Scribd
Upload
807 views4 pages

Swimming Pool Calculation

The document provides calculations for the design of a swimming pool and kid pool. It calculates the volume, area, number of bathers, and flow rates for both pools. It then sizes the filters, balancing tanks, pumps, heating system, and chemical dosing pumps needed based on the calculated values.

Uploaded by

Akhil Vijai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
807 views4 pages

Swimming Pool Calculation

The document provides calculations for the design of a swimming pool and kid pool. It calculates the volume, area, number of bathers, and flow rates for both pools. It then sizes the filters, balancing tanks, pumps, heating system, and chemical dosing pumps needed based on the calculated values.

Uploaded by

Akhil Vijai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Swimming Pool Calculation

Area of swimming pool = 62m2.


Depth of swimming pool = 1.6m.
Volume = 62 * 1.6 = 99.2m3.
Length of overflow edge L = (10 + 6.2 + (2 * 0.35) ) * 2 = 34 m
using DIN 19643-1 : 1997-04.
Water area per person = 4.5 m2.
K : Load capacity factor  0.6 1 .
m3
A 1 62 1 3
Flow = *  *  32 m
4.5 K 4.5 0.6 hr .

Filters:

Choose two filters swim quip HRP 24 High- rate sand filters each of area = 3.1
ft2 = 0.288m2.

Water balancing tank


V = Vv + Vw + VR
Vv = volume of water displaced by bathers = 0.075 m3 Bathers
Area 62
No. of Bathers =   13.8  14
Area of Bather 4.5
Vv = 0.075 * 14 = 1.05m3.
VR = Water volume for backwashing  6 AF where AF filter Area.
VR = 6 * 0.288 = 1.728 m2.
For two filters = 2 * 1.728 = 3.456 m3.
Q
Vw=volume of water expelled by waves. Vw  0.052 * A * 10 0.144 L

23
Vw  0.052 * 62 * 10 0.144* 34

= 2.58m3

total balancing tank volume = Vv + VR + VW


= 1.05 + 1.728 + 2.58
= 7.08m3
Take it as 7.5m3

Make up water = 30L/bather/day


= 30 * 1.4 /hr = 420L/hr
= 0.117L/S
Pool Heating:

It is recommended to warm up pool water with 0.250C/hr gradient, hence.


1
Q  0.25 * 99.2 * 1000.4.186 *
3600
= 28.8KW.

Select calorex H/C model 4022   10 KW electric with maximum flow of
110 L  1.83L
min s main pipe 3ً UPVC.

Inlets ( side wall) of over flow:

Using DIN 19643-11997-04


Inlets shall be arranged with their spacing not exceeding one-third of the pool
width.
Pool maximum width = 6m.
1/3 of width = 2m
using 5 inlets
23 4.6m 3
flow at inlet =   1.28 L use 1 1 connection inlet Certikin
5 hr s 4
CK5015 .
1
use 50% of flow for overflow outlets (8 outlet) = 23/8 = 1.44m3/hr = 0.4L/s.
2
Use 1ً connection outlet.

Kid Pool:

Use pools for non swimmer.


Area = 7.07m2.
Depth = 0.6m.
Volume = 4.24m3.
Pool perimeter = 9.42m.
Using DIN 19643-1:1997-04.
Water area per person = 2.7m2.
0.37 * 7.07
Flow required = = 4.4m3/hr = 1.2L/s.
0.6

Filter:

Choose filter swim Quip HRS 16 with 21GPM Area of filter = 1.4ft2 = 16ً =
0.13m2.
Balance Tank:

Vv = 0.075 * No of person
7.07
= 0.075 * =0.225m3.
2 .7
VR  6AF.
= 6 * 0.13 = 0.78m3.
Q
Vw = Vw  0.052 * A * 10 0.144 L

4.4
= 0.052 * 7.07 * 10 0.144* 9.42

= 0.32m3.

Balance tank volume = 0.225 + 0.78 +0.32


= 1.32m3.
take it 1.5m3

Pumps:

Swimming pool pump 6.4L/s (P-1).


Friction losses = inlet overflow ( 25 + 25 ) * 1.5 * 0.03 = 2.25m.
Static head = 3.7m
Filter = 2m

Residual pressure = 0.02 * width = 0.12m.


Total = 8m = 80Kpa.

Select Certikin BP commercial pump 2.5 HP.

kid pool pump 1.2L/s (P – 2)


Head = 6m    60 Kpa
Select Certikin Aquatron 111 0.5HP.

Chiller / heater pump 1.8L/s


Head = 1.6m    106Kpa
Select Aquatron 111 0.75 H.P

Chemical dosing for swimming pool


Flow = 23m3/hr
Q  CD
Chlorine pump capacity 
CC
CD = 10gm/m3 for outdoor pool (chlorine dosage).
CC = 120gm/lt (Chlorine concentration)
23 * 10
 = 1.9L/hr.
120
PH metering pump = 1.9L/hr = chlorine pump
AL-sulfate metering pump = 1.5 * chlorine pump
= 2.88L/hr.

chemical Dosing for Kid Pool


flow = 4.4m3/hr
4.4 * 10
chlorine pump capacity 
120
 0.4 L/hr.

PH metering pump = chlorine pump = 0.4L/hr.


AL-sulfate metering pump = 1.5 * 0.4 = 0.6L/hr.

You might also like