QUALITY REQUIREMENTS

for weldinga
European (internationalb) standards for fusion welding Destructive testing
Other continued
Arc welding Copper Nickel Titanium & Zirconium Impact EN ISO 9016
EN ISO 3834
Steel Aluminium ISO 2553
Symbolic repr.
EN ISO 9606-3 EN ISO 9606-4 EN ISO 9606-5 Tensile long. EN ISO 5178
Grouping of materials CEN ISO/TR 15608, 20172, 20173, 20174
Proc. numbers EN ISO 4063
Tensile perp. EN ISO 4136
Welder qualification EN ISO 9606-1 EN ISO 9606-2 Gas welding Electron beam welding Laser welding
Terms & Def. ISO/TR 25901-parts,
EN ISO 15609-2 EN ISO 15609-3 EN ISO 15609-4 CEN/TR 14599 Tensile cruc. EN ISO 9018
WPS EN ISO 15609-1
Def. weld proc. EN 14610 Bend EN ISO 5173
Welding procedure qualification EN ISO 15607, 15610, 15611, 15612, 15613 Cast iron Titanium & Zirconium Copper
Terms on joints EN ISO 17659 EN ISO 9017
Fracture
EN ISO 15614-1 EN ISO 15614-2 & -4 EN ISO 15614-3 EN ISO 15614-5 EN ISO 15614-6 & welds

Tolerances EN ISO 13920 Hardness EN ISO 9015-1 & -2

Welding operator qualification EN ISO 14732
Overlay welding Tube to tube plate Beam welding
Welding EN ISO 6947, Macroscopic EN ISO 17639,
NDT-personnel EN ISO 9712 EN ISO 15614-7 EN ISO 15614-8 EN ISO 15614-11 positions CEN/TR 14633 CR 12361 (ISO/TR 16060)

Welding coordination EN ISO 14731 Reinforcing steel Hot crack EN ISO 17641-1, -2 & -3
EN ISO 17660
Clad steel Laser Electron beam Cast iron
Inspection & testing during welding EN ISO 13916 EN 1011-5 EN 1011-6 EN 1011-7 EN 1011-8 Cold crack EN ISO 17642-1, -2 & -3
- Measurement of preheat and (ISO/TR 17671-5) (ISO/TR 17671-6) (ISO/TR 17671-7) (ISO/TR 17671-8) Welding consumables
interpass temp. EN 1011-2 & -3 EN 1011-4 Delta ferrite EN ISO 17655
- Recommendations for welding (ISO/TR 17671-2 & -3) (ISO/TR 17671-4) Product EN 13479
Environment, health & safety
- Comparison of methods for Quality req. for
CEN ISO/TR 17844 Fume sampling in EN ISO 15011-1 to -5 EN 12074
avoidance of cold cracks manufacturing
laboratory Acceptance levels for NDT
EN ISO 17635 Technical deli- EN ISO 544
Inspection & testing after welding
Fume sampling in very conditions Radiography EN ISO 10675-1 & -2
- NDT – General rules EN ISO 10882-1 & -2
EN ISO 17637 breathing zone
Procurement EN ISO 14344
- Visual testing
Filters EN ISO 15012-1, -2 & -4 Ultrasonic EN ISO 11666,
EN ISO 17636-1 & -2
- Radiographic testing Type testing EN 14532-1, -2 & -3 15626, 22825, 23279
- Ultrasonic testing EN ISO 17640, 10863, 13588 & 22825 Eye protection EN 169, 170, 171, 175 & 379
Testing EN ISO 15792-1, -2 & -3, 6847, 14372, Magnetic particle EN ISO 23278
- Magnetic particle testing EN ISO 17638 8249, 3690 & ISO 2401
Protective clothing EN ISO 11611, EN 12477
- Macro- & microscopic testing EN ISO 17639 Penetrant EN ISO 23277
EN 1598 TIG electrodes EN ISO 6848
- Penetrant testing (general) Welding curtains
EN ISO 3452-1 Visual testing (+ For all imperfections EN ISO
Environm. checklist EN 14717 Hard facing EN 14700 (ISO/TR 13393) macro/micro etc) 5817 etc apply
Post-weld heat treatment EN ISO 17663

Calibration/validation EN ISO 17662 Classification of welding consumables

Steel Other materials
Quality levels & Joint preparation
Non-alloy and High strength Creep resistant Stainless and Nickel Copper Aluminium Cast iron Titanium
Steel Aluminium
fine grain heat resisting
Qual.lev. fusion welding (not beam) EN ISO 5817 EN ISO 10042
EN ISO EN ISO
MMA EN ISO 2560 EN ISO 18275 EN ISO 3580 EN ISO 3581
Quality levels for beam welding EN ISO 13919-1 EN ISO 13919-2 14172 17777

Qual.lev. laser-arc hybrid welding EN ISO 12932 EN ISO

MIG/MAG EN ISO 14341 1071
Quality levels for cutting EN ISO 9013 EN ISO EN ISO EN ISO EN ISO EN ISO
16834 21952 24373 18273 24034
EN ISO EN ISO
Joint preparation EN ISO 9692-1 & -2 EN ISO 9692-3 TIG EN ISO 636 14343 18274

Other Electrodes etc for EN ISO EN ISO EN ISO

submerged arc 14171 26304 24598
Joint details Pressurized comp. / Steel constr. EN 1708-1 & -3 / -2 (ISO ’missing’)
Fluxes for
EN ISO 14174
Geometric imperfections - Fusion welding / Pressure welding EN ISO 6520-1 / -2 submerged arc
Definitions
Thermal cuts EN ISO 17658 EN ISO EN ISO EN ISO EN ISO
Cored wires EN ISO 17632
18276 17634 17633 12153
EN ISO
Designation system CEN ISO/TS 17845 1071
See continued Gas welding EN ISO 20378 EN ISO 20378

a References in fields with this colour are directly linked to EN ISO 3834 Shielding gas EN ISO 14175
b The ISO reference in brackets is in most cases identical with or is based on corresponding EN
“Standards do not replace education, sound judgment and good engineering practice”, Mathias Lundin Update available at www.svets.se/overview Mathias Lundin, Swedish Welding Commission, March 2021