We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 4
60W Mini Moving: Head Spot Light
User Manual
Cospo-260
Attention
1, Please read these operating instructions carefully to familiarize you with basic aperations of this
unit Before use
2, Without permitted, it is prohibited to spread the contents of this manual to others.
3, This manual is only to provide related information, and the contents of this manual will be
changed at any time without notice.
Installation
1. Make sure there is no flammable or explosive subjects within min 1.5 meter nearby the
instattation.
2.Before instailation, please check and make sure the power supply voltage meet request of the
system.
3. Please check ventilation and fans or exhaust passages are cleared.
4. The equipment should be fixed firmly.
Technical Specificationa Cospo-260
Specification
Light Source 60W
Power Supply 100-240V/50-60HZ
Rated Power 100W
Control Mode Auto/Sound/DMXx/Master-slave
DMX Channel 9ftt
Size 160*150*225
N.W./G.W. 2.7/3.5KG
Control Panel Instruction:
[MODE/ESC ] Menu Selection Button.
{ UP ] Scrof{s through menu items and numbers in ascending order.
[ DOWN ] Scrolls through menu items and numbers tn descending order.
ao ur vown exten [ ENTER ] Used to select and confirm/store the current selection. a
Operation Instructions
Rannet = Function - a = ey |
Addr | ADOI-A512 | 512 Address Setup
CHnd | cH Lichannel Mode ;
9CH ian Mode _ ; al
[ [Master | Master Mode
Sind | SLi DMX Mode -
SL2 __| Slave Mode al
SHO Effect option 0 |
SH1 __| Effect option 1 5 7
jstind [SH2___| Effect option 2 . al
[SH3 1 Effect option 3 -
SENS | 0-99 [ Sound Sensitivity Adjustment -
bland Tua No 512 signal zero iE _|
Auto No 512 signal AutoSSF 795
Soun No 512 signal Sound
Hold No 512 signal Keep the tast state control
LEd OFF S Barck-light Switch
ON Barck-ligh on
DISP no. Forward direction show
YES Inversion direction show
rPAN no. X Motor Tum
X Motor Inversion
Y Motor Turn
Y Motor Inversion
TL
YES
REST YES System Reset
DMX control
{Last radix point flicker on digital dispiay board when has DMX signal)
11CH
11CH | Function DMX value { Function
1 X Axis O~255 0~540°
X Axis fine O~255
tuning 16bit adjustabie
Y Axis 0~255,
Color choose
140-255 | Color change from slow to fast
0-63 Gobo choose
64-127 Gobo jitter
128-255 | Gobo change from slow to fast
Gobo
ee
strobe 0~255 non-function stow to fast
Master dimmer | 0~255 Linear dimming from dark to bright
XN motor | 9.255 | From fast to slow
speed0-59 No function
60-84 Auto Mode 3
85-109 Auto Mode 2
110-134 Auto Mode 1
Reset
10 General 135-159 Auto Mode 0
160-184 Sound Mode 3
185-209 Sound Mode 2
210-234 Sound Mode 1
235-255 Sound Mode 0
iL Reset 0-255
9CH
| 9CH | Function DMX value | Function
1 X Axis E O~255, 0~540"
2 X Axis fine O~255 a
tuning 16bit adjustable
0-139 Color choose
3 Color [110-255 [coor change fom sowie |
140-255 Color change from slow to fast
||pallen 0-63 Gobo choose = }
4 | Gobo 64-127 Gobo jitter
128-255 Gobo change from slow to fast a
5 strobe [06255 | non-function slow to fast an
6 Master dimmer | 0~255 Linear dimming from dark to bright
7 ercnote, 0-255 From fast to slow
effect & speed |” z
8 Auto Mode 0-255 From fast to slow