Besavior Instruction

Besavior's 4 back buttons are factory defaulted as P1 P2 P3 P4→R1 R2 L1 L2, and their functions
can be set through the OLED screen.

One: Use third-party USB devices to run PS5 games

Connect third-party USB devices to Besavior’s expansion port (via the provided OTG cable) to

control all PS5 games. Please Turn off PS5 controller(hold home button 15s), and do following

way:

1: The third-party USB devices are connected to the provided OTG cable. If it is a keyboard and

mouse adapter such as XIM, first connect the keyboard/mouse/controller to the XIM, and then

connect the XIM to the OTG cable.

2: Connect the OTG cable to the special extension port of the Besavior controller

3A: PS5 controller enters wired mode: The controller is connected to the USB port on the PS5

console through USB cable (USB port in front is recommended).

3B: PS5 controller enters Bluetooth mode: The controller is connected to the 5V3A

charger/power bank via USB cable, and then press the HOME button of the controller to connect

to the PS5 console wirelessly via Bluetooth.

4: After the Besavior controller is successfully connected to the PS5 console through USB or

Bluetooth, the third-party USB device can be operated normally.

PS: The attached OTG cable has an external additional power supply function, and the user can

provide external additional power supply according to the situation.

Two: Use third-party Bluetooth devices to run PS5 games

This function is enabled through the built-in Bluetooth function of the screen. For details, please

refer to item 7 in the function description: Bluetooth

Three: Enter and exit screen settings

1: Start the controller (press the HOME button or connect an external USB cable), the BESAVIOR

icon will appear on the OLED screen, and the icon will disappear automatically

after 2 seconds.
2: Press once to enter the function setting mode (the Mapping is displayed by default), at
this time the controller button is in the setting mode and cannot control the game.
3: By pressing until the screen is off, the function setting mode is exited, and the controller
can control the game at this time.
4: By default, the first function is the mapping function, and the user can select other functions
through the . Currently available features are:

More functions will be added through upgrades in the future.

5: The corresponding functions of each icon on the screen are:
(Each button on the controller corresponds to the corresponding icon) This icon is missing

Four: Function instructions

1: Mapping

This function allows users to customize each button position. It supports the mapping of the

commonly used buttons on the controller to the 4 back buttons, and also supports the mutual

mapping between the controller buttons. The method of use is as follows:

A: After the Mapping text appears on the screen, press the , the content displayed on the

screen and the operation method are as follows:

B: Users can map multiple buttons in the same way.

C: After setting, press to return to the previous menu, press again to turn off the screen

and exit the function setting. At this time, the controller can control the game normally.

2: Turbo

This function allows users to customize the turbo function of each button. The method of use is

as follows:

A: Press the to enter the setting mode, enter the turbo interface through the , and

press the again, the content displayed on the screen and the operation method are as

follows:

B: The user can use the same method to perform multiple button turbos.

C: After setting, press to return to the previous menu, press again to turn off the screen

and exit the function setting. At this time, the controller can control the game normally.
3: Auto turbo

This function allows the user to press the button once and then release it, and the button will be

automatically pressed continuously. The method of use is as follows:

A: Press the to enter the setting mode, enter the auto turbo interface through the ,

and press the again, the content displayed on the screen and the operation method are as

follows:

B: The user can use the same method to perform multiple button auto turbos.

C: After setting, press to return to the previous menu, press again to turn off the screen

and exit the function setting. At this time, the controller can control the game normally.

4: Combination

The user can define a trigger button. After the trigger button is pressed, it is equivalent to

pressing multiple buttons at the same time.. The method of use is as follows:

A: Press the to enter the setting mode, enter the combination interface through the

, and press the again, the content displayed on the screen and the operation method are

as follows:
B: The user can use the same method to perform multiple group combination.

C: After setting, press to return to the previous menu, press again to turn off the screen

and exit the function setting. At this time, the controller can control the game normally.

5: Learning

This function allows users to record an operation and set a trigger button for this operation.

When the trigger button is pressed and then released, the recorded operation will run

automatically. This operation can be set to run once or infinitely, as follows:

A: Press to enter the setting mode, enter the learning function interface through the

, press again, the screen display content and operation method are as follows:

1: Entering the learning function for the first time, there is no recorded content, and its interface

is as follows:
2: After recording complete, there is recording content, the interface is as follows:

3: Run the recorded content

After the user finishes recording and sets or functions, press until the screen

turn off. Press the trigger button to start loop. Press the trigger button again to stop
loop.
4: Record again

Users need to delete old content before re-recording new content.

B: Under the same setting group, the user can only record one operation (Besavior has 4 groups

of settings, so it has 4 recording operations in total, and the first group of settings can record the

longest time).

C: After setting, press to return to the previous menu, press again to turn off the screen

and exit the function setting. At this time, the controller can control the game normally.

6: Multi-Sets

Users can set functions in multiple setting groups, and use the functions that have been set by

simply switching the setting groups. The method of use is as follows:

A: Press to enter the setting mode, enter the multi-group setting interface through the

, press again, the screen will appear:

B: The user can select 4 groups of settings by , then press to exit to the previous

menu, and press again to turn off the screen and exit the function setting. At this time, the

controller can control the game normally.

7: Bluetooth
This function allows third-party controllers to connect to Besavior controllers via Bluetooth , then
the third-party controllers can run the PS5 games. The method of use is as follows:
A: Press to enter the setting mode, enter the Bluetooth interface through the ,

press again, and the screen will display .

B: The user can choose to , then press to exit to the

previous menu, press again to turn off the screen and exit the function setting. At this time,
the third-party controller can be paired with Besavior via Bluetooth to run PS5 games.
C: After the Besavior controller is powered off, the Bluetooth is turned off. If you need to pair the
third-party controller with bluetooth again, you need to re-enable this function.

8: Language

This function can switch different languages, which is convenient for users to understand and use

Besavior functions. The method of use is as follows:

A: Press to enter the setting mode, enter the language interface through , press

again，the Chinese interface will appear on the screen.

B: The user can select by , then press to exit to the

previous menu, and press again to turn off the screen and exit the function setting. At this

time, the controller can control the game normally.

9: Restore Factory

This function can restore the current group to factory mode. If you need to restore the factory

mode of other groups, please go to the multi-group setting interface to select the group to be

restored, and then restore the factory settings. The method is as follows:

A: Press once to enter the setting mode, enter the factory reset interface through the

, press again, and the restore icon will appear on the screen.

B: Press once to restore, the will appears after the factory is successfully

restored. At this time, press to exit to the upper menu. Press again to turn off the

screen and exit the function setting. At this time, the controller can control the game normally.

Besavior Upgrade Tutorial

1: Turn off the controller (hold the HOME button for 15 seconds)

2: Through Besavior's TYPEC expansion port, connect to WINDOWS PC USB port with

the data cable.

3: Find the corresponding upgrade tutorial and firmware in the Besavior section under

forum.beloader.com. (click here)