Scribd
Upload
42 views2 pages

ATR4518R11

This document provides specifications for an EasyRET Tri-Band antenna with three integrated remote control units (RCUs) operating from 698-960 MHz, 1710-2690 MHz (left array) and 1710-2690 MHz (right array). Key details include antenna dimensions of 2688 x 349 x 166 mm and weight of 30.5 kg, gain between 16.0-17.6 dBi across frequencies, input power ratings, and integrated RCU properties such as protocols, voltage range, and connector type. Accessories include a mechanical downtilt kit for 0-8 degrees.

Uploaded by

sebastiaan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
42 views2 pages

ATR4518R11

This document provides specifications for an EasyRET Tri-Band antenna with three integrated remote control units (RCUs) operating from 698-960 MHz, 1710-2690 MHz (left array) and 1710-2690 MHz (right array). Key details include antenna dimensions of 2688 x 349 x 166 mm and weight of 30.5 kg, gain between 16.0-17.6 dBi across frequencies, input power ratings, and integrated RCU properties such as protocols, voltage range, and connector type. Accessories include a mechanical downtilt kit for 0-8 degrees.

Uploaded by

sebastiaan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Preliminary Issue

ATR4518R11
DXXX-698-960/1710-2690/1710-2690-65/65/65-17i/18i/18i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m

Antenna Specifications
Electrical Properties
698 - 960 2 x (1710 - 2690)
Frequency range (MHz)
698 - 820 790 - 862 824 - 894 880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable 0 - 10 , continuously adjustable
0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°
Gain (dBi)
16.0 16.2 16.0 16.3 16.5 16.1 16.5 16.7 16.5 16.7 17.0 16.6 17.0 17.1 16.9 17.2 17.3 17.0 17.0 17.1 17.0 17.3 17.6 17.3

Side lobe suppression for first side 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°
lobe above main beam (Typ.) (dB) 18 17 16 18 18 17 18 17 17 18 16 16 17 17 16 17 17 16 18 17 15 16 16 15
Horizontal 3dB beam width (°) 67 66 65 62 63 62 61 60
Vertical 3dB beam width (°) 8.8 8.5 8.0 7.4 7.4 6.8 6.0 5.5
VSWR < 1.5
Intra-system: ≥ 28
Isolation between ports (dB)
Inter-system: ≥ 30
Front to back ratio, copolar (dB) Typ. 27 Typ. 28
Cross polar ratio (dB) 0° Typ. 20 Typ. 17
Max. power per input (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Total power per combined input (W) 1200 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

106

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2688 x 349 x 166

Packing dimensions (H x W x D) (mm) 2960 x 435 x 250

Antenna weight (kg) 30.5


Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 41.5 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
2580
2688

Operational temperature (℃) -40 .. +65


Frontal: 990 (at 150 km/h)
Wind load (N) Lateral: 325 (at 150 km/h)
Rear side: 1030 (at 150 km/h)
Max. operational wind speed (km/h) 150
Survival wind speed (km/h) 200
Connector 6 x 7/16 DIN Female
Connector position Bottom

Accessories
Item Model Description Weight Units per antenna

Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 8 ° 2.0 kg 1 (Separate packing)

1
Preliminary Issue

ATR4518R11
DXXX-698-960/1710-2690/1710-2690-65/65/65-17i/18i/18i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m

Integrated RCU Specifications


Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 10 (motor activated)
Power consumption (W)
< 0.5 (stand by)
Adjustment time (full range) (s) < 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
3 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function,
contact Huawei before system installation.

Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE

Integrated RCU S/N:


HWMxxx……..r
HWMxxx…...yL
HWMxxx….yyR
yL yyR

r - Red y - Yellow r
L - Left array R - Right array

698 - 960 MHz 1710 - 2690 MHz 1710 - 2690 MHz


(Left) (Right)

Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com
Any previous datasheet issues become invalid. 2 Issue: 2013-09-05

You might also like