Scribd
Upload
674 views3 pages

Configuring ONT and MDU On OLT by Using CLI Command

This document provides configuration commands for internet service, SIP service, and MDU on an OLT using CLI. It outlines steps such as creating VLANs and profiles, configuring upstream ports and link aggregation, adding ONTs, and assigning traffic parameters for PPPoE, SIP, and MDU services on the OLT. Commands are also provided for clock source configuration on the MDU itself.

Uploaded by

Reza Tri Faskilla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
674 views3 pages

Configuring ONT and MDU On OLT by Using CLI Command

This document provides configuration commands for internet service, SIP service, and MDU on an OLT using CLI. It outlines steps such as creating VLANs and profiles, configuring upstream ports and link aggregation, adding ONTs, and assigning traffic parameters for PPPoE, SIP, and MDU services on the OLT. Commands are also provided for clock source configuration on the MDU itself.

Uploaded by

Reza Tri Faskilla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Configuring ONT and MDU on OLT by Using CLI Command

1. Internet Service for ONT (Command on OLT)


 Create a service VLAN and add an upstream port to it.
Vlan 3881 smart
Port vlan 3881 0/19 1

 Configure upstream link aggregation


link-aggregation 0/19 0-1 0/20 0-1 ingress workmode lacp-static

 Configure a DBA profile


dba-profile add profile-id 18 profile-name "PPPoE" type4 max 102400

 Configure an ONT line profile.


ont-lineprofile gpon profile-id 3 profile-name "HG8247"
tcont 1 dba-profile-id 18
gem add 10 eth tcont 1
mapping-mode vlan
gem mapping 10 3 vlan 3881
commit
quit

 Configure an ONT service profile.


ont-srvprofile gpon profile-id 3 profile-name "HG8247"
ont-port pots 2 eth 4 catv 1
commit

 Add an ONT on the OLT.


Interface gpon 0/1
ont add 1 0 password k00108 always-on omci ont-lineprofile-id 3

Port yg mau ONT


digunakan ID

quit

 Configure a traffic profile.


traffic table ip index 7 name "PPPoE" cir 30720 cbs 985040 pir 30720 pbs 1968080 priority 0
priority-policy tag-in-package

 Create service ports


service-port vlan 3881 gpon 0/1/1 ont 0 gemport 10 multi-service user-vlan 3881 tag-transform
translate rx-cttr 7 tx-cttr 7

 Save
2. SIP service for ONT (Command on OLT)
 Create a service VLAN and add an upstream port to it.
Vlan 217 smart
Port vlan 217 0/19 1

 Configure upstream link aggregation


(if link aggregation already configure before, we don’t need to configure it anymore)

 Configure a DBA profile


dba-profile add profile-id 19 profile-name "SIP" type4 max 102400

 Configure an ONT line profile.


ont-lineprofile gpon profile-id 3 profile-name "HG8247"
tcont 2 dba-profile-id 19
gem add 217 eth tcont 2
mapping-mode vlan
gem mapping 217 4 vlan 217
commit
quit

 Configure an ONT service profile.


(if an ONT service profile already configure before, we don’t need to configure it anymore)

 Add an ONT on the OLT.


(if an ONT already add before, we don’t need to configure it anymore)

 Configure a traffic profile.


traffic table ip index 8 name "SIP" cir 30720 cbs 985040 pir 30720 pbs 1968080 priority 0 priority-
policy tag-in-package

 Create service ports


service-port vlan 217 gpon 0/1/1 ont 0 gemport 217 multi-service user-vlan 217 tag-transform
translate rx-cttr 8 tx-cttr 8

 Save

3. Command for MDU on OLT


 Configure a DBA profile
dba-profile add profile-id 17 profile-name 2G_8E1 type1 fix 57856 bandwidth_compensate yes

 Configure an ONT line profile.


ont-lineprofile gpon profile-id 1 profile-name MA5612_8E1
tcont 1 dba profile-id 17
gem add 1 tdm tcont 1 priority-queue 0
gem add 2 tdm tcont 1 priority-queue 0
gem add 3 tdm tcont 1 priority-queue 0
gem add 4 tdm tcont 1 priority-queue 0
gem add 5 tdm tcont 1 priority-queue 0
gem add 6 tdm tcont 1 priority-queue 0
gem add 7 tdm tcont 1 priority-queue 0
gem add 8 tdm tcont 1 priority-queue 0
gem mapping 1 0 e1 1
gem mapping 2 0 e1 2
gem mapping 3 0 e1 3
gem mapping 4 0 e1 4
gem mapping 5 0 e1 5
gem mapping 6 0 e1 6
gem mapping 7 0 e1 7
gem mapping 8 0 e1 8

 Add an ONT on the OLT.


interface gpon 0/1
ont add 0 0 password k00107 always-on snmp ont-lineprofile-id 1 desc KUNCI_A
ont snmp-profile 0 0 profile-id 1
quit

4. Command on MDU
interface gponnni 0/0/0
password k00107
quit
clock source 0 0/0/0
clock priority system 0
board confirm 0
interface tdm 0/1
port all udt system
save

You might also like