounting position:
• Valve operates without differential vertical on top
pressure (Zero delta P) Flow direction:
Determined
• Valve piston with PTFE guide-ring
• Series 86500:
86500 86520
Medium Neutral gases and liquid fluids Neutral steam and liquid fluids
Port size DN 15 … 50 DN 15 … 50
Temperature
Media temperature -20°C … +90°C 0°C … +200°C
Ambient temperature -20°C … +50°C 0°C … +60°C
362
Material
Body Cast steel, brass Stainless steel (1.4408), brass
Seat seal NBR PTFE
Internal parts Stainless steel, PTFE/carbon, brass Stainless steel, PTFE/carbon, FPM
Standard models
(mm) Model (Flange) (bar) Model (Flange) (bar)
15 8650200.830x.xxxxx 0 … 25 8652200.840x.xxxxx 0 … 16
20 8650300.830x.xxxxx 0 … 25 8652300.840x.xxxxx 0 … 16
25 8650400.830x.xxxxx 0 … 25 8652400.840x.xxxxx 0 … 16
32 8650500.840x.xxxxx 0 … 25 8652500.840x.xxxxx 0 … 16
40 8650600.840x.xxxxx 0 … 25 8652600.840x.xxxxx 0 … 16
50 8650700.840x.xxxxx 0 … 25 8652700.840x.xxxxx 0 … 16

Voltage and frequency solenoid • Normally open (NO)
Code Voltage Code Voltage Frequency Power consumption • Manual override
Frequency Inrush Holding Inrush Holding • Seat seal FPM
8401/8404 *1) 8301/8304 *1)
• Seat seal PTFE
024 00 24 V d.c. – 40 W 40 W 22 W 22 W
• Seat seal EPDM
024 49 24 V a.c. 40 … 60 Hz 45 VA 45 VA 25 VA 25 VA
• Max. operating pressure 40 bar
110 49 110 V a.c. 40 … 60 Hz 45 VA 45 VA 25 VA 25 VA
120 49 120 V a.c. 40 … 60 Hz 45 VA 45 VA 25 VA 25 VA • Position indicator
230 49 230 V a.c. 40 … 60 Hz 45 VA 45 VA 25 VA 25 VA


+34 986 288118

Series 86500, 86520
3
VALVES
Dimensions
86500 with solenoid 830x 1 Solenoid rotatable 360°

76,5 (Socket included)
39 93,5
2
H1
H

8,5
P A
8650200.830x.xxxxx 15 44 96 134 130
R
6,5
30
8650300.830x.xxxxx 20 50 110 142 150
T ØA 8650400.830x.xxxxx 25 62 115 148 160
L1 48,5
L
363
76,5
39 93,5
81,5
1
H
øB

P A
8650500.840x.xxxxx 32 92 140 184 180
DN
8650600.840x.xxxxx 40 92 150 189 200

8650700.840x.xxxxx 50 109 165 197 230
L
ø F max.
86520
76,5
39 93,5
2
81,5
1
H
Model Orifice ø F max. H L

8652200.840x.xxxxx 15 96 142 130
8652300.840x.xxxxx 20 110 150 150
8652400.840x.xxxxx 25 115 155 160
P A
DN
8652500.840x.xxxxx 32 140 184 180

8652600.840x.xxxxx 40 150 189 200
8652700.840x.xxxxx 50 165 197 230
L F max.

+34 986 288118
2/2-WAY MOTOR OPERATED VALVES

3 Series 82880
VALVES

Technical Data
• G1/2 … 1
• Low power consumption
• Wear-resistant ceramic vertical on top
Flow direction:
rotary action sliding plate Determined
• Valve remains on last
setting if power is lost
• Will handle contaminated fluids
82880
Medium Neutral gases and liquids
Port size DN 15, DN 20
Operating pressure -0,9 … 6/10 bar
Temperature
Material
364
Body Brass (CW617N)

Seat seal NBR
Internal parts Oxyd-ceramic
Standard models
Port size Orifice Series 82880 *1) Operating pressure
(mm) Model (bar)
Cartridge 15 8288500.96xx.xxxxx -0,9 … 10
G1/2 15 8288200.96xx.xxxxx -0,9 … 10
G3/4 20 8288300.96xx.xxxxx -0,9 … 6
G1 20 8288400.96xx.xxxxx -0,9 … 6
*1) Note: See motor drives for motor cat no and power supply.
Models - Stepping motor 9668 / D.c. motor 9651

Port size Orifice Series 82880 *1) Operating pressure *2) Flow kv value *2)
(mm) Model (bar) (m3/h)
Cartridge 15 8288500.9668.02400 -0,9 … 10 1,1
G1/2 15 8288200.9668.02400 -0,9 … 16 1,1
G3/4 20 8288300.9668.02400 -0,9 … 16 4,4
G1 20 8288400.9668.02400 -0,9 … 16 4,4
*2) Note: If operating pressure > 10 bar longer duration possible, avoid long downtimes.
Motor
Port size Standard voltage Frequency Power Protection Torque Operating time Model *1)
Tolerance ± 10% consumption class through *4) 90° 6
(V) (Hz) (VA/W) (Ncm)
D.c. motor 24 V – 1,5 IP54 120 10 … 14 9615.02400
Synchronousmotor 24 V 50 3 IP54 120 10 9636.02450
Stepping motor 24 V *3) 5 IP54 120 10 9638.02400
D.c. motor 24 V – 2,5 IP54 200 13 … 16 9651.02400
Stepping motor 24 V 0 3,3 max. 9,1 IP54 120 *5) 5 9668.02400
*3) Nominal stepping frequency 200 Hz. *4) Operating time depends on operating pressure. *5) Short duration max. 300 Ncm.

+34 986 288118
2/2-WAY MOTOR OPERATED VALVES

Series 82880
3
VALVES
Dimensions
82880 up to G1/2
77 40
82 x 53
37
M16x1,5
H1
H
A P Model Port size B H H1 L

G
8288200.96xx.xxxxx G1/2 55 147 134 65

8
B
L M5 30
82880 G3/4 … 1
77 40
82 x 53
365
37
M16x1,5
H1
H

A P 8288300.96xx.xxxxx G3/4 70 164 140 95
R
8288400.96xx.xxxxx G1 70 164 140 95

3B
L

+34 986 288118
n e ere d.
.E n g i
ion
Precis
IMI Herion
Specialist in solenoid valves, NAMUR
valves and hydraulic solutions
For over 50 years the IMI Herion brand has specialised in
solenoid valves, NAMUR valves and hydraulic solutions for
mechanical and pneumatic press and press safety technology.
The IMI Herion brand offers a comprehensive range of robust pilot
and control valves and pressure switches that are ideally suited to
aggressive and harsh environments and are offered with a wide range
of global certifications and approvals including ATEX and SIL.
Engineering
GREAT Solutions

+34 986 288118
SOLENOID ACTUATED NAMUR VALVE

97100 6 mm orifice (ND) – 3/2, 5/2, 5/3 APB, G1/4 3
• 3/2 or 5/2 way function
Technical Data Materials
VALVES
via adapter plates
• Rest position in the event of power Medium: Housing:
failure (monostable design) Compressed air filtered, lubricated or Aluminium anodized
non-lubricated Pilot flange:
• Manual override with detent
Operating pressure: Plastic (PBT)
2 … 8 bar Flange plate:
Flow direction: Aluminium
Fixed Seals:
Mounting position: NBR
Optional
Ambient temperature:
Valve: -15°C … +50°C
Solenoid: See solenoid table
With minus temperatures, use conditioned dry air. If
installed in the open protect all connections against the
penetration of moisture.
Air supply must be dry enough to avoid ice formation
at temperatures below +2°C
Dimensions
1 Solenoid/Spring 5 1 3 2 Solenoid/Solenoid
5 1 3
40
32
4 2
40
32
4 2
131,5
38,5
367
203
110
1
0
37
25
1
0
0
1
37,2
25
7,2
7,2
3
13
M5
19,5
3
13
5,5 M5
19,5
5,5
Models – 3/2, 5/2 and 5/3 valves

Model Voltage Actuation Port size Function Flow Dimension
1 3 (5) 2, 4 (l/min) No.
9710000303602400 24 V d.c. Solenoid/Spring G1/4 G 1/8 Flange 5/2 750 1

9710000303623050 230 V a.c
9711000303602400 24 V d.c. Solenoid/Solenoid G1/4 G 1/8 Flange 5/2 750 2
9711000303623050 230 V a.c
9712000303602400 24 V d.c. Solenoid/Solenoid G1/4 G 1/8 Flange 5/3 APB 500 2
9712000303623050 230 V a.c
APB = All Ports Blocked. Exterior free of non-ferrous metals. For models without coil, replace the last nine digits of the part number with 000000000.
Solenoid details
3/2, 5/2 and 5/3 valves
Power Consumption Protection class Temperatures °C Electrical connection Solenoid code
24 V d.c. 230 V a.c. ambient/fluid
(W) (VA)
1,6 3,5 IP 65 (with connector) -15 … +50 DIN EN 175301-803 3036

Form A 6)
Standard voltages 24 V d.c., 230 V a.c. Other voltages on request. Design acc. to VDE 0580, EN 50014/50028. 100% duty cycle.
6) Connector not supplied; required connector for d.c.: part no. 0570275 Form A, see ‘Accessories’ table.

+34 986 288118

3 97100 6 mm orifice (ND) – 3/2, 5/2, 5/3 APB, G1/4
Models – 3/2, 5/2 and 5/3 valves for minimal electrical power
VALVES
Model Voltage Actuation Port size Function Flow Dimension

24 V d.c. 1 3 (5) 2, 4 (l/min) No.
9710002305002400 24 V d.c. Solenoid/Spring G1/4 G1/8 Flange 5/2 750 1

9710002303402400 24 V d.c.
9710002303420600 230 V a.c.
9712002305002400 24 V d.c. Solenoid/Solenoid G1/4 G1/8 Flange 5/3 APB 500 2
9712002303402400 24 V d.c.
9712002303420600 230 V a.c.
APB = All Ports Blocked. Exterior free of non-ferrous metals. For models without coil, replace the last nine digits of the part number with 000000000.
Solenoid details
3/2, 5/2 and 5/3 valves for minimal electrical power
Power Consumption Rated current Protection class Temperatures °C Electrical connection Solenoid
24 V d.c. 230 V a.c. 24 V d.c. 230 V a.c. ambient/fluid code
(W) (VA) (mA) (mA)
368
1,7 – 70 – IP 65 (with connector) -15 … +50 DIN EN 175301-803 3050

Form B 6)
0,7 2 29 – IP 65 (with connector) 2) -15 … +50 DIN EN 175301-803 3034

Form A 6)
Standard voltages 24 V d.c., 230 V a.c. Other voltages on request. Design acc. to VDE 0580, EN 50014/50028. 100% duty cycle.
2) Valves can be operated with d.c. only. For 230 V a.c. application please use 206 V d.c. coil together with rectifier plug 0663303.
6) Connector not supplied; required connector for d.c.: part no. 0680003 Form B and 0570275 Form A, see ‘Accessories’ table.
Conversion instructions Electrical connection M12 x 1

Model Pin Cable
5/2 way function (original mode of supply)
1 brown
3 2
3/2 resp. 5/2 way function can 2 white

5
be achieved just by swapping 4 1
3 blue
5/2 enclosed adaptor plates. Make sure 4 black
Marker and Arrow do match as
7 6
shown on drawing at left. Original
mode of supply: 5/2 function.
3/2 way function Accessories
6 Arrow
7 Marker Silencer Connectors
3/2
7 6
M/S2 (G1/8)* 0570275000000000 Form A

0663303000000000 Form A with rectifier
0680003000000000 Form B
* For indoor use.

+34 986 288118
SOLENOID ACTUATED INLINE VALVE

97100 6 mm orifice (ND) – 3/2, 5/2, 5/3 APB, G1/4 3
• For single and double
VALVES
operated actuators
• Crossover-free switching, switch- Medium: Housing:
over function guaranteed even with Compressed air filtered, lubricated or Aluminium 3.0615 anodized
small cross section air supply non-lubricated Pilot flange:
• Manual override with detent standard Operating pressure: Plastic (PBT)
2 … 8 bar Seals:
• EX-Protection (ATEX-Category)
Flow direction: NBR
Fixed
Mounting position:
Optional
Valve: -15°C … +80°C
Solenoid: See solenoid table
With minus temperatures, use conditioned dry air. If
installed in the open protect all connections against the
Dimensions
369
1 3/2 Solenoid/air spring 2 5/2 Solenoid/air spring
43
1 2 24 1 2 44
4,5 4,5
2 4 2
~ 21
~ 21
12
40
26
26
40
29
(14,5)
29
28
28
14,5
17
17
3 1 5 1 3
~8 21 ~8 10 ~53
20 42
70 90
~136 ~156
6,5
3 3,2 6,5
3 21 3
1 Solenoid 90° turnable

22
20
25
2 Manual override
20
25
22
1
0
1
0
46
66
3 Port size G1/4 or 1/4 NPT
3 5/2 Solenoid/solenoid 4 5/3 APB Solenoid/solenoid

1 2 44 1 2 44
4,5 4,5
4 2 4 2
~ 21
~ 21
26
26
40
40
29
29
14,5
28
14,5
28
14(10) 12(10) 14(10) 12(10)

17
17
5 1 3 5 1 3
~8 10 ~8 10
42 42
90 90 18
~103 120,5
~206 ~223
6,5
3 21 3,2 6,5
3 21 3,2
0
1
25
20
22
1
0
0
1
25
20
22
66
0
1
66

+34 986 288118

3 97100 6 mm orifice (ND) – 3/2, 5/2, 5/3 APB, G1/4
Models
VALVES
Model *1) Actuation Port size Function Flow Dimension No.

(l/min)
9713032000000000 Solenoid/Air spring G1/4 3/2 750 1

9710032000000000 Solenoid/Air spring G1/4 5/2 750 2
9711032000000000 Solenoid/Solenoid G1/4 5/2 750 3
9712032000000000 Solenoid/Solenoid G1/4 5/3 APB 500 4
*1) Models shown are without coil. When ordering, please indicate solenoid, voltage and current (frequency).
NOTE:To order one valve you need to add the following information:
- Valve body part number according to the Model column without 000000000.
- Solenoid code according to the table below.
- Voltage and frequency: 02400 for 24V d.c. and 23050 for 230V a.c.
Valve function: APB = All Ports Blocked.
Solenoid details
Solenoid Power consumption Rated current Protection class Ex-Protection Temperature Electrical connection
code IP/NEMA (ATEX-Category) Ambient/Media
24 V d.c. 230 V a.c. 24 V d.c. 230 V a.c. (°C)
(W) (VA) (m A) (m A)
3050 1,8 – 70 – IP65 – -15 … +50 Connector DIN EN
(with connector) 175301-803,
form B *1)
370
3034 0,7 2,0 *2) 29 4 IP65 – -15 … +50 Connector DIN EN

(with connector) 175301-803,
form A *1)
3046 2 – 85 – IP65 II 3 G Ex nA IIC T5 Gc -15 … +50 Special connector

(with connector) II 3 D Ex tc IIIC DIN EN
T95° Dc IP65 175301-803,
form A *1)
3062 2,7 – 115 – IP65 II 2 G Ex mb IIC T5 Gb -20 … +50 *2) Cable length 3 m
(with connector) II 2 D Ex mb tb T95°C Db
3063 – 2,1 – 9 IP65 II 2 G Ex mb IIC T5 Gb -20 … +50 *2) Cable length 3 m

(with connector) II 2 D Ex mb tb T95°C Db
3071 2,7 – 115 – IP65 – -10 … +50 Connector *1)

(with connector) M12x1, DIN IEC
61076-2-101
Solenoid with yellow LED
Standard voltages (±10%) 24 V d.c., 230 V a.c., other voltages on request. Design according to VDE 0580, EN 50014/50028. 100% duty cycle.
*1) Connector is not scope of delivery, see table »Accessories«.
*2) For battery installation +40°C only.
Electrical connection M 12 x 1 Solenoid details

Pin Signal Cable Model Approvals
ATEX IECEx FM
304x PTB 06 ATEX 2055 – –
3 2
306x PTB 03 ATEX 2015 – –
5
307x EC-Declaration of Conformity – –
4 1
1 + UB brown
2 Out 2 (PNP) / analogue 4 to 20 mA white
3 0 Volt blue
4 Out 1 (PNP) black

+34 986 288118

97100 6 mm orifice (ND) – 3/2, 5/2, 5/3 APB, G1/4
3
Accessories
VALVES
Connectors Connectors
DIN EN 175301-803 M12 x 1 M12 x 1 Silencer
0570275000000000 Form A 0523055000000000 (without cable) 0523056000000000 (90°, without cable) M/S2 (G1/4)
0663300000000003 Form A (with rectifier) 0523057000000000 (2 m cable) 0523058000000000 (90°, 2 m cable length)
0680003000000000 Form B 0523052000000000 (5 m cable) 0523053000000000 (90°, 5 m cable length)
Manifold plates
2 stations 3 stations 4 stations 6 stations 12 stations
2221102000000000 2221103000000000 2221104000000000 2221106000000000 2221112000000000
371
Accessories for manifold plates
Blanking plate *1) Blanking plug for 2 station Pressure shut-off part *2) for 4 DIN mounting kit
and 3 station manifolds station up to 12 station manifolds
0100563000000000 0701209000000000 0100569000000000 0101796000000000
*1) For blocking of unused valve stations.

*2) Necessory for using two different pressure.
Options
• Alternative threads
• Intrinsically safe coils

+34 986 288118

3 97300 3/2, 5/2, G1/4
• For single and double

VALVES
acting actuators
• 3/2 or 5/2 way function in one valve Medium: Housing:
Compressed air filtered, lubricated or Aluminium anodized
• Manual override with detent non-lubricated Pilot flange:
• Compact design Operating pressure: Plastic (PBT)
• Options are available for the 2 … 8 bar Seals:
protection class EEx m and EEx ia, Flow direction: NBR
for zones 1, 2 (gases) ATEX cat. Fixed
II 2 G, EEx nA, for zones 2 (gases),
22 (dust) ATEX cat.II 3 GD ask your Mounting position:
Optional
Express team for more details
-15°C … +50°C
Dimensions
1 Solenoid/Spring 2 Solenoid/Solenoid
372
Models
Model Port size Function Flow Dimension Electrical connection
Voltage 1, 3, 5 2, 4 (l/min) No.
9730000305002400 24 V d.c G1/4 Flange 5/2, 3/2 Sol/Spring 1300 1 DIN EN 175301-803 Form B
9730000305023050 230 V a.c.
9730000303602400 24 V d.c G1/4 Flange 5/2, 3/2 Sol/Spring 1300 1 DIN EN 175301-803 Form A
9730000303623050 230 V a.c.
9731000305002400 24 V d.c G1/4 Flange 5/2, 3/2 Sol/Sol 1300 2 DIN EN 175301-803 Form B
9731000305023050 230 V a.c.
9731000303602400 24 V d.c G1/4 Flange 5/2, 3/2 Sol/Sol 1300 2 DIN EN 175301-803 Form A
9731000303623050 230 V a.c.
For valves without coils, substitute the last nine digits of the part number for 000000000.

+34 986 288118

97300 3/2, 5/2, G1/4
3
Solenoid details
VALVES
Power Consumption Protection Protection class Temperatures °C Electrical connection Solenoid code
24 V d.c. 230 V a.c. category ambient/fluid
(W) (VA)
1,8 4,3 – IP 65 (with connector) -15 … +50 DIN EN 175301-803 3050

Form B 1)
1,6 3,5 – IP 65 (with connector) -15 … +50 DIN EN 175301-803 3036

Form A 1)
Standard voltages 24 V d.c., 230 V a.c. Other voltages on request.

*1) Connector is not included in delivery; Required connectors 068003 form B or 0570275 form A.
Accessories
Silencer Connectors Flange plate Yoke
373
M/S2 (G1/8)* 0570275000000000 Form A 0612790000000000 Single connection plate 0540593000000000
0663303000000000 Form A with rectifier 0612791000000000 NAMUR-slot use in combination with 0612790 (Alu)
0680003000000000 Form B
* For indoor use.
Conversion instructions
5/2 way function (original mode of supply)
3/2 resp. 5/2 way function can

be achieved just by swapping
5/2 enclosed adaptor plates. Make sure
Marker and Arrow do match as
7 6
shown on drawing at left. Original
mode of supply: 5/2 function.
3/2 way function
6 Arrow
7 Marker
3/2
7 6

+34 986 288118
SOLENOID ACTUATED INLINE SPOOL VALVE

3 97105 3/2, 5/2 & 5/3, G1/4 – G1/2
• UV-approval based on type

VALVES
examination DIN EN 161,

DIN 3394 and IEC 61 508, Medium: Body:
multichannel up to SIL 3 Filtered, non-lubricated and dried Aluminium 3.0615 with surface
• Crossover-free switching compressed air, instrument air, nitrogen treatment for rough environmantal
and other non-flammable neutral, dry conditions. (Stainless steel DIN 50018:
• Suited for outdoor use under fluids Condensate test with alternating
critical environment conditions temperatures in sulphuric atmosphere,
Operating pressure:
• Variable valve solenoid combination 2,5 … 8 bar with internal air supply DIN 50021/ASTM B117-73:
• Add-on manual override 0 … 8 bar with external air supply Salt spray test with different
sodium chloride solutions, tested
Ambient/Media temperature: in ammonia atmosphere).
-40°C … +65°C (SNBR) Stainless steel 1.4404 (316 L)
-25°C … +80°C (HNBR)
Seals:
Depending on solenoid system
SNBR (special NBR) or HNBR
For outdoor installations must be protected all

connections against the penetration of moisture and a The solenoid valves are used
solenoid with IP66 protection must be used! in ATEX- zones, resulting from
Protection Class Atex-category of
solenoids (see table of solenoids).
374
Models – Housing: aluminium anodized: SNBR -40 … +65C *3)

Model *1) Port size Function Actuation/Return Operating pressure Flow Test certificate Dimension
(bar) (l/min) IEC 61508 *2) No.
9713535000000000 G 1/4 3/2 Solenoid/Spring 2,5 … 8 1300 x 1

9713555000000000 G 1/2 3/2 Solenoid/Spring 2,5 … 8 2600 2
9711535000000000 G 1/4 5/2 Solenoid/Solenoid 2,5 … 8 1300 5
9712535000000000 G 1/4 5/3 Solenoid/Solenoid, APB 2,5 … 8 950 7
Models – Housing: stainless steel: SNBR -40 … +65C *3)

Model *1) Port size Function Actuation/Return Operating pressure Flow Test certificate Dimension
(bar) (l/min) IEC 61508 *2) No.

9711735000000000 G 1/4 5/2 Solenoid/Solenoid 2,5 … 8 1300 5
*1) Models shown are without coil. When ordering please indicate solenoid, voltage and current type (frequency).
*2) Since May 2008, Date code A8192.
*3) For operation in plants according to IEC 61511/61508 -40°C … +40°C see test certificate (on request).

+34 986 288118
SOLENOID ACTUATED SPOOL VALVE

97105 3/2, 5/2 & 5/3, G1/4 – G1/2
3
Dimensions
VALVES
1 - 9713535, 9713735 2 - 9713555, 9713755
A
A
1 34 30,5 25 58,5
1
3 1 3 1
55
55
36
30
5,5
36
36
2 2
53 5,5 61,5
A
A
~ 109 125,5
~ 164 ~178,5
2 3
2 3
1,5
3,5
3,5
1,5
34
30
1,5
0
1
92 32 42
24 40,5
95
82
3 - 9710535, 9710735 4 - 9710555, 9710755

63 74
A
A
1 1
5,5
4 2 4 2
55
55
24
42
5,5
36
36
5 1 3 5 1 3
22 22 32 32
A
32 41
A
47 58
129
147
~184
375
~202
2 3 2 3
3,5
1
2
30
34
1
0
1
0
24 32
70 28 86 31
A-A
9 10 1 Solenoid
2 External control pressure connection G1/8
3 Working port G1/4, G1/2
9 Position of gasket internal pilot air
 Position of gasket external pilot air
5 - 9711535, 9711735 7 - 9712535

12
A
1 1 12
4 2 4 2
5,5
24
55
24
5,5
55
36
36
5 1 3 5 1 3
22 22 22 22
A
B
A
111 32 129 32
121 150
132
~260
~242
2 3
2 3
0
A-A B-B
0
1
1
30
30
1
0
1
0
12
12
24
24
86 70
104 70
9 9
A-A B-B
1 Solenoid
2 External control pressure connection G1/8
10 10 3 Working port G1/4, G1/2
9 Position of gasket internal pilot air
 Position of gasket external pilot air
9 9
10 10

+34 986 288118
SOLENOID ACTUATED NAMUR SPOOL VALVE

3 97105 3/2, 5/2 & 5/3, G1/4 – G1/2
• TUV-approval based on type

VALVES
examination DIN EN 161, DIN

3394 and IEC 61 508 Medium: Body:
• Valves for safety systems Filtered, non-lubricated and dried Aluminium 3.0615 with surface
multi-channel up to SIL 3 compressed air, instrument air, nitrogen treatment for rough environmantal
and other non-flammable neutral, dry conditions. Approved according
• Crossover-free switching fluids to DIN 50018: Condensate test
• Add-on manual override Operating pressure: with alternating temperatures in
• International approvals: 2,5 … 8 bar with internal air supply sulphuric atmosphere, DIN 50021/
0 … 8 bar with external air supply ASTM B117-73: Salt spray test with
IEC Ex, FM, CSA
different sodium chloride solutions,
(G1/2, 1/2 NPT or low power
tested in ammonia atmosphere).
pilot system only)
Stainless steel 1.4404 (316 L)
Ambient/Media temperature: The solenoid valves are used
Seals: in ATEX- zones, resulting from
Valve:
SNBR (special NBR) or HNBR Protection Class Atex-category of
-40°C … +65°C (SNBR)
-25°C … +80°C (HNBR) solenoids (see table of solenoids).
Depending on solenoid system.
For outdoor installations must be protected all

connections against the penetration of moisture and a
solenoid with IP66 protection must be used!
376
Models – Housing: aluminium anodized, pilot flange: SNBR -40°C … +65°C *3)
Model *1) Port size Actuation/Return Operating pressure Flow *4) Test certificate
1, 3, (5) 2, 4 (bar) (l/min) IEC 61508 *2)
9710505000000000 G1/4 Flange Solenoid/Spring 2,5 … 8 1300 x

9710595000000000 G1/2 Flange Solenoid/Spring 2,5 … 8 2600 –
9711505000000000 G1/4 Flange Solenoid/Solenoid 2,5 … 8 1300 –
Models – Housing: stainless steel, pilot flange: SNBR -40°C … +65°C *3)
Model *1) Port size Actuation/Return Operating pressure Flow *4) Test certificate
1, 3, (5) 2, 4 (bar) (l/min) IEC 61508 *2)
9710705000000000 G1/4 Flange Solenoid/Spring 2,5 … 8 1300 x

9711705000000000 G1/4 Flange Solenoid/Solenoid 2,5 … 8 1300 –
G 1/4 Flange Solenoid/solenoid Aluminium 2,5 … 8 bar.

*1) Models shown are without coil. When ordering please indicate solenoid, voltage and current type (frequency).
*2) Since May 2008, Date code A8192.
*3) For operation in plants according to IEC 61511/61508 -40°C … +40°C see test certificate (on request).
*4) Flow characteristics conforms to ISO6358 [6 » 5 bar].
Note for *4): Connecting pipe / Fitting: In order to ensure and a pressure collapse avoid the flow, the supply air cross section shouldwith 1/4: ≥ 8 mm; with 1/2:
≥≥ 10 mm. With smaller cross section the inlet (A1) should more largely, however at least equally large line at the port (A2; A1).

+34 986 288118
SOLENOID ACTUATED NAMUR SPOOL VALVE

97105 3/2, 5/2 & 5/3, G1/4 – G1/2
3
Dimensions
VALVES
1 - 9710505, 9710705 2 - 9711505, 9711705
5 1 3 5 1 3
95,5
124 71,5
3,5
3,5
4 2 4 2
45
32
45
32
1 Solenoid
6 15,2 6 15,2
3 Port G 1/4
19,7
1 19,7 1 6 NAMUR connection plate 3/2 or 5/2 way function
51 24
3 3
22 22
~ 106
~ 106
41
4,5
46
4,5
27,5
27,5
13,5
13,5
5/2 5/2
7
138 61,5
7
6
83,5
3 - 9710595 32 32 21 3
105,5
162
40
377
62
36
5/2
16
9
4 2 6
M6
2
1
70
45
5 1 3 1 Solenoid
40 36 40,5 2 External control pressure connection G1/8
128 19
3 Port G1/2
202,5
6 NAMUR connection plate 3/2 or 5/2 way function

+34 986 288118
SOLENOID OPERATORS & ACCESSORIES

3 97105 Inline/Namur
Solenoid operators
VALVES
Model Power consumption Rated current Ex-Protection Protection Class Temperature Electrical
(ATEX-Category) Ambient/Medium connection
24 V DC 230 V AC 24 V DC 230 V AC Nominal resistance (°C)
(W) (VA) (m A) (m A) (according to EN60529)
0763 1,9 2,1 *5) 78 11 – IP00 without Connector -25 … +60 DIN EN 175 301-803
IP65 (with Connector) Form A *5) *6)
4200 0,8 – 38 – II2G Ex e mb IIC T5/T6 Gb -40 … +80 T5 M20 X 1,5 *6)
-40 … +70 T6
II2D Ex tb IIIC T130°C Db -40 … +80
IP 66 (with cable gland)
4201 – 1,3 – 6 II2G Ex e mb IIC T5/T6 Gb -40 … +80 T5 M20 X 1,5 *6)
-40 … +70 T6
4602 0,8 – 33 – II2G Ex d mb IIC T5/T6 Gb -40 … +80 T5 M20 X 1,5 *6)
Ex e mb IIC T5/T6 Gb -40 … +70 T6
4603 – 1,3 – 6 II2G Ex d mb IIC T5/T6 Gb -40 … +80 T5 M20 X 1,5 *6)
Ex e mb IIC T5/T6 Gb -40 … +70 T6
Stainless Steel 4802 0,8 – 33 – II2G Ex mb d IIC T4/T6 Gb -40 … +50 T4 M20 X 1,5 *6)
Ex mb e II T4/T6 Gb -40 … +40 T6
4803 1,3 – 6 II2G Ex mb d IIC T4/T6 Gb -40 … +50 T4 M20 X 1,5 *6)
Ex mb e II T4/T6 Gb -40 … +40 T6
378
Standard voltages (±10%) 24 V d.c., 230 V a.c., other voltages on request. Design according to VDE Attention: The protection class for coil series 46xx and 48xx is determined by the choice of cable gland.
0580, EN 50014/50028. 100% duty cycle. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have
*5) Required connector: model 0570275 for V DC; model 0663303 for V AC, to be ordered Solenoid the protection class Ex d mb; if a cable gland with Ex e type of proteciton is used, the solenoid will have
Voltage 200V DC! protection class Ex e mb.
*6) Connector cable gland not supplied, see table »Accessories«.
Accessories
Cable gland Model Thread Cable Ø Material Protection class
Protection Ex e, Ex d (ATEX), Nickel (ATEX)
plated brass/stainless steel
0588819000000000 M 20x1,5 5,0 … 8,0 mm Nickel plated brass II2GD Ex e
0588851000000000 M 20x1,5 10 … 14 mm Nickel plated brass II2GD Ex d
0588925000000000 1/2-14-NPT 7,5 … 11,9 mm Nickel plated brass II2GD Ex d
0589385000000000 M 20x1,5 9,0 … 13 mm Model Approvals 1.4571 (316 Ti) II2GD Ex e
0589395000000000 M 20x1,5 7,0 … 12 mm Model Approvals 1.4571 (316 Ti) II2GD Ex d
0589387000000000 M 20x1,5 10 … 14 mm Model Approvals 1.4571 (316 Ti) II2GD Ex d
Connector Inlet filter Add-on manual override Add-on manual override

(for start-up only)
0570275000000000 0681173000000000 (1/4") 0553886000000000 (without detent) 0613379000000000 (without detent)

0663303 000000000 (with rectifier) 0553887000000000 (with detent)
*1) For indoors use only.

*2) For outdoors use ~ 0,2 (bar).
Approvals
Model Approvals
ATEX IECEx
42xx KEMA 98 ATEX 4452 X IECEx KEM 09.0068X
46xx PTB 02 ATEX 2085 X IECEx PTB 11.0094X
48xx PTB 06 ATEX 2054 X IECEx PTB 07.0039X

+34 986 288118
DIRECT SOLENOID ACTUATED POPPET VALVES

95000 1,5 … 6 mm orifice (ND) 2/2, NC/NO, G1/4 3
• Direct acting solenoid – operation
VALVES
down to zero bar pressure
• Short switching times Medium: Housing:
Neutral gaseous and liquid fluids Brass 2.0401 (Ms 58)
• Assembled oil and grease-free
Flow direction: Seals:
• For a.c. solenoid systems with Fixed NBR
integrated rectifier (40 … 60 Hz) Other see option selector
Mounting position:
• Includes solenoids for ATEX, Optional, preferably with solenoid on top Inner parts:
FM, CSA and XP approvals Stainless steel 1.4104 (430F),
Media temperature: Brass 2.0401 (Ms 58)
-25°C … +80°C NBR
-25°C … +80°C
For contaminated fluids installation of an upstream filter
is recommended
Dimensions
1 2 18 3
18 18
18
18
18
379
M4 M4
M4
27 27
~ 120
~ 120
~ 120
92,5
92,5
75,5
28,5
1 2 1 2
29,5
1 2
46,5
36 26 36 26
36 26
Models
Model Function Port size Orifice Operating pressure Flow Solenoid group Dimension
(mm) (bar) (l/min) No.
9500100xxxx***** 2/2 NC G1/4 1,5 0 … 40 70 13B 1

9500200xxxx***** 2/2 NC G1/4 2 0 … 35 120 13B 1
9500300xxxx***** 2/2 NC G1/4 3 0 … 10 200 13C 1
9500400xxxx***** 2/2 NC G1/4 4 0 … 12 350 13D 1
9501500xxxx***** 2/2 NC G1/4 5 0…5 450 16D 2
9501600xxxx***** 2/2 NC G1/4 6 0…5 550 16D 2
9502210xxxx***** 2/2 NO G1/4 2 0 … 40 70 13B 3
9502310xxxx***** 2/2 NO G1/4 3 0 … 10 160 13B 3
**** Insert solenoid code according to solenoid group from tables on page 381. ***** Insert voltage code from table below.
Voltage codes
24 V d.c. 02400
230 V a.c. 23050
Other voltages available, please call your please contact us.

+34 986 288118

3 96000 2 … 5 mm orifice (ND) 3/2, NC/NO, G1/4
• Direct acting solenoid – operation

VALVES
down to zero bar pressure

• Short switching times Medium: Housing:
Neutral gaseous and liquid fluids Brass 2.0401 (Ms 58)
• Assembled oil and grease-free
Flow direction: Seals:
• For a.c. solenoid systems with Fixed NBR
integrated rectifier (40 … 60 Hz) Others see option selector
Mounting position:
• Includes solenoids for ATEX, Optional, preferably with solenoid on top Inner parts:
FM, CSA and XP approvals Stainless steel 1.4104 (430F),
Media temperature: Brass 2.0401 (Ms 58)
-25°C … +80°C NBR
-25°C … +80°C
For contaminated fluids installation of an upstream filter
is recommended
Dimensions
1 2 18 3
18 18
18
18
18
2 M4
M4
380
27 27
27
G 1/8
G 1/8
~ 120
3
~ 120
3
~ 120
92,5
75,5
74,5
1 2
46,5
29,5
1 2
28,5
1 2
3
36 26 36 26
36 26
Models
Model Function Port size Orifice Operating pressure Flow l/min Solenoid group Dimension
(mm) (bar) No.
9600210xxxx***** 3/2 NC G1/4 2 0 … 10 120 13B 1

9600240xxxx***** 3/2 NC G1/4 2 0 … 18 120 13D 1
9600320xxxx***** 3/2 NC G1/4 3 0…6 200 13C 1
9600340xxxx***** 3/2 NC G1/4 3 0 … 14 200 13D 1
9601430xxxx***** 3/2 NC G1/4 4 0…8 350 16C 2
9601440xxxx***** 3/2 NC G1/4 4 0 … 10 350 16D 1
9601540xxxx***** 3/2 NC G1/4 5 0…7 450 16D 2
9602210xxxx***** 3/2 NO G1/4 2 0…9 100 13B 3
9602340xxxx***** 3/2 NO G1/4 3 0…9 160 13D 3
9602440xxxx***** 3/2 NO G1/4 4 0…6 300 16D 3
**** Insert solenoid code according to solenoid group from tables on page 381. ***** Insert voltage codes from table below.
Voltage codes
24 V d.c. 02400
230 V a.c. 23050
Other voltages available, please call your please contact us.

+34 986 288118
SOLENOID OPERATORS
95000 & 96000 Poppet Valves
3
VALVES
Model Power consumption Voltage Protection Protection class Temperatures °C Electrical connection Solenoid code
24 V d.c. 230 V a.c. 24 V d.c. 230 V a.c. category ambient/fluid
(W) (VA) (mA) (mA)
Group 13B 8,0 – 331 – – IP 65 -25 … +60 DIN EN 175301-803 0246 7)

(with connector) 5) Fluid: max. 80 Form A 6)
Group 13B – 9,2 – 40 – IP 65 -25 … +60 DIN EN 175301-803 3206 7)
(W) (VA) (mA) (mA)
Group 13C 12,1 – 504 – – IP 65 -25 … +60 DIN EN 175301-803 0200 7)

Group 13C – 11,3 – 49 – IP 65 -25 … +60 DIN EN 175301-803 3204 7)
Group 13C 8,9 – 369 – II2G 2) Ex e mb IIC T5: -40 … +55 M20 x 1,5 6) 4220 8)
381
T4/T5 Gb
Group 13C II2D Ex tb IIIC T4: -40 … +65 M20 x 1,5 6) 4220 8)
T 130°C Db IP66 2) 10)
(W) (VA) (mA) (mA)
Group 13D 16,9 – 703 – – IP 65 -25 … +60 DIN EN 175301-803 0700 7)

Group 13D – 19,5 – 75 – IP 65 -25 … +60 DIN EN 175301-803 3703 7)
Group 13D 11,4 – 475 – II2G Ex e mb IIC T5: -40 … +40 M20 x 1,5 6) 4230 8)
T4/T5 Gb 2) 10)
Group 13D II2D Ex tb IIIC T5: -40 … +50 M20 x 1,5 6) 4230 8)
T 130°C Db IP66

+34 986 288118
SOLENOID OPERATORS
3 95000 & 96000 Poppet Valves
VALVES
(W) (VA) (mA) (mA)
Group 16C 6,8 – 284 – – IP 65 -25 … +60 DIN EN 175301-803 0827 7)

Group 16C – 10,6 – 46 – IP 65 -25 … +60 DIN EN 175301-803 3805 7)
(W) (VA) (mA) (mA)
Group 16D 16,9 – 703 – – IP00 without plug 5) -25 … +60 DIN EN 175301-803 0800 7)
IP65 with plug 5) Form A 6)
Group 16D – 17,3 – 75 – IP00 without plug 5) -25 … +60 DIN EN 175301-803 3803 7)
Standard voltages 24 V d.c., 230 V a.c. Other voltages on request.

Design acc. to VDE 0580, EN 50014/50028. 100% duty cycle.
2) Category II 2 GD, EC-Type Examination Certificate KEMA 98 ATEX 4452 X.
5) Required connector type 0570275.
6) Connector/cable gland not supplied, see ‘Accessories’ table.
382
7) Suitable for outdoor installation only if equipped with a special protection (e.g. cubicle installation).
8) This solenoid has a fuse with an appropriate rating.
10) IEC Ex Certificate of Conformity IEC Ex KEM 09.0068.
Accessories
Cable glands Connectors
Protection class EEx e, EEx d (ATEX),
Ms nickel plated brass
EEx e 0588819000000000 0570275000000000

(for solenoid 42xx /46xx M20 x 1,5)

+34 986 288118

24011 5 mm orifice (ND) 3/2, Universal, G1/4, 1/4 NPT, flange with NAMUR interface 3
• Main application: single
VALVES
operated process actuators
• TÜV-approval based on IEC 61 Medium: Valve body, trim, coil housing and
508, DIN V 19 251. Approvals: Neutral or aggressive gaseous or top cover:
DIN EN 161/3394 DVGW, liquid fluids. Fluid viscosity up to 40 stainless steel 1.4404 (316 L)
group Rm and EN 13611
centistokes. O-rings seats & seals:
Compressed air, filtered, non-lubricated high NBR
• Standard NAMUR type manifold and dry.
system for easy assembly Body:
Flow: Aluminium anodized
• Rest position in the event of 340 l/min (suitable for high humidity, sulphuric,
power failure provided by
Flow direction: sodium chloride or ammonia
mechanical return spring
Optional environments), brass 2.0401 (Ms 58)
• Solenoids include ATEX versions or stainless steel 1.4404 (316 L)
Mounting position:
• Suitable for outdoor use Optional, preferably vertical
under critical environment
Media temperature:
conditions (see solenoid list)
-25°C … +80°C NBR,
-10°C … +120°C FPM
water up to +95°C,
-40°C … +60°C VMQ
For temperatures below 0°C use conditioned dry air.
If installed outdoors protect all connections against the
Dimensions
383
1 Valves with threaded connection 2 Valves with NAMUR interface
43 50
46
46
98
M5
13,5
1 3
117,5
37,5
2
51
12
1
24
52
3
24
5,5
2
6,5
5,5 30
27 7,5 6,5 32 50
55
Models – Valves with threaded connection – Brass valves

Model Voltage Port size Operating Materials Manual Solenoid group Dimension Test certificate
pressure (bar) seat seal override No. IEC 61 508
2401103080002400 24 V d.c. G1/4 0 … 10 NBR – A 1 •

2401103380323050 230 V a.c.
2401103426002400 24 V d.c. G1/4 0 … 10 NBR – B 1 •
2401103426123050 230 V a.c.
2401103466002400 24 V d.c. G1/4 0 … 10 NBR – B 1 •
2401126080002400 24 V d.c. G1/4 0 … 10 FPM – A 1 •
2401126380323050 230 V a.c.
2401126426002400 24 V d.c. G1/4 0 … 10 FPM – B 1 •
Models – Valves with threaded connection –

Stainless steel valves (1,4404/316l) for aggressive environment
Model Voltage Port size Operating Materials Manual Solenoid group Dimension Test certificate
pressure (bar) seat seal override No. IEC 61 508
2401147080002400 24 V d.c. 1/4 NPT 0 … 10 FKM – A 1
2401147380323050 230 V a.c.

+34 986 288118

3 24011 5 mm orifice (ND) 3/2, Universal, G1/4, 1/4 NPT, flange with NAMUR interface
Models – Valves with namur interface – Aluminium valves anodized

VALVES
Model Voltage Port size Operating Materials Manual override Solenoid group Dimension Test certificate
pressure (bar) seat seal No. IEC 61 508**
2401109080002400 24 V d.c. G1/4 0 … 10 NBR Add-on A 2 •
2401109380323050 230 V a.c.
2401109426002400 24 V d.c. G1/4 0 … 10 NBR Add-on B 2 •
2401109426123050 230 V a.c.
** Certificate not included with valve and should be ordered separately- part number 0695241000000000
Approval S 137/01, SIL 4 for low demand mode, SIL 3 for high demand mode, Approval S 83/96, AK 7 (request from manufacturer)
Particulary for valves with TÜV approval and installation in plants, based on safety standards DIN V 19250, IEC 61511, taking into account Maintenance instruction document 7503444.
The responsibility for the maintenance and repair of the solenoid valves lies with the users or the supervisory authority for these process systems.
Group A solenoid details

Power Consumption Voltage Protection Protection Temperatures °C Electrical Solenoid
24 V d.c. 230 V a.c. 24 V d.c. 230 V a.c. category class ambient/fluid connection code
(W) (VA) (mA) (mA)
16,9 – 703 – – IP00 without plug 5) -25 … +60 DIN EN175301-803 0800 7)
– 19,5 – 75 – IP00 without plug 5) -25 … +60 DIN EN175301-803 3803 7)
384
Group B solenoid details

Power Consumption Voltage Protection Protection Temperatures °C Electrical Solenoid
24 V d.c. 230 V a.c. 24 V d.c. 230 V a.c. category class ambient/fluid connection code
(W) (VA) (mA) (mA)
3,9 – 162 – II2G Ex e mb IIC T4/T6 Gb T4: -40 … +80 M20 x 1,5 6) 4260 8)
II2D Ex tb IIIC T 130°C Db IP66 *2), *10) T6: -40 … +55
– 5,3 – 23 II2G Ex e mb IIC T4/T6 Gb T4: -40 … +80 M20 x 1,5 6) 4261 8)
II2D Ex tb IIIC T 130°C Db IP66 *2), *10) T6: -40 … +55
3,9 – 162 – II2G Ex d mb IIC T4/T6 Gb T4: -40 … +80 1/2 NPT 6) 4660 8)
II2D Ex e mb IIC T4/T6 Gb T6: -40 … +55
Ex tb IIIC T130°C Db *3)
Standard voltages 24 V d.c., 230 V a.c. Other voltages on request. Design acc. to VDE 0580, EN 6) Connector/cable gland not supplied, see ‘Accessories’ table.
50014/50028. 100% duty cycle. 7) Suitable for outdoor installation only if equipped with a special protection (e.g. cubicle installation).
2) Category II 2 GD, EC-Type Examination Certificate KEMA 98 ATEX 4452 X. 8) This solenoid has a fuse with an appropriate rating.
3) Category II 2 GD, EC-Type Examination Certificate PTB 02 ATEX 2085 X. 10) IEC Ex Certificate of Conformity IEC Ex KEM 09.0068.
5) Required connector for d.c. type 0570275. Connector with rectifier for a.c. or universal current: type
0663303.
Accessories Options
Cable glands Connectors Connectors Silencer • Push only manual overide
Protection class EEx e, EEx d d.c. a.c. • Semi automatic manual overide
(ATEX), Ms nickel plated brass
• Turm & lock maual overide
• Additional ATEX coils
• IECEx approved coils
EEx e 0588819000000000 0570275000000000 0663303000000000 M/S2 (G1/8)*

(for solenoid 42xx /46xx M20 x 1,5) with rectifier
EEx e 0588925000000000
(for solenoid 42xx / 46xx 1/2” NPT )
* For indoor use.

+34 986 288118
g i n e e red.
io n. En
Precis
Delivering quality solutions

for high pressure
applications
For over 60 years, IMI Precision Engineering has provided
expertise in high pressure products and solutions for a
number of industries including Rail, Commercial Vehicle,
CNG, Defence, Oil & Gas and Industrial Gases; with
products capable of managing pressures up to 1000 bar.
We are expert at designing for the precise needs of many high pressure appliations: Engineering
> 1/8” to 5” ports GREAT Solutions
> Industrial gases including N2, O2, Ar, Kr, CH4, H2, He, CO2, CO, N20, etc.
> Natural Gas
> Hydraulic Fluids including water glycol, hydraulic oil, seawater, kerosene, etc
> Temperature from -55ºC to +300ºC
> Regulator Cv range: 0.08 - 83

+34 986 288118
IN-LINE FLOW REGULATORS (BLOCK FORM)

3 C00GE and C00GP Uni-directional – Ø 4 … 12
• High flow performance

VALVES
• In-line or panel mounting

Medium: Body:
• Adjustment can be locked
Compressed air, filtered, PBT
• Captive regulator needle will not lubricated and non-lubricated Seals:
blow out when unscrewed Operating pressure: NBR (silicone free) u-packing and O-rings
• Nickel plated brass components 10 bar max. Threaded bodies:
provide corrosion and contamination Ambient temperature: Nickel plated brass
resistance and an extended life 0°C … +60°C Release sleeve and backing ring:
at temperatures below +2°C POM
Tube sizes: Grab-ring:
4 … 12 mm Stainless steel
Tubing types: Collar:
Nylon 11 or 12, Polyurethane Nickel plated brass
85, 95 or 98 durometer
386
Models – In-line flow control

Model ØA B C C1 D E ØK N
min. max.
C
E
D
C00GE0400 4 12 45 30 33 3,3 15 11 13,5

C1
1 2
øA
øK
C00GE0600 6 16 50 35 39,5 4,4 20,5 13 17,5 N
C00GE0800 8 19 55,5 37,5 42 4,4 23 15 20 B
C00GE1000 10 23 61 44 49 4,4 28 17,5 23

C00GE1200 12 26,5 70 47,5 53,5 4,4 32 20,5 25,5
Models – In-line and panel mounting flow control

Model ØA B C C1 C2 D E ØK N Panel Panel
min. max. hole thickness
C
E
D
C1
C2
C00GP0400 4 12 42 35,5 38 5,5 3,2 15,5 11 13,5 12 11 5

1 2
øA
øK
N
C00GP0600 6 16 49,5 43 48,5 8 4,3 20,5 13 17,5 17 16 6

B
C00GP0800 8 19 56,5 47,5 53 8,5 4,3 23 15 20 19 17 6
C00GP1000 10 23 63 53,5 61,5 10,5 4,3 27,5 17,5 23 22 17 7
C00GP1200 12 26,5 73,5 57,5 64,5 12 4,4 32,5 20,5 25,5 24 21 7

+34 986 288118
BLOCK FORM FLOW REGULATORS

T1000 and T1100 Uni-directional (T1000) – M5, G1/8 … G1/2 Bi-directional (T1100) – G1/8 … G1/2 3
• Compact size/low weight/
VALVES
in-line units
• High flow performance Medium: Body:
Compressed air, filtered, lubricated Aluminium alloy
• Suitable for panel and wall mounting or non-lubricated, inert gases Seals:
• Two way flow control (T1100 series) Operating pressure: Nitrile
• Adjustment can be locked 1 … 10 bar (T1000 series G1/8 … G1/2) Needle and internal parts:
• Captive regulator needle will not 0,3 … 10 bar (T1000 series M5) Brass
blow out when unscrewed 0 … 10 bar (T1100 series)
External parts:
• Adjusting knob position line Ambient temperature: Aluminium alloy
-20°C … +80°C
387
Dimensions
G
Model A B C D F G ØH J K L L
T1000M0500 M5 25 15 45 12 18 4,5 12 5,5 M10 x 0,75 12 1
T1000C1800 G1/8 34 20 51 16,5 24 4,5 16 8 M12 x 1 14

T1000C2800 G1/4 45 25,5 61,5 21 32 4,5 19 9,5 M14 x 1 17
D
øH
T1000C3800 G3/8 58 32,5 78,5 27 43 4,5 28 13 M20 x 1 24
T1000C4800 G1/2 65 36 82 30,5 50 4,5 30 15 M20 x 1 24
C
F
T1100C1800 G1/8 34 20 51 16,5 24 4,5 16 8 M12 x 1 14

B A
T1100C2800 G1/4 45 25,4 61,5 20,8 32 4,5 19 9,5 M12 x 1 17 J
T1100C4800 G1/2 65 36 82 30,5 50 6,5 30 15 M20 x 1 24
Models
Model Port size Max. regulated flow factor Free flow factor Opening pressure Minimum operating pressure
(bar) (bar)
C* CV C* CV
T1000M0500 M5 0,28 0,07 0,28 0,07 0,3 0,3
T1000C1800 G1/8 0,57 0,14 1,50 0,37 <0,1 1
T1000C2800 G1/4 1,30 0,32 2,80 0,69 <0,1 1
T1000C3800 G3/8 4,80 1,17 6,70 1,64 <0,1 1
T1000C4800 G1/2 7,50 1,84 8,30 2,00 <0,1 1
T1100C1800 G1/8 0,57 0,14 – – – 0
T1100C2800 G1/4 1,30 0,32 – – – 0
T1100C4800 G1/2 7,50 1,84 – – – 0
* C: measured in dm3/(s.bar).

+34 986 288118
HEAVY DUTY FLOW REGULATORS

3 M/800 In-line Uni-directional – G1/8 … G1
• Line mounted general

VALVES
purpose regulators
• Captive regulating needle will Medium: S/836, M/837, M/839
not blow out when unscrewed Compressed air, filtered, Body, adjusting knob and
lubricated and non-lubricated locking ring: brass
• Calibrated adjusting
knob, can be locked Operating pressure: M/840, M/855
0,3 … 16 bar Body, adjusting knob and
• Suitable for wall mounting locking ring: aluminium
• High operating pressure -20°C … +80°C Seals: nitrile rubber.
(Alternative models to 150°C)
Dimensions
C
G
D
2 1
I
A J
388
K
L M
Model A D max. ØG H I J K L M
S/836 G1/8 38 5,1 8,5 8 5 24,5 27,5 max. 46 13
M/837 G1/4 37,5 5,2 11 9,5 6 41 25 max. 60 17
M/839 G1/2 80 8,3 17 16 13 57 53 max. 95 28
M/840 G3/4 104 8,3 21,5 17,5 20,5 76 66 max. 118 32
M/855 G1 147 13 26 24 23 90 107 max. 150 48w
Models
BSPP Port size Max. regulated flow factor Free flow factor Spare kit
Model
C** CV C** CV
S/836 G1/8 0,7 0,17 2,1 0,6 QS/520/00

S/837 G1/4 2 0,49 4,3 1 QS/521/00
S/839 G1/2 12 2,9 17 4,1 QS/522/00
M/840 G3/4 18 4,4 38 9,3 QS/523/00
M/855 G1 36 8,8 45 11 QS/524/00
** C measured in dm /(s.bar).
3
Options
• High temperature version

+34 986 288118
EXHAUST FLOW REGULATOR/SILENCERS

T20 M5, G1/8 … G1/2 3
• Compact, integral flow
VALVES
regulator and silencer units
• Captive regulating needle will Medium: Body and washer:
not blow out when unscrewed Compressed air, filtered, lubricated Nylon
and non-lubricated, inert gases Silencer:
• Reduced dimensions
Operating pressure: Porous polyethylene
1 … 10 bar Adjusting screw:
Ambient temperature: High tensile zinc electroplated steel
-20°C … +80°C
Dimensions
øD
B
389
G
1 C
B
Model B C G ØD 1
T20M0500 G M5 16 5 - 1,5 8
C
T20C1800 G1/8 20,5 6 15 2,5 13
T20C2800 G1/4 29 7 18 4 15
T20C3800 G3/8 38 8 24 6 20
T20C4800 G1/2 50 10 30 8 25
Models
Model Thread Port size Max. regulated flow factor
C** CV
T20M0500 Metric M5 0,3 0,07

T20C1800 BSPP 1/8 1,6 0,4
T20C2800 BSPP 1/4 3,2 0,8
T20C3800 BSPP 3/8 6,9 1,7
T20C4800 BSPP 1/2 10 2,4
** C measured in dm3/(s.bar).

+34 986 288118
3/2 POPPET VALVE MANUAL/MECHANICAL

3 S/1340 G1/4
• Very rugged, heavy duty valves

VALVES
• Corrosion resistant
Medium: Body, poppet and lever:
• Adjustable lever operators, may
Compressed air, filtered, Brass
be rotated at 90° intervals lubricated and non-lubricated Screws and roller:
• Integral alternative ports Operation: Stainless steel
Poppet valves, directly actuated Seals:
Mounting: NBR
Through-holes in valve body
Port Size:
G1/4
Operating Pressure:
0,7 … 10 bar
Flow:
1300 l/min
+5 … +75°C
Dimensions
1 2&3
< 40
° (*5
< 32° )
(*5) 57°
<11,5
)
>7,5
° (*
5 ) (*3
52°
)
*1
14,5
390
18°
°(
90
<5° (*3)
<5° (*2) (*2)
2
(*3
)
)
(*2
1
3
45° )
(*4) (*4
45°
1 G 1/4
Models
Model Actuation Dimension No. Spares kit
S/1340/14 Plunger/Spring 1 QS/1340/6/00
S/1340/8 Roller/Spring 2 QS/1340/6/00
S/1340/48 One-way trip/spring 2 QS/1340/6/00
S/1340/8: S/1340/48:
•Pre-travel: 14˚ maximum, exhaust seat closes •Pre-travel: 19˚ maximum, exhaust seat closes
•Operating Travel: 32˚/7,5 mm minimum, including pre-travel •Operating Travel: 36˚/9,5 mm minimum, including pre-travel
•Total movement of valve including over-travel: •Total movement of valve including over-travel:
•40˚/11,5 mm maximum •40˚/10,5 mm maximum
Notes: •Minimum movement anti-clockwise to trip valve:
1. Operating lever must not be set to exceed this position at any time during operation.
•38˚ (valve does not operate)
2. Maximum rest position of operating lever for valve operating clockwise.
Notes:
3. Maximum rest position of operating lever for valve operating anti-clockwise.
1. Operating lever must not be set to exceed this position at any time during movement to operate or to trip valve.
4. Operating lever must not enter this arc at any time during operation.
2. Maximum rest position of operating lever if full amount of over-travel is required.
5. Valve may be operated either clockwise or anti-clockwise.
3. Operating lever must not enter this arc at any time during movement to trip valve.
6. Operating lever may be positioned at any angle on the operating spindle providing the conditions of
4. Operating lever must not enter this arc at any time during operation.
operation in notes 1 … 5 are maintained.
5. Valve may be operated clockwise, but does not operate anti-clockwise.
Operating mechanism may be rotated through 360˚ at 90˚ intervals.
6. Operating lever may be positioned at any angle on the operating spindle providing the conditions of operation in
notes 1 … 5 are maintained
Operating mechanism may be rotated through 360˚ at 90˚ intervals.

+34 986 288118
g i n e e red.
io n. En
Precis
IMI Maxseal
Extremely high quality
stainless steel solenoid valves
IMI Maxseal is an extremely high quality brand
of stainless steel solenoid valves, designed and
manufactured with reliability and integrity in mind.
IMI Maxseal valves have performed exceptionally well in harsh environments all
over the globe for over 50 years and are traditionally associated with offshore
oil & gas applications, but are also used onshore, particularly in coastal
environments where a fully stainless steel construction is advantageous.
Engineering
GREAT Solutions

+34 986 288118
IN-LINE EXCESS FLOW SHUT-OFF VALVES

3 T60 Air fuses G1/4 … G1 1/2
• Assists in complying with

VALVES
safety regulations
• Tamper proof Medium: Body:
Compressed air, filtered, lubricated Aluminium
• Compact and safe design and non-lubricated and inert gases Internal parts:
• Low pressure drop Operating pressure: Brass
• Automatically resets after Maximum 16 bar, minimum Spring:
failure correction according to hose length Stainless steell
• High corrosion resistance Ambient temperature:
• High air pressure rating -20°C … +80°C
Dimensions
C
E
øF
B
392
Model B C E ØF G
T60C2890 G1/4 51 3 21 11 21
T60C2891 G1/4 51 3 21 11 21
T60C3890 G3/8 62 5 24 14 24
T60C3891 G3/8 62 5 24 14 24
T60C4890 G1/2 78 5 32 15 32
T60C4891 G1/2 78 5 32 15 32
T60C6890 G3/4 90 5 32 19 32
T60C6891 G3/4 90 5 32 19 32
T60C8890 G1 118 5 51 25,5 51
T60C8891 G1 118 5 51 25,5 51
T60CB890 G1 1/2 145 5 64 25,5 64
T60CB891 G1 1/2 145 5 64 25,5 64
Models
Model Port size BSPP Drop pressure at Shut off flow rate at Flow at 7 bar ∆ P
shut off flow (bar) 7 bar (dm3/s) ±10% 0,07 bar (dm3/s)
T60C2890 1/4 0,14 8,3 6,5
T60C2891 1/4 0,3 14 6,5
T60C3890 3/8 0,14 19,4 13,5
T60C3891 3/8 0,3 32,2 13,5
T60C4890 1/2 0,14 32,2 23,2
T60C4891 1/2 0,3 48,3 23,2
T60C6890 3/4 0,14 48,3 43
T60C6891 3/4 0,3 80 43
T60C8890 1 0,14 92 68
T60C8891 1 0,3 128 68
T60CB890 1 1/2 0,14 186 145
T60CB891 1 1/2 0,3 268 145
Flow and pressure test conducted according to ISO 6358 test circuit. Mean measured flow values are provided at standard reference conditions.

+34 986 288118
NON-RETURN VALVES
T55 In-line G1/8 … G1/2 3
• Permit free flow of air in
VALVES
one direction only
• Simple, reliable design Medium: Body:
Compressed air, filtered, Aluminium
• Silicone free lubricated and non-lubricated O-ring:
• Low cracking pressure Operating pressure: Nitrile rubber
0,1 … 10 bar Valve:
Ambient temperature: POM
-20°C … +80°C Spring:
at temperatures below +2°C Stainless steel
Dimensions
C
E
B
393
Model B C E G
T55C1800 G1/8 42,5 7 7 14
T55C2800 G1/4 54 8 10 17
T55C3800 G3/8 63 9 13,5 24
T55C4800 G1/2 77 12 13,5 27
Models
BSPP Port size Flow factor
C* CV
T55C1800 1/8 2,4 0,59
T55C2800 1/4 5,5 1,35
T55C3800 3/8 9,0 2,20
T55C4800 1/2 15,0 3,70
*C: measured in dm /(s.bar).

3

+34 986 288118
NON-RETURN VALVE
3 C00GL, C01G2, C02G2, C01G3, C02G3 Ø 4 … 12, M5, G1/8 … G1/2, R1/8 … R1/4
• High flow performance

VALVES
• Nickel plated brass components

provide corrosion and contamination Medium: Tube to tube bodies:
resistance and an extended life Compressed air, filtered, Ø4 … Ø8: PBT
(C01G2, C02G2, C01G3, C02G3) lubricated and non-lubricated Ø10 … Ø12: Aluminium
• Pre applied thread sealant on Operating pressure: Threaded bodies:
all taper threads and recessed 10 bar max. Nickel plated brass
captive O-ring on parallel threads Ambient temperature: Seals:
provides optimum rapid sealing 0°C … +60°C NBR (silicone free) u-packing and O-rings
(C01G2, C02G2, C01G3, C02G3) Air supply must be dry enough to avoid ice formation
at temperatures below +2°C Release sleeve and backing ring:
POM
Tube sizes:
4 … 12 mm Grab-ring:
Stainless steel
Thread options (C01G2, C02G2,
C01G3, C02G3): Collar:
M5, 1/8, 1/4, 3/8 and 1/2 Nickel plated brass
ISO G and ISO R Thread sealant:
Tubing types: Threebond 2350Bl
Nylon 11 or 12
Polyurethane 85, 95 or 98 durometer
394
Models - taper thread Models - tube to tube

Model Model O/D Tube Thread Model Model O/D Tube
Non-return (in) Non-return (out)
C01G20418 C01G30418 4 R1/8 C00GL0400 – 4

C01G20618 C01G30618 6 R1/8 C00GL0600 – 6
C01G20828 C01G30828 8 R1/4 C00GL0800 – 8
– C00GL1000 10
– C00GL1200 12
Models - parallel thread

Model Model O/D Tube Thread
Non-return (in) Non-return (out)
C02G20405 C02G30405 4 M5
C02G20418 C02G30418 4 G1/8
C02G20618 C02G30618 6 G1/8
C02G20828 C02G30828 8 G1/4
C02G21038 C02G31038 10 G3/8
C02G21248 C02G31248 12 G1/2

+34 986 288118
NON-RETURN VALVES
T50P Ø 4 … 12mm PIF 3
• Allow free flow in one direction only
VALVES
• Simple reliable design
Medium: Body:
• Low weight
Compressed air, filtered, lubricated Aluminium
• Low cracking pressure or non-lubricated, vacuum Grab ring:
• High operating pressure Operation: Nickel plated brass
Non-return valve ‘O’-ring:
Operating pressure: NBR
-0,9 … 16 bar (-13 … 232 psi)
Cracking pressure:
0,03 … 0,05 bar (0,4 … 0,7 psi)
O/D tube:
Ø 4, 6, 8, 10, 12 mm
-20°C … +80°C max.
Tubing types:
PA 11 or 12, PUR and other plasticised
or unplasticised tubing which conforms
to the tolerances specified in BS 5409,
Part 1, 1976, light and normal duty,
DIN 73378, DIN 74234, NFE 49-100
Dimensions
395
C
øA
T
øS
1 2
øK
øK
øA
øV
T50P Collet
Model ØA C ØK ØA ØS ØT V ØK
T50P0004 4 49 11 O/D tube *1)
T50P0006 6 56,5 13 4 2,8 14 7,5 10

T50P0008 8 61 15 5 3,4 15 10 11
T50P0010 10 77,5 20 6 4,4 15,5 11 12
T50P0012 12 88,5 22 8 6 16,5 13 14
*1) Dimensions here and in the individual tables refer to the collet being in the ‘IN’ position. 10 7,6 21 14,5 17
12 9,6 24,5 18 20,5
Models
Model Ø Tube Flow factor Flow at 6 » 5 bar
(mm) C *1) b *2) Cv (dm3/min)
T50P0004 4 0,4 0,23 0,1 96
T50P0006 6 1,45 0,36 0,36 349
T50P0008 8 2,9 0,3 0,7 699
T50P0010 10 5,1 0,35 1,25 1229
T50P0012 12 8,4 0,42 2,1 2024
*1) Measured in dm3/(s.bar).

*2) b = critical pressure ratio.

+34 986 288118
HEAVY DUTY NON-RETURN VALVE

3 S/520 G1/8 … G1
• Allows free flow in one direction only

VALVES
• Simple reliable design

Medium: Body:
• High operating pressure
Compressed air, filtered, Brass
and temperature lubricated and non-lubricated Valve:
• Spares kit available Operation: Aluminium
Heavy duty non-return valves Seals:
Operating pressure: NBR
0,3 … 16 bar Note: FPM Seals for high temperature version
Cracking pressure:
< 0,1 bar (1 psi)
Port sizes:
G1/8 … G1
Mounting:
Line mounted
Standard
-20°C … +80°C max.
For high temperature applictions +150°C
Dimensions
396
C
B
Model B C B E
S/520 G1⁄8 43 1⁄8 10 14
S/521 G1⁄4 48 1⁄4 11 19
S/532 G3⁄8 62 3⁄8 13 22
S/522 G1⁄2 76 1⁄2 17 27
S/523 G3⁄4 92 3⁄4 18 36
S/524 G1 124 1 25 49
Models
Model Port size Flow factor Service kit
C *1) CV
S/520 G1/8 2,4 0,6 QS/520/00
S/521 G1/4 4,3 1 QS/521/00
S/532 G3/8 10,5 2,6 QS/532/00
S/522 G1/2 17 4,2 QS/522/00
S/523 G3/4 42 10,3 QS/523/00
S/524 G1 55,5 13,6 QS/524/00
**1) Measured in dm /(s.bar) *2) Measured in m /h.

3 3
Options
• High temperature versions

+34 986 288118
SHUTTLE VALVE
T65 G1/8 & G1/4 3
• Allow two independent signal
VALVES
sources to be connected
to a common pilot line Medium: Body:
• Can be used to perform Compressed air, filtered, lubricated Zinc alloy
an ‘OR’ logic function or non-lubricated, inert gas Ball:
• Can be combined to operate Operation: NBR
from three or more sources Shuttle valve (‘OR’ logic function) Valve seat:
• Valves can be ganged together Operating pressure: Brass
0,7 … 10 bar
Port size:
G 1/8, G 1/4
Mounting:
Line mounted
-20°C … +80°C max.
397
Dimensions
G
øH
2
K
L
1 1
A
F
Model Port size Flow factor Flow at 6 - 1 bar

C *1) Cv (dm3/min)
T65C1800 G 1/8 1,7 0,42 412
T65C2800 G 1/4 2,6 0,64 631
*1) Measured in dm3/(s.bar).
Models
Model A F ØH K L M N
T65C1800 G1/8 15 5,25 6 10 25 36
T65C2800 G1/4 20 5,25 8 12 30 50

+34 986 288118
BLOCKING VALVE
3 102GA, 102GH 4 … 10 mm, G1/8 … G1/2
• Very compact units

VALVES
• Positive tube anchorage

Medium: Body and banjo bolt:
• Safer pneumatic systems
Compressed air Nickel plated brass
Operating pressure: Washer:
1 … 10 bar NBR and PUR
Tube size:
4, 6, 8, 10 mm
Tube types:
PA 11 or 12, PU and other
plasticised or unplasticised tubing
-20°C … +80°C
398
Models – Push-in and thread ports

Model Port size 1 Port size 2 Pilot port Pilot pressure
(mm) (bar)
102GA0418 4 G1⁄8 M5 2,5
102GA0618 6 G1⁄8 M5 2,5
102GA0628 6 G1⁄4 M5 2,5
102GA0828 8 G1⁄4 M5 2,5
102GA0838 8 G3⁄8 M5 3
102GA1038 10 G3⁄8 M5 3
102GA1248 12 G1⁄2 M5 2,5
Models – Thread ports only

Model Port size 1 Port size 2 Pilot port Pilot pressure
(bar)
102GA1818 G1⁄8 G1⁄8 M5 2,5
102GA1828 G1⁄8 G1⁄4 M5 2,5
102GA2828 G1⁄4 G1⁄4 M5 2,5
102GA3838 G3⁄8 G3⁄8 M5 3
102GA4848 G1⁄2 G1⁄2 M5 2,5
102GH2828X2 G1⁄4 G1⁄4 G1/8 2,5
102GH3838X2 G3⁄8 G3⁄8 G1/8 3
102GH4848X2 G1⁄2 G1⁄2 G1/8 2,5

+34 986 288118
BLOCKING VALVE
102GA, 102GH 4 … 10 mm, G1/8 … G1/2
3
Dimensions
VALVES
Push-in fitting x BSPP thread
Model ØA B C C1 E G 1
12 102GA0418 4 G1/8 41 20 22 6 13 16
E
M5 102GA0618 6 G1/8 41 20 23 6 13 16
102GA0628 6 G1/4 48 26 25 10,5 17 20
øA
1 102GA0828 8 G1/4 48 26 26 10,5 17 20

1
102GA0838 8 G3/8 55 29 28 10,8 22 24
C
C1
102GA1038 10 G3/8 55 29 32,5 10,8 22 24

G
B 102GA1248 12 G1/2 65,5 36 39,5 12,8 27 30

2
BSPP thread x BSPP thread

Model ØA B / B1 C C1 E G 1
12 102GA0418 4 G1/8 41 20 22 6 13 16
E
M5 102GA0618 6 G1/8 41 20 23 6 13 16
102GA0628 6 G1/4 48 26 25 10,5 17 20
1 102GA0828 8 G1/4 48 26 26 10,5 17 20
1
B1
102GA0838 8 G3/8 55 29 28 10,8 22 24

C
C1
102GA1038 10 G3/8 55 29 32,5 10,8 22 24

G
B
102GA1248 12 G1/2 65,5 36 39,5 12,8 27 30
399
2
BSPP thread x BSPP thread and manual override

1
E 3
12 Model B B1 C C1 C2 E G +1 2+3
B1
2
102GH2828X2 G1/4 G1/8 80 26 64,5 24,5 10,5 20 / 17 13 / 13
1 102GH3838X2 G3/8 G1/8 87 29 74,5 27 10,5 24 / 22 17 / 13
C
C2
1 102GH4848X2 G1/2 G1/8 97 36 84,5 34 12,5 30 / 27 17 / 13

B
C1
G
Collet
ØA ØS Ø T *1) V ØK
O/D tube
T
4 2,8 14 7,5 10
øS
6 4,4 15,5 11 12
8 6 16,5 13 14
øK
øA
øV
10 7,6 21 14,5 17
12 9,6 24,5 18 20,5
*1) Dimensions here and in the individual tables refer to the collet being in the ‘IN’ position.

+34 986 288118
PRESSURE REDUCING VALVE

3 102GB 4 … 10 mm, G1/8 … G1/2
• Compact units
VALVES
• System running cost savings by

optimising cylinder pressure Medium: Body and banjo bolt:
Compressed air, filtered, Nickel plated brass
• Designed for mounting on valves lubricated and non-lubricated Washer:
• Push-in or threaded ports available Operating pressure: NBR and PU
• Relief feature to protect Primary pressure 1 … 10 bar max.
against over pressure
Secondary pressure 1 … 8 bar max.
-20°C … +80°C
Dimensions
Push-in fitting x BSPP thread BSPP thread x BSPP thread
E E
3 3
2 2
øA
1 1
C
B1
2 2
C
400
C1
C1
G
G
B B
1 1
Model ØA B C C1 E G +1 2+3 Model B B1 C C1 E G +1 2+3

102GB0418 4 G1/8 73 20 22 6 13 / 16 11 / 5 102GB1818 G1/8 G1/8 73 20 17,5 6 13 / 16 11 / 5
102GB0628 6 G1/4 81 26 25 10,5 17 / 20 13 / 5 102GB2828 G1/4 G1/4 81 26 24,5 10,5 17 / 20 13 / 5
102GB0828 8 G1/4 81 26 26 10,5 17 / 20 13 / 5 102GB4848 G1/2 G1/2 89 36 34 12,5 22 / 24 17 / 6
102GB0838 8 G3/8 86 29 28 10,8 22 / 24 17 / 6
102GB1038 10 G3/8 86 29 32,5 10,8 22 / 24 17 / 6
Collet
ØA ØS Ø T *1) V ØK
O/D tube
T
4 2,8 14 7,5 10
øS
6 4,4 15,5 11 12
øK
øA
øV
8 6 16,5 13 14
10 7,6 21 14,5 17
Models – Push-in fitting on port 1 Models – Thread on port 1

Model O/D tube 1 Port size 2 Model Port size Port size
(mm) 1 2
102GB0418 4 G1⁄8 102GB1818 G1⁄8 G1⁄8
102GB0628 6 G1⁄4 102GB2828 G1⁄4 G1⁄4
102GB0828 8 G1⁄4 102GB4848 G1⁄2 G1⁄2
102GB0838 8 G3⁄8
102GB1038 10 G3⁄8

+34 986 288118
PRESSURE SENSOR VALVE

102GD Ø 4 mm, G1/8 & G1/4 3
• Very compact units
VALVES
• Easy tube insertion for rapid
assembly of pneumatic circuits Medium: Body:
Compressed air, filtered, PA
• Positive tube anchorage lubricated and non-lubricated Banjo bolt:
• Simpler pneumatic systems Operating pressure: Nickel plated brass
• Eliminates need for 10 bar max.(cylinder pressure) Washer:
electrical reed switches 3 … 10 bar (sensor supply pressure) NBR and PU
Tube types:
Nylon 11 or 12, polyurethane and other
plasticised or unplasticised tubing
-20°C … +80°C
401
Dimensions
E
T
B
øS
2
A
C1
øK
øA
øV
C
1
A
G
102GD Collet
Model øA B C C1 E F G ØA ØS Ø T *1) V ØK
O/D tube
102GD0418 4 G1/8 25 21 45,2 9,5 5,5 15 4 2,8 14 7,5 10
102GD0428 4 G1/4 29 21 47,2 9,5 6,5 19
*1) Dimensions here and in the individual tables refer to the collet being in the ‘IN’ position.
Models
Model O/D tube 1 Port size 2
(mm)
102GD0418 4 G1/8
102GD0428 4 G1/4

+34 986 288118
QUICK EXHAUST VALVES

3 T70, S/511, S/513, S/514 G1/8 … G1/2
• Enables air to be exhausted quickly

VALVES
from air reservoirs and cylinders

• Allows higher cylinder Medium: Body & cover:
speeds to be achieved Compressed air, filtered, Zinc alloy (T70*1800 & T70*2800,
lubricated and non-lubricated S/513), aluminium alloy (T70*3800
• Simple, compact design & T70*4800, S/511, S/514)
and construction Operating pressure:
0,5 … 10 bar (T70) Seals:
• Very reliable in operation 0,7 … 10 bar (S/511) Nitrile (T70), polyurethane (S/51*)
0,7 … 7 bar (S/513, S/514) O-ring:
Ambient temperature: Nitrile
-20°C … +80°C Element:
Porous plastic (S/513, S/514)
Dimensions
T70 S/511 S/513, S/514
H E
E
B
1
F
F
3
F1
B
1 2
F1
B
B1
2
B1
C
3 1
2
402
C
F
1
B1
øH
1
E
2
Model - T70 B C E F
T70C1800 G1/8 53 28 35,5 19
T70C2800 G1/4 53 28 35,5 19
T70C3800 G3/8 73,5 40 48 30
T70C4800 G1/2 73,5 40 48 30
Model - S/511 B B1 C E F F1 1 2
S/511 G1/2 G3/4 86 100 17 48 30 36 32
Model - S/513, S/514 B B1 C E F F1 ØH 1

S/513 G1/4 G3/8 86,5 58 10 23 34 21 / 23
S/514 G1/2 G3/4 134 100 17 48 47,5 30 / 36
Models
Model Port size Flow (1 … 2)** Flow (2 … 3)** Service kit
BSPP C* Cv C* Cv
T70C1800 G1/8 3,8 0,93 7 1,72 T70C1800K00

T70C2800 G1/4 7,4 1,8 9,7 2,38 T70C2800K00
T70C3800 G3/8 14,5 3,55 20,5 5 T70C3800K00
T70C4800 G1/2 19,7 4,83 25 6,13 T70C4800K00
S/511 G1/2 21,6 5,3 39 9,56 QS/511/00
S/513 G1/4 7,6 1,86 13,5 3,3 QS/510/00
S/514 G1/2 21,6 5,3 39 9,56 QS/511/00
* C = dm3/(s.bar). ** Flow factor measured at 6 bar inlet pressure.

+34 986 288118
SOLENOID PLUGS AND CABLES

15mm, 22mm & 30mm 3
VALVES
15mm plugs according to DIN EN175301-803 form C
Connector Model Connector type Cable Voltage Features Suppression Protection Gland size Power
length a.c. d.c. class consumption
Plug with moulded V10013-D01 DIN EN175301-803 1000 mm – – – – IP 65 Pg 7 –

cable V10013-D03 DIN EN175301-803 3000 mm – – – – IP 65 Pg 7 –
Plug with cable V10027-D00 DIN EN175301-803 – – – – – IP 65 Pg 7 –

gland 0588666000000000 DIN EN175301-803 – – – – – IP 65 Pg 7 –
Indicator plug V10012-D13 DIN EN175301-803 – 12 … 24 V 12 … 24 V LED,VDR • IP 65 Pg 7 0,25W

V10012-D18 DIN EN175301-803 – 110 V 110 V LED,VDR • IP 65 Pg 7 0,25W
V10012-D19 DIN EN175301-803 – 220 V 220 V LED,VDR • IP 65 Pg 7 0,25W
Indicator plug with V10014-D01 DIN EN175301-803 1000 mm 24 V 24 V LED,VDR • IP 65 Pg 7 0,25W

moulded cable V10014-D03 DIN EN175301-803 3000 mm 24 V 24 V LED,VDR • IP 65 Pg 7 0,25W
V10015-D01 DIN EN175301-803 1000 mm 110 V 110 V LED,VDR • IP 65 Pg 7 0,25W
403
Light emitting V10037-E13 DIN EN175301-803 – 12 … 24 V 12 … 24 V Green LED • IP 65 Pg 7 0,25W
gasket V10037-E18 DIN EN175301-803 – 110 … 120 V 110 … 120 V Green LED • IP 65 Pg 7 1W
V10037-E19 DIN EN175301-803 – 220 … 240 V 220 … 240 V Green LED • IP 65 Pg 7 1W
22mm plugs according to Industrial standard or DIN EN175301-803 form B

Plug with moulded M/P43313/1 22mm Industrial std. 1000 mm – – – – IP 65 Pg 9 –

cable M/P43313/3 22mm Industrial std. 3000 mm – – – – IP 65 Pg 9 –
Plug with cable M/P19063 22mm Industrial std. – – – – – IP 65 Pg 9 –

gland 0657868000000000 22mm Industrial std. – 12 … 250 V 12 … 250 V – • IP 65 Pg 9 0,25W
0680000000000000 22mm Industrial std. – – 15 … 30V Green LED • IP 65 Pg 9 1W
0680001000000000 22mm Industrial std. – 250 V – Green LED • IP 65 Pg 9 1W
Indicator plug M/P24121/1 22mm Industrial std. – 12 … 24 V 12 … 24 V LED,VDR • IP 65 Pg 9 0,25W
M/P24121/2 22mm Industrial std. – 110 V 110 V LED,VDR • IP 65 Pg 9 0,25W
M/P24121/3 22mm Industrial std. – 220 V 220 V LED,VDR • IP 65 Pg 9 0,25W
Indicator plug with M/P43314/11 22mm Industrial std. 1000 mm 24 V 24 V LED,VDR • IP 65 Pg 9 0,25W
moulded cable M/P43314/13 22mm Industrial std. 3000 mm 24 V 24 V LED,VDR • IP 65 Pg 9 0,25W
M/P43314/21 22mm Industrial std. 1000 mm 110 V 110 V LED,VDR • IP 65 Pg 9 0,25W
Light emitting M/P40859 22mm Industrial std. – 12 … 24 V 12 … 24 V Green LED • IP 65 – 0,25W
gasket M/P40886 22mm Industrial std. – 110 … 120 V 110 … 120 V Green LED • IP 65 – 1W
M/P40860 22mm Industrial std. – 220 … 240 V 220 … 240 V Green LED • IP 65 – 1W

+34 986 288118
SOLENOID PLUGS AND CABLES

3 15mm, 22mm & 30mm
VALVES
30mm plugs according to DIN EN175301-803 form A

Plug with moulded M/P43315/1 DIN EN175301-803 1000 mm – – – – IP 65 Pg 11 –

cable M/P43315/3 DIN EN175301-803 3000 mm – – – – IP 65 Pg 11 –
Plug with cable M/P15737 DIN EN175301-803 – 250 V 300 V – – IP 65 Pg 11 –

gland M/P19117 DIN EN175301-803 – – 240 V – – IP 65 Pg 11 –
0570275000000000 DIN EN175301-803 – 250 V 300 V – – IP 65 Pg 11 –
0663303000000000 DIN EN175301-803 – 12 … 250 V 12 … 250 V – – IP 65 Pg 11 –
0570110000000000 DIN EN175301-803 – 12 … 240 V 12 … 240 V – – IP 65 Pg 11 –
Indicator plug M/P24120/1 DIN EN175301-803 – 10 … 50 V 10 … 50 V LED,VDR • IP 65 Pg 11 0,25W
M/P24120/2 DIN EN175301-803 – 70 … 115 V 70 … 115 V LED,VDR • IP 65 Pg 11 0,25W
M/P24120/3 DIN EN175301-803 – 150 … 240 V 150 … 240 V LED,VDR • IP 65 Pg 11 0,25W
Indicator plug with M/P43316/11 DIN EN175301-803 1000 mm 24 V 24 V LED,VDR • IP 65 Pg 11 0,25W

moulded cable M/P43316/13 DIN EN175301-803 3000 mm 24 V 24 V LED,VDR • IP 65 Pg 11 0,25W
M/P43316/23 DIN EN175301-803 3000 mm 110 V 110 V LED,VDR • IP 65 Pg 11 0,25W
404
Light emitting M/P40861 DIN EN175301-803 – 12 … 24 V 12 … 24 V Green LED • IP 65 Pg 11 0,25W

gasket M/P40880 DIN EN175301-803 – 110 … 120 V 110 … 120 V Green LED • IP 65 Pg 11 0,25W
M/P40862 DIN EN175301-803 – 220 … 240 V 220 … 240 V Green LED • IP 65 Pg 11 0,25W

06 Válvulas III

Uploaded by

Copyright:

Available Formats

06 Válvulas III

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

06 Válvulas III

Uploaded by

Copyright:

Available Formats

+34 986 288118

Servicio de Att. al Cliente

SOLENOID OPERATED VALVES: > Range of body and seal materials to

Polígono Industrial O Rebullón s/n. 36416 - Mos - España - [email protected]

2/2-WAY DIRECTLY OPERATED VALVES

• 2/2-way seat valves

82510 (82520) 82610 (84620)

Body Brass (CW617N) Stainless steel (1.4408)

Models - Valves normally closed Models - Valves normally open

G1/8 1,5 8251800.910x.xxxxx 0 … 25 8261803.910x.xxxxx 0 … 25 G1/4 1,5 8251001.910x.xxxxx 0 … 16 8261001.910x.xxxxx 0 … 16

Polígono Industrial O Rebullón s/n. 36416 - Mos - España - [email protected]

2/2-WAY DIRECTLY OPERATED VALVES

*1) Note: r coil only / up to +55°C ambient temperature.

82510/82610 with solenoid 9101

1 Solenoid rotatable 360°

Polígono Industrial O Rebullón s/n. 36416 - Mos - España - [email protected]

2/2-WAY FORCE LIFTED VALVES

• 2/2-way diaphragm valves

82530 (82630) 82560 (82570)

Body Brass (CW617N), PA66 Stainless steel (1.4408), PA66

Models - Valves normally closed

Voltage codes and spare coils

Further versions on request!

Polígono Industrial O Rebullón s/n. 36416 - Mos - España - [email protected]

2/2-WAY FORCE LIFTED VALVES

Model Port size B H H1 L T

8253200.8001.xxxxx G1/2 14 90 74,5 60 27 15

Model Port size B H H1 L T

8256200.8001.xxxxx G1/2 14 88,5 74,5 60 27 15

1 Solenoid rotatable 360°

Polígono Industrial O Rebullón s/n. 36416 - Mos - España - [email protected]

2/2-WAY FORCE LIFTED VALVES

• 2/2-way diaphragm valves

82540 (82640) 82590 (84490) 82090 with DVGW approval 83040

Voltage codes and spare coils

Polígono Industrial O Rebullón s/n. 36416 - Mos - España - [email protected]

2/2-WAY FORCE LIFTED VALVES

Model Port size øA H H1 L L1 T Model Port size øA H H1 L L1 T

82540/82590 with solenoid 940x (16 bar) 1 Solenoid rotatable 360°

Model Port size A H H1 L L1 T

Polígono Industrial O Rebullón s/n. 36416 - Mos - España - [email protected]

2/2-WAY FORCE LIFTED VALVES

Model Port size øA H H1 L

8209200.917x.xxxxx G1/2 44 108 94,5 67

8209400.917x.xxxxx G1 62 124 103,5 95

83040 wih Solenoid 915x (10 bar)

83040 wih Solenoid 830x (16 bar)

8304200.830x.xxxxx 15 44 96 77 157,5 130

83040 wih Solenoid 940x (16 bar)

8304600.940x.xxxxx 40 92 150 117,8 162 200

1 Solenoid rotatable 360°

Polígono Industrial O Rebullón s/n. 36416 - Mos - España - [email protected]

2/2-WAY FORCE LIFTED VALVES

86700 (86710) 86720 (86730) 86740 (86750)

Voltage codes and spare coils Options

*1) Note: A.c. with rectifier plug.

Polígono Industrial O Rebullón s/n. 36416 - Mos - España - [email protected]

2/2-WAY FORCE LIFTED VALVES

86700 with solenoid 830x

Model Port size A H H1 L L1 T