Avigilon H5a Dual Head Camera Datasheet en
Avigilon H5a Dual Head Camera Datasheet en
Avigilon H5a Dual Head Camera Datasheet en
2 x 3 MP 2 x 5 MP
This cost-effective and low profile dual-sensor camera brings enhanced security to any site by increasing coverage and
minimizing blind spots for those hard to secure areas. Built with small spaces in mind, the H5A Dual Head provides areas
such as hallways, stairwells, and corner intersections, or any application that requires the coverage of two cameras
installed in close proximity with high imaging quality, even with its small footprint. The H5A Dual Head camera’s advanced
analytic capabilities further improve situational awareness by enabling security teams to respond swiftly to potentially
critical events.
FEATURES
NEXT-GENERATION VIDEO ANALYTICS IMPROVED COVERAGE, MINIMAL BLIND SPOTS
Detects more objects with expanded object classification and Provides increased area coverage, while minimizing blind
greater accuracy for faster responses, even in crowded scenes. spots for enhanced security with a single camera installation,
for long hallways, L-shaped hallway intersections, or
stairwells to monitor both up and down staircases.
IMAGE CONTROL
Image Compression Method H.264 HDSM SmartCodec, H.265 HDSM SmartCodec, Motion JPEG
Streaming Multi-stream H.264, Multi-stream H.265, Motion JPEG
Motion Detection Pixel motion: Selectable sensitivity and threshold. Classified object detection
Camera Tamper Detection Yes, when analytics are enabled
Electronic Shutter Control Automatic, Manual (1/7.5 to 1/8000 sec)
Iris Control N/A
Day/Night Control Automatic, Manual
Flicker Control 50 Hz, 60 Hz
White Balance Automatic, Manual
Backlight Compensation Adjustable
Privacy Zones Up to 64 zones
NETWORK
Network 100BASE-TX, RJ45 Connector, CAT5e Cabling
ONVIF ONVIF compliance version Profile S, Profile T, Profile G, and Profile M (www.onvif.org)
Security Password protection, HTTPS encryption, digest authentication, WS authentication, user access log, 802.1x port based
authentication, FIPS 140-2 L1 (with optional camera license)
Protocols IPv6, IPv4, HTTP, HTTPS, SOAP, DNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMPv2, ICMP, DHCP, Zeroconf, ARP, HSTS
Streaming Protocols RTP/UDP, RTP/UDP multicast, RTP/RTSP/TCP, RTP/RTSP/HTTP/TCP, RTP/RTSP/HTTPS/TCP, HTTP
Device Management Protocols SNMP v2c, SNMP v3
[email protected] | avigilon.com 2
PERIPHERALS
USB Port USB 2.0
Onboard Storage 2 x microSD/microSDHC/microSDXC slots – video speed class card required. Class V10 or better recommended.
AUXILIARY I/O
Audio Compression Method Opus, G.711 PCM 8 kHz
Audio Input/Output Line level input and output
External I/O Terminals Alarm In, Alarm Out
ELECTRICAL
Power Consumption 13 W max
Power Source PoE: IEEE802.3af Class 3 compliant
RTC Backup Battery 3V manganese lithium
Memory 2 GB RAM, 512 MB Flash
ENVIRONMENTAL
Operating Temperature -30 °C to +60 °C (-22 °F to 140 °F), in enclosed space
-30 °C to +65 °C (-22 °F to 149 °F), with ambient convection
Cold start delay of up to 10 min at -30 °C (-22 °F). Camera may restart during startup delay
IR Illuminator Behavior IR illuminator will turn off if the temperature is 55 °C (131 °F) or higher. The illuminator will operate at 50% power if the
temperature is between 45 °C (113 °F) and 54 °C (129 °F).
The illuminator will operate at 50% power if the temperature is below -25 °C (-13 °F), with ambient convection.
Storage Temperature -10 °C to +70 °C (14 °F to 158 °F)
Humidity 0 - 95% non-condensing
CERTIFICATIONS
Certifications/Directives UL, cUL, CE, UKCA, ROHS, REACH, RCM, KC, EAC, BIS, NOM
Safety UL 62368-1, CSA 62368-1, IEC/EN 62368-1, IEC 62471
Environmental UL/CSA/IEC 60950-22, IEC 62262 IK10 Impact Rating
IEC 60529 IP66 and IP67 Weather Rating (H5DH-DO1-IR models only)
Electromagnetic Emissions FCC Part 15 Subpart B Class B, IC ICES-003 Class B, EN 55032 Class B, EN 61000-6-3, EN 61000-3-2, EN 61000-3-3, EN
50121-4
Electromagnetic Immunity EN 55035, EN 61000-6-1, EN 50130-4, EN 50121-4
[email protected] | avigilon.com 3
ANALYTICS SPECIFICATIONS
SUPPORTED ANALYTICS EVENTS
Objects in Area The event is triggered when the selected object type moves into the region of interest.
Object Loitering The event is triggered when the selected object type moves into the region of interest and then stays for an extended amount of time.
The event is triggered when the specified number of objects have crossed the directional beam that is configured over the camera’s
Objects Crossing Beam
field of view. The beam can be unidirectional or bidirectional.
Object Appears or Enters Area The event is triggered by each object that enters the region of interest. This event can be used to count objects.
Object Not Present in Area The event is triggered when no objects are present in the region of interest.
Objects Enter Area The event is triggered when the specified number of objects have entered the region of interest.
Objects Leave Area The event is triggered when the specified number of objects have left the region of interest.
Object Stops in Area The event is triggered when an object moves into a region of interest and then stops moving for the specified threshold time.
Direction Violated The event is triggered when an object moves in the prohibited direction of travel.
Tamper Detection The event is triggered when the scene unexpectedly changes.
TEACH BY EXAMPLE
Teach By Example Yes, when used with Avigilon Control Center™
[email protected] | avigilon.com 4
OUTLINE DIMENSIONS
DUAL HEAD SURFACE MOUNT CAMERA [X.X] INCHES
(H5DH-D1-IR/H5DH-DO1-IR) X MM
[email protected] | avigilon.com 5
DUAL HEAD PENDANT MOUNT CAMERA [X.X] INCHES
(H5DH-D1-IR/H5DH-DO1-IR WITH H5DH-MT-NPTA1 ADAPTER AND CM-MT-WALL1 WALL ARM) X MM
[email protected] | avigilon.com 6
ORDERING INFORMATION
MP WDR ANALYTICS LENS IP66/IP67 IR LEDS
6.0C-H5DH-D1-IR (Discontinued) 2 × 3.0 ✓ ✓ 3.35 - 7.0 mm ✓
SUPPORT
Learn more and find additional documentation at avigilon.com or email [email protected] for specific product support.