Notes - Magnetism and Matter

1.
The Magnetic Field Lines

 Magnetic field lines form continuous closed curves.Magnetic field lines have no
source or sink.
 The tangent drawn at any point on field line represents direction of the field at that
point. Field lines never intersect to each other.
 At any place crowded lines represents stronger field while distant lines represent
weaker field.
 In any region, if field lines are equidistant and straight the field is uniform otherwise
not.
2. Bar Magnet
Magnetic dipole consists of two unlike poles of equal strength separated by a distance. Bar
magnet is an example of a magnetic dipole.
Properties of a bar magnet:
 A freely suspended bar magnet will always point towards the North- South Direction.
 Like magnetic poles repel and unlike ones attract.
 Magnetic poles cannot be isolated i.e., they always exists in pair
 When a magnet is broken, each piece behave like a magnet with a pair of North and
South Pole
 The Pole strength of each pole of a magnet is equal.
2.a Dipole Moment of a Bar Magnet
The magnetic dipole moment of a bar magnet is defined as the product of its pole strength
and magneticlength.
Magnetic Moment M=qmd
where d is a vector pointing from South to North pole of the bar magnet, the magnitude
of d is equal to the magnetic length of the bar magnet.
∣d∣=2l
2.b Magnetic Length and Geometric Length

The length of the bar magnet is called geometrical length and the length between two
magnetic poles in a bar magnet is called magnetic length. Magnetic length is always slightly
smaller than geometrical length.
Geometric LengthMagnetic Length=65
2.c Magnetic Field due to a bar magnet

Magnetic field due to a bar magnet at an axial point
Baxial=4πμo(r2−l2)2Mr
Magnetic field due to a bar magnet at an equatorial point -

For a small bar magnet, l<<r,< span="" style="box-sizing: border-box;"></r,<>
Baxial=4πμo(r)3M
Bequi=−4πμo(r2+l2)3/2M
for small bar magnet, l<<r< span="" style="box-sizing: border-box;"></r<>
Bequi=−4πμo(r)3M
2.d Torque on a bar magnet in an uniform magnetic field

When a bar magnet is kept within a magnetic field, both the poles experiences equal and
opposite forces (qmB).These two equal and opposite forces constitute a couple (about
midpoint of bar magnet) tend to align the magnet in the direction of the magnetic field B
Torque experienced by the bar magnet is given by
τ=M×B=MBsinθ , where M is the magnetic dipole moment.
2.e Potential energy of a magnetic dipole in a uniform magnetic field

U=∫θ1θ2τdθ=∫θ1θ2MBsinθdθ=−MB[cosθ]θ1θ2=−M.B{cosθ2−cosθ1}
Taking final angle to be 90 degrees we can say,
U=−M.B=MBcosθ
potential energy of the bar magnet is minimum when it is aligned along the external magnetic
field and maximum when the bar magnet is aligned anti-parallel to external magnetic field.
2.f Oscillation of a freely suspended magnet -

T=2πMBI
where I: moment of inertia
3. Magnetism and Gauss's law :

The net magnetic flux through a closed surface is zero.
∮B.ds=0
This leads to conclusion that magnetic poles cannot exist separately
4. Analogy between electric and magnetic dipoles :

5. Earth's magnetic field :
1. A vertical plane passing through the geographic axis is called geographic
meridian and a great circle perpendicular to Earth's geographic axis is called
geographic equator.
2. A vertical plane passing through magnetic axis is called magnetic meridian and a
great circle perpendicular to Earth's magnetic axis is called magnetic equator.
3. The horizontal component of earth's magnetic field (BH) -It is the component of the
earth's total magnetic fieldB in the horizontal direction in the magnetic meridian.
4. The vertical component of earth's magnetic field (BV) -It is the component of the
earth's total magnetic fieldBin the vertical direction in the magnetic meridian.
5. The magnetic declination -The angle between the geographic meridian and the
magnetic meridian at a place is called the magnetic declination at that place.
6. The angle subtended by the Earth's total magnetic field B with the horizontal direction
in the magnetic meridian is called dip or magnetic inclination (I) at that point.
Horizontal Component: BH=Bcos I
Vertical Component: BV=Bsin I
tan I=BHBV
B=BH2+BV2
6. Important terms associated with Magnetism :
Magnetisation:
Each electron in an atom has a magnetic dipole moment associated with it. In a bulk medium,
net magnetic moment arises from vector addition of moments of all atoms. Magnetisation is
defined as magnetic moment per unit volume
M=Vmnet
Units: A/m
Magnetising Field
The magnetic field which is used to magnetize a sample or specimen is called the
magnetising field. Magnetising field is a vector quantity and is denoted by H and its unit is
the same as that of magnetisation, A/m.
Magnetic Permeability
The magnetic permeability is the measure of ability of a material to allow the passage of
magnetic field lines
through it. In free space, the permeability (or absolute permeability) is denoted by μo and for
any other medium it is denoted by μ.The relative permeability μr is defined as the ratio
between absolute permeability of the medium to the permeability of free space.
μr=μoμ
Magnetic induction
The total magnetic induction (total magnetic field) inside the specimen B is equal to the sum
of the magnetic field Bo produced in vacuum due to the magnetising field and the magnetic
fieldBmdue to the induced magnetism of the substance.
B=Bo+Bm
B=μo(H+M)
Magnetic susceptibility
Magnetic susceptibility measures how easily and how strongly a material can be magnetised.
It is defined as the ratio of the intensity of magnetisation(M) induced in the material to the
magnetising field H. It is a dimensionless quantity
χ=∣H∣∣M∣
7. Classification of Magnetic materials :

Diamagnetic substances
 Magnetic susceptibility is negative.
 Relative permeability is slightly less than unity.
 The magnetic field lines are repelled or expelled by diamagnetic materials when
placed in a magnetic field.
 When placed in a non-uniform magnetic field, diamagnetic materials from stronger
part to weaker part of the external field.
 Susceptibility is nearly temperature independent.
Paramagnetic substances
 Magnetic susceptibility is positive and small.
 Relative permeability is greater than unity.
 The magnetic field lines are attracted into the paramagnetic materials when placed in
a magnetic field.
 When placed in a non-uniform magnetic field, the paramagnetic materials will have a
tendency to move from weaker to stronger part of the field.
 Susceptibility is inversely proportional to temperature.
Curie's Law
When temperature is increased, thermal vibration upsets the alignment of magnetic dipole
moments. Therefore, the magnetic susceptibility decreases with increase in temperature.
χ=TC where C is Curie's temperature
Ferromagnetic substances
 Magnetic susceptibility is positive and large.
 Relative permeability is large.
 The magnetic field lines are strongly attracted into the ferromagnetic materials when
placed in a magnetic field.
 When placed in a non-uniform magnetic field, the ferromagnetic materials will have a
strong tendency to move from weaker to stronger part of the field.
 Susceptibility is inversely proportional to temperature.
Curie-Weiss law
As temperature increases, the ferromagnetism decreases due to the increased thermal
agitation of the atomic dipoles. At a particular temperature, ferromagnetic material becomes
paramagnetic. This temperature is known
as Curie temperature TC
χ=T−TCC
8. Hysteresis :
The word hysteresis means lagging behind. The phenomenon of lagging of intensity of
magnetization (M) behind magnetic intensity (H), when a specimen of magnetic material is
subjected to a cycle of magnetization is called hysteresis.
Retentivity
It is also known as residual magnetism or remanence which is the magnetic induction left
behind in the sample after the magnetizing field has been removed.
Coercivity
Coercivity is defined as the minimum value of magnetising intensity that is required to bring
the material to its original state.
Permanent Magnets and Electromagnets

Substances which at room temperature retain their ferromagnetic property for a long period
of time are called permanent magnets. The material should have high retentivity so that the
magnet is strong and high coercivity so that the magnetisation is not erased by stray magnetic
fields, temperature fluctuations or minor mechanical damage.
Core of electromagnets are made of ferromagnetic materials which have high permeability
and low retentivity. Soft iron is a suitable material for electromagnets.

Notes - Magnetism and Matter

Uploaded by

Copyright:

Available Formats

Notes - Magnetism and Matter

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Notes - Magnetism and Matter

Uploaded by

Copyright:

Available Formats

1.

The Magnetic Field Lines

2.b Magnetic Length and Geometric Length

2.c Magnetic Field due to a bar magnet

Magnetic field due to a bar magnet at an equatorial point -

2.d Torque on a bar magnet in an uniform magnetic field

2.e Potential energy of a magnetic dipole in a uniform magnetic field

2.f Oscillation of a freely suspended magnet -

3. Magnetism and Gauss's law :

4. Analogy between electric and magnetic dipoles :

Horizontal Component: BH=Bcos I

Vertical Component: BV=Bsin I

7. Classification of Magnetic materials :

Permanent Magnets and Electromagnets

You might also like