0% found this document useful (0 votes)

69 views1,514 pages

Thomson Tg788 Guide Reference Telnet

Uploaded by

jenom1957

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as TXT, PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

69 views1,514 pages

Thomson Tg788 Guide Reference Telnet

Uploaded by

jenom1957

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as TXT, PDF, TXT or read online on Scribd

You are on page 1/ 1514

------------------------------------------------------------------------

______ Technicolor TG788vn

___/_____/\
/ /\\ 8.C.M.0
_____/__ / \\
_/ /\_____/___ \ Copyright (c) 1999-2012, Technicolor
// / \ /\ \
_______//_______/ \ / _\/______
/ / \ \ / / / /\
__/ / \ \ / / / / _\__
/ / / \_______\/ / / / / /\
/_/______/___________________/ /________/ /___/ \
\ \ \ ___________ \ \ \ \ \ /
\_\ \ / /\ \ \ \ \___\/
\ \/ / \ \ \ \ /
\_____/ / \ \ \________\/
/__________/ \ \ /
\ _____ \ /_____\/
\ / /\ \ /___\/
/____/ \ \ /
\ \ /___\/
\____\/

------------------------------------------------------------------------
Following commands are available :

help : Displays this help information

menu : Displays menu
? : Displays this help information
exit : Exits this shell.
.. : Exits group selection.
saveall : Saves current configuration.
ping : Send ICMP ECHO_REQUEST packets.
traceroute : Send ICMP/UDP packets to trace the ip path.

Following command groups are available :

contentsharing firewall printersharing pwr service

connection cwmp dsd grp led
config debug dhcp dns download
dyndns env eth atm expr
hostmgr ids igmp interface ip
ipqos label language mbus memm
mlp mobile nat ppp pptp
ptrace script sipserver sntp software
statecheck syslog system tls upgrade
upnp user voice wansensing webserver
wireless xdsl
Following commands are available :

help : Displays this help information

Following command groups are available :

contentsharing firewall printersharing pwr service

help : Displays this help information

Following command groups are available :

contentsharing firewall printersharing pwr service

group
ar group
Following command groups are available :

member
ar group member
Following commands are available :

add : add member

delete : delete member
list : members
ar group member add
add member
Syntax : add groupname = <{root|daemon|bin|sys|adm|tty|disk|lp|mail|news|uucp|
proxy|kmem|dialout|fax|voice|cdrom|floppy|tape|sudo|
audio|dip|postgres|www-data|backup|operator|list|irc|
src|gnats|shadow|utmp|video|staff|games|users|nogroup|
SuperUser|TechnicalSupport|Administrator|WebsevUser|
LAN_Admin|PowerUser|WAN_Admin}>
username = <{Administrator|su|tech}>

Parameters :
groupname = <{root|daemon|bin|sys|adm|tty|disk|lp|mail|news|uucp|proxy|kmem|
dialout|fax|voice|cdrom|floppy|tape|sudo|audio|dip|postgres|www-
data|backup|operator|list|irc|src|gnats|shadow|utmp|video|staff|
games|users|nogroup|SuperUser|TechnicalSupport|Administrator|
WebsevUser|LAN_Admin|PowerUser|WAN_Admin}>

username = <{Administrator|su|tech}>
ar group member delete
delete member
Syntax : delete groupname = <{root|daemon|bin|sys|adm|tty|disk|lp|mail|news|
uucp|proxy|kmem|dialout|fax|voice|cdrom|floppy|
tape|sudo|audio|dip|postgres|www-data|backup|
operator|list|irc|src|gnats|shadow|utmp|video|
staff|games|users|nogroup|SuperUser|
TechnicalSupport|Administrator|WebsevUser|
LAN_Admin|PowerUser|WAN_Admin}>
username = <{Administrator|su|tech}>

username = <{Administrator|su|tech}>
ar group member list
members
Syntax : list [groupname = <{root|daemon|bin|sys|adm|tty|disk|lp|mail|news|
uucp|proxy|kmem|dialout|fax|voice|cdrom|floppy|tape|
sudo|audio|dip|postgres|www-data|backup|operator|
list|irc|src|gnats|shadow|utmp|video|staff|games|
users|nogroup|SuperUser|TechnicalSupport|
Administrator|WebsevUser|LAN_Admin|PowerUser|
WAN_Admin}>]

Parameters :
[groupname = <{root|daemon|bin|sys|adm|tty|disk|lp|mail|news|uucp|proxy|
kmem|dialout|fax|voice|cdrom|floppy|tape|sudo|audio|dip|
postgres|www-data|backup|operator|list|irc|src|gnats|shadow|
utmp|video|staff|games|users|nogroup|SuperUser|
TechnicalSupport|Administrator|WebsevUser|LAN_Admin|PowerUser|
WAN_Admin}>]
atm
Following commands are available :

ifadd : Create a new ATM interface.

ifdelete : Delete an ATM interface.
ifattach : Attach an ATM interface.
ifdetach : Detach an ATM interface.
ifconfig : Modify an ATM interface.
iflist : Display the ATM interfaces.
flush : Flush all ATM interfaces.

Following command groups are available :

cac debug oam phonebook qos

qosbook
atm cac
Following commands are available :

config : Configure ATM connection admission control.

overbooking : Configure ATM overbooking parameters.
list : List all CAC parameters.
atm cac config
Configure ATM connection admission control.
Syntax : config port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
state = <{disabled|enabled}>

Parameters :
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
The port for which CAC is configured.
state = <{disabled|enabled}>
Enable/disable CAC for an ATM port.
atm cac list
List all CAC parameters.
Syntax : list
atm cac overbooking
Configure ATM overbooking parameters.
Syntax : overbooking [rt = <number{0-1000}>] [nrt = <number{0-1000}>]

Parameters :
[rt = <number{0-1000}>]
The realtime overbooking percentage.
[nrt = <number{0-1000}>]
The non-realtime overbooking percentage.
atm debug
Following commands are available :

traceconfig : Display/Modify AAL5 debug trace configuration.

portstats : Display port specific atm statistics.
vcstats : Display VC specific atm statistics.
aal5stats : Display AAL5 port specific atm statistics.
gstats : Display ATM global statistics.
atm debug aal5stats
Display AAL5 port specific atm statistics.
Syntax : aal5stats port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
vpi = <number{0-31}> [vci = <number{0-511}>]
[clear = <{disabled|enabled}>]

Parameters :
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
The port number for which statistics will be retrieved.
vpi = <number{0-31}>
The VPI number for which statistics will be retrieved.
[vci = <number{0-511}>]
The VCI number for which statistics will be retrieved.
[clear = <{disabled|enabled}>]
Clear the statistics after request.
atm debug gstats
Display ATM global statistics.
Syntax : gstats [clear = <{disabled|enabled}>]

Parameters :
[clear = <{disabled|enabled}>]
Clear the statistics after request.
atm debug portstats
Display port specific atm statistics.
Syntax : portstats port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
[clear = <{disabled|enabled}>]

Parameters :
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
The port for which statistics will be retrieved.
[clear = <{disabled|enabled}>]
Clear the statistics after the request.
atm debug traceconfig
Display/Modify AAL5 debug trace configuration.
Syntax : traceconfig [len = <number>] [intf = <{}>]
[state = <{disabled|enabled}>]

Parameters :
[len = <number>]
Maximum number of AAL5 payload bytes that will be shown (0-2000, global
setting).
[intf = <{}>]
The name of the ATM interface to configure.
[state = <{disabled|enabled}>]
Enable/disable AAL5 debug tracing.
atm debug vcstats
Display VC specific atm statistics.
Syntax : vcstats port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
vpi = <number{0-31}> [vci = <number{0-511}>]
[clear = <{disabled|enabled}>]

Parameters :
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
The port number for which statistics will be retrieved.
vpi = <number{0-31}>
The VPI number for which statistics will be retrieved.
[vci = <number{0-511}>]
The VCI number for which statistics will be retrieved.
[clear = <{disabled|enabled}>]
Clear the statistics after request.
atm flush
Flush all ATM interfaces.
Syntax : flush
atm ifadd
Create a new ATM interface.
Syntax : ifadd intf = <string> [queues = <number{0-8}>]
[priority = <{strict|cwrr|pwrr|wfq}>]

Parameters :
intf = <string>
The name for the new ATM interface. If not specified, the destination
will double as interface name.
[queues = <number{0-8}>]
Number of Transmit Queue of the EFM Interface (default=1)
[priority = <{strict|cwrr|pwrr|wfq}>]
The weight of this queue used for Strict Priority, WFQ, CWRR or PWRR.
(default=strict priority)
atm ifattach
Attach an ATM interface.
Syntax : ifattach intf = <{}>

Parameters :
intf = <{}>
The name of the ATM interface.
atm ifconfig
Modify an ATM interface.
Syntax : ifconfig intf = <{}> [dest = <{}>] [qos = <}>]
[clp = <{0|1|classification}>] [clpthresh = <number{0-15}>]
[encaps = <{llc|vcmux}>] [fcs = <{disabled|enabled|auto}>]
[ulp = <{mac|ip|ppp}>] [retry = <number{0-65535}>]

Parameters :
intf = <{}>
The name of the ATM interface to configure.
[dest = <{}>]
The WAN destination for this ATM interface. Typically, a phonebook
entry.
[qos = <}>]
The name of a qosbook entry defining the QoS parameters for the WAN link.
[clp = <{0|1|classification}>]
The mode used to determine the CLP bit value.
[clpthresh = <number{0-15}>]
Priority class threshold where CLP becomes 0 (for all classes >=
threshold).
[encaps = <{llc|vcmux}>]
The WAN protocol encapsulation to be used on this interface.
[fcs = <{disabled|enabled|auto}>]
Whether or not to include the Ethernet FCS in the packet header (only
used for llc encapsulation for mac).
[ulp = <{mac|ip|ppp}>]
The upper layer protocol.
[retry = <number{0-65535}>]
The number of times the WAN connection setup should retry before giving
up.
atm ifdelete
Delete an ATM interface.
Syntax : ifdelete intf = <{}>

Parameters :
intf = <{}>
The name of the ATM interface.
atm ifdetach
Detach an ATM interface.
Syntax : ifdetach intf = <{}>

Parameters :
intf = <{}>
The name of the ATM interface.
atm iflist
Display the ATM interfaces.
Syntax : iflist [intf = <{}>]

Parameters :
[intf = <{}>]
The name of an ATM interface.
atm oam
Following commands are available :

ping : Send ATM loopback cells.

config : Modify the ATM OAM settings.
modify : Modify the ATM OAM data blocking mode.
list : Display the ATM OAM settings.

Following command groups are available :

cc vclb
atm oam cc
Following commands are available :

modify : Modify CC on the connection.

send : Send CC activate/deactivate to connection.
list : Display CC configuration.
atm oam cc list
Display CC configuration.
Syntax : list
atm oam cc modify
Modify CC on the connection.
Syntax : modify port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
vpi = <number{0-31}> [vci = <number{0-511}>]
[transmit = <{disabled|enabled}>]
[receive = <{disabled|enabled}>]
[auto = <{disabled|enabled}>] [span = <{segment|end2end}>]

Parameters :
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
The ATM port number.
vpi = <number{0-31}>
The Virtual Path Identifier.
[vci = <number{0-511}>]
The Virtual Channel Identifier.
[transmit = <{disabled|enabled}>]
Enable/disable transmission of CC cells.
[receive = <{disabled|enabled}>]
Enable/disable loss of continuity.
[auto = <{disabled|enabled}>]
Enable/disable remote CC activation/deactivation.
[span = <{segment|end2end}>]
End2end or segment continuity check.
atm oam cc send
Send CC activate/deactivate to connection.
Syntax : send port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
vpi = <number{0-31}> [vci = <number{0-511}>]
[span = <{segment|end2end}>] [action = <{activate|deactivate}>]
[direction = <{source|sink|both}>]

Parameters :
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
The ATM port number.
vpi = <number{0-31}>
The Virtual Path Identifier.
[vci = <number{0-511}>]
The Virtual Channel Identifier.
[span = <{segment|end2end}>]
Send CC action end2end or segment.
[action = <{activate|deactivate}>]
The CC action.
[direction = <{source|sink|both}>]
Source, sink or both (default: both).
atm oam config
Modify the ATM OAM settings.
Syntax : config [clp = <number{0-1}>] [loopbackid = <string>]

Parameters :
[clp = <number{0-1}>]
The CLP bit value of the OAM cells.
[loopbackid = <string>]
The loopback id (hexadecimal string) for processing of segment loopback
cells.
atm oam list
Display the ATM OAM settings.
Syntax : list
atm oam modify
Modify the ATM OAM data blocking mode.
Syntax : modify port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
blocking = <{disabled|enabled}>

Parameters :
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
The port for which OAM blocking is configured.
blocking = <{disabled|enabled}>
Enable/disable OAM blocking.
atm oam ping
Send ATM loopback cells.
Syntax : ping dest = <{}> [count = <number{1-1000000}>]
[interval = <number{100-1000000}>]

Parameters :
dest = <{}>
The destination address for the request.
[count = <number{1-1000000}>]
The number of pings to send.
[interval = <number{100-1000000}>]
The interval in milliseconds between packets.
atm oam vclb
Following commands are available :

add : Create a loopback connection for VC

del : Delete a loopback connection for VC
list : List all VC loopback connections
atm oam vclb add
Create a loopback connection for VC
Syntax : add port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
vpi = <number{0-31}> [vci = <number{0-511}>]

Parameters :
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
The ATM port number.
vpi = <number{0-31}>
The Virtual Path Identifier.
[vci = <number{0-511}>]
The Virtual Channel Identifier.
atm oam vclb del
Delete a loopback connection for VC
Syntax : del port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
vpi = <number{0-31}> [vci = <number{0-511}>]

list : Display the phonebook.

add : Add a new phonebook entry.
delete : Delete a phonebook entry.
flush : Flush all phonebook entries.
atm phonebook add
Add a new phonebook entry.
Syntax : add name = <string>
addr = <atmchannel : PVC syntax is [port.]vpi.vci port=dsl0|dsl1|
...>

Parameters :
name = <string>
The phonebook name for this destination.
addr = <atmchannel : PVC syntax is [port.]vpi.vci port=dsl0|dsl1|...>
The address for this destination.
atm phonebook delete
Delete a phonebook entry.
Syntax : delete name = <{}>

Parameters :
name = <{}>
The name of the phonebook to delete.
atm phonebook flush
Flush all phonebook entries.
Syntax : flush
atm phonebook list
Display the phonebook.
Syntax : list
atm qos
Following commands are available :

list : Display the Qos list.

Following command groups are available :

queue
atm qos list
Display the Qos list.
Syntax : list [intf = <= <{root|daemon|bin|sys|adm|tty|disk|lp|mail|news|uucp|
proxy|kmem|dialout|fax|voice|cdrom|floppy|tape|sudo|
audio|dip|postgres|www-data|backup|operator|list|irc|src|
gnats|shadow|utmp|video|staff|games|users|nogroup|
SuperUser|TechnicalSupport|Administrator|WebsevUser|
LAN_Admin|PowerUser|WAN_Admin}>] >]

Parameters :
[intf = <isabled|enabled}> >]
The name of the ATM interface to configure.
atm qos queue
Following commands are available :

config : Configure TX Queue entry.

list : Display the Qos list.
atm qos queue config
Configure TX Queue entry.
Syntax : config qname = <}> weight = <number{0-64}>
maxpackets = <number{0-2500}> loprio = <number{0-15}>
hiprio = <number{0-15}>

Parameters :
qname = <}>
The name of the Transmit Queue.
weight = <number{0-64}>
Weight value of the chosen weight algorithm.
maxpackets = <number{0-2500}>
The maximum number of packets in the queues.
loprio = <number{0-15}>
The lowest internal priority boundary for entering this queue.
hiprio = <number{0-15}>
The highest internal priority boundary for entering this queue.
atm qos queue list
Display the Qos list.
Syntax : list [intf = <ber{0-1000}>] >]

Parameters :
[intf = <disabled|enabled}>] >]
The name of the ATM interface to configure.
atm qosbook
Following commands are available :

config : Modify the qosbook configuration.

ctdlist : Display all connection traffic descriptors.
ctdadd : Add a new connection traffic descriptor.
ctddelete : Delete a connection traffic descriptor.
list : Display the qosbook.
add : Add a new qosbook entry.
delete : Delete a qosbook entry.
flush : Flush all qosbook entries.
atm qosbook add
Add a new qosbook entry.
Syntax : add name = <string> [txctd = <}>] [rxctd = <}>]

Parameters :
name = <string>
The name for the new QoS entry.
[txctd = <}>]
The name of the CTD for transmit (upstream) direction.
[rxctd = <}>]
The name of the CTD for receive (downstream) direction.
atm qosbook config
Modify the qosbook configuration.
Syntax : config [format = <{bytes|cells}>]

Parameters :
[format = <{bytes|cells}>]
The input, output format of the qosbook.
atm qosbook ctdadd
Add a new connection traffic descriptor.
Syntax : ctdadd name = <string>
conformance = <{UBR|CBR|VBR|UBR.1|UBR.2|UBR.mdcr|CBR.1|VBR.1|
VBR.2|VBR.3|VBR.c|VBR.nt|VBR.t|GFR.1|GFR.2}>
[peakrate = <number{0-27786}>] [sustrate = <number{0-27786}>]
[maxburst = <number{48-12240}>] [minrate = <number{0-27786}>]
[maxframe = <number{0-255}>] [celldelay = <number>]
[realtime = <{enabled|disabled}>]
[framediscard = <{enabled|disabled}>]

Parameters :
name = <string>
The name for the new CTD entry.
conformance = <{UBR|CBR|VBR|UBR.1|UBR.2|UBR.mdcr|CBR.1|VBR.1|VBR.2|VBR.3|
VBR.c|VBR.nt|VBR.t|GFR.1|GFR.2}>
The ATM service conformance definition.
[peakrate = <number{0-27786}>]
The peak rate (in kilobits per second). Use '0' to indicate linerate for
UBR.
[sustrate = <number{0-27786}>]
The sustainable rate (in kilobits per second). (VBR only)
[maxburst = <number{48-12240}>]
The maximum burst size (in bytes). (VBR or GFR)
[minrate = <number{0-27786}>]
The minimum rate (in kilobits per second). (UBR.m or GFR)
[maxframe = <number{0-255}>]
The maximum frame size (in bytes). (GFR only)
[celldelay = <number>]
Cell delay variation in tenths of microseconds.
[realtime = <{enabled|disabled}>]
Enable/disable realtime traffic (VBR only).
[framediscard = <{enabled|disabled}>]
Enable/disable frame discard.
atm qosbook ctddelete
Delete a connection traffic descriptor.
Syntax : ctddelete name = <}> [force = <{disabled|enabled}>]

Parameters :
name = <}>
The name of the CTD entry to delete.
[force = <{disabled|enabled}>]
Force delete even when the entry is still in use.
atm qosbook ctdlist
Display all connection traffic descriptors.
Syntax : ctdlist
atm qosbook delete
Delete a qosbook entry.
Syntax : delete name = <}> [force = <{disabled|enabled}>]

Parameters :
name = <}>
The name of the qosbook entry to delete.
[force = <{disabled|enabled}>]
Force delete even when the entry is still in use.
atm qosbook flush
Flush all qosbook entries.
Syntax : flush
atm qosbook list
Display the qosbook.
Syntax : list
config
Following commands are available :

save : Store current configuration to backup file

load : Load saved or default configuration.
delete : Delete a user configuration file.
flush : Flush the loaded configuration.
list : Show the current configuration set
dump : Show the saved configuration file
config delete
Delete a user configuration file.
Syntax : delete [filename = <user configuration filename>]

Parameters :
[filename = <user configuration filename>]
configuration file to erase
config dump
Show the saved configuration file
Syntax : dump
config flush
Flush the loaded configuration.
Syntax : flush [flush_ip = <{enabled|disabled}>]

Parameters :
[flush_ip = <{enabled|disabled}>]
Flush IP settings or not.
config list
Show the current configuration set
Syntax : list [templates = <{disabled|enabled}>]

Parameters :
[templates = <{disabled|enabled}>]
list template files
config load
Load saved or default configuration.
Syntax : load [load_ip = <{enabled|disabled}>]
[defaults <{disabled|enabled}>] [flush = <{enabled|disabled}>]
[echo = <{disabled|enabled}>] [filename = <string>]

Parameters :
[load_ip = <{enabled|disabled}>]
Load IP settings or not.
[defaults <{disabled|enabled}>]
Load default instead of saved configuration.
[flush = <{enabled|disabled}>]
Flush current configuration before loading new one.
[echo = <{disabled|enabled}>]
Echo each command string when loaded.
[filename = <string>]
Configuration filename.
[persistent = <{(HIDDEN)}>]
(HIDDEN)
config save
Store current configuration to backup file
Syntax : save filename = <user configuration filename>

Parameters :
filename = <user configuration filename>
Filename for backupfile of current configuration
connection
Following commands are available :

config : Modify global connection configuration.

timerconfig : Modify connection timeout handling.
timerclear : Clear connection timeout to default.
info : Display all modules with some info.
list : Display the currently known connections.
describe : Describe the streams of a connection.
refresh : Invalidate all cached decisions.
clear : Kill all connections.
clean : Clean connection database by forcing timeouts.
stats : Display connection and stream statistics.
reserve : Reserve connections.
release : Release connections.
applist : Display the available CONN/NAT application helpers.
appconfig : Modify a CONN/NAT application helper configuration
appinfo : Display CONN/NAT application specific info
bindlist : Display the CONN/NAT application helper/port bindings.
bind : Create a CONN/NAT application helper/port binding.
unbind : Delete a CONN/NAT application helper/port binding.
flush : Flush the connection configuration.
debug : Connection debug commands.

Following command groups are available :

bindblacklist flow
connection appconfig
Modify a CONN/NAT application helper configuration
Syntax : appconfig application = <{IP6TO4|PPTP|ESP|IKE|SIP|JABBER|CU/SeeMe|
RAUDIO(PNA)|RTSP|ILS|H245|H323|IRC|DHCP|
GAME(UDP)|CONE(UDP)|LOOSE(UDP)|SNMP_TRAP|
FTP}>
[trace = <{disabled|enabled}>]
[timeout = <number{0-32000}>]
[childqos = <{None|DSCP|Interactive|Management|SIPS_RTP|
SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default|
voice-only}>]
[floating = <{disabled|enabled}>]
[proxy = <{disabled|enabled}>]
[tracelevel = <number{1-4}>]
[snooping = <{disabled|enabled}>]
[translate-predict = <{disabled|enabled}>]

Parameters :
application = <{IP6TO4|PPTP|ESP|IKE|SIP|JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|
ILS|H245|H323|IRC|DHCP|GAME(UDP)|CONE(UDP)|LOOSE(UDP)|
SNMP_TRAP|FTP}>
The name of a CONN/NAT application helper as listed by ':connection
applist'.
[trace = <{disabled|enabled}>]
Enable/disable CONN/NAT application helper traces.
[timeout = <number{0-32000}>]
The maximum timeout in seconds to keep predicted child connections
around.
[childqos = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-
RTP|VoIP-Signal|default|voice-only}>]
Used QOS label for the predicted child connections.
[floating = <{disabled|enabled}>]
Enable/disabled floating port for IKE helper.
[proxy = <{disabled|enabled}>]
Enable/disable FTP proxy support.
[tracelevel = <number{1-4}>]
SIP only: SIP trace level: 1=feature errors; 2=feature traces; 3=all
errors; 4=all traces.
[snooping = <{disabled|enabled}>]
SIP only: Enable/disable snooping
[translate-predict = <{disabled|enabled}>]
SIP only: Enable/disable prediction
[SIP_ALG = <{(HIDDEN)}>]
(HIDDEN)
connection appinfo
Display CONN/NAT application specific info
Syntax : appinfo application = <{IP6TO4|PPTP|ESP|IKE|SIP|JABBER|CU/SeeMe|
RAUDIO(PNA)|RTSP|ILS|H245|H323|IRC|DHCP|
GAME(UDP)|CONE(UDP)|LOOSE(UDP)|SNMP_TRAP|FTP}>

add : Add bind blacklist entry.

delete : Delete bind blacklist entry.
list : List all bind blacklist entries.
connection bindblacklist add
Add bind blacklist entry.
Syntax : add ip = <ip-address>
[proto = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|tcp|udp|
vines|xns-idp|6to4|ipip} or number>]
[port = <port-range>]

Parameters :
ip = <ip-address>
The source or destination IP address.
[proto = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|tcp|udp|vines|xns-
idp|6to4|ipip} or number>]
The IP protocol (name or number).
[port = <port-range>]
The port number or range.
connection bindblacklist delete
Delete bind blacklist entry.
Syntax : delete ip = <ip-address>
[proto = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|tcp|
udp|vines|xns-idp|6to4|ipip} or number>]
[port = <port-range>]

Parameters :
ip = <ip-address>
The source or destination IP address.
[proto = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|tcp|udp|vines|xns-
idp|6to4|ipip} or number>]
The IP protocol (name or number).
[port = <port-range>]
The port number or range.
connection bindblacklist list
List all bind blacklist entries.
Syntax : list
connection bindlist
Display the CONN/NAT application helper/port bindings.
Syntax : bindlist
connection clean
Clean connection database by forcing timeouts.
Syntax : clean [level = <number{0-9}>]

Parameters :
[level = <number{0-9}>]
Scrubbing level.
connection clear
Kill all connections.
Syntax : clear
connection config
Modify global connection configuration.
Syntax : config [configchangemode = <{immediate|delayed}>]
[probes = <{disabled|enabled}>]
[udptrackmode = <{strict|loose}>]
[safepredicts = <{disabled|enabled}>]

Parameters :
[configchangemode = <{immediate|delayed}>]
Select how config changes are handled.
[probes = <{disabled|enabled}>]
Enable/disable alive probes on idle connections.
[udptrackmode = <{strict|loose}>]
UDP connection tracking mode.
[safepredicts = <{disabled|enabled}>]
Enable/disable safe CONN/NAT application helper predictions (predicted
connection must have same IP addresses as its parent).
connection debug
Connection debug commands.
Syntax : debug [trace = <{disabled|enabled}>]

Parameters :
[trace = <{disabled|enabled}>]
Enable/disable traces.
connection describe
Describe the streams of a connection.
Syntax : describe id = <number{0-4095}>

Parameters :
id = <number{0-4095}>
The connection ID to describe.
connection flow
Following commands are available :

add : Add flow

delete : Delete flow
qoslabeladd : Assign qos label to flow
qoslabeldel : Remove qos label from flow
list : List all flows
flush : Flush flow configuration
connection flow add
Add flow
Syntax : add [name = <string>]

Parameters :
[name = <string>]
Flow name.
connection flow delete
Delete flow
Syntax : delete [flow = <{CWMP|VoIP-terminated|}>]

Parameters :
[flow = <{CWMP|VoIP-terminated|}>]
Flow name.
connection flow flush
Flush flow configuration
Syntax : flush
connection flow list
List all flows
Syntax : list
connection flow qoslabeladd
Assign qos label to flow
Syntax : qoslabeladd [flow = <{CWMP|VoIP-terminated|}>]
[qoslabel = <{None|DSCP|Interactive|Management|SIPS_RTP|
SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default|
voice-only}>]

Parameters :
[flow = <{CWMP|VoIP-terminated|}>]
Flow name.
[qoslabel = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-
RTP|VoIP-Signal|default|voice-only}>]
Qos label name.
connection flow qoslabeldel
Remove qos label from flow
Syntax : qoslabeldel [flow = <{CWMP|VoIP-terminated|}>]
[qoslabel = <{None|DSCP|Interactive|Management|SIPS_RTP|
SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default|
voice-only}>]

Parameters :
[flow = <{CWMP|VoIP-terminated|}>]
Flow name.
[qoslabel = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-
RTP|VoIP-Signal|default|voice-only}>]
Qos label name.
connection flush
Flush the connection configuration.
Syntax : flush
connection info
Display all modules with some info.
Syntax : info
connection list
Display the currently known connections.
Syntax : list [id = <number{0-4095}>] [nr = <number{1-4096}>]
[history = <{disabled|enabled}>]
[proto = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|tcp|udp|
vines|xns-idp|6to4|ipip} or number>]
[ip = <ip-range>] [port = <port-range>]
[intf = <{loop|Internet|LocalNetwork}>]
[routelabel = <{None|DSCP|Interactive|Management|SIPS_RTP|
SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default|voice-
only}>]
[qoslabel = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|
Video|VoIP-RTP|VoIP-Signal|default|voice-only}>]
[application = <{IP6TO4|PPTP|ESP|IKE|SIP|JABBER|CU/SeeMe|
RAUDIO(PNA)|RTSP|ILS|H245|H323|IRC|DHCP|GAME(UDP)|
CONE(UDP)|LOOSE(UDP)|SNMP_TRAP|FTP}>]
[reserved = <{false|true}>] [accelerated = <{false|true}>]
[prioritized = <{false|true}>]

Parameters :
[id = <number{0-4095}>]
The connection ID.
[nr = <number{1-4096}>]
The maximum number of connections to display (30 by default).
[history = <{disabled|enabled}>]
If enabled, show history.
[proto = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|tcp|udp|vines|xns-
idp|6to4|ipip} or number>]
The IP protocol (name or number).
[ip = <ip-range>]
The IP address or range.
[port = <port-range>]
The port number or range.
[intf = <{loop|Internet|LocalNetwork}>]
The IP interface name.
[routelabel = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|
VoIP-RTP|VoIP-Signal|default|voice-only}>]
The route label name.
[qoslabel = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-
RTP|VoIP-Signal|default|voice-only}>]
The QoS label name.
[application = <{IP6TO4|PPTP|ESP|IKE|SIP|JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|
ILS|H245|H323|IRC|DHCP|GAME(UDP)|CONE(UDP)|LOOSE(UDP)|
SNMP_TRAP|FTP}>]
The name of CONN/NAT application helper.
[reserved = <{false|true}>]
Filter on "R" connection flag .
[accelerated = <{false|true}>]
Filter on "A" stream flag.
[prioritized = <{false|true}>]
Filter on "P" stream flag.
connection refresh
Invalidate all cached decisions.
Syntax : refresh
connection release
Release connections.
Syntax : release [flow = <{CWMP|VoIP-terminated|}>]

Parameters :
[flow = <{CWMP|VoIP-terminated|}>]
Flow name.
connection reserve
Reserve connections.
Syntax : reserve [flow = <{CWMP|VoIP-terminated|}>] [amount = <number>]

Parameters :
[flow = <{CWMP|VoIP-terminated|}>]
Flow name.
[amount = <number>]
Number of connections to reserve for this flow.
connection stats
Display connection and stream statistics.
Syntax : stats
connection timerclear
Clear connection timeout to default.
Syntax : timerclear [timer = <{tcpidle|tcpneg|tcpkill|udpidle|udpkill|icmpidle|
icmpkill|ipidle|ipkill}>]

Parameters :
[timer = <{tcpidle|tcpneg|tcpkill|udpidle|udpkill|icmpidle|icmpkill|ipidle|
ipkill}>]
The name of the connection idle timer.
connection timerconfig
Modify connection timeout handling.
Syntax : timerconfig [timer = <{tcpidle|tcpneg|tcpkill|udpidle|udpkill|
icmpidle|icmpkill|ipidle|ipkill}>]
[value = <number{0-86400}>]

Parameters :
[timer = <{tcpidle|tcpneg|tcpkill|udpidle|udpkill|icmpidle|icmpkill|ipidle|
ipkill}>]
The name of the connection idle timer.
[value = <number{0-86400}>]
The timer expire value in seconds.
connection unbind
Delete a CONN/NAT application helper/port binding.
Syntax : unbind application = <{IP6TO4|PPTP|ESP|IKE|SIP|JABBER|CU/SeeMe|
RAUDIO(PNA)|RTSP|ILS|H245|H323|IRC|DHCP|
GAME(UDP)|CONE(UDP)|LOOSE(UDP)|SNMP_TRAP|FTP}>
[port = <port-range>]

cifs ftp upnpav

contentsharing cifs
Following commands are available :

config : To set CIFS service name, to define CIFS service workgroup

and to enable/disable CIFS service.
list : To display CIFS service context.
contentsharing cifs config
To set CIFS service name, to define CIFS service workgroup and to
enable/disable CIFS service.
Syntax : config [state = <{enabled|disabled}>] [workgroup = <quoted string>]
[name = <quoted string>] [comment = <quoted string>]

Parameters :
[state = <{enabled|disabled}>]
Enabled/disabled CIFS service.
[workgroup = <quoted string>]
CIFS workgroup definition.
[name = <quoted string>]
CIFS service name.
[comment = <quoted string>]
CIFS service description.
contentsharing cifs list
To display CIFS service context.
Syntax : list
contentsharing ftp
Following commands are available :

config : To enable/disable FTP service.

list : To display FTP service context.
contentsharing ftp config
To enable/disable FTP service.
Syntax : config [state = <{enabled|disabled}>]

Parameters :
[state = <{enabled|disabled}>]
Enabled/disabled FTP service.
contentsharing ftp list
To display FTP service context.
Syntax : list
[HIDDEN]contentsharing upnp
Following commands are available :

config : To enable/disable UPnPAV service, to set the friendly name.

list : To display UPnPAV service context.

Following command groups are available :

radiostation
contentsharing upnp config
To enable/disable UPnPAV service, to set the friendly name.
Syntax : config [state = <{enabled|disabled}>]
[friendlyname = <quoted string>]

Parameters :
[state = <{enabled|disabled}>]
Enable/disable UPnPAV service.
[friendlyname = <quoted string>]
upnpav friendly name.
contentsharing upnp list
To display UPnPAV service context.
Syntax : list
contentsharing upnp radiostation
Following commands are available :

config : To enable/disable radiostations service.

list : To display radiostations service context.

Following command groups are available :

station
contentsharing upnp radiostation config
To enable/disable radiostations service.
Syntax : config [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enabled/disabled radiostations service.
contentsharing upnp radiostation list
To display radiostations service context.
Syntax : list
contentsharing upnp radiostation station
Following commands are available :

add : Add an option.

delete : Delete an option.
list : List all options.
contentsharing upnp radiostation station add
Add an option.
Syntax : add name = <string> url = <string>

Parameters :
name = <string>
station name.
url = <string>
station url
contentsharing upnp radiostation station delete
Delete an option.
Syntax : delete name = <string>

Parameters :
name = <string>
station name.
contentsharing upnp radiostation station list
List all options.
Syntax : list
contentsharing upnpav
Following commands are available :

config : To enable/disable UPnPAV service, to set the friendly name.

list : To display UPnPAV service context.

Following command groups are available :

radiostation
contentsharing upnpav config
To enable/disable UPnPAV service, to set the friendly name.
Syntax : config [state = <{enabled|disabled}>]
[friendlyname = <quoted string>]

Parameters :
[state = <{enabled|disabled}>]
Enable/disable UPnPAV service.
[friendlyname = <quoted string>]
upnpav friendly name.
contentsharing upnpav list
To display UPnPAV service context.
Syntax : list
contentsharing upnpav radiostation
Following commands are available :

config : To enable/disable radiostations service.

list : To display radiostations service context.

Following command groups are available :

station
contentsharing upnpav radiostation config
To enable/disable radiostations service.
Syntax : config [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enabled/disabled radiostations service.
contentsharing upnpav radiostation list
To display radiostations service context.
Syntax : list
contentsharing upnpav radiostation station
Following commands are available :

add : Add an option.

delete : Delete an option.
list : List all options.
contentsharing upnpav radiostation station add
Add an option.
Syntax : add name = <string> url = <string>

Parameters :
name = <string>
station name.
url = <string>
station url
contentsharing upnpav radiostation station delete
Delete an option.
Syntax : delete name = <string>

Parameters :
name = <string>
station name.
contentsharing upnpav radiostation station list
List all options.
Syntax : list
cwmp
Following commands are available :

config : Configure the cwmpd as seen from the ACS.

Following command groups are available :

debug notification server

[HIDDEN]cwmp cmd
TR69 Methods.
Syntax : cmd

Parameters :
cwmp config
Configure the cwmpd as seen from the ACS.
Syntax : config [state = <{disabled|enabled}>] [mode = <{read-only|full}>]
[periodicInform = <{disabled|enabled}>]
[periodicInfInt = <number>] [periodicInfTime = <string>]
[sessionTimeout = <number>] [noIpTimeout = <number>]
[maxEnvelopes = <number>]
[connectionRequest = <{disabled|enabled}>]
[connectionReqPath = <string>]
[connectionReqUserName = <quoted string>]
[connectionReqPsswd = <password>]
[connectionReqAuth = <{none|basic|digest}>]
[bootdelayrange = <number>]
[upgradedelay = <{disabled|enabled}>]
[delaytimeoutaction = <{force|cancel}>]
[am1Termination = <{disabled|enabled}>]
[persistentSubscription = <{disabled|enabled}>]
[connectionReqThrotNumber = <number>]
[connectionReqThrotTime = <number>]
[showPasswords = <{disabled|enabled}>] [urlSource = <{none}>]

Parameters :
[state = <{disabled|enabled}>]
The state of the cwmp daemon.
[mode = <{read-only|full}>]
Set the operation mode of the cwmp daemon.
[periodicInform = <{disabled|enabled}>]
Set periodicInform flag of the cwmp daemon.
[periodicInfInt = <number>]
Set the interval between two periodicInform messages in seconds.
[periodicInfTime = <string>]
Set the UTC time the periodic inform will be synchronized upon.
[sessionTimeout = <number>]
Set HTTP session-timeout in seconds.
[noIpTimeout = <number>]
Set time (in seconds) ip may be 0 after uploading new config file. Modem
will step back to old configuration when timeout is reached.
[maxEnvelopes = <number>]
Set the maximum number of SOAP envelopes send within one http-message.
[connectionRequest = <{disabled|enabled}>]
Set connection request flag of the cwmp daemon.
[connectionReqPath = <string>]
Set the path where the cwmp daemon can be reached.
[connectionReqUserName = <quoted string>]
Set the username the ACS must use to log in.
[connectionReqPsswd = <password>]
Set the password the ACS must use to log in.
[connectionReqAuth = <{none|basic|digest}>]
Set the authentication type of modem CWMP server for asynchronous
connects.
[bootdelayrange = <number>]
Set the delay on boot before inform is sent.
[upgradedelay = <{disabled|enabled}>]
Set whether to delay upgrade if statecheck is active.
[delaytimeoutaction = <{force|cancel}>]
Set the action to perform when statecheck goes into timeout.
[am1Termination = <{disabled|enabled}>]
Set if am 1 session termination is enabled.
[persistentSubscription = <{disabled|enabled}>]
The cwmp daemon has persistent subscriptions.
[connectionReqThrotNumber = <number>]
Set the connection request throttling maximum number of accepted requests
within period.
[connectionReqThrotTime = <number>]
Set the connection request throttling period in seconds in which max
requests is reached.
[showPasswords = <{disabled|enabled}>]
Show all passwords in IGD as plaintext. When 0 then will be emptie
stringed as the standard requests.
[urlSource = <{none}>]
The name of DHCP client which the URL comes from.
[rpcupload = <{(HIDDEN)}>]
(HIDDEN)
cwmp debug
Following commands are available :

traceconfig : Enable or disable tracing.

cwmp debug traceconfig
Enable or disable tracing.
Syntax : traceconfig [level = <number>]

Parameters :
[level = <number>]
Set the tracelevel (0-2).
cwmp notification
[HIDDEN]cwmp notification notifiedparameter
a notified parameter waiting to be send
Syntax : notifiedparameter [name = <quoted string>]

Parameters :
[name = <quoted string>]
Set the notification path
[HIDDEN]cwmp notification rule
a rule which defines a notification
Syntax : rule [notification = <{off|passive|active|forced|inform}>]
[name = <quoted string>] [keystring = <number>]

Parameters :
[notification = <{off|passive|active|forced|inform}>]
Set the type of notification
[name = <quoted string>]
Set the notification path
[keystring = <number>]
The keystring_id of the notification rule
[HIDDEN]cwmp runtimevar
Runtime variable modifications.
Syntax : runtimevar

Parameters :
cwmp server
Following commands are available :

config : Configure the cwmpd towards the ACS.

cwmp server config
Configure the cwmpd towards the ACS.
Syntax : config [url = <string>] [username = <string>]
[password = <password>]

Parameters :
[url = <string>]
Set the HTTP URL used to contact the ACS server.
[username = <string>]
Set the username for ACS Digest Authentication.
[password = <password>]
Set the password for ACS Digest Authentication.
debug
Following commands are available :

exec : Execute a 'Trace & Debug' command. For qualified personnel

only.
[HIDDEN]debug dmesg
Show the Linux kernel messages. For qualifies personnel only.
Syntax : dmesg
debug exec
Execute a 'Trace & Debug' command. For qualified personnel only.
Syntax : exec cmd = <quoted string>

Parameters :
cmd = <quoted string>
Quoted 'Trace & Debug' command string
dhcp
Following command groups are available :

client relay rule server spoofing

dhcp client
Following commands are available :

ifadd : Create a DHCP client.

ifattach : Activate a DHCP client.
ifconfig : Configure a DHCP client.
ifdelete : Delete a DHCP client.
ifdetach : De-activate a DHCP client and releases its lease.
iflist : List DHCP clients.
ifrenew : Renew a DHCP lease.
flush : Delete all DHCP clients.

Following command groups are available :

debug rqoptions txoptions

dhcp client debug
Following commands are available :

traceconfig : Modify DHCP client trace configuration

stats : Print DHCP client statistics
clear : Clear DHCP client statistics
dhcp client debug clear
Clear DHCP client statistics
Syntax : clear
dhcp client debug stats
Print DHCP client statistics
Syntax : stats
dhcp client debug traceconfig
Modify DHCP client trace configuration
Syntax : traceconfig [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable tracing.
dhcp client flush
Delete all DHCP clients.
Syntax : flush
dhcp client ifadd
Create a DHCP client.
Syntax : ifadd intf = <{Internet|LocalNetwork}>

Parameters :
intf = <{Internet|LocalNetwork}>
The name of the interface on which a DHCP Client is defined.
dhcp client ifattach
Activate a DHCP client.
Syntax : ifattach intf = <>

Parameters :
intf = <>
The name of the interface on which a DHCP Client is defined.
dhcp client ifconfig
Configure a DHCP client.
Syntax : ifconfig intf = <>
[label = <{None|DSCP|Interactive|Management|SIPS_RTP|
SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default|voice-
only}>]
[metric = <number{0-255}>] [dnsmetric = <number{0-100}>]
[broadcast = <{disabled|enabled}>]
[serverroute = <{disabled|enabled}>]
[followlabel = <{disabled|enabled}>]

Parameters :
intf = <>
The name of the dynamic interface to be configured.
[label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-
RTP|VoIP-Signal|default|voice-only}>]
Label for default gateway and static routes.
[metric = <number{0-255}>]
Route metric for default gateway and static routes.
[dnsmetric = <number{0-100}>]
DNS route metric.
[broadcast = <{disabled|enabled}>]
Operate client in unicast/broadcast mode.
[serverroute = <{disabled|enabled}>]
Insert a route for the DHCP server IP
[followlabel = <{disabled|enabled}>]
If enabled the DHCP client's unicast traffic will follow the route label
specified. If disabled DHCP unicast traffic will follow standard routes
[clientid = <{(HIDDEN)}>]
(HIDDEN)
[hostname = <{(HIDDEN)}>]
(HIDDEN)
[vendor = <{(HIDDEN)}>]
(HIDDEN)
[userid = <{(HIDDEN)}>]
(HIDDEN)
[addr = <{(HIDDEN)}>]
(HIDDEN)
[leasetime = <{(HIDDEN)}>]
(HIDDEN)
[domain = <{(HIDDEN)}>]
(HIDDEN)
[dns = <{(HIDDEN)}>]
(HIDDEN)
[statrt = <{(HIDDEN)}>]
(HIDDEN)
[gateway = <{(HIDDEN)}>]
(HIDDEN)
dhcp client ifdelete
Delete a DHCP client.
Syntax : ifdelete intf = <>

Parameters :
intf = <>
The name of the interface on which a DHCP Client is defined.
dhcp client ifdetach
De-activate a DHCP client and releases its lease.
Syntax : ifdetach intf = <>

Parameters :
intf = <>
The name of the interface on which a DHCP Client is defined.
dhcp client iflist
List DHCP clients.
Syntax : iflist [intf = <>] [expand = <{disabled|enabled}>]

Parameters :
[intf = <>]
The name of the interface on which a DHCP Client is defined.
[expand = <{disabled|enabled}>]
Expand enabled/disabled.
dhcp client ifrenew
Renew a DHCP lease.
Syntax : ifrenew intf = <>

Parameters :
intf = <>
The name of the interface on which a DHCP Client is defined.
dhcp client rqoptions
Following commands are available :

add : Add a DHCP Option Code to the Parameter Request List.

delete : Delete a DHCP Option Code from the Parameter Request List.
list : List all DHCP Option Codes in the Parameter Request List.
optionlist : List all DHCP Option Codes that can be used in the
Parameter Request List.
dhcp client rqoptions add
Add a DHCP Option Code to the Parameter Request List.
Syntax : add intf = <>
option = <{subnet-mask|time-offset|default-routers|time-servers|
ien116-name-servers|domain-name-servers|log-servers|
cookie-servers|lpr-servers|impress-servers|resource-
location-servers|host-name|boot-file-size|merit-dump|
domain-name|swap-server|root-path|extensions-path|ip-
forwarding|non-local-source-routing|policy-filter|max-
dgram-reassembly|default-ip-ttl|path-mtu-aging-timeout|
path-mtu-plateau-table|interface-mtu|all-subnets-local|
broadcast-address|perform-mask-discovery|mask-supplier|
router-discovery|router-solicitation-address|classfull-
static-routes|trailer-encapsulation|arp-cache-timeout|
ieee802-3-encapsulation|default-tcp-ttl|tcp-keepalive-
interval|tcp-keepalive-garbage|nis-domain|nis-servers|
ntp-servers|vendor-specific_info|netbios-name-servers|
netbios-dd-server|netbios-node-type|netbios-scope|font-
servers|x-display-manager|dhcp-lease-time|dhcp-server-
identifier|dhcp-parameter-request-list|dhcp-renewal-time|
dhcp-rebinding-time|nwip-domain|nwip-suboptions|nisplus-
domain|nisplus-servers|tftp-server-name|bootfile-name|
mobile-ip-home-agent|smtp-server|pop-server|nntp-server|
www-server|finger-server|irc-server|streettalk-server|
streettalk-directory-assistance-server|slp-directory-
agent|slp-service-scope|rapid_commit|client-fqdn|
internet-storage-name-servers|#84|nds-servers|nds-tree-
name|nds-context|#88|#89|dhcp-msg-authentication|client-
last-transaction-time|...} or number>
[index = <number{0-255}>]

Parameters :
intf = <>
The name of the interface on which a DHCP Client is defined.
option = <{subnet-mask|time-offset|default-routers|time-servers|ien116-name-
servers|domain-name-servers|log-servers|cookie-servers|lpr-servers|
impress-servers|resource-location-servers|host-name|boot-file-size|
merit-dump|domain-name|swap-server|root-path|extensions-path|ip-
forwarding|non-local-source-routing|policy-filter|max-dgram-
reassembly|default-ip-ttl|path-mtu-aging-timeout|path-mtu-plateau-
table|interface-mtu|all-subnets-local|broadcast-address|perform-
mask-discovery|mask-supplier|router-discovery|router-solicitation-
address|classfull-static-routes|trailer-encapsulation|arp-cache-
timeout|ieee802-3-encapsulation|default-tcp-ttl|tcp-keepalive-
interval|tcp-keepalive-garbage|nis-domain|nis-servers|ntp-servers|
vendor-specific_info|netbios-name-servers|netbios-dd-server|
netbios-node-type|netbios-scope|font-servers|x-display-manager|
dhcp-lease-time|dhcp-server-identifier|dhcp-parameter-request-list|
dhcp-renewal-time|dhcp-rebinding-time|nwip-domain|nwip-suboptions|
nisplus-domain|nisplus-servers|tftp-server-name|bootfile-name|
mobile-ip-home-agent|smtp-server|pop-server|nntp-server|www-server|
finger-server|irc-server|streettalk-server|streettalk-directory-
assistance-server|slp-directory-agent|slp-service-scope|
rapid_commit|client-fqdn|internet-storage-name-servers|#84|nds-
servers|nds-tree-name|nds-context|#88|#89|dhcp-msg-authentication|
client-last-transaction-time|...} or number>
The name or number of the option.
[index = <number{0-255}>]
The index of the option.
dhcp client rqoptions delete
Delete a DHCP Option Code from the Parameter Request List.
Syntax : delete intf = <>
option = <{subnet-mask|time-offset|default-routers|time-
servers|ien116-name-servers|domain-name-servers|log-
servers|cookie-servers|lpr-servers|impress-servers|
resource-location-servers|host-name|boot-file-size|
merit-dump|domain-name|swap-server|root-path|
extensions-path|ip-forwarding|non-local-source-
routing|policy-filter|max-dgram-reassembly|default-ip-
ttl|path-mtu-aging-timeout|path-mtu-plateau-table|
interface-mtu|all-subnets-local|broadcast-address|
perform-mask-discovery|mask-supplier|router-discovery|
router-solicitation-address|classfull-static-routes|
trailer-encapsulation|arp-cache-timeout|ieee802-3-
encapsulation|default-tcp-ttl|tcp-keepalive-interval|
tcp-keepalive-garbage|nis-domain|nis-servers|ntp-
servers|vendor-specific_info|netbios-name-servers|
netbios-dd-server|netbios-node-type|netbios-scope|
font-servers|x-display-manager|dhcp-lease-time|dhcp-
server-identifier|dhcp-parameter-request-list|dhcp-
renewal-time|dhcp-rebinding-time|nwip-domain|nwip-
suboptions|nisplus-domain|nisplus-servers|tftp-server-
name|bootfile-name|mobile-ip-home-agent|smtp-server|
pop-server|nntp-server|www-server|finger-server|irc-
server|streettalk-server|streettalk-directory-
assistance-server|slp-directory-agent|slp-service-
scope|rapid_commit|client-fqdn|internet-storage-name-
servers|#84|nds-servers|nds-tree-name|nds-context|#88|
#89|dhcp-msg-authentication|client-last-transaction-
time|...} or number>

Parameters :
[intf = <>]
The name of the interface on which a DHCP Client is defined.
dhcp client rqoptions optionlist
List all DHCP Option Codes that can be used in the Parameter Request List.
Syntax : optionlist
dhcp client txoptions
Following commands are available :

add : Add an option.

delete : Delete an option.
list : List all options.
optionlist : Lists all DHCP Option Codes that can be used.
dhcp client txoptions add
Add an option.
Syntax : add intf = <>
option = <{subnet-mask|time-offset|default-routers|time-servers|
ien116-name-servers|domain-name-servers|log-servers|
cookie-servers|lpr-servers|impress-servers|resource-
location-servers|host-name|boot-file-size|merit-dump|
domain-name|swap-server|root-path|extensions-path|ip-
forwarding|non-local-source-routing|policy-filter|max-
dgram-reassembly|default-ip-ttl|path-mtu-aging-timeout|
path-mtu-plateau-table|interface-mtu|all-subnets-local|
broadcast-address|perform-mask-discovery|mask-supplier|
router-discovery|router-solicitation-address|classfull-
static-routes|trailer-encapsulation|arp-cache-timeout|
ieee802-3-encapsulation|default-tcp-ttl|tcp-keepalive-
interval|tcp-keepalive-garbage|nis-domain|nis-servers|
ntp-servers|netbios-name-servers|netbios-dd-server|
netbios-node-type|netbios-scope|font-servers|x-display-
manager|dhcp-requested-address|dhcp-lease-time|dhcp-
option-overload|dhcp-max-message-size|dhcp-renewal-time|
dhcp-rebinding-time|vendor-class-id|dhcp-client-
identifier|nwip-domain|nwip-suboptions|nisplus-domain|
nisplus-servers|tftp-server-name|bootfile-name|mobile-ip-
home-agent|smtp-server|pop-server|nntp-server|www-server|
finger-server|irc-server|streettalk-server|streettalk-
directory-assistance-server|user-class-identifier|slp-
directory-agent|slp-service-scope|rapid_commit|client-
fqdn|internet-storage-name-servers|#84|nds-servers|nds-
tree-name|nds-context|#88|#89|...} or number>
[enterprise = <number{1-2147483647}>]
[suboption = <number{1-254}>]
value = <Value : (type)value; type being 8-bit, 16-bit, 32-bit,
addr, ascii, byte_array, clientid, env
>
[index = <number{0-255}>]

Parameters :
intf = <>
The name of the interface on which a DHCP Client is defined.
option = <{subnet-mask|time-offset|default-routers|time-servers|ien116-name-
servers|domain-name-servers|log-servers|cookie-servers|lpr-servers|
impress-servers|resource-location-servers|host-name|boot-file-size|
merit-dump|domain-name|swap-server|root-path|extensions-path|ip-
forwarding|non-local-source-routing|policy-filter|max-dgram-
reassembly|default-ip-ttl|path-mtu-aging-timeout|path-mtu-plateau-
table|interface-mtu|all-subnets-local|broadcast-address|perform-
mask-discovery|mask-supplier|router-discovery|router-solicitation-
address|classfull-static-routes|trailer-encapsulation|arp-cache-
timeout|ieee802-3-encapsulation|default-tcp-ttl|tcp-keepalive-
interval|tcp-keepalive-garbage|nis-domain|nis-servers|ntp-servers|
netbios-name-servers|netbios-dd-server|netbios-node-type|netbios-
scope|font-servers|x-display-manager|dhcp-requested-address|dhcp-
lease-time|dhcp-option-overload|dhcp-max-message-size|dhcp-renewal-
time|dhcp-rebinding-time|vendor-class-id|dhcp-client-identifier|
nwip-domain|nwip-suboptions|nisplus-domain|nisplus-servers|tftp-
server-name|bootfile-name|mobile-ip-home-agent|smtp-server|pop-
server|nntp-server|www-server|finger-server|irc-server|streettalk-
server|streettalk-directory-assistance-server|user-class-
identifier|slp-directory-agent|slp-service-scope|rapid_commit|
client-fqdn|internet-storage-name-servers|#84|nds-servers|nds-tree-
name|nds-context|#88|#89|...} or number>
The name or number of the option.
[enterprise = <number{1-2147483647}>]
The enterprise number (see http://www.iana.org/assignments/enterprise-
numbers)
[suboption = <number{1-254}>]
The suboption number
value = <Value : (type)value; type being 8-bit, 16-bit, 32-bit, addr,
ascii, byte_array, clientid, env
>
The value of the option.
[index = <number{0-255}>]
The index of the (sub)option/enterprise number in the Option List.
dhcp client txoptions delete
Delete an option.
Syntax : delete intf = <>
option = <{subnet-mask|time-offset|default-routers|time-
servers|ien116-name-servers|domain-name-servers|log-
servers|cookie-servers|lpr-servers|impress-servers|
resource-location-servers|host-name|boot-file-size|
merit-dump|domain-name|swap-server|root-path|
extensions-path|ip-forwarding|non-local-source-
routing|policy-filter|max-dgram-reassembly|default-ip-
ttl|path-mtu-aging-timeout|path-mtu-plateau-table|
interface-mtu|all-subnets-local|broadcast-address|
perform-mask-discovery|mask-supplier|router-discovery|
router-solicitation-address|classfull-static-routes|
trailer-encapsulation|arp-cache-timeout|ieee802-3-
encapsulation|default-tcp-ttl|tcp-keepalive-interval|
tcp-keepalive-garbage|nis-domain|nis-servers|ntp-
servers|netbios-name-servers|netbios-dd-server|
netbios-node-type|netbios-scope|font-servers|x-
display-manager|dhcp-requested-address|dhcp-lease-
time|dhcp-option-overload|dhcp-max-message-size|dhcp-
renewal-time|dhcp-rebinding-time|vendor-class-id|dhcp-
client-identifier|nwip-domain|nwip-suboptions|nisplus-
domain|nisplus-servers|tftp-server-name|bootfile-name|
mobile-ip-home-agent|smtp-server|pop-server|nntp-
server|www-server|finger-server|irc-server|streettalk-
server|streettalk-directory-assistance-server|user-
class-identifier|slp-directory-agent|slp-service-
scope|rapid_commit|client-fqdn|internet-storage-name-
servers|#84|nds-servers|nds-tree-name|nds-context|#88|
#89|...} or number>
[enterprise = <number{1-2147483647}>]
[suboption = <number{1-254}>]

Parameters :
[intf = <>]
The name of the interface on which a DHCP Client is defined.
[expand = <{disabled|enabled}>]
Expand enabled/disabled.
dhcp client txoptions optionlist
Lists all DHCP Option Codes that can be used.
Syntax : optionlist
dhcp relay
Following commands are available :

ifconfig : Configure a relay interface.

iflist : Show the configuration of the relay interfaces.
add : Add an entry to the DHCP forward list.
delete : Delete an entry from the DHCP forward list.
modify : Modify an entry from the DHCP forward list.
list : List the DHCP forward list.
ruleadd : Add a selection rule to a DHCP forward entry
ruledelete : Delete a selection rule from a DHCP forward entry
config : Sets the relay configuration settings.
flush : Flushes the DHCP relay settings.

Following command groups are available :

debug
dhcp relay add
Add an entry to the DHCP forward list.
Syntax : add name = <string>

Parameters :
name = <string>
The forward entry name.
dhcp relay config
Sets the relay configuration settings.
Syntax : config [agentinfo = <{disabled|enabled}>]
[agentmismatch = <{disabled|enabled}>]

Parameters :
[agentinfo = <{disabled|enabled}>]
Set the relay agent info status (RFC3046).
[agentmismatch = <{disabled|enabled}>]
Forward/Drop DHCP reply packet when a relay agent info mismatch is
detected (RFC3046).
dhcp relay debug
Following commands are available :

traceconfig : Modify DHCP relay trace configuration

stats : Print DHCP relay statistics.
dhcp relay debug stats
Print DHCP relay statistics.
Syntax : stats
dhcp relay debug traceconfig
Modify DHCP relay trace configuration
Syntax : traceconfig [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable tracing.
dhcp relay delete
Delete an entry from the DHCP forward list.
Syntax : delete name = <{LocalNetwork_to_127.0.0.1}>

Parameters :
name = <{LocalNetwork_to_127.0.0.1}>
The forward entry name.
dhcp relay flush
Flushes the DHCP relay settings.
Syntax : flush
dhcp relay ifconfig
Configure a relay interface.
Syntax : ifconfig intf = <{LocalNetwork|Internet}>
[relay = <{disabled|enabled}>] [maxhops = <number{0-16}>]
[remoteid = <password>] [trusted = <{disabled|enabled}>]

Parameters :
intf = <{LocalNetwork|Internet}>
The name of the relay interface to configure.
[relay = <{disabled|enabled}>]
Set the relay status.
[maxhops = <number{0-16}>]
Set the maximum number of hops allowed in the DHCP packet.
[remoteid = <password>]
Set the remote id as specified in RFC3046.
[trusted = <{disabled|enabled}>]
Drop/Forward DHCP request packet when a relay agent info option is
present and the giaddr field is 0 (RFC3046).
dhcp relay iflist
Show the configuration of the relay interfaces.
Syntax : iflist [intf = <{LocalNetwork|Internet}>]

Parameters :
[intf = <{LocalNetwork|Internet}>]
The name of the relay interface.
dhcp relay list
List the DHCP forward list.
Syntax : list [name = <{LocalNetwork_to_127.0.0.1}>]

Parameters :
[name = <{LocalNetwork_to_127.0.0.1}>]
The forward entry name.
dhcp relay modify
Modify an entry from the DHCP forward list.
Syntax : modify name = <{LocalNetwork_to_127.0.0.1}> [addr = <ip-address>]
[intf = <{None|LocalNetwork|Internet}>]
[giaddr = <ip-address>] [script = <>]

Parameters :
name = <{LocalNetwork_to_127.0.0.1}>
The forward entry name.
[addr = <ip-address>]
The DHCP server IP address.
[intf = <{None|LocalNetwork|Internet}>]
The name of the relay interface, 'None' to indicate no interface is
specified.
[giaddr = <ip-address>]
The giaddr field to be used in relayed DHCP packets.
[script = <>]
Script to be run when the forward entry is hit.
dhcp relay ruleadd
Add a selection rule to a DHCP forward entry
Syntax : ruleadd name = <{LocalNetwork_to_127.0.0.1}> [key = <{or|and}>]
rulename = <>

Parameters :
name = <{LocalNetwork_to_127.0.0.1}>
The name of the forward entry.
[key = <{or|and}>]
The logical key of the selection rule.
rulename = <>
The name of the DHCP selection rule.
dhcp relay ruledelete
Delete a selection rule from a DHCP forward entry
Syntax : ruledelete name = <{LocalNetwork_to_127.0.0.1}> rulename = <>

Parameters :
name = <{LocalNetwork_to_127.0.0.1}>
The name of the forward entry.
rulename = <>
The name of the DHCP selection rule.
dhcp rule
Following commands are available :

add : Add a rule for DHCP conditional selection

delete : Delete a DHCP rule
list : List all DHCP rules
flush : Flush all DHCP rules

Following command groups are available :

debug
dhcp rule add
Add a rule for DHCP conditional selection
Syntax : add name = <string> type = <{option|mac|root}>
option [!]= <{subnet-mask|time-offset|default-routers|time-
servers|ien116-name-servers|domain-name-servers|log-
servers|cookie-servers|lpr-servers|impress-servers|
resource-location-servers|host-name|boot-file-size|
merit-dump|domain-name|swap-server|root-path|
extensions-path|ip-forwarding|non-local-source-
routing|policy-filter|max-dgram-reassembly|default-ip-
ttl|path-mtu-aging-timeout|path-mtu-plateau-table|
interface-mtu|all-subnets-local|broadcast-address|
perform-mask-discovery|mask-supplier|router-discovery|
router-solicitation-address|classfull-static-routes|
trailer-encapsulation|arp-cache-timeout|ieee802-3-
encapsulation|default-tcp-ttl|tcp-keepalive-interval|
tcp-keepalive-garbage|nis-domain|nis-servers|ntp-
servers|vendor-specific_info|netbios-name-servers|
netbios-dd-server|netbios-node-type|netbios-scope|
font-servers|x-display-manager|requested-ip|dhcp-
lease-time|dhcp-overload-indication|dhcp-msg-type|
dhcp-server-identifier|dhcp-parameter-request-list|
dhcp-text-msg|dhcp-max-msg-size|dhcp-renewal-time|
dhcp-rebinding-time|vendor-class-identifier|client-
identifier|nwip-domain|nwip-suboptions|nisplus-domain|
nisplus-servers|tftp-server-name|bootfile-name|mobile-
ip-home-agent|smtp-server|pop-server|nntp-server|www-
server|finger-server|irc-server|streettalk-server|
streettalk-directory-assistance-server|user-class-
identifier|slp-directory-agent|slp-service-scope|...}
or number>
[enterprise = <number{1-2147483647}>]
[suboption = <number{1-254}>]
[value = <Value : (type)value; type being addr, ascii,
byte_array, clientid, env
>]
[match = <{exactly|as_substring}>]
mac [!]= <hardware-address with wildcard ex: '00:9f:aa:*:*:*'>
[key = <{or|and}>] subrule = <>

Parameters :
name = <string>
The name of the DHCP rule.
type = <{option|mac|root}>
Specify the DHCP rule type.
option [!]= <{subnet-mask|time-offset|default-routers|time-servers|ien116-
name-servers|domain-name-servers|log-servers|cookie-servers|lpr-
servers|impress-servers|resource-location-servers|host-name|
boot-file-size|merit-dump|domain-name|swap-server|root-path|
extensions-path|ip-forwarding|non-local-source-routing|policy-
filter|max-dgram-reassembly|default-ip-ttl|path-mtu-aging-
timeout|path-mtu-plateau-table|interface-mtu|all-subnets-local|
broadcast-address|perform-mask-discovery|mask-supplier|router-
discovery|router-solicitation-address|classfull-static-routes|
trailer-encapsulation|arp-cache-timeout|ieee802-3-encapsulation|
default-tcp-ttl|tcp-keepalive-interval|tcp-keepalive-garbage|
nis-domain|nis-servers|ntp-servers|vendor-specific_info|netbios-
name-servers|netbios-dd-server|netbios-node-type|netbios-scope|
font-servers|x-display-manager|requested-ip|dhcp-lease-time|
dhcp-overload-indication|dhcp-msg-type|dhcp-server-identifier|
dhcp-parameter-request-list|dhcp-text-msg|dhcp-max-msg-size|
dhcp-renewal-time|dhcp-rebinding-time|vendor-class-identifier|
client-identifier|nwip-domain|nwip-suboptions|nisplus-domain|
nisplus-servers|tftp-server-name|bootfile-name|mobile-ip-home-
agent|smtp-server|pop-server|nntp-server|www-server|finger-
server|irc-server|streettalk-server|streettalk-directory-
assistance-server|user-class-identifier|slp-directory-agent|slp-
service-scope|...} or number>
The name or number of the option.
[enterprise = <number{1-2147483647}>]
The enterprise number (see http://www.iana.org/assignments/enterprise-
numbers)
[suboption = <number{1-254}>]
The suboption number
[value = <Value : (type)value; type being addr, ascii, byte_array,
clientid, env
>]
The value of the option.
[match = <{exactly|as_substring}>]
The option value matching.
mac [!]= <hardware-address with wildcard ex: '00:9f:aa:*:*:*'>
The mac address.
[key = <{or|and}>]
The logical key of the subrule.
subrule = <>
The name of the DHCP subrule.
dhcp rule debug
Following commands are available :

traceconfig : Modify DHCP rule trace configuration

dhcp rule debug traceconfig
Modify DHCP rule trace configuration
Syntax : traceconfig [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable tracing.
dhcp rule delete
Delete a DHCP rule
Syntax : delete name = <> subrule = <>

Parameters :
name = <>
The name of the DHCP rule.
subrule = <>
The name of the DHCP subrule.
dhcp rule flush
Flush all DHCP rules
Syntax : flush
dhcp rule list
List all DHCP rules
Syntax : list
dhcp server
Following commands are available :

config : Print DHCP server configuration settings

policy : Print DHCP server policy settings
flush : Flush all DHCP server pool and lease entries

Following command groups are available :

debug lease option pool

dhcp server config
Print DHCP server configuration settings
Syntax : config [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable the DHCP server.
dhcp server debug
Following commands are available :

traceconfig : Modify DHCP server trace configuration

stats : Print DHCP server statistics
clear : Clear DHCP server statistics
dhcp server debug clear
Clear DHCP server statistics
Syntax : clear
dhcp server debug stats
Print DHCP server statistics
Syntax : stats
dhcp server debug traceconfig
Modify DHCP server trace configuration
Syntax : traceconfig [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable tracing.
dhcp server flush
Flush all DHCP server pool and lease entries
Syntax : flush
dhcp server lease
Following commands are available :

add : Add a DHCP server lease

delete : Delete a DHCP server lease
flush : Flush all DHCP server leases
list : List all DHCP server leases
dhcp server lease add
Add a DHCP server lease
Syntax : add clientid = <clientid> pool = <{LAN_private}>
[addr = <ip-address>] [offset = <number>] [lifetime = <number>]
[leasetime = <number>] [gateway = <ip-address|0|none>]
[macaddr = <hardware-address>]
[allocation = <{automatic|manual}>]

Parameters :
clientid = <clientid>
The DHCP client identification string.
pool = <{LAN_private}>
The name of the DHCP server pool.
[addr = <ip-address>]
The IP address for this client.
[offset = <number>]
The IP address offset in the pool preserved for this client.
[lifetime = <number>]
The time in seconds the DHCP server keeps the lease reserved (tip: 0
means infinite lifetime).
[leasetime = <number>]
The time in seconds the client is allowed to use an address (tip: 0 means
infinite leasetime).
[gateway = <ip-address|0|none>]
The IP address of the default router for this client.
[macaddr = <hardware-address>]
The host MAC address.
[allocation = <{automatic|manual}>]
Define the client IP address allocation method (tip : automatic means the
lease can be recycled).
[expirytime = <{(HIDDEN)}>]
(HIDDEN)
dhcp server lease delete
Delete a DHCP server lease
Syntax : delete [clientid = <clientid>] [index = <number>]

Parameters :
[clientid = <clientid>]
The DHCP client identification string.
[index = <number>]
The DHCP server lease table index.
dhcp server lease flush
Flush all DHCP server leases
Syntax : flush [pool = <{LAN_private}>]

Parameters :
[pool = <{LAN_private}>]
The name of the DHCP server pool. Only the leases belonging to this pool
will be deleted.
dhcp server lease list
List all DHCP server leases
Syntax : list [clientid = <clientid>] [index = <number>]
[expand = <{disabled|enabled}>]

Parameters :
[clientid = <clientid>]
The DHCP client identification string.
[index = <number>]
The DHCP server lease table index.
[expand = <{disabled|enabled}>]
Expand enabled/disabled.
dhcp server option
Following commands are available :

tmpladd : Add a DHCP server option template

tmpldelete : Delete a DHCP server option template
tmpllist : List all DHCP server option templates
instadd : Add a DHCP server option instance
instdelete : Delete a DHCP server option instance
instlist : List all DHCP server option instances
ruleadd : Add a selection rule to a DHCP server option instance
ruledelete : Delete a selection rule from a DHCP server option instance
flush : Flush all DHCP server option templates and instances
dhcp server option flush
Flush all DHCP server option templates and instances
Syntax : flush
dhcp server option instadd
Add a DHCP server option instance
Syntax : instadd name = <string> tmplname = <>
[policy = <{requested|always|rules}>]
[dynamic = <{disabled|enabled}>] [maxuse = <number{1-255}>]
[enterprise = <number{1-2147483647}>]
[suboption = <number{1-254}>]
value = <Value : (type)value; type being 8-bit, 16-bit, 32-
bit, addr, ascii, byte_array, env
>

Parameters :
name = <string>
The name of the DHCP server option instance.
tmplname = <>
The name of the DHCP server option template.
[policy = <{requested|always|rules}>]
The transmit policy type for the DHCP server option instance.
[dynamic = <{disabled|enabled}>]
Enable/Disable option instance as dynamic.
[maxuse = <number{1-255}>]
Maximum number of times an option instance can be used in DHCP pools
[enterprise = <number{1-2147483647}>]
The enterprise number (see http://www.iana.org/assignments/enterprise-
numbers)
[suboption = <number{1-254}>]
The suboption number
value = <Value : (type)value; type being 8-bit, 16-bit, 32-bit, addr,
ascii, byte_array, env
>
The value of the DHCP server option instance.
dhcp server option instdelete
Delete a DHCP server option instance
Syntax : instdelete name = <> [enterprise = <number{1--1}>]
[suboption = <number{1-254}>]

Parameters :
name = <>
The name of the DHCP server option instance.
[enterprise = <number{1--1}>]
The enterprise number (see http://www.iana.org/assignments/enterprise-
numbers)
[suboption = <number{1-254}>]
The suboption number
dhcp server option instlist
List all DHCP server option instances
Syntax : instlist [name = <>]

Parameters :
[name = <>]
The name of the DHCP server option instance.
dhcp server option ruleadd
Add a selection rule to a DHCP server option instance
Syntax : ruleadd name = <> [key = <{or|and}>] rulename = <>

Parameters :
name = <>
The name of the DHCP server option instance.
[key = <{or|and}>]
The logical key of the selection rule.
rulename = <>
The name of the DHCP selection rule.
dhcp server option ruledelete
Delete a selection rule from a DHCP server option instance
Syntax : ruledelete name = <> rulename = <>

Parameters :
name = <>
The name of the DHCP server option instance.
rulename = <>
The name of the DHCP selection rule.
dhcp server option tmpladd
Add a DHCP server option template
Syntax : tmpladd name = <string> optionid = <number{1-254}>
[dynamic = <{disabled|enabled}>]

Parameters :
name = <string>
The name of the DHCP server option template.
optionid = <number{1-254}>
Specify the DHCP server option code.
[dynamic = <{disabled|enabled}>]
Enable/Disable option template as dynamic.
[type = <{(HIDDEN)}>]
(HIDDEN)
dhcp server option tmpldelete
Delete a DHCP server option template
Syntax : tmpldelete name = <>

Parameters :
name = <>
The name of the DHCP server option template.
dhcp server option tmpllist
List all DHCP server option templates
Syntax : tmpllist
dhcp server policy
Print DHCP server policy settings
Syntax : policy [verifyfirst = <{disabled|enabled}>]
[trustclient = <{disabled|enabled}>]
[rtbehaviour = <{traditional|standard|msft}>]
[ackinform = <{disabled|enabled}>]

Parameters :
[verifyfirst = <{disabled|enabled}>]
Enable/Disable IP address conflict network probing before handing out an
address to a client.
[trustclient = <{disabled|enabled}>]
Whether or not the IP address suggested by a DHCP client should be taken
into account.
[rtbehaviour = <{traditional|standard|msft}>]
Define the DHCP Server's route options behaviour. The options that are
involved are: 3, 33, 121 and 249. "Traditional" will return 3 and/or 33;
"standard" will return 3 and/or 33 or 121; "msft" will return 3 and/or 33
or 121 or 249
[ackinform = <{disabled|enabled}>]
Enable/Disable DHCP inform acknowledgement for an unknown lease
dhcp server pool
Following commands are available :

add : Add a DHCP server pool

config : Configure a DHCP server pool
delete : Delete a DHCP server pool
rtadd : Add a route to the DHCP server pool
rtdelete : Delete a route from the DHCP server pool
optadd : Add an option instance to the DHCP server pool
optdelete : Delete an option instance from the DHCP server pool
ruleadd : Add a selection rule to the DHCP server pool
ruledelete : Delete a selection rule from the DHCP server pool
flush : Flush all DHCP server pools
list : List all DHCP server pools
dhcp server pool add
Add a DHCP server pool
Syntax : add name = <string> [index = <number>]

Parameters :
name = <string>
The name of the DHCP server pool.
[index = <number>]
The number of the pool before which you want the new pool to be added.
dhcp server pool config
Configure a DHCP server pool
Syntax : config name = <{LAN_private}> [state = <{disabled|enabled}>]
[allocation = <{dynamic|automatic}>]
[intf = <{Internet|LocalNetwork}>] [index = <number>]
[poolstart = <ip-address>] [poolend = <ip-address>]
[netmask = <ip-mask(dotted or cidr)>]
[gateway = <ip-address|0|none>] [server = <ip-address|none>]
[primdns = <ip-address|none>] [secdns = <ip-address|none>]
[primwins = <ip-address|none>] [secwins = <ip-address|none>]
[leasetime = <number{0-1814400}>]
[renewtime = <number{0-1814400}>]
[rebindtime = <number{0-1814400}>]
[lockouttime = <number{0-1814400}>]
[unnumbered = <{disabled|enabled}>]
[localgw = <{disabled|enabled}>]
[localdns = <{disabled|enabled}>]

Parameters :
name = <{LAN_private}>
The name of the DHCP server pool.
[state = <{disabled|enabled}>]
Enable/Disable the DHCP server pool admin state.
[allocation = <{dynamic|automatic}>]
Define the DHCP Server's pool allocation method (tip : automatic means
the IP address becomes reserved for the lease).
[intf = <{Internet|LocalNetwork}>]
The interface for which the pool is allowed to lease IP addresses.
[index = <number>]
The number of the pool before which you want the new pool to be added.
[poolstart = <ip-address>]
The DHCP server pool start IP address.
[poolend = <ip-address>]
The DHCP server pool end IP address.
[netmask = <ip-mask(dotted or cidr)>]
The DHCP server pool netmask.
[gateway = <ip-address|0|none>]
The IP address of the default router for DHCP clients.
[server = <ip-address|none>]
The IP address of the DHCP server for DHCP clients.
[primdns = <ip-address|none>]
The IP address of the primary DNS server for DHCP clients.
[secdns = <ip-address|none>]
The IP address of the secondary DNS server for DHCP clients.
[primwins = <ip-address|none>]
The IP address of the primary WINS server for DHCP clients.
[secwins = <ip-address|none>]
The IP address of the secondary WINS server for DHCP clients.
[leasetime = <number{0-1814400}>]
The time in seconds a client is allowed to use an address (tip: 0 means
infinite lease).
[renewtime = <number{0-1814400}>]
The time in seconds before a client switches to renewing.
[rebindtime = <number{0-1814400}>]
The time in seconds before a client switches to rebinding.
[lockouttime = <number{0-1814400}>]
The time in seconds before a stopped lease becomes available again (tip:
0 means infinite lockout time).
[unnumbered = <{disabled|enabled}>]
Assign an IP address from this pool to the DHCP server or not (ppp pools
only).
[localgw = <{disabled|enabled}>]
Proxy for a virtual default gateway residing in same subnet of DHCP
client instead of the remote peer address.
[localdns = <{disabled|enabled}>]
Enable/Disable the transmission of the local DNS server in the DNS server
option.
[dnsmetric = <{(HIDDEN)}>]
(HIDDEN)
dhcp server pool delete
Delete a DHCP server pool
Syntax : delete name = <{LAN_private}>

Parameters :
name = <{LAN_private}>
The name of the DHCP server pool.
dhcp server pool flush
Flush all DHCP server pools
Syntax : flush
dhcp server pool list
List all DHCP server pools
Syntax : list [name = <{LAN_private}>]

Parameters :
[name = <{LAN_private}>]
The name of the DHCP server pool.
dhcp server pool optadd
Add an option instance to the DHCP server pool
Syntax : optadd name = <{LAN_private}> instname = <>

Parameters :
name = <{LAN_private}>
The name of the DHCP server pool.
instname = <>
The name of the DHCP server option instance.
dhcp server pool optdelete
Delete an option instance from the DHCP server pool
Syntax : optdelete name = <{LAN_private}> instname = <>

Parameters :
name = <{LAN_private}>
The name of the DHCP server pool.
instname = <>
The name of the DHCP server option instance.
dhcp server pool rtadd
Add a route to the DHCP server pool
Syntax : rtadd name = <{LAN_private}> dst = <ip-address>
[dstmsk = <ip-mask(dotted or cidr)>]
[gateway = <ip-address|0>]

Parameters :
name = <{LAN_private}>
The name of the DHCP server pool.
dst = <ip-address>
The IP destination address of the route for DHCP clients.
[dstmsk = <ip-mask(dotted or cidr)>]
The destination IP address mask.
[gateway = <ip-address|0>]
The IP address of the next hop. Must be directly connected to the DHCP
client
dhcp server pool rtdelete
Delete a route from the DHCP server pool
Syntax : rtdelete name = <{LAN_private}> dst = <ip-address>
[dstmsk = <ip-mask(dotted or cidr)>]
[gateway = <ip-address|0>]

Parameters :
name = <{LAN_private}>
The name of the DHCP server pool.
dst = <ip-address>
The IP destination address of the route for DHCP clients.
[dstmsk = <ip-mask(dotted or cidr)>]
The destination IP address mask.
[gateway = <ip-address|0>]
The IP address of the next hop. Must be directly connected to the DHCP
client
dhcp server pool ruleadd
Add a selection rule to the DHCP server pool
Syntax : ruleadd name = <{LAN_private}> [key = <{or|and}>] rulename = <>

Parameters :
name = <{LAN_private}>
The name of the DHCP server pool.
[key = <{or|and}>]
The logical key of the selection rule.
rulename = <>
The name of the DHCP selection rule.
dhcp server pool ruledelete
Delete a selection rule from the DHCP server pool
Syntax : ruledelete name = <{LAN_private}> rulename = <>

Parameters :
name = <{LAN_private}>
The name of the DHCP server pool.
rulename = <>
The name of the DHCP selection rule.
dhcp spoofing
Following commands are available :

config : Display/modify dhcp spoofing state

add : Add a Spoofing-Association
delete : Delete a Spoofing-Association
attach : Enable a Spoofing-Association
detach : Disable a Spoofing-Association
list : List the available Spoofing-Associations
option-add : Add a DHCP Option Code to a Spoofing-Association.
option-delete : Delete a DHCP Option Code from a Spoofing-Association.
flush : Flush all the associations and the options.

Following command groups are available :

debug
dhcp spoofing add
Add a Spoofing-Association
Syntax : add name = <string> pool_name = <{LAN_private}> ifname = <>

Parameters :
name = <string>
The name of the Association.
pool_name = <{LAN_private}>
The name of the pool to be associated.
ifname = <>
The name of the interface on which a DHCP Client is defined.
dhcp spoofing attach
Enable a Spoofing-Association
Syntax : attach name = <{|||}>

Parameters :
name = <{|||}>
The name of the Association.
dhcp spoofing config
Display/modify dhcp spoofing state
Syntax : config [state = <{enabled|disabled}>]

Parameters :
[state = <{enabled|disabled}>]
Enable/Disable spoofing.
dhcp spoofing debug
Following commands are available :

traceconfig : Display/modify DHCP spoofing trace configuratin

dhcp spoofing debug traceconfig
Display/modify DHCP spoofing trace configuratin
Syntax : traceconfig [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable tracing.
dhcp spoofing delete
Delete a Spoofing-Association
Syntax : delete name = <{|||}>

Parameters :
name = <{|||}>
The name of the Association.
dhcp spoofing detach
Disable a Spoofing-Association
Syntax : detach name = <{|||}>

Parameters :
name = <{|||}>
The name of the Association.
dhcp spoofing flush
Flush all the associations and the options.
Syntax : flush
dhcp spoofing list
List the available Spoofing-Associations
Syntax : list [name = <{|||}>]

Parameters :
[name = <{|||}>]
The name of the Association.
dhcp spoofing option-add
Add a DHCP Option Code to a Spoofing-Association.
Syntax : option-add name = <{|||}> option = <number>

Parameters :
name = <{|||}>
The name of the Association.
option = <number>
The option id.
dhcp spoofing option-delete
Delete a DHCP Option Code from a Spoofing-Association.
Syntax : option-delete name = <{|||}> option = <number>

Parameters :
name = <{|||}>
The name of the Association.
option = <number>
The option id.
[HIDDEN]diag
Following commands are available :

config : Configure diagnostics settings

ifhide : Specify interfaces to hide
iflist : List (dynamically generated at webpage load) of all
interfaces to be diagnosed (debug command)
ifconfig : Configure pingoption and/or ip-address for connection
flush : Flush all hidden interfaces and ifconfigurations
diag config
Configure diagnostics settings
Syntax : config [pingtimeout = <number>] [pingpacketsize = <number>]

Parameters :
[pingtimeout = <number>]
pingtimeout (in msec.)
[pingpacketsize = <number>]
ping packet size (in bytes incl.icmp header)
diag flush
Flush all hidden interfaces and ifconfigurations
Syntax : flush
diag ifconfig
Configure pingoption and/or ip-address for connection
Syntax : ifconfig ifname = <string> [ping = <{yes|no}>]
[ipaddress = <ip-address>]

Parameters :
ifname = <string>
interfacename
[ping = <{yes|no}>]
pingoption
[ipaddress = <ip-address>]
ping ipaddress
diag ifhide
Specify interfaces to hide
Syntax : ifhide ifname = <string>

Parameters :
ifname = <string>
interfacename
diag iflist
List (dynamically generated at webpage load) of all interfaces to be diagnosed
(debug command)
Syntax : iflist
dns
Following command groups are available :

client server
dns client
Following commands are available :

dnsadd : Add a DNS server.

dnsdelete : Delete a DNS server.
dnslist : List all DNS servers.
config : Modify the DNS resolver configuration.
nslookup : DNS lookup for a domain name or an address.
flush : Remove all DNS servers.
dns client config
Modify the DNS resolver configuration.
Syntax : config [timeout = <number{1-900}>] [retry = <number{0-10}>]
[state = <{disabled|enabled}>]
[search = <{disabled|enabled}>] [list = <string>]
[trace = <{disabled|enabled}>]

Parameters :
[timeout = <number{1-900}>]
The query timeout in seconds.
[retry = <number{0-10}>]
The number of query retries before giving up.
[state = <{disabled|enabled}>]
Enable/disable the DNS client.
[search = <{disabled|enabled}>]
Use the searchlist to construct fully qualified domain names.
[list = <string>]
Slash separated list of domain name suffixes.
[trace = <{disabled|enabled}>]
Enable or disable verbose logging.
dns client dnsadd
Add a DNS server.
Syntax : dnsadd addr = <string> [port = <number>]

Parameters :
addr = <string>
The DNS server IP address.
[port = <number>]
The DNS server port number.
dns client dnsdelete
Delete a DNS server.
Syntax : dnsdelete index = <number{1-99}>

Parameters :
index = <number{1-99}>
The index number (shown by the 'list' command) of the server to delete.
dns client dnslist
List all DNS servers.
Syntax : dnslist
dns client flush
Remove all DNS servers.
Syntax : flush
dns client nslookup
DNS lookup for a domain name or an address.
Syntax : nslookup host = <string>

Parameters :
host = <string>
The DNS domain name string to query.
dns server
Following commands are available :

config : DNS server configuration settings

flush : Flush all local DNS hosts and routes.

Following command groups are available :

debug host route

dns server config
DNS server configuration settings
Syntax : config [domain = <string>] [timeout = <number{0-120}>]
[suppress = <number{0-400}>] [state = <{disabled|enabled}>]
[trace = <{disabled|enabled}>]
[syslog = <{disabled|enabled}>]
[WANDownSpoofing = <{disabled|enabled}>]
[WDSpoofedIP = <ip-address>] [filter = <{disabled|enabled}>]

Parameters :
[domain = <string>]
The DNS server domain name.
[timeout = <number{0-120}>]
The forwarded DNS query timeout.
[suppress = <number{0-400}>]
Suppress not more than specified amount of remote DNS server errors.
[state = <{disabled|enabled}>]
Enable/disable the local DNS server/forwarder.
[trace = <{disabled|enabled}>]
Enable/disable verbose console logging.
[syslog = <{disabled|enabled}>]
Enable/disable SYSLOG for DNS events.
[WANDownSpoofing = <{disabled|enabled}>]
Enable/disable DNS spoofing when no applicable forwarding route present.
[WDSpoofedIP = <ip-address>]
IP address used for spoofing when WANDownSpoofing enabled.
[filter = <{disabled|enabled}>]
Enable/disable filtering of private address space and local IP addresses
from forwarded replies.
dns server debug
Following commands are available :

stats : Print the DNS server/forwarder statistics.

clear : Clear the DNS server/forwarder statistics.

Following command groups are available :

spoof
dns server debug clear
Clear the DNS server/forwarder statistics.
Syntax : clear
dns server debug spoof
Following commands are available :

clear : Clear the intercept cache table

list : List the intercept cache table.
getflags : Get the error flags for the given spoofed ip
getaddress : Get the real ip for the given spoofed ip
update : update the intercept cache table
dns server debug spoof clear
Clear the intercept cache table
Syntax : clear
dns server debug spoof getaddress
Get the real ip for the given spoofed ip
Syntax : getaddress addr = <ip-address>

Parameters :
addr = <ip-address>
The spoofed ip to look up.
dns server debug spoof getflags
Get the error flags for the given spoofed ip
Syntax : getflags addr = <ip-address>

Parameters :
addr = <ip-address>
The spoofed ip to look up.
dns server debug spoof list
List the intercept cache table.
Syntax : list
dns server debug spoof update
update the intercept cache table
Syntax : update
dns server debug stats
Print the DNS server/forwarder statistics.
Syntax : stats
dns server flush
Flush all local DNS hosts and routes.
Syntax : flush
dns server host
Following commands are available :

add : Add a local DNS host

delete : Delete a local DNS host
flush : Flush all local DNS hosts
list : List all local DNS hosts
dns server host add
Add a local DNS host
Syntax : add name = <string> [addr = <ip-address>] [ttl = <number>]

Parameters :
name = <string>
The name of an IP host to add.
[addr = <ip-address>]
The IP address of the host.
[ttl = <number>]
The lifetime of the host.
dns server host delete
Delete a local DNS host
Syntax : delete name = <string> [domain = <string>]

Parameters :
name = <string>
The name of an IP host to delete.
[domain = <string>]
The domian of an IP host to delete.
dns server host flush
Flush all local DNS hosts
Syntax : flush
dns server host list
List all local DNS hosts
Syntax : list
dns server route
Following commands are available :

add : Creates a DNS forwarding entry or template

delete : Deletes a DNS forwarding entry or template
flush : Removes all DNS forwarding entries and templates
list : Lists all DNS forwarding entries and templates
dns server route add
Creates a DNS forwarding entry or template
Syntax : add dns = <ip-address> [src = <ip-address>]
[srcmask = <ip-mask(dotted or cidr)>] [domain = <string>]
[metric = <number{0-100}>]
[label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|
Video|VoIP-RTP|VoIP-Signal|default|voice-only}>]
[intf = <{loop|Internet|LocalNetwork}>]

Parameters :
dns = <ip-address>
The IP address of a DNS server. If 0.0.0.0 is used, the entry becomes a
DNS-Template which is instantiated if DNS Server IPs are configured on an
IP interface.
[src = <ip-address>]
If specified, only DNS queries from machines of which the source IP
address matches the source prefix of the DNS entry will be forwarded to
the corresponding DNS server.
[srcmask = <ip-mask(dotted or cidr)>]
The IP address mask for the source prefix.
[domain = <string>]
Domain matching string. If configured, only those DNS queries of which
the domain name in the query matches with the string configured for the
entry will be forwarded to the corresponding DNS Server. Maximum string
length: 62 characters
[metric = <number{0-100}>]
The metric for the DNS entry. The DNS Entry List is sorted on DNS Metric;
the lower the metric, the higher the priority of the entry.
[label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-
RTP|VoIP-Signal|default|voice-only}>]
The label associated with the DNS entry or DNS Template.
[intf = <{loop|Internet|LocalNetwork}>]
The interface associated with the DNS entry or DNS Template.
dns server route delete
Deletes a DNS forwarding entry or template
Syntax : delete dns = <ip-address> [domain = <string>]
[intf = <{loop|Internet|LocalNetwork}>]

Parameters :
dns = <ip-address>
The IP address of a DNS server.
[domain = <string>]
The DNS domain string.
[intf = <{loop|Internet|LocalNetwork}>]
The interface associated with the DNS entry or DNS Template.
dns server route flush
Removes all DNS forwarding entries and templates
Syntax : flush
dns server route list
Lists all DNS forwarding entries and templates
Syntax : list
download
Following commands are available :

config : Change the upgrade daemon configuration

start : Start a new upgrade
ifadd : Add a download interface
ifattach : Attach a download interface
ifdetach : Detach a download interface
ifdelete : Delete a download interface
ifconfig : Configure a download interface
iflist : List download interfaces

Following command groups are available :

debug profile
download config
Change the upgrade daemon configuration
Syntax : config [state = <{disabled|enabled}>]
[protocol = <{tftp|ftp|http|https}>]

Parameters :
[state = <{disabled|enabled}>]
The upgrade daemon state
[protocol = <{tftp|ftp|http|https}>]
The transfer protocol to be used for file download
download debug
Following commands are available :

traceconfig : Enable/disable upgrade daemon tracing

sesslist : Display the list of sessions
download debug sesslist
Display the list of sessions
Syntax : sesslist
download debug traceconfig
Enable/disable upgrade daemon tracing
Syntax : traceconfig state = <{disabled|enabled}>

Parameters :
state = <{disabled|enabled}>
The upgrade daemon trace state
download ifadd
Add a download interface
Syntax : ifadd intf = <string>

Parameters :
intf = <string>
A download interface
download ifattach
Attach a download interface
Syntax : ifattach intf = <>

Parameters :
intf = <>
A download interface.
download ifconfig
Configure a download interface
Syntax : ifconfig intf = <> [protocol = <{tftp|ftp|http|https}>]
[dest = <{loop|Internet|LocalNetwork}>] [server = <string>]
[file = <string>] [time = <number>]

Parameters :
intf = <>
A download interface.
[protocol = <{tftp|ftp|http|https}>]
The transfer protocol
[dest = <{loop|Internet|LocalNetwork}>]
An network interface name.
[server = <string>]
The servername
[file = <string>]
The servername
[time = <number>]
download cycle time (in secs)
download ifdelete
Delete a download interface
Syntax : ifdelete intf = <>

Parameters :
intf = <>
A download interface.
download ifdetach
Detach a download interface
Syntax : ifdetach intf = <>

Parameters :
intf = <>
A download interface.
download iflist
List download interfaces
Syntax : iflist
download profile
Following commands are available :

add : Add a new file profile description

modify : Modify a file profile description
delete : Delete a file profile description
list : Display a list of the file profile descriptions
download profile add
Add a new file profile description
Syntax : add extension = <{sts|ini|bin}> [maxsize(KBytes) = <number>]
action = <{none|config_load|script_load|reboot|upgrade}>

Parameters :
extension = <{sts|ini|bin}>
The extension of the new file profile
[maxsize(KBytes) = <number>]
The maximum filesize (in KBytes) allowed for files with the extension of
this profile
action = <{none|config_load|script_load|reboot|upgrade}>
The action to be done when the file with the extension of this profile is
downloaded
[destdir = <{(HIDDEN)}>]
(HIDDEN)
download profile delete
Delete a file profile description
Syntax : delete extension = <{sts|ini|bin}>

Parameters :
extension = <{sts|ini|bin}>
The extension of the file profile to be deleted
download profile list
Display a list of the file profile descriptions
Syntax : list
download profile modify
Modify a file profile description
Syntax : modify extension = <{sts|ini|bin}> [maxsize(KBytes) = <number>]
action = <{none|config_load|script_load|reboot|upgrade}>

Parameters :
extension = <{sts|ini|bin}>
The extension of the new file profile
[maxsize(KBytes) = <number>]
The maximum filesize (in KBytes) allowed for files with the extension of
this profile
action = <{none|config_load|script_load|reboot|upgrade}>
The action to be done when the file with the extension of this profile is
downloaded
[destdir = <{(HIDDEN)}>]
(HIDDEN)
download start
Start a new upgrade
Syntax : start protocol = <{tftp|ftp|http|https}> [server = <string>]
[filename = <string>]

Parameters :
protocol = <{tftp|ftp|http|https}>
The protocol to be used for the download
[server = <string>]
The server name or IP address
[filename = <string>]
The file to be downloaded
dsd
Following commands are available :

config : Display/modify DSD framework configuration

Following command groups are available :

debug intercept syslog urlfilter webfilter

dsd config
Display/modify DSD framework configuration
Syntax : config [state = <{disabled|enabled|automatic}>]

Parameters :
[state = <{disabled|enabled|automatic}>]
DSD framework operation mode
dsd debug
Following commands are available :

config : Display/modify DSD debug settings

stats : Display/clear DSD framework and module statistics
recycling : Display/modify HTTPI recycling settings
proxy : Display/modify HTTPI fixed proxy settings

Following command groups are available :

connection
dsd debug config
Display/modify DSD debug settings
Syntax : config [turbomode = <{disabled|enabled}>]

Parameters :
[turbomode = <{disabled|enabled}>]
Enable/disable turbomode
dsd debug connection
Following commands are available :

list : Display internal connection pool usage

dsd debug connection list
Display internal connection pool usage
Syntax : list [expand = <{disabled|enabled}>]

Parameters :
[expand = <{disabled|enabled}>]
Expanded listing.
dsd debug proxy
Display/modify HTTPI fixed proxy settings
Syntax : proxy [state = <{disabled|enabled}>] [dest = <ip-address>]
[port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|
domain|doom|echo|exec|finger|ftp|ftp-data|gopher|h323|
httpproxy|ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|
irc-o|irc-u|kerberos|ldap|login|netbios-dgm|netbios-ns|
netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|
nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|
sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|
telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-rlogin|
who|www-http|whoami|xwindows} or number>]

Parameters :
[state = <{disabled|enabled}>]
Enable/disable fixed proxy redirecting
[dest = <ip-address>]
Destination IP where requests will be forwarded to
[port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec|
finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-
dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|
nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|
sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>]
Port used for connecting to the proxy IP
dsd debug recycling
Display/modify HTTPI recycling settings
Syntax : recycling [state = <{disabled|enabled}>] [interval = <number>]
[httpidle = <number>] [otheridle = <number>]

Parameters :
[state = <{disabled|enabled}>]
Enable/disable stream recycling
[interval = <number>]
Time between successive activity checks
[httpidle = <number>]
Minimal idle count for recycling (filtered) http streams
[otheridle = <number>]
Minimal idle count for recycling other streams
dsd debug stats
Display/clear DSD framework and module statistics
Syntax : stats [name = <{intercept|urlfilter|recycling|syslog|all}>]
[clear = <{no|yes}>]

Parameters :
[name = <{intercept|urlfilter|recycling|syslog|all}>]
Specify the name of a module
[clear = <{no|yes}>]
Clear the specified statistics
dsd intercept
Following commands are available :

config : Display/modify HTTP Intercept configuration

dsd intercept config
Display/modify HTTP Intercept configuration
Syntax : config [WDSpoofedIP = <ip-address>] [servertimeout = <number>]
[connecterrorurl = <string>] [categoryerrorurl = <string>]
[monitorintercepturl = <string>]
[unauthorizedrequrl = <string>]
[imageredirect = <{disabled|enabled}>]
[imageredirecturl = <string>]
[alwaysuseip = <{disabled|enabled}>]

Parameters :
[WDSpoofedIP = <ip-address>]
IP address indicating unavailable WAN connection.
[servertimeout = <number>]
Server timeout for redirect action
[connecterrorurl = <string>]
Destination url when connection to server failed
[categoryerrorurl = <string>]
Destination url when connection to category server failed
[monitorintercepturl = <string>]
Destination url when request is intercepted by monitor thread
[unauthorizedrequrl = <string>]
Destination url when requested url is blocked by some rule or setting
[imageredirect = <{disabled|enabled}>]
Enable/disable substituting blocked images
[imageredirecturl = <string>]
URL of image used when substituting blocked images
[alwaysuseip = <{disabled|enabled}>]
Always use ip address when redirecting to a local page
dsd syslog
Following commands are available :

config : Display/modify HTTPI logging configuration

list : Display HTTPI log file
dsd syslog config
Display/modify HTTPI logging configuration
Syntax : config [syslog = <{none|unauthorized|errors|intercepted|all}>]

Parameters :
[syslog = <{none|unauthorized|errors|intercepted|all}>]
Define which type of events to log
dsd syslog list
Display HTTPI log file
Syntax : list
dsd urlfilter
Following commands are available :

config : Display/modify url filtering configuration

Following command groups are available :

rule
dsd urlfilter config
Display/modify url filtering configuration
Syntax : config [state = <{disabled|enabled}>]
[blockproxy = <{disabled|enabled}>]
[blockipaddress = <{disabled|enabled}>]
[blockobscuredip = <{disabled|enabled}>]
[defaultaction = <{block|accept}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/disable url filtering
[blockproxy = <{disabled|enabled}>]
Block HTTP requests via a proxy server
[blockipaddress = <{disabled|enabled}>]
Block HTTP requests if host name is IP address
[blockobscuredip = <{disabled|enabled}>]
Block HTTP requests if host name is believed to be an IP address
[defaultaction = <{block|accept}>]
Action to perform when no filter applicable.
dsd urlfilter rule
Following commands are available :

add : Add a rule

delete : Remove a rule
modify : Modify an existing rule
list : Display a list of current rules
flush : Remove all current rules
dsd urlfilter rule add
Add a rule
Syntax : add url = <string> action = <{block|accept|redirect}>
redirect = <string>

Parameters :
url = <string>
Definition of the url filter
action = <{block|accept|redirect}>
Action to perform when url matches url
redirect = <string>
Redirection url
dsd urlfilter rule delete
Remove a rule
Syntax : delete index = <number> [url = <string>]

Parameters :
index = <number>
Insertion position in the list
[url = <string>]
Definition of the url filter
dsd urlfilter rule flush
Remove all current rules
Syntax : flush
dsd urlfilter rule list
Display a list of current rules
Syntax : list
dsd urlfilter rule modify
Modify an existing rule
Syntax : modify index = <number> [newurl = <string>]
action = <{block|accept|redirect}> redirect = <string>

Parameters :
index = <number>
Insertion position in the list
[newurl = <string>]
Definition of the new url filter
action = <{block|accept|redirect}>
Action to perform when url matches url
redirect = <string>
Redirection url
dsd webfilter
Following commands are available :

config : Configure web filter

list : Display web filter license state

Following command groups are available :

cache professional server standard

dsd webfilter cache
Following commands are available :

stats : Display cache statistics

flush : Empty internal cache
dsd webfilter cache flush
Empty internal cache
Syntax : flush
dsd webfilter cache stats
Display cache statistics
Syntax : stats [expand = <{disabled|enabled}>]

Parameters :
[expand = <{disabled|enabled}>]
More detailed statistics.
dsd webfilter config
Configure web filter
Syntax : config [state = <{enabled|disabled}>]
[serverunreachable = <{block-all|accept-all}>]
[uncategorized = <{block|accept}>]
[license = <{none|trial|standard|professional}>]
[ticket = <string>] [sessionkey = <string>]

Parameters :
[state = <{enabled|disabled}>]
Enable or disable the web filter
[serverunreachable = <{block-all|accept-all}>]
Block or allow requests when the categorization server is unreachable
[uncategorized = <{block|accept}>]
Block or allow requests for which no category is available
[license = <{none|trial|standard|professional}>]

[ticket = <string>]

[sessionkey = <string>]
dsd webfilter list
Display web filter license state
Syntax : list
dsd webfilter professional
Following commands are available :

config :

Following command groups are available :

category level rule

dsd webfilter professional category
Following commands are available :

Parameters :
destid = <number>
Destination category or group
srcid = <number>
Category ID to add
dsd webfilter professional category create
Create a category or group
Syntax : create id = <number> name = <quoted string>
type = <{category|group}>

Parameters :
id = <number>
Unique local ID for the category/group
name = <quoted string>
Friendly name
type = <{category|group}>
dsd webfilter professional category delete
Delete a category or group
Syntax : delete id = <number>

Parameters :
id = <number>
Unique local ID for the category/group
dsd webfilter professional category flush
Delete all categories and groups
Syntax : flush
dsd webfilter professional category list
List all categories and groups
Syntax : list [type = <{category|group}>]

Parameters :
[type = <{category|group}>]
dsd webfilter professional category remove
Remove a category from a group
Syntax : remove destid = <number> srcid = <number>

Parameters :
destid = <number>
Destination category or group
srcid = <number>
Category ID to add
dsd webfilter professional config

Syntax : config [listversion = <string>] [validcatmask = <string>]

Parameters :
[listversion = <string>]

[validcatmask = <string>]
dsd webfilter professional level
Following commands are available :

set : Set current web filtering level

add : Add a new web filtering level
modify : Modify a web filtering level
delete : Delete a web filtering level
list : Display levels
flush : Delete all levels
dsd webfilter professional level add
Add a new web filtering level
Syntax : add index = <number> name = <string> [text = <quoted string>]
[otherurls = <{block|accept}>]

Parameters :
index = <number>
Level index (-1 for next available)
name = <string>
Content category level name
[text = <quoted string>]
Friendly description
[otherurls = <{block|accept}>]
Block or allow requests that do not belong to a specific category
dsd webfilter professional level delete
Delete a web filtering level
Syntax : delete index = <number> name = <string> [text = <quoted string>]
[otherurls = <{block|accept}>]

Parameters :
index = <number>
Level index (-1 for next available)
name = <string>
Content category level name
[text = <quoted string>]
Friendly description
[otherurls = <{block|accept}>]
Block or allow requests that do not belong to a specific category
dsd webfilter professional level flush
Delete all levels
Syntax : flush
dsd webfilter professional level list
Display levels
Syntax : list
dsd webfilter professional level modify
Modify a web filtering level
Syntax : modify index = <number> name = <string> [text = <quoted string>]
[otherurls = <{block|accept}>]

Parameters :
name = <string>
Name of the current category level
dsd webfilter professional rule
Following commands are available :

modify : Modify a rule

list : List all rules
clear : Reset level to default rule
dsd webfilter professional rule clear
Reset level to default rule
Syntax : clear level = <string>

Parameters :
level = <string>
Level name
dsd webfilter professional rule list
List all rules
Syntax : list [level = <string>]

Parameters :
[level = <string>]
Level name
dsd webfilter professional rule modify
Modify a rule
Syntax : modify level = <string> [id = <number>] action = <{block|accept}>

Parameters :
level = <string>
Level name
[id = <number>]
Server category ID
action = <{block|accept}>
dsd webfilter server
Following commands are available :

config : Configure web filter server

add : Add a web filter server
modify : Modify a web filter server
delete : Delete a web filter server
list : List all web filter servers
flush : Flush server list
dsd webfilter server add
Add a web filter server
Syntax : add [index = <number>] address = <ip-address>
port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain|
doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|
ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|
kerberos|ldap|login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|
pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet|
rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|
sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|
ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami|
xwindows} or number>

Parameters :
[index = <number>]
Server index
address = <ip-address>
Server IP address
port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec|
finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|ingres-
net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-dgm|
netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet|
rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|
syslog|systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>
Server port
dsd webfilter server config
Configure web filter server
Syntax : config [listversion = <string>] [retries = <number>]
[servertimeout = <number>] [timeoutmultiplier = <number>]
[renewfrequency = <number>] [useproxy = <{disabled|enabled}>]
[proxyserver = <ip-address>]
[proxyport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|
bgp|biff|bootpc|bootps|chargen|clearcase|daytime|
discard|dns|domain|doom|echo|exec|finger|ftp|ftp-
data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|
ldap|login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|
snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|
systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|
xwindows} or number>]

Parameters :
[listversion = <string>]

[retries = <number>]
Number of server contact retries
[servertimeout = <number>]
Cobion server timeout in seconds
[timeoutmultiplier = <number>]
Timeout for reporting server error to client (timeout * multiplier)
[renewfrequency = <number>]
Frequency (in hours) to check license and list versions
[useproxy = <{disabled|enabled}>]
Enable or disable the use of a proxy server
[proxyserver = <ip-address>]
Proxy server to be used
[proxyport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|
exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|
imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|
netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|
nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|
sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|telnet|time|
timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|
whoami|xwindows} or number>]
Proxy server port to be used
dsd webfilter server delete
Delete a web filter server
Syntax : delete index = <number> address = <ip-address>
port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|
domain|doom|echo|exec|finger|ftp|ftp-data|gopher|h323|
httpproxy|ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|
irc-o|irc-u|kerberos|ldap|login|netbios-dgm|netbios-ns|
netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|
nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|
sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|
telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-rlogin|
who|www-http|whoami|xwindows} or number>

Parameters :
index = <number>
Server index
address = <ip-address>
Server IP address
port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec|
finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|ingres-
net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-dgm|
netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet|
rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|
syslog|systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>
Server port
dsd webfilter server flush
Flush server list
Syntax : flush
dsd webfilter server list
List all web filter servers
Syntax : list
dsd webfilter server modify
Modify a web filter server
Syntax : modify index = <number> address = <ip-address>
port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|
domain|doom|echo|exec|finger|ftp|ftp-data|gopher|h323|
httpproxy|ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|
irc-o|irc-u|kerberos|ldap|login|netbios-dgm|netbios-ns|
netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|
nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|
sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|
telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-rlogin|
who|www-http|whoami|xwindows} or number>

config :

Following command groups are available :

category level rule

dsd webfilter standard category
Following commands are available :

Parameters :
destid = <number>
Destination category or group
srcid = <number>
Category ID to add
dsd webfilter standard category create
Create a category or group
Syntax : create id = <number> name = <quoted string>
type = <{category|group}>

Parameters :
id = <number>
Unique local ID for the category/group
name = <quoted string>
Friendly name
type = <{category|group}>
dsd webfilter standard category delete
Delete a category or group
Syntax : delete id = <number>

Parameters :
id = <number>
Unique local ID for the category/group
dsd webfilter standard category flush
Delete all categories and groups
Syntax : flush
dsd webfilter standard category list
List all categories and groups
Syntax : list [type = <{category|group}>]

Parameters :
[type = <{category|group}>]
dsd webfilter standard category remove
Remove a category from a group
Syntax : remove destid = <number> srcid = <number>

Parameters :
destid = <number>
Destination category or group
srcid = <number>
Category ID to add
dsd webfilter standard config

Syntax : config [stdmax = <number>] [validcatmask = <string>]

Parameters :
[stdmax = <number>]

[validcatmask = <string>]
dsd webfilter standard level
Following commands are available :

set : Set current web filtering level

add : Add a new web filtering level
modify : Modify a web filtering level
delete : Delete a web filtering level
list : Display levels
flush : Delete all levels
dsd webfilter standard level add
Add a new web filtering level
Syntax : add index = <number> name = <string> [text = <quoted string>]
[otherurls = <{block|accept}>]

Parameters :
index = <number>
Level index (-1 for next available)
name = <string>
Content category level name
[text = <quoted string>]
Friendly description
[otherurls = <{block|accept}>]
Block or allow requests that do not belong to a specific category
dsd webfilter standard level delete
Delete a web filtering level
Syntax : delete index = <number> name = <string> [text = <quoted string>]
[otherurls = <{block|accept}>]

Parameters :
index = <number>
Level index (-1 for next available)
name = <string>
Content category level name
[text = <quoted string>]
Friendly description
[otherurls = <{block|accept}>]
Block or allow requests that do not belong to a specific category
dsd webfilter standard level flush
Delete all levels
Syntax : flush
dsd webfilter standard level list
Display levels
Syntax : list
dsd webfilter standard level modify
Modify a web filtering level
Syntax : modify index = <number> name = <string> [text = <quoted string>]
[otherurls = <{block|accept}>]

Parameters :
name = <string>
Name of the current category level
dsd webfilter standard rule
Following commands are available :

modify : Modify a rule

list : List all rules
clear : Reset level to default rule
dsd webfilter standard rule clear
Reset level to default rule
Syntax : clear level = <string>

Parameters :
level = <string>
Level name
dsd webfilter standard rule list
List all rules
Syntax : list [level = <string>]

Parameters :
[level = <string>]
Level name
dsd webfilter standard rule modify
Modify a rule
Syntax : modify level = <string> [id = <number>] action = <{block|accept}>

Parameters :
level = <string>
Level name
[id = <number>]
Server category ID
action = <{block|accept}>
dyndns
Following commands are available :

add : Add a dynamic DNS client.

modify : Modify a dynamic DNS client.
delete : Delete a dynamic DNS client.
flush : Delete all dynamic DNS clients.
list : List all dynamic DNS clients.

Following command groups are available :

host service
dyndns add
Add a dynamic DNS client.
Syntax : add name = <string>

Parameters :
name = <string>
The dynamic DNS client name.
dyndns delete
Delete a dynamic DNS client.
Syntax : delete name = <>

Parameters :
name = <>
The dynamic DNS client name.
dyndns flush
Delete all dynamic DNS clients.
Syntax : flush
dyndns host
Following commands are available :

add : Add a fully qualified host name

delete : Delete a host name
flush : Delete all host names
list : List all host names
dyndns host add
Add a fully qualified host name
Syntax : add group = <> name = <string>

Parameters :
group = <>
The dynamic DNS host group.
name = <string>
The name of an IP host to add.
dyndns host delete
Delete a host name
Syntax : delete name = <>

Parameters :
name = <>
The name of an IP host to delete.
dyndns host flush
Delete all host names
Syntax : flush
dyndns host list
List all host names
Syntax : list
dyndns list
List all dynamic DNS clients.
Syntax : list
dyndns modify
Modify a dynamic DNS client.
Syntax : modify name = <> [intf = <{Internet}>] [user = <string>]
[password = <password>] [group = <>] [mx = <string>]
[backmx = <{disabled|enabled}>]
[wildcard = <{disabled|enabled}>]
[offline = <{disabled|enabled}>]
[service = <{dyndns|statdns|custom|No-IP|DtDNS|gnudip}>]
[status = <{disabled|enabled}>]
[trace = <{disabled|enabled}>]

Parameters :
name = <>
The dynamic DNS client name.
[intf = <{Internet}>]
The dynamic DNS client interface.
[user = <string>]
The username for dynamic DNS authentication.
[password = <password>]
The password for dynamic DNS authentication.
[group = <>]
The dynamic DNS host group.
[mx = <string>]
The mail exchanger.
[backmx = <{disabled|enabled}>]
Set up the mail exchanger as a backup MX.
[wildcard = <{disabled|enabled}>]
Allow use of hostname wildcards.
[offline = <{disabled|enabled}>]
Set the host to offline mode.
[service = <{dyndns|statdns|custom|No-IP|DtDNS|gnudip}>]
The dynamic DNS service.
[status = <{disabled|enabled}>]
Enable/Disable the dynamic DNS client.
[trace = <{disabled|enabled}>]
Enable/Disable the verbose console logging for the dynamic DNS client.
dyndns service
Following commands are available :

modify : Modify specific dynamic DNS service settings

list : List all dynamic DNS services
dyndns service list
List all dynamic DNS services
Syntax : list
dyndns service modify
Modify specific dynamic DNS service settings
Syntax : modify name = <{dyndns|statdns|custom|No-IP|DtDNS|gnudip}>
[server = <string>]
[port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|
biff|bootpc|bootps|chargen|clearcase|daytime|discard|
dns|domain|doom|echo|exec|finger|ftp|ftp-data|gopher|
h323|httpproxy|ike|ils|imap2|imap3|ingres-net|
ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-
dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|
nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|
syslog|systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows}
or number>]
[request = <string>] [updateinterval = <number{0-2097120}>]
[retryinterval = <number{0-600}>] [max_retry = <number{1-5}>]

Parameters :
name = <{dyndns|statdns|custom|No-IP|DtDNS|gnudip}>
The dynamic DNS service.
[server = <string>]
The dynamic DNS server hostname.
[port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec|
finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-
dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|
nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|
sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>]
The dynamic DNS server port.
[request = <string>]
The dynamic DNS request string.
[updateinterval = <number{0-2097120}>]
Number of seconds before a dynamic update is sent to the dynamic DNS
server (The value 0 means disabled).
[retryinterval = <number{0-600}>]
Number of seconds between retries if communication with the dynamic DNS
server fails (The value 0 means disabled).
[max_retry = <number{1-5}>]
The maximum number of retries if communication with the dynamic DNS
server fails.
env
Following commands are available :

set : Sets an environment variable.

get : Gets an environment variable.
unset : Deletes an environment variable.
list : List all environment variables.
flush : Remove all non-system environment variables.
[HIDDEN]env def
Define an environment variable
Syntax : def var = <string>
type = <{string|passw|integer|combo|list|radioset|bool|ipaddr|
ipmask|passwcheck|label|hex|grp}>
[grp = <string>] [desc = <translated string>]
[help = <translated string>] [alias = <translated string>]
[req <{no|yes}>] [default = <quoted string>]
[data = <quoted string>] [dalias = <translated string>]
[min = <number>] [max = <number>] [calc = <quoted string>]
[linkvar = <string>]

Parameters :
var = <string>
Variable name : name of variable or group
type = <{string|passw|integer|combo|list|radioset|bool|ipaddr|ipmask|
passwcheck|label|hex|grp}>
type of the variable
[grp = <string>]
Group name in case variable is defined
[desc = <translated string>]
Description text, help text
[help = <translated string>]
Addtional help text (only for group description
[alias = <translated string>]
user friendly name for field or group
[req <{no|yes}>]
parameter without value: to indicate a required field
[default = <quoted string>]
a default value field for variable
[data = <quoted string>]
list of values, used in configuration file
[dalias = <translated string>]
user friendly names for data values
[min = <number>]
minumum value in case type is integer
[max = <number>]
maximum value in case type is integer
[calc = <quoted string>]
host wizard related stuff, ignored here
[linkvar = <string>]
to which variable this variable is linked to (only for passwcheck)
env flush
Remove all non-system environment variables.
Syntax : flush
env get
Gets an environment variable.
Syntax : get var = <{_SW_FLAG|_ETHERNET|_COMPANY_NAME|_COMPANY_URL|_PROD_NAME|
_BRAND_NAME|_PROD_URL|_PROD_DESCRIPTION|_PROD_NUMBER|
_SSID_SERIAL_PREFIX|_BOARD_SERIAL_NBR|_PROD_SERIAL_NBR|_FII|
_BUILD|_BOOTLOADER_VERSION|_BUILDVARIANT|_OUI|
_BUILD_PASSIVEBANK|_CUSTOVARIANT|_PHYSLAYERTYPE|_BUILDNAME|
_BUILD_FILENAME|_BUILD_PASSIVEFILENAME|_PRL|_FIA|
_BOARD_NAME|_COMPANY_ID|_COPYRIGHT|_TPVERSION|_PROD_ID|
_PROD_FRIENDLY_NAME|_VARIANT_ID|_VARIANT_FRIENDLY_NAME|
_MACADDR|_LMACADDR|_WL_VERSION_0|_WL_VERSION|
_WL0_WEPKEY_SERIAL|_WL0_WPAKEY_SERIAL|_WL0_SSID_SERIAL|
_WL0_SSID_PREFIX|_WL0_BASE52_SERIAL|_WL0_MAC_POSTFIX|
_WL0_PIN_SERIAL|_WL0_UUID_E_SERIAL|_WL0_UUID_R_SERIAL|
_WL1_WEPKEY_SERIAL|_WL1_WPAKEY_SERIAL|_WL1_SSID_SERIAL|
_WL1_BASE52_SERIAL|_WL1_PIN_SERIAL|_WL1_UUID_E_SERIAL|
_WL1_UUID_R_SERIAL|_WL2_WEPKEY_SERIAL|_WL2_WPAKEY_SERIAL|
_WL2_SSID_SERIAL|_WL2_BASE52_SERIAL|_WL2_PIN_SERIAL|
_WL2_UUID_E_SERIAL|_WL2_UUID_R_SERIAL|_WL3_WEPKEY_SERIAL|
_WL3_WPAKEY_SERIAL|_WL3_SSID_SERIAL|_WL3_BASE52_SERIAL|
_WL3_PIN_SERIAL|_WL3_UUID_E_SERIAL|_WL3_UUID_R_SERIAL|
_SSID_WL_MACADDR_POSTFIX|_SSID_POSTFIX_LEGACY_OR_MAC|
_WL_MACADDR|_LWL_MACADDR|_VOICE_CAPABLE|_VOIP_TYPE|
_MODEMLABEL|_ADSL_EOC_VERSION|_EOC_MSG|_WIZ_AUTOPOPUP|
_SNTPPOLL_POST_SYNC|_SNTPPOLL_PRE_SYNC|CONF_DEVICE|
CONF_REGION|CONF_PROVIDER|CONF_DESCRIPTION|CONF_SERVICE|
CONF_DATE|CONF_DATETIME|HOST_SETUP|HOST_LANGUAGE|
UPGRADE_URL|IS_NOT_DSL_DEVICE|ST_PPP_USER|TPL_VERSION|GEO}>

Parameters :
var = <{_SW_FLAG|_ETHERNET|_COMPANY_NAME|_COMPANY_URL|_PROD_NAME|
_BRAND_NAME|_PROD_URL|_PROD_DESCRIPTION|_PROD_NUMBER|
_SSID_SERIAL_PREFIX|_BOARD_SERIAL_NBR|_PROD_SERIAL_NBR|_FII|_BUILD|
_BOOTLOADER_VERSION|_BUILDVARIANT|_OUI|_BUILD_PASSIVEBANK|
_CUSTOVARIANT|_PHYSLAYERTYPE|_BUILDNAME|_BUILD_FILENAME|
_BUILD_PASSIVEFILENAME|_PRL|_FIA|_BOARD_NAME|_COMPANY_ID|_COPYRIGHT|
_TPVERSION|_PROD_ID|_PROD_FRIENDLY_NAME|_VARIANT_ID|
_VARIANT_FRIENDLY_NAME|_MACADDR|_LMACADDR|_WL_VERSION_0|_WL_VERSION|
_WL0_WEPKEY_SERIAL|_WL0_WPAKEY_SERIAL|_WL0_SSID_SERIAL|
_WL0_SSID_PREFIX|_WL0_BASE52_SERIAL|_WL0_MAC_POSTFIX|_WL0_PIN_SERIAL|
_WL0_UUID_E_SERIAL|_WL0_UUID_R_SERIAL|_WL1_WEPKEY_SERIAL|
_WL1_WPAKEY_SERIAL|_WL1_SSID_SERIAL|_WL1_BASE52_SERIAL|
_WL1_PIN_SERIAL|_WL1_UUID_E_SERIAL|_WL1_UUID_R_SERIAL|
_WL2_WEPKEY_SERIAL|_WL2_WPAKEY_SERIAL|_WL2_SSID_SERIAL|
_WL2_BASE52_SERIAL|_WL2_PIN_SERIAL|_WL2_UUID_E_SERIAL|
_WL2_UUID_R_SERIAL|_WL3_WEPKEY_SERIAL|_WL3_WPAKEY_SERIAL|
_WL3_SSID_SERIAL|_WL3_BASE52_SERIAL|_WL3_PIN_SERIAL|
_WL3_UUID_E_SERIAL|_WL3_UUID_R_SERIAL|_SSID_WL_MACADDR_POSTFIX|
_SSID_POSTFIX_LEGACY_OR_MAC|_WL_MACADDR|_LWL_MACADDR|_VOICE_CAPABLE|
_VOIP_TYPE|_MODEMLABEL|_ADSL_EOC_VERSION|_EOC_MSG|_WIZ_AUTOPOPUP|
_SNTPPOLL_POST_SYNC|_SNTPPOLL_PRE_SYNC|CONF_DEVICE|CONF_REGION|
CONF_PROVIDER|CONF_DESCRIPTION|CONF_SERVICE|CONF_DATE|CONF_DATETIME|
HOST_SETUP|HOST_LANGUAGE|UPGRADE_URL|IS_NOT_DSL_DEVICE|ST_PPP_USER|
TPL_VERSION|GEO}>
The name of the variable.
[HIDDEN]env hash
Transfer variable by hash algrithm.
Syntax : hash src = <string> dest = <string>
crypto = <{MD2|MD5|SHA1|SHA256|SHA512}> len = <number{0-128}>

Parameters :
src = <string>
The values of the source
dest = <string>
The name of the destinate variable.
crypto = <{MD2|MD5|SHA1|SHA256|SHA512}>
The selection of encryption.
len = <number{0-128}>
The length to get.
env list
List all environment variables.
Syntax : list
env set
Sets an environment variable.
Syntax : set var = <string> value = <translated string>

Parameters :
var = <string>
The name of the variable.
value = <translated string>
A translated quoted string defining the variable value.
env unset
Deletes an environment variable.
Syntax : unset var = <{_SW_FLAG|_ETHERNET|_COMPANY_NAME|_COMPANY_URL|
_PROD_NAME|_BRAND_NAME|_PROD_URL|_PROD_DESCRIPTION|
_PROD_NUMBER|_SSID_SERIAL_PREFIX|_BOARD_SERIAL_NBR|
_PROD_SERIAL_NBR|_FII|_BUILD|_BOOTLOADER_VERSION|
_BUILDVARIANT|_OUI|_BUILD_PASSIVEBANK|_CUSTOVARIANT|
_PHYSLAYERTYPE|_BUILDNAME|_BUILD_FILENAME|
_BUILD_PASSIVEFILENAME|_PRL|_FIA|_BOARD_NAME|_COMPANY_ID|
_COPYRIGHT|_TPVERSION|_PROD_ID|_PROD_FRIENDLY_NAME|
_VARIANT_ID|_VARIANT_FRIENDLY_NAME|_MACADDR|_LMACADDR|
_WL_VERSION_0|_WL_VERSION|_WL0_WEPKEY_SERIAL|
_WL0_WPAKEY_SERIAL|_WL0_SSID_SERIAL|_WL0_SSID_PREFIX|
_WL0_BASE52_SERIAL|_WL0_MAC_POSTFIX|_WL0_PIN_SERIAL|
_WL0_UUID_E_SERIAL|_WL0_UUID_R_SERIAL|_WL1_WEPKEY_SERIAL|
_WL1_WPAKEY_SERIAL|_WL1_SSID_SERIAL|_WL1_BASE52_SERIAL|
_WL1_PIN_SERIAL|_WL1_UUID_E_SERIAL|_WL1_UUID_R_SERIAL|
_WL2_WEPKEY_SERIAL|_WL2_WPAKEY_SERIAL|_WL2_SSID_SERIAL|
_WL2_BASE52_SERIAL|_WL2_PIN_SERIAL|_WL2_UUID_E_SERIAL|
_WL2_UUID_R_SERIAL|_WL3_WEPKEY_SERIAL|_WL3_WPAKEY_SERIAL|
_WL3_SSID_SERIAL|_WL3_BASE52_SERIAL|_WL3_PIN_SERIAL|
_WL3_UUID_E_SERIAL|_WL3_UUID_R_SERIAL|
_SSID_WL_MACADDR_POSTFIX|_SSID_POSTFIX_LEGACY_OR_MAC|
_WL_MACADDR|_LWL_MACADDR|_VOICE_CAPABLE|_VOIP_TYPE|
_MODEMLABEL|_ADSL_EOC_VERSION|_EOC_MSG|_WIZ_AUTOPOPUP|
_SNTPPOLL_POST_SYNC|_SNTPPOLL_PRE_SYNC|CONF_DEVICE|
CONF_REGION|CONF_PROVIDER|CONF_DESCRIPTION|CONF_SERVICE|
CONF_DATE|CONF_DATETIME|HOST_SETUP|HOST_LANGUAGE|
UPGRADE_URL|IS_NOT_DSL_DEVICE|ST_PPP_USER|TPL_VERSION|
GEO}>

ifadd : Create a new ETH interface.

ifdelete : Delete an ETH interface.
ifattach : Attach an ETH interface.
ifdetach : Detach an ETH interface.
ifconfig : Modify an ETH interface.
iflist : Display the ETH interfaces.
flush : Flush all ETH interfaces.

Following command groups are available :

device filter bridge efm oam

switch vlan
eth bridge
Following commands are available :

config : Modify/Display the bridge configuration settings.

ippriomap : Modify the IP priority mappings for a bridge.
ippriomapreset : Reset the IP priority mappings to its defaults.
list : Display the current bridge instances.
add : Add a new bridge instance.
delete : Delete a bridge instance.
select : Select the default bridge for configuring interfaces from
(if not setting bridge name, for legacy purposes).
ifadd : Add a new bridge interface.
ifdelete : Delete a bridge interface.
ifattach : Attach a bridge interface.
ifdetach : Detach a bridge interface.
ifconfig : Modify a bridge interface configuration.
ifflush : flush the bridge interfaces: detach/delete all interfaces.
iflist : Display the current bridge interfaces.
macadd : Add a static MAC address to a bridge interface.
maclist : Display the MAC address database.
macdelete : Remove a MAC address from the database.
clear : Clear bridge statistics.
flush : Flush all bridge instances with their interfaces and
properties.

Following command groups are available :

dynvlan filter igmpsnooping rule unknownvlan

vlan xtratag
eth bridge add
Add a new bridge instance.
Syntax : add brname = <string>

Parameters :
brname = <string>
The name of the new bridge instance.
eth bridge clear
Clear bridge statistics.
Syntax : clear [brname = <{bridge}>]

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
eth bridge config
Modify/Display the bridge configuration settings.
Syntax : config [brname = <{bridge}>] [age = <number{10-1000000}>]
[filter = <{none|no_WAN_broadcast}>]
[vlan = <{disabled|enabled}>]

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
[age = <number{10-1000000}>]
The lifetime (in seconds) of a dynamically learned MAC address.
[filter = <{none|no_WAN_broadcast}>]
The bridge filter to be applied for all WAN bridge interfaces.
[vlan = <{disabled|enabled}>]
Enable/disable the use of the VLAN id of the received VLAN packets.
[precedencemap = <{(HIDDEN)}>]
(HIDDEN)
eth bridge delete
Delete a bridge instance.
Syntax : delete brname = <{bridge}>

Parameters :
brname = <{bridge}>
The name of a bridge instance.
[HIDDEN]eth bridge dyngroup
Following commands are available :

add : Add a dynamic group membership entry.

config : Modify the dynamic group membership configuration.
eth bridge dyngroup add
Add a dynamic group membership entry.
Syntax : add [id = <number{0-100000}>] hwaddr = <masked-hardware-address>
group = <{default|WAN|VOIP}> [rgroup = <{default|WAN|VOIP}>]

Parameters :
[id = <number{0-100000}>]

hwaddr = <masked-hardware-address>

group = <{default|WAN|VOIP}>
The group for the dynamic group membership entry.
[rgroup = <{default|WAN|VOIP}>]
The group that is to be removed from the port.
[dynamic = <{(HIDDEN)}>]
(HIDDEN)
eth bridge dyngroup config
Modify the dynamic group membership configuration.
Syntax : config [timeout = <number{0-100000}>]

Parameters :
[timeout = <number{0-100000}>]
Timeout in seconds for the dynamic entries.
eth bridge dynvlan
Following commands are available :

add : Add a dynamic VLAN membership entry.

delete : Delete a dynamic VLAN membership entry.
list : Display a dynamic VLAN membership entry.
flush : Flush all dynamic VLAN membership entries.
config : Modify the dynamic VLAN membership configuration.
actlist : Display the active MAC entries for the dynamic VLAN
membership.
eth bridge dynvlan actlist
Display the active MAC entries for the dynamic VLAN membership.
Syntax : actlist
eth bridge dynvlan add
Add a dynamic VLAN membership entry.
Syntax : add [id = <number{0-100000}>] hwaddr = <masked-hardware-address>
vlan = <{default|WAN|VOIP}> [prio = <number{0-7}>]
[mode = <{none|vid|prio|both}>]

Parameters :
[id = <number{0-100000}>]
The id of the dynamic VLAN membership entry.
hwaddr = <masked-hardware-address>
The (masked) ethernet MAC address of the dynamic VLAN membership entry.
vlan = <{default|WAN|VOIP}>
The VLAN for the dynamic VLAN membership entry.
[prio = <number{0-7}>]
The new port priority to be set.
[mode = <{none|vid|prio|both}>]
The flexiport mode of operation.
[remvlan = <{(HIDDEN)}>]
(HIDDEN)
[dynamic = <{(HIDDEN)}>]
(HIDDEN)
eth bridge dynvlan config
Modify the dynamic VLAN membership configuration.
Syntax : config [timeout = <number{0-100000}>]

Parameters :
[timeout = <number{0-100000}>]
Timeout in seconds for the dynamic entries.
eth bridge dynvlan delete
Delete a dynamic VLAN membership entry.
Syntax : delete id = <number{0-100000}>

Parameters :
id = <number{0-100000}>
eth bridge dynvlan flush
Flush all dynamic VLAN membership entries.
Syntax : flush
eth bridge dynvlan list
Display a dynamic VLAN membership entry.
Syntax : list
eth bridge filter
Following commands are available :

add : Add a filter.

list : Display the bridge filters.
delete : Delete a filter.
config : Change filter configuration
attach : Enable a filter.
detach : Disable a filter.
forwarding : Action: set forwarding configuration.
ifadd : Connect an interface with a filter.
ifdel : Remove an interface from a filter.
fwdintfadd : Add Forwarding interface: filter action.
fwdintfdel : Remove Forwarding interface: filter action.
eth bridge filter add
Add a filter.
Syntax : add brname = <{bridge}> name = <string> [filter = <{}>]

Parameters :
brname = <{bridge}>
The name of an bridge.
name = <string>
The name of the filter.
[filter = <{}>]
Ethernet filter to used
eth bridge filter attach
Enable a filter.
Syntax : attach brname = <{bridge}> name = <{}>

Parameters :
brname = <{bridge}>
The name of an bridge.
name = <{}>
The name of the filter to configure.
eth bridge filter config
Change filter configuration
Syntax : config brname = <{bridge}> name = <{}> [filter = <{}>]

Parameters :
brname = <{bridge}>
The name of an bridge.
name = <{}>
The name of the filter to configure.
[filter = <{}>]
Ethernet filter to used
eth bridge filter delete
Delete a filter.
Syntax : delete brname = <{bridge}> name = <{}>

Parameters :
brname = <{bridge}>
The name of an bridge.
name = <{}>
The name of the filter to configure.
eth bridge filter detach
Disable a filter.
Syntax : detach brname = <{bridge}> name = <{}>

Parameters :
brname = <{bridge}>
The name of an bridge.
name = <{}>
The name of the filter to configure.
eth bridge filter forwarding
Action: set forwarding configuration.
Syntax : forwarding brname = <{bridge}> name = <{}>
mode = <{ToFwdIntfsOnly|AlsoToFwdIntfs|NotToFwdIntfs|
Drop}>

Parameters :
brname = <{bridge}>
The name of an bridge.
name = <{}>
The name of the filter to configure.
mode = <{ToFwdIntfsOnly|AlsoToFwdIntfs|NotToFwdIntfs|Drop}>
The forwarding type to set.
eth bridge filter fwdintfadd
Add Forwarding interface: filter action.
Syntax : fwdintfadd brname = <{bridge}> name = <{}>
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|
virt}>

Parameters :
brname = <{bridge}>
The name of an bridge.
name = <{}>
The name of the filter to configure.
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The name of the bridge interface to add.
eth bridge filter fwdintfdel
Remove Forwarding interface: filter action.
Syntax : fwdintfdel brname = <{bridge}> name = <{}>
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|
virt}>

Parameters :
brname = <{bridge}>
The name of an bridge.
name = <{}>
The name of the filter to configure.
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The name of the bridge interface to remove.
eth bridge filter ifadd
Connect an interface with a filter.
Syntax : ifadd brname = <{bridge}> name = <{}>
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>

Parameters :
brname = <{bridge}>
The name of an bridge.
name = <{}>
The name of the filter to configure.
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The name of the bridge interface to add.
eth bridge filter ifdel
Remove an interface from a filter.
Syntax : ifdel brname = <{bridge}> name = <{}>
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>

Parameters :
brname = <{bridge}>
The name of an bridge.
name = <{}>
The name of the filter to configure.
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The name of the bridge interface to remove.
eth bridge filter list
Display the bridge filters.
Syntax : list brname = <{bridge}> [name = <{}>]
[expand = <{disabled|enabled}>]

Parameters :
brname = <{bridge}>
The name of an bridge.
[name = <{}>]
The name of an filter.
[expand = <{disabled|enabled}>]
Expanded listing.
eth bridge flush
Flush all bridge instances with their interfaces and properties.
Syntax : flush [brname = <{bridge}>]

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
eth bridge ifadd
Add a new bridge interface.
Syntax : ifadd [brname = <{bridge}>] intf = <string>

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
intf = <string>
The new bridge interface name.
eth bridge ifattach
Attach a bridge interface.
Syntax : ifattach [brname = <{bridge}>] intf = <{}>

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
intf = <{}>
The name of the bridge interface.
eth bridge ifconfig
Modify a bridge interface configuration.
Syntax : ifconfig [brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>

[dest = <{}>]
[portstate = <{disabled|learning|forwarding}>]
[retry = <number{0-65535}>]
[priotag = <{disabled|enabled}>]
[vlan = <{default|WAN|VOIP}>]
[prioconfig = <{disabled|overwrite|increase}>]
[ipprec = <{disabled|precedence|dscp}>]
[priority = <number{0-7}>] [regenprio = <string>]
[ingressfiltering = <{disabled|enabled}>]
[acceptvlanonly = <{disabled|enabled}>]
[mcastfilter = <{disabled|enabled}>]
[dynvlan = <{disabled|enabled|switched}>]
[wan = <{disabled|enabled}>]
[igmpsnooping = <{disabled|enabled}>]
[priotransparent = <{disabled|enabled}>]
[bpdufiltering = <{disabled|enabled}>]
[xtratagging = <{none|c-vlan|s-vlan}>]

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The name of the bridge interface to configure.
[dest = <{}>]
The destination for this interface. Typically an ATM or a physical
interface name.
[portstate = <{disabled|learning|forwarding}>]
The bridge portstate for this interface.
[retry = <number{0-65535}>]
The number of WAN connection setup retries before giving up.
[priotag = <{disabled|enabled}>]
Enable/Disable priority tagging.
[vlan = <{default|WAN|VOIP}>]
The default VLAN.
[prioconfig = <{disabled|overwrite|increase}>]
The priority configuration for this interface.
[ipprec = <{disabled|precedence|dscp}>]
The IP precedence for this interface.
[priority = <number{0-7}>]
The default priority for untagged ingress packets.
[regenprio = <string>]
The priority regeneration table for tagged ingress packets.
[ingressfiltering = <{disabled|enabled}>]
Enable/disable discard of tagged ingress packets if the interface is not
part of the VLAN.
[acceptvlanonly = <{disabled|enabled}>]
Enable/disable receipt of tagged ingress packets.
[mcastfilter = <{disabled|enabled}>]
Enable/disable discard of multicast packets for this interface.
[dynvlan = <{disabled|enabled|switched}>]
Change dynamic VLAN membership checking mechanism for this interface.
[wan = <{disabled|enabled}>]
Enable/disable WAN for this interface.
[igmpsnooping = <{disabled|enabled}>]
Enable/disable IGMP snooping for this interface.
[priotransparent = <{disabled|enabled}>]
Enable/disable priority preservation for this interface.
[bpdufiltering = <{disabled|enabled}>]
Enable/disable BPDU filtering for this interface.
[xtratagging = <{none|c-vlan|s-vlan}>]
The 'extra tagging mode' for this interface (none, c-vlan or s-vlan).
[dyngroup = <{(HIDDEN)}>]
(HIDDEN)
eth bridge ifdelete
Delete a bridge interface.
Syntax : ifdelete [brname = <{bridge}>]
intf = <{ethport1|ethport2|ethport3|ethport4|WLAN|virt}>

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
intf = <{ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The name of the bridge interface.
eth bridge ifdetach
Detach a bridge interface.
Syntax : ifdetach [brname = <{bridge}>]
intf = <{ethport1|ethport2|ethport3|ethport4|WLAN|virt}>

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
intf = <{ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The name of the bridge interface.
eth bridge ifflush
flush the bridge interfaces: detach/delete all interfaces.
Syntax : ifflush [brname = <{bridge}>]

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
eth bridge iflist
Display the current bridge interfaces.
Syntax : iflist [brname = <{bridge}>]
[intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>]

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
[intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>]
The name of a bridge interface.
eth bridge igmpsnooping
Following commands are available :

config : Configure bridge instance IGMP Snooping flags.

list : Display bridge instance snooped groups.
ifconfig : Configure bridge interface IGMP snooping flags and mode.
iflist : Display bridge interface IGMP status.
clear : Clear snooping statistics.
eth bridge igmpsnooping clear
Clear snooping statistics.
Syntax : clear [brname = <{bridge}>]
[intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>]

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
[intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>]
The bridge interface currently to be cleared.
eth bridge igmpsnooping config
Configure bridge instance IGMP Snooping flags.
Syntax : config [brname = <{bridge}>] [state = <{disabled|enabled}>]
[floodrp = <{disabled|enabled}>]
[floodmcast = <{disabled|enabled}>]
[queryto = <number{0-31744}>]

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
[state = <{disabled|enabled}>]
Enable/Disable the IGMP Snooping.
[floodrp = <{disabled|enabled}>]
Enable/Disable flooding reports to all ports.
[floodmcast = <{disabled|enabled}>]
Enable/Disable flooding unregistered multicasts.
[queryto = <number{0-31744}>]
IGMP Snooping Query Interval.
eth bridge igmpsnooping ifconfig
Configure bridge interface IGMP snooping flags and mode.
Syntax : ifconfig [brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>

[portmode = <{Host|Router|Auto|None}>]
[fastleave = <{disabled|enabled}>]
[exptrack = <{disabled|enabled}>]
[mrdp = <{disabled|enabled}>] [rgmp = <{disabled|enabled}>]

Parameters :
[brname = <{bridge}>]
The bridge instance currently to be configured.
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The bridge interface currently to be configured.
[portmode = <{Host|Router|Auto|None}>]
Mode of the bridge port.
[fastleave = <{disabled|enabled}>]
Enable/Disable Fast Immediate Leave.
[exptrack = <{disabled|enabled}>]
Enable/Disable Explicit Host Tracking.
[mrdp = <{disabled|enabled}>]
Enable/Disable MRDP support.
[rgmp = <{disabled|enabled}>]
Enable/Disable RGMP support.
eth bridge igmpsnooping iflist
Display bridge interface IGMP status.
Syntax : iflist [brname = <{bridge}>]
[intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>]

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
[intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>]
The name of the bridge interface.
eth bridge igmpsnooping list
Display bridge instance snooped groups.
Syntax : list [brname = <{bridge}>]

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
eth bridge ippriomap
Modify the IP priority mappings for a bridge.
Syntax : ippriomap [brname = <{bridge}>] type = <{tos|dscp}>
tostable = <{Default|MinimizeDelay|MaximizeThroughput|
MaximizeReliability|MinimizeCost}>
dscpidx = <{dscp_0_7|dscp_8_15|dscp_16_23|dscp_24_31|
dscp_32_39|dscp_40_47|dscp_48_55|dscp_56_63}>
precedencemap = <string>

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
type = <{tos|dscp}>
For which IP priority type to adapt the precedencemap.
tostable = <{Default|MinimizeDelay|MaximizeThroughput|MaximizeReliability|
MinimizeCost}>
TOS table type to edit.
dscpidx = <{dscp_0_7|dscp_8_15|dscp_16_23|dscp_24_31|dscp_32_39|dscp_40_47|
dscp_48_55|dscp_56_63}>
Index in the DSCP table to edit.
precedencemap = <string>
The IP priority precedence mapping values.
eth bridge ippriomapreset
Reset the IP priority mappings to its defaults.
Syntax : ippriomapreset [brname = <{bridge}>] type = <{tos|dscp}>

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
type = <{tos|dscp}>
For which IP priority type to reset the precedencemap.
eth bridge list
Display the current bridge instances.
Syntax : list [brname = <{bridge}>]

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
eth bridge macadd
Add a static MAC address to a bridge interface.
Syntax : macadd [brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
hwaddr = <hardware-address> [vlan = <{default|WAN|VOIP}>]

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The name of the bridge interface.
hwaddr = <hardware-address>
The ethernet MAC address of the new entry.
[vlan = <{default|WAN|VOIP}>]
The VLAN.
eth bridge macdelete
Remove a MAC address from the database.
Syntax : macdelete [brname = <{bridge}>] hwaddr = <hardware-address>
[vlan = <{default|WAN|VOIP}>]

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
hwaddr = <hardware-address>
The ethernet MAC address of the entry.
[vlan = <{default|WAN|VOIP}>]
The VLAN.
eth bridge maclist
Display the MAC address database.
Syntax : maclist [brname = <{bridge}>]

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
eth bridge rule
Following commands are available :

add : Add a new constraint to the VLAN learning system.

delete : Delete a constraint from the VLAN learning system.
list : Display all constraints from the VLAN learning system.
flush : Flush all constraints from the VLAN learning system.
eth bridge rule add
Add a new constraint to the VLAN learning system.
Syntax : add type = <{shared|independant}> vlan = <{default|WAN|VOIP}>
[vlan2 = <{default|WAN|VOIP}>] [isi = <number{0-32}>]

Parameters :
type = <{shared|independant}>
Type of constraint.
vlan = <{default|WAN|VOIP}>
The VLAN where the constraint belongs to.
[vlan2 = <{default|WAN|VOIP}>]
The second VLAN for a shared constraint.
[isi = <number{0-32}>]
The indenpendent set id for an independent constraint.
eth bridge rule delete
Delete a constraint from the VLAN learning system.
Syntax : delete index = <number{0-32}>

Parameters :
index = <number{0-32}>
Index of the constraint.
eth bridge rule flush
Flush all constraints from the VLAN learning system.
Syntax : flush
eth bridge rule list
Display all constraints from the VLAN learning system.
Syntax : list
eth bridge select
Select the default bridge for configuring interfaces from (if not setting
bridge name, for legacy purposes).
Syntax : select brname = <{bridge}>

Parameters :
brname = <{bridge}>
The name of a bridge instance.
eth bridge unknownvlan
Following commands are available :

ifadd : Add bridge interface to unknown 'VLAN'.

ifdelete : Delete bridge interface from unknown 'VLAN'.
ifconfig : Modify bridge interface from unknown 'VLAN'.
iflist : Display all interfaces of the unknown 'VLAN'.
eth bridge unknownvlan ifadd
Add bridge interface to unknown 'VLAN'.
Syntax : ifadd [brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
[untagged = <{disabled|enabled}>]

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The name of the bridge interface to add to the unknown 'VLAN'.
[untagged = <{disabled|enabled}>]
Enable/disable interface as untagged for this unknown 'VLAN'.
eth bridge unknownvlan ifconfig
Modify bridge interface from unknown 'VLAN'.
Syntax : ifconfig [brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>

[untagged = <{disabled|enabled}>]

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The bridge interface from the unknown 'VLAN' to configure.
[untagged = <{disabled|enabled}>]
Enable/disable interface as untagged for this unknown 'VLAN'.
eth bridge unknownvlan ifdelete
Delete bridge interface from unknown 'VLAN'.
Syntax : ifdelete [brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The name of the bridge interface to remove from the unknown 'VLAN'.
eth bridge unknownvlan iflist
Display all interfaces of the unknown 'VLAN'.
Syntax : iflist
eth bridge vlan
Following commands are available :

ifadd : Add bridge interface to virtual LAN.

ifdelete : Delete bridge interface from virtual LAN.
ifconfig : Modify bridge interface from virtual LAN.
iflist : Display all vitual LAN's.
eth bridge vlan ifadd
Add bridge interface to virtual LAN.
Syntax : ifadd name = <{default|WAN|VOIP}>
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
[untagged = <{disabled|enabled}>]

Parameters :
name = <{default|WAN|VOIP}>
The VLAN name.
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The name of the bridge interface to add to the VLAN.
[untagged = <{disabled|enabled}>]
Enable/disable interface as untagged for this VLAN.
eth bridge vlan ifconfig
Modify bridge interface from virtual LAN.
Syntax : ifconfig name = <{default|WAN|VOIP}>
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>

untagged = <{disabled|enabled}>

Parameters :
name = <{default|WAN|VOIP}>
The VLAN name.
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The bridge interface from the VLAN to configure.
untagged = <{disabled|enabled}>
Enable/disable interface as untagged for this VLAN.
eth bridge vlan ifdelete
Delete bridge interface from virtual LAN.
Syntax : ifdelete name = <{default|WAN|VOIP}>
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>

Parameters :
name = <{default|WAN|VOIP}>
The VLAN name.
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The name of the bridge interface to remove from the VLAN.
eth bridge vlan iflist
Display all vitual LAN's.
Syntax : iflist
eth bridge xtratag
Following commands are available :

add : Add an extra tag mapping entry.

delete : Delete an extra tag mapping entry.
config : Configure an extra tag mapping entry.
list : Display all extra tag mapping entries.
flush : Flush all extra tag mapping entries.
eth bridge xtratag add
Add an extra tag mapping entry.
Syntax : add [brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
innervid = <{[1-4094]|all|}>
outervid = <{[1-4094]|notag|transparent|}>

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The name of the bridge interface.
innervid = <{[1-4094]|all|}>
The inner VLAN id [all,1-4094] (all = all inner vid will be translated to
the outer vid).
outervid = <{[1-4094]|notag|transparent|}>
The outer VLAN id [notag,1-4094,transparent] (notag: outer not tagged,
transparent: tagged as inner).
eth bridge xtratag config
Configure an extra tag mapping entry.
Syntax : config [brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
innervid = <{[1-4094]|all|}>
outervid = <{[1-4094]|notag|transparent|}>

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The name of the bridge interface.
innervid = <{[1-4094]|all|}>
The inner VLAN id [all,1-4094] (all = all inner vid will be translated to
the outer vid).
outervid = <{[1-4094]|notag|transparent|}>
The outer VLAN id [notag,1-4094,transparent] (notag: outer not tagged,
transparent: tagged as inner).
eth bridge xtratag delete
Delete an extra tag mapping entry.
Syntax : delete [brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
innervid = <{[1-4094]|all|}>

Parameters :
[brname = <{bridge}>]
The name of a bridge instance.
intf = <{OBC|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The name of the bridge interface.
innervid = <{[1-4094]|all|}>
The inner VLAN id [all,1-4094] (all = all inner vid will be translated to
the outer vid).
eth bridge xtratag flush
Flush all extra tag mapping entries.
Syntax : flush
eth bridge xtratag list
Display all extra tag mapping entries.
Syntax : list
eth device
Following commands are available :

ifconfig : Configure an Ethernet port's type setting (disable/enable

autonegotiation).
ifrestart : Reset an Ethernet port and restart autonegotiation.
ifautoneg : Adapt/list an Ethernet port's autonegotiation parameters
(if autonegotiation is enabled).
iflist : Show all Ethernet ports' operational status.
eth device ifautoneg
Adapt/list an Ethernet port's autonegotiation parameters (if autonegotiation
is enabled).
Syntax : ifautoneg intf = <{ethif1|ethif2|ethif3|ethif4|}>
[speed = <{auto|10Mb|100Mb|1Gb}>]
[duplex = <{auto|half|full}>]
[pause = <{none|asym|sym|both}>]

Parameters :
intf = <{ethif1|ethif2|ethif3|ethif4|}>
The Ethernet port's name to adapt or show info from.
[speed = <{auto|10Mb|100Mb|1Gb}>]
The speed mode.
[duplex = <{auto|half|full}>]
The duplex mode.
[pause = <{none|asym|sym|both}>]
The flow-control mode.
eth device ifconfig
Configure an Ethernet port's type setting (disable/enable autonegotiation).
Syntax : ifconfig intf = <{ethif1|ethif2|ethif3|ethif4|}>
[state = <{enabled|disabled}>]
[type = <{auto|10BaseTHD|10BaseTFD|100BaseTHD|100BaseTFD}>]
[mtu = <number{1518-1534}>]

Parameters :
intf = <{ethif1|ethif2|ethif3|ethif4|}>
The Ethernet port's name.
[state = <{enabled|disabled}>]
The port's administrative state.
[type = <{auto|10BaseTHD|10BaseTFD|100BaseTHD|100BaseTFD}>]
The port's type setting. If auto, then autonegotiation will be used, if
something else, then autonegotiation will be disabled. Be careful with
using this command: a wrong type setting make you loose the link. Use the
autonegotian settings command instead: this is much more reliable!
[mtu = <number{1518-1534}>]
The MTU for this Ethernet port.
eth device iflist
Show all Ethernet ports' operational status.
Syntax : iflist
eth device ifrestart
Reset an Ethernet port and restart autonegotiation.
Syntax : ifrestart intf = <{ethif1|ethif2|ethif3|ethif4|}>

Parameters :
intf = <{ethif1|ethif2|ethif3|ethif4|}>
The Ethernet port's to be reset (restart autonegotiation).
eth efm
Following commands are available :

iflist : Display the EFM interfaces.

ifreset : Delete all configuration related to this EFM interface.
flush : Flush all EFM interfaces.

Following command groups are available :

qos
eth efm flush
Flush all EFM interfaces.
Syntax : flush
eth efm iflist
Display the EFM interfaces.
Syntax : iflist [intf = <{efmif1}>]

Parameters :
[intf = <{efmif1}>]
The name of an EFM interface.
eth efm ifreset
Delete all configuration related to this EFM interface.
Syntax : ifreset intf = <{efmif1}>

Parameters :
intf = <{efmif1}>
The name of an EFM interface to be reset.
eth efm qos
Following commands are available :

config : Configure Qos entry of EFM interface.

list : Display the Qos list.

Following command groups are available :

queue
eth efm qos config
Configure Qos entry of EFM interface.
Syntax : config intf = <{efmif1}> [queues = <number{0-8}>]
[priority = <{strict|cwrr|pwrr|wfq}>]

Parameters :
intf = <{efmif1}>
The name of the EFM Interface.
[queues = <number{0-8}>]
Number of Transmit Queue of the EFM Interface (default=1)
[priority = <{strict|cwrr|pwrr|wfq}>]
The weight of this queue used for Strict Priority, WFQ, CWRR or PWRR.
(default=strict priority)
eth efm qos list
Display the Qos list.
Syntax : list [intf = <{shp_efmif1}>]

Parameters :
[intf = <{shp_efmif1}>]
The name of the EFM Interface.
eth efm qos queue
Following commands are available :

config : Configure TX Queue entry.

list : Display the Qos list.
eth efm qos queue config
Configure TX Queue entry.
Syntax : config intf = <{queue_e0|queue_e1|queue_e2|queue_e3|queue_e4|
queue_e5}>
[weight = <number{0-64}>] [subprio = <number{0-8}>]
[maxpackets = <number{0-2500}>] [loprio = <number{0-15}>]
[hiprio = <number{0-15}>]

Parameters :
intf = <{queue_e0|queue_e1|queue_e2|queue_e3|queue_e4|queue_e5}>
The name of the Transmit Queue.
[weight = <number{0-64}>]
Weight value of the chosen weight algorithm.
[subprio = <number{0-8}>]
Sub Priority of the queue, evaluated against other channels when strict
priority is chosen.
[maxpackets = <number{0-2500}>]
The maximum number of packets in the queues.
[loprio = <number{0-15}>]
The lowest internal priority boundary for entering this queue.
[hiprio = <number{0-15}>]
The highest internal priority boundary for entering this queue.
eth efm qos queue list
Display the Qos list.
Syntax : list [intf = <{shp_efmif1}>]

Parameters :
[intf = <{shp_efmif1}>]
The name of the EFM Interface.
eth filter
Following command groups are available :

operand template
eth filter operand
Following commands are available :

add : Add a filter operand.

config : Set the operand to a certain type (will reset content
first).
delete : Delete a filter operand.
reset : Reset an operand to its default initial state (removes all
content, set to undefined type).
list : Display the filter operands.
vidadd : Add another VID in the set.
viddelete : Delete a VID from the set.
frameclassadd : Add another frameclass in the set.
frameclassdelete : Delete a frameclasse from the set.
ipprotoadd : Add another ip protocol in the set.
ipprotodelete : Delete a ip protocol from the set.
priorityadd : Add another priority in the set.
prioritydelete : Delete a ip priority from the set.
flush : Remove all filter operands (this will only delete the ones
not in use: flush filters first).
eth filter operand add
Add a filter operand.
Syntax : add operand = <string>

Parameters :
operand = <string>
The name of the new operand operand.
eth filter operand config
Set the operand to a certain type (will reset content first).
Syntax : config operand = <{}>
type = <{CheckDAClass|CheckFrameClass|CheckVLANPriority|
CheckVID|CheckIPProto|CheckSize|Match|Modify|
CheckCheckSum|UpdateCheckSum}>
operator = <{Equal|Less|LessEqual|InSet}>
protocollevel = <{EthernetFrame|Protocol|EthernetPayload|
ULPHeader|ULPPayload}>
length = <number> mask = <string> value = <string>
daclass = <{Unicast|Multicast|Broadcast}>
[frameclass = <{Eth2|SNAPEType|SNAP8021H|SNAPOther|LLCNLPID|
LLCOther}>]
[ipprotocol = <number{0-254}>]
action = <{Delete|Insert|Modify}> offset = <number>
[priority = <number{0-7}>] size = <number>
[vid = <number{1-4095}>] protocol = <{IP|UpperLayer}>

Parameters :
operand = <{}>
The name of an operand.
type = <{CheckDAClass|CheckFrameClass|CheckVLANPriority|CheckVID|
CheckIPProto|CheckSize|Match|Modify|CheckCheckSum|UpdateCheckSum}>
The type to set.
operator = <{Equal|Less|LessEqual|InSet}>
The compare operator.
protocollevel = <{EthernetFrame|Protocol|EthernetPayload|ULPHeader|
ULPPayload}>
The protocol level from where to start offset/size calculations.
length = <number>
The length of the compare value/mask combination in bytes..
mask = <string>
The mask to be used on the value.
value = <string>
The value.
daclass = <{Unicast|Multicast|Broadcast}>
The destination address class.
[frameclass = <{Eth2|SNAPEType|SNAP8021H|SNAPOther|LLCNLPID|LLCOther}>]
The Ethernet frame class to filter on.
[ipprotocol = <number{0-254}>]
The IP protocol to filter on.
action = <{Delete|Insert|Modify}>
The action to undertake with matching filter..
offset = <number>
At which offset from protocol level in bytes the Match/Modify action
should start (in bytes).
[priority = <number{0-7}>]
The VLAN priority to filter on.
size = <number>
The size of the frame at this protocol level.
[vid = <number{1-4095}>]
The VID to filter on.
protocol = <{IP|UpperLayer}>
The protocol level of the checksum.
eth filter operand delete
Delete a filter operand.
Syntax : delete operand = <{}>

Parameters :
operand = <{}>
The name of the operand to delete.
eth filter operand flush
Remove all filter operands (this will only delete the ones not in use: flush
filters first).
Syntax : flush
eth filter operand frameclassadd
Add another frameclass in the set.
Syntax : frameclassadd operand = <{}>
frameclass = <{Eth2|SNAPEType|SNAP8021H|SNAPOther|
LLCNLPID|LLCOther}>

Parameters :
operand = <{}>
The name of an operand.
frameclass = <{Eth2|SNAPEType|SNAP8021H|SNAPOther|LLCNLPID|LLCOther}>
The frame class to add.
eth filter operand frameclassdelete
Delete a frameclasse from the set.
Syntax : frameclassdelete operand = <{}>
frameclass = <{Eth2|SNAPEType|SNAP8021H|SNAPOther|
LLCNLPID|LLCOther}>

Parameters :
operand = <{}>
The name of an operand.
frameclass = <{Eth2|SNAPEType|SNAP8021H|SNAPOther|LLCNLPID|LLCOther}>
The frameclass to remove.
eth filter operand ipprotoadd
Add another ip protocol in the set.
Syntax : ipprotoadd operand = <{}> ipprotocol = <number{0-255}>

Parameters :
operand = <{}>
The name of an operand.
ipprotocol = <number{0-255}>
The IP protocol to add.
eth filter operand ipprotodelete
Delete a ip protocol from the set.
Syntax : ipprotodelete operand = <{}> ipprotocol = <{}>

Parameters :
operand = <{}>
The name of an operand.
ipprotocol = <{}>
The IP protocol to remove.
eth filter operand list
Display the filter operands.
Syntax : list [operand = <{}>] [expand = <{disabled|enabled}>]

Parameters :
[operand = <{}>]
The name of an operand.
[expand = <{disabled|enabled}>]
Expanded listing.
eth filter operand priorityadd
Add another priority in the set.
Syntax : priorityadd operand = <{}> priority = <number{0-7}>

Parameters :
operand = <{}>
The name of an operand.
priority = <number{0-7}>
The vlan priority to add.
eth filter operand prioritydelete
Delete a ip priority from the set.
Syntax : prioritydelete operand = <{}> priority = <{}>

Parameters :
operand = <{}>
The name of an operand.
priority = <{}>
The vlan priority to remove.
eth filter operand reset
Reset an operand to its default initial state (removes all content, set to
undefined type).
Syntax : reset operand = <{}>

Parameters :
operand = <{}>
The name of an operand.
eth filter operand vidadd
Add another VID in the set.
Syntax : vidadd operand = <{}> vid = <number{1-4095}>

Parameters :
operand = <{}>
The name of an operand.
vid = <number{1-4095}>
The VID to add.
eth filter operand viddelete
Delete a VID from the set.
Syntax : viddelete operand = <{}> vid = <{}>

Parameters :
operand = <{}>
The name of an operand.
vid = <{}>
The VID to remove.
eth filter template
Following commands are available :

add : Add a filter.

list : Display the filters.
delete : Delete a filter.
config : Config a filter.
setvid : Action: enable/disable VID derivation
setpriority : Action: enable/disable priority derivation
ruleadd : Connect an operand rule with a filter.
rulemodify : Modify an operand rule from a filter.
ruledel : Remove an operand rule from a filter.
flush : Remove all filters.
eth filter template add
Add a filter.
Syntax : add filter = <string> [location = <{Ingress|Egress|VID|Priority}>]
[level = <number{0-65535}>] [tracing = <{disabled|enabled}>]
[mark = <{disabled|enabled}>]

Parameters :
filter = <string>
The name of the filter.
[location = <{Ingress|Egress|VID|Priority}>]
The filter location.
[level = <number{0-65535}>]
The filter level (lower level is processed first = priority)
[tracing = <{disabled|enabled}>]
Enable/disabled tracing of packets
[mark = <{disabled|enabled}>]
Enable/disabled marking of packets
eth filter template config
Config a filter.
Syntax : config filter = <{}> [location = <{Ingress|Egress|VID|Priority}>]
[level = <number{0-65535}>] [tracing = <{disabled|enabled}>]
[mark = <{disabled|enabled}>]

Parameters :
filter = <{}>
The name of an filter.
[location = <{Ingress|Egress|VID|Priority}>]
The filter location.
[level = <number{0-65535}>]
The filter level (lower level is processed first = priority)
[tracing = <{disabled|enabled}>]
Enable/disabled tracing of packets
[mark = <{disabled|enabled}>]
Enable/disabled marking of packets
eth filter template delete
Delete a filter.
Syntax : delete filter = <{}>

Parameters :
filter = <{}>
The name of an filter.
eth filter template flush
Remove all filters.
Syntax : flush
eth filter template list
Display the filters.
Syntax : list [filter = <{}>] [expand = <{disabled|enabled}>]

Parameters :
[filter = <{}>]
The name of an filter.
[expand = <{disabled|enabled}>]
Expanded listing.
eth filter template ruleadd
Connect an operand rule with a filter.
Syntax : ruleadd filter = <{}> operand = <{}> [negate = <{disabled|enabled}>]
[order = <number{-100-100}>] [operator = <{Ignore|AND|OR}>]

Parameters :
filter = <{}>
The name of an filter.
operand = <{}>
The name of the operand to connect with.
[negate = <{disabled|enabled}>]
negate or not the operand outcome.
[order = <number{-100-100}>]
The operand order in thes filter (lower order is processed first =
priority)
[operator = <{Ignore|AND|OR}>]
Operand operator.
eth filter template ruledel
Remove an operand rule from a filter.
Syntax : ruledel filter = <{}> ruleid = <{}>

Parameters :
filter = <{}>
The name of an filter.
ruleid = <{}>
The name of the operand to remove.
eth filter template rulemodify
Modify an operand rule from a filter.
Syntax : rulemodify filter = <{}> ruleid = <{}> [operand = <{}>]
[negate = <{disabled|enabled}>]
[order = <number{-100-100}>]
[operator = <{Ignore|AND|OR}>]

Parameters :
filter = <{}>
The name of an filter.
ruleid = <{}>
The name of the operand to remove.
[operand = <{}>]
The name of the operand to connect with.
[negate = <{disabled|enabled}>]
negate or not the operand outcome.
[order = <number{-100-100}>]
The operand order in thes filter (lower order is processed first =
priority)
[operator = <{Ignore|AND|OR}>]
Operand operator.
eth filter template setpriority
Action: enable/disable priority derivation
Syntax : setpriority filter = <{}> [state = <{disabled|enabled}>]
priority = <number{0-15}>

Parameters :
filter = <{}>
The name of an filter.
[state = <{disabled|enabled}>]
Enable/disabled priority derivation for this filters
priority = <number{0-15}>
The priority to set in the derivation.
eth filter template setvid
Action: enable/disable VID derivation
Syntax : setvid filter = <{}> [state = <{disabled|enabled}>]
vid = <number{1-4095}>

Parameters :
filter = <{}>
The name of an filter.
[state = <{disabled|enabled}>]
Enable/disabled VID derivation for this filters
vid = <number{1-4095}>
The VID to set in the derivation.
eth flush
Flush all ETH interfaces.
Syntax : flush
eth ifadd
Create a new ETH interface.
Syntax : ifadd intf = <string>

Parameters :
intf = <string>
The name for the new ETH interface.
eth ifattach
Attach an ETH interface.
Syntax : ifattach intf = <{}>

Parameters :
intf = <{}>
The name of the ETH interface.
eth ifconfig
Modify an ETH interface.
Syntax : ifconfig intf = <{eth_DEFAULT|eth_WAN|eth_VOIP}>
[dest = <{bridge|eth_DEFAULT|eth_WAN|eth_VOIP}>]
[retry = <number{0-65535}>] [wan = <{disabled|enabled}>]
[priotag = <{disabled|enabled}>]
[vlan = <{default|WAN|VOIP}>]

Parameters :
intf = <{eth_DEFAULT|eth_WAN|eth_VOIP}>
The name of the ETH interface to configure.
[dest = <{bridge|eth_DEFAULT|eth_WAN|eth_VOIP}>]
The destination interface for this ETH interface.
[retry = <number{0-65535}>]
The number of times the ETH connection setup should retry before giving
up.
[wan = <{disabled|enabled}>]
Enable/Disable WAN for this ETH interface.
[priotag = <{disabled|enabled}>]
Enable/Disable VLAN priority tagging.
[vlan = <{default|WAN|VOIP}>]
The VLAN for this ETH interface.
eth ifdelete
Delete an ETH interface.
Syntax : ifdelete intf = <{eth_DEFAULT|eth_WAN|eth_VOIP}>

Parameters :
intf = <{eth_DEFAULT|eth_WAN|eth_VOIP}>
The name of the ETH interface.
eth ifdetach
Detach an ETH interface.
Syntax : ifdetach intf = <{eth_DEFAULT|eth_WAN|eth_VOIP}>

Parameters :
intf = <{eth_DEFAULT|eth_WAN|eth_VOIP}>
The name of the ETH interface.
eth iflist
Display the ETH interfaces.
Syntax : iflist [intf = <{eth_DEFAULT|eth_WAN|eth_VOIP}>]

Parameters :
[intf = <{eth_DEFAULT|eth_WAN|eth_VOIP}>]
The name of an ETH interface.
eth oam
Following commands are available :

add : Enable Ethernet OAM (E-OAM) on an interface.

config : Modify global E-OAM configuration.
configlist : Display global E-OAM configuration.
delete : Disable E-OAM on an interface.
ef-event : Configure Errored Frame Event.
efp-event : Configure Errored Frame Period Event.
efss-event : Configure Errored Frame Seconds Summary Event.
esp-event : Configure Errored Symbol Period Event.
linkmonitor : Configure the link monitor.
list : Display the E-OAM configuration of an interface(s).
loopback : Enable/disable E-OAM remote loopback for an interface.
loopback-tg : Generate traffic for the E-OAM loopback.
modify : Modify E-OAM configuration for an interface.
stats : Display the E-OAM statistics of an interface.
varname : Retrieve a variable by name from the remote node.
varnbr : Retrieve a variable by Branch/Leaf from the remote node.

Following command groups are available :

debug
eth oam add
Enable Ethernet OAM (E-OAM) on an interface.
Syntax : add ifname = <{eth_DEFAULT|ethport1|ethport2|ethport3|ethport4|WLAN|
virt}>

Parameters :
ifname = <{eth_DEFAULT|ethport1|ethport2|ethport3|ethport4|WLAN|virt}>
The interface for which to add E-OAM support.
eth oam config
Modify global E-OAM configuration.
Syntax : config [state = <{disabled|enabled}>]
[max-pdu-rate = <number{1-100}>] [mru = <number{64-1518}>]
[tx-timeout = <number{1-86400}>]
[ll-timeout = <number{1-86400}>] [oui = <string>]
[vendor-code = <number or string>]
[mode = <{passive|active}>]
[unidirectional = <{disabled|enabled}>]
[loopback = <{disabled|enabled}>]
[link-event = <{disabled|enabled}>]
[var-response = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/disable E-OAM.
[max-pdu-rate = <number{1-100}>]
Maximum number of PDUs per second.
[mru = <number{64-1518}>]
Maximum Receive Unit.
[tx-timeout = <number{1-86400}>]
Transmission timeout.
[ll-timeout = <number{1-86400}>]
Local Lost Link timeout.
[oui = <string>]
OUI to be used in Information OAM PDUs (system OUI if left blank).
[vendor-code = <number or string>]
Vendor Specific Information.
[mode = <{passive|active}>]
E-OAM operational mode.
[unidirectional = <{disabled|enabled}>]
E-OAM unidirectional capability.
[loopback = <{disabled|enabled}>]
E-OAM loopback capability.
[link-event = <{disabled|enabled}>]
E-OAM link event capability.
[var-response = <{disabled|enabled}>]
E-OAM variable response capability.
eth oam configlist
Display global E-OAM configuration.
Syntax : configlist
eth oam debug
Following commands are available :

configlist : Display E-OAM debug configuration.

nc-events : Generate non critical event errors.
traceconfig : Modify E-OAM trace level.
eth oam debug configlist
Display E-OAM debug configuration.
Syntax : configlist
eth oam debug nc-events
Generate non critical event errors.
Syntax : nc-events state = <{disabled|enabled}>

Parameters :
state = <{disabled|enabled}>
Enable/disable the nc-event-error generator.
eth oam debug traceconfig
Modify E-OAM trace level.
Syntax : traceconfig level = <number{0-15}>

Parameters :
level = <number{0-15}>
E-OAM trace level.
eth oam delete
Disable E-OAM on an interface.
Syntax : delete ifname = <{}>

Parameters :
ifname = <{}>
The interface for which to remove E-OAM support.
eth oam ef-event
Configure Errored Frame Event.
Syntax : ef-event ifname = <{}> [window = <number{10-65535}>]
[threshold = <number{0-65535}>]

Parameters :
ifname = <{}>
The interface for which to configure link event.
[window = <number{10-65535}>]
Errored Frame Event window (x 100ms) - standardized range: 100 - 600.
[threshold = <number{0-65535}>]
Errored Frame Event threshold.
eth oam efp-event
Configure Errored Frame Period Event.
Syntax : efp-event ifname = <{}> [window = <number{15-65535}>]
[threshold = <number{0-65535}>]

Parameters :
ifname = <{}>
The interface for which to configure link event.
[window = <number{15-65535}>]
Errored Frame Period Event window (x10E+4 frames) - standardized range: 1
- 900 (100Base-T).
[threshold = <number{0-65535}>]
Errored Frame Period Event threshold.
eth oam efss-event
Configure Errored Frame Seconds Summary Event.
Syntax : efss-event ifname = <{}> [window = <number{10-65535}>]
[threshold = <number{0-65535}>]

Parameters :
ifname = <{}>
The interface for which to configure link event.
[window = <number{10-65535}>]
Errored Frame Seconds Summary Event window (x 100ms) - standardized
range: 100 - 9000.
[threshold = <number{0-65535}>]
Errored Frame Seconds Summary Event threshold.
eth oam esp-event
Configure Errored Symbol Period Event.
Syntax : esp-event ifname = <{}> [window = <number{25-65535}>]
[threshold = <number{0-65535}>]

Parameters :
ifname = <{}>
The interface for which to configure link event.
[window = <number{25-65535}>]
Errored Symbol Period Event window (x10E+6 symbols) - standardized range:
25 - 1500 (100Base-T).
[threshold = <number{0-65535}>]
Errored Symbol Period Event threshold.
eth oam linkmonitor
Configure the link monitor.
Syntax : linkmonitor [state = <{disabled|enabled}>]
[poll-period = <number{1-60}>]
[retransmit-count = <number{0-5}>]
[ef-window = <number{10-65535}>]
[ef-threshold = <number{0-65535}>]
[efp-window = <number{15-65535}>]
[efp-threshold = <number{0-65535}>]
[efss-window = <number{10-65535}>]
[efss-threshold = <number{0-65535}>]
[esp-window = <number{25-65535}>]
[esp-threshold = <number{0-65535}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/disable Link Monitor.
[poll-period = <number{1-60}>]
Link polling period (in seconds).
[retransmit-count = <number{0-5}>]
Notification events retransmit count.
[ef-window = <number{10-65535}>]
Errored Frame Event window (x 100ms) - standardized range: 100 - 600.
[ef-threshold = <number{0-65535}>]
Errored Frame Event threshold.
[efp-window = <number{15-65535}>]
Errored Frame Period Event window (x10E+4 frames) - standardized range: 1
- 900 (100Base-T).
[efp-threshold = <number{0-65535}>]
Errored Frame Period Event threshold.
[efss-window = <number{10-65535}>]
Errored Frame Seconds Summary Event window (x 100ms) - standardized
range: 100 - 9000.
[efss-threshold = <number{0-65535}>]
Errored Frame Seconds Summary Event threshold.
[esp-window = <number{25-65535}>]
Errored Symbol Period Event window (x10E+6 symbols) - standardized range:
25 - 1500 (100Base-T).
[esp-threshold = <number{0-65535}>]
Errored Symbol Period Event threshold.
eth oam list
Display the E-OAM configuration of an interface(s).
Syntax : list [ifname = <{}>] [expand = <{disabled|enabled}>]

Parameters :
[ifname = <{}>]
The interface for which to list E-OAM information.
[expand = <{disabled|enabled}>]
Expand enabled/disabled.
eth oam loopback
Enable/disable E-OAM remote loopback for an interface.
Syntax : loopback ifname = <{}> [state = <{disabled|enabled}>]

Parameters :
ifname = <{}>
The interface for which to enable/disable E-OAM loopback.
[state = <{disabled|enabled}>]
Enable/disable E-OAM remote loopback.
eth oam loopback-tg
Generate traffic for the E-OAM loopback.
Syntax : loopback-tg ifname = <{}> size = <number{46-1500}>
[count = <number{0-1000}>]
[interval = <number{100-10000}>]

Parameters :
ifname = <{}>
The interface on which to generate E-OAM loopback traffic.
size = <number{46-1500}>
The payload size of the loopback frames.
[count = <number{0-1000}>]
The number of loopback frames to generate.
[interval = <number{100-10000}>]
The interval in milliseconds between frames.
eth oam modify
Modify E-OAM configuration for an interface.
Syntax : modify ifname = <{}> [state = <{disabled|enabled}>]
[max-pdu-rate = <number{1-100}>] [mru = <number{64-1518}>]
[tx-timeout = <number{1-86400}>]
[ll-timeout = <number{1-86400}>] [oui = <string>]
[vendor-code = <number or string>]
[mode = <{passive|active}>]
[unidirectional = <{disabled|enabled}>]
[loopback = <{disabled|enabled}>]
[link-event = <{disabled|enabled}>]
[var-response = <{disabled|enabled}>]

Parameters :
ifname = <{}>
The interface for which to configure E-OAM.
[state = <{disabled|enabled}>]
Enable/disable E-OAM.
[max-pdu-rate = <number{1-100}>]
Maximum number of PDUs per second.
[mru = <number{64-1518}>]
Maximum Receive Unit.
[tx-timeout = <number{1-86400}>]
Transmission timeout.
[ll-timeout = <number{1-86400}>]
Local Lost Link timeout.
[oui = <string>]
OUI to be used in Information OAM PDUs (system OUI if left blank).
[vendor-code = <number or string>]
Vendor Specific Information.
[mode = <{passive|active}>]
E-OAM operational mode.
[unidirectional = <{disabled|enabled}>]
E-OAM unidirectional capability.
[loopback = <{disabled|enabled}>]
E-OAM loopback capability.
[link-event = <{disabled|enabled}>]
E-OAM link event capability.
[var-response = <{disabled|enabled}>]
E-OAM variable response capability.
eth oam stats
Display the E-OAM statistics of an interface.
Syntax : stats ifname = <{}>

Parameters :
ifname = <{}>
The interface for which to display E-OAM statistics.
eth oam varname
Retrieve a variable by name from the remote node.
Syntax : varname ifname = <{}>
name = <{macid|frames-tx-ok|frames-rx-ok|fcs-errors|alignment-
errors|octets-tx-ok|int-mac-tx-error|octets-rx-ok|int-
mac-rx-error|mcast-tx-ok|bcast-tx-ok|mcast-rx-ok|bcast-
rx-ok|frame-too-long-errors|symbol-errors}>

Parameters :
ifname = <{}>
The interface on which to request the variable.
name = <{macid|frames-tx-ok|frames-rx-ok|fcs-errors|alignment-errors|octets-
tx-ok|int-mac-tx-error|octets-rx-ok|int-mac-rx-error|mcast-tx-ok|
bcast-tx-ok|mcast-rx-ok|bcast-rx-ok|frame-too-long-errors|symbol-
errors}>
Variable name.
eth oam varnbr
Retrieve a variable by Branch/Leaf from the remote node.
Syntax : varnbr ifname = <{}> branch = <number> leaf = <number>

Parameters :
ifname = <{}>
The interface on which to request the variable.
branch = <number>
Branch.
leaf = <number>
Leaf.
eth switch
Following commands are available :

info : Display switch capabilities

Following command groups are available :

group mirror qos shaper share

storm
eth switch group
Following commands are available :

list : List all configured groups.

move : Move a specified port to a specified group.
delete : Delete a specified port from a specified group.
flush : To set all ports to the default settings (all ports in
group 0).
eth switch group delete
Delete a specified port from a specified group.
Syntax : delete group = <number{0-5}> port = <number{1-4}>

Parameters :
group = <number{0-5}>
The group id.
port = <number{1-4}>
The port.
eth switch group flush
To set all ports to the default settings (all ports in group 0).
Syntax : flush
eth switch group list
List all configured groups.
Syntax : list
eth switch group move
Move a specified port to a specified group.
Syntax : move group = <number{0-5}> port = <number{1-4}>

Parameters :
group = <number{0-5}>
The group id.
port = <number{1-4}>
The port.
eth switch info
Display switch capabilities
Syntax : info
eth switch mirror
Following commands are available :

capture : Define the specified port to be the Mirror Capture Port.

ingress : Enable or disable the specified port to be a Received Port
Mirroring.
egress : Enable or disable the specified port to be a Transmitted
Port Mirroring.
eth switch mirror capture
Define the specified port to be the Mirror Capture Port.
Syntax : capture port = <number{1-4}>

Parameters :
port = <number{1-4}>
The port.
eth switch mirror egress
Enable or disable the specified port to be a Transmitted Port Mirroring.
Syntax : egress port = <number{1-4}> [state = <{enabled|disabled}>]

Parameters :
port = <number{1-4}>
The port.
[state = <{enabled|disabled}>]
Enable/disable state.
eth switch mirror ingress
Enable or disable the specified port to be a Received Port Mirroring.
Syntax : ingress port = <number{1-4}> [state = <{enabled|disabled}>]

Parameters :
port = <number{1-4}>
The port.
[state = <{enabled|disabled}>]
Enable/disable state.
eth switch qos
Following commands are available :

config : Configure common qos parameters.

weights : Configure the queue weights.
ifconfig : Configure per port qos parameters.
list : Display qos configuration.
eth switch qos config
Configure common qos parameters.
Syntax : config state = <{enabled|disabled}> [nbrOfQueues = <number{0-4}>]
[realtime = <{enabled|disabled}>]
[threshold = <number{0-15}>]
[rxbackpressure = <{disabled|enabled}>]
[txbackpressure = <{disabled|enabled}>]

Parameters :
state = <{enabled|disabled}>
Enable/disable QoS.
[nbrOfQueues = <number{0-4}>]
Number of queues.
[realtime = <{enabled|disabled}>]
Enable/disable realtime.
[threshold = <number{0-15}>]
Tx Qos threshold.
[rxbackpressure = <{disabled|enabled}>]
Enable/disable controlled receive from switch (OBC pauses Rx).
[txbackpressure = <{disabled|enabled}>]
Enable/disable controlled transmit to switch (switch pauses Tx).
eth switch qos ifconfig
Configure per port qos parameters.
Syntax : ifconfig port = <number{1-4}>
mode = <[+/-]flag[+/-flag...]{802.1p high diffserv tos}>
[flowcontrol = <{disabled|enabled}>]

Parameters :
port = <number{1-4}>
The port.
mode = <[+/-]flag[+/-flag...]{802.1p high diffserv tos}>
Classifier.
[flowcontrol = <{disabled|enabled}>]
Enable/disable flow-control.
eth switch qos list
Display qos configuration.
Syntax : list
eth switch qos weights
Configure the queue weights.
Syntax : weights queue0 = <number{0-100}> queue1 = <number{0-100}>
queue2 = <number{0-100}> queue3 = <number{0-100}>

Parameters :
queue0 = <number{0-100}>
Weight of queue 0 in WFQ (in %).
queue1 = <number{0-100}>
Weight of queue 1 in WFQ (in %).
queue2 = <number{0-100}>
Weight of queue 2 in WFQ (in %).
queue3 = <number{0-100}>
Weight of queue 3 in WFQ (in %).
eth switch shaper
Following commands are available :

config : Configure common ingress shaper parameters.

ifconfig : Configure per port shaper parameters.
iflist : Display shaper configuration per port.
eth switch shaper config
Configure common ingress shaper parameters.
Syntax : config shaper = <number{0-1}> [unicast = <{enabled|disabled}>]
[multicast = <{enabled|disabled}>]
[broadcast = <{enabled|disabled}>]
[control = <{enabled|disabled}>]
[unknown = <{enabled|disabled}>]
[discard = <{enabled|disabled}>]
[normalize = <{enabled|disabled}>]
[exclude_ipg = <{enabled|disabled}>]

Parameters :
shaper = <number{0-1}>
The shaper instance.
[unicast = <{enabled|disabled}>]
Shape unicast traffic.
[multicast = <{enabled|disabled}>]
Shape multicast traffic.
[broadcast = <{enabled|disabled}>]
Shape broadcast traffic.
[control = <{enabled|disabled}>]
Shape MAC control traffic.
[unknown = <{enabled|disabled}>]
Shape traffic with unknown destination address.
[discard = <{enabled|disabled}>]
Discard frame at overflow (else attempt for flow control).
[normalize = <{enabled|disabled}>]
Use relative speed calculations.
[exclude_ipg = <{enabled|disabled}>]
Exclude the Inter Packet Gap in the speed calculations.
eth switch shaper ifconfig
Configure per port shaper parameters.
Syntax : ifconfig port = <number{1-4}> ingress = <{enabled|disabled}>
shaper = <number{0-1}> [state = <{enabled|disabled}>]
[speed = <number{64000-1000000000}>]
[burstsize = <{16|20|28|40|76|140|268|500}>]

Parameters :
port = <number{1-4}>
The port.
ingress = <{enabled|disabled}>
Ingress port = enabled; egress port = disabled.
shaper = <number{0-1}>
The shaper instance.
[state = <{enabled|disabled}>]
Enable/disable shaping.
[speed = <number{64000-1000000000}>]
Speed in bits/sec.
[burstsize = <{16|20|28|40|76|140|268|500}>]
Burst size in KBytes.
eth switch shaper iflist
Display shaper configuration per port.
Syntax : iflist
eth switch share
Following commands are available :

add : Add a port to be shared.

delete : Delete a shared port.
list : Display shared ports.
eth switch share add
Add a port to be shared.
Syntax : add port = <number{1-4}> shared = <number{1-4}>

Parameters :
port = <number{1-4}>
The port.
shared = <number{1-4}>
The shared port.
eth switch share delete
Delete a shared port.
Syntax : delete port = <number{1-4}> shared = <number{1-4}>

Parameters :
port = <number{1-4}>
The port.
shared = <number{1-4}>
The shared port.
eth switch share list
Display shared ports.
Syntax : list
eth switch storm
Following commands are available :

ifconfig : Configure per port storm control parameters.

iflist : Display storm control configuration per port.
eth switch storm ifconfig
Configure per port storm control parameters.
Syntax : ifconfig port = <number{1-4}> [state = <{enabled|disabled}>]
[rate = <number{0-1000}>]
[burstsize = <{16|20|28|40|76|140|268|500}>]
[broadcast = <{enabled|disabled}>]
[multicast = <{enabled|disabled}>]
[unknown = <{enabled|disabled}>]

Parameters :
port = <number{1-4}>
The port.
[state = <{enabled|disabled}>]
Enable/disable storm control.
[rate = <number{0-1000}>]
Rate in 10ths of percent.
[burstsize = <{16|20|28|40|76|140|268|500}>]
Burst size in KBytes.
[broadcast = <{enabled|disabled}>]
Storm control for broadcast traffic.
[multicast = <{enabled|disabled}>]
Storm control for multicast traffic.
[unknown = <{enabled|disabled}>]
Storm control for traffic with unknown destination address.
eth switch storm iflist
Display storm control configuration per port.
Syntax : iflist
eth vlan
Following commands are available :

add : Add a new virtual LAN.

delete : Delete a virtual LAN.
list : Display all virtual LAN's.
flush : Flush all virtual LAN's.

Following command groups are available :

priomap
eth vlan add
Add a new virtual LAN.
Syntax : add name = <string> vid = <number{2-4094}>
[addrule = <{disabled|enabled}>]

Parameters :
name = <string>
The new VLAN name.
vid = <number{2-4094}>
The new VLAN id.
[addrule = <{disabled|enabled}>]
Add the default bridge constraint.
eth vlan delete
Delete a virtual LAN.
Syntax : delete name = <{default|WAN|VOIP}>

Parameters :
name = <{default|WAN|VOIP}>
The VLAN name.
eth vlan flush
Flush all virtual LAN's.
Syntax : flush
eth vlan list
Display all virtual LAN's.
Syntax : list
eth vlan priomap
Following commands are available :

config : Change a VLAN/DE to/from internalpriority mapping.

list : Display the VLAN/DE to/from internal priority mappings.
eth vlan priomap config
Change a VLAN/DE to/from internalpriority mapping.
Syntax : config entry = <{prio_0_7_2vlan|prio_8_15_2vlan|prio_0_7_2de|
prio_8_15_2de|vlan2prio_de_0|vlan2prio_de_1}>
priomap = <string>

Parameters :
entry = <{prio_0_7_2vlan|prio_8_15_2vlan|prio_0_7_2de|prio_8_15_2de|
vlan2prio_de_0|vlan2prio_de_1}>
Which prioritymap entry to edit.
priomap = <string>
The 8 priority mapping values.
eth vlan priomap list
Display the VLAN/DE to/from internal priority mappings.
Syntax : list
expr
Following commands are available :

add : Add an expression.

delete : Delete an expression.
modify : Modify an expression.
list : List expressions.
flush : Flush all expressions.
expr add
Add an expression.
Syntax : add name = <{wan|lan|local|tunnel|dmz|guest|voice_if|
contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253|
ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|SMB|imap|
imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|ssh|dns|nntp|
ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv|
mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP-Inc-SIP-TCP|VoIP-
Inc-RTP}>
[type = <{intf|ip|serv|mac|length}>] mac [!]= <hardware-address>
addr [!]= <ip-range> [mask [ <ip-mask(dotted or cidr)>]
[intf [!]= <{loop|Internet|LocalNetwork}>]
[intfgroup [!]= <{wan|local|lan|tunnel|dmz|guest} or number>]
[tos [!]= <number{0-255}>]
[precedence [!]= <{routine|priority|immediate|flash|flash-
override|CRITIC-ECP|internetwork-control|network-
control} or number>]
[dscp [!]= <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41|
af42|af43|cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>]

[proto [!]= <{icmp|igmp|ipinip|tcp|udp|ah|esp|ipcomp} or number>]

[srcport [!]= <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|

biff|bootpc|bootps|chargen|clearcase|daytime|
discard|dns|domain|doom|echo|exec|finger|ftp|ftp-
data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|
login|netbios-dgm|netbios-ns|netbios-ssn|netwall|
netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|
pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|
sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|
telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>]
[srcportend = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|
biff|bootpc|bootps|chargen|clearcase|daytime|
discard|dns|domain|doom|echo|exec|finger|ftp|ftp-
data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|
login|netbios-dgm|netbios-ns|netbios-ssn|netwall|
netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|
pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|
sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|
telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>]
[dstport [!]= <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|
biff|bootpc|bootps|chargen|clearcase|daytime|
discard|dns|domain|doom|echo|exec|finger|ftp|ftp-
data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|
login|netbios-dgm|netbios-ns|netbios-ssn|netwall|
netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|
pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|
sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|
telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>]
[dstportend = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|
biff|bootpc|bootps|chargen|clearcase|daytime|
discard|dns|domain|doom|echo|exec|finger|ftp|ftp-
data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|
login|netbios-dgm|netbios-ns|netbios-ssn|netwall|
netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|
pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|
sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|
telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>]
[icmptype [!]= <{echo-reply|destination-unreachable|source-quench|
redirect|echo-request|router-advertisement|router-
solicitation|time-exceeded|parameter-problems|
timestamp-request|timestamp-reply|information-
request|information-reply|address-mask-request|
address-mask-reply} or number>]
[icmpcode [!]= <number{0-15}>] [icmpcodeend = <number{0-15}>]
iplengthmin [!]= <number> [iplengthmax = <number>]

Parameters :
name = <{wan|lan|local|tunnel|dmz|guest|voice_if|contentsharing_ip|private|
ssdp_ip|mdap_ip|192.168.1.253|ftp|icmp|igmp|telnet|http|httpproxy|
https|RPC|NBT|SMB|imap|imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|
ssh|dns|nntp|ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv|
mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP-Inc-SIP-TCP|VoIP-Inc-RTP}>
The name of an expression to add.
[type = <{intf|ip|serv|mac|length}>]
The type of an expression.
mac [!]= <hardware-address>
The MAC address.
addr [!]= <ip-range>
The IP address or range.
[mask [ <ip-mask(dotted or cidr)>]
The IP mask (ignored if an IP range is provided).
[intf [!]= <{loop|Internet|LocalNetwork}>]
The IP interface name.
[intfgroup [!]= <{wan|local|lan|tunnel|dmz|guest} or number>]
The IP interface group.
[tos [!]= <number{0-255}>]
The Type Of Service specification in the IP packet.
[precedence [!]= <{routine|priority|immediate|flash|flash-override|CRITIC-
ECP|internetwork-control|network-control} or number>]
The precedence in the IP packet (part of tos).
[dscp [!]= <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41|af42|af43|
cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>]
The diffserv code point in the IP packet (part of tos).
[proto [!]= <{icmp|igmp|ipinip|tcp|udp|ah|esp|ipcomp} or number>]
The IP protocol (name or number) in the IP packet.
[srcport [!]= <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain|
doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|
ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|
ldap|login|netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-
ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|
systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>]
The TCP/UDP source port number or range begin.
[srcportend = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain|
doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|
ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|
ldap|login|netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-
ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|
systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>]
The source TCP/UDP source port range end. (inclusive)
[dstport [!]= <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain|
doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|
ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|
ldap|login|netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-
ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|
systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>]
The TCP/UDP destination port number or range begin.
[dstportend = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain|
doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|
ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|
ldap|login|netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-
ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|
systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>]
The TCP/UDP destination port range end.
[icmptype [!]= <{echo-reply|destination-unreachable|source-quench|redirect|
echo-request|router-advertisement|router-solicitation|time-
exceeded|parameter-problems|timestamp-request|timestamp-
reply|information-request|information-reply|address-mask-
request|address-mask-reply} or number>]
The ICMP type (name or number) of the packet.
[icmpcode [!]= <number{0-15}>]
The ICMP code or range begin.
[icmpcodeend = <number{0-15}>]
The ICMP code range end. (inclusive)
iplengthmin [!]= <number>
The minimum IP length in bytes (header inclusive).
[iplengthmax = <number>]
The maximum IP length including header in bytes (header inclusive).
[mask = <{(HIDDEN)}>]
(HIDDEN)
[bridgeport = <{(HIDDEN)}>]
(HIDDEN)
expr delete
Delete an expression.
Syntax : delete name = <{wan|lan|local|tunnel|dmz|guest|voice_if|
contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253|
ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|SMB|
imap|imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|ssh|dns|
nntp|ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp|
ssdp_serv|mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP-Inc-
SIP-TCP|VoIP-Inc-RTP}>
[index = <number>]

Parameters :
[name = <{_intf_0|wan|lan|_intf_1|_intf_2|DHCP-R_if_0|local|tunnel|dmz|
guest|voice_if|DNS-S_if_0|MDAP_if_0|PPTPD_if_0|PPTPGRE_if_0|
HTTP_if_0|HTTPs_if_0|FTP_if_0|TELNET_if_0|DHCP-S_if_0|SSDP_if_0|
PING_RESPONDER_if_0|UPnP-HTTP_if_0|_addr_127_0_0_1|
contentsharing_ip|_addr_10_0_0_138|_addr_192_168_1_254|private|
ssdp_ip|mdap_ip|192.168.1.253|_addr_130_43_75_179|ftp|DHCP-R_sv_0|
icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|SMB|imap|imap3|imap4-
ssl|imaps|pop2|pop3|pop3s|smtp|ssh|dns|nntp|ipsec|esp|ah|ike|
DiffServ|sip|h323|dhcp|rtsp|ssdp_serv|mdap_serv|syslog|VoIP-Inc-SIP-
UDP|VoIP-Inc-SIP-TCP|VoIP-Inc-RTP|DNS-S_sv_0|MDAP_sv_0|PPTPD_sv_0|
PPTPGRE_sv_0|HTTP_sv_0|HTTPs_sv_0|FTP_sv_0|TELNET_sv_0|DHCP-S_sv_0|
SSDP_sv_0|PING_RESPONDER_sv_0|UPnP-HTTP_sv_0}>]
The name of an expression to list.
[type = <{intf|ip|serv|mac|length}>]
The type of an expression.
[format = <{pretty|cli}>]
The format of the expression list.
[dynamic = <{(HIDDEN)}>]
(HIDDEN)
expr modify
Modify an expression.
Syntax : modify name = <{wan|lan|local|tunnel|dmz|guest|voice_if|
contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253|
ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|SMB|
imap|imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|ssh|dns|
nntp|ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp|
ssdp_serv|mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP-Inc-
SIP-TCP|VoIP-Inc-RTP}>
[type = <{intf|ip|serv|mac|length}>] index = <number>
mac [!]= <hardware-address> addr [!]= <ip-range>
[mask [ <ip-mask(dotted or cidr)>]
[intf [!]= <{loop|Internet|LocalNetwork}>]
[intfgroup [!]= <{wan|local|lan|tunnel|dmz|guest} or number>]
[tos [!]= <number{0-255}>]
[precedence [!]= <{routine|priority|immediate|flash|flash-
override|CRITIC-ECP|internetwork-control|
network-control} or number>]
[dscp [!]= <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|
af41|af42|af43|cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or
number>]
[proto [!]= <{icmp|igmp|ipinip|tcp|udp|ah|esp|ipcomp} or
number>]
[srcport [!]= <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|
bgp|biff|bootpc|bootps|chargen|clearcase|daytime|
discard|dns|domain|doom|echo|exec|finger|ftp|ftp-
data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|
ldap|login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|
sunrpc|syslog|systat|talk|telnet|time|timed|tftp|
ulistserv|utime|uucp|uucp-rlogin|who|www-http|
whoami|xwindows} or number>]
[srcportend = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|
bgp|biff|bootpc|bootps|chargen|clearcase|daytime|
discard|dns|domain|doom|echo|exec|finger|ftp|ftp-
data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|
ldap|login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|
sunrpc|syslog|systat|talk|telnet|time|timed|tftp|
ulistserv|utime|uucp|uucp-rlogin|who|www-http|
whoami|xwindows} or number>]
[dstport [!]= <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|
bgp|biff|bootpc|bootps|chargen|clearcase|daytime|
discard|dns|domain|doom|echo|exec|finger|ftp|ftp-
data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|
ldap|login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|
sunrpc|syslog|systat|talk|telnet|time|timed|tftp|
ulistserv|utime|uucp|uucp-rlogin|who|www-http|
whoami|xwindows} or number>]
[dstportend = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|
bgp|biff|bootpc|bootps|chargen|clearcase|daytime|
discard|dns|domain|doom|echo|exec|finger|ftp|ftp-
data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|
ldap|login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|
sunrpc|syslog|systat|talk|telnet|time|timed|tftp|
ulistserv|utime|uucp|uucp-rlogin|who|www-http|
whoami|xwindows} or number>]
[icmptype [!]= <{echo-reply|destination-unreachable|source-
quench|redirect|echo-request|router-
advertisement|router-solicitation|time-exceeded|
parameter-problems|timestamp-request|timestamp-
reply|information-request|information-reply|
address-mask-request|address-mask-reply} or
number>]
[icmpcode [!]= <number{0-15}>] [icmpcodeend = <number{0-15}>]
iplengthmin [!]= <number> [iplengthmax = <number>]

Parameters :
name = <{wan|lan|local|tunnel|dmz|guest|voice_if|contentsharing_ip|private|
ssdp_ip|mdap_ip|192.168.1.253|ftp|icmp|igmp|telnet|http|httpproxy|
https|RPC|NBT|SMB|imap|imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|
ssh|dns|nntp|ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv|
mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP-Inc-SIP-TCP|VoIP-Inc-RTP}>
The name of an expression to modify.
[type = <{intf|ip|serv|mac|length}>]
The type of an expression.
index = <number>
The index of a subexpression.
mac [!]= <hardware-address>
The MAC address.
addr [!]= <ip-range>
The IP address or range.
[mask [ <ip-mask(dotted or cidr)>]
The IP mask (ignored if an IP range is provided).
[intf [!]= <{loop|Internet|LocalNetwork}>]
The IP interface name.
[intfgroup [!]= <{wan|local|lan|tunnel|dmz|guest} or number>]
The IP interface group.
[tos [!]= <number{0-255}>]
The Type Of Service specification in the IP packet.
[precedence [!]= <{routine|priority|immediate|flash|flash-override|CRITIC-
ECP|internetwork-control|network-control} or number>]
The precedence in the IP packet (part of tos).
[dscp [!]= <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41|af42|af43|
cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>]
The diffserv code point in the IP packet (part of tos).
[proto [!]= <{icmp|igmp|ipinip|tcp|udp|ah|esp|ipcomp} or number>]
The IP protocol (name or number) in the IP packet.
[srcport [!]= <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain|
doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|
ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|
ldap|login|netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-
ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|
systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>]
The TCP/UDP source port number or range begin.
[srcportend = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain|
doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|
ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|
ldap|login|netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-
ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|
systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>]
The source TCP/UDP source port range end. (inclusive)
[dstport [!]= <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain|
doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|
ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|
ldap|login|netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-
ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|
systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>]
The TCP/UDP destination port number or range begin.
[dstportend = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain|
doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|
ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|
ldap|login|netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-
ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|
systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>]
The TCP/UDP destination port range end.
[icmptype [!]= <{echo-reply|destination-unreachable|source-quench|redirect|
echo-request|router-advertisement|router-solicitation|time-
exceeded|parameter-problems|timestamp-request|timestamp-
reply|information-request|information-reply|address-mask-
request|address-mask-reply} or number>]
The ICMP type (name or number) of the packet.
[icmpcode [!]= <number{0-15}>]
The ICMP code or range begin.
[icmpcodeend = <number{0-15}>]
The ICMP code range end. (inclusive)
iplengthmin [!]= <number>
The minimum IP length in bytes (header inclusive).
[iplengthmax = <number>]
The maximum IP length including header in bytes (header inclusive).
[mask = <{(HIDDEN)}>]
(HIDDEN)
[bridgeport = <{(HIDDEN)}>]
(HIDDEN)
firewall
Following commands are available :

config : Display/Modify firewall configuration.

clear : Clear firewall configuration.
list : Display firewall configuration.

Following command groups are available :

chain debug level rule

firewall chain
Following commands are available :

add : Add a chain.

delete : Delete a chain.
list : Display a list of chains.
flush : Flush all chains.
firewall chain add
Add a chain.
Syntax : add chain = <string>

Parameters :
chain = <string>
The name of the chain to add.
[policy = <{(HIDDEN)}>]
(HIDDEN)
firewall chain delete
Delete a chain.
Syntax : delete chain = <chain name>

Parameters :
chain = <chain name>
The name of the chain to delete.
firewall chain flush
Flush all chains.
Syntax : flush
firewall chain list
Display a list of chains.
Syntax : list [format = <{pretty|cli}>]

Parameters :
[format = <{pretty|cli}>]
The format of the chain list.
[HIDDEN]firewall chain modify
Modify a chain.
Syntax : modify chain = <chain name>

Parameters :
chain = <chain name>
The name of the chain to modify.
[policy = <{(HIDDEN)}>]
(HIDDEN)
firewall clear
Clear firewall configuration.
Syntax : clear
firewall config
Display/Modify firewall configuration.
Syntax : config [state = <{disabled|enabled}>] [keep = <{disabled|enabled}>]
[tcpchecks = <{none|fast|exact}>]
[udpchecks = <{disabled|enabled}>]
[icmpchecks = <{disabled|enabled}>]
[logdefault = <{disabled|enabled}>]
[logthreshold = <{disabled|enabled}>]
[tcpwindow = <number{0-1073725440}>]

Parameters :
[state = <{disabled|enabled}>]
Disable/Enable the firewall.
[keep = <{disabled|enabled}>]
Disable/Enable keeping existing connections when firewall rules change.
[tcpchecks = <{none|fast|exact}>]
Select level of TCP checks.
[udpchecks = <{disabled|enabled}>]
Disable/Enable UDP checks.
[icmpchecks = <{disabled|enabled}>]
Disable/Enable ICMP checks.
[logdefault = <{disabled|enabled}>]
Disable/Enable logging of default firewall rule.
[logthreshold = <{disabled|enabled}>]
Disable/Enable log thresholding.
[tcpwindow = <number{0-1073725440}>]
Modify the tcpwindow for fast TCP checks
[test = <{(HIDDEN)}>]
(HIDDEN)
firewall debug
Following commands are available :

traceconfig : Display/Modify firewall trace configuration.

stats : Display firewall statistics.
clear : Clear firewall statistics.
firewall debug clear
Clear firewall statistics.
Syntax : clear
firewall debug stats
Display firewall statistics.
Syntax : stats
firewall debug traceconfig
Display/Modify firewall trace configuration.
Syntax : traceconfig [tcpchecks = <{disabled|enabled}>]
[udpchecks = <{disabled|enabled}>]
[icmpchecks = <{disabled|enabled}>]
[sink = <{none|all|accept|deny|drop|reset} or number>]
[forward = <{none|all|accept|deny|drop|reset} or number>]

[source = <{none|all|accept|deny|drop|reset} or number>]

Parameters :
[tcpchecks = <{disabled|enabled}>]
Disable/Enable tcpchecks traces.
[udpchecks = <{disabled|enabled}>]
Disable/Enable udpchecks traces.
[icmpchecks = <{disabled|enabled}>]
Disable/Enable icmpchecks traces.
[sink = <{none|all|accept|deny|drop|reset} or number>]
The action the firewall traces for sink traffic.
[forward = <{none|all|accept|deny|drop|reset} or number>]
The action the firewall traces for forward traffic.
[source = <{none|all|accept|deny|drop|reset} or number>]
The action the firewall traces for source traffic.
firewall level
Following commands are available :

add : Add a new security level.

delete : Delete a security level.
modify : Modify a security level.
list : List all security levels.
set : Set/Display active security level.
flush : Flush security level configuration.
firewall level add
Add a new security level.
Syntax : add name = <string> [index = <number>]
[readonly = <{disabled|enabled}>]
[udptrackmode = <{strict|loose}>]
[service = <{disabled|enabled}>] [proxy = <{disabled|enabled}>]
[text = <quoted string>]
[policy = <{default|drop|accept|strict|loose}>]

Parameters :
name = <string>
The name of the security level to add.
[index = <number>]
The index of the security level.
[readonly = <{disabled|enabled}>]
Select whether the security level is readonly.
[udptrackmode = <{strict|loose}>]
Select UDP connection tracking mode.
[service = <{disabled|enabled}>]
Enable/Disable host service definitions for this security level.
[proxy = <{disabled|enabled}>]
Enable/Disable proxy system services for this security level.
[text = <quoted string>]
The description of this security level.
[policy = <{default|drop|accept|strict|loose}>]
Select default policy of this security level.
firewall level delete
Delete a security level.
Syntax : delete name = <security level name>

Parameters :
name = <security level name>
The name of the security level to delete.
firewall level flush
Flush security level configuration.
Syntax : flush
firewall level list
List all security levels.
Syntax : list [format = <{pretty|cli}>]

Parameters :
[format = <{pretty|cli}>]
The format of the security level list.
firewall level modify
Modify a security level.
Syntax : modify name = <security level name> [index = <number>]
[readonly = <{disabled|enabled}>]
[udptrackmode = <{strict|loose}>]
[service = <{disabled|enabled}>]
[proxy = <{disabled|enabled}>] [text = <quoted string>]
[policy = <{default|drop|accept|strict|loose}>]

Parameters :
name = <security level name>
The name of the security level to modify.
[index = <number>]
The index of this security level.
[readonly = <{disabled|enabled}>]
Select whether the security level is readonly.
[udptrackmode = <{strict|loose}>]
Select UDP connection tracking mode.
[service = <{disabled|enabled}>]
Enable/Disable service definitions for this security level.
[proxy = <{disabled|enabled}>]
Enable/Disable proxy system services for this security level.
[text = <quoted string>]
The description of this security level.
[policy = <{default|drop|accept|strict|loose}>]
Select default policy of this security level.
firewall level set
Set/Display active security level.
Syntax : set [name = <security level name>]

Parameters :
[name = <security level name>]
The name of the security level to set active.
firewall list
Display firewall configuration.
Syntax : list [format = <{pretty|cli}>]

Parameters :
[format = <{pretty|cli}>]
The format of the firewall list.
firewall rule
Following commands are available :

add : Add a rule.

delete : Delete a rule.
modify : Modify a rule.
list : Display a list of rules.
flush : Flush all rules.

Following command groups are available :

debug
firewall rule add
Add a rule.
Syntax : add chain = <chain name> [index = <number>] [name = <string>]
[clink = <chain name>]
[srcintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>]
[srcip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|
192.168.1.253}>]
[dstintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>]
[dstip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|
192.168.1.253}>]
[serv [!]= <{ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|
SMB|imap|imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|
ssh|dns|nntp|ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp|
rtsp|ssdp_serv|mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP-
Inc-SIP-TCP|VoIP-Inc-RTP}>]
[length [!]= <{}>] [log = <{disabled|enabled}>]
[state = <{disabled|enabled}>]
action = <{accept|deny|drop|reset|count|link}>

Parameters :
chain = <chain name>
The name of the chain which contains the rule.
[index = <number>]
The index of the rule in the chain.
[name = <string>]
The name of the new rule.
[clink = <chain name>]
The name of the chain to be parsed when this rule applies.
[srcintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>]
The name of the source interface expression.
[srcip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253}>]
The name of the source ip expression.
[dstintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>]
The name of the destination interface expression.
[dstip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253}>]
The name of the destination ip expression.
[serv [!]= <{ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|SMB|imap|
imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|ssh|dns|nntp|ipsec|
esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv|mdap_serv|
syslog|VoIP-Inc-SIP-UDP|VoIP-Inc-SIP-TCP|VoIP-Inc-RTP}>]
The name of the service expression.
[length [!]= <{}>]
The name of the length expression.
[log = <{disabled|enabled}>]
Disable/Enable logging when this rule applies.
[state = <{disabled|enabled}>]
Disable/Enable this rule.
action = <{accept|deny|drop|reset|count|link}>
The action to be taken when this rule applies ('link' when clink is
used).
[newindex = <{(HIDDEN)}>]
(HIDDEN)
[srcmac = <{(HIDDEN)}>]
(HIDDEN)
[connstate = <{(HIDDEN)}>]
(HIDDEN)
firewall rule debug
Following commands are available :

traceconfig : Display/Modify rule trace configuration.

stats : Display rule statistics.
clear : Clear rule statistics.
firewall rule debug clear
Clear rule statistics.
Syntax : clear [chain = <chain name>] [index = <number>]

Parameters :
[chain = <chain name>]
The name of the chain.
[index = <number>]
The index of the rule in the chain.
firewall rule debug stats
Display rule statistics.
Syntax : stats [chain = <chain name>] [index = <number>]

Parameters :
[chain = <chain name>]
The name of the chain.
[index = <number>]
The index of the rule in the chain.
firewall rule debug traceconfig
Display/Modify rule trace configuration.
Syntax : traceconfig [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Disable/Enable rule traces.
firewall rule delete
Delete a rule.
Syntax : delete chain = <chain name> index = <number>

Parameters :
chain = <chain name>
The name of the chain in which to delete the rule.
index = <number>
The number of the rule in the chain.
firewall rule flush
Flush all rules.
Syntax : flush [chain = <chain name>]

Parameters :
[chain = <chain name>]
The name of the chain to flush.
firewall rule list
Display a list of rules.
Syntax : list [chain = <chain name>] [format = <{pretty|cli}>]

Parameters :
[chain = <chain name>]
The name of the chain to list the rules of.
[format = <{pretty|cli}>]
The format of the rule list.
firewall rule modify
Modify a rule.
Syntax : modify chain = <chain name> [index = <number>] [newindex = <number>]
[name = <string>] [clink = <chain name>] [[!]srcintf]
[[!]srcip] [[!]dstintf] [[!]dstip] [[!]serv] [[!]length]
[log = <{disabled|enabled}>] [state = <{disabled|enabled}>]
[action = <{accept|deny|drop|reset|count|link}>]

Parameters :
chain = <chain name>
The name of the chain which contains the rule.
[index = <number>]
The index of the rule in the chain.
[newindex = <number>]
The new index of the rule in the chain.
[name = <string>]
The name of the new rule.
[clink = <chain name>]
The name of the chain to be parsed when this rule applies.
[[!]srcintf]
The name of the source interface expression.
[[!]srcip]
The name of the source ip expression.
[[!]dstintf]
The name of the destination interface expression.
[[!]dstip]
The name of the destination ip expression.
[[!]serv]
The name of the service expression.
[[!]length]
The name of the length expression.
[log = <{disabled|enabled}>]
Disable/Enable logging when this rule applies.
[state = <{disabled|enabled}>]
Disable/Enable this rule.
[action = <{accept|deny|drop|reset|count|link}>]
The action to be taken when this rule applies ('link' when clink is
used).
[srcmac = <{(HIDDEN)}>]
(HIDDEN)
[connstate = <{(HIDDEN)}>]
(HIDDEN)
grp
Following commands are available :

rtlist : Show the current routes in the grp routing table.

config : Set the grp configuration settings.
flush : Flush grp interface settings and parameters.

Following command groups are available :

rip
grp config
Set the grp configuration settings.
Syntax : config [cdistance = <number{0-255}>] [kdistance = <number{0-255}>]
[rdistance = <number{0-255}>] [trace = <{disabled|enabled}>]

Parameters :
[cdistance = <number{0-255}>]
Set the distance of the connected route type. Default distance is 0.
[kdistance = <number{0-255}>]
Set the distance of the kernel route type. Default distance is 1.
[rdistance = <number{0-255}>]
Set the distance of the RIP route type. Default distance is 120.
[trace = <{disabled|enabled}>]
Enable/Disable tracing.
grp flush
Flush grp interface settings and parameters.
Syntax : flush
grp rip
Following commands are available :

ifconfig : Configure a RIP interface.

config : Set the RIP configuration settings.
show : Show the RIP settings and the routes in the RIP database.
flush : Flush RIP interface settings and global parameters.
grp rip config
Set the RIP configuration settings.
Syntax : config state = <{disabled|enabled}>
[version = <{rip_unspec|rip_v1|rip_v2}>]
[updatetime = <number{1-3600}>]

Parameters :
state = <{disabled|enabled}>
Enable/Disable the RIP daemon.
[version = <{rip_unspec|rip_v1|rip_v2}>]
Set the RIP version.
[updatetime = <number{1-3600}>]
Set the routing table update timer value. Default is 30 seconds.
grp rip flush
Flush RIP interface settings and global parameters.
Syntax : flush
grp rip ifconfig
Configure a RIP interface.
Syntax : ifconfig intf = <{LocalNetwork|Internet}>
[rip = <{disabled|enabled}>]
[rxversion = <{rip_unspec|rip_v1|rip_v2|rip_v1-2}>]
[authmode = <{none|cleartext}>] [authstr = <password>]
[splithorizon = <{disabled|enabled}>]

Parameters :
intf = <{LocalNetwork|Internet}>
The name of the RIP interface to configure.
[rip = <{disabled|enabled}>]
Enable/Disable the RIP status.
[rxversion = <{rip_unspec|rip_v1|rip_v2|rip_v1-2}>]
Set the RIP receive version.
[authmode = <{none|cleartext}>]
Set the RIP authentication mode.
[authstr = <password>]
Set the RIP authentication password.
[splithorizon = <{disabled|enabled}>]
Enable/Disable the split horizon status.
grp rip show
Show the RIP settings and the routes in the RIP database.
Syntax : show
grp rtlist
Show the current routes in the grp routing table.
Syntax : rtlist [dst = <ip-address>] [dstmsk = <ip-mask(dotted or cidr)>]

Parameters :
[dst = <ip-address>]
The destination IP address using this route. Supports ip/mask notation.
[dstmsk = <ip-mask(dotted or cidr)>]
The destination IP address mask.
hostmgr
Following commands are available :

clear : Remove all host devices

flush : Flush Device Discovery configuration (i.e. clear & to
defaults)
config : Configure Device Discovery deamon
add : Add host device
update : Update host device parameters
delete : Delete host device
list : List all host devices
hostmgr add
Add host device
Syntax : add mac_addr = <hardware-address>
[host_type = <{Generic|Desktop|Laptop|STB|PDA|GS|Phone|GSM|
Printer|MassStorage|None}>]
[host_name = <string>] [user_friendly_name = <quoted string>]
[dns_name = <string>]
[type = <{Unknown|L2-FXS|L2-USB|L2-BT|L3-IP|L7-UPNP|L2-PPPOERELAY|
L2-WLAN}>]
[interface = <string>] [ip_intf = <string>]

Parameters :
mac_addr = <hardware-address>
Host MAC address
[host_type = <{Generic|Desktop|Laptop|STB|PDA|GS|Phone|GSM|Printer|
MassStorage|None}>]
Host type
[host_name = <string>]
Host name
[user_friendly_name = <quoted string>]
Host user friendly name
[dns_name = <string>]
Host DNS name
[type = <{Unknown|L2-FXS|L2-USB|L2-BT|L3-IP|L7-UPNP|L2-PPPOERELAY|L2-
WLAN}>]
Host connection type
[interface = <string>]
Host Ethernet interface XREF
[ip_intf = <string>]
Host IP interface XREF
[user_set = <{(HIDDEN)}>]
(HIDDEN)
hostmgr clear
Remove all host devices
Syntax : clear
hostmgr config
Configure Device Discovery deamon
Syntax : config [state = <{disabled|enabled}>] [trace = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/disable Device Discovery deamon
[trace = <{disabled|enabled}>]
Enable/disable Device Discovery traces
[scantime = <{(HIDDEN)}>]
(HIDDEN)
[autosave = <{(HIDDEN)}>]
(HIDDEN)
hostmgr delete
Delete host device
Syntax : delete mac_addr = <hardware-address>
[type = <{Unknown|L2-FXS|L2-USB|L2-BT|L3-IP|L7-UPNP|L2-
PPPOERELAY|L2-WLAN}>]
[index = <number>]

Parameters :
mac_addr = <hardware-address>
Host MAC address
[type = <{Unknown|L2-FXS|L2-USB|L2-BT|L3-IP|L7-UPNP|L2-PPPOERELAY|L2-
WLAN}>]
Host connection type
[index = <number>]
Host index
hostmgr flush
Flush Device Discovery configuration (i.e. clear & to defaults)
Syntax : flush
hostmgr list
List all host devices
Syntax : list [expand = <{disabled|enabled}>]

Parameters :
[expand = <{disabled|enabled}>]
Expanded listing.
hostmgr update
Update host device parameters
Syntax : update mac_addr = <hardware-address>
[host_type = <{Generic|Desktop|Laptop|STB|PDA|GS|Phone|GSM|
Printer|MassStorage|None}>]
[host_name = <string>] [user_friendly_name = <quoted string>]
[dns_name = <string>]
[type = <{Unknown|L2-FXS|L2-USB|L2-BT|L3-IP|L7-UPNP|L2-
PPPOERELAY|L2-WLAN}>]
[interface = <string>] [ip_intf = <string>]

config : Display/Modify IDS configuration.

clear : Clear IDS statistics.

Following command groups are available :

parser pattern signature threshold

ids clear
Clear IDS statistics.
Syntax : clear
ids config
Display/Modify IDS configuration.
Syntax : config [state = <{disabled|enabled}>] [trace = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable ids checks.
[trace = <{disabled|enabled}>]
Enable/Disable ids traces.
[HIDDEN]ids conntrack
Following commands are available :

list : Display connections in connection tracker.

stats : Display connection tracker statistics.
clear : Reset connection tracker.
ids conntrack clear
Reset connection tracker.
Syntax : clear
ids conntrack list
Display connections in connection tracker.
Syntax : list [size = <{10|100|full} or number>]

Parameters :
[size = <{10|100|full} or number>]
Modify the size of connection tracker list.
ids conntrack stats
Display connection tracker statistics.
Syntax : stats
ids parser
Following commands are available :

list : Display ids parser configuration.

modify : Modify ids parser configuration.
ids parser list
Display ids parser configuration.
Syntax : list [parser = <parser>]

Parameters :
[parser = <parser>]
The name of the parser.
ids parser modify
Modify ids parser configuration.
Syntax : modify [parser = <parser>] state = <{disabled|enabled}>

Parameters :
[parser = <parser>]
The name of the parser.
state = <{disabled|enabled}>
The state of the parser.
ids pattern
Following commands are available :

list : Display patterns in pattern tracker.

stats : Display pattern tracker statistics.
clear : Reset pattern tracker.
ids pattern clear
Reset pattern tracker.
Syntax : clear
ids pattern list
Display patterns in pattern tracker.
Syntax : list [size = <{10|100|full} or number>]

Parameters :
[size = <{10|100|full} or number>]
Modify the size of pattern tracker list.
ids pattern stats
Display pattern tracker statistics.
Syntax : stats
ids signature
Following commands are available :

list : Display ids signature configuration.

modify : Modify ids signature configuration.
ids signature list
Display ids signature configuration.
Syntax : list [signature = <fragment_sweep|zero-length_fragment_size|
small_fragment_size|fragment_size_overrun|
fragment_overlap|fragment_out-of-order|
ip_protocol_scan|tcp_port_scan|tcp_syn_scan|
stealth_tcp_null_scan|stealth_tcp_fin_scan|
stealth_tcp_xmas_scan|stealth_tcp_full_xmas_scan|
stealth_tcp_vecna_scan|stealth_tcp_syn-fin_scan|
udp_port_scan|ping_sweep_scan|tcp_syn_flood|
udp_flood|ping_flood|icmp_unreachable_storm|
smurf_broadcast_attack|smurf_storm_attack|
fraggle_broadcast_attack|fraggle_storm_attack|
land_attack|spoofed_packet|tcp_null_port|
tcp_data_on_syn_segment|tcp_invalid_urgent_offset|
udp_null_port|icmp_type_unknown|icmp_code_unknown|
ip_zero_payload|tcp_rate_limiting|udp_rate_limiting|
icmp_rate_limiting|ip_rate_limiting}>]

Parameters :
[signature = <fragment_sweep|zero-length_fragment_size|small_fragment_size|
fragment_size_overrun|fragment_overlap|fragment_out-of-order|
ip_protocol_scan|tcp_port_scan|tcp_syn_scan|
stealth_tcp_null_scan|stealth_tcp_fin_scan|
stealth_tcp_xmas_scan|stealth_tcp_full_xmas_scan|
stealth_tcp_vecna_scan|stealth_tcp_syn-fin_scan|udp_port_scan|
ping_sweep_scan|tcp_syn_flood|udp_flood|ping_flood|
icmp_unreachable_storm|smurf_broadcast_attack|
smurf_storm_attack|fraggle_broadcast_attack|
fraggle_storm_attack|land_attack|spoofed_packet|tcp_null_port|
tcp_data_on_syn_segment|tcp_invalid_urgent_offset|
udp_null_port|icmp_type_unknown|icmp_code_unknown|
ip_zero_payload|tcp_rate_limiting|udp_rate_limiting|
icmp_rate_limiting|ip_rate_limiting}>]
The name of the signature.
ids signature modify
Modify ids signature configuration.
Syntax : modify [signature = <fragment_sweep|zero-length_fragment_size|
small_fragment_size|fragment_size_overrun|
fragment_overlap|fragment_out-of-order|
ip_protocol_scan|tcp_port_scan|tcp_syn_scan|
stealth_tcp_null_scan|stealth_tcp_fin_scan|
stealth_tcp_xmas_scan|stealth_tcp_full_xmas_scan|
stealth_tcp_vecna_scan|stealth_tcp_syn-fin_scan|
udp_port_scan|ping_sweep_scan|tcp_syn_flood|
udp_flood|ping_flood|icmp_unreachable_storm|
smurf_broadcast_attack|smurf_storm_attack|
fraggle_broadcast_attack|fraggle_storm_attack|
land_attack|spoofed_packet|tcp_null_port|
tcp_data_on_syn_segment|tcp_invalid_urgent_offset|
udp_null_port|icmp_type_unknown|icmp_code_unknown|
ip_zero_payload|tcp_rate_limiting|
udp_rate_limiting|icmp_rate_limiting|
ip_rate_limiting}>]
state = <{disabled|enabled}>

list : Display IDS thresholds.

modify : Modify IDS threshold.
clear : Reset IDS thresholds.
ids threshold clear
Reset IDS thresholds.
Syntax : clear
ids threshold list
Display IDS thresholds.
Syntax : list
ids threshold modify
Modify IDS threshold.
Syntax : modify index = <number> [window = <number>] [limit = <number>]
[scaling = <{disabled|enabled}>]

Parameters :
index = <number>
The index of the threshold.
[window = <number>]
The time window of the threshold.
[limit = <number>]
The limit of the threshold.
[scaling = <{disabled|enabled}>]
Scaling of the threshold window.
igmp
Following command groups are available :

host proxy
igmp host
Following commands are available :

config : Display/Modify global IGMP configuration.

ifconfig : Configure an IGMP interface.
iflist : Show the configuration of the IGMP interfaces.
list : Show the IGMP groups.
flush : Flush the IGMP settings.

Following command groups are available :

debug
igmp host config
Display/Modify global IGMP configuration.
Syntax : config [requirera = <{disabled|enabled}>]

Parameters :
[requirera = <{disabled|enabled}>]
Enable/Disable the router alert IP option check.
igmp host debug
Following commands are available :

stats : Print IGMP statistics.

clear : Clear IGMP statistics.
igmp host debug clear
Clear IGMP statistics.
Syntax : clear
igmp host debug stats
Print IGMP statistics.
Syntax : stats
igmp host flush
Flush the IGMP settings.
Syntax : flush
igmp host ifconfig
Configure an IGMP interface.
Syntax : ifconfig intf = <{loop|Internet|LocalNetwork}>
version = <{none|IGMPv1|IGMPv2|IGMPv3}>

Parameters :
intf = <{loop|Internet|LocalNetwork}>
The IP interface name.
version = <{none|IGMPv1|IGMPv2|IGMPv3}>
The IGMP version of the IP interface.
igmp host iflist
Show the configuration of the IGMP interfaces.
Syntax : iflist [expand = <{disabled|enabled}>]

Parameters :
[expand = <{disabled|enabled}>]
Expanded listing.
igmp host list
Show the IGMP groups.
Syntax : list [intf = <{loop|Internet|LocalNetwork}>]
[expand = <{disabled|enabled}>]

Parameters :
[intf = <{loop|Internet|LocalNetwork}>]
The IP interface name.
[expand = <{disabled|enabled}>]
Expanded listing.
igmp proxy
Following commands are available :

config : Configure the IGMP proxy.

ifconfig : Configure an IGMP proxy interface.
iflist : Show the configuration of an IGMP proxy interface.
grouplist : Show the learned groups on an IGMP proxy interface.
mbslist : Show the IGMP proxy membership database (merge of all
learned groups).
flush : Flush all IGMP proxy settings and learned groups

Following command groups are available :

debug
igmp proxy config
Configure the IGMP proxy.
Syntax : config [state = <{disabled|enabled}>] [qi = <number{1-31744}>]
[qri = <number{1-3175}>] [lmqi = <number{1-3175}>]
[rv = <number{2-7}>] [advinter = <number{4-180}>]
[initadvinter = <number{1-4}>]
[initadvcount = <number{1-10}>]
[requirera = <{disabled|enabled}>]
[localgroup = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable the IGMP proxy.
[qi = <number{1-31744}>]
The interval in seconds between general queries sent by the querier.
[qri = <number{1-3175}>]
The maximum response time in seconds for an IGMP client in reply to
general queries.
[lmqi = <number{1-3175}>]
The maximum response time in seconds for an IGMP client in reply to group
specific queries.
[rv = <number{2-7}>]
The robustness variable allows tuning for expected IGMP packet loss.
[advinter = <number{4-180}>]
The interval in seconds for unsolicited MRD advertisements (see rfc4286).
[initadvinter = <number{1-4}>]
The interval in seconds for initial unsolicited MRD advertisements (see
rfc4286).
[initadvcount = <number{1-10}>]
The maximum number of initial unsolicited MRD advertisements (see
rfc4286).
[requirera = <{disabled|enabled}>]
Enable/Disable the router alert IP option check.
[localgroup = <{disabled|enabled}>]
Enable/Disable the processing of a local multicast group in an IGMP
packet.
igmp proxy debug
Following commands are available :

traceconfig : Modify IGMP proxy trace configuration

stats : Print IGMP proxy statistics
clear : Clear IGMP proxy statistics
igmp proxy debug clear
Clear IGMP proxy statistics
Syntax : clear
igmp proxy debug stats
Print IGMP proxy statistics
Syntax : stats
igmp proxy debug traceconfig
Modify IGMP proxy trace configuration
Syntax : traceconfig [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable tracing.
igmp proxy flush
Flush all IGMP proxy settings and learned groups
Syntax : flush
igmp proxy grouplist
Show the learned groups on an IGMP proxy interface.
Syntax : grouplist [intf = <{LocalNetwork|Internet}>]
[expand = <{disabled|enabled}>]

Parameters :
[intf = <{LocalNetwork|Internet}>]
The name of the IGMP proxy interface to be listed.
[expand = <{disabled|enabled}>]
Expanded listing.
igmp proxy ifconfig
Configure an IGMP proxy interface.
Syntax : ifconfig intf = <{LocalNetwork|Internet}>
[state = <{inactive|downstream|upstream}>]
[version = <{IGMPv1|IGMPv2|IGMPv3}>]
[fastleave = <{disabled|enabled}>]
[exptrack = <{disabled|enabled}>]
[mrd = <{disabled|enabled}>]
[spoofing = <{disabled|enabled}>]

Parameters :
intf = <{LocalNetwork|Internet}>
The name of the IGMP proxy interface to be configured.
[state = <{inactive|downstream|upstream}>]
The state of the IGMP proxy interface.
[version = <{IGMPv1|IGMPv2|IGMPv3}>]
The IGMP version of the IGMP proxy interface.
[fastleave = <{disabled|enabled}>]
Enable/Disable the immediate deletion of a group when a leave is
received.
[exptrack = <{disabled|enabled}>]
Enable/Disable explicit host tracking.
[mrd = <{disabled|enabled}>]
Enable/Disable sending multicast router advertisements (rfc 4286).
[spoofing = <{disabled|enabled}>]
Enable/Disable spoofing of IGMP packets on upstream interfaces.
igmp proxy iflist
Show the configuration of an IGMP proxy interface.
Syntax : iflist [expand = <{disabled|enabled}>]

Parameters :
[expand = <{disabled|enabled}>]
Expanded listing.
igmp proxy mbslist
Show the IGMP proxy membership database (merge of all learned groups).
Syntax : mbslist
interface
Following commands are available :

list : Display interfaces.

interface list
Display interfaces.
Syntax : list [expand = <{disabled|enabled}>]
[reverse = <{disabled|enabled}>]

Parameters :
[expand = <{disabled|enabled}>]
Expanded listing.
[reverse = <{disabled|enabled}>]
Reverse listing (lower layer iso. upper layer).
ip
Following commands are available :

ifadd : Create an IP interface.

ifdelete : Delete an IP interface.
ifattach : Attach an IP interface.
ifdetach : Detach an IP interface.
ifconfig : Modify an IP interface configuration.
iflist : Display all IP interfaces.
ifwait : Wait for a status change of an IP interface.
ipadd : Assign an IP address to an IP interface.
ipdelete : Remove an IP address from an IP interface.
ipconfig : Modify an IP address configuration.
iplist : Display all configured IP addresses.
rtadd : Add a route to the routing table.
rtconfig : Modify a route of the routing table.
rtdelete : Delete a route from the routing table.
rtlist : Display the routing table.
arpadd : Add an entry to the ARP cache of a broadcast IP interface.
arpdelete : Delete an ARP entry.
arplist : Display the ARP cache.
config : Display/Modify global IP stack configuration.
flush : Flush all static IP parameters. Dynamic info (e.g. from
PPP links) remains.

Following command groups are available :

aip auto debug mcast

ip aip
Following commands are available :

config : Display/Modify AIP configuration.

list : Display AIP session list.
stats : Display AIP session/intf statistics
ip aip config
Display/Modify AIP configuration.
Syntax : config [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/disable IP acceleration.
ip aip list
Display AIP session list.
Syntax : list
ip aip stats
Display AIP session/intf statistics
Syntax : stats
ip arpadd
Add an entry to the ARP cache of a broadcast IP interface.
Syntax : arpadd intf = <{LocalNetwork}> ip = <ip-range>
[hwaddr = <hardware-address>]

Parameters :
intf = <{LocalNetwork}>
The IP interface name.
ip = <ip-range>
The IP address [range] of the entry to add.
[hwaddr = <hardware-address>]
The hardware address (e.g. Ethernet MAC address) of the entry to add.
ip arpdelete
Delete an ARP entry.
Syntax : arpdelete intf = <{LocalNetwork}> ip = <ip-range>
[hwaddr = <hardware-address>]

Parameters :
intf = <{LocalNetwork}>
The IP interface name.
ip = <ip-range>
The IP address [range] of the entry to delete.
[hwaddr = <hardware-address>]
The hardware address (e.g. Ethernet MAC address) of the entry to delete.
ip arplist
Display the ARP cache.
Syntax : arplist
ip auto
Following commands are available :

ifadd : Creates a new autoIP interface.

ifdelete : Deletes an existing autoIP interface.
ifattach : Select and assign a link-local address to an autoIP
interface.
ifdetach : Release the link-local address for the given autoIP
interface.
ifconfig : Configures an autoIP interface.
iflist : Shows the autoIP interfaces.
flush : Flushes autoIP interfaces.

Following command groups are available :

debug
ip auto debug
Following commands are available :

traceconfig : Modify autoIP trace configuration

ip auto debug traceconfig
Modify autoIP trace configuration
Syntax : traceconfig [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable verbose logging.
ip auto flush
Flushes autoIP interfaces.
Syntax : flush
ip auto ifadd
Creates a new autoIP interface.
Syntax : ifadd intf = <{LocalNetwork}> [addr = <ip-address>]

Parameters :
intf = <{LocalNetwork}>
The name of the IP interface for which a link-local address has to be
allocated.
[addr = <ip-address>]
The preferred link-local IP address.
ip auto ifattach
Select and assign a link-local address to an autoIP interface.
Syntax : ifattach intf = <>

Parameters :
intf = <>
The name of the autoIP interface.
ip auto ifconfig
Configures an autoIP interface.
Syntax : ifconfig intf = <> [addr = <ip-address>] [poolstart = <ip-address>]
[poolend = <ip-address>]
[netmask = <ip-mask(dotted or cidr)>]
[claim = <number{0-65535}>] [defence = <number{0-65535}>]
[probe = <number{0-65535}>] [interval = <number{1-65535}>]

Parameters :
intf = <>
The name of the autoIP interface to configure.
[addr = <ip-address>]
The preferred link-local IP address.
[poolstart = <ip-address>]
The start IP address of the link-local address pool.
[poolend = <ip-address>]
The end IP address of the link-local address pool.
[netmask = <ip-mask(dotted or cidr)>]
The netmask of the link-local IP address pool.
[claim = <number{0-65535}>]
The number of link-local address selection retries before giving up.
[defence = <number{0-65535}>]
The number of times the link-local address is defended before releasing
the address.
[probe = <number{0-65535}>]
The number of ARP probes to be sent before accepting a link-local
address.
[interval = <number{1-65535}>]
The time interval between two ARP probe transmissions.
ip auto ifdelete
Deletes an existing autoIP interface.
Syntax : ifdelete intf = <>

Parameters :
intf = <>
The name of the autoIP interface.
ip auto ifdetach
Release the link-local address for the given autoIP interface.
Syntax : ifdetach intf = <>

Parameters :
intf = <>
The name of the autoIP interface.
ip auto iflist
Shows the autoIP interfaces.
Syntax : iflist [intf = <>]

Parameters :
[intf = <>]
The name of a autoIP interface.
ip config
Display/Modify global IP stack configuration.
Syntax : config [forwarding = <{disabled|enabled}>]
[redirects = <{disabled|enabled}>]
[checkoptions = <{disabled|enabled|transparent}>]
[netbroadcasts = <{disabled|enabled}>]
[randomdatagramids = <{disabled|enabled}>]
[ttl = <number{0-255}>] [fraglimit = <number{1-1024}>]
[defragmode = <{disabled|enabled}>]
[addrcheck = <{off|own|static|dynamic}>]
[mssclamping = <{disabled|enabled}>]
[natloopback = <{disabled|enabled}>]
[arpcachetimeout = <number{10-7200}>]
[arpclass = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15}>]

Parameters :
[forwarding = <{disabled|enabled}>]
Disable/Enable IP routing functionality.
[redirects = <{disabled|enabled}>]
Disable/Enable sending of ICMP redirect messages.
[checkoptions = <{disabled|enabled|transparent}>]
Disallow/Allow packets with IP options.
[netbroadcasts = <{disabled|enabled}>]
Disallow/Allow net directed broadcasts.
[randomdatagramids = <{disabled|enabled}>]
Disable/Enable random datagram IDs for packets generated locally.
[ttl = <number{0-255}>]
Set the default time-to-live for locally generated IP packets.
[fraglimit = <number{1-1024}>]
Set the maximum number of IP fragments waiting for completion. (Avoids
buffer depletion).
[defragmode = <{disabled|enabled}>]
Disallow/Allow defragmenting IP fragments.
[addrcheck = <{off|own|static|dynamic}>]
Sets the level of ip address checks.
[mssclamping = <{disabled|enabled}>]
Disable/Enable mss clamping for low mtu interfaces.
[natloopback = <{disabled|enabled}>]
Disable/Enable NAT loopback.
[arpcachetimeout = <number{10-7200}>]
Set the global ARP cache timeout.
[arpclass = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15}>]
The prio class of the ARP packets.
[bitrate-window(sec) = <{(HIDDEN)}>]
(HIDDEN)
[acceleration = <{(HIDDEN)}>]
(HIDDEN)
ip debug
Following commands are available :

stats : Display statistics.

traceconfig : Display/Modify IP stack trace configuration.
sendto : Send UDP packets.
httpprobe : Send HTTP probe to measure the round trip time taken to
connect and access data from a HTTP server
ip debug httpprobe
Send HTTP probe to measure the round trip time taken to connect and access
data from a HTTP server
Syntax : httpprobe url = <string> [version = <{1.0|1.1}>]

Parameters :
url = <string>
The Uniform Resource Locator identifying the HTTP server.
[version = <{1.0|1.1}>]
The version of the HTTP server.
ip debug sendto
Send UDP packets.
Syntax : sendto addr = <ip-address> [count = <number{1-1000000}>]
[size = <number{0-20000}>] [interval = <number{1-1000000}>]
[listen = <{disabled|enabled}>]
[dffield = <{disabled|enabled}>] [srcaddr = <ip-address>]
[srcport = <number{1-65535}>] dstport = <number{1-65535}>
[dstintf = <{loop|Internet|LocalNetwork}>]

Parameters :
addr = <ip-address>
The destination IP address.
[count = <number{1-1000000}>]
The number of datagrams to send.
[size = <number{0-20000}>]
The size of the datagram.
[interval = <number{1-1000000}>]
The interval in milliseconds between datagrams.
[listen = <{disabled|enabled}>]
Don't send, just listen for incoming datagrams.
[dffield = <{disabled|enabled}>]
Enables setting of the don't fragment flag in the IP headers of the ping
packet(s).
[srcaddr = <ip-address>]
The IP source address to use.
[srcport = <number{1-65535}>]
The UDP source port number to use.
dstport = <number{1-65535}>
The UDP destination port number to send to.
[dstintf = <{loop|Internet|LocalNetwork}>]
The IP interface name.
ip debug stats
Display statistics.
Syntax : stats proto = <{ip|udp|tcp|icmp}>

Parameters :
proto = <{ip|udp|tcp|icmp}>
The protocol for which to display the statistics.
ip debug traceconfig
Display/Modify IP stack trace configuration.
Syntax : traceconfig [input = <{none|label|-telnet|-host|-broadcast|all}>]
[forward = <{none|label|-telnet|-host|-broadcast|all}>]
[output = <{none|label|-telnet|-host|-broadcast|all}>]
[drop = <{none|label|-telnet|-host|-broadcast|all}>]
[path = <{none|label|-telnet|-host|-broadcast|all}>]
[mode = <{line|dump}>] [arp = <{none|all}>]

Parameters :
[input = <{none|label|-telnet|-host|-broadcast|all}>]
Define the packets that will be traced.
[forward = <{none|label|-telnet|-host|-broadcast|all}>]
Define the packets that will be traced.
[output = <{none|label|-telnet|-host|-broadcast|all}>]
Define the packets that will be traced.
[drop = <{none|label|-telnet|-host|-broadcast|all}>]
Define the packet drops that will be traced.
[path = <{none|label|-telnet|-host|-broadcast|all}>]
Define the packet that will be path-traced.
[mode = <{line|dump}>]
Packet dump method.
[arp = <{none|all}>]
Define the arp packets that will be traced.
ip flush
Flush all static IP parameters. Dynamic info (e.g. from PPP links) remains.
Syntax : flush
ip ifadd
Create an IP interface.
Syntax : ifadd intf = <string> dest = <{eth_DEFAULT|eth_WAN|eth_VOIP}>

Parameters :
intf = <string>
An IP interface name.
dest = <{eth_DEFAULT|eth_WAN|eth_VOIP}>
An network interface name.
ip ifattach
Attach an IP interface.
Syntax : ifattach intf = <{}>

Parameters :
intf = <{}>
An IP interface name.
ip ifconfig
Modify an IP interface configuration.
Syntax : ifconfig intf = <{loop|Internet|LocalNetwork}>
[mtu = <number{68-65535}>] [status = <{down|up}>]
[hwaddr = <hardware-address>]
[arpcachetimeout = <number{0-7200}>]
[group = <{wan|local|lan|tunnel|dmz|guest} or number>]
[linksensing = <{disabled|enabled}>]
[primary = <{disabled|enabled}>]
[mcastpromisc = <{disabled|enabled}>]
[symmetric = <{disabled|enabled}>]
[arpprobe = <{unicast|broadcast}>]

Parameters :
intf = <{loop|Internet|LocalNetwork}>
An IP interface name.
[mtu = <number{68-65535}>]
The maximum packet size (including IP header) to use on this interface.
[status = <{down|up}>]
The administrative state of the interface.
[hwaddr = <hardware-address>]
The hardware address (e.g. Ethernet MAC address) of this interface.
[arpcachetimeout = <number{0-7200}>]
Set the ARP cache timeout to be used for this interface (0 = use global
ARP cache timeout).
[group = <{wan|local|lan|tunnel|dmz|guest} or number>]
The group this interface belongs to. Can be used by e.g. firewalling.
[linksensing = <{disabled|enabled}>]
The IP interface's awareness of link state transitions.
[primary = <{disabled|enabled}>]
Make the IP interface the primary interface.
[mcastpromisc = <{disabled|enabled}>]
Make the IP interface multicast promiscuous.
[symmetric = <{disabled|enabled}>]
The routing mode of the IP interface.
[arpprobe = <{unicast|broadcast}>]
The ARP mode of the interface.
[mcastmode = <{(HIDDEN)}>]
(HIDDEN)
ip ifdelete
Delete an IP interface.
Syntax : ifdelete intf = <{LocalNetwork}>

Parameters :
intf = <{LocalNetwork}>
An IP interface name.
ip ifdetach
Detach an IP interface.
Syntax : ifdetach intf = <{loop|LocalNetwork}>

Parameters :
intf = <{loop|LocalNetwork}>
An IP interface name.
ip iflist
Display all IP interfaces.
Syntax : iflist [expand = <{disabled|enabled}>]
[legend = <{disabled|enabled}>]

Parameters :
[expand = <{disabled|enabled}>]
Expanded listing.
[legend = <{disabled|enabled}>]
Expanded Legend listing.
ip ifwait
Wait for a status change of an IP interface.
Syntax : ifwait intf = <{loop|Internet|LocalNetwork}>
[timeout = <number{1-600000}>] [adminstatus = <{down|up}>]
[operstatus = <{down|up}>] [linkstatus = <{down|up}>]

Parameters :
intf = <{loop|Internet|LocalNetwork}>
An IP interface name.
[timeout = <number{1-600000}>]
The timeout in seconds.
[adminstatus = <{down|up}>]
The administrative state of the interface.
[operstatus = <{down|up}>]
The operational state of the interface.
[linkstatus = <{down|up}>]
The link state of the interface.
ip ipadd
Assign an IP address to an IP interface.
Syntax : ipadd intf = <{loop|Internet|LocalNetwork}> addr = <ip-address>
[netmask = <ip-mask(dotted or cidr)>]
[pointopoint = <ip-address>] [addroute = <{disabled|enabled}>]

Parameters :
intf = <{loop|Internet|LocalNetwork}>
The IP interface name.
addr = <ip-address>
The new IP address to add.
[netmask = <ip-mask(dotted or cidr)>]
The subnetmask associated with this address.
[pointopoint = <ip-address>]
The remote address in case of a point-to-point link.
[addroute = <{disabled|enabled}>]
Add typical net/subnet routes automatically.
[type = <{(HIDDEN)}>]
(HIDDEN)
ip ipconfig
Modify an IP address configuration.
Syntax : ipconfig addr = <ip-address> [preferred = <{disabled|enabled}>]
[primary = <{disabled|enabled}>]

Parameters :
addr = <ip-address>
The IP address to configure.
[preferred = <{disabled|enabled}>]
Make IP address the preferred address for that subnet.
[primary = <{disabled|enabled}>]
Make IP address the primary address for the interface.
ip ipdelete
Remove an IP address from an IP interface.
Syntax : ipdelete addr = <ip-address>

Parameters :
addr = <ip-address>
The IP address to delete.
ip iplist
Display all configured IP addresses.
Syntax : iplist [expand = <{disabled|enabled}>]

Parameters :
[expand = <{disabled|enabled}>]
Expanded listing.
ip mcast
Following commands are available :

rtadd : Add a multicast route to the multicast routing table.

rtdelete : Delete a multicast route from the multicast routing table.
rtlist : Display the multicast routing table.
flush : Flush the multicast routing table.
ip mcast flush
Flush the multicast routing table.
Syntax : flush
ip mcast rtadd
Add a multicast route to the multicast routing table.
Syntax : rtadd srcintf = <{loop|Internet|LocalNetwork}> [src = <ip-address>]
grp = <ip-address> dstintf = <{loop|Internet|LocalNetwork}>
[ttl = <number{1-255}>] [ttlincr = <{disabled|enabled}>]

Parameters :
srcintf = <{loop|Internet|LocalNetwork}>
The source IP interface.
[src = <ip-address>]
The source IP address.
grp = <ip-address>
The multicast group IP address.
dstintf = <{loop|Internet|LocalNetwork}>
The destination IP interface.
[ttl = <number{1-255}>]
The time-to-live for that destination IP interface.
[ttlincr = <{disabled|enabled}>]
Increment TTL before packet is send.
ip mcast rtdelete
Delete a multicast route from the multicast routing table.
Syntax : rtdelete srcintf = <{loop|Internet|LocalNetwork}>
[src = <ip-address>] grp = <ip-address>
dstintf = <{loop|Internet|LocalNetwork}>

Parameters :
[expand = <{disabled|enabled}>]
Expanded listing.
ip rtadd
Add a route to the routing table.
Syntax : rtadd dst = <ip-address> [dstmsk = <ip-mask(dotted or cidr)>]
[label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|
Video|VoIP-RTP|VoIP-Signal|default|voice-only}>]
[gateway = <ip-address>]
[intf = <{loop|Internet|LocalNetwork}>]
[srcintf = <{loop|Internet|LocalNetwork}>]
[static = <{enabled|disabled}>] [status = <{up|down}>]
[metric = <number{0-255}>]

Parameters :
dst = <ip-address>
The destination IP address(es) using this route. Supports ip/mask
notation.
[dstmsk = <ip-mask(dotted or cidr)>]
The destination IP address mask.
[label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-
RTP|VoIP-Signal|default|voice-only}>]
The name of a label.
[gateway = <ip-address>]
The IP address of the next hop (direct connected gateway or extended
route)
[intf = <{loop|Internet|LocalNetwork}>]
Only for special interface routes : the outgoing IP interface name.
[srcintf = <{loop|Internet|LocalNetwork}>]
Use this interface for source address selection.
[static = <{enabled|disabled}>]
Route persistency: static or dynamic (note that not all routes can be
changed).
[status = <{up|down}>]
The administrative state of the route.
[metric = <number{0-255}>]
The metric for this route (weight factor).
[type = <{(HIDDEN)}>]
(HIDDEN)
ip rtconfig
Modify a route of the routing table.
Syntax : rtconfig dst = <ip-address> [dstmsk = <ip-mask(dotted or cidr)>]
[label = <{None|DSCP|Interactive|Management|SIPS_RTP|
SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default|voice-
only}>]
[gateway = <ip-address>]
[intf = <{loop|Internet|LocalNetwork}>]
[srcintf = <{loop|Internet|LocalNetwork|None}>]
[static = <{disabled|enabled}>] [status = <{down|up}>]
[metric = <number{0-255}>]

Parameters :
dst = <ip-address>
The destination IP address(es) using this route. Supports ip/mask
notation.
[dstmsk = <ip-mask(dotted or cidr)>]
The destination IP address mask.
[label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-
RTP|VoIP-Signal|default|voice-only}>]
The name of a label.
[gateway = <ip-address>]
The IP address of the next hop (direct connected gateway or extended
route)
[intf = <{loop|Internet|LocalNetwork}>]
Only for special interface routes : the outgoing IP interface name.
[srcintf = <{loop|Internet|LocalNetwork|None}>]
Use this interface for source address selection.
[static = <{disabled|enabled}>]
Route persistency: static or dynamic (note that not all routes can be
changed).
[status = <{down|up}>]
The administrative state of the route.
[metric = <number{0-255}>]
The metric for this route (weight factor).
ip rtdelete
Delete a route from the routing table.
Syntax : rtdelete dst = <ip-address> [dstmsk = <ip-mask(dotted or cidr)>]
[label = <{None|DSCP|Interactive|Management|SIPS_RTP|
SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default|voice-
only}>]
[gateway = <ip-address>]
[intf = <{loop|Internet|LocalNetwork}>]

Parameters :
dst = <ip-address>
The destination IP address specification of the route to delete.
Supports ip/mask notation.
[dstmsk = <ip-mask(dotted or cidr)>]
The destination IP address mask.
[label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-
RTP|VoIP-Signal|default|voice-only}>]
The name of a label.
[gateway = <ip-address>]
The IP address of the next hop.
[intf = <{loop|Internet|LocalNetwork}>]
The outgoing IP interface name. (For special interface routes only).
ip rtlist
Display the routing table.
Syntax : rtlist [expand = <{disabled|enabled}>]

Parameters :
[expand = <{disabled|enabled}>]
Expanded listing.
ipqos
Following commands are available :

config : Modify the IP QoS configuration for a given destination of

an interface.
list : Display the IP QoS configuration.

Following command groups are available :

ef meter queue
ipqos config
Modify the IP QoS configuration for a given destination of an interface.
Syntax : config dest = <{}> [state = <{disabled|enabled}>]
[discard = <{tail|early}>] [priority = <{wfq|strict|wrr}>]
[realtimerate = <number{1-100}>] [burstsize = <number{1-64}>]
[qtyrealtimequeues = <number{1-3}>]
[backgroundqueue = <{disabled|enabled}>]
[ecnthreshold = <number{1-99}>] [weight1 = <number{1-99}>]
[weight2 = <number{1-99}>] [weight3 = <number{0-98}>]
[weight4 = <number{0-97}>] [weight5 = <number{0-96}>]
[maxpackets = <number{0-500}>] [maxbytes = <number{0-256}>]

Parameters :
dest = <{}>
The destination of the interface. Typically, a phonebook entry.
[state = <{disabled|enabled}>]
Enable, disable IP QoS for the interface.
[discard = <{tail|early}>]
The packet discard strategy in case of congestion.
[priority = <{wfq|strict|wrr}>]
The subqueue priority algorithm.
[realtimerate = <number{1-100}>]
The percentage of the bandwith.
[burstsize = <number{1-64}>]
Burstsize in kilo bytes (KB).
[qtyrealtimequeues = <number{1-3}>]
Number of real-time priority queues.
[backgroundqueue = <{disabled|enabled}>]
Enable, disable the best effort background queue.
[ecnthreshold = <number{1-99}>]
The ECN marking threshold.
[weight1 = <number{1-99}>]
The weight of queue 1 used for weighted fair queueing (WFQ) or weighted
round robin (WRR).
[weight2 = <number{1-99}>]
The weight of queue 2 used for weighted fair queueing (WFQ) or weighted
round robin (WRR).
[weight3 = <number{0-98}>]
The weight of queue 3 used for weighted fair queueing (WFQ) or weighted
round robin (WRR).
[weight4 = <number{0-97}>]
The weight of queue 4 used for weighted fair queueing (WFQ) or weigthed
round robin (WRR).
[weight5 = <number{0-96}>]
The weight of queue 5 used for weighted fair queueing (WFQ) or weigthed
round robin (WRR).
[maxpackets = <number{0-500}>]
The maximum number of packets in all queues.
[maxbytes = <number{0-256}>]
The maximum size in kilo bytes (KB) in all queues.
ipqos ef
Following commands are available :

config : Modify an IP QoS EF timer configuration for an interface.

list : Display the IP QoS EF timers.
stats : Display the IP QoS EF timer statistics.
ipqos ef config
Modify an IP QoS EF timer configuration for an interface.
Syntax : config intf = <{loop|Internet|LocalNetwork}>
[state = <{disabled|enabled}>]
[timeout = <number{100-10000}>] [mtu = <number{68-65535}>]

Parameters :
intf = <{loop|Internet|LocalNetwork}>
The IP interface name.
[state = <{disabled|enabled}>]
Enable, disable IP QoS EF timer for the interface.
[timeout = <number{100-10000}>]
The timeout in mili seconds.
[mtu = <number{68-65535}>]
The MTU of the IP interface in case of EF data.
ipqos ef list
Display the IP QoS EF timers.
Syntax : list
ipqos ef stats
Display the IP QoS EF timer statistics.
Syntax : stats
ipqos list
Display the IP QoS configuration.
Syntax : list
ipqos meter
Following commands are available :

add : Add an IP QoS meter.

config : Modify an IP QoS meter configuration.
delete : Delete an IP QoS meter.
list : Display the IP QoS meters.
start : Start an IP QoS meter.
stop : Stop an IP QoS meter.
flush : Flush all IP QoS meters.
stats : Display the IP QoS meter statistics.
clear : Clear the IP QoS meter statistics.
ipqos meter add
Add an IP QoS meter.
Syntax : add name = <string>

Parameters :
name = <string>
The name of the IP QoS meter.
ipqos meter clear
Clear the IP QoS meter statistics.
Syntax : clear
ipqos meter config
Modify an IP QoS meter configuration.
Syntax : config name = <{}>
[label = <{DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|
VoIP-RTP|VoIP-Signal|default|voice-only}>]
[intf = <{loop|Internet|LocalNetwork}>]
[droprate = <number{0-102400}>]
[markrate = <number{0-102400}>] [burst = <number{0-64}>]
[dropaction = <{count|drop}>] [markaction = <{count|mark}>]
[tosmarking = <{disabled|enabled}>] [tos = <number{0-255}>]
[dscp = <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41|
af42|af43|cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>]

[precedence = <{routine|priority|immediate|flash|flash-
override|CRITIC-ECP|internetwork-control|network-
control} or number>]
[classification = <{decrease|overwrite|ignore|offset}>]
[class = <number{0-15}>]

Parameters :
name = <{}>
The name of the IP QoS meter.
[label = <{DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-RTP|
VoIP-Signal|default|voice-only}>]
The name of the label.
[intf = <{loop|Internet|LocalNetwork}>]
The name of the interface.
[droprate = <number{0-102400}>]
The drop rate in kilo bits per second (Kbps).
[markrate = <number{0-102400}>]
The mark rate in kilo bits per second (Kbps).
[burst = <number{0-64}>]
The burst size in kilo bytes (KB).
[dropaction = <{count|drop}>]
The drop action.
[markaction = <{count|mark}>]
The mark action.
[tosmarking = <{disabled|enabled}>]
Enable tos marking for marked packets.
[tos = <number{0-255}>]
The type of service used for tos marking.
[dscp = <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41|af42|af43|
cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>]
The diffserv code point (part of tos, used for tos-marking).
[precedence = <{routine|priority|immediate|flash|flash-override|CRITIC-ECP|
internetwork-control|network-control} or number>]
The precedence (part of tos, used for tos-marking).
[classification = <{decrease|overwrite|ignore|offset}>]
The type of classification for marked packets.
[class = <number{0-15}>]
The class or offset used for classification.
ipqos meter delete
Delete an IP QoS meter.
Syntax : delete name = <{}>

Parameters :
name = <{}>
The name of the IP QoS meter.
ipqos meter flush
Flush all IP QoS meters.
Syntax : flush
ipqos meter list
Display the IP QoS meters.
Syntax : list
ipqos meter start
Start an IP QoS meter.
Syntax : start name = <{}>

Parameters :
name = <{}>
The name of the stopped IP QoS meter.
ipqos meter stats
Display the IP QoS meter statistics.
Syntax : stats
ipqos meter stop
Stop an IP QoS meter.
Syntax : stop name = <{}>

Parameters :
name = <{}>
The name of the started IP QoS meter.
ipqos queue
Following commands are available :

config : Modify the IP QoS subqueue configuration.

list : Display the IP QoS subqueue configuration.
stats : Display the IP QoS subqueue statistics.
clear : Clear the IP QoS statistics.
ipqos queue clear
Clear the IP QoS statistics.
Syntax : clear
ipqos queue config
Modify the IP QoS subqueue configuration.
Syntax : config dest = <{}> queue = <number{0-5}> [discard = <{tail|early}>]
[propagate = <{disabled|enabled}>]
[ecnmarking = <{disabled|enabled}>]
[maxrate = <number{1-100}>] [maxburst = <number{1-64}>]
[ackfiltering = <{disabled|enabled}>]
[maxpackets = <number{0-500}>] [maxbytes = <number{0-256}>]
[respackets = <number{0-500}>] [resbytes = <number{0-256}>]
[hold = <number>] [markprob = <number{1-1000}>]
[loprio = <number{0-15}>] [hiprio = <number{0-15}>]

Parameters :
dest = <{}>
The destination of the interface. Typically, a phonebook entry.
queue = <number{0-5}>
The number of the subqueue.
[discard = <{tail|early}>]
The packet discard strategy in case of congestion.
[propagate = <{disabled|enabled}>]
Propagate the packets in lower priority queue iso. dropping.
[ecnmarking = <{disabled|enabled}>]
Enable Explicit Congestion Notification for IP packets in this subqueue.
[maxrate = <number{1-100}>]
The percentage of the bandwith.
[maxburst = <number{1-64}>]
Burstsize in kilo bytes (KB).
[ackfiltering = <{disabled|enabled}>]
Enable filtering of TCP ACK packets.
[maxpackets = <number{0-500}>]
The maximum number of packets in the subqueue.
[maxbytes = <number{0-256}>]
The maximum subqueue size in kilo bytes (KB).
[respackets = <number{0-500}>]
The reserved number of packets in the subqueue.
[resbytes = <number{0-256}>]
The reserved subqueue size in kilo bytes (KB).
[hold = <number>]
The hold time in microseconds for early discard strategy.
[markprob = <number{1-1000}>]
The maximum packet marking probability in parts per mille for early
discard strategy.
[loprio = <number{0-15}>]
The lowest internal priority boundary for entering this queue.
[hiprio = <number{0-15}>]
The highest internal priority boundary for entering this queue.
ipqos queue list
Display the IP QoS subqueue configuration.
Syntax : list [dest = <{}>]

Parameters :
[dest = <{}>]
The destination of the interface. Typically, a phonebook entry.
ipqos queue stats
Display the IP QoS subqueue statistics.
Syntax : stats [dest = <{}>]

Parameters :
[dest = <{}>]
The destination of the interface. Typically, a phonebook entry.
[HIDDEN]koa
Following commands are available :

a : Add atomic object key information

koa a
Add atomic object key information
Syntax : a d = <string> [l = <{no|yes}>]

Parameters :
d = <string>
Data blob
[l = <{no|yes}>]
Last line in koi list
[HIDDEN]koi
Following commands are available :

a : Add igd object key information

koi a
Add igd object key information
Syntax : a d = <string> [l = <{no|yes}>]

Parameters :
d = <string>
Data blob
[l = <{no|yes}>]
Last line in koi list
[HIDDEN]kta
Following commands are available :

a : Add atomic type key information

kta a
Add atomic type key information
Syntax : a d = <string> [l = <{no|yes}>]

Parameters :
d = <string>
Data blob
[l = <{no|yes}>]
Last line in koi list
[HIDDEN]kti
Following commands are available :

a : Add igd type key information

kti a
Add igd type key information
Syntax : a d = <string> [l = <{no|yes}>]

Parameters :
d = <string>
Data blob
[l = <{no|yes}>]
Last line in koi list
label
Following commands are available :

add : Add a label.

modify : Modify a label configuration.
delete : Delete a label.
list : Display the labels.
flush : Flush all label.

Following command groups are available :

chain rule
label add
Add a label.
Syntax : add name = <string>

Parameters :
name = <string>
The name of a label to add.
label chain
Following commands are available :

add : Add a chain.

delete : Delete a chain.
list : Display a list of chains.
flush : Flush all chains.
label chain add
Add a chain.
Syntax : add chain = <string>

Parameters :
chain = <string>
The name of the chain to add.
[policy = <{(HIDDEN)}>]
(HIDDEN)
label chain delete
Delete a chain.
Syntax : delete chain = <chain name>

Parameters :
chain = <chain name>
The name of the chain to delete.
label chain flush
Flush all chains.
Syntax : flush
label chain list
Display a list of chains.
Syntax : list [format = <{pretty|cli}>]

Parameters :
[format = <{pretty|cli}>]
The format of the chain list.
[HIDDEN]label chain modify
Modify a chain.
Syntax : modify chain = <chain name>

Parameters :
chain = <chain name>
The name of the chain to modify.
[policy = <{(HIDDEN)}>]
(HIDDEN)
label delete
Delete a label.
Syntax : delete name = <{DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|
VoIP-RTP|VoIP-Signal|default|voice-only}>

Parameters :
name = <{DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-RTP|VoIP-
Signal|default|voice-only}>
The name of a label.
label flush
Flush all label.
Syntax : flush
label list
Display the labels.
Syntax : list [name = <{DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|
VoIP-RTP|VoIP-Signal|default|voice-only}>]

Parameters :
[name = <{DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-RTP|VoIP-
Signal|default|voice-only}>]
The name of a label.
label modify
Modify a label configuration.
Syntax : modify name = <{DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|
VoIP-RTP|VoIP-Signal|default|voice-only}>
[classification = <{ignore|overwrite|increase}>]
[defclass = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|dscp|
default}>]
[ackclass = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|prioritize|
defclass}>]
[bidirectional = <{disabled|enabled}>]
[inheritance = <{disabled|enabled}>]
[tosmarking = <{disabled|enabled}>] [tos = <number{0-255}>]
[dscp = <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41|
af42|af43|cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>]

[precedence = <{routine|priority|immediate|flash|flash-
override|CRITIC-ECP|internetwork-control|network-
control} or number>]
[trace = <{disabled|enabled}>]

Parameters :
name = <{DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-RTP|VoIP-
Signal|default|voice-only}>
The name of a label to modify.
[classification = <{ignore|overwrite|increase}>]
The Method of classification.
[defclass = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|dscp|default}>]
The default class of assigned connection.
[ackclass = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|prioritize|defclass}>]
The class of ACK segments of TCP connection.
[bidirectional = <{disabled|enabled}>]
The label is also valid for returning stream.
[inheritance = <{disabled|enabled}>]
The label is also valid for corresponding stream of child connection.
[tosmarking = <{disabled|enabled}>]
Enable/disable TOS marking.
[tos = <number{0-255}>]
The Type Of Service specification in the IP packet (used for tos-
marking).
[dscp = <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41|af42|af43|
cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>]
The diffserv code point (part of tos, used for tos-marking).
[precedence = <{routine|priority|immediate|flash|flash-override|CRITIC-ECP|
internetwork-control|network-control} or number>]
The precedence (part of tos, used for tos-marking).
[trace = <{disabled|enabled}>]
Enable/disable IP tracing for this label.
label rule
Following commands are available :

add : Add a rule.

delete : Delete a rule.
modify : Modify a rule.
list : Display a list of rules.
flush : Flush all rules.

Following command groups are available :

debug
label rule add
Add a rule.
Syntax : add chain = <chain name> [index = <number>] [name = <string>]
[clink = <chain name>]
[srcintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>]
[srcip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|
192.168.1.253}>]
[dstip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|
192.168.1.253}>]
[serv [!]= <{ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|
SMB|imap|imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|
ssh|dns|nntp|ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp|
rtsp|ssdp_serv|mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP-
Inc-SIP-TCP|VoIP-Inc-RTP}>]
[length [!]= <{}>] [log = <{disabled|enabled}>]
[state = <{disabled|enabled}>]
label = <{None|link|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|
Video|VoIP-RTP|VoIP-Signal|default|voice-only}>

Parameters :
chain = <chain name>
The name of the chain which contains the rule.
[index = <number>]
The index of the rule in the chain.
[name = <string>]
The name of the new rule.
[clink = <chain name>]
The name of the chain to be parsed when this rule applies.
[srcintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>]
The name of the source interface expression.
[srcip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253}>]
The name of the source ip expression.
[dstip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253}>]
The name of the destination ip expression.
[serv [!]= <{ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|SMB|imap|
imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|ssh|dns|nntp|ipsec|
esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv|mdap_serv|
syslog|VoIP-Inc-SIP-UDP|VoIP-Inc-SIP-TCP|VoIP-Inc-RTP}>]
The name of the service expression.
[length [!]= <{}>]
The name of the length expression.
[log = <{disabled|enabled}>]
Disable/Enable logging when this rule applies.
[state = <{disabled|enabled}>]
Disable/Enable this rule.
label = <{None|link|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|
VoIP-RTP|VoIP-Signal|default|voice-only}>
None, link (when clink is used) or label name.
[newindex = <{(HIDDEN)}>]
(HIDDEN)
[dstintf = <{(HIDDEN)}>]
(HIDDEN)
[srcmac = <{(HIDDEN)}>]
(HIDDEN)
[connstate = <{(HIDDEN)}>]
(HIDDEN)
label rule debug
Following commands are available :

traceconfig : Display/Modify rule trace configuration.

stats : Display rule statistics.
clear : Clear rule statistics.
label rule debug clear
Clear rule statistics.
Syntax : clear [chain = <chain name>] [index = <number>]

Parameters :
[chain = <chain name>]
The name of the chain.
[index = <number>]
The index of the rule in the chain.
label rule debug stats
Display rule statistics.
Syntax : stats [chain = <chain name>] [index = <number>]

Parameters :
[chain = <chain name>]
The name of the chain.
[index = <number>]
The index of the rule in the chain.
label rule debug traceconfig
Display/Modify rule trace configuration.
Syntax : traceconfig [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Disable/Enable rule traces.
label rule delete
Delete a rule.
Syntax : delete chain = <chain name> index = <number>

Parameters :
chain = <chain name>
The name of the chain in which to delete the rule.
index = <number>
The number of the rule in the chain.
label rule flush
Flush all rules.
Syntax : flush [chain = <chain name>]

Parameters :
[chain = <chain name>]
The name of the chain to flush.
label rule list
Display a list of rules.
Syntax : list [chain = <chain name>] [format = <{pretty|cli}>]

Parameters :
[chain = <chain name>]
The name of the chain to list the rules of.
[format = <{pretty|cli}>]
The format of the rule list.
label rule modify
Modify a rule.
Syntax : modify chain = <chain name> [index = <number>] [newindex = <number>]
[name = <string>] [clink = <chain name>] [[!]srcintf]
[[!]srcip] [[!]dstip] [[!]serv] [[!]length]
[log = <{disabled|enabled}>] [state = <{disabled|enabled}>]
[label = <{None|link|DSCP|Interactive|Management|SIPS_RTP|
SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default|voice-
only}>]

Parameters :
chain = <chain name>
The name of the chain which contains the rule.
[index = <number>]
The index of the rule in the chain.
[newindex = <number>]
The new index of the rule in the chain.
[name = <string>]
The name of the new rule.
[clink = <chain name>]
The name of the chain to be parsed when this rule applies.
[[!]srcintf]
The name of the source interface expression.
[[!]srcip]
The name of the source ip expression.
[[!]dstip]
The name of the destination ip expression.
[[!]serv]
The name of the service expression.
[[!]length]
The name of the length expression.
[log = <{disabled|enabled}>]
Disable/Enable logging when this rule applies.
[state = <{disabled|enabled}>]
Disable/Enable this rule.
[label = <{None|link|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|
VoIP-RTP|VoIP-Signal|default|voice-only}>]
None, link (when clink is used) or label name.
[dstintf = <{(HIDDEN)}>]
(HIDDEN)
[srcmac = <{(HIDDEN)}>]
(HIDDEN)
[connstate = <{(HIDDEN)}>]
(HIDDEN)
language
Following commands are available :

config : Select a language.

list : List available languages archives.
delete : Delete one or all language archives.
language config
Select a language.
Syntax : config [language = <string>] [complete = <{yes|no}>]

Parameters :
[language = <string>]
Language code : OSI language code (2 chars) for language (en=English)
[complete = <{yes|no}>]
Enable translation for expert pages.
language delete
Delete one or all language archives.
Syntax : delete [file = <string>] [all <{yes|no}>]

Parameters :
[file = <string>]
Filename : name of language archive to delete
[all <{yes|no}>]
Deletes all languages archives.
[HIDDEN]language exclude
Exclude a file from translation
Syntax : exclude file = <string>

Parameters :
file = <string>
Filename : name of file to exclude from translation
[HIDDEN]language flush
Flush list of files excluded from translation
Syntax : flush
[HIDDEN]language langdef
Setting language definition context
Syntax : langdef lang = <string>

Parameters :
lang = <string>
Language code : OSI language code (2 chars) for language (en=English)
[charset = <{(HIDDEN)}>]
(HIDDEN)
language list
List available languages archives.
Syntax : list
[HIDDEN]language t
Add a translation record.
Syntax : t r = <quoted string>

Parameters :
r = <quoted string>
Translation record string "number,text"
led
Following command groups are available :

devicecheck
led devicecheck
Following commands are available :

config : Config the device checker

add : Add a device check MAC range
delete : Delete a device check MAC range
list : List all device check MAC ranges
led devicecheck add
Add a device check MAC range
Syntax : add mac = <masked-hardware-address>

Parameters :
mac = <masked-hardware-address>
MAC address range
led devicecheck config
Config the device checker
Syntax : config [state = <{disabled|enabled}>]
[physintf = <{ethif1|ethif2|ethif3|ethif4|ethif5}>]
[flashing = <{enabled|disabled}>]
[vlan = <{default|WAN|VOIP}>]

Parameters :
[state = <{disabled|enabled}>]
Enable or disable device checker
[physintf = <{ethif1|ethif2|ethif3|ethif4|ethif5}>]
The monitored port
[flashing = <{enabled|disabled}>]
Enable or disable the IPTV LED flashing
[vlan = <{default|WAN|VOIP}>]
VLAN name
led devicecheck delete
Delete a device check MAC range
Syntax : delete mac = <masked-hardware-address>

Parameters :
mac = <masked-hardware-address>
MAC address range
led devicecheck list
List all device check MAC ranges
Syntax : list
mbus
Following commands are available :

listenums : Display the registered enumtypes

listtypes : Display the registered objecttypes
listobjects : Display the object instances
listcontexts : Display the context instances
listsubscriptions : Display the subscription instances
pluginevent : Simulate event from plugin
unregister : Unregister a client/plugin context
xmldump : Dump the registered datamodel to an XML file

Following command groups are available :

client debug
mbus client
Following commands are available :

register : Register cli client to mbus

unregister : Unregister cli client from mbus
config : Modify client parameters
exec : Execute mbus command
authenticate : Authenticate a session
termsession : Terminate a session
mbus client authenticate
Authenticate a session
Syntax : authenticate type = <{cleartext|crypt|digest|defaultuser}>
[username = <quoted string>] [password = <password>]
[addr = <ip-address>]

Parameters :
type = <{cleartext|crypt|digest|defaultuser}>
Authentication type
[username = <quoted string>]
User name
[password = <password>]
password
[addr = <ip-address>]
IP address of peer who inititated the authentication request.
mbus client config
Modify client parameters
Syntax : config [writelock = <{enabled|disabled}>] [wlgetimeout = <number>]
[wlidletimeout = <number>] [path = <quoted string>]
[type = <{indexpath|keystrpath}>] [id = <number>]

Parameters :
[writelock = <{enabled|disabled}>]
Get/release mbus writelock
[wlgetimeout = <number>]
Writelock get timeout in seconds (forever=-1, *default=nowait=0)
[wlidletimeout = <number>]
Writelock idle timeout in seconds (forever=-1, *default=30)
[path = <quoted string>]
Fully qualified mbus path
[type = <{indexpath|keystrpath}>]
Path type (default = indexpath)
[id = <number>]
sessionid to use
mbus client exec
Execute mbus command
Syntax : exec cmd = <{getpath|getcount|getnames|getvalues|setvalue|addobject|
deleteobject|subscribe|unsubscribe|getaccessrights|
setaccessrights}>
[param = <quoted string>] [value = <quoted string>]
[gettype = <{parameter|path|object}>] [depth = <number>]
[processcmd = <{enabled|disabled}>]
[onerrorrollback = <{enabled|disabled}>]
[usecallback = <{enabled|disabled}>] [filter = <quoted string>]
[path = <quoted string>]
[flags = <[+/-]flag[+/-flag...]{indexpath keystrpath uncommitted
dynamic synchronize sub_addobj sub_delobj sub_update
firstnext xref_localidx xref_keypath exact_depth
noparamvalue applyonparams applyrecursive typetreepath
non_persistent}>]
[accesslist = <quoted string>]
[action = <[+/-]flag[+/-flag...]{read write attrchg}>]
[modifier = <{add|delete|allow_only|allow_except}>]
[replytype = <{getallowed|getdisallowed|getasconfigured}>]
[attribute = <{ar_archg|ar_read|ar_write|param_cached|
param_enums|param_eventable|param_key|param_min|
param_mandatory|param_max|param_readable|param_type|
param_writable|param_xrefs|objtype_cached|
objtype_max|objtype_writable|object_clean|
object_dynamic|type}>]
[timing = <{disabled|enabled}>]
[no_output = <{disabled|enabled}>]

Parameters :
cmd = <{getpath|getcount|getnames|getvalues|setvalue|addobject|deleteobject|
subscribe|unsubscribe|getaccessrights|setaccessrights}>
Mbus command name
[param = <quoted string>]
Parameter name
[value = <quoted string>]
Parameter value to set
[gettype = <{parameter|path|object}>]
Get type elements (default=param)
[depth = <number>]
Number of levels to recurse, default=-1 (all)
[processcmd = <{enabled|disabled}>]
Process SET_VALUE command flag (default=enabled)
[onerrorrollback = <{enabled|disabled}>]
on error rollback flag (default=enabled)
[usecallback = <{enabled|disabled}>]
Use result callback function (default=enabled)
[filter = <quoted string>]
The filter should be formatted as '(operator operand operand)'. Possible
operators are ==, !=, <, <=, >, >=, and, or, not. The left operand is a
parameter name. The right operand is a parameter value. For boolean
operators the operands are filters. Example: '(== Name eth0)'.
[path = <quoted string>]
Fully qualified mbus path
[flags = <[+/-]flag[+/-flag...]{indexpath keystrpath uncommitted dynamic
synchronize sub_addobj sub_delobj sub_update firstnext
xref_localidx xref_keypath exact_depth noparamvalue applyonparams
applyrecursive typetreepath non_persistent}>]
Client command data flags
[accesslist = <quoted string>]
Comma separated names of accessrights groups
[action = <[+/-]flag[+/-flag...]{read write attrchg}>]
Type of accessright action
[modifier = <{add|delete|allow_only|allow_except}>]
Accessrights modifier
[replytype = <{getallowed|getdisallowed|getasconfigured}>]
Type of accessrights reply
[attribute = <{ar_archg|ar_read|ar_write|param_cached|param_enums|
param_eventable|param_key|param_min|param_mandatory|param_max|
param_readable|param_type|param_writable|param_xrefs|
objtype_cached|objtype_max|objtype_writable|object_clean|
object_dynamic|type}>]
Requested attribute-type
[timing = <{disabled|enabled}>]
Print duration of command invocation (default=disabled)
[no_output = <{disabled|enabled}>]
Discard the output of the command (default=disabled)
mbus client register
Register cli client to mbus
Syntax : register [dmtree = <{igd|atomic|system}>]
[type = <{indexpath|keystrpath}>]
[dlink = <{local_ipc|remote_inet}>]
[mbusd_addr = <quoted string>]
[refresolv = <{disabled|enabled}>]
[state_events = <{disabled|enabled}>]

Parameters :
[dmtree = <{igd|atomic|system}>]
Select mbusd datamodel tree.
[type = <{indexpath|keystrpath}>]
Path type (default = indexpath)
[dlink = <{local_ipc|remote_inet}>]
Daemon link (default = local_ipc)
[mbusd_addr = <quoted string>]
Daemon address (ip addr for inet)
[refresolv = <{disabled|enabled}>]
Use reference resolving (default=disabled)
[state_events = <{disabled|enabled}>]
Context should be notified when the MBus state changes (default=disabled)
mbus client termsession
Terminate a session
Syntax : termsession id = <number>

Parameters :
id = <number>
id of session to terminate
mbus client unregister
Unregister cli client from mbus
Syntax : unregister
mbus debug
Following commands are available :

stats : Display mbus statistics.

clearstats : Reset mbus statistics.
traceconfig : Modify mbus trace settings.
loadobjects : Load/sync object instances from plugins
unloadobjects : Unload object instances
commconfig : Modify communication settings.
mbus debug clearstats
Reset mbus statistics.
Syntax : clearstats
mbus debug commconfig
Modify communication settings.
Syntax : commconfig [pong-to = <number>]

Parameters :
[pong-to = <number>]
MBus message communication pong time-out.
mbus debug loadobjects
Load/sync object instances from plugins
Syntax : loadobjects [dmtree = <{igd|atomic|system}>]
[path = <quoted string>]
[type = <{indexpath|keystrpath}>]
[flush = <{disabled|enabled}>]

Parameters :
[dmtree = <{igd|atomic|system}>]
Select mbusd datamodel tree.
[path = <quoted string>]
Fully qualified mbus path
[type = <{indexpath|keystrpath}>]
Path type (default = indexpath
[flush = <{disabled|enabled}>]
Flush objects before load (default=disabled)
[eventing = <{(HIDDEN)}>]
(HIDDEN)
[notifyplugin = <{(HIDDEN)}>]
(HIDDEN)
mbus debug stats
Display mbus statistics.
Syntax : stats
mbus debug traceconfig
Modify mbus trace settings.
Syntax : traceconfig [level = <number{0-4}>]

Parameters :
[level = <number{0-4}>]
Select mbus trace level (0-4).
mbus debug unloadobjects
Unload object instances
Syntax : unloadobjects [dmtree = <{igd|atomic|system}>]
[path = <quoted string>]
[type = <{indexpath|keystrpath}>]
[flush = <{disabled|enabled}>]

Parameters :
[dmtree = <{igd|atomic|system}>]
Select mbusd datamodel tree.
[path = <quoted string>]
Fully qualified mbus path
[type = <{indexpath|keystrpath}>]
Path type
[flush = <{disabled|enabled}>]
Flush objects before load (default=disabled)
[eventing = <{(HIDDEN)}>]
(HIDDEN)
[notifyplugin = <{(HIDDEN)}>]
(HIDDEN)
mbus listcontexts
Display the context instances
Syntax : listcontexts [dmtree = <{igd|atomic|system}>]
[expand = <{disabled|enabled}>]

Parameters :
[dmtree = <{igd|atomic|system}>]
Select mbusd datamodel tree.
[expand = <{disabled|enabled}>]
Details enabled/disabled
mbus listenums
Display the registered enumtypes
Syntax : listenums [dmtree = <{igd|atomic|system}>] [name = <quoted string>]
[expand = <{disabled|enabled}>]

Parameters :
[dmtree = <{igd|atomic|system}>]
Select mbusd datamodel tree.
[name = <quoted string>]
Filter enumtypes by (part of) the name
[expand = <{disabled|enabled}>]
Details enabled/disabled
mbus listobjects
Display the object instances
Syntax : listobjects [dmtree = <{igd|atomic|system}>]
[path = <quoted string>]
[type = <{indexpath|keystrpath}>]
[output = <{tree|list}>]
[showflags = <{disabled|enabled}>]

Parameters :
[dmtree = <{igd|atomic|system}>]
Select mbusd datamodel tree.
[path = <quoted string>]
Fully qualified mbus path to list.
[type = <{indexpath|keystrpath}>]
Path type (default = indexpath)
[output = <{tree|list}>]
List output type
[showflags = <{disabled|enabled}>]
Display object flags (Clean or Dirty / Persistent or Volatile)
mbus listsubscriptions
Display the subscription instances
Syntax : listsubscriptions [dmtree = <{igd|atomic|system}>]

Parameters :
[dmtree = <{igd|atomic|system}>]
Select mbusd datamodel tree.
mbus listtypes
Display the registered objecttypes
Syntax : listtypes [dmtree = <{igd|atomic|system}>] [path = <quoted string>]
[expand = <{disabled|enabled}>]

Parameters :
[dmtree = <{igd|atomic|system}>]
Select mbusd datamodel tree.
[path = <quoted string>]
Fully qualified mbus path to list.
[expand = <{disabled|enabled}>]
Details enabled/disabled
mbus pluginevent
Simulate event from plugin
Syntax : pluginevent ctxid = <number> type = <{addobj|delobj|updobj}>
path = <quoted string> [name = <quoted string>]
[value = <quoted string>] [orivalue = <quoted string>]
[flags = <[+/-]flag[+/-flag...]{dynamic save}>]

Parameters :
ctxid = <number>
Plugin context id
type = <{addobj|delobj|updobj}>
Event type
path = <quoted string>
Plugin event subpath
[name = <quoted string>]
Plugin event name
[value = <quoted string>]
Plugin event value
[orivalue = <quoted string>]
Plugin event orivalue
[flags = <[+/-]flag[+/-flag...]{dynamic save}>]
Plug-in event flags
mbus unregister
Unregister a client/plugin context
Syntax : unregister id = <number>

Parameters :
id = <number>
Select message-based client/plugin context id.
mbus xmldump
Dump the registered datamodel to an XML file
Syntax : xmldump filename = <string> [format = <{unix|mac|windows}>]

Parameters :
filename = <string>
Filename.
[format = <{unix|mac|windows}>]
Select output file format.
memm
Following commands are available :

stats : Display memm statistics.

listobjects : Display objects.

Following command groups are available :

debug
memm debug
Following commands are available :

stats : Display memm time statistics.

clearstats : Clear time statistics.
traceconfig : Modify memm trace settings.
tag : (Un)tag memory manager objects.

Following command groups are available :

lock
memm debug clearstats
Clear time statistics.
Syntax : clearstats
memm debug lock
Following commands are available :

stats : Display lock statistics.

traceconfig : Modify lock trace settings.
memm debug lock stats
Display lock statistics.
Syntax : stats
memm debug lock traceconfig
Modify lock trace settings.
Syntax : traceconfig [level = <number{0-4}>] [name = <quoted string>]
[showtid = <{no|yes}>]

Parameters :
[level = <number{0-4}>]
Select memm trace level (0-4).
[name = <quoted string>]
application name filter for lock traces (empty displays all lock traces)
[showtid = <{no|yes}>]
Display task IDs when hitting lock time-outs (disabled by default)
memm debug stats
Display memm time statistics.
Syntax : stats [name = <quoted string>]

Parameters :
[name = <quoted string>]
Select typename(s) to list (supports partial typename)
memm debug tag
(Un)tag memory manager objects.
Syntax : tag [name = <quoted string>] [tag = <{enabled|disabled}>]

Parameters :
[name = <quoted string>]
Select typename(s) to list (supports partial typename)
[tag = <{enabled|disabled}>]
Set (or unset) the tag
memm debug traceconfig
Modify memm trace settings.
Syntax : traceconfig [level = <number{0-4}>]

Parameters :
[level = <number{0-4}>]
Select memm trace level (0-4).
memm listobjects
Display objects.
Syntax : listobjects [name = <quoted string>] [tagged = <{no|yes}>]
[hidedeldynstr = <{no|yes}>]

Parameters :
[name = <quoted string>]
Select typename(s) to list (supports partial typename)
[tagged = <{no|yes}>]
Show only tagged (yes) or untagged (no) objects
[hidedeldynstr = <{no|yes}>]
Hide (yes) / show (no) deleted dynstrings (default = show)
memm stats
Display memm statistics.
Syntax : stats [name = <quoted string>]

Parameters :
[name = <quoted string>]
Select typename(s) to list (supports partial typename)
mlp
Following commands are available :

import : Import all scores.

flush : Flush all mlp structures.

Following command groups are available :

debug privilege role

mlp debug
Following commands are available :

export : Export all scores.

stats : Display mlp statistics.
traceconfig : Modify mlp trace settings.
mlp debug export
Export all scores.
Syntax : export
mlp debug stats
Display mlp statistics.
Syntax : stats
mlp debug traceconfig
Modify mlp trace settings.
Syntax : traceconfig [trace = <{disabled|enabled|full}>]

Parameters :
[trace = <{disabled|enabled|full}>]
Select mlp trace level.
mlp flush
Flush all mlp structures.
Syntax : flush
mlp import
Import all scores.
Syntax : import [allow_dl = <{no|yes}>] [trace = <{disabled|enabled|full}>]

Parameters :
[allow_dl = <{no|yes}>]
Enable/disable support for /dl/ folder
[trace = <{disabled|enabled|full}>]
Select import trace level.
[HIDDEN]mlp interaction
Following commands are available :

list : Display the interactions.

config : Display/Modify the interaction score.
addzone : Add the zone to the interaction score.
removezone : Remove the zone from interaction score.
mlp interaction addzone
Add the zone to the interaction score.
Syntax : addzone name = <quoted string> type = <{cli|cgi|file|mdap|ftp}>
zone = <> [scorenr = <number{1-2}>]

Parameters :
name = <quoted string>
Select the interaction name.
type = <{cli|cgi|file|mdap|ftp}>
Select the interaction type.
zone = <>
Zone to add.
[scorenr = <number{1-2}>]
Select score number to change.
mlp interaction config
Display/Modify the interaction score.
Syntax : config name = <quoted string> [type = <{cli|cgi|file|mdap|ftp|*}>]
[score = <{hex-word}[:{hex-word}] ex: 'a12:c30f'>]
[score2 = <{hex-word}[:{hex-word}] ex: 'a12:c30f'>]
[verbose = <{minimal|medium|all}>]
[recurse = <{disabled|enabled}>]

Parameters :
name = <quoted string>
Select the interaction name.
[type = <{cli|cgi|file|mdap|ftp|*}>]
Select the interaction type.
[score = <{hex-word}[:{hex-word}] ex: 'a12:c30f'>]
Set the score.
[score2 = <{hex-word}[:{hex-word}] ex: 'a12:c30f'>]
Set the score2.
[verbose = <{minimal|medium|all}>]
Limit the output list.
[recurse = <{disabled|enabled}>]
Recursive config (cli only).
mlp interaction list
Display the interactions.
Syntax : list [type = <{cli|cgi|file|mdap|ftp}>]
[verbose = <{minimal|medium|all}>] [name = <quoted string>]

Parameters :
[type = <{cli|cgi|file|mdap|ftp}>]
Select the interaction type.
[verbose = <{minimal|medium|all}>]
Limit the output list.
[name = <quoted string>]
Select a subgroup to list.
mlp interaction removezone
Remove the zone from interaction score.
Syntax : removezone name = <quoted string> type = <{cli|cgi|file|mdap|ftp}>
zone = <> [scorenr = <number{1-2}>]

add : Add a privilege.

delete : Delete a privilege.
addzone : Add a zone to a privilege.
removezone : Remove a zone from a privilege.
list : Display the privileges.
config : Modify the privilege.
mlp privilege add
Add a privilege.
Syntax : add name = <string> type = <{access|service}>
[descr = <quoted string>]

Parameters :
name = <string>
Privilege name.
type = <{access|service}>
Privilege type.
[descr = <quoted string>]
Privilege description.
mlp privilege addzone
Add a zone to a privilege.
Syntax : addzone name = <>
zone = <{Read/LAN/WAN/Local|Write/LAN/WAN/Local|r_lan|r_wan|
r_fs_view|r_fs_retrieve|r_rtg|r_fwdg|r_nat|r_frwl|
r_ipsec_norm|r_ipsec_adv|r_certificates|r_remote_mgnt|
r_local|r_qos|w_lan|w_wan|w_fs_passive|w_rtg|w_fwdg|
w_nat|w_frwl_norm|w_frwl_adv|w_frwl_ss|w_ipsec|
w_certificates|w_remote_mgnt|w_local|w_qos|SND_lan|
SND_wan|SND_local|AND_lan|AND_wan|AND_frwl|AND_local|
User_Admin|MLP_Admin|secure_ipsec_term|secure_BR|CLI|
CGI|FTP|MDAP|secure_reset|GUI_advanced|mbus|Websev|
unsecure_connection|Sensitve_file|channel_ftp|
channel_telnet|channel_http|channel_mdap|
channel_serial|origin_lan|origin_wan|origin_local|
trace}>

Parameters :
name = <>
Privilege name.
zone = <{Read/LAN/WAN/Local|Write/LAN/WAN/Local|r_lan|r_wan|r_fs_view|
r_fs_retrieve|r_rtg|r_fwdg|r_nat|r_frwl|r_ipsec_norm|r_ipsec_adv|
r_certificates|r_remote_mgnt|r_local|r_qos|w_lan|w_wan|w_fs_passive|
w_rtg|w_fwdg|w_nat|w_frwl_norm|w_frwl_adv|w_frwl_ss|w_ipsec|
w_certificates|w_remote_mgnt|w_local|w_qos|SND_lan|SND_wan|SND_local|
AND_lan|AND_wan|AND_frwl|AND_local|User_Admin|MLP_Admin|
secure_ipsec_term|secure_BR|CLI|CGI|FTP|MDAP|secure_reset|
GUI_advanced|mbus|Websev|unsecure_connection|Sensitve_file|
channel_ftp|channel_telnet|channel_http|channel_mdap|channel_serial|
origin_lan|origin_wan|origin_local|trace}>
Zone name.
mlp privilege config
Modify the privilege.
Syntax : config name = <> [descr = <quoted string>]
[score = <{hex-word}[:{hex-word}] ex: 'a12:c30f'>]

Parameters :
name = <>
Select the privilege by name.
[descr = <quoted string>]
Set the description.
[score = <{hex-word}[:{hex-word}] ex: 'a12:c30f'>]
Set the score.
mlp privilege delete
Delete a privilege.
Syntax : delete name = <>

Parameters :
name = <>
Privilege name.
mlp privilege list
Display the privileges.
Syntax : list [name = <>] [type = <{access|service}>]
[verbose = <{minimal|medium|all}>]

Parameters :
[name = <>]
Privilege name.
[type = <{access|service}>]
Privilege type.
[verbose = <{minimal|medium|all}>]
Limit the output list.
mlp privilege removezone
Remove a zone from a privilege.
Syntax : removezone name = <>
zone = <{Read/LAN/WAN/Local|Write/LAN/WAN/Local|r_lan|
r_wan|r_fs_view|r_fs_retrieve|r_rtg|r_fwdg|r_nat|
r_frwl|r_ipsec_norm|r_ipsec_adv|r_certificates|
r_remote_mgnt|r_local|r_qos|w_lan|w_wan|
w_fs_passive|w_rtg|w_fwdg|w_nat|w_frwl_norm|
w_frwl_adv|w_frwl_ss|w_ipsec|w_certificates|
w_remote_mgnt|w_local|w_qos|SND_lan|SND_wan|
SND_local|AND_lan|AND_wan|AND_frwl|AND_local|
User_Admin|MLP_Admin|secure_ipsec_term|secure_BR|
CLI|CGI|FTP|MDAP|secure_reset|GUI_advanced|mbus|
Websev|unsecure_connection|Sensitve_file|
channel_ftp|channel_telnet|channel_http|
channel_mdap|channel_serial|origin_lan|origin_wan|
origin_local|trace}>

add : Add a role.

delete : Delete a role.
addpriv : Add a privilege.
removepriv : Remove a privilege.
list : Display the roles.
config : Modify the role.
mlp role add
Add a role.
Syntax : add name = <string> parent = <> [descr = <quoted string>]

Parameters :
name = <string>
Role name.
parent = <>
Parent role name.
[descr = <quoted string>]
Role description.
mlp role addpriv
Add a privilege.
Syntax : addpriv name = <> access = <>
service = <{anyservice|SP1|SP10|SP11|SP12|SP13|SP14|SP15|SP16|
SP17|SP18|SP19|SP2|SP21|SP22|SP23|SP24|SP25|SP3|SP4|
SP5|SP6|SP7|SP8|SP9}>

Parameters :
name = <{Administrator|LAN_Admin|PowerUser|root|SuperUser|TechnicalSupport|
User|WAN_Admin|WebsevUser}>
Role name.
access = <{anyaccess|AP1|AP2|AP3|AP4|AP5|AP6|AP7|AP8|AP9}>
Access privilege to add.
service = <{anyservice|SP1|SP10|SP11|SP12|SP13|SP14|SP15|SP16|SP17|SP18|
SP19|SP2|SP21|SP22|SP23|SP24|SP25|SP3|SP4|SP5|SP6|SP7|SP8|SP9}>
Privilege name to add.
mlp role config
Modify the role.
Syntax : config name = <{Administrator|LAN_Admin|PowerUser|root|SuperUser|
TechnicalSupport|User|WAN_Admin|WebsevUser}>
[parent = <{Administrator|LAN_Admin|PowerUser|root|SuperUser|
TechnicalSupport|User|WAN_Admin|WebsevUser}>]
[descr = <quoted string>]

Parameters :
name = <>
Role name.
[parent = <>]
Parent role name.
[descr = <quoted string>]
Role description.
mlp role delete
Delete a role.
Syntax : delete name = <>

Parameters :
name = <>
Role name.
mlp role list
Display the roles.
Syntax : list [name = <>] [verbose = <{minimal|medium|all}>]

Parameters :
[name = <>]
Role name.
[verbose = <{minimal|medium|all}>]
Limit the output list.
mlp role removepriv
Remove a privilege.
Syntax : removepriv name = <> access = <> [service = <>]

Parameters :
name = <>
Role name.
access = <>
Access privilege to delete.
[service = <>]
Privilege name to delete.
[HIDDEN]mlp zone
Following commands are available :

add : Add a zone.

delete : Delete a zone.
list : Display zones.
config : Modify a zone.
configintfgroup : Modify interfacegroup zone numbers.
configchannels : Modify channel zone numbers.
configorigin : Modify origin zone numbers.
configsecconn : Modify secure connection zone number.
configsecfile : Modify secure files zone number.
configtrace : Modify trace zone number.
mlp zone add
Add a zone.
Syntax : add zonenr = <number> name = <string> [descr = <quoted string>]

Parameters :
zonenr = <number>
Zone number
name = <string>
Zone name
[descr = <quoted string>]
Zone description
mlp zone config
Modify a zone.
Syntax : config zonenr = <number> [name = <string>] [descr = <quoted string>]

Parameters :
zonenr = <number>
Zone number
[name = <string>]
Zone name
[descr = <quoted string>]
Zone description
mlp zone configchannels
Modify channel zone numbers.
Syntax : configchannels [ftp = <number>] [telnet = <number>]
[http = <number>] [mdap = <number>]
[serial = <number>]

Parameters :
[ftp = <number>]
Ftp application zone number
[telnet = <number>]
Telnet application zone number
[http = <number>]
Http application zone number
[mdap = <number>]
Mdap application zone number
[serial = <number>]
Serial application zone number
mlp zone configintfgroup
Modify interfacegroup zone numbers.
Syntax : configintfgroup [rw = <{read|write}>] [target = <number>]
[lan = <number>] [wan = <number>] [local = <number>]

Parameters :
[rw = <{read|write}>]
Read/write config action
[target = <number>]
Target dynamic zone number
[lan = <number>]
Lan zone number
[wan = <number>]
Wan zone number
[local = <number>]
Local zone number
mlp zone configorigin
Modify origin zone numbers.
Syntax : configorigin [lan = <number>] [wan = <number>] [local = <number>]

Parameters :
[lan = <number>]
Lan origin zone number
[wan = <number>]
Wan origin zone number
[local = <number>]
Local origin zone number
mlp zone configsecconn
Modify secure connection zone number.
Syntax : configsecconn [zonenr = <number>]

Parameters :
[zonenr = <number>]
Secure connection zone number
mlp zone configsecfile
Modify secure files zone number.
Syntax : configsecfile [zonenr = <number>]

Parameters :
[zonenr = <number>]
Secure files zone number
mlp zone configtrace
Modify trace zone number.
Syntax : configtrace [zonenr = <number>]

Parameters :
[zonenr = <number>]
Trace zone number
mlp zone delete
Delete a zone.
Syntax : delete name = <>

Parameters :
name = <>
Zone name
mlp zone list
Display zones.
Syntax : list
mobile
Following commands are available :

ifadd : Create a new Mobile interface.

ifdelete : Delete an Mobile interface.
ifconfig : Configure an Mobile interface.
ifattach : Attach an Mobile interface.
ifdetach : Detach an Mobile interface.
iflist : Display the Mobile interfaces.
simcard : Get a state of the SIM card.

Following command groups are available :

debug device
mobile debug
Following commands are available :

operator : Shows the currently selected operator.

showsq : Shows signal quality (RSSI & BER).
sendat : Send AT command to the modem card.
traceconfig : Modify trace configuration
mobile debug operator
Shows the currently selected operator.
Syntax : operator [list = <{current|all}>]

Parameters :
[list = <{current|all}>]
List only the current or all
mobile debug sendat
Send AT command to the modem card.
Syntax : sendat command = <quoted string>

Parameters :
command = <quoted string>
AT command
mobile debug showsq
Shows signal quality (RSSI & BER).
Syntax : showsq
mobile debug traceconfig
Modify trace configuration
Syntax : traceconfig [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/disable tracing.
mobile device
Following commands are available :

list : List mobile devices

[HIDDEN]mobile device add
Add a mobile device
Syntax : add name = <quoted string> [storagevid = <string>]
[storagepid = <string>] modemvid = <string> modempid = <string>
[modeswitchparam = <quoted string>]
atinterface = <{auto|0|1|2|3|4|5|6|7|8|9|operator|Shows the
currently selected operator.||<#}>
datainterface = <{auto|0|1|2|3|4|5|6|7|8|9|operator|Shows the
currently selected operator.||<#}>
[forceusb11 = <{yes|no}>]

Parameters :
name = <quoted string>
Name
[storagevid = <string>]
Storage VID (hex)
[storagepid = <string>]
Storage PID (hex)
modemvid = <string>
Modem VID (hex)
modempid = <string>
Modem PID (hex)
[modeswitchparam = <quoted string>]
Modeswitch parameters
atinterface = <{auto|0|1|2|3|4|5|6|7|8|9|operator|Shows the currently
selected operator.||<#}>
AT Port USB Interface
datainterface = <{auto|0|1|2|3|4|5|6|7|8|9|operator|Shows the currently
selected operator.||<#}>
DATA Port USB Interface
[forceusb11 = <{yes|no}>]
Force USB 1.1
[HIDDEN]mobile device delete
Delete a mobile device
Syntax : delete name = <quoted string>

Parameters :
name = <quoted string>
Name
mobile device list
List mobile devices
Syntax : list
mobile ifadd
Create a new Mobile interface.
Syntax : ifadd intf = <string>

Parameters :
intf = <string>
The name of the new mobile interface
mobile ifattach
Attach an Mobile interface.
Syntax : ifattach intf = <>

Parameters :
intf = <>
The name of the Mobile interface.
mobile ifconfig
Configure an Mobile interface.
Syntax : ifconfig intf = <> [pin = <password>] [puk = <string>]
[apn = <string>] [mode = <{automatic|manual}>]
[operator = <number{0-99999}>] [technology = <{2G|3G}>]
[initcommand = <string>]

Parameters :
intf = <>
The name of the Mobile interface to configure.
[pin = <password>]
PIN code.
[puk = <string>]
PUK code.
[apn = <string>]
Access Point Name.
[mode = <{automatic|manual}>]
Operator selection ( automatic, manual).
[operator = <number{0-99999}>]
Location area indentifier + network code.
[technology = <{2G|3G}>]
Radio access technology ( 2G, 3G).
[initcommand = <string>]
AT command executed after SIM verification.
mobile ifdelete
Delete an Mobile interface.
Syntax : ifdelete intf = <>

Parameters :
intf = <>
The name of the Mobile interface.
mobile ifdetach
Detach an Mobile interface.
Syntax : ifdetach intf = <>

Parameters :
intf = <>
The name of the Mobile interface.
mobile iflist
Display the Mobile interfaces.
Syntax : iflist [intf = <>]

Parameters :
[intf = <>]
The name of the Mobile interface.
mobile simcard
Get a state of the SIM card.
Syntax : simcard
nat
Following commands are available :

ifconfig : Modify address translation on an IP interface.

iflist : Display all interfaces.
mapadd : Add an address mapping to a nat enabled interface.
mapdelete : Delete an address mapping from a nat enabled interface.
maplist : Display address mappings.
tmpladd : Add an address mapping template.
tmpldelete : Delete an address mapping template.
tmpllist : Display address mapping templates.
tmplinst : Instantiate address mapping templates for a given dynamic
address.
config : Modify global NAT configuration.
flush : Flush current NAT configuration.
nat config
Modify global NAT configuration.
Syntax : config [trace = <{disabled|enabled}>]
[randomports = <{disabled|enabled}>]

Parameters :
[trace = <{disabled|enabled}>]
Enable/disable traces.
[randomports = <{disabled|enabled}>]
Enable/disable randomization of port translations.
nat flush
Flush current NAT configuration.
Syntax : flush
nat ifconfig
Modify address translation on an IP interface.
Syntax : ifconfig intf = <{loop|Internet|LocalNetwork}>
translation = <{disabled|enabled|transparent}>

Parameters :
intf = <{loop|Internet|LocalNetwork}>
The IP interface name.
translation = <{disabled|enabled|transparent}>
Disabled, enabled or tranparent address translation.
nat iflist
Display all interfaces.
Syntax : iflist
nat mapadd
Add an address mapping to a nat enabled interface.
Syntax : mapadd intf = <{loop|Internet|LocalNetwork}> [type = <{napt|nat}>]
[outside_addr = <ip-range>] [inside_addr = <ip-range>]
[access_list = <ip-range>] [foreign_addr = <ip-range>]
[protocol = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|
tcp|udp|vines|xns-idp|6to4|ipip} or number>]
[outside_port = <port-range>] [inside_port = <port-range>]
[mode = <{auto|inbound|outbound}>] [weight = <number{0-255}>]
[status = <{up|down}>]

Parameters :
intf = <{loop|Internet|LocalNetwork}>
The IP interface name.
[type = <{napt|nat}>]
The type of mapping.
[outside_addr = <ip-range>]
The outside (typically public) IP address (range for NAT).
[inside_addr = <ip-range>]
The inside (typically private) IP address (range for NAT).
[access_list = <ip-range>]
The range of inside addresses the mapping is restricted to.
[foreign_addr = <ip-range>]
The range of destination addresses the mapping is restricted to.
[protocol = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|tcp|udp|vines|
xns-idp|6to4|ipip} or number>]
The IP protocol.
[outside_port = <port-range>]
The outside port number or range (only for NAPT).
[inside_port = <port-range>]
The inside port number or range (only for NAPT).
[mode = <{auto|inbound|outbound}>]
The mode to create the portmap.
[weight = <number{0-255}>]
The weight for the portmap.
[status = <{up|down}>]
The administrative state of mapping.
[inbound = <{(HIDDEN)}>]
(HIDDEN)
nat mapdelete
Delete an address mapping from a nat enabled interface.
Syntax : mapdelete intf = <{loop|Internet|LocalNetwork}> index = <number>

Parameters :
intf = <{loop|Internet|LocalNetwork}>
The IP interface name.
index = <number>
The map index as listed by ':nat maplist'.
nat maplist
Display address mappings.
Syntax : maplist [intf = <{loop|Internet|LocalNetwork}>]
[expand = <{disabled|enabled}>]

Parameters :
[intf = <{loop|Internet|LocalNetwork}>]
The IP interface name.
[expand = <{disabled|enabled}>]
Expanded listing.
[sort_s = <{(HIDDEN)}>]
(HIDDEN)
nat tmpladd
Add an address mapping template.
Syntax : tmpladd [intf = <{loop|Internet|LocalNetwork}>]
[group = <{wan|local|lan|tunnel|dmz|guest} or number>]
[timeout = <number{0-65535}>] [type = <{napt|nat}>]
outside_addr = <ip-range> [inside_addr = <ip-range>]
[access_list = <ip-range>] [foreign_addr = <ip-range>]
[protocol = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|
tcp|udp|vines|xns-idp|6to4|ipip} or number>]
[outside_port = <port-range>] [inside_port = <port-range>]
[mode = <{auto|inbound|outbound}>]
[weight = <number{0-255}>] [status = <{up|down}>]

Parameters :
[intf = <{loop|Internet|LocalNetwork}>]
The IP interface name scope for this template.
[group = <{wan|local|lan|tunnel|dmz|guest} or number>]
The IP interface group scope for this template.
[timeout = <number{0-65535}>]
Lifetime (seconds) for this template.
[type = <{napt|nat}>]
The type of template.
outside_addr = <ip-range>
The outside (typically public) IP address or index (range for NAT).
[inside_addr = <ip-range>]
The inside (typically private) IP address or index (range for NAT).
[access_list = <ip-range>]
The range of inside addresses the template is restricted to.
[foreign_addr = <ip-range>]
The range of destination addresses the template is restricted to.
[protocol = <{ah|egp|esp|ggp|gre|hmp|icmp|igmp|pup|rdp|rsvp|tcp|udp|vines|
xns-idp|6to4|ipip} or number>]
The IP protocol.
[outside_port = <port-range>]
The outside port number or range (only for NAPT).
[inside_port = <port-range>]
The inside port number or range (only for NAPT).
[mode = <{auto|inbound|outbound}>]
The mode to create the portmap.
[weight = <number{0-255}>]
The weight to be used for the template instance(s).
[status = <{up|down}>]
The administrative state of template.
[inbound = <{(HIDDEN)}>]
(HIDDEN)
nat tmpldelete
Delete an address mapping template.
Syntax : tmpldelete index = <number>

Parameters :
index = <number>
The template index as listed by ':nat tmpllist'.
nat tmplinst
Instantiate address mapping templates for a given dynamic address.
Syntax : tmplinst intf = <{loop|Internet|LocalNetwork}>
addr_index = <ip-address> dynamic_addr = <ip-address>

Parameters :
intf = <{loop|Internet|LocalNetwork}>
The IP interface name.
addr_index = <ip-address>
The outside IP address index/key to instantiate for.
dynamic_addr = <ip-address>
The dynamic address to substitute the index/key with.
nat tmpllist
Display address mapping templates.
Syntax : tmpllist [expand = <{disabled|enabled}>]

Parameters :
[expand = <{disabled|enabled}>]
Expanded listing.
ppp
Following commands are available :

ifadd : Create a new PPP interface.

ifdelete : Delete a PPP interface.
ifattach : Attach a PPP interface.
ifscan : Scan a PPP interface for available interfaces.
ifdetach : Detach a PPP interface.
ifconfig : Modify a PPP interface.
iflist : Display the PPP interfaces.
rtadd : Add a route to the routing table when PPP link comes up.
rtdelete : Delete the route for a PPP link.
flush : Flush all PPP interfaces.

Following command groups are available :

relay
ppp flush
Flush all PPP interfaces.
Syntax : flush
ppp ifadd
Create a new PPP interface.
Syntax : ifadd intf = <string>

Parameters :
intf = <string>
The name for the new PPP interface. If not specified, the destination
will double as interface name.
ppp ifattach
Attach a PPP interface.
Syntax : ifattach intf = <{}>

Parameters :
intf = <{}>
The name of the PPP interface.
ppp ifconfig
Modify a PPP interface.
Syntax : ifconfig intf = <{}> [dest = <{RELAY|eth_DEFAULT|eth_VOIP}>]
[user = <string>] [password = <password>]
[acname = <quoted string>] [servicename = <quoted string>]
[class = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15}>]
[pool = <{none}>] [accomp = <{enabled|disabled|negotiate}>]
[trace = <{disabled|enabled}>]
[concentrator = <{disabled|enabled}>]
[auth = <{pap|chap|auto}>] [restart = <{disabled|enabled}>]
[retryinterval = <number{0-65535}>]
[passive = <{disabled|enabled}>]
[silent = <{disabled|enabled}>]
[echotolerance = <number{1-100}>] [echo = <number>]
[mru = <number{256-1500}>] [laddr = <ip-address>]
[raddr = <ip-address>]
[netmask = <ip-mask(dotted or cidr)>]
[format = <{cidr|dotted|none}>]
[subnetfirstip = <{disabled|enabled}>]
[savepwd = <{disabled|enabled}>]
[demanddial = <{disabled|enabled}>]
[doddelay = <number{0-3600}>] [primdns = <ip-address>]
[secdns = <ip-address>] [dnsmetric = <number{0-100}>]
[idletime = <number{0-1000000}>]
[idletrigger = <{RxTx|Rx|Tx}>]
[unnumbered = <{disabled|enabled}>]

Parameters :
intf = <{}>
The name of the PPP interface to configure.
[dest = <{RELAY|eth_DEFAULT|eth_VOIP}>]
The destination interface for this PPP interface.
[user = <string>]
The username for remote PAP/CHAP authentication.
[password = <password>]
The password for remote PAP/CHAP authentication.
[acname = <quoted string>]
The access concentrator name for a PPP session.
[servicename = <quoted string>]
The service name for a PPP session.
[class = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15}>]
The prio class of the PPP packets.
[pool = <{none}>]
Acquire IP subnet and assign it to a free DHCP pool.
[accomp = <{enabled|disabled|negotiate}>]
Try to negotiate PPP address & control field compression (LCP ACCOMP).
[trace = <{disabled|enabled}>]
Enable verbose console logging.
[concentrator = <{disabled|enabled}>]
The access concentrator is on this side of the PPP connection.
[auth = <{pap|chap|auto}>]
Authentication protocol to be used.
[restart = <{disabled|enabled}>]
Automatically restart when LCP link goes down.
[retryinterval = <number{0-65535}>]
The number of seconds between retries.
[passive = <{disabled|enabled}>]
When LCP times out, put link in a listening state.
[silent = <{disabled|enabled}>]
Do not send anything at startup, just listen for incoming LCP messages.
[echotolerance = <number{1-100}>]
Number of failed LCP echo requests needed to trigger a link failure.
[echo = <number>]
LCP echo request interval.
[mru = <number{256-1500}>]
Negotiate maximum packet size we can handle.
[laddr = <ip-address>]
Negotiate this IP address at our side of the link.
[raddr = <ip-address>]
Negotiate this IP address at remote side of the link.
[netmask = <ip-mask(dotted or cidr)>]
Negotiate IP subnet mask at remote side of the link.
[format = <{cidr|dotted|none}>]
The format used to represent the IP subnet.
[subnetfirstip = <{disabled|enabled}>]
Take the first ip address out of the received IP as local address.
[savepwd = <{disabled|enabled}>]
Select whether or not password is saved.
[demanddial = <{disabled|enabled}>]
Enable dial-on-demand feature. Nothing happens until packets are sent to
this PPP interface.
[doddelay = <number{0-3600}>]
During this initial interval (seconds) packets do not trigger PPP
interface.
[primdns = <ip-address>]
Negotiate this IP address as primary DNS server.
[secdns = <ip-address>]
Negotiate this IP address as secondary DNS server.
[dnsmetric = <number{0-100}>]
DNS route metric to be used for the negotiated DNS servers.
[idletime = <number{0-1000000}>]
Maximum time the link may be idle (seconds).
[idletrigger = <{RxTx|Rx|Tx}>]
Consider the link being idle if no traffic is sent and/or received during
the idle time.
[unnumbered = <{disabled|enabled}>]
Take local IP address from 'laddr' field and remote IP address from the
pool. SVC only.
[pcomp = <{(HIDDEN)}>]
(HIDDEN)
[poolstart = <{(HIDDEN)}>]
(HIDDEN)
[poolend = <{(HIDDEN)}>]
(HIDDEN)
[status = <{(HIDDEN)}>]
(HIDDEN)
ppp ifdelete
Delete a PPP interface.
Syntax : ifdelete intf = <{Internet}>

Parameters :
intf = <{Internet}>
The name of the PPP interface.
ppp ifdetach
Detach a PPP interface.
Syntax : ifdetach intf = <{Internet}>

Parameters :
intf = <{Internet}>
The name of the PPP interface.
ppp iflist
Display the PPP interfaces.
Syntax : iflist [intf = <{Internet}>]

Parameters :
[intf = <{Internet}>]
The name of a PPP interface.
ppp ifscan
Scan a PPP interface for available interfaces.
Syntax : ifscan intf = <{Internet}> [time = <number{0-36000}>]

Parameters :
intf = <{Internet}>
The name of the PPP interface to scan.
[time = <number{0-36000}>]
The time to scan for services (in seconds).
ppp relay
Following commands are available :

ifadd : Add an ethernet interface to the PPP relay list.

ifdelete : Delete an ethernet interface from the PPP relay agent list.
ifconfig : Modify an ethernet interface from the PPP relay agent list.
iflist : Display all ethernet interfaces added to the PPP relay
agent list.
sesslist : Display all active PPP relay sessions.
flush : Remove all ethernet interfaces from the PPP relay agent
list and terminate all sessions.
ppp relay flush
Remove all ethernet interfaces from the PPP relay agent list and terminate all
sessions.
Syntax : flush
ppp relay ifadd
Add an ethernet interface to the PPP relay list.
Syntax : ifadd intf = <{eth_DEFAULT|eth_VOIP}>

Parameters :
intf = <{eth_DEFAULT|eth_VOIP}>
The ethernet intf to be added to the PPP relay agent list.
ppp relay ifconfig
Modify an ethernet interface from the PPP relay agent list.
Syntax : ifconfig intf = <{bridge|eth_WAN}> hwaddr = <hardware-address>

Parameters :
intf = <{bridge|eth_WAN}>
The ethernet intf to be added to the PPP relay agent list.
hwaddr = <hardware-address>
The hardware address (e.g. Ethernet MAC address) of this interface.
ppp relay ifdelete
Delete an ethernet interface from the PPP relay agent list.
Syntax : ifdelete intf = <{bridge|eth_WAN}>

Parameters :
intf = <{bridge|eth_WAN}>
The ethernet intf to be added to the PPP relay agent list.
ppp relay iflist
Display all ethernet interfaces added to the PPP relay agent list.
Syntax : iflist
ppp relay sesslist
Display all active PPP relay sessions.
Syntax : sesslist
ppp rtadd
Add a route to the routing table when PPP link comes up.
Syntax : rtadd intf = <{Internet}> dst = <ip-address>
[dstmsk = <ip-mask(dotted or cidr)>]
[label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|
Video|VoIP-RTP|VoIP-Signal|default|voice-only}>]
[src = <ip-address>] [srcmsk = <ip-mask(dotted or cidr)>]
[metric = <number{0-100}>]

Parameters :
intf = <{Internet}>
The name of a PPP interface.
dst = <ip-address>
The IP destination address specification for the route to be added when
the link comes up.
[dstmsk = <ip-mask(dotted or cidr)>]
The IP destination mask. Special values : 1 = remote net; 32 = remote
host;
[label = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-
RTP|VoIP-Signal|default|voice-only}>]
The name of the label.
[src = <ip-address>]
The IP source address specification. i.e. who can use this link.
[srcmsk = <ip-mask(dotted or cidr)>]
The IP source mask.
[metric = <number{0-100}>]
The route metric.
ppp rtdelete
Delete the route for a PPP link.
Syntax : rtdelete intf = <{Internet}>

Parameters :
intf = <{Internet}>
The PPP interface name for which to delete the route settings.
[HIDDEN]ppp simlock
Show allowed list
Syntax : simlock

Parameters :
[list = <{(HIDDEN)}>]
(HIDDEN)
pptp
Following commands are available :

list : Shows PPTP configuration.

profadd : Defines a new PPTP profile.
profdelete : Deletes a PPTP profile.
proflist : Lists PPTP profiles.
flush : Flushes the PPTP configuration.
ifadd : Adds a PPTP profile (backwards compatible with previous
release, use profiles instead).
pptp flush
Flushes the PPTP configuration.
Syntax : flush
pptp ifadd
Adds a PPTP profile (backwards compatible with previous release, use profiles
instead).
Syntax : ifadd dest = <string> [rate = <number{10-10000}>]
[encaps = <{vcmux|nlpid}>] [ac = <{never|always|keep}>]

Parameters :
dest = <string>
The WAN destination for this PPTP tunnel. Typically a phonebook name.
[rate = <number{10-10000}>]
Transmit speed in kbits/s for the WAN link.
[encaps = <{vcmux|nlpid}>]
The WAN protocol encapsulation.
[ac = <{never|always|keep}>]
Enable/disable sending address and control field (0xFF03) on the WAN
link.
pptp list
Shows PPTP configuration.
Syntax : list
pptp profadd
Defines a new PPTP profile.
Syntax : profadd name = <string> [qos = <}>] [encaps = <{vcmux|nlpid}>]
[ac = <{never|always|keep}>]

Parameters :
name = <string>
The name for the new PPTP profile.
[qos = <}>]
The name of the qosbook entry, containing the settings for this profile.
[encaps = <{vcmux|nlpid}>]
The WAN protocol encapsulation to be used with this profile.
[ac = <{never|always|keep}>]
Enable/disable sending address and control field (0xFF03) on the WAN
link.
pptp profdelete
Deletes a PPTP profile.
Syntax : profdelete name = <>

Parameters :
name = <>
The name of the profile to delete.
pptp proflist
Lists PPTP profiles.
Syntax : proflist
printersharing
Following command groups are available :

LPD
printersharing LPD
Following commands are available :

config : To enable/disable LPD service.

list : To display LPD service context.

Following command groups are available :

queue
printersharing LPD config
To enable/disable LPD service.
Syntax : config [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enabled/disabled LPD printer service.
printersharing LPD list
To display LPD service context.
Syntax : list
printersharing LPD queue
Following commands are available :

add : Add an option.

delete : Delete an option.
list : List all options.
printersharing LPD queue add
Add an option.
Syntax : add name = <string> [type = <{Feed|Raw}>] [default = <{no|yes}>]

Parameters :
name = <string>
LPD queue name.
[type = <{Feed|Raw}>]
Queue Type
[default = <{no|yes}>]
Set default queue
printersharing LPD queue delete
Delete an option.
Syntax : delete name = <string>

Parameters :
name = <string>
LPD queue name.
printersharing LPD queue list
List all options.
Syntax : list
ptrace
Following commands are available :

add : Add a filter/action pair (=rule)

delete : Delete a rule
flush : Flush all settings
list : List all rules
modify : Modify a rule

Following command groups are available :

action debug filter

ptrace action
Following commands are available :

add : Add an action

delete : Delete an action
list : List all actions
modify : Modify an action
ptrace action add
Add an action
Syntax : add name = <string>

Parameters :
name = <string>
Action name
ptrace action delete
Delete an action
Syntax : delete name = <>

Parameters :
name = <>
Action name
ptrace action list
List all actions
Syntax : list
ptrace action modify
Modify an action
Syntax : modify name = <> type = <{dump|mirror|}> intf = <{}> len = <number>

Parameters :
name = <>
Action name
type = <{dump|mirror|}>
Action type
intf = <{}>
Device on which to mirror frames
len = <number>
Nbr of bytes to dump
ptrace add
Add a filter/action pair (=rule)
Syntax : add name = <string> filter = <> action = <>

Parameters :
name = <string>
Rule name
filter = <>
Filter
action = <>
Action
ptrace debug
Following commands are available :

traceconfig : Modify trace configuration

ptrace debug traceconfig
Modify trace configuration
Syntax : traceconfig [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable tracing.
ptrace delete
Delete a rule
Syntax : delete name = <>

Parameters :
name = <>
Rule name
ptrace filter
Following commands are available :

add : Add a filter

delete : Delete a filter
list : List all filters
modify : Modify a filter
ptrace filter add
Add a filter
Syntax : add name = <string>

Parameters :
name = <string>
Filter name
ptrace filter delete
Delete a filter
Syntax : delete name = <>

Parameters :
name = <>
Filter name
ptrace filter list
List all filters
Syntax : list
ptrace filter modify
Modify a filter
Syntax : modify name = <>
intf = <{bridge|OBC|ethport1|RELAY|ethport2|ethport3|ethport4|
WLAN|virt|eth_DEFAULT|eth_WAN|eth_VOIP}>

Parameters :
name = <>
Filter name
intf = <{bridge|OBC|ethport1|RELAY|ethport2|ethport3|ethport4|WLAN|virt|
eth_DEFAULT|eth_WAN|eth_VOIP}>
Interface on which to trace frames
ptrace flush
Flush all settings
Syntax : flush
ptrace list
List all rules
Syntax : list
ptrace modify
Modify a rule
Syntax : modify name = <> [state = <{disabled|enabled}>]

Parameters :
name = <>
Rule name
[state = <{disabled|enabled}>]
Rule enable/disable
pwr
Following commands are available :

config : Modify/Display ECO-manager configuration

wlan-pwr-options : Modify/Display the WLAN power control options

Following command groups are available :

debug
pwr config
Modify/Display ECO-manager configuration
Syntax : config [eco-manager = <{disabled|enabled}>]
[cpu-microsleep = <{disabled|enabled}>]
[cpu-lowspeed = <{disabled|enabled}>]
[usb-controller = <{disabled|enabled}>]
[wlan-pwrcontrol = <{disabled|enabled}>]
[eth-phy = <{disabled|enabled}>]

Parameters :
[eco-manager = <{disabled|enabled}>]
(Enables / Disables the ECO-manager).
[cpu-microsleep = <{disabled|enabled}>]
(Allows the CPU to use low power instructions).
[cpu-lowspeed = <{disabled|enabled}>]
(Allows the CPU to adjust its internal clock).
[usb-controller = <{disabled|enabled}>]
(Enables / Disables the USB-Controller)
[wlan-pwrcontrol = <{disabled|enabled}>]
(Enables / Disables Wireless LAN (WLAN) power control).
[eth-phy = <{disabled|enabled}>]
(Enables / Disables the Ethernet Phy power control)
pwr debug
Following commands are available :

traceconfig : Enable/disable the ECO manager traces

pwr debug traceconfig
Enable/disable the ECO manager traces
Syntax : traceconfig [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
enable/disable the ECO manager traces
pwr wlan-pwr-options
Modify/Display the WLAN power control options
Syntax : wlan-pwr-options [t-on = <number{1-600}>] [t-off = <number{1-600}>]
[t-ext = <number{1-600}>]
[slow-radio-toggle = <{disabled|enabled}>]
[fast-radio-toggle = <{disabled|enabled}>]
[single-rxchain = <{disabled|enabled}>]

Parameters :
[t-on = <number{1-600}>]
Slow toggle on-time (s)
[t-off = <number{1-600}>]
Slow toggle off-time(s)
[t-ext = <number{1-600}>]
Slow toggle on-time Extension (s)
[slow-radio-toggle = <{disabled|enabled}>]
Slow toggle of radio state
[fast-radio-toggle = <{disabled|enabled}>]
Fast toggle of radio state
[single-rxchain = <{disabled|enabled}>]
Use single rx chain
script
Following commands are available :

add : Add line to script.

delete : Delete complete script or line from script.
list : List script.
flush : Flush scripts.
run : Run script.
script add
Add line to script.
Syntax : add name = <string> [index = <number>] command = <quoted string>

Parameters :
name = <string>
Name of script.
[index = <number>]
Line number (0 = add).
command = <quoted string>
Command.
script delete
Delete complete script or line from script.
Syntax : delete name = <{}> [index = <number>]

Parameters :
name = <{}>
Name of script.
[index = <number>]
Line number.
script flush
Flush scripts.
Syntax : flush
script list
List script.
Syntax : list [name = <{}>]

Parameters :
[name = <{}>]
Name of script.
script run
Run script.
Syntax : run name = <{}> pars = <quoted string>

Parameters :
name = <{}>
Name of script.
pars = <quoted string>
Parameters separated with comma e.q. a,b,c .
[HIDDEN]script trace
Trace toggle.
Syntax : trace
service
Following command groups are available :

host system
service host
Following commands are available :

list : Display list of services.

add : Add a service.
delete : Delete a service.
assign : Assign a service to a host.
disable : Disable a service.
stats : Service statistics.
triggerlist : List all triggers.
flush : Flush all services.

Following command groups are available :

category rule
service host add
Add a service.
Syntax : add name = <quoted string> [mode = <{server|client|custom}>]
[category = <>]

Parameters :
name = <quoted string>
The name of the service.
[mode = <{server|client|custom}>]
server, client or custom service ?
[category = <>]
The category to which the service belongs.
service host assign
Assign a service to a host.
Syntax : assign name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN|
Counter Strike|DirectX 7|DirectX 8|DirectX 9|eMule|FTP
Server|Gamespy Arcade|HTTP Server (World Wide Web)|
HTTPS Server|iMesh|KaZaA|Mail Server (SMTP)|Microsoft
Remote Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP
Server|PPTP Server|Secure Shell Server (SSH)|Steam
Games|Telnet Server|VNC|Xbox Live}>
[host = <ip-address>] [log = <{disabled|enabled}>]

add : Create/define service category.

delete : Delete a service category.
rename : Rename a service category.
list : List the available service categories.
service host category add
Create/define service category.
Syntax : add name = <string>

Parameters :
name = <string>
The name of the category.
service host category delete
Delete a service category.
Syntax : delete name = <>

Parameters :
name = <>
The name of the category.
service host category list
List the available service categories.
Syntax : list
service host category rename
Rename a service category.
Syntax : rename name = <> new_name = <string>

Parameters :
name = <>
The name of the existing category.
new_name = <string>
The new name of the category.
[HIDDEN]service host config
Modify/Display global service configuration options.
Syntax : config [trace = <{disabled|enabled}>]

Parameters :
[trace = <{disabled|enabled}>]
Enable/disable traces.
service host delete
Delete a service.
Syntax : delete name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN|
Counter Strike|DirectX 7|DirectX 8|DirectX 9|eMule|FTP
Server|Gamespy Arcade|HTTP Server (World Wide Web)|
HTTPS Server|iMesh|KaZaA|Mail Server (SMTP)|Microsoft
Remote Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP
Server|PPTP Server|Secure Shell Server (SSH)|Steam
Games|Telnet Server|VNC|Xbox Live}>

Parameters :
[name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN|Counter Strike|
DirectX 7|DirectX 8|DirectX 9|eMule|FTP Server|Gamespy Arcade|HTTP
Server (World Wide Web)|HTTPS Server|iMesh|KaZaA|Mail Server (SMTP)|
Microsoft Remote Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP
Server|PPTP Server|Secure Shell Server (SSH)|Steam Games|Telnet
Server|VNC|Xbox Live}>]
The name of the service.
service host flush
Flush all services.
Syntax : flush
service host list
Display list of services.
Syntax : list [name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN|
Counter Strike|DirectX 7|DirectX 8|DirectX 9|eMule|FTP
Server|Gamespy Arcade|HTTP Server (World Wide Web)|HTTPS
Server|iMesh|KaZaA|Mail Server (SMTP)|Microsoft Remote
Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP Server|
PPTP Server|Secure Shell Server (SSH)|Steam Games|Telnet
Server|VNC|Xbox Live}>]

add : Create/define service portmap.

delete : Delete a service portmap.
service host rule add
Create/define service portmap.
Syntax : add name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN|Counter
Strike|DirectX 7|DirectX 8|DirectX 9|eMule|FTP Server|
Gamespy Arcade|HTTP Server (World Wide Web)|HTTPS Server|
iMesh|KaZaA|Mail Server (SMTP)|Microsoft Remote Desktop|
MSN Game Zone|MSN Game Zone (DX)|NNTP Server|PPTP Server|
Secure Shell Server (SSH)|Steam Games|Telnet Server|VNC|
Xbox Live}>
[protocol = <{any|tcp|udp}>]
[baseport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|
biff|bootpc|bootps|chargen|clearcase|daytime|discard|
dns|domain|doom|echo|exec|finger|ftp|ftp-data|gopher|
h323|httpproxy|ike|ils|imap2|imap3|ingres-net|
ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-
dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-
rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|
syslog|systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows}
or number>]
portrange = <port-range>
[triggerport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|
biff|bootpc|bootps|chargen|clearcase|daytime|
discard|dns|domain|doom|echo|exec|finger|ftp|ftp-
data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|
login|netbios-dgm|netbios-ns|netbios-ssn|netwall|
netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|
pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|
sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|
telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>]
[triggerprotocol = <{any|tcp|udp}>]
[mode = <{inbound|outbound|auto}>]

Parameters :
name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN|Counter Strike|
DirectX 7|DirectX 8|DirectX 9|eMule|FTP Server|Gamespy Arcade|HTTP
Server (World Wide Web)|HTTPS Server|iMesh|KaZaA|Mail Server (SMTP)|
Microsoft Remote Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP
Server|PPTP Server|Secure Shell Server (SSH)|Steam Games|Telnet
Server|VNC|Xbox Live}>
The name of the service.
[protocol = <{any|tcp|udp}>]
Protocol type.
[baseport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|
exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|
imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|
netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|
nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|
sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|telnet|time|
timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami|
xwindows} or number>]
Inbound base port.
portrange = <port-range>
The outbound portrange.
[triggerport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain|
doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|
ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|
kerberos|ldap|login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|
pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet|rtsp|
sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|
sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or
number>]
Defines outbound trigger port.
[triggerprotocol = <{any|tcp|udp}>]
Protocol of the trigger port.
[mode = <{inbound|outbound|auto}>]
Port map mode.
service host rule delete
Delete a service portmap.
Syntax : delete name = <{AIM Talk|BearShare|BitTorrent|Checkpoint FW1 VPN|
Counter Strike|DirectX 7|DirectX 8|DirectX 9|eMule|FTP
Server|Gamespy Arcade|HTTP Server (World Wide Web)|
HTTPS Server|iMesh|KaZaA|Mail Server (SMTP)|Microsoft
Remote Desktop|MSN Game Zone|MSN Game Zone (DX)|NNTP
Server|PPTP Server|Secure Shell Server (SSH)|Steam
Games|Telnet Server|VNC|Xbox Live}>
[protocol = <{any|tcp|udp}>]
[baseport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|
biff|bootpc|bootps|chargen|clearcase|daytime|
discard|dns|domain|doom|echo|exec|finger|ftp|ftp-
data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|
login|netbios-dgm|netbios-ns|netbios-ssn|netwall|
netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|
pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|
sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|
telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>]
portrange = <port-range>
[triggerport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|
bgp|biff|bootpc|bootps|chargen|clearcase|
daytime|discard|dns|domain|doom|echo|exec|
finger|ftp|ftp-data|gopher|h323|httpproxy|ike|
ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|
irc-u|kerberos|ldap|login|netbios-dgm|netbios-
ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|
nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|
smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|
sqlserv|sunrpc|syslog|systat|talk|telnet|time|
timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who|
www-http|whoami|xwindows} or number>]
[triggerprotocol = <{any|tcp|udp}>]
[mode = <{inbound|outbound|auto}>]

list : Display services.

modify : Modify a service.
mapadd : Add a port map for a service.
mapdelete : Delete a port map for a service.
ifadd : Add an interface to the access list.
ifdelete : Delete an interface from the access list.
ipadd : Add an IP address (range) to the access list.
ipdelete : Delete an IP address (range) from the access list.
[HIDDEN]service system debug
Following commands are available :

stats : Display system service statistics.

service system debug stats
Display system service statistics.
Syntax : stats
service system ifadd
Add an interface to the access list.
Syntax : ifadd name = <{PPTP|HTTP|HTTPs|webservice|FTP|TELNET|RIP-Query|DNS-S|
MDAP|SSDP|PING_RESPONDER}>
[group = <{wan|local|lan|tunnel|dmz|guest} or number>]
[intf = <{loop|Internet|LocalNetwork}>]

Parameters :
name = <{PPTP|HTTP|HTTPs|webservice|FTP|TELNET|RIP-Query|DNS-S|MDAP|SSDP|
PING_RESPONDER}>
The name of the service for this access list.
[group = <{wan|local|lan|tunnel|dmz|guest} or number>]
The interface group for this access list.
[intf = <{loop|Internet|LocalNetwork}>]
The interface for this access list.
service system ifdelete
Delete an interface from the access list.
Syntax : ifdelete name = <{PPTP|HTTP|HTTPs|webservice|FTP|TELNET|RIP-Query|DNS-
S|MDAP|SSDP|PING_RESPONDER}>
[group = <{wan|local|lan|tunnel|dmz|guest} or number>]
[intf = <{loop|Internet|LocalNetwork}>]

Parameters :
name = <{PPTP|HTTP|HTTPs|webservice|FTP|TELNET|RIP-Query|DNS-S|MDAP|SSDP|
PING_RESPONDER}>
The name of the service for this access list.
[group = <{wan|local|lan|tunnel|dmz|guest} or number>]
The interface group for this access list.
[intf = <{loop|Internet|LocalNetwork}>]
The interface for this access list.
service system ipadd
Add an IP address (range) to the access list.
Syntax : ipadd name = <{PPTP|HTTP|HTTPs|webservice|FTP|TELNET|RIP-Query|DNS-S|
MDAP|SSDP|PING_RESPONDER}>
ip = <ip-range>

Parameters :
name = <{PPTP|HTTP|HTTPs|webservice|FTP|TELNET|RIP-Query|DNS-S|MDAP|SSDP|
PING_RESPONDER}>
The name of the service for this access list.
ip = <ip-range>
The IP address (range) for this access list.
service system ipdelete
Delete an IP address (range) from the access list.
Syntax : ipdelete name = <{PPTP|HTTP|HTTPs|webservice|FTP|TELNET|RIP-Query|DNS-
S|MDAP|SSDP|PING_RESPONDER}>
ip = <ip-range>

Parameters :
name = <{PPTP|HTTP|HTTPs|webservice|FTP|TELNET|RIP-Query|DNS-S|MDAP|SSDP|
PING_RESPONDER}>
The name of the service for this access list.
ip = <ip-range>
The IP address (range) for this access list.
service system list
Display services.
Syntax : list [name = <{Remote-MBus|PPTP|PPTPD|PPTPGRE|SNTP|SLA_ICMP_PING|
SLA_UDP_PING|SYSLOG|HTTP|HTTPs|webservice|UPnP-HTTP|
HTTPI|WEBF|TFTP-C|FTP|TELNET|RIP|RIP-Query|IGMP-Proxy|
DNS-S|DNS-C|DYNAMIC_DNS|dyndns|statdns|custom|No-IP|
DtDNS|gnudip|DHCP-S|DHCP-R|MDAP|CWMP-C|CWMP-S|UPGD-C|
SSDP|SIP_SERVER|SIP_SERVER_SIG|SIP_SERVER_RTP|VOIP_SIP|
VOIP_SIP_RTP|VOIP_SIP_SIG|VOIP_SIP_UDP|VOIP_SIP_TCP|
IP_COMMANDS|ICMP_PING|SENDTO|PING_RESPONDER|
ICMP_TRACEROUTE|UDP_TRACEROUTE|HTTPPROBE|
RAD_remoteacces}>]
[expand = <{disabled|enabled}>]
[dynamics = <{disabled|enabled}>]
[members = <{disabled|enabled}>]

Parameters :
[name = <{Remote-MBus|PPTP|PPTPD|PPTPGRE|SNTP|SLA_ICMP_PING|SLA_UDP_PING|
SYSLOG|HTTP|HTTPs|webservice|UPnP-HTTP|HTTPI|WEBF|TFTP-C|FTP|TELNET|
RIP|RIP-Query|IGMP-Proxy|DNS-S|DNS-C|DYNAMIC_DNS|dyndns|statdns|
custom|No-IP|DtDNS|gnudip|DHCP-S|DHCP-R|MDAP|CWMP-C|CWMP-S|UPGD-C|
SSDP|SIP_SERVER|SIP_SERVER_SIG|SIP_SERVER_RTP|VOIP_SIP|VOIP_SIP_RTP|
VOIP_SIP_SIG|VOIP_SIP_UDP|VOIP_SIP_TCP|IP_COMMANDS|ICMP_PING|SENDTO|
PING_RESPONDER|ICMP_TRACEROUTE|UDP_TRACEROUTE|HTTPPROBE|
RAD_remoteacces}>]
The name of the service.
[expand = <{disabled|enabled}>]
Expanded listing.
[dynamics = <{disabled|enabled}>]
Display dynamic sevices.
[members = <{disabled|enabled}>]
Display sevice group members.
service system mapadd
Add a port map for a service.
Syntax : mapadd name = <{PPTP|HTTP|HTTPs|webservice|HTTPI|FTP|TELNET|DNS-S|
MDAP|SSDP}>
intf = <{loop|Internet|LocalNetwork}>
port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|
domain|doom|echo|exec|finger|ftp|ftp-data|gopher|h323|
httpproxy|ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|
irc-o|irc-u|kerberos|ldap|login|netbios-dgm|netbios-ns|
netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|
nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|
sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|
telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-rlogin|
who|www-http|whoami|xwindows} or number>

Parameters :
name = <{PPTP|HTTP|HTTPs|webservice|HTTPI|FTP|TELNET|DNS-S|MDAP|SSDP}>
The name of the service for this map.
intf = <{loop|Internet|LocalNetwork}>
The interface for this map.
port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec|
finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|ingres-
net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-dgm|
netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet|
rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|
syslog|systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>
The port for this map.
service system mapdelete
Delete a port map for a service.
Syntax : mapdelete name = <{PPTP|HTTP|HTTPs|webservice|HTTPI|FTP|TELNET|DNS-S|
MDAP|SSDP}>
intf = <{loop|Internet|LocalNetwork}>
port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|
biff|bootpc|bootps|chargen|clearcase|daytime|discard|
dns|domain|doom|echo|exec|finger|ftp|ftp-data|gopher|
h323|httpproxy|ike|ils|imap2|imap3|ingres-net|
ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|
netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-
ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|
pop2|pop3|printer|qotd|realaudio|rip|rtelnet|rtsp|
sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|
sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|
tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|
whoami|xwindows} or number>

Parameters :
name = <{PPTP|HTTP|HTTPs|webservice|HTTPI|FTP|TELNET|DNS-S|MDAP|SSDP}>
The name of the service for this map.
intf = <{loop|Internet|LocalNetwork}>
The interface for this map.
port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec|
finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|ingres-
net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-dgm|
netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet|
rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|
syslog|systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>
The port for this map.
service system modify
Modify a service.
Syntax : modify name = <{Remote-MBus|PPTP|PPTPD|PPTPGRE|SNTP|SLA_ICMP_PING|
SLA_UDP_PING|SYSLOG|HTTP|HTTPs|webservice|UPnP-HTTP|
HTTPI|WEBF|TFTP-C|FTP|TELNET|RIP|RIP-Query|IGMP-Proxy|
DNS-S|DNS-C|DHCP-S|DHCP-R|MDAP|CWMP-C|CWMP-S|UPGD-C|
SSDP|SIP_SERVER|SIP_SERVER_SIG|SIP_SERVER_RTP|VOIP_SIP|
VOIP_SIP_RTP|VOIP_SIP_SIG|VOIP_SIP_UDP|VOIP_SIP_TCP|
IP_COMMANDS|PING_RESPONDER|RAD_remoteacces}>
[state = <{disabled|enabled}>]
[port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|
biff|bootpc|bootps|chargen|clearcase|daytime|discard|
dns|domain|doom|echo|exec|finger|ftp|ftp-data|gopher|
h323|httpproxy|ike|ils|imap2|imap3|ingres-net|
ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-
dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|
nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|
syslog|systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows}
or number>]
[dynportrange = <port-range>]
[qoslabel = <{None|DSCP|Interactive|Management|SIPS_RTP|
SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default|voice-
only}>]
[routelabel = <{None|DSCP|Interactive|Management|SIPS_RTP|
SIPS_SIG|Video|VoIP-RTP|VoIP-Signal|default|
voice-only}>]
[srcintf <{loop|Internet|LocalNetwork}>]
[log = <{disabled|enabled}>] [forward = <{disabled|enabled}>]
[natpmweight = <number{0-255}>]

Parameters :
name = <{Remote-MBus|PPTP|PPTPD|PPTPGRE|SNTP|SLA_ICMP_PING|SLA_UDP_PING|
SYSLOG|HTTP|HTTPs|webservice|UPnP-HTTP|HTTPI|WEBF|TFTP-C|FTP|TELNET|
RIP|RIP-Query|IGMP-Proxy|DNS-S|DNS-C|DHCP-S|DHCP-R|MDAP|CWMP-C|CWMP-
S|UPGD-C|SSDP|SIP_SERVER|SIP_SERVER_SIG|SIP_SERVER_RTP|VOIP_SIP|
VOIP_SIP_RTP|VOIP_SIP_SIG|VOIP_SIP_UDP|VOIP_SIP_TCP|IP_COMMANDS|
PING_RESPONDER|RAD_remoteacces}>
The name of the service.
[state = <{disabled|enabled}>]
Disable/Enable this service.
[port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec|
finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-
dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|
nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|
sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>]
The port of the service.
[dynportrange = <port-range>]
The dynamic port range for this service.
[qoslabel = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|VoIP-
RTP|VoIP-Signal|default|voice-only}>]
QOS label for service data.
[routelabel = <{None|DSCP|Interactive|Management|SIPS_RTP|SIPS_SIG|Video|
VoIP-RTP|VoIP-Signal|default|voice-only}>]
Route label for service data.
[srcintf <{loop|Internet|LocalNetwork}>]
The primary IP interface for this service.
[log = <{disabled|enabled}>]
Disable/Enable service logging.
[forward = <{disabled|enabled}>]
Disable/Enable service forwarding.
[natpmweight = <number{0-255}>]
The nat portmap weight for this service.
sipserver
Following commands are available :

config : Configure the general parameters

list : Display the general parameters

Following command groups are available :

b2bua debug dns extua inboundauth

intua outbproxy outbreg realm registrar
sipserver b2bua
Following commands are available :

config : Configure B2BUA

list : Display DNS configuration
sipserver b2bua config
Configure B2BUA
Syntax : config [non-invite-handling = <{drop|forward-to-first|startforking}>]

Parameters :
[non-invite-handling = <{drop|forward-to-first|startforking}>]
mode how to deal with NON-invite
sipserver b2bua list
Display DNS configuration
Syntax : list
sipserver config
Configure the general parameters
Syntax : config [areacode = <string>] [maxsessions = <number{1-10}>]
[rtpportrange = <port-range>]
[register-backoff-timer = <number{0-86400}>]
[stopregisteron403 = <{disabled|enabled}>]
[stickyoutbproxy = <{disabled|enabled}>]
[lostbearer-timer = <number{0-60}>]
[p-preferred-id = <{disabled|enabled}>]
[extrareregistrations = <{disabled|enabled}>]
[timert1 = <number{0-1048575}>]
[timert2 = <number{0-1048575}>]
[timertf = <number{0-1048575}>]
[maxsessions-response-outg = <{480|486}>]
[maxsessions-response-inc = <{480|486}>]
[2ndcallfromlocaltoremote = <{allow|reject}>]
[2ndcallfromlocaltoremoteresponse = <{403|480|486|488}>]
[serialhuntdelay = <number{0-600}>]

Parameters :
[areacode = <string>]
The geographical number
[maxsessions = <number{1-10}>]
The maximum number of simultaneous sessions
[rtpportrange = <port-range>]
The RTP port range <[startport]-[endport]>
[register-backoff-timer = <number{0-86400}>]
Fixed backoff timer in registration procedure
[stopregisteron403 = <{disabled|enabled}>]
Stop registration when a 403 is received
[stickyoutbproxy = <{disabled|enabled}>]
Outbound proxy lock over transactions
[lostbearer-timer = <number{0-60}>]
RTP timeout (seconds) before disconnecting the calls
[p-preferred-id = <{disabled|enabled}>]
Put P-Preferred-Id header in outgoing invites
[extrareregistrations = <{disabled|enabled}>]
Reregisters the external UA's if the proxy doesn't respond as expected
[timert1 = <number{0-1048575}>]
Timer T1 time out, defined in rfc 3261
[timert2 = <number{0-1048575}>]
Timer T2 time out
[timertf = <number{0-1048575}>]
Timer F timer out
[maxsessions-response-outg = <{480|486}>]

[maxsessions-response-inc = <{480|486}>]

[2ndcallfromlocaltoremote = <{allow|reject}>]

[2ndcallfromlocaltoremoteresponse = <{403|480|486|488}>]

[serialhuntdelay = <number{0-600}>]
Serial Hunt Group Delay Timer, in seconds
[urimatch = <{(HIDDEN)}>]
(HIDDEN)
sipserver debug
Following commands are available :

config : Configure debug settings

list : Display debug settings
exec : Execute a 'Trace & Debug' command. For qualified personnel
only.
sipserver debug config
Configure debug settings
Syntax : config [regstatuscode = <number>] [callstatuscode = <number>]
[retryafter = <number>] [contact = <string>]

Parameters :
[regstatuscode = <number>]
Forced status code in REGISTER response
[callstatuscode = <number>]
Forced status code in CALL response
[retryafter = <number>]
Retry-after header value
[contact = <string>]
specific contact header (e.g. for 3xx)
sipserver debug exec
Execute a 'Trace & Debug' command. For qualified personnel only.
Syntax : exec cmd = <quoted string>

Parameters :
cmd = <quoted string>
The debug command (or help)
[transparent = <{(HIDDEN)}>]
(HIDDEN)
sipserver debug list
Display debug settings
Syntax : list
sipserver dns
Following commands are available :

config : Configure DNS

list : Display DNS configuration
sipserver dns config
Configure DNS
Syntax : config [startentry = <{first|random}>] [maxentries = <number>]

Parameters :
[startentry = <{first|random}>]
Entry to start with in the registration procedure
[maxentries = <number>]
Maximum nbr of used entries in a DNS response
sipserver dns list
Display DNS configuration
Syntax : list
sipserver extua
Following commands are available :

add : Add external user agent

delete : Delete external user agent
modify : Modify external user agent
list : Show all external user agents
flush : Flush all external user agents
provision : Provision the supplementary service
withdraw : Withdraw the supplementary service
transparent : Make the supplementary service transparent
activate : Activate the supplementary service
deactivate : Deactivate the supplementary service
listservices : Show the services for the user agents
assign : Configure extua related services

Following command groups are available :

map
sipserver extua activate
Activate the supplementary service
Syntax : activate id = <{1|2|3|4}> type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}>

Parameters :
id = <{1|2|3|4}>
The external ua identifier
type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}>
The supplementary service type
[name = <{(HIDDEN)}>]
(HIDDEN)
[status = <{(HIDDEN)}>]
(HIDDEN)
[modus = <{(HIDDEN)}>]
(HIDDEN)
sipserver extua add
Add external user agent
Syntax : add id = <number> [aor = <string>] [username = <string>]
[password = <password>] [displayname = <quoted string>]
[intf = <{loop|Internet|LocalNetwork}>]
[sipport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|
biff|bootpc|bootps|chargen|clearcase|daytime|discard|
dns|domain|doom|echo|exec|finger|ftp|ftp-data|gopher|
h323|httpproxy|ike|ils|imap2|imap3|ingres-net|
ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-
dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|
nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|
syslog|systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows}
or number>]
[outboundregistrar = <string>] [outboundproxy = <{}>]
[registerexpire = <number{0-31536000}>]
[status = <{disabled|enabled}>] [P-Preferred-Id-URI = <string>]
[P-Preferred-Id-DisplayName = <string>] [Realm = <{1}>]
[HuntGroupMode = <{parallel|serial}>]

Parameters :
id = <number>
The external ua identifier
[aor = <string>]
The SIP URI related to this Address-Of-Record
[username = <string>]
The authentication username related to this Address-Of-Record
[password = <password>]
The authentication password related to this Address-Of-Record
[displayname = <quoted string>]
An alias name for the SIP_URI
[intf = <{loop|Internet|LocalNetwork}>]
The WAN interface name
[sipport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|
exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|
imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|
netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|
nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|
sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|telnet|time|
timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami|
xwindows} or number>]
The WAN SIP port number
[outboundregistrar = <string>]
Add outbound registrar
[outboundproxy = <{}>]
Add outbound proxy number
[registerexpire = <number{0-31536000}>]
The register expiry time
[status = <{disabled|enabled}>]
The status of the external user agent
[P-Preferred-Id-URI = <string>]
P-preferred-id URI, use aor if none configured
[P-Preferred-Id-DisplayName = <string>]
P-preferred-id display name, use displayname if none configured
[Realm = <{1}>]
Add realm index
[HuntGroupMode = <{parallel|serial}>]
Hunt group mode: parallel or serial
sipserver extua assign
Configure extua related services
Syntax : assign id = <{1|2|3|4}> [AES_from_email_address = <string>]
[AES_to_email_address = <string>]
[AES_outg_SMTP_server = <string>]
[voicemailsizelimit = <number>] [vmnr-timer = <number>]
[cfu-dest = <string>] [cfb-dest = <string>]
[cfnr-dest = <string>] [cfnr-timer = <number>]
[cf-mode = <{302|relay}>]
[HuntGroupMode = <{parallel|serial}>]

Parameters :
id = <{1|2|3|4}>
The external ua identifier
[AES_from_email_address = <string>]
Sender emailaddress to be used
[AES_to_email_address = <string>]
Recipient emailaddress to be used
[AES_outg_SMTP_server = <string>]
outgoing SMTP-server to be used
[voicemailsizelimit = <number>]
voicemail size limit to be used
[vmnr-timer = <number>]
Voice Mail on No Reply timeout
[cfu-dest = <string>]
Call forwarding unconditional destination uri
[cfb-dest = <string>]
Call forwarding on bussy destination uri
[cfnr-dest = <string>]
Call forwarding on no reply destination uri
[cfnr-timer = <number>]
Call forwarding on no reply timeou
[cf-mode = <{302|relay}>]
Call forwarding mode 302 or relay
[HuntGroupMode = <{parallel|serial}>]
Hunt group mode: parallel or serial
sipserver extua deactivate
Deactivate the supplementary service
Syntax : deactivate id = <{1|2|3|4}>
type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}>

Parameters :
id = <{1|2|3|4}>
The external ua identifier
sipserver extua flush
Flush all external user agents
Syntax : flush
sipserver extua list
Show all external user agents
Syntax : list [id = <{1|2|3|4}>]

Parameters :
[id = <{1|2|3|4}>]
The external ua identifier
sipserver extua listservices
Show the services for the user agents
Syntax : listservices [id = <{1|2|3|4}>]

Parameters :
[id = <{1|2|3|4}>]
The external ua identifier
sipserver extua map
Following commands are available :

add : Add external-internal user agent connection

delete : Delete external-internal user agent connection
modify : Modify external-internal user agent connection
list : Show all external-internal user agent connections
flush : Flush all external-internal user agent connections
sipserver extua map add
Add external-internal user agent connection
Syntax : add extua = <{1|2|3|4}> intua = <{}>

Parameters :
extua = <{1|2|3|4}>
The external user agent identifier
intua = <{}>
The internal user agent identifier
sipserver extua map delete
Delete external-internal user agent connection
Syntax : delete extua = <{1|2|3|4}> intua = <{}>

Parameters :
extua = <{1|2|3|4}>
The external user agent identifier
intua = <{}>
The internal user agent identifier
sipserver extua map flush
Flush all external-internal user agent connections
Syntax : flush
sipserver extua map list
Show all external-internal user agent connections
Syntax : list [extua = <{1|2|3|4}>]

Parameters :
[extua = <{1|2|3|4}>]
The internal user agent identifier
sipserver extua map modify
Modify external-internal user agent connection
Syntax : modify extua = <{1|2|3|4}> intua = <{}> newintua = <{}>

Parameters :
extua = <{1|2|3|4}>
The external user agent identifier
intua = <{}>
The internal user agent identifier
newintua = <{}>
The internal user agent identifier
sipserver extua modify
Modify external user agent
Syntax : modify id = <{1|2|3|4}> [aor = <string>] [username = <string>]
[password = <password>] [displayname = <quoted string>]
[intf = <{loop|Internet|LocalNetwork}>]
[sipport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|
biff|bootpc|bootps|chargen|clearcase|daytime|
discard|dns|domain|doom|echo|exec|finger|ftp|ftp-
data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|
login|netbios-dgm|netbios-ns|netbios-ssn|netwall|
netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|
pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|
sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|
telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>]
[outboundregistrar = <string>] [outboundproxy = <{}>]
[registerexpire = <number{0-31536000}>]
[status = <{disabled|enabled}>]
[P-Preferred-Id-URI = <string>]
[P-Preferred-Id-DisplayName = <string>] [Realm = <{1}>]
[HuntGroupMode = <{parallel|serial}>]

Parameters :
id = <{1|2|3|4}>
The external ua identifier
[aor = <string>]
The SIP URI related to this Address-Of-Record
[username = <string>]
The authentication username related to this Address-Of-Record
[password = <password>]
The authentication password related to this Address-Of-Record
[displayname = <quoted string>]
An alias name for the SIP_URI
[intf = <{loop|Internet|LocalNetwork}>]
The WAN interface name
[sipport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|
exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|
imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|
netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|
nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|
sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|telnet|time|
timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami|
xwindows} or number>]
The WAN SIP port number
[outboundregistrar = <string>]
Add outbound registrar
[outboundproxy = <{}>]
Add outbound proxy number
[registerexpire = <number{0-31536000}>]
The register expiry time
[status = <{disabled|enabled}>]
The status of the external user agent
[P-Preferred-Id-URI = <string>]
P-preferred-id URI, use aor if none configured
[P-Preferred-Id-DisplayName = <string>]
P-preferred-id display name, use displayname if none configured
[Realm = <{1}>]
Add realm index
[HuntGroupMode = <{parallel|serial}>]
Hunt group mode: parallel or serial
sipserver extua provision
Provision the supplementary service
Syntax : provision id = <{1|2|3|4}>
type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}>

Parameters :
id = <{1|2|3|4}>
The external ua identifier
type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}>
The supplementary service type
[name = <{(HIDDEN)}>]
(HIDDEN)
[status = <{(HIDDEN)}>]
(HIDDEN)
[modus = <{(HIDDEN)}>]
(HIDDEN)
sipserver extua transparent
Make the supplementary service transparent
Syntax : transparent id = <{1|2|3|4}>
type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}>

Parameters :
id = <{1|2|3|4}>
The external ua identifier
type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}>
The supplementary service type
[name = <{(HIDDEN)}>]
(HIDDEN)
[status = <{(HIDDEN)}>]
(HIDDEN)
[modus = <{(HIDDEN)}>]
(HIDDEN)
sipserver extua withdraw
Withdraw the supplementary service
Syntax : withdraw id = <{1|2|3|4}> type = <{clip|clir|cfnr|cfu|cfb|vmnr|mce}>

extua intua
sipserver inboundauth extua
Following commands are available :

config : Configure which methods should be authenticated

list : List the methods
sipserver inboundauth extua config
Configure which methods should be authenticated
Syntax : config [noncelifetime = <number{1-86400}>]
[BYE = <{disabled|enabled}>] [INFO = <{disabled|enabled}>]
[INVITE = <{disabled|enabled}>]
[NOTIFY = <{disabled|enabled}>]
[OPTIONS = <{disabled|enabled}>]
[PING = <{disabled|enabled}>] [PRACK = <{disabled|enabled}>]
[REFER = <{disabled|enabled}>]
[REGISTER = <{disabled|enabled}>]
[SUBSCRIBE = <{disabled|enabled}>]
[UPDATE = <{disabled|enabled}>]

Parameters :
[noncelifetime = <number{1-86400}>]
maximum lifetime of a nonce
[BYE = <{disabled|enabled}>]

[INFO = <{disabled|enabled}>]

[INVITE = <{disabled|enabled}>]

[NOTIFY = <{disabled|enabled}>]

[OPTIONS = <{disabled|enabled}>]

[PING = <{disabled|enabled}>]

[PRACK = <{disabled|enabled}>]

[REFER = <{disabled|enabled}>]

[REGISTER = <{disabled|enabled}>]

[SUBSCRIBE = <{disabled|enabled}>]

[UPDATE = <{disabled|enabled}>]
sipserver inboundauth extua list
List the methods
Syntax : list
sipserver inboundauth intua
Following commands are available :

config : Configure which methods should be authenticated

list : List the methods
sipserver inboundauth intua config
Configure which methods should be authenticated
Syntax : config [noncelifetime = <number{1-86400}>]
[BYE = <{disabled|enabled}>] [INFO = <{disabled|enabled}>]
[INVITE = <{disabled|enabled}>]
[NOTIFY = <{disabled|enabled}>]
[OPTIONS = <{disabled|enabled}>]
[PING = <{disabled|enabled}>] [PRACK = <{disabled|enabled}>]
[REFER = <{disabled|enabled}>]
[REGISTER = <{disabled|enabled}>]
[SUBSCRIBE = <{disabled|enabled}>]
[UPDATE = <{disabled|enabled}>]

Parameters :
[noncelifetime = <number{1-86400}>]
maximum lifetime of a nonce
[BYE = <{disabled|enabled}>]

[INFO = <{disabled|enabled}>]

[INVITE = <{disabled|enabled}>]

[NOTIFY = <{disabled|enabled}>]

[OPTIONS = <{disabled|enabled}>]

[PING = <{disabled|enabled}>]

[PRACK = <{disabled|enabled}>]

[REFER = <{disabled|enabled}>]

[REGISTER = <{disabled|enabled}>]

[SUBSCRIBE = <{disabled|enabled}>]

[UPDATE = <{disabled|enabled}>]
sipserver inboundauth intua list
List the methods
Syntax : list
sipserver intua
Following commands are available :

add : Add internal user agent

delete : Delete internal user agent
modify : Modify internal user agent
list : Show all internal user agents
flush : Flush all internal user agents
config : Configure common parameters for all INTUAs

Following command groups are available :

map
sipserver intua add
Add internal user agent
Syntax : add id = <number> [aor = <string>] [username = <string>]
[password = <password>] [status = <{disabled|enabled}>]
[Realm = <{1}>]

Parameters :
id = <number>
The internal ua identifier
[aor = <string>]
The SIP URI related to this Address-Of-Record
[username = <string>]
The authentication username related to this Address-Of-Record
[password = <password>]
The authentication password related to this Address-Of-Record
[status = <{disabled|enabled}>]
The status of the internal user agent
[Realm = <{1}>]
Add realm index
sipserver intua config
Configure common parameters for all INTUAs
Syntax : config [callwaiting = <{disabled|enabled}>]
[localcalltransferonactiveheld = <{disabled|enabled}>]

Parameters :
[callwaiting = <{disabled|enabled}>]

[localcalltransferonactiveheld = <{disabled|enabled}>]
sipserver intua delete
Delete internal user agent
Syntax : delete id = <{}>

Parameters :
id = <{}>
The internal ua identifier
sipserver intua flush
Flush all internal user agents
Syntax : flush
sipserver intua list
Show all internal user agents
Syntax : list [id = <{}>]

Parameters :
[id = <{}>]
The internal ua identifier
sipserver intua map
Following commands are available :

add : Add internal-external user agent connection

delete : Delete internal-external user agent connection
modify : Modify internal-external user agent connection
list : Show all internal-external user agent connections
flush : Flush all internal-external user agent connections
sipserver intua map add
Add internal-external user agent connection
Syntax : add intua = <{}> extua = <{1|2|3|4}> [priority = <number>]

Parameters :
intua = <{}>
The internal user agent identifier
extua = <{1|2|3|4}>
The external user agent identifier
[priority = <number>]
The external user agent priority
sipserver intua map delete
Delete internal-external user agent connection
Syntax : delete intua = <{}> extua = <{1|2|3|4}>

Parameters :
intua = <{}>
The internal user agent identifier
extua = <{1|2|3|4}>
The external user agent identifier
sipserver intua map flush
Flush all internal-external user agent connections
Syntax : flush
sipserver intua map list
Show all internal-external user agent connections
Syntax : list [intua = <{}>]

Parameters :
[intua = <{}>]
The internal user agent identifier
sipserver intua map modify
Modify internal-external user agent connection
Syntax : modify intua = <{}> extua = <{1|2|3|4}> [priority = <number>]
newextua = <{1|2|3|4}> [newpriority = <number>]

Parameters :
intua = <{}>
The internal user agent identifier
extua = <{1|2|3|4}>
The external user agent identifier
[priority = <number>]
The external user agent priority
newextua = <{1|2|3|4}>
The external user agent identifier
[newpriority = <number>]
The external user agent priority
sipserver intua modify
Modify internal user agent
Syntax : modify id = <{}> [aor = <string>] [username = <string>]
[password = <password>] [status = <{disabled|enabled}>]
[Realm = <{1}>]

Parameters :
id = <{}>
The internal ua identifier
[aor = <string>]
The SIP URI related to this Address-Of-Record
[username = <string>]
The authentication username related to this Address-Of-Record
[password = <password>]
The authentication password related to this Address-Of-Record
[status = <{disabled|enabled}>]
The status of the internal user agent
[Realm = <{1}>]
Add realm index
sipserver list
Display the general parameters
Syntax : list
sipserver outbproxy
Following commands are available :

add : Add outbound proxy

delete : Delete outbound proxy
modify : Modify outbound proxy
list : Show all outbound proxies
flush : Flush all outbound proxies
sipserver outbproxy add
Add outbound proxy
Syntax : add id = <number> [address = <string>]
[port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|
domain|doom|echo|exec|finger|ftp|ftp-data|gopher|h323|
httpproxy|ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|
irc-o|irc-u|kerberos|ldap|login|netbios-dgm|netbios-ns|
netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-
net|sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|
tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami|
xwindows} or number>]

Parameters :
id = <number>
The outbound proxy id
[address = <string>]
The outbound proxy address
[port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec|
finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-
dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|
nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|
sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>]
The outbound proxy port
sipserver outbproxy delete
Delete outbound proxy
Syntax : delete id = <{}>

Parameters :
id = <{}>
The outbound proxy id
sipserver outbproxy flush
Flush all outbound proxies
Syntax : flush
sipserver outbproxy list
Show all outbound proxies
Syntax : list [id = <{}>]

Parameters :
[id = <{}>]
The outbound proxy id
sipserver outbproxy modify
Modify outbound proxy
Syntax : modify id = <{}> [address = <string>]
[port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|
biff|bootpc|bootps|chargen|clearcase|daytime|discard|
dns|domain|doom|echo|exec|finger|ftp|ftp-data|gopher|
h323|httpproxy|ike|ils|imap2|imap3|ingres-net|
ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-
dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|
nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|
syslog|systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows}
or number>]

Parameters :
id = <{}>
The outbound proxy id
[address = <string>]
The outbound proxy address
[port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec|
finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-
dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|
nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|
sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>]
The outbound proxy port
sipserver outbreg
Following commands are available :

add : Add outbound registrar

delete : Delete outbound registrar
modify : Modify outbound registrar
list : Show all outbound registrar's
flush : Flush all outbound registrar's
sipserver outbreg add
Add outbound registrar
Syntax : add id = <number> [address = <string>]
[port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|
domain|doom|echo|exec|finger|ftp|ftp-data|gopher|h323|
httpproxy|ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|
irc-o|irc-u|kerberos|ldap|login|netbios-dgm|netbios-ns|
netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-
net|sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|
tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami|
xwindows} or number>]

Parameters :
id = <number>
The outbound registrar id
[address = <string>]
The outbound registrar address
[port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec|
finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-
dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|
nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|
sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>]
The outbound registrar port
sipserver outbreg delete
Delete outbound registrar
Syntax : delete id = <{}>

Parameters :
id = <{}>
The outbound registrar id
sipserver outbreg flush
Flush all outbound registrar's
Syntax : flush
sipserver outbreg list
Show all outbound registrar's
Syntax : list [id = <{}>]

Parameters :
[id = <{}>]
The outbound registrar id
sipserver outbreg modify
Modify outbound registrar
Syntax : modify id = <{}> [address = <string>]
[port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|
biff|bootpc|bootps|chargen|clearcase|daytime|discard|
dns|domain|doom|echo|exec|finger|ftp|ftp-data|gopher|
h323|httpproxy|ike|ils|imap2|imap3|ingres-net|
ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-
dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|
nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|
syslog|systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows}
or number>]

Parameters :
id = <{}>
The outbound registrar id
[address = <string>]
The outbound registrar address
[port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec|
finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-
dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|
nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|
sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows} or number>]
The outbound registrar port
sipserver realm
Following commands are available :

add : Add realm configuration

delete : Delete realm configuration
modify : Modify realm configuration
list : Show all realm configuration
flush : Flush all realm configuration
sipserver realm add
Add realm configuration
Syntax : add id = <number> [realm = <string>]
[realmcheck = <{disabled|enabled}>]

Parameters :
id = <number>
The realm identifier
[realm = <string>]
The realm-string
[realmcheck = <{disabled|enabled}>]
should realm be checked
sipserver realm delete
Delete realm configuration
Syntax : delete id = <{1}>

Parameters :
id = <{1}>
The realm identifier
sipserver realm flush
Flush all realm configuration
Syntax : flush
sipserver realm list
Show all realm configuration
Syntax : list [id = <{1}>]

Parameters :
[id = <{1}>]
The realm identifier
sipserver realm modify
Modify realm configuration
Syntax : modify id = <number> [realm = <string>]
[realmcheck = <{disabled|enabled}>]

Parameters :
id = <number>
The realm identifier
[realm = <string>]
The realm-string
[realmcheck = <{disabled|enabled}>]
should realm be checked
sipserver registrar
Following commands are available :

config : Configure registrar

list : Display the registrar configuration

Following command groups are available :

bind loc
sipserver registrar bind
Following commands are available :

add : Add interface

delete : Delete interface
list : Show all interfaces
flush : Flush all interfaces
sipserver registrar bind add
Add interface
Syntax : add intf = <{Internet|LocalNetwork}>
[sipport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|
biff|bootpc|bootps|chargen|clearcase|daytime|discard|
dns|domain|doom|echo|exec|finger|ftp|ftp-data|gopher|
h323|httpproxy|ike|ils|imap2|imap3|ingres-net|
ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-
dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|
nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|
printer|qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|
syslog|systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|xwindows}
or number>]

Parameters :
intf = <{Internet|LocalNetwork}>
The LAN interface name
[sipport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|
exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|
imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|
netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|
nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|
sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|telnet|time|
timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami|
xwindows} or number>]
The LAN SIP port number
sipserver registrar bind delete
Delete interface
Syntax : delete intf = <{}>

Parameters :
intf = <{}>
The LAN interface name
sipserver registrar bind flush
Flush all interfaces
Syntax : flush
sipserver registrar bind list
Show all interfaces
Syntax : list [intf = <{}>]

Parameters :
[intf = <{}>]
The LAN interface name
sipserver registrar config
Configure registrar
Syntax : config [mode = <{process|snoop}>]
[registerexpire = <number{0-31536000}>]

Parameters :
[mode = <{process|snoop}>]
The registrar mode (process|snoop)
[registerexpire = <number{0-31536000}>]
The register expiry time
sipserver registrar list
Display the registrar configuration
Syntax : list
sipserver registrar loc
Following commands are available :

list : Show the location database

sipserver registrar loc list
Show the location database
Syntax : list
sntp
Following commands are available :

add : Add NTP server

list : List the NTP servers
delete : Delete NTP server from list
flush : Flush NTP server list and SNTP client configuration
config : Modify/Display configuration

Following command groups are available :

debug
sntp add
Add NTP server
Syntax : add [addr = <ip-address>] [name = <string>]
[version = <number{1-4}>]

Parameters :
[addr = <ip-address>]
IP address of NTP server to be added to list
[name = <string>]
DNS name of NTP server to be added to list. If both the IP address and
the DNS name are provided, the IP address is ignored.
[version = <number{1-4}>]
SNTP version of server (1,2,3 or 4)
sntp config
Modify/Display configuration
Syntax : config [state = <{enabled|disabled}>] [poll = <number{1-10080}>]
[pollpresync = <number{1-60}>]
[wanSubscribe = <{enabled|disabled}>]

Parameters :
[state = <{enabled|disabled}>]
Enable/Disable SNTP client
[poll = <number{1-10080}>]
polling interval (1 min, ... ,10080min(=7days))
[pollpresync = <number{1-60}>]
polling interval before first sync (1 min, ... ,60min)
[wanSubscribe = <{enabled|disabled}>]
Enable/Disable subscribe wan connection
sntp debug
Following commands are available :

traceconfig : Modify SNTP client trace configuration

sntp debug traceconfig
Modify SNTP client trace configuration
Syntax : traceconfig [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable tracing.
sntp delete
Delete NTP server from list
Syntax : delete [addr = <ip-address>] [name = <string>]

Parameters :
[addr = <ip-address>]
IP address of NTP server to be removed from list
[name = <string>]
DNS name of NTP server to be removed from list
sntp flush
Flush NTP server list and SNTP client configuration
Syntax : flush
sntp list
List the NTP servers
Syntax : list
software
Following commands are available :

download : Download parameters.

version : Display the software version.
switchover : Switch from active to passive firmware & reboot.
upgrade : Force the gateway into LAN upgrade mode (Ctrl-BOOTP).
deletepassive : Delete passive image.
duplicate : Duplicate the active firmware (passive = active).
software deletepassive
Delete passive image.
Syntax : deletepassive
software download
Download parameters.
Syntax : download filetype = <{firmware}> url = <string>
[username = <string>] [password = <string>]
[filesize = <string>] [targetfilename = <string>]

Parameters :
filetype = <{firmware}>
The type of the file to be downloaded.
url = <string>
Set the HTTP URL where the file is to be found including remote filename.
[username = <string>]
Set the name to be used to authenticate to the download server.
[password = <string>]
Set the password the be used to authenticate to the download server.
[filesize = <string>]
Set the size of the file to be downloaded.
[targetfilename = <string>]
Set the filename used to save the file on the modem.
software duplicate
Duplicate the active firmware (passive = active).
Syntax : duplicate
software switchover
Switch from active to passive firmware & reboot.
Syntax : switchover [reuseconfig = <{yes|no}>]

Parameters :
[reuseconfig = <{yes|no}>]
Confirm to use the existing configuration.
software upgrade
Force the gateway into LAN upgrade mode (Ctrl-BOOTP).
Syntax : upgrade
software version
Display the software version.
Syntax : version
statecheck
Following commands are available :

config : Configure checkd parameters.

statecheckadd : Add a statecheck object.
statecheckdelete : Delete a statecheck object.
groupadd : Add a group object.
groupdelete : Delete a group object.
checkadd : Add a check object.
checkdelete : Delete a check object.
list : List checks.
statecheck checkadd
Add a check object.
Syntax : checkadd [statecheck = <{}>] group = <{}> name = <string>
object = <string> paramname = <string>
paramtype = <{string|uint|bool}>
[paramop = <{and|or|single}>]
matchtype = <{equal|differ|statdelta}>
match = <quoted string> [conschecks = <number>]

Parameters :
[statecheck = <{}>]
The name of the statecheck.
group = <{}>
The name of the group.
name = <string>
The name of the check.
object = <string>
The object to check.
paramname = <string>
The parameter to check.
paramtype = <{string|uint|bool}>
The parameter type.
[paramop = <{and|or|single}>]
The parameter operator type.
matchtype = <{equal|differ|statdelta}>
The match type.
match = <quoted string>
The match value.
[conschecks = <number>]
The number of consecutuve checks the result has to be inactive before the
inactive parameter changes
statecheck checkdelete
Delete a check object.
Syntax : checkdelete statecheck = <{}> group = <{}> name = <{}>

Parameters :
statecheck = <{}>
The name of the statecheck.
group = <{}>
The name of the group.
name = <{}>
The name of the check.
statecheck config
Configure checkd parameters.
Syntax : config [statecheck = <{}>] interval = <number> timeout = <number>
[groupop = <{and|or}>] [dmtree = <{igd|atomic}>]

Parameters :
[statecheck = <{}>]
The name of the statecheck.
interval = <number>
The interval seconds between checks.
timeout = <number>
The Timeout seconds after which checking stops.
[groupop = <{and|or}>]
Group operator type.
[dmtree = <{igd|atomic}>]
Client type.
statecheck groupadd
Add a group object.
Syntax : groupadd [statecheck = <{}>] name = <string> [checkop = <{and|or}>]

Parameters :
[statecheck = <{}>]
The name of the statecheck.
name = <string>
The name of the group.
[checkop = <{and|or}>]
Check operator type.
statecheck groupdelete
Delete a group object.
Syntax : groupdelete statecheck = <{}> name = <{}>

Parameters :
statecheck = <{}>
The name of the statecheck.
name = <{}>
The name of the group.
statecheck list
List checks.
Syntax : list
statecheck statecheckadd
Add a statecheck object.
Syntax : statecheckadd name = <string>

Parameters :
name = <string>
The name of the statecheck.
statecheck statecheckdelete
Delete a statecheck object.
Syntax : statecheckdelete statecheck = <{}>

Parameters :
statecheck = <{}>
The name of the statecheck.
syslog
Following commands are available :

config : Set/Display configuration

ruleadd : Add a new rule to the syslog configuration.
ruledelete : Delete a rule in the syslog configuration
flush : Flushes syslog rules.
list : List the current syslog configuration

Following command groups are available :

msgbuf
[HIDDEN]syslog bootup
Disable bootmode flag
Syntax : bootup
syslog config
Set/Display configuration
Syntax : config [activate = <{disabled|enabled}>] [timeout = <number{0-60}>]
[format = <{standard|welf}>]

Parameters :
[activate = <{disabled|enabled}>]
Syslog send to collectors enabled.
[timeout = <number{0-60}>]
Syslog flooding timeout (in secs) to collectors.
[format = <{standard|welf}>]
Syslog contents format
syslog flush
Flushes syslog rules.
Syntax : flush
syslog list
List the current syslog configuration
Syntax : list
syslog msgbuf
Following commands are available :

show : Show messages in the syslog message buffer.

send : Send messages to remote syslog server.
flush : Flush all messages in syslog message buffer.
syslog msgbuf flush
Flush all messages in syslog message buffer.
Syntax : flush
syslog msgbuf send
Send messages to remote syslog server.
Syntax : send [fac = <{kern|user|mail|daemon|auth|syslog|lpr|news|uucp|cron|
security|ftp|ntp|audit|logalert|clock|local0|local1|
local2|local3|local4|local5|local6|local7}>]
[sev = <{emerg|alert|crit|err|warning|notice|info|debug}>]
[hist = <{disabled|enabled}>] dest = <ip-address>

Parameters :
[fac = <{kern|user|mail|daemon|auth|syslog|lpr|news|uucp|cron|security|ftp|
ntp|audit|logalert|clock|local0|local1|local2|local3|local4|local5|
local6|local7}>]
Syslog facility level.
[sev = <{emerg|alert|crit|err|warning|notice|info|debug}>]
Syslog severity level.
[hist = <{disabled|enabled}>]
Syslog display message history (over several bootups)
dest = <ip-address>
Remote syslog server destination: an ip-address.
syslog msgbuf show
Show messages in the syslog message buffer.
Syntax : show [fac = <{kern|user|mail|daemon|auth|syslog|lpr|news|uucp|cron|
security|ftp|ntp|audit|logalert|clock|local0|local1|
local2|local3|local4|local5|local6|local7}>]
[sev = <{emerg|alert|crit|err|warning|notice|info|debug}>]
[hist = <{disabled|enabled}>]

Parameters :
[fac = <{kern|user|mail|daemon|auth|syslog|lpr|news|uucp|cron|security|ftp|
ntp|audit|logalert|clock|local0|local1|local2|local3|local4|local5|
local6|local7}>]
Syslog facility level.
[sev = <{emerg|alert|crit|err|warning|notice|info|debug}>]
Syslog severity level.
[hist = <{disabled|enabled}>]
Syslog display message history (over several bootups)
syslog ruleadd
Add a new rule to the syslog configuration.
Syntax : ruleadd fac = <{kern|user|mail|daemon|auth|syslog|lpr|news|uucp|cron|
security|ftp|ntp|audit|logalert|clock|local0|local1|
local2|local3|local4|local5|local6|local7|all or comma-
seperated }>
sev = <{emerg|alert|crit|err|warning|notice|info|debug}>
dest = <ip-address>

Parameters :
fac = <{kern|user|mail|daemon|auth|syslog|lpr|news|uucp|cron|security|ftp|
ntp|audit|logalert|clock|local0|local1|local2|local3|local4|local5|
local6|local7|all or comma-seperated }>
Syslog rule facility.
sev = <{emerg|alert|crit|err|warning|notice|info|debug}>
Syslog rule severity.
dest = <ip-address>
Syslog rule destination: an ip-address.
syslog ruledelete
Delete a rule in the syslog configuration
Syntax : ruledelete rule_index = <number{1-16}>

Parameters :
rule_index = <number{1-16}>
Syslog rule index.
system
Following commands are available :

settime : Set/Get date, time, timezone, daylight savings time,

uptime.
dst : Set daylight saving values
reboot : Reboot the modem.
flush : Flush system configuration.
reset : Reset to (factory or ISP) defaults: user specific settings
will be cleared !
config : Set or change system config parameters.
timedreboot : Set or change editing mode timed reboot

Following command groups are available :

debug ipc ra
system config
Set or change system config parameters.
Syntax : config [upnp = <{disabled|enabled}>] [tr64 = <{disabled|enabled}>]
[tr64sessiontimeout = <number{30-45}>]
[tr64auth = <{disabled|enabled}>]
[mdap = <{disabled|enabled}>]
[led = <{blue|green|red|orange|flash|off}>]
[resetbutton = <{disabled|enabled}>]
[defaultconnection = <{loop|Internet|LocalNetwork}>]
[autosave = <{enabled|disabled}>]
[autosavedelay = <number{0-600}>]
[WANMode = <{ADSL|VDSL|SHDSL|ETH|UMTS}>]
[WANEthPort = <{ethif1|ethif2|ethif3|ethif4}>]

Parameters :
[upnp = <{disabled|enabled}>]
Enable/Disable upnp discovery
[tr64 = <{disabled|enabled}>]
Enable/Disable TR-64 discovery
[tr64sessiontimeout = <number{30-45}>]
TR-64 session timeout value (sec)
[tr64auth = <{disabled|enabled}>]
Enable/Disable TR-64 digest authentication
[mdap = <{disabled|enabled}>]
Enable/Disable mdap discovery
[led = <{blue|green|red|orange|flash|off}>]
Set system LED color
[resetbutton = <{disabled|enabled}>]
Enable/Disable reset-to-factory-defaults pushbutton
[defaultconnection = <{loop|Internet|LocalNetwork}>]
The name of the default internet connection.
[autosave = <{enabled|disabled}>]
Enable/Disable autosaves
[autosavedelay = <number{0-600}>]
Autosave delay in seconds (0 for immediate save)
[WANMode = <{ADSL|VDSL|SHDSL|ETH|UMTS}>]
Set autosensing wan mode
[WANEthPort = <{ethif1|ethif2|ethif3|ethif4}>]
Set autosensing eth wan port
[wps = <{(HIDDEN)}>]
(HIDDEN)
[drst = <{(HIDDEN)}>]
(HIDDEN)
[digestauth = <{(HIDDEN)}>]
(HIDDEN)
[dualinterface = <{(HIDDEN)}>]
(HIDDEN)
system debug
Following commands are available :

cpu : CPU usage statistics

mem : Memory usage statistics
autosave : Autosave debugging commands
system debug autosave
Autosave debugging commands
Syntax : autosave [trace = <{disabled|enabled}>]

Parameters :
[trace = <{disabled|enabled}>]
Enable/Disable autosave traces
system debug cpu
CPU usage statistics
Syntax : cpu [delay = <number{1-60}>] [iterations = <number{1-4000000}>]
[tasks = <{disabled|enabled}>]

Parameters :
[delay = <number{1-60}>]
Delay between stats updates
[iterations = <number{1-4000000}>]
Number of iteration before ending
[tasks = <{disabled|enabled}>]
Show active tasks
system debug mem
Memory usage statistics
Syntax : mem [expand = <{disabled|enabled}>]

Parameters :
[expand = <{disabled|enabled}>]
Dump of /proc/meminfo
system dst
Set daylight saving values
Syntax : dst [mode = <{Absolute|Relative}>] [startdate = <dd/mm/yyyy>]
[starttime = <hh:mm:ss>] [enddate = <dd/mm/yyyy>]
[endtime = <hh:mm:ss>]
[startweekday = <{Sunday|Monday|Tuesday|Wednesday|Thursday|Friday|
Saturday}>]
[starthour = <number{0-23}>] [startweek = <number{1-5}>]
[startmonth = <number{1-12}>]
[endweekday = <{Sunday|Monday|Tuesday|Wednesday|Thursday|Friday|
Saturday}>]
[endhour = <number{0-23}>] [endweek = <number{1-5}>]
[endmonth = <number{1-12}>]

Parameters :
[mode = <{Absolute|Relative}>]
Set daylight saving mode
[startdate = <dd/mm/yyyy>]
Set the start date of the daylight saving in the absolute mode
[starttime = <hh:mm:ss>]
Set the start time of the daylight saving in the absolute mode
[enddate = <dd/mm/yyyy>]
Set the end date of the daylight saving in the absolute mode
[endtime = <hh:mm:ss>]
Set the end time of the daylight saving in the absolute mode
[startweekday = <{Sunday|Monday|Tuesday|Wednesday|Thursday|Friday|
Saturday}>]
Set the start weekday of the daylight saving in the relative mode
[starthour = <number{0-23}>]
Set the start hour of the daylight saving in the relative mode
[startweek = <number{1-5}>]
Set the start week of the daylight saving in the relative mode
[startmonth = <number{1-12}>]
Set the start month of the daylight saving in the ralative mode
[endweekday = <{Sunday|Monday|Tuesday|Wednesday|Thursday|Friday|Saturday}>]

Set the end weekday of the daylight saving in the relative mode
[endhour = <number{0-23}>]
Set the end hour of the daylight saving in the relative mode
[endweek = <number{1-5}>]
Set the end week of the daylight saving in the relative mode
[endmonth = <number{1-12}>]
Set the end month of the daylight saving in the relative mode
[status = <{(HIDDEN)}>]
(HIDDEN)
system flush
Flush system configuration.
Syntax : flush
system ipc
Following commands are available :

config : IPC configuration

system ipc config
IPC configuration
Syntax : config [prio-level = <number{0-255}>]

Parameters :
[prio-level = <number{0-255}>]
IPC priority traffic level
[HIDDEN]system locale
Set/Get regional settings.
Syntax : locale [dec_symbol = <{,|.}>] [group_symbol = <{.|,}>]
[date_separator = <{/|-|.}>]
[date_format = <{iso|ddmmyyyy|ddmmyy|mmddyyyy|mmddyy}>]
[time_format = <{iso|hmmss}>]
[datetime_format = <{iso|date+time|time+date}>]
[duration_format = <{dhmmss|hmmss}>]

Parameters :
[dec_symbol = <{,|.}>]
Set decimal symbol
[group_symbol = <{.|,}>]
Set digit grouping symbol
[date_separator = <{/|-|.}>]
Set date separator
[date_format = <{iso|ddmmyyyy|ddmmyy|mmddyyyy|mmddyy}>]
Set date format
[time_format = <{iso|hmmss}>]
Set time format
[datetime_format = <{iso|date+time|time+date}>]
Set date-time format
[duration_format = <{dhmmss|hmmss}>]
Set duration format
[HIDDEN]system qual
Following commands are available :

led : Led configuration

system qual led
Led configuration
Syntax : led [value = <{blue|green|red|orange|flash|off|allon|alloff|allblue|
allgreen|allred|unlock}>]

Parameters :
[value = <{blue|green|red|orange|flash|off|allon|alloff|allblue|allgreen|
allred|unlock}>]
Set system LED color
system ra
Following commands are available :

list : List remote access instances.

instadd : Add a remote access instances.
instdelete : Delete remote access instances.
config : Configure remote access parameters.
start : Starts temporary mode.
stop : Stops temporary mode.
system ra config
Configure remote access parameters.
Syntax : config name = <{remoteaccess}> [state = <{disabled|enabled}>]
[secure = <{enabled|disabled}>] [port = <number>]
[timeout = <number>]
[mode = <{Permanent|Temporary|Schedule}>] [ipintf = <string>]
[randompassword = <{enabled|disabled}>]
[randomport = <{enabled|disabled}>] [group = <string>]
[user = <string>] [todschedule = <string>]
[systemservice = <{GUI|webservice}>]

Parameters :
name = <{remoteaccess}>
Instance name
[state = <{disabled|enabled}>]
Enable/disable RAD.
[secure = <{enabled|disabled}>]
Use secure mode (https).
[port = <number>]
The port number.
[timeout = <number>]
The timeout value.
[mode = <{Permanent|Temporary|Schedule}>]
Mode Permanent or Temporary.
[ipintf = <string>]
The name of the xref to the IP interface.
[randompassword = <{enabled|disabled}>]
Create a random password.
[randomport = <{enabled|disabled}>]
Use a random port.
[group = <string>]
The name of the xref to the group keypath.
[user = <string>]
The name of the xref to the user keypath.
[todschedule = <string>]
The name of the xref to the ToD schedule.
[systemservice = <{GUI|webservice}>]
The system service type.
system ra instadd
Add a remote access instances.
Syntax : instadd name = <string>

Parameters :
name = <string>
Instance name
system ra instdelete
Delete remote access instances.
Syntax : instdelete name = <{remoteaccess}>

Parameters :
name = <{remoteaccess}>
Instance name
system ra list
List remote access instances.
Syntax : list [name = <{remoteaccess}>]

Parameters :
[name = <{remoteaccess}>]
The name of the instance.
system ra start
Starts temporary mode.
Syntax : start name = <{remoteaccess}>

Parameters :
name = <{remoteaccess}>
Instance name
system ra stop
Stops temporary mode.
Syntax : stop name = <{remoteaccess}>

Parameters :
name = <{remoteaccess}>
Instance name
system reboot
Reboot the modem.
Syntax : reboot
system reset
Reset to (factory or ISP) defaults: user specific settings will be cleared !
Syntax : reset factory = <{yes|no}> proceed = <{no|yes}>

Parameters :
factory = <{yes|no}>
Option to reset to factory
proceed = <{no|yes}>
Confirmation for resetting the modem.
system settime
Set/Get date, time, timezone, daylight savings time, uptime.
Syntax : settime [date = <dd/mm/yyyy>] [time = <hh:mm:ss>]
[timezone = <(+ or -)hh:mm>]
[daylightsaving = <{disabled|enabled}>]
[geotimezonename = <{(UTC-12:00)|(UTC-11:00)|(UTC-10:00)|(UTC-
09:00)|(UTC-08:00)|(UTC-07:00)|(UTC-06:00)|
(UTC-05:00)|(UTC-04:00)|(UTC-03:30)|(UTC-
03:00)|(UTC-02:00)|(UTC-01:00)|(UTC)|
(UTC+01:00)|(UTC+02:00)|(UTC+03:00)|
(UTC+03:30)|(UTC+04:00)|(UTC+04:30)|
(UTC+05:00)|(UTC+05:30)|(UTC+05:45)|
(UTC+06:00)|(UTC+06:30)|(UTC+07:00)|
(UTC+08:00)|(UTC+09:00)|(UTC+09:30)|
(UTC+10:00)|(UTC+11:00)|(UTC+12:00)|
(UTC+13:00)}>]
[rtc = <{disabled|enabled}>]

Parameters :
[date = <dd/mm/yyyy>]
Set the system date
[time = <hh:mm:ss>]
Set the system time
[timezone = <(+ or -)hh:mm>]
Set the system timezone(-12:00...+14:00 / 15 minute resolution)
[daylightsaving = <{disabled|enabled}>]
Enable/Disable daylight saving
[geotimezonename = <{(UTC-12:00)|(UTC-11:00)|(UTC-10:00)|(UTC-09:00)|(UTC-
08:00)|(UTC-07:00)|(UTC-06:00)|(UTC-05:00)|(UTC-04:00)|
(UTC-03:30)|(UTC-03:00)|(UTC-02:00)|(UTC-01:00)|(UTC)|
(UTC+01:00)|(UTC+02:00)|(UTC+03:00)|(UTC+03:30)|
(UTC+04:00)|(UTC+04:30)|(UTC+05:00)|(UTC+05:30)|
(UTC+05:45)|(UTC+06:00)|(UTC+06:30)|(UTC+07:00)|
(UTC+08:00)|(UTC+09:00)|(UTC+09:30)|(UTC+10:00)|
(UTC+11:00)|(UTC+12:00)|(UTC+13:00)}>]
Set the geographical timezone by name
[rtc = <{disabled|enabled}>]
Enable/Disable the real time clock
[geotimezone = <{(HIDDEN)}>]
(HIDDEN)
[gtzn = <{(HIDDEN)}>]
(HIDDEN)
system timedreboot
Set or change editing mode timed reboot
Syntax : timedreboot [state = <{disabled|enabled}>]
[time = <number{0-983040}>] [date = <string>]

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable timed reboot
[time = <number{0-983040}>]
Change default countdown time (Min).
[date = <string>]
Set date/time to reboot (DD/MM/YYYY/HH:MM).
[HIDDEN]threshold
Following commands are available :

enable : Enables a threshold definition.

disable : Disables a threshold definition.
config : Configures a threshold definition.
reset : Reset threshold period.
clear : Clears threshold statistics.
list : Lists all threshold definitions.
stats : Lists threshold resources.
threshold clear
Clears threshold statistics.
Syntax : clear [id = <threshold id>]

Parameters :
[id = <threshold id>]
Threshold identifier.
threshold config
Configures a threshold definition.
Syntax : config [id = <threshold id>] [type = <{limit|threshold|trigger}>]
[count = <number{1-10000}>] [period = <number{1-100000}>]
[state = <{disabled|enabled}>]

Parameters :
[id = <threshold id>]
Threshold identifier.
[type = <{limit|threshold|trigger}>]
Type of threshold.
[count = <number{1-10000}>]
Threshold event count.
[period = <number{1-100000}>]
Threshold period.
[state = <{disabled|enabled}>]
Threshold state.
threshold disable
Disables a threshold definition.
Syntax : disable [id = <threshold id>]

Parameters :
[id = <threshold id>]
Threshold identifier.
threshold enable
Enables a threshold definition.
Syntax : enable [id = <threshold id>]

Parameters :
[id = <threshold id>]
Threshold identifier.
threshold list
Lists all threshold definitions.
Syntax : list
threshold reset
Reset threshold period.
Syntax : reset [id = <threshold id>]

Parameters :
[id = <threshold id>]
Threshold identifier.
threshold stats
Lists threshold resources.
Syntax : stats
tls
Following command groups are available :

acs-client https-server remote-upgraded self

tls acs-client
Following commands are available :

config : Display/modify tls settings

Following command groups are available :

cert
tls acs-client cert
Following commands are available :

add : Add a new certificate

delete : Delete a certificate
list : List certificates
tls acs-client cert add
Add a new certificate
Syntax : add filename = <string>

Parameters :
filename = <string>
name of the certificate file
tls acs-client cert delete
Delete a certificate
Syntax : delete index = <number>

Parameters :
index = <number>
Certificate index
tls acs-client cert list
List certificates
Syntax : list [index = <number>] [expand = <{disabled|enabled}>]

Parameters :
[index = <number>]
Certificate index
[expand = <{disabled|enabled}>]
Display more information
tls acs-client config
Display/modify tls settings
Syntax : config [state = <{disabled|enabled}>]
[auth-serv = <{disabled|enabled}>]
[valid-date = <{disabled|enabled}>]
[valid-domain = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
SSL/TLS client for ACS state
[auth-serv = <{disabled|enabled}>]
Request server authentication
[valid-date = <{disabled|enabled}>]
Check certificate validity date
[valid-domain = <{disabled|enabled}>]
Check certificate domain
tls https-server
Following commands are available :

config : Display/modify tls settings

Following command groups are available :

cert
tls https-server cert
Following commands are available :

add : Add a new certificate

delete : Delete a certificate
list : List certificates
tls https-server cert add
Add a new certificate
Syntax : add filename = <string>

Parameters :
filename = <string>
name of the certificate file
tls https-server cert delete
Delete a certificate
Syntax : delete index = <number>

Parameters :
index = <number>
Certificate index
tls https-server cert list
List certificates
Syntax : list [index = <number>] [expand = <{disabled|enabled}>]

Parameters :
[index = <number>]
Certificate index
[expand = <{disabled|enabled}>]
Display more information
tls https-server config
Display/modify tls settings
Syntax : config [state = <{disabled|enabled}>]
[auth-client = <{disabled|enabled}>]
[valid-date = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
SSL/TLS server for HTTPS state
[auth-client = <{disabled|enabled}>]
Request client authentication
[valid-date = <{disabled|enabled}>]
Check certificate validity date
[valid-domain = <{(HIDDEN)}>]
(HIDDEN)
tls remote-upgraded
Following commands are available :

config : Display/modify tls settings

Following command groups are available :

cert
tls remote-upgraded cert
Following commands are available :

add : Add a new certificate

delete : Delete a certificate
list : List certificates
tls remote-upgraded cert add
Add a new certificate
Syntax : add filename = <string>

Parameters :
filename = <string>
name of the certificate file
tls remote-upgraded cert delete
Delete a certificate
Syntax : delete index = <number>

Parameters :
index = <number>
Certificate index
tls remote-upgraded cert list
List certificates
Syntax : list [index = <number>] [expand = <{disabled|enabled}>]

Parameters :
[index = <number>]
Certificate index
[expand = <{disabled|enabled}>]
Display more information
tls remote-upgraded config
Display/modify tls settings
Syntax : config [state = <{disabled|enabled}>]
[auth-serv = <{disabled|enabled}>]
[valid-date = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
SSL/TLS client for remote upgraded state
[auth-serv = <{disabled|enabled}>]
Request server authentication
[valid-date = <{disabled|enabled}>]
Check certificate validity date
[valid-domain = <{(HIDDEN)}>]
(HIDDEN)
tls self
Following command groups are available :

cert
tls self cert
Following commands are available :

list : List certificates

tls self cert list
List certificates
Syntax : list [index = <number>] [expand = <{disabled|enabled}>]

Parameters :
[index = <number>]
Certificate index
[expand = <{disabled|enabled}>]
Display more information
[HIDDEN]tod
Following commands are available :

config : Configure tod parameters.

list : List config.

Following command groups are available :

action schedule
tod action
Following commands are available :

add : Add an action object.

delete : Delete an action object.
setvaladd : Add a setvalue object.
setvaldelete : Delete a setvalue object.
paramadd : Add a setvalue parameter.
paramdelete : Delete a setvalue parameter.
list : List actions.
tod action add
Add an action object.
Syntax : add [id = <number>]

Parameters :
[id = <number>]
The id of the actiom.
tod action delete
Delete an action object.
Syntax : delete actionid = <number>

Parameters :
actionid = <number>
The id of the action.
tod action list
List actions.
Syntax : list
tod action paramadd
Add a setvalue parameter.
Syntax : paramadd actionid = <number> setvalueid = <number> [id = <number>]
[object = <string>] [param = <string>] [value = <string>]
[on = <{active|inactive}>]

Parameters :
actionid = <number>
The id of the action.
setvalueid = <number>
The id of the setvalue action.
[id = <number>]
The id of the setvalue param.
[object = <string>]
Mbus object path.
[param = <string>]
Mbus parameter name.
[value = <string>]
Parameter value.
[on = <{active|inactive}>]
Active/inactive.
tod action paramdelete
Delete a setvalue parameter.
Syntax : paramdelete actionid = <number> setvalueid = <number>
paramid = <number>

Parameters :
actionid = <number>
The id of the action.
setvalueid = <number>
The id of the setvalue action.
paramid = <number>
The id of the setvalue param.
tod action setvaladd
Add a setvalue object.
Syntax : setvaladd actionid = <number> [id = <number>]

Parameters :
actionid = <number>
The id of the action.
[id = <number>]
The id of the setvalue actiom.
[on = <{(HIDDEN)}>]
(HIDDEN)
tod action setvaldelete
Delete a setvalue object.
Syntax : setvaldelete actionid = <number> setvalueid = <number>

Parameters :
actionid = <number>
The id of the action.
setvalueid = <number>
The id of the setvalue action.
tod config
Configure tod parameters.
Syntax : config [acchain = <string>] [state = <{enabled|disabled}>]

Parameters :
[acchain = <string>]
firewall chain name
[state = <{enabled|disabled}>]
enable/disable ToD
tod list
List config.
Syntax : list
tod schedule
Following commands are available :

add : Add a schedule object.

modify : Modify schedule parameters.
start : Start a schedule.
delete : Delete a schedule object.
dayadd : Add a day object.
daydelete : Delete a day object.
timeadd : Add a timerange object.
timedelete : Delete a timerange object.
timeabsadd : Add a timerange_abs object.
timeabsdelete : Delete a timerange_abs object.
list : List schedules.
tod schedule add
Add a schedule object.
Syntax : add [id = <number>] type = <{none|accesscontrol|action}>

Parameters :
[id = <number>]
The id of the schedule.
type = <{none|accesscontrol|action}>
The schedule type.
tod schedule dayadd
Add a day object.
Syntax : dayadd scheduleid = <number> [id = <number>]
weekday = <{mo|tu|we|th|fr|sa|su|all|weekend|workweek}>

Parameters :
scheduleid = <number>
The id of the schedule.
[id = <number>]
The id of the day.
weekday = <{mo|tu|we|th|fr|sa|su|all|weekend|workweek}>
The day of the week..
tod schedule daydelete
Delete a day object.
Syntax : daydelete scheduleid = <number> dayid = <number>

Parameters :
scheduleid = <number>
The id of the schedule.
dayid = <number>
The id of the day.
tod schedule delete
Delete a schedule object.
Syntax : delete scheduleid = <number>

Parameters :
scheduleid = <number>
The id of the schedule.
tod schedule list
List schedules.
Syntax : list
tod schedule modify
Modify schedule parameters.
Syntax : modify [expiretime = <string>] [nrofminutes = <number>]
[count = <number>] scheduleid = <number>
[mode = <{timerange|timeout|timerangeabs|timerangeedge}>]
[reference = <string>] [name = <quoted string>]
[action = <string>] [state = <{enabled|disabled}>]

Parameters :
[expiretime = <string>]
The absolute expire time.
[nrofminutes = <number>]
The number of minutes.
[count = <number>]
The timer count (0=periodical)
scheduleid = <number>
The id of the schedule.
[mode = <{timerange|timeout|timerangeabs|timerangeedge}>]
The mode.
[reference = <string>]
Access control reference.
[name = <quoted string>]
Friendly name.
[action = <string>]
Action.
[state = <{enabled|disabled}>]
Enable/disable
tod schedule start
Start a schedule.
Syntax : start scheduleid = <number> start = <{enabled|disabled}>

Parameters :
scheduleid = <number>
The id of the schedule.
start = <{enabled|disabled}>
Start the schedule
tod schedule timeabsadd
Add a timerange_abs object.
Syntax : timeabsadd scheduleid = <number> [rangeid = <number>]
[starttime = <string>] [endtime = <string>]

Parameters :
scheduleid = <number>
The id of the schedule.
[rangeid = <number>]
The id of the timerange_abs.
[starttime = <string>]
The absolute start time of the range.
[endtime = <string>]
The absolute end time of the range.
tod schedule timeabsdelete
Delete a timerange_abs object.
Syntax : timeabsdelete scheduleid = <number> rangeid = <number>

Parameters :
scheduleid = <number>
The id of the schedule.
rangeid = <number>
The id of the timerange_abs.
tod schedule timeadd
Add a timerange object.
Syntax : timeadd scheduleid = <number> dayid = <number> [id = <number>]
starthour = <number> startminute = <number>
endhour = <number> endminute = <number> [action = <string>]

Parameters :
scheduleid = <number>
The id of the schedule.
dayid = <number>
The id of the day.
[id = <number>]
The id of the timerange.
starthour = <number>
The start hour of the range.
startminute = <number>
The start minute of the range.
endhour = <number>
The end hour of the range.
endminute = <number>
The end minute of the range.
[action = <string>]
Action.
tod schedule timedelete
Delete a timerange object.
Syntax : timedelete scheduleid = <number> dayid = <number> timeid = <number>

Parameters :
scheduleid = <number>
The id of the schedule.
dayid = <number>
The id of the day.
timeid = <number>
The id of the timerange.
[HIDDEN]trigger
Following commands are available :

list : Display the triggers.

Following command groups are available :

rule
[HIDDEN]trigger chain
Following commands are available :

add : Add a chain.

delete : Delete a chain.
list : Display a list of chains.
flush : Flush all chains.
trigger chain add
Add a chain.
Syntax : add chain = <string>

Parameters :
chain = <string>
The name of the chain to add.
[policy = <{(HIDDEN)}>]
(HIDDEN)
trigger chain delete
Delete a chain.
Syntax : delete chain = <chain name>

Parameters :
chain = <chain name>
The name of the chain to delete.
trigger chain flush
Flush all chains.
Syntax : flush
trigger chain list
Display a list of chains.
Syntax : list [format = <{pretty|cli}>]

Parameters :
[format = <{pretty|cli}>]
The format of the chain list.
[HIDDEN]trigger chain modify
Modify a chain.
Syntax : modify chain = <chain name>

Parameters :
chain = <chain name>
The name of the chain to modify.
[policy = <{(HIDDEN)}>]
(HIDDEN)
trigger list
Display the triggers.
Syntax : list [name = <{}>]

Parameters :
[name = <{}>]
The name of a trigger.
trigger rule
Following commands are available :

list : Display a list of rules.

Following command groups are available :

debug
[HIDDEN]trigger rule add
Add a rule.
Syntax : add chain = <chain name> [index = <number>] [name = <string>]
[clink = <chain name>]
[srcintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>]
[srcip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|
192.168.1.253}>]
[dstintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>]
[dstip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|
192.168.1.253}>]
[serv [!]= <{ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|
SMB|imap|imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|
ssh|dns|nntp|ipsec|esp|ah|ike|DiffServ|sip|h323|dhcp|
rtsp|ssdp_serv|mdap_serv|syslog|VoIP-Inc-SIP-UDP|VoIP-
Inc-SIP-TCP|VoIP-Inc-RTP}>]
[length [!]= <{}>] [log = <{disabled|enabled}>]
[state = <{disabled|enabled}>] trigger = <{None|link}>

Parameters :
chain = <chain name>
The name of the chain which contains the rule.
[index = <number>]
The index of the rule in the chain.
[name = <string>]
The name of the new rule.
[clink = <chain name>]
The name of the chain to be parsed when this rule applies.
[srcintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>]
The name of the source interface expression.
[srcip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253}>]
The name of the source ip expression.
[dstintf [!]= <{wan|lan|local|tunnel|dmz|guest|voice_if}>]
The name of the destination interface expression.
[dstip [!]= <{contentsharing_ip|private|ssdp_ip|mdap_ip|192.168.1.253}>]
The name of the destination ip expression.
[serv [!]= <{ftp|icmp|igmp|telnet|http|httpproxy|https|RPC|NBT|SMB|imap|
imap3|imap4-ssl|imaps|pop2|pop3|pop3s|smtp|ssh|dns|nntp|ipsec|
esp|ah|ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv|mdap_serv|
syslog|VoIP-Inc-SIP-UDP|VoIP-Inc-SIP-TCP|VoIP-Inc-RTP}>]
The name of the service expression.
[length [!]= <{}>]
The name of the length expression.
[log = <{disabled|enabled}>]
Disable/Enable logging when this rule applies.
[state = <{disabled|enabled}>]
Disable/Enable this rule.
trigger = <{None|link}>
None, link (when clink is used) or trigger name.
[newindex = <{(HIDDEN)}>]
(HIDDEN)
[srcmac = <{(HIDDEN)}>]
(HIDDEN)
[connstate = <{(HIDDEN)}>]
(HIDDEN)
trigger rule debug
Following commands are available :

traceconfig : Display/Modify rule trace configuration.

stats : Display rule statistics.
clear : Clear rule statistics.
trigger rule debug clear
Clear rule statistics.
Syntax : clear [chain = <chain name>] [index = <number>]

Parameters :
[chain = <chain name>]
The name of the chain.
[index = <number>]
The index of the rule in the chain.
trigger rule debug stats
Display rule statistics.
Syntax : stats [chain = <chain name>] [index = <number>]

Parameters :
[chain = <chain name>]
The name of the chain.
[index = <number>]
The index of the rule in the chain.
trigger rule debug traceconfig
Display/Modify rule trace configuration.
Syntax : traceconfig [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Disable/Enable rule traces.
[HIDDEN]trigger rule delete
Delete a rule.
Syntax : delete chain = <chain name> index = <number>

Parameters :
chain = <chain name>
The name of the chain in which to delete the rule.
index = <number>
The number of the rule in the chain.
[HIDDEN]trigger rule flush
Flush all rules.
Syntax : flush [chain = <chain name>]

Parameters :
[chain = <chain name>]
The name of the chain to flush.
trigger rule list
Display a list of rules.
Syntax : list [chain = <chain name>] [format = <{pretty|cli}>]

Parameters :
[chain = <chain name>]
The name of the chain to list the rules of.
[format = <{pretty|cli}>]
The format of the rule list.
[HIDDEN]trigger rule modify
Modify a rule.
Syntax : modify chain = <chain name> [index = <number>] [newindex = <number>]
[name = <string>] [clink = <chain name>] [[!]srcintf]
[[!]srcip] [[!]dstintf] [[!]dstip] [[!]serv] [[!]length]
[log = <{disabled|enabled}>] [state = <{disabled|enabled}>]
[trigger = <{None|link}>]

Parameters :
chain = <chain name>
The name of the chain which contains the rule.
[index = <number>]
The index of the rule in the chain.
[newindex = <number>]
The new index of the rule in the chain.
[name = <string>]
The name of the new rule.
[clink = <chain name>]
The name of the chain to be parsed when this rule applies.
[[!]srcintf]
The name of the source interface expression.
[[!]srcip]
The name of the source ip expression.
[[!]dstintf]
The name of the destination interface expression.
[[!]dstip]
The name of the destination ip expression.
[[!]serv]
The name of the service expression.
[[!]length]
The name of the length expression.
[log = <{disabled|enabled}>]
Disable/Enable logging when this rule applies.
[state = <{disabled|enabled}>]
Disable/Enable this rule.
[trigger = <{None|link}>]
None, link (when clink is used) or trigger name.
[srcmac = <{(HIDDEN)}>]
(HIDDEN)
[connstate = <{(HIDDEN)}>]
(HIDDEN)
upgrade
Following commands are available :

config : Display/modify upgrade settings

lastUpgradeInfo : Display last upgrade information

Following command groups are available :

debug image
upgrade config
Display/modify upgrade settings
Syntax : config [enable = <{no|yes}>] [attempt = <number>]
[trace_level = <number>] [acsContactTimeout = <number>]

Parameters :
[enable = <{no|yes}>]
Enable firmware upgrade
[attempt = <number>]
Track the number of upgrade attempts
[trace_level = <number>]
Set the trace level
[acsContactTimeout = <number>]
Set acsContactTimeout (minutes)
[systemchk = <{(HIDDEN)}>]
(HIDDEN)
upgrade debug
Following commands are available :

config : Display debug parameters

upgrade debug config
Display debug parameters
Syntax : config
upgrade image
Following commands are available :

modify : Change image parameters

list : List images
upgrade image list
List images
Syntax : list
upgrade image modify
Change image parameters
Syntax : modify [url = <quoted string>] [username = <string>]
[password = <string>] [key = <string>]

Parameters :
[url = <quoted string>]
Image location URL
[username = <string>]
HTTP authentication username
[password = <string>]
HTTP authentication password
[key = <string>]
Image identifier
upgrade lastUpgradeInfo
Display last upgrade information
Syntax : lastUpgradeInfo

Parameters :
[trigger = <{(HIDDEN)}>]
(HIDDEN)
[time = <{(HIDDEN)}>]
(HIDDEN)
[error = <{(HIDDEN)}>]
(HIDDEN)
upnp
Following commands are available :

config : Config upnp parameter(s)

flush : Flushes upnp config (i.e. to defaults)
list : List all registered devices
listmask : List all mask and security devices

Following command groups are available :

debug
upnp config
Config upnp parameter(s)
Syntax : config [maxage = <number{60-999999}>]
[writemode = <{full|natonly|readonly}>]
[safenat = <{disabled|enabled}>]
[preferredaddresses = <string>]
[upnpautosave = <{disabled|enabled}>]
[dslfautosave = <{disabled|enabled}>]
[autosavedelay = <number{30-45}>]
[onlydefault = <{disabled|enabled}>]

Parameters :
[maxage = <number{60-999999}>]
ssdp advertisements MAX-AGE (default = 1800)
[writemode = <{full|natonly|readonly}>]
Configuration access level for UPnP
[safenat = <{disabled|enabled}>]
Enable / disable check on safe nat entries (limited to own host)
[preferredaddresses = <string>]
CSV list of preferred ip addresses for UPnP (1 per lan ip-interface)
[upnpautosave = <{disabled|enabled}>]
Enable / disable upnp auto save
[dslfautosave = <{disabled|enabled}>]
Enable / disable TR-064 auto save
[autosavedelay = <number{30-45}>]
Auto save delay time (sec)
[onlydefault = <{disabled|enabled}>]
Only advertise the default WAN connection
[httpport = <{(HIDDEN)}>]
(HIDDEN)
upnp debug
Following commands are available :

traceconfig : Enable or disable tracing.

nonce : To re-generate the nonce string.
upnp debug nonce
To re-generate the nonce string.
Syntax : nonce [type = <{upnp|tr64|wfa}>]

Parameters :
[type = <{upnp|tr64|wfa}>]
Specify device type for nonce string
upnp debug traceconfig
Enable or disable tracing.
Syntax : traceconfig [level = <number>]

Parameters :
[level = <number>]
Set the tracelevel (0-2)
upnp flush
Flushes upnp config (i.e. to defaults)
Syntax : flush
upnp list
List all registered devices
Syntax : list [verbose = <number{0-2}>]

Parameters :
[verbose = <number{0-2}>]
Verbose level (default = 1)
upnp listmask
List all mask and security devices
Syntax : listmask
user
Following commands are available :

add : Add a user.

delete : Delete a user.
list : Display the users.
config : Modify the user.
flush : Flush the users.
rights : Display session rights.
user add
Add a user.
Syntax : add name = <string> password = <password> role = <>
[hash2 = <string>] [crypt = <string>] [descr = <quoted string>]
[defuser = <{disabled|enabled}>]
[defremadmin = <{disabled|enabled}>]
[deflocadmin = <{disabled|enabled}>]

Parameters :
name = <string>
User name.
password = <password>
User password.
role = <>
Role name.
[hash2 = <string>]
The MD5 hash.
[crypt = <string>]
The crypt password.
[descr = <quoted string>]
User description.
[defuser = <{disabled|enabled}>]
Set this user as the default user.
[defremadmin = <{disabled|enabled}>]
Set this user as the default remote administrator.
[deflocadmin = <{disabled|enabled}>]
Set this user as the default local administrator.
[hash3 = <{(HIDDEN)}>]
(HIDDEN)
[lm = <{(HIDDEN)}>]
(HIDDEN)
[ntlm = <{(HIDDEN)}>]
(HIDDEN)
user config
Modify the user.
Syntax : config name = <{Administrator|su|tech}> [password = <password>]
[role = <>] [descr = <quoted string>]
[defuser = <{disabled|enabled}>]
[defremadmin = <{disabled|enabled}>]
[deflocadmin = <{disabled|enabled}>]

Parameters :
name = <{Administrator|su|tech}>
User name.
[password = <password>]
User password.
[role = <>]
Role name.
[descr = <quoted string>]
User description.
[defuser = <{disabled|enabled}>]
Set this user as the default user.
[defremadmin = <{disabled|enabled}>]
Set this user as the default remote administrator.
[deflocadmin = <{disabled|enabled}>]
Set this user as the default local administrator.
user delete
Delete a user.
Syntax : delete name = <{Administrator|su|tech}>

Parameters :
name = <{Administrator|su|tech}>
User name.
user flush
Flush the users.
Syntax : flush
user list
Display the users.
Syntax : list [name = <{Administrator|su|tech}>]
[channel = <{ftp|telnet|http|mdap|serial}>]
[origin = <{lan|wan|local}>] [secure = <{disabled|enabled}>]

Parameters :
[name = <{Administrator|su|tech}>]
User name.
[channel = <{ftp|telnet|http|mdap|serial}>]
The selected channel.
[origin = <{lan|wan|local}>]
The selected origin.
[secure = <{disabled|enabled}>]
The selected security level.
user rights
Display session rights.
Syntax : rights
voice
Following commands are available :

state : show VOIP service states

config : Configure the general parameters
list : Display the general parameters

Following command groups are available :

cac calllist codec country debug

dhcp dialplan dns fax fxoport
fxsport localmap numbertranslAC numbtransl pb
portmap profile qos ringing security
services sip stats tone uamap
voice cac
Following commands are available :

config : Configure call admission control

list : Show the call admission control
voice cac config
Configure call admission control
Syntax : config [max#portsperprofile = <{one|all}>]

Parameters :
[max#portsperprofile = <{one|all}>]
The maximum number of ports that can be used with a common profile
voice cac list
Show the call admission control
Syntax : list
voice calllist
Following commands are available :

config : Configure the calllist general parameters

list : Display the calllist general parameters
voice calllist config
Configure the calllist general parameters
Syntax : config [outgcallstosamedest = <{allcalls|onlylastcall}>]
[anonymouscalls = <{include|withheld}>]
[privatecalls = <{include|withheld}>]
[incomingcallsselection = <{profile|port}>]
[outgoingcallsselection = <{profile|port}>]

Parameters :
[outgcallstosamedest = <{allcalls|onlylastcall}>]
include all outgoing calls to same destination
[anonymouscalls = <{include|withheld}>]
include anonymous calls
[privatecalls = <{include|withheld}>]
include private calls
[incomingcallsselection = <{profile|port}>]
the way incoming calls are selected
[outgoingcallsselection = <{profile|port}>]
the way outgoing calls are selected
voice calllist list
Display the calllist general parameters
Syntax : list
voice codec
Following commands are available :

list : Show the CODEC capability configuration

config : Configure a CODEC capability

Following command groups are available :

amr dynamic
voice codec amr
Following commands are available :

list : Show the AMR mode configuration

config : Enable/Disable an AMR mode
voice codec amr config
Enable/Disable an AMR mode
Syntax : config mode = <number{0-7}> [status = <{disabled|enabled}>]

Parameters :
mode = <number{0-7}>
The AMR mode
[status = <{disabled|enabled}>]
Enable or disable this mode
voice codec amr list
Show the AMR mode configuration
Syntax : list
voice codec config
Configure a CODEC capability
Syntax : config type = <{g711u|g711a|g723_1|g726_16|g726_24|g726_32|g726_40|
g729|ilbc|amr}>
[ptime = <{10|30|20}>] [ptime_g723 = <{30}>]
[ptime_ilbc = <{20|30}>] [vad = <{disabled|enabled}>]
[priority = <number{1-13}>] [status = <{disabled|enabled}>]

Parameters :
type = <{g711u|g711a|g723_1|g726_16|g726_24|g726_32|g726_40|g729|ilbc|amr}>

The codec type

[ptime = <{10|30|20}>]
The packet time
[ptime_g723 = <{30}>]
The packet time
[ptime_ilbc = <{20|30}>]
The packet time
[vad = <{disabled|enabled}>]
Enable or disable Voice Activity Detection
[priority = <number{1-13}>]
The codec capability priority
[status = <{disabled|enabled}>]
Enable or disable this capability
voice codec dynamic
Following commands are available :

list : Show the dynamic CODEC capability configuration

config : Configure a dynamic CODEC capability
voice codec dynamic config
Configure a dynamic CODEC capability
Syntax : config type = <{rfc2833|g723_1|g726_16|g726_24|g726_32|g726_40|ilbc|
amr}>
payloadtype = <number{96-128}>

Parameters :
type = <{rfc2833|g723_1|g726_16|g726_24|g726_32|g726_40|ilbc|amr}>
The codec type
payloadtype = <number{96-128}>
The payload type
voice codec dynamic list
Show the dynamic CODEC capability configuration
Syntax : list
voice codec list
Show the CODEC capability configuration
Syntax : list
voice config
Configure the general parameters
Syntax : config [autofxo = <{disabled|enabled}>]
[digitrelay = <{auto|inband|rfc2833|signalling|
forcedsignalling}>]
[click2dial_ports = <{FXS1|FXS2|all}>]
[rtp_portrange = <string>]
[sign_internal = <{external|internal}>]
[goingonhookeffect = <{endallcalls|endactivecall}>]
[static_intf = <{disabled|enabled}>]
[intf = <{loop|Internet|LocalNetwork|""}>]
[secondintf = <{loop|Internet|LocalNetwork|""}>]
[endofnumber = <{#|*|none}>] [countrycode = <number>]
[delayeddisconnect = <{enabled|disabled}>]
[delayeddisconnectoverride = <{none|INVITE_no_SDP}>]
[delayeddisconnecttimer = <number>]
[ringmuteduration = <number>]
[feature-mngt = <{internal|external}>]
[call-setup-failure-timeout = <number>]
[CCBS-invoked-timeout = <number>]
[nocallsetupmsg = <{never|unav-numb}>]
[syslogscope = <{none|all|only-stats|only-dm-events|only-msgs|
all}>]
[pstnsoftswitchover = <{enabled|disabled}>]
[no-answer-timer = <number>]

Parameters :
[autofxo = <{disabled|enabled}>]
Automatically make FXO calls when not registered
[digitrelay = <{auto|inband|rfc2833|signalling|forcedsignalling}>]
Set the digit relay mode
[click2dial_ports = <{FXS1|FXS2|all}>]
Set the click to dial port
[rtp_portrange = <string>]
The RTP port range <[startport]-[endport]>
[sign_internal = <{external|internal}>]
Signalling for local calls is kept local or external
[goingonhookeffect = <{endallcalls|endactivecall}>]
Effect on Phones Going ONHOOK(EndActiveCall|ENDALLCALLS)
[static_intf = <{disabled|enabled}>]
Use a static (configured) interface to look for the IP address or not
[intf = <{loop|Internet|LocalNetwork|""}>]
The name of a IP interface to be used for VOIP traffic, NULL string to
remove it.
[secondintf = <{loop|Internet|LocalNetwork|""}>]
The name of a backup IP interface to be used for VOIP traffic, NULL
string to remove it.
[endofnumber = <{#|*|none}>]
The end of number character for dialled number starting with a cipher
[countrycode = <number>]
Local countrycode
[delayeddisconnect = <{enabled|disabled}>]
Enable or disable the delayed disconnect feature
[delayeddisconnectoverride = <{none|INVITE_no_SDP}>]
Delayed disconnect override
[delayeddisconnecttimer = <number>]
Delayed disconnect timer (seconds)
[ringmuteduration = <number>]
Early media mute duration (in ms)
[feature-mngt = <{internal|external}>]
Feature management internal or external
[call-setup-failure-timeout = <number>]
Timeout for the callsetup failed state (in ms). 0 means timer disabled
[CCBS-invoked-timeout = <number>]
Timeout for the CCBS invoked state (in ms). 0 means timer disabled
[nocallsetupmsg = <{never|unav-numb}>]
Send call setup message
[syslogscope = <{none|all|only-stats|only-dm-events|only-msgs|all}>]
Syslog Scope
[pstnsoftswitchover = <{enabled|disabled}>]
Enable or disable PSTN Soft Switch Over
[no-answer-timer = <number>]
No answer timer
[rtp_port = <{(HIDDEN)}>]
(HIDDEN)
[rtp_portend = <{(HIDDEN)}>]
(HIDDEN)
voice country
Following commands are available :

config : Configure country

list : Show the selected country
countrylist : List available countries
voice country config
Configure country
Syntax : config country = <{etsi|argentina|australia|austria|belgium|brazil|
canada|chile|colombia|croatia|denmark|cee|france1|
france3|germany|greece|greece80|hungary|iceland|
italy|macedonia|macedonia_dtmf|mexico|netherlands|
newzealand1|newzealand2|northamerica|norway|
portugal2|portugal1|ksa|singapore|slovenia|spain|
sweden|uk}>

Parameters :
country = <{etsi|argentina|australia|austria|belgium|brazil|canada|chile|
colombia|croatia|denmark|cee|france1|france3|germany|greece|
greece80|hungary|iceland|italy|macedonia|macedonia_dtmf|mexico|
netherlands|newzealand1|newzealand2|northamerica|norway|portugal2|
portugal1|ksa|singapore|slovenia|spain|sweden|uk}>
Load this country's specific settings into the DSP
voice country countrylist
List available countries
Syntax : countrylist
voice country list
Show the selected country
Syntax : list
voice debug
Following commands are available :

exec : Execute a 'Trace & Debug' command. For qualified personnel

only.
voice debug exec
Execute a 'Trace & Debug' command. For qualified personnel only.
Syntax : exec cmd = <quoted string>

Parameters :
cmd = <quoted string>
The debug command (or help)
[transparent = <{(HIDDEN)}>]
(HIDDEN)
voice dhcp
Following commands are available :

config : Configure the DHCP parameters

list : Show the configured DHCP parameters
voice dhcp config
Configure the DHCP parameters
Syntax : config [option120effect = <{dynamic|static}>]
[option120FQDNeffectonport = <{none|0}>]
[option120FQDNeffectontransport = <{none|undefined}>]

Parameters :
[option120effect = <{dynamic|static}>]
The effect of the dynamic option 120 configuration (static|dynamic)
[option120FQDNeffectonport = <{none|0}>]
The effect of the dynamic option 120 configuration (none|0)
[option120FQDNeffectontransport = <{none|undefined}>]
The effect of the dynamic option 120 configuration (none|undefined)
voice dhcp list
Show the configured DHCP parameters
Syntax : list
voice dialplan
Following commands are available :

add : Add an entry in the dialplan

delete : Delete an entry in the dialplan
modify : Modify an entry in the dialplan
list : Display the complete dailplan
flush : Delete all user-entered dialplan entries
voice dialplan add
Add an entry in the dialplan
Syntax : add prefix = <string> defaultport = <{FXS1|FXS2|FXO|VoIP|NA}>
fallbackport = <{FXS1|FXS2|FXO|VoIP|NA}>
priority = <{NA|Low|High}> fallback = <{disabled|enabled}>
minimumdigits = <number{1-31}> maximumdigits = <number{1-31}>
posofmodify = <number{0-31}> remnumdigits = <number{0-31}>
[insert = <string>] rescan = <{no|yes}> data = <{no|yes}>
action = <{none|ROUTE_excl_eon|ROUTE_incl_eon|ROUTE_excl_eon_PSO|
ROUTE_incl_eon_PSO}>

Parameters :
prefix = <string>
The prefix, identifies this entry
defaultport = <{FXS1|FXS2|FXO|VoIP|NA}>
The default outgoing port
fallbackport = <{FXS1|FXS2|FXO|VoIP|NA}>
The fallback outgoing port
priority = <{NA|Low|High}>
The priority of the entry
fallback = <{disabled|enabled}>
The fallback mechanism status of this entry
minimumdigits = <number{1-31}>
The minimum number of digits
maximumdigits = <number{1-31}>
The maximum number of digits
posofmodify = <number{0-31}>
Startposition at which a number of digits must be removed
remnumdigits = <number{0-31}>
The number of digits that need to be removed from the complete number
[insert = <string>]
String which must be inserted at PosOfModify after removing RemNumDigits
rescan = <{no|yes}>
Rescaning of the number needed or not
data = <{no|yes}>
This entry is used for data calls or not
action = <{none|ROUTE_excl_eon|ROUTE_incl_eon|ROUTE_excl_eon_PSO|
ROUTE_incl_eon_PSO}>
Action parameter
voice dialplan delete
Delete an entry in the dialplan
Syntax : delete prefix = <{90|807|80|70|69|50|2}>

Parameters :
prefix = <{90|807|80|70|69|50|2}>
The prefix
voice dialplan flush
Delete all user-entered dialplan entries
Syntax : flush
voice dialplan list
Display the complete dailplan
Syntax : list
voice dialplan modify
Modify an entry in the dialplan
Syntax : modify prefix = <{90|807|80|70|69|50|2|*01*}> newprefix = <string>
defaultport = <{FXS1|FXS2|FXO|VoIP|NA}>
fallbackport = <{FXS1|FXS2|FXO|VoIP|NA}>
priority = <{NA|Low|High}> fallback = <{disabled|enabled}>
minimumdigits = <number{1-31}> maximumdigits = <number{1-31}>
posofmodify = <number{0-31}> remnumdigits = <number{0-31}>
[insert = <string>] rescan = <{no|yes}> data = <{no|yes}>
action = <{none|ROUTE_excl_eon|ROUTE_incl_eon|
ROUTE_excl_eon_PSO|ROUTE_incl_eon_PSO}>

Parameters :
prefix = <{90|807|80|70|69|50|2|*01*}>
The prefix
newprefix = <string>
The prefix, identifies this entry
defaultport = <{FXS1|FXS2|FXO|VoIP|NA}>
The default outgoing port
fallbackport = <{FXS1|FXS2|FXO|VoIP|NA}>
The fallback outgoing port
priority = <{NA|Low|High}>
The priority of the entry
fallback = <{disabled|enabled}>
The fallback mechanism status of this entry
minimumdigits = <number{1-31}>
The minimum number of digits
maximumdigits = <number{1-31}>
The maximum number of digits
posofmodify = <number{0-31}>
Startposition at which a number of digits must be removed
remnumdigits = <number{0-31}>
The number of digits that need to be removed from the complete number
[insert = <string>]
String which must be inserted at PosOfModify after removing RemNumDigits
rescan = <{no|yes}>
Rescaning of the number needed or not
data = <{no|yes}>
This entry is used for data calls or not
action = <{none|ROUTE_excl_eon|ROUTE_incl_eon|ROUTE_excl_eon_PSO|
ROUTE_incl_eon_PSO}>
Action parameter
voice dns
Following commands are available :

config : Configure DNS

list : Show the DNS configuration
voice dns config
Configure DNS
Syntax : config [startentry = <{first|random}>] [maxentries = <number{1-24}>]

Parameters :
[startentry = <{first|random}>]
Entry to start with in the registration procedure
[maxentries = <number{1-24}>]
Maximum nbr of used entries in a DNS response
voice dns list
Show the DNS configuration
Syntax : list
voice fax
Following commands are available :

config : Configure the fax parameters

list : Show the fax configuration
voice fax config
Configure the fax parameters
Syntax : config [detect_timeout = <number{0-120}>]
[early-detect-faxmodem = <{enabled|disabled}>]
[transport = <{inband_auto|inband_reneg|strict-inband-reneg|
t38}>]
[udptl_redun = <number{0-3}>]
[VBDcodec = <{G711A|G711U|G711A+U}>]

Parameters :
[detect_timeout = <number{0-120}>]
The time-out in seconds used to detect FAX(0 is no time-out)
[early-detect-faxmodem = <{enabled|disabled}>]
Detect fax or modem early
[transport = <{inband_auto|inband_reneg|strict-inband-reneg|t38}>]
The type of fax transport
[udptl_redun = <number{0-3}>]
The number of secondary IFP packets
[VBDcodec = <{G711A|G711U|G711A+U}>]
VBDcodec to use during fax re-invite
voice fax list
Show the fax configuration
Syntax : list
voice fxoport
Following commands are available :

config : Configure the FXO port parameters

list : Show the FXO port configuration
voice fxoport config
Configure the FXO port parameters
Syntax : config [fxodisconnect = <number{500-5000}>]
[incfxodest = <{FXS|FXS1|FXS2|all|none}>]

Parameters :
[fxodisconnect = <number{500-5000}>]
The FXO disconnect timer (in ms)
[incfxodest = <{FXS|FXS1|FXS2|all|none}>]
Select destination for incoming FXO calls
voice fxoport list
Show the FXO port configuration
Syntax : list
voice fxsport
Following commands are available :

config : Configure the FXS port parameters

list : Show the FXS port configuration
voice fxsport config
Configure the FXS port parameters
Syntax : config [widebandsupport = <{disabled|enabled}>]
[interdigit = <number{10-30000}>]
[interdigitOpen = <number{10-30000}>]
[fxs1txgain = <number{-20-20}>]
[fxs1rxgain = <number{-20-20}>]
[fxs2txgain = <number{-20-20}>]
[fxs2rxgain = <number{-20-20}>]

Parameters :
[widebandsupport = <{disabled|enabled}>]
Support wideband codecs on FXS phones
[interdigit = <number{10-30000}>]
The interdigit timer (in ms)
[interdigitOpen = <number{10-30000}>]
The closed number interdigit timer (in ms)
[fxs1txgain = <number{-20-20}>]
The FXS1 egress Dsp gain value (in db)
[fxs1rxgain = <number{-20-20}>]
The FXS1 ingress Dsp gain value (in db)
[fxs2txgain = <number{-20-20}>]
The FXS2 egress Dsp gain value (in db)
[fxs2rxgain = <number{-20-20}>]
The FXS2 ingress Dsp gain value (in db)
voice fxsport list
Show the FXS port configuration
Syntax : list
voice list
Display the general parameters
Syntax : list
voice localmap
Following commands are available :

add : Add a dialplan for local/internal calls

delete : Remove a dialplan for local/internal calls
flush : Flush all dialplan for local/internal calls
modify : Modify a dialplan for local/internal calls
list : List all dialplan info for local/internal calls

Following command groups are available :

ports
voice localmap add
Add a dialplan for local/internal calls
Syntax : add name = <quoted string> number = <string> [hidden = <{yes|no}>]

Parameters :
name = <quoted string>
The name of the local/internal call dialplan
number = <string>
The number to identify the internal call dialplan
[hidden = <{yes|no}>]
should this number be hidden in internal call list
[index = <{(HIDDEN)}>]
(HIDDEN)
voice localmap delete
Remove a dialplan for local/internal calls
Syntax : delete index = <{0|1}>

Parameters :
index = <{0|1}>
The index of the local/internal call dialplan
voice localmap flush
Flush all dialplan for local/internal calls
Syntax : flush
voice localmap list
List all dialplan info for local/internal calls
Syntax : list
voice localmap modify
Modify a dialplan for local/internal calls
Syntax : modify index = <{0|1}> [name = <quoted string>] [number = <string>]
[hidden = <{yes|no}>]

Parameters :
index = <{0|1}>
The index of the local/internal call dialplan
[name = <quoted string>]
The name of the local/internal call dialplan
[number = <string>]
The number to identify the internal call dialplan
[hidden = <{yes|no}>]
should this number be hidden in internal call list
voice localmap ports
Following commands are available :

add : Add a mapping between the localmap and a port

delete : Remove a mapping between the localmap and a port
flush : Flush all mappings between the localmap and a port
voice localmap ports add
Add a mapping between the localmap and a port
Syntax : add index = <{0|1}> voiceport = <{FXS1|FXS2}>

Parameters :
index = <{0|1}>
The index of the local/internal call dialplan
voiceport = <{FXS1|FXS2}>
The specific phone to be linked to the localmap
[portindex = <{(HIDDEN)}>]
(HIDDEN)
voice localmap ports delete
Remove a mapping between the localmap and a port
Syntax : delete index = <{0|1}> voiceport = <{FXS1|FXS2}>

Parameters :
index = <{0|1}>
The index of the local/internal call dialplan
voiceport = <{FXS1|FXS2}>
The specific phone to be linked to the localmap
voice localmap ports flush
Flush all mappings between the localmap and a port
Syntax : flush index = <{0|1}>

Parameters :
index = <{0|1}>
The index of the local/internal call dialplan
voice numbertranslAC
Following commands are available :

add : Add one number translate

delete : Delete one number translate
list : Show all number translate
flush : Flush all number translate
voice numbertranslAC add
Add one number translate
Syntax : add level = <number> areacode = <string>
[action = <{showareacode|hideareacode}>] [prefix = <string>]
[delete = <number>] [executeprefdel = <{always|insideareacode}>]

Parameters :
level = <number>
The prefix name you want to delete
areacode = <string>
Area code you want to set
[action = <{showareacode|hideareacode}>]
Show area code or not
[prefix = <string>]
Prefix you like to add before area code
[delete = <number>]
How many chars you want to delete
[executeprefdel = <{always|insideareacode}>]
When to execute prefix or delete
voice numbertranslAC delete
Delete one number translate
Syntax : delete level = <number>

Parameters :
level = <number>
The level you want to delete
voice numbertranslAC flush
Flush all number translate
Syntax : flush
voice numbertranslAC list
Show all number translate
Syntax : list
voice numbtransl
Following commands are available :

config : Configure number translation

list : Show the number translation
voice numbtransl config
Configure number translation
Syntax : config [Globalnumbpostprocess = <{disabled|enabled}>]
[pbmatchlastdigits = <number>]

Parameters :
[Globalnumbpostprocess = <{disabled|enabled}>]
Enables or disables the number postprocessing
[pbmatchlastdigits = <number>]
Set the number of digits that are taken into account to perform PhoneBook
matching
voice numbtransl list
Show the number translation
Syntax : list
voice pb
Following commands are available :

add : Add phonebook entry in the phonebook

Following command groups are available :

shortkey
voice pb add
Add phonebook entry in the phonebook
Syntax : add Lastname = <quoted string> Firstname = <quoted string>
[Business = <quoted string>] [Home = <quoted string>]
[Mobile = <quoted string>] [Other = <quoted string>]
[E-mail = <quoted string>]

Parameters :
Lastname = <quoted string>
The lastname
Firstname = <quoted string>
The firstname
[Business = <quoted string>]
The business number
[Home = <quoted string>]
The home number
[Mobile = <quoted string>]
The mobile number
[Other = <quoted string>]
Any other number
[E-mail = <quoted string>]
E-mail address
voice pb shortkey
Following commands are available :

add : Add shortkey item

delete : Delete shortkey item
modify : Modify shortkey item
list : Show all shortkeys
flush : Flush all shortkeys
voice pb shortkey add
Add shortkey item
Syntax : add shortkey = <number> number = <string> [name = <quoted string>]
enable = <{disabled|enabled}>

Parameters :
shortkey = <number>
The shortkey of the shortkey table
number = <string>
The number of the shortkey table
[name = <quoted string>]
The name of the shortkey table
enable = <{disabled|enabled}>
Enable/Disable the entry of the shortkey table
[index = <{(HIDDEN)}>]
(HIDDEN)
voice pb shortkey delete
Delete shortkey item
Syntax : delete shortkey = <number>

Parameters :
shortkey = <number>
The Shortkey of the shortkey table
voice pb shortkey flush
Flush all shortkeys
Syntax : flush
voice pb shortkey list
Show all shortkeys
Syntax : list
voice pb shortkey modify
Modify shortkey item
Syntax : modify Index = <{}> [shortkey = <number>] [number = <string>]
[name = <quoted string>] [enable = <{disabled|enabled}>]

Parameters :
Index = <{}>
The index of the shortkey you wish to modify
[shortkey = <number>]
The shortkey of the shortkey table
[number = <string>]
The number of the shortkey table
[name = <quoted string>]
The name of the shortkey table
[enable = <{disabled|enabled}>]
Enable/Disable the entry of the shortkey table
voice portmap
Following commands are available :

add : Add portmap

delete : Delete portmap
list : Show all portmaps
flush : Flush all portmap entries
voice portmap add
Add portmap
Syntax : add voiceport = <{FXS1|FXS2}> profile = <{}> [priority = <number>]

Parameters :
voiceport = <{FXS1|FXS2}>
The specific phone
profile = <{}>
The SIP URI related to this voice port
[priority = <number>]
The priority this profile has for this port
voice portmap delete
Delete portmap
Syntax : delete voiceport = <{FXS1|FXS2}> profile = <{}>

Parameters :
voiceport = <{FXS1|FXS2}>
The specific phone
profile = <{}>
The SIP URI related to this voice port
voice portmap flush
Flush all portmap entries
Syntax : flush
voice portmap list
Show all portmaps
Syntax : list voiceport = <{FXS1|FXS2}>

Parameters :
voiceport = <{FXS1|FXS2}>
The specific phone
voice profile
Following commands are available :

add : Add profile

delete : Delete profile
modify : Modify profile
list : Show all profiles
flush : Flush all profiles
voice profile add
Add profile
Syntax : add SIP_URI = <string> [username = <string>] [password = <password>]
[displayname = <quoted string>]
[voiceport = <{FXS1|FXS2|COMMON}>] [abbr = <string>]
[enable = <{disabled|enabled}>] [linename = <string>]
[internalnumber = <{no|yes}>]

Parameters :
SIP_URI = <string>
The SIP URI related to this voice port
[username = <string>]
The authentication username related to this voice port
[password = <password>]
The authentication password related to this voice port
[displayname = <quoted string>]
An alias name for the SIP_URI
[voiceport = <{FXS1|FXS2|COMMON}>]
The analogue line number
[abbr = <string>]
An abbriviated number that will be mapped to the SIP_URI
[enable = <{disabled|enabled}>]
Enable or disable this profile
[linename = <string>]
The line name to identify profile with
[internalnumber = <{no|yes}>]
Mark this profile as an internalnumber
[Index = <{(HIDDEN)}>]
(HIDDEN)
[directorynumber = <{(HIDDEN)}>]
(HIDDEN)
voice profile delete
Delete profile
Syntax : delete SIP_URI = <string>

Parameters :
SIP_URI = <string>
The SIP URI related to this voice port
voice profile flush
Flush all profiles
Syntax : flush
voice profile list
Show all profiles
Syntax : list
voice profile modify
Modify profile
Syntax : modify Index = <{}> [SIP_URI = <string>] [username = <string>]
[password = <password>] [displayname = <quoted string>]
[abbr = <string>] [enable = <{disabled|enabled}>]
[linename = <string>]

Parameters :
Index = <{}>
The index of the profile you wish to modify
[SIP_URI = <string>]
The SIP URI related to this voice port
[username = <string>]
The authentication username related to this voice port
[password = <password>]
The authentication password related to this voice port
[displayname = <quoted string>]
An alias name for the SIP_URI
[abbr = <string>]
An abbriviated number that will be mapped to the SIP_URI
[enable = <{disabled|enabled}>]
Enable or disable this profile
[linename = <string>]
The line name to identify profile with
[directorynumber = <{(HIDDEN)}>]
(HIDDEN)
voice qos
Following commands are available :

list : Show the QOS configuration

config : Configure the QOS parameters
voice qos config
Configure the QOS parameters
Syntax : config type = <{Signaling|Realtime}> qosfield = <{DSCP|precedence}>
dscp = <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41|
af42|af43|cs0|cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>
precedence = <{routine|priority|immediate|flash|flash-override|
CRITIC-ECP|internetwork-control|network-control}
or number>

Parameters :
type = <{Signaling|Realtime}>
The type of traffic that needs qos
qosfield = <{DSCP|precedence}>
The QOS field to be used
dscp = <{ef|af11|af12|af13|af21|af22|af23|af31|af32|af33|af41|af42|af43|cs0|
cs1|cs2|cs3|cs4|cs5|cs6|cs7} or number>
The DSCP value
precedence = <{routine|priority|immediate|flash|flash-override|CRITIC-ECP|
internetwork-control|network-control} or number>
The precedence value
voice qos list
Show the QOS configuration
Syntax : list
voice ringing
Following command groups are available :

descrtable eventtable patterntable

voice ringing descrtable
Following commands are available :

set : Set a specific profile for future ringing modifications

(current value = all)
add : Add a ringing description
delete : Delete a ringing description
modify : Modify ring description
list : Show all ringing descriptions
flush : Flush all ringing descriptions
voice ringing descrtable add
Add a ringing description
Syntax : add ringid = <number> status = <{disabled|enabled}>
ringname = <quoted string> [patternentryid = <number>]
[dectringentryid = <number>] maxduration = <number>
[alertinfo = <quoted string>]

Parameters :
ringid = <number>
Ring ID
status = <{disabled|enabled}>
Enable or disable this ringing
ringname = <quoted string>
Name of the ringing
[patternentryid = <number>]
Entry ID in pattern table
[dectringentryid = <number>]
DECT ringtone identifier
maxduration = <number>
Max. duration
[alertinfo = <quoted string>]
Exact content of the linked Alert-Info header
voice ringing descrtable delete
Delete a ringing description
Syntax : delete ringid = <number>

Parameters :
ringid = <number>
Ring ID
voice ringing descrtable flush
Flush all ringing descriptions
Syntax : flush
voice ringing descrtable list
Show all ringing descriptions
Syntax : list profile = <string>

Parameters :
profile = <string>
Profile on which future ringing operations must be done
voice ringing descrtable modify
Modify ring description
Syntax : modify ringid = <number> [status = <{disabled|enabled}>]
[ringname = <quoted string>] [patternentryid = <number>]
[dectringentryid = <number>] [maxduration = <number>]
[alertinfo = <quoted string>]

Parameters :
ringid = <number>
Ring ID
[status = <{disabled|enabled}>]
Enable or disable this ringing
[ringname = <quoted string>]
Name of the ringing
[patternentryid = <number>]
Entry ID in pattern table
[dectringentryid = <number>]
DECT ringtone identifier
[maxduration = <number>]
Max. duration
[alertinfo = <quoted string>]
Exact content of the linked Alert-Info header
voice ringing descrtable set
Set a specific profile for future ringing modifications (current value = all)
Syntax : set profile = <string>

Parameters :
profile = <string>
Profile on which future ringing operations must be done
voice ringing eventtable
Following commands are available :

set : Set a specific profile for future ringing modifications

(current value = all)
modify : Modify a ringing event
list : Show all ringing events
flush : Flush all ringing events
voice ringing eventtable flush
Flush all ringing events
Syntax : flush

Parameters :
voice ringing eventtable list
Show all ringing events
Syntax : list profile = <string>

Parameters :
profile = <string>
Profile on which future ringing operations must be done
voice ringing eventtable modify
Modify a ringing event
Syntax : modify eventid = <number> ringid = <number>

Parameters :
eventid = <number>
Event ID
ringid = <number>
Ring ID
voice ringing eventtable set
Set a specific profile for future ringing modifications (current value = all)
Syntax : set profile = <string>

Parameters :
profile = <string>
Profile on which future ringing operations must be done
voice ringing patterntable
Following commands are available :

set : Set a specific profile for future ringing modifications

(current value = all)
add : Add a ringing pattern
delete : Delete a ringing pattern
modify : Modify a ringing pattern
list : Show all ringing patterns
flush : Flush all ringing patterns
voice ringing patterntable add
Add a ringing pattern
Syntax : add id = <number> ringing = <{off|on}> duration = <number>
[nextentry = <number>]

Parameters :
id = <number>
ID of the ring pattern
ringing = <{off|on}>
Enable or disable this ring
duration = <number>
Duration (ms)
[nextentry = <number>]
Next pattern entry
voice ringing patterntable delete
Delete a ringing pattern
Syntax : delete id = <number>

Parameters :
id = <number>
ID of the ring pattern
voice ringing patterntable flush
Flush all ringing patterns
Syntax : flush
voice ringing patterntable list
Show all ringing patterns
Syntax : list profile = <string>

Parameters :
profile = <string>
Profile on which future ringing operations must be done
voice ringing patterntable modify
Modify a ringing pattern
Syntax : modify id = <number> [ringing = <{off|on}>] [duration = <number>]
[nextentry = <number>]

Parameters :
id = <number>
ID of the ring pattern
[ringing = <{off|on}>]
Enable or disable this ring
[duration = <number>]
Duration (ms)
[nextentry = <number>]
Next pattern entry
voice ringing patterntable set
Set a specific profile for future ringing modifications (current value = all)
Syntax : set profile = <string>

Parameters :
profile = <string>
Profile on which future ringing operations must be done
voice security
Following commands are available :

config : Configure the security parameters

list : Show the security configuration
voice security config
Configure the security parameters
Syntax : config [antispamlevel = <{none|stickyoutbproxy}>]
[mediapolicy = <{none|symmetric}>]

Parameters :
[antispamlevel = <{none|stickyoutbproxy}>]
Security level to apply on incoming SIP messages
[mediapolicy = <{none|symmetric}>]
Security level to apply on incoming media
voice security list
Show the security configuration
Syntax : list
voice services
Following commands are available :

list : Show the supplementary service configuration

config : General supplementary service configuration
servicelist : Show the supplementary service configuration
provision : Provision a supplementary service
withdraw : Withdraw a supplementary service
activate : Activate a supplementary service
deactivate : Deactivate a supplementary service
assign : Assign a servicecode to a supplementary service in standard
mode
assign_pxsc : Assign a servicecode to a supplementary service in
non_standard mode
flush : Flush all supplementary services

Following command groups are available :

soc
voice services activate
Activate a supplementary service
Syntax : activate type = <{3pty|acr|bargein|cfbs|cfnr|cfu|clip|clir|forcedFXO|
hold|mce|mwi|transfer|vmnr|waiting|warmline}>

Parameters :
type = <{3pty|acr|bargein|cfbs|cfnr|cfu|clip|clir|forcedFXO|hold|mce|mwi|
transfer|vmnr|waiting|warmline}>
The supplementary service type
[status = <{(HIDDEN)}>]
(HIDDEN)
voice services assign
Assign a servicecode to a supplementary service in standard mode
Syntax : assign type = <{3pty|acr|bargein|callreturn|ccbs|cfbs|cfnr|cfu|clip|
clir|forcedFXO|hold|internalcall|mce|mwi|transfer|vmnr|
waiting|warmline}>
servicecode = <string>

Parameters :
type = <{3pty|acr|bargein|callreturn|ccbs|cfbs|cfnr|cfu|clip|clir|forcedFXO|
hold|internalcall|mce|mwi|transfer|vmnr|waiting|warmline}>
The supplementary service type
servicecode = <string>
The service activation code
[activationcode = <{(HIDDEN)}>]
(HIDDEN)
voice services assign_pxsc
Assign a servicecode to a supplementary service in non_standard mode
Syntax : assign_pxsc type = <{3pty|acr|bargein|callreturn|ccbs|cfbs|cfnr|cfu|
clip|clir|clironcall|forcedFXO|hold|internalcall|
mce|mwi|transfer|vmnr|waiting|waitingoncall|
warmline}>
action = <{activate|deactivate|interrogate}>
action_oncall = <{activate|deactivate}>
action_cf = <{activate|deactivate|register|
activate_and_register|interrogate}>
action_act = <{activate}> [servicecode = <string>]

Parameters :
type = <{3pty|acr|bargein|callreturn|ccbs|cfbs|cfnr|cfu|clip|clir|
clironcall|forcedFXO|hold|internalcall|mce|mwi|transfer|vmnr|waiting|
waitingoncall|warmline}>
The supplementary service type
action = <{activate|deactivate|interrogate}>
The supplementary service action
action_oncall = <{activate|deactivate}>
The supplementary service action
action_cf = <{activate|deactivate|register|activate_and_register|
interrogate}>
The supplementary service action
action_act = <{activate}>
The supplementary service action
[servicecode = <string>]
The service code
[activationcode = <{(HIDDEN)}>]
(HIDDEN)
[deactivationcode = <{(HIDDEN)}>]
(HIDDEN)
[regcode = <{(HIDDEN)}>]
(HIDDEN)
[activate_and_regcode = <{(HIDDEN)}>]
(HIDDEN)
[interrogationcode = <{(HIDDEN)}>]
(HIDDEN)
voice services config
General supplementary service configuration
Syntax : config [mwi_phone = <{immediate|deferred|both}>]
[mwi_network = <{sollicited|unsollicited}>]
[prefix_servcode = <{standard|nonstandard}>]
[servcode_cmd = <{standard|nonstandard}>]
[cfu_dest = <string>] [cfnr_timer = <number{0-600}>]
[cfnr_dest = <string>] [cfbs_dest = <string>]
[hfhf_feature = <{disabled|enabled}>]
[cw_reject_persistence = <{disabled|enabled}>]
[cw_timer = <number{0-120}>]
[cw_reject_scope = <{specific|common}>]
[warm-line-timer = <number{1-60}>]
[warm-line-dest = <string>]
[aes_from_email_address = <string>]
[aes_to_email_address = <string>]
[aes_outg_smtp_server = <string>]
[vmnr_timer = <number{0-600}>]
[voice_mail_size_limit = <number>]
[transfer3ptywhenonhook = <{disabled|enabled}>]

Parameters :
[mwi_phone = <{immediate|deferred|both}>]
The way the phone reacts on a message waiting indication
[mwi_network = <{sollicited|unsollicited}>]
The way the network protocol implements the message waiting indication
service
[prefix_servcode = <{standard|nonstandard}>]
The way the service codes are assigned
[servcode_cmd = <{standard|nonstandard}>]
The way the service code command is used
[cfu_dest = <string>]
The destination for the CFU service
[cfnr_timer = <number{0-600}>]
The CFNR timer value
[cfnr_dest = <string>]
The destination for the CFNR service
[cfbs_dest = <string>]
The destination for the CFBS service
[hfhf_feature = <{disabled|enabled}>]
Enable/disable hfhf_feature
[cw_reject_persistence = <{disabled|enabled}>]
Enable/disable cw_reject_persistence
[cw_timer = <number{0-120}>]
The CW timer value
[cw_reject_scope = <{specific|common}>]
The scope of the rejection when the huntgroup is involved
[warm-line-timer = <number{1-60}>]
The Warm-line timer value
[warm-line-dest = <string>]
The destination for the Warm-line service
[aes_from_email_address = <string>]
The from email address for the AES services
[aes_to_email_address = <string>]
The to email address for the AES services
[aes_outg_smtp_server = <string>]
The FQDN or IP address of your ISPs outgoing SMTP server
[vmnr_timer = <number{0-600}>]
The VMNR timer value
[voice_mail_size_limit = <number>]
The size limit of VoiceMail
[transfer3ptywhenonhook = <{disabled|enabled}>]
Enable/disable transfer when going on hook when involved in 3pty call
voice services deactivate
Deactivate a supplementary service
Syntax : deactivate type = <{3pty|acr|bargein|cfbs|cfnr|cfu|clip|clir|
forcedFXO|hold|mce|mwi|transfer|vmnr|waiting|
warmline}>

Parameters :
voice services list
Show the supplementary service configuration
Syntax : list
voice services provision
Provision a supplementary service
Syntax : provision type = <{3pty|acr|bargein|callreturn|ccbs|cfbs|cfnr|cfu|
clip|clir|forcedFXO|hold|internalcall|mce|mwi|
transfer|vmnr|waiting|warmline}>

Parameters :
type = <{3pty|acr|bargein|callreturn|ccbs|cfbs|cfnr|cfu|clip|clir|forcedFXO|
hold|internalcall|mce|mwi|transfer|vmnr|waiting|warmline}>
The supplementary service type
[provision = <{(HIDDEN)}>]
(HIDDEN)
voice services servicelist
Show the supplementary service configuration
Syntax : servicelist
voice services soc
Following commands are available :

config : General switching order configuration

list : Show the switching order configuration
modify : Configure switching order codes
soclist : Show the switching order codes
voice services soc config
General switching order configuration
Syntax : config [Registerrecalltimer = <number{0-60}>]

Parameters :
[Registerrecalltimer = <number{0-60}>]
The Register recall timer value in seconds
voice services soc list
Show the switching order configuration
Syntax : list
voice services soc modify
Configure switching order codes
Syntax : modify function = <{HoldActiveCallAndEnableCallSetup|
NoActiveCallRetrieveHeld|Establish3Party|
DropLastPartyFrom3Party|SwitchBetweenActiveAndHeld|
SwitchBetweenActiveAndWaiting}>
SOC = <{HF|HF1|HF2|HFTO|HFTOorHF2|HF3}>

Parameters :
function = <{HoldActiveCallAndEnableCallSetup|NoActiveCallRetrieveHeld|
Establish3Party|DropLastPartyFrom3Party|
SwitchBetweenActiveAndHeld|SwitchBetweenActiveAndWaiting}>
Switching function
SOC = <{HF|HF1|HF2|HFTO|HFTOorHF2|HF3}>
Switching order code
voice services soc soclist
Show the switching order codes
Syntax : soclist
voice services withdraw
Withdraw a supplementary service
Syntax : withdraw type = <{3pty|acr|bargein|callreturn|ccbs|cfbs|cfnr|cfu|clip|
clir|forcedFXO|hold|internalcall|mce|mwi|transfer|
vmnr|waiting|warmline}>

config : Configure the SIP general parameters

list : Display the SIP general parameters

Following command groups are available :

inboundauth responsemap sdp

voice sip config
Configure the SIP general parameters
Syntax : config [useragentdomain = <string>] [primproxyaddr = <string>]
[secproxyaddr = <string>]
[proxyport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|
bgp|biff|bootpc|bootps|chargen|clearcase|daytime|
discard|dns|domain|doom|echo|exec|finger|ftp|ftp-
data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|
ldap|login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|
snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|
systat|talk|telnet|time|timed|tftp|ulistserv|
utime|uucp|uucp-rlogin|who|www-http|whoami|
xwindows} or number>]
[secproxyport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|
bgp|biff|bootpc|bootps|chargen|clearcase|
daytime|discard|dns|domain|doom|echo|exec|
finger|ftp|ftp-data|gopher|h323|httpproxy|ike|
ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|
irc-u|kerberos|ldap|login|netbios-dgm|netbios-
ns|netbios-ssn|netwall|netware-ip|new-rwho|
nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|
pop3|printer|qotd|realaudio|rip|rtelnet|rtsp|
sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-
net|sqlserv|sunrpc|syslog|systat|talk|telnet|
time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or
number>]
[primregaddr = <string>] [secregaddr = <string>]
[regport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|
biff|bootpc|bootps|chargen|clearcase|daytime|
discard|dns|domain|doom|echo|exec|finger|ftp|ftp-
data|gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|
login|netbios-dgm|netbios-ns|netbios-ssn|netwall|
netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|
pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|
rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|
sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|
telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>]
[regexpire = <number{60-86400}>]
[regexpire_Tbefore = <number{1-86400}>]
[notifier_addr = <string>]
[notifier_port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|
auth|bgp|biff|bootpc|bootps|chargen|clearcase|
daytime|discard|dns|domain|doom|echo|exec|
finger|ftp|ftp-data|gopher|h323|httpproxy|ike|
ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-
o|irc-u|kerberos|ldap|login|netbios-dgm|
netbios-ns|netbios-ssn|netwall|netware-ip|new-
rwho|nfds|nicname|nntp|ntalk|ntp|pcmail-srv|
pop2|pop3|printer|qotd|realaudio|rip|rtelnet|
rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|
sql-net|sqlserv|sunrpc|syslog|systat|talk|
telnet|time|timed|tftp|ulistserv|utime|uucp|
uucp-rlogin|who|www-http|whoami|xwindows} or
number>]
[subscribe_expire = <number{60-86400}>]
[failbehaviour = <{stop|continue}>] [CWreply = <{182|180}>]
[transport = <{undefined|UDP|TCP|TLS}>]
[rtpmapstaticPT = <{disabled|enabled}>]
[reinvite_stop_audio = <{disabled|enabled}>]
[MethodUpdate = <{disabled|enabled}>]
[PRACK = <{disabled|enabled|unsupported|supported|required}>]
[clirformat = <{standard|nonstandard}>]
[DTMF*#inINFO = <{*#|1011}>]
[clip_consider_displayname = <{no|yes}>]
[sdp_ptime = <{10|20|30|notsent}>]
[replace# = <{enabled|disabled}>]
[symmetriccodec = <{enabled|disabled}>]
[reinvite_at_cgfax_detect = <{enabled|disabled}>]
[SIPURI_port = <{enabled|disabled}>]
[rport = <{enabled|disabled}>] [SDP_username = <string>]
[t38portincrement = <number{0-65535}>]
[ping = <number{0-86400}>] [min-se = <number{0-604800}>]
[session-expires = <number{0-604800}>]
[expires = <number{0-3600}>]
[register-backoff-timer = <number{0-86400}>]
[mwi-resubscribe-delay = <number{0-86400}>]
[stickyoutbproxy = <{disabled|enabled}>]
[privacy = <{ignore|strict|loose}>]
[SDP_username_per_UA = <{disabled|enabled}>]
[stop_register_on_403 = <{disabled|enabled}>]
[403waiting = <number{0-86400}>]
[distinct_t38_port = <{disabled|enabled}>]
[transport_in_contact = <{disabled|enabled}>]
[401407waiting = <number{0-86400}>]
[400503waiting = <number{0-86400}>]
[other4xx5xx6xxwaiting = <number{0-86400}>]
[timer_f_expired_waiting = <number{0-86400}>]
[stop_register_on_408 = <{disabled|enabled}>]
[stop_register_on_timerfexpired = <{disabled|enabled}>]
[provisional_timer = <number{0-3600}>]
[timert1 = <number{1-1048575}>]
[timert2 = <number{1-1048575}>]
[timertb = <number{1-1048575}>]
[timertf = <number{1-1048575}>]
[response420 = <{disabled|enabled}>]
[realm = <quoted string>] [realmcheck = <{disabled|enabled}>]
[regpersistency = <{disabled|permanent}>]
[no-answer-reply = <{480|486}>] [CWrejectreply = <{480|486}>]
[SIPURIsupport = <{legacy|TR104}>]
[earlymedia = <{enable|disable|disable180withoutsdp}>]

Parameters :
[useragentdomain = <string>]
User Agent domain
[primproxyaddr = <string>]
Primary outbound proxy address or FQDN
[secproxyaddr = <string>]
Secondary outbound proxy address or FQDN
[proxyport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|
exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|
imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|
netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|
nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|
sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|telnet|time|
timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|
whoami|xwindows} or number>]
Primary outbound proxy port
[secproxyport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain|
doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|
ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|
kerberos|ldap|login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|
pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet|
rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|
sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|
ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami|
xwindows} or number>]
Secondary outbound proxy port
[primregaddr = <string>]
Primary registrar address or domain
[secregaddr = <string>]
Secondary registrar address or domain
[regport = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|
exec|finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|
imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|
netbios-dgm|netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|
nfds|nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|
sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|telnet|time|
timed|tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami|
xwindows} or number>]
Registrar port
[regexpire = <number{60-86400}>]
The registration expire time
[regexpire_Tbefore = <number{1-86400}>]
Time to send new registration request before registration expires
[notifier_addr = <string>]
Notifier address or FQDN used for MWI
[notifier_port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain|
doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|
ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|
kerberos|ldap|login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|
pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet|
rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|
sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|
ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami|
xwindows} or number>]
Notifier port used for MWI
[subscribe_expire = <number{60-86400}>]
The subscription expire time
[failbehaviour = <{stop|continue}>]
Behaviour on failed INVITE: re-register (stop) or use DNS logic
(continue)
[CWreply = <{182|180}>]
The reply to be sent for a waiting call (180/182)
[transport = <{undefined|UDP|TCP|TLS}>]
The transport type
[rtpmapstaticPT = <{disabled|enabled}>]
Enable or disable adding RTP map i.c.o. static PT
[reinvite_stop_audio = <{disabled|enabled}>]
Explicitly stop audio stream in the SDP when sending a re-invite
[MethodUpdate = <{disabled|enabled}>]
Enable or disable Update Method
[PRACK = <{disabled|enabled|unsupported|supported|required}>]
No suppport , support or required provisional responses
[clirformat = <{standard|nonstandard}>]
The clir format
[DTMF*#inINFO = <{*#|1011}>]
Format used for */# in INFO method
[clip_consider_displayname = <{no|yes}>]
Consider the displayname for CLIP or not
[sdp_ptime = <{10|20|30|notsent}>]
The packet time used in the SDP message
[replace# = <{enabled|disabled}>]
Enable or disable the # in INVITE to be replaced by %23
[symmetriccodec = <{enabled|disabled}>]
Enable or disable symmetric codecs
[reinvite_at_cgfax_detect = <{enabled|disabled}>]
Send re_invite when calling fax is detected
[SIPURI_port = <{enabled|disabled}>]
Enable or disable the SIPURI port
[rport = <{enabled|disabled}>]
Enable or disable the parameter rport
[SDP_username = <string>]
SDP user name
[t38portincrement = <number{0-65535}>]
Offset of T38 port number vs RTP port number.
[ping = <number{0-86400}>]
Time between two keepalive ping requests.
[min-se = <number{0-604800}>]
The minimum session expires timer.
[session-expires = <number{0-604800}>]
The session expires timer.
[expires = <number{0-3600}>]
The INVITE expires timer.
[register-backoff-timer = <number{0-86400}>]
Fixed backoff timer in registration procedure
[mwi-resubscribe-delay = <number{0-86400}>]
Delay between 2 un-answered MWI subscribe requests
[stickyoutbproxy = <{disabled|enabled}>]
Outband proxy lock over transactions
[privacy = <{ignore|strict|loose}>]
The privacy type can be ignore, strict or loose.
[SDP_username_per_UA = <{disabled|enabled}>]
SDP user name per ua
[stop_register_on_403 = <{disabled|enabled}>]
Stop register on 403
[403waiting = <number{0-86400}>]
Time in sec. before retrying after a 403 response
[distinct_t38_port = <{disabled|enabled}>]
Used distinct port for T38
[transport_in_contact = <{disabled|enabled}>]
Transporttype in contact header
[401407waiting = <number{0-86400}>]
Time in sec. before a new registration (if 0, stops)
[400503waiting = <number{0-86400}>]
Time in sec. before a new registration attempt (0 = no wait)
[other4xx5xx6xxwaiting = <number{0-86400}>]
Time in sec. before retrying after a 4xx/5xx/6xx resp.
[timer_f_expired_waiting = <number{0-86400}>]
Time in sec. before retrying after timer f expired
[stop_register_on_408 = <{disabled|enabled}>]
Stop register on 408
[stop_register_on_timerfexpired = <{disabled|enabled}>]
Stop register on Timer F expired
[provisional_timer = <number{0-3600}>]
Set provisional timer
[timert1 = <number{1-1048575}>]
The T1 expires timer.
[timert2 = <number{1-1048575}>]
The T2 expires timer.
[timertb = <number{1-1048575}>]
The Timer B expires timer.
[timertf = <number{1-1048575}>]
The Timer F expires timer.
[response420 = <{disabled|enabled}>]
Enable or disable sip 420 bad extension response when receiving bad
extensions
[realm = <quoted string>]
Realm to be used in outbound and inbound authentication
[realmcheck = <{disabled|enabled}>]
Should realm be checked on authentication
[regpersistency = <{disabled|permanent}>]
number of times UA registration stays with the last known good proxy
address. <disabled|permanent> or <value>.
[no-answer-reply = <{480|486}>]
No answer reply
[CWrejectreply = <{480|486}>]
CW reject reply
[SIPURIsupport = <{legacy|TR104}>]
SIPURI support legacy or TR104
[earlymedia = <{enable|disable|disable180withoutsdp}>]
Set the early media mode
[ringtoneat183 = <{(HIDDEN)}>]
(HIDDEN)
voice sip inboundauth
Following commands are available :

config : Configure which methods should be authenticated

list : List the methods
voice sip inboundauth config
Configure which methods should be authenticated
Syntax : config [noncelifetime = <number{1-86400}>]
[BYE = <{disabled|enabled}>] [INFO = <{disabled|enabled}>]
[INVITE = <{disabled|enabled}>]
[NOTIFY = <{disabled|enabled}>]
[OPTIONS = <{disabled|enabled}>]
[PING = <{disabled|enabled}>] [PRACK = <{disabled|enabled}>]
[REFER = <{disabled|enabled}>]
[SUBSCRIBE = <{disabled|enabled}>]
[UPDATE = <{disabled|enabled}>]

Parameters :
[noncelifetime = <number{1-86400}>]
maximum lifetime of a nonce
[BYE = <{disabled|enabled}>]

[INFO = <{disabled|enabled}>]

[INVITE = <{disabled|enabled}>]

[NOTIFY = <{disabled|enabled}>]

[OPTIONS = <{disabled|enabled}>]

[PING = <{disabled|enabled}>]

[PRACK = <{disabled|enabled}>]

[REFER = <{disabled|enabled}>]

[SUBSCRIBE = <{disabled|enabled}>]

[UPDATE = <{disabled|enabled}>]
voice sip inboundauth list
List the methods
Syntax : list
voice sip list
Display the SIP general parameters
Syntax : list
voice sip responsemap
Following commands are available :

add : Add a SIP response

delete : Delete a SIP response
modify : Modify a SIP response
list : Show all SIP responses
flush : Flush all SIP responses
voice sip responsemap add
Add a SIP response
Syntax : add responsecode = <string>
tone = <{dial|none|remotecallhold|callhold|remotecallwaiting|
callwaiting|rejection|confirmation|release|warning|
congestion|busy|ringback|mwi|specialdial|stutterdial|
bargein}>
[textmessage = <quoted string>]

Parameters :
responsecode = <string>
SIP Response Code
tone = <{dial|none|remotecallhold|callhold|remotecallwaiting|callwaiting|
rejection|confirmation|release|warning|congestion|busy|ringback|mwi|
specialdial|stutterdial|bargein}>
Tone to be played
[textmessage = <quoted string>]
Text message to display
voice sip responsemap delete
Delete a SIP response
Syntax : delete responsecode = <{1xx|180|181|182|183|2xx|3xx|4xx|486|5xx|6xx}>

Parameters :
responsecode = <{1xx|180|181|182|183|2xx|3xx|4xx|486|5xx|6xx}>
SIP Response Code
voice sip responsemap flush
Flush all SIP responses
Syntax : flush
voice sip responsemap list
Show all SIP responses
Syntax : list
voice sip responsemap modify
Modify a SIP response
Syntax : modify responsecode = <{1xx|180|181|182|183|2xx|3xx|4xx|486|5xx|6xx}>

[tone = <{dial|none|remotecallhold|callhold|remotecallwaiting|
callwaiting|rejection|confirmation|release|warning|
congestion|busy|ringback|mwi|specialdial|stutterdial|
bargein}>]
[textmessage = <quoted string>]

Parameters :
responsecode = <{1xx|180|181|182|183|2xx|3xx|4xx|486|5xx|6xx}>
SIP Response Code
[tone = <{dial|none|remotecallhold|callhold|remotecallwaiting|callwaiting|
rejection|confirmation|release|warning|congestion|busy|ringback|mwi|
specialdial|stutterdial|bargein}>]
Tone to be played
[textmessage = <quoted string>]
Text message to display
voice sip sdp
Following commands are available :

config : Configure the SDP general parameters

list : List the SDP general parameters

Following command groups are available :

annexa annexb silencesupp vad

voice sip sdp annexa
Following commands are available :

config : Configure the SDP AnnexA parameters

voice sip sdp annexa config
Configure the SDP AnnexA parameters
Syntax : config [scopeadd = <{g723-1}>] [scopedel = <{g723-1}>]

Parameters :
[scopeadd = <{g723-1}>]
Scope add list
[scopedel = <{g723-1}>]
Scope del list
voice sip sdp annexb
Following commands are available :

config : Configure the SDP annexb parameters

voice sip sdp annexb config
Configure the SDP annexb parameters
Syntax : config [scopeadd = <{g729}>] [scopedel = <{g729}>]

Parameters :
[scopeadd = <{g729}>]
Scope add list
[scopedel = <{g729}>]
Scope del list
voice sip sdp config
Configure the SDP general parameters
Syntax : config [remotesupportsilencesupp = <{on-specified|off-not-
specified}>]
[callholddirection = <{sendonly|inactive}>]
[versioncheck = <{no|yes}>]

Parameters :
[remotesupportsilencesupp = <{on-specified|off-not-specified}>]
Remote support SilenceSupp
[callholddirection = <{sendonly|inactive}>]
Call Hold Direction
[versioncheck = <{no|yes}>]
Check version in SDP header
voice sip sdp list
List the SDP general parameters
Syntax : list
voice sip sdp silencesupp
Following commands are available :

config : Configure the SDP Silence Supp parameters

voice sip sdp silencesupp config
Configure the SDP Silence Supp parameters
Syntax : config [scopeadd = <{g711|g726|g723-1|g729}>]
[scopedel = <{g711|g726|g723-1|g729}>]
[priority = <{off|on}>]

Parameters :
[scopeadd = <{g711|g726|g723-1|g729}>]
Scope add list
[scopedel = <{g711|g726|g723-1|g729}>]
Scope del list
[priority = <{off|on}>]
silenceSupp priority
voice sip sdp vad
Following commands are available :

config : Configure the SDP Vad parameters

voice sip sdp vad config
Configure the SDP Vad parameters
Syntax : config [scopeadd = <{g711|g726}>] [scopedel = <{g711|g726}>]

Parameters :
[scopeadd = <{g711|g726}>]
Scope add list
[scopedel = <{g711|g726}>]
Scope del list
[scope = <{(HIDDEN)}>]
(HIDDEN)
voice state
show VOIP service states
Syntax : state
voice stats
Following commands are available :

list : Show voice statistics

reset : Reset voice statistics
voice stats list
Show voice statistics
Syntax : list voiceport = <{FXS1|FXS2|all}> type = <{detailed|generic|all}>

Parameters :
voiceport = <{FXS1|FXS2|all}>
The voice port used to get/reset the statistics
type = <{detailed|generic|all}>
Type of statistics to be listed/reset
[TotalInCalls = <{(HIDDEN)}>]
(HIDDEN)
[SuccessInCalls = <{(HIDDEN)}>]
(HIDDEN)
[MissedInCalls = <{(HIDDEN)}>]
(HIDDEN)
[TotalOutCalls = <{(HIDDEN)}>]
(HIDDEN)
[SuccessOutCalls = <{(HIDDEN)}>]
(HIDDEN)
[FailedOutCalls = <{(HIDDEN)}>]
(HIDDEN)
voice stats reset
Reset voice statistics
Syntax : reset voiceport = <{FXS1|FXS2|all}> type = <{detailed|generic|all}>

descrtable eventtable patterntable

voice tone descrtable
Following commands are available :

add : Add tone description

delete : Delete tone description
modify : Modify tone description
list : Show all tone descriptions
flush : Flush all tone descriptions
voice tone descrtable add
Add tone description
Syntax : add tone = <string> status = <{disabled|enabled}> delay = <number>
[patternentryid = <number>] [file = <string>]
[filerepeat = <number>] text = <quoted string>
[maxduration = <number>] [nexttone = <string>]
repeatafter = <number>

Parameters :
tone = <string>
Name of the tone
status = <{disabled|enabled}>
Enable or disable this tone
delay = <number>
Delay (in ms)
[patternentryid = <number>]
Entry ID in pattern table
[file = <string>]
Audio file name
[filerepeat = <number>]
File repetitions
text = <quoted string>
Text to display on the phone
[maxduration = <number>]
Max. duration
[nexttone = <string>]
Name of the tone
repeatafter = <number>
Time after which the tone must be repeated (in ms)
voice tone descrtable delete
Delete tone description
Syntax : delete tone = <{bargein}>

Parameters :
tone = <{bargein}>
Name of the tone
voice tone descrtable flush
Flush all tone descriptions
Syntax : flush
voice tone descrtable list
Show all tone descriptions
Syntax : list
voice tone descrtable modify
Modify tone description
Syntax : modify tone = <{dial|none|remotecallhold|callhold|remotecallwaiting|
callwaiting|rejection|confirmation|release|warning|
congestion|busy|ringback|mwi|specialdial|stutterdial|
bargein}>
[status = <{disabled|enabled}>] [delay = <number>]
[patternentryid = <number>] [file = <string>]
[filerepeat = <number>] [text = <string>]
[maxduration = <number>] [nexttone = <string>]
[repeatafter = <number>]

Parameters :
tone = <{dial|none|remotecallhold|callhold|remotecallwaiting|callwaiting|
rejection|confirmation|release|warning|congestion|busy|ringback|mwi|
specialdial|stutterdial|bargein}>
Name of the tone
[status = <{disabled|enabled}>]
Enable or disable this tone
[delay = <number>]
Delay (in ms)
[patternentryid = <number>]
Entry ID in pattern table
[file = <string>]
Audio file name
[filerepeat = <number>]
File repetitions
[text = <string>]
Text to display on the phone
[maxduration = <number>]
Max. duration
[nexttone = <string>]
Name of the tone
[repeatafter = <number>]
Time after which the tone must be repeated (in ms)
voice tone eventtable
Following commands are available :

modify : Modify tone event

list : Show all tone events
flush : Flush all tone events
voice tone eventtable flush
Flush all tone events
Syntax : flush
voice tone eventtable list
Show all tone events
Syntax : list
voice tone eventtable modify
Modify tone event
Syntax : modify eventid = <{1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|20|
101|102|103|104|105|106|107|108|201|202|203|204|205|
301|302|305|401|402|403|404|405|406|407|408|409|410|
501|502|503|999}>
tone = <{dial|none|remotecallhold|callhold|remotecallwaiting|
callwaiting|rejection|confirmation|release|warning|
congestion|busy|ringback|mwi|specialdial|stutterdial|
bargein}>

Parameters :
eventid = <{1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|20|101|102|103|
104|105|106|107|108|201|202|203|204|205|301|302|305|401|402|403|
404|405|406|407|408|409|410|501|502|503|999}>
Event ID
tone = <{dial|none|remotecallhold|callhold|remotecallwaiting|callwaiting|
rejection|confirmation|release|warning|congestion|busy|ringback|mwi|
specialdial|stutterdial|bargein}>
Tone to play for this event
voice tone patterntable
Following commands are available :

add : Add tone pattern

delete : Delete tone pattern
modify : Modify tone pattern
list : Show all tone patterns
flush : Flush all tone patterns
voice tone patterntable add
Add tone pattern
Syntax : add id = <number> tone = <{off|on}> [freq1 = <number>]
[power1 = <number>] [freq2 = <number>] [power2 = <number>]
[freq3 = <number>] [power3 = <number>] [freq4 = <number>]
[power4 = <number>] [duration = <number>] [nextentry = <number>]
[maxloops = <number>] [nextentryafterloops = <number>]

Parameters :
id = <number>
ID of the tone pattern
tone = <{off|on}>
Enable or disable this tone
[freq1 = <number>]
Frequency 1
[power1 = <number>]
Power 1
[freq2 = <number>]
Frequency 2
[power2 = <number>]
Power 2
[freq3 = <number>]
Frequency 3
[power3 = <number>]
Power 3
[freq4 = <number>]
Frequency 4
[power4 = <number>]
Power 4
[duration = <number>]
Duration (ms)
[nextentry = <number>]
Next pattern entry
[maxloops = <number>]
Max loops
[nextentryafterloops = <number>]
Next entry after loops
voice tone patterntable delete
Delete tone pattern
Syntax : delete id = <{1|2|11|12|13|21|22|31|41|42|51|61|62|63|71|72|81|82|83|
84|91|92|101|102|103|104|111|112|121|131|132|141|142|151|
161|32|200|201|202|203|250|251|260|261|300|301}>
[endentryid = <{1|2|11|12|13|21|22|31|41|42|51|61|62|63|71|72|
81|82|83|84|91|92|101|102|103|104|111|112|121|
131|132|141|142|151|161|32|200|201|202|203|250|
251|260|261|300|301}>]

Parameters :
id = <{1|2|11|12|13|21|22|31|41|42|51|61|62|63|71|72|81|82|83|84|91|92|101|
102|103|104|111|112|121|131|132|141|142|151|161|32|200|201|202|203|250|
251|260|261|300|301}>
ID of the tone pattern
[endentryid = <{1|2|11|12|13|21|22|31|41|42|51|61|62|63|71|72|81|82|83|84|
91|92|101|102|103|104|111|112|121|131|132|141|142|151|161|32|
200|201|202|203|250|251|260|261|300|301}>]
ID of the tone pattern
voice tone patterntable flush
Flush all tone patterns
Syntax : flush
voice tone patterntable list
Show all tone patterns
Syntax : list
voice tone patterntable modify
Modify tone pattern
Syntax : modify id = <{1|2|11|12|13|21|22|31|41|42|51|61|62|63|71|72|81|82|83|
84|91|92|101|102|103|104|111|112|121|131|132|141|142|151|
161|32|200|201|202|203|250|251|260|261|300|301}>
[tone = <{off|on}>] [freq1 = <number>] [power1 = <number>]
[freq2 = <number>] [power2 = <number>] [freq3 = <number>]
[power3 = <number>] [freq4 = <number>] [power4 = <number>]
[duration = <number>] [nextentry = <number>]
[maxloops = <number>] [nextentryafterloops = <number>]

Parameters :
id = <{1|2|11|12|13|21|22|31|41|42|51|61|62|63|71|72|81|82|83|84|91|92|101|
102|103|104|111|112|121|131|132|141|142|151|161|32|200|201|202|203|250|
251|260|261|300|301}>
ID of the tone pattern
[tone = <{off|on}>]
Enable or disable this tone
[freq1 = <number>]
Frequency 1
[power1 = <number>]
Power 1
[freq2 = <number>]
Frequency 2
[power2 = <number>]
Power 2
[freq3 = <number>]
Frequency 3
[power3 = <number>]
Power 3
[freq4 = <number>]
Frequency 4
[power4 = <number>]
Power 4
[duration = <number>]
Duration (ms)
[nextentry = <number>]
Next pattern entry
[maxloops = <number>]
Max loops
[nextentryafterloops = <number>]
Next entry after loops
voice uamap
Following commands are available :

add : Add uamap

delete : Delete uamap
list : Show all uamaps
flush : Flush all uamap entries
voice uamap add
Add uamap
Syntax : add profile = <{}> voiceport = <{FXS1|FXS2}>

Parameters :
profile = <{}>
The SIP URI related to this voice port
voiceport = <{FXS1|FXS2}>
The specific phone
voice uamap delete
Delete uamap
Syntax : delete profile = <{}> voiceport = <{FXS1|FXS2}>

Parameters :
profile = <{}>
The SIP URI related to this voice port
voiceport = <{FXS1|FXS2}>
The specific phone
voice uamap flush
Flush all uamap entries
Syntax : flush
voice uamap list
Show all uamaps
Syntax : list [profile = <{}>]

Parameters :
[profile = <{}>]
User Agent index
wansensing
Following commands are available :

config : Configure parameters

flush : Clean configuration
list : Display parameters
requestmode : Request to enter certain mode

Following command groups are available :

debug mode
wansensing config
Configure parameters
Syntax : config [state = <{disabled|enabled}>] [errorinterval = <number>]
[errorscript = <string>]

Parameters :
[state = <{disabled|enabled}>]
Enable/disable
[errorinterval = <number>]
Error interval value
[errorscript = <string>]
Error script name
wansensing debug
Following commands are available :

traceconfig : Tracing settings

wansensing debug traceconfig
Tracing settings
Syntax : traceconfig [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/disable
wansensing flush
Clean configuration
Syntax : flush
wansensing list
Display parameters
Syntax : list
wansensing mode
Following commands are available :

list : List all modes

add : Add mode
delete : Delete mode
wansensing mode add
Add mode
Syntax : add name = <string> maininterval = <number> scriptname = <string>
[redirectgui = <{disabled|enabled}>]

Parameters :
name = <string>
Mode name
maininterval = <number>
Main interval value
scriptname = <string>
Script name
[redirectgui = <{disabled|enabled}>]
Redirect GUI
wansensing mode delete
Delete mode
Syntax : delete name = <string>

Parameters :
name = <string>
Mode name
wansensing mode list
List all modes
Syntax : list
wansensing requestmode
Request to enter certain mode
Syntax : requestmode mode = <string>

Parameters :
mode = <string>
Mode to enter (its name)
webserver
Following command groups are available :

ssl
webserver ssl
Following command groups are available :

commonname
webserver ssl commonname
Following commands are available :

add : Add an CommonName

delete : Delete an option.
list : List all options.
webserver ssl commonname add
Add an CommonName
Syntax : add commonname = <string>

Parameters :
commonname = <string>
CommonName
webserver ssl commonname delete
Delete an option.
Syntax : delete id = <string>

Parameters :
id = <string>
id
webserver ssl commonname list
List all options.
Syntax : list
wireless
Following commands are available :

radio : Configures radio settings.

reset : Reset Wireless interface settings to defaults

Following command groups are available :

acs debug macacl mssid qos

stations wps
wireless acs
Following commands are available :

config : ACS configuration

scanhistory : ACS scanhistory

Following command groups are available :

debug
wireless acs config
ACS configuration
Syntax : config [state = <{disabled|enabled}>] [glitchthreshold = <number>]
[ccathreshold = <number>] [channelscantime = <number>]
[failiteration = <number>] [maxiteration = <number>]
[lockoutperiod = <number>] [periodicscantime = <number>]
[radio_id = <number{0-9999}>]
[scanmode = <{disabled|detect|detect+act}>]
[autoscanreport = <{no|yes}>]

Parameters :
[state = <{disabled|enabled}>]
[glitchthreshold = <number>]
ACS glitsch threshold
[ccathreshold = <number>]
ACS cca threshold
[channelscantime = <number>]
ACS channelscantime
[failiteration = <number>]
ACS failiteration
[maxiteration = <number>]
ACS maxiteration
[lockoutperiod = <number>]
ACS lockout period
[periodicscantime = <number>]
ACS periodic scan
[radio_id = <number{0-9999}>]
radio
[scanmode = <{disabled|detect|detect+act}>]
ACS scan mode
[autoscanreport = <{no|yes}>]
ACS auto scan report generation
wireless acs debug
Following commands are available :

rescan : ACS perform automatic channel selection

scan : ACS netowrk scan
scanreport : ACS scanresults
triggerdump : driver detailed counter stats
wireless acs debug rescan
ACS perform automatic channel selection
Syntax : rescan [radio_id = <number{0-9999}>]

Parameters :
[radio_id = <number{0-9999}>]
radio
wireless acs debug scan
ACS netowrk scan
Syntax : scan [radio_id = <number{0-9999}>]

Parameters :
[radio_id = <number{0-9999}>]
radio
wireless acs debug scanreport
ACS scanresults
Syntax : scanreport [radio_id = <number{0-9999}>]

Parameters :
[radio_id = <number{0-9999}>]
radio
wireless acs debug triggerdump
driver detailed counter stats
Syntax : triggerdump [radio_id = <number{0-9999}>]

Parameters :
[radio_id = <number{0-9999}>]
radio
wireless acs scanhistory
ACS scanhistory
Syntax : scanhistory [radio_id = <number{0-9999}>]

Parameters :
[radio_id = <number{0-9999}>]
radio
wireless debug
Following commands are available :

stats : Transfer statistics

[HIDDEN]wireless debug hwdump
Shows the settings in hw
Syntax : hwdump
wireless debug stats
Transfer statistics
Syntax : stats
[HIDDEN]wireless eco
Following commands are available :

config : ECO configuration

dump : ECO dump config
suspend : ECO suspend
resume : ECO resume
traceconfig : ECO trace
stats : ECO stats
wireless eco config
ECO configuration
Syntax : config [state = <{enabled|disabled}>] [ton = <number{4-600}>]
[toff = <number{4-600}>] [text = <number{2-600}>]
[slowradiotoggle = <{disabled|enabled}>]
[fastradiotoggle = <{disabled|enabled}>]
[singlerxchain = <{disabled|enabled}>]
[radio_id = <number{0-9999}>]

Parameters :
[state = <{enabled|disabled}>]
ECO SM configuration
[ton = <number{4-600}>]
ton
[toff = <number{4-600}>]
ton
[text = <number{2-600}>]
text
[slowradiotoggle = <{disabled|enabled}>]
Slow radio toggling
[fastradiotoggle = <{disabled|enabled}>]
Fast radio toggling
[singlerxchain = <{disabled|enabled}>]
Use single rx chain
[radio_id = <number{0-9999}>]
radio
wireless eco dump
ECO dump config
Syntax : dump [radio_id = <number{0-9999}>]

Parameters :
[radio_id = <number{0-9999}>]
radio
wireless eco resume
ECO resume
Syntax : resume [radio_id = <number{0-9999}>]

Parameters :
[radio_id = <number{0-9999}>]
radio
wireless eco stats
ECO stats
Syntax : stats [radio_id = <number{0-9999}>]

Parameters :
[radio_id = <number{0-9999}>]
radio
wireless eco suspend
ECO suspend
Syntax : suspend [radio_id = <number{0-9999}>]

Parameters :
[radio_id = <number{0-9999}>]
radio
wireless eco traceconfig
ECO trace
Syntax : traceconfig smtrace = <{disabled|enabled}>
[radio_id = <number{0-9999}>]

Parameters :
smtrace = <{disabled|enabled}>
tracing
[radio_id = <number{0-9999}>]
radio
[HIDDEN]wireless flush
Flush all wireless dynamic contextes
Syntax : flush
[HIDDEN]wireless ifconfig
Configures wireless settings.
Syntax : ifconfig [state = <{enabled|disabled}>]
[channel = <{auto|1|2|3|4|5|6|7|8|9|10|11|12|13}>]
[ssid = <quoted string>] [any = <{enabled|disabled}>]
[interop = <{802.11b/g|802.11b/g/n}>]
[frameburst = <{disabled|enabled}>]

Parameters :
[state = <{enabled|disabled}>]
Interface operational status of wireless access point
[channel = <{auto|1|2|3|4|5|6|7|8|9|10|11|12|13}>]
Communication channel number
[ssid = <quoted string>]
SSID
[any = <{enabled|disabled}>]
Make SSID public
[interop = <{802.11b/g|802.11b/g/n}>]
Interoperability mode
[frameburst = <{disabled|enabled}>]
Framebursting
[rts = <{(HIDDEN)}>]
(HIDDEN)
[protection = <{(HIDDEN)}>]
(HIDDEN)
[protmode = <{(HIDDEN)}>]
(HIDDEN)
[prottrigger = <{(HIDDEN)}>]
(HIDDEN)
[shortslot = <{(HIDDEN)}>]
(HIDDEN)
[locale = <{(HIDDEN)}>]
(HIDDEN)
[country = <{(HIDDEN)}>]
(HIDDEN)
[rateset = <{(HIDDEN)}>]
(HIDDEN)
[dtim = <{(HIDDEN)}>]
(HIDDEN)
[flags = <{(HIDDEN)}>]
(HIDDEN)
[srl = <{(HIDDEN)}>]
(HIDDEN)
[lrl = <{(HIDDEN)}>]
(HIDDEN)
[frameaggregation = <{(HIDDEN)}>]
(HIDDEN)
wireless macacl
Following commands are available :

config : Access Control List configuration

register : Start a registration process (only for register mode)
add : Add an ACL MAC entry
modify : Modify an ACL entry
delete : Delete an ACL MAC entry
list : Shows a list of all configured ACL entries
flush : Flushes ACL entries
wireless macacl add
Add an ACL MAC entry
Syntax : add [ssid_id = <number{0-9999}>] [radio_id = <number{0-9999}>]
hwaddr = <hardware-address> permission = <{allow|deny}>
[name = <quoted string>]

Parameters :
[ssid_id = <number{0-9999}>]
ssid id
[radio_id = <number{0-9999}>]
radio
hwaddr = <hardware-address>
The Ethernet MAC address of the ACL entry
permission = <{allow|deny}>
The action to be performed on ACL entry
[name = <quoted string>]
The name of the station
wireless macacl config
Access Control List configuration
Syntax : config [ssid_id = <number{0-9999}>] [radio_id = <number{0-9999}>]
[control = <{lock|unlock|register}>]
[regtime = <number{15-3600}>]

Parameters :
[ssid_id = <number{0-9999}>]
ssid id
[radio_id = <number{0-9999}>]
radio
[control = <{lock|unlock|register}>]
Access Control List mode
[regtime = <number{15-3600}>]
Registration time
wireless macacl delete
Delete an ACL MAC entry
Syntax : delete [ssid_id = <number{0-9999}>] [radio_id = <number{0-9999}>]
hwaddr = <hardware-address>

Parameters :
[ssid_id = <number{0-9999}>]
ssid id
[radio_id = <number{0-9999}>]
radio
hwaddr = <hardware-address>
hardware address of the ACL entry
wireless macacl flush
Flushes ACL entries
Syntax : flush [ssid_id = <number{0-9999}>] [radio_id = <number{0-9999}>]
proceed = <{disabled|enabled}>

Parameters :
[ssid_id = <number{0-9999}>]
ssid id
[radio_id = <number{0-9999}>]
radio
proceed = <{disabled|enabled}>
Confirmation required
wireless macacl list
Shows a list of all configured ACL entries
Syntax : list [ssid_id = <number{0-9999}>] [radio_id = <number{0-9999}>]

Parameters :
[ssid_id = <number{0-9999}>]
ssid id
[radio_id = <number{0-9999}>]
radio
wireless macacl modify
Modify an ACL entry
Syntax : modify [ssid_id = <number{0-9999}>] [radio_id = <number{0-9999}>]
hwaddr = <hardware-address> [permission = <{allow|deny}>]
[name = <quoted string>]

Parameters :
[ssid_id = <number{0-9999}>]
ssid id
[radio_id = <number{0-9999}>]
radio
hwaddr = <hardware-address>
The Ethernet MAC address of the ACL entry
[permission = <{allow|deny}>]
The action to be performed on ACL entry
[name = <quoted string>]
The name of the station
wireless macacl register
Start a registration process (only for register mode)
Syntax : register [ssid_id = <number{0-9999}>] [radio_id = <number{0-9999}>]
proceed = <{disabled|enabled}>

Parameters :
[ssid_id = <number{0-9999}>]
ssid id
[radio_id = <number{0-9999}>]
radio
proceed = <{disabled|enabled}>
Confirmation required
wireless mssid
Following commands are available :

iflist : Multiple ssid configuration

ifadd : Add an extra ssid context
ifdelete : Delete a ssid context
ifconfig : Configure a ssid context
ifattach : Attach a ssid context
ifdetach : Detach a ssid context
wireless mssid ifadd
Add an extra ssid context
Syntax : ifadd [ssid = <quoted string>] [radio_id = <number{0-9999}>]

Parameters :
[ssid = <quoted string>]
ssid
[radio_id = <number{0-9999}>]
radio
wireless mssid ifattach
Attach a ssid context
Syntax : ifattach ssid_id = <number{0-9999}> [radio_id = <number{0-9999}>]

Parameters :
ssid_id = <number{0-9999}>
ssid
[radio_id = <number{0-9999}>]
radio
wireless mssid ifconfig
Configure a ssid context
Syntax : ifconfig ssid_id = <number{0-9999}> [ssid = <quoted string>]
[apisolation = <{disabled|enabled}>]
[any = <{disabled|enabled}>]
[secmode = <{disable|wep|wpa-psk}>]
[WEPkey = <quoted string>] [WPAPSKkey = <quoted string>]
[WPAPSKversion = <{WPA|WPA2|WPA+WPA2}>]
[radio_id = <number{0-9999}>]

Parameters :
ssid_id = <number{0-9999}>
ssid id
[ssid = <quoted string>]
ssid
[apisolation = <{disabled|enabled}>]
ap isolation
[any = <{disabled|enabled}>]
public network
[secmode = <{disable|wep|wpa-psk}>]
security mode
[WEPkey = <quoted string>]
WEP key: expected format 5 or 13 ASCII characters, or 10 or 26 HEX
digits.
[WPAPSKkey = <quoted string>]
WPA-PSK key: expected format 8 to 63 ASCII characters or 64 HEX digits.
[WPAPSKversion = <{WPA|WPA2|WPA+WPA2}>]
wpa version
[radio_id = <number{0-9999}>]
radio
[addscript = <{(HIDDEN)}>]
(HIDDEN)
[delscript = <{(HIDDEN)}>]
(HIDDEN)
[trace = <{(HIDDEN)}>]
(HIDDEN)
wireless mssid ifdelete
Delete a ssid context
Syntax : ifdelete ssid_id = <number{0-9999}> [radio_id = <number{0-9999}>]

Parameters :
ssid_id = <number{0-9999}>
ssid
[radio_id = <number{0-9999}>]
radio
wireless mssid ifdetach
Detach a ssid context
Syntax : ifdetach ssid_id = <number{0-9999}> [radio_id = <number{0-9999}>]

Parameters :
ssid_id = <number{0-9999}>
ssid
[radio_id = <number{0-9999}>]
radio
wireless mssid iflist
Multiple ssid configuration
Syntax : iflist [ssid_id = <number{0-9999}>] [radio_id = <number{0-9999}>]

Parameters :
[ssid_id = <number{0-9999}>]
ssid
[radio_id = <number{0-9999}>]
radio
[HIDDEN]wireless multiuni
Following commands are available :

scanresults : display detected multicast mac addresses

add : add a multicast to unicast mapping
delete : delete all multicast mappings
list : show configured multicast to unicast mappings
flush : flush all multicast to unicast mappings
wireless multiuni add
add a multicast to unicast mapping
Syntax : add multicast = <hardware-address> unicast = <hardware-address>

Parameters :
multicast = <hardware-address>
Multicast MAC
unicast = <hardware-address>
Unicast MAC
wireless multiuni delete
delete all multicast mappings
Syntax : delete multicast = <hardware-address>

Parameters :
multicast = <hardware-address>
Multicast MAC
wireless multiuni flush
flush all multicast to unicast mappings
Syntax : flush
wireless multiuni list
show configured multicast to unicast mappings
Syntax : list
wireless multiuni scanresults
display detected multicast mac addresses
Syntax : scanresults [rescan = <{no|yes}>]

Parameters :
[rescan = <{no|yes}>]
rescan for new multicast addresses
wireless qos
Following commands are available :

config : configure QoS settings

apacconfig : configure AP EDCA parameters
staacconfig : configure STA EDCA parameters
wireless qos apacconfig
configure AP EDCA parameters
Syntax : apacconfig [class = <{AC_BE|AC_BK|AC_VI|AC_VO}>]
[cwmax = <{0|1|3|7|15|31|63|127|255|511|1023|2047|4095|
8191|16383|32767}>]
[cwmin = <{0|1|3|7|15|31|63|127|255}>]
[aifsn = <number{1-15}>] [txop = <number>]
[radio_id = <number{0-9999}>]

Parameters :
[class = <{AC_BE|AC_BK|AC_VI|AC_VO}>]
AC class
[cwmax = <{0|1|3|7|15|31|63|127|255|511|1023|2047|4095|8191|16383|32767}>]
CWmax configuration
[cwmin = <{0|1|3|7|15|31|63|127|255}>]
CWmin configuration
[aifsn = <number{1-15}>]
Aifsn configuration
[txop = <number>]
txoplimit [us] configuration
[radio_id = <number{0-9999}>]
radio
[acm = <{(HIDDEN)}>]
(HIDDEN)
[ecwmax = <{(HIDDEN)}>]
(HIDDEN)
[ecwmin = <{(HIDDEN)}>]
(HIDDEN)
wireless qos config
configure QoS settings
Syntax : config [mode = <{disabled|wmm}>] [radio_id = <number{0-9999}>]

Parameters :
[mode = <{disabled|wmm}>]
WMM active
[radio_id = <number{0-9999}>]
radio
[ackpolicy = <{(HIDDEN)}>]
(HIDDEN)
[apsd = <{(HIDDEN)}>]
(HIDDEN)
wireless qos staacconfig
configure STA EDCA parameters
Syntax : staacconfig [class = <{AC_BE|AC_BK|AC_VI|AC_VO}>]
[cwmax = <{0|1|3|7|15|31|63|127|255|511|1023|2047|4095|
8191|16383|32767}>]
[cwmin = <{0|1|3|7|15|31|63|127|255}>]
[aifsn = <number{1-15}>] [txop = <number>]
[radio_id = <number{0-9999}>]

Parameters :
[class = <{AC_BE|AC_BK|AC_VI|AC_VO}>]
AC class
[cwmax = <{0|1|3|7|15|31|63|127|255|511|1023|2047|4095|8191|16383|32767}>]
CWmax configuration
[cwmin = <{0|1|3|7|15|31|63|127|255}>]
CWmin configuration
[aifsn = <number{1-15}>]
Aifsn configuration
[txop = <number>]
txoplimit [us] configuration
[radio_id = <number{0-9999}>]
radio
[acm = <{(HIDDEN)}>]
(HIDDEN)
[ecwmax = <{(HIDDEN)}>]
(HIDDEN)
[ecwmin = <{(HIDDEN)}>]
(HIDDEN)
[HIDDEN]wireless qual
Following commands are available :

up : wl up
down : wl down
out : wl out
renewssid : renew ssid
txant : wl txant
antdiv : wl antdiv
fqacursy : wl fqacursy
txrate : wl txrate
txpower : wl txpower
caldata : Calibration data storage commands
counters : Couters
wireless qual antdiv
wl antdiv
Syntax : antdiv [value = <{0|1|auto}>] [radio_id = <number{0-9999}>]

Parameters :
[value = <{0|1|auto}>]
Value
[radio_id = <number{0-9999}>]
radio
wireless qual caldata
Calibration data storage commands
Syntax : caldata cmd = <{init|set|get|reset|store|lock|dump}>
[param = <quoted string>] [radio_id = <number{0-9999}>]

Parameters :
cmd = <{init|set|get|reset|store|lock|dump}>
Calibration data storage command
[param = <quoted string>]
Parameters for set command (0xabcd=0x12)
[radio_id = <number{0-9999}>]
radio
wireless qual counters
Couters
Syntax : counters [radio_id = <number{0-9999}>]

Parameters :
[radio_id = <number{0-9999}>]
radio
wireless qual down
wl down
Syntax : down [radio_id = <number{0-9999}>]

Parameters :
[radio_id = <number{0-9999}>]
radio
wireless qual fqacursy
wl fqacursy
Syntax : fqacursy channum = <number{0-13}> [radio_id = <number{0-9999}>]

Parameters :
channum = <number{0-13}>
channum
[radio_id = <number{0-9999}>]
radio
wireless qual out
wl out
Syntax : out [radio_id = <number{0-9999}>]

Parameters :
[radio_id = <number{0-9999}>]
radio
wireless qual renewssid
renew ssid
Syntax : renewssid [radio_id = <number{0-9999}>]

Parameters :
[radio_id = <number{0-9999}>]
radio
wireless qual txant
wl txant
Syntax : txant [value = <{0|1|auto}>] [radio_id = <number{0-9999}>]

Parameters :
[value = <{0|1|auto}>]
Value
[radio_id = <number{0-9999}>]
radio
wireless qual txpower
wl txpower
Syntax : txpower [radio_id = <number{0-9999}>] [value = <string>]

Parameters :
[radio_id = <number{0-9999}>]
radio
[value = <string>]
value
wireless qual txrate
wl txrate
Syntax : txrate [radio_id = <number{0-9999}>]
[modulation = <{auto|CCK|OFDMLegacy|OFDMMCS}>]
[index = <number{0-32}>]

Parameters :
[radio_id = <number{0-9999}>]
radio
[modulation = <{auto|CCK|OFDMLegacy|OFDMMCS}>]
modulation
[index = <number{0-32}>]
index
wireless qual up
wl up
Syntax : up [radio_id = <number{0-9999}>]

Parameters :
[radio_id = <number{0-9999}>]
radio
wireless radio
Configures radio settings.
Syntax : radio [state = <{enabled|disabled}>]
[channel = <{auto|1|2|3|4|5|6|7|8|9|10|11|12|13}>]
[interop = <{802.11b/g|802.11b/g/n}>]
[frameburst = <{disabled|enabled}>]
[channelwidth = <{20|20/40}>] [sgi = <{disabled|enabled}>]
[cdd = <{disabled|enabled}>] [stbc = <{disabled|enabled}>]
[frameaggregation = <{off|ampdu|amsdu}>]
[radio_id = <number{0-9999}>]

Parameters :
[state = <{enabled|disabled}>]
Interface operational status of wireless access point
[channel = <{auto|1|2|3|4|5|6|7|8|9|10|11|12|13}>]
Communication channel number
[interop = <{802.11b/g|802.11b/g/n}>]
Interoperability mode
[frameburst = <{disabled|enabled}>]
Framebursting
[channelwidth = <{20|20/40}>]
channelwidth
[sgi = <{disabled|enabled}>]
Short Guard Time Interval
[cdd = <{disabled|enabled}>]
Cyclic Delay Diversity
[stbc = <{disabled|enabled}>]
Space Time Block Coding
[frameaggregation = <{off|ampdu|amsdu}>]
Frame aggregation method
[radio_id = <number{0-9999}>]
radio
[rts = <{(HIDDEN)}>]
(HIDDEN)
[protection = <{(HIDDEN)}>]
(HIDDEN)
[protmode = <{(HIDDEN)}>]
(HIDDEN)
[prottrigger = <{(HIDDEN)}>]
(HIDDEN)
[shortslot = <{(HIDDEN)}>]
(HIDDEN)
[locale = <{(HIDDEN)}>]
(HIDDEN)
[country = <{(HIDDEN)}>]
(HIDDEN)
[rateset = <{(HIDDEN)}>]
(HIDDEN)
[dtim = <{(HIDDEN)}>]
(HIDDEN)
[flags = <{(HIDDEN)}>]
(HIDDEN)
[srl = <{(HIDDEN)}>]
(HIDDEN)
[lrl = <{(HIDDEN)}>]
(HIDDEN)
[scb = <{(HIDDEN)}>]
(HIDDEN)
[tea = <{(HIDDEN)}>]
(HIDDEN)
[interferencemode = <{(HIDDEN)}>]
(HIDDEN)
[interferencechannel = <{(HIDDEN)}>]
(HIDDEN)
[htsecurityrestriction = <{(HIDDEN)}>]
(HIDDEN)
wireless reset
Reset Wireless interface settings to defaults
Syntax : reset proceed = <{disabled|enabled}>

Parameters :
proceed = <{disabled|enabled}>
Confirmation required
[HIDDEN]wireless secmode
Following commands are available :

config : Configure/Show the security mode.

wep : Configure WEP settings.
wpa-psk : Configure WPA-PSK settings.
wireless secmode config
Configure/Show the security mode.
Syntax : config [mode = <{disable|wep|wpa-psk}>]

Parameters :
[mode = <{disable|wep|wpa-psk}>]
security mode
wireless secmode wep
Configure WEP settings.
Syntax : wep [encryptionkey = <quoted string>]

Parameters :
[encryptionkey = <quoted string>]
WEP key: expected format 5 or 13 ASCII characters, or 10 or 26 HEX
digits.
wireless secmode wpa-psk
Configure WPA-PSK settings.
Syntax : wpa-psk [presharedkey = <quoted string>]
[version = <{WPA|WPA2|WPA+WPA2}>]

Parameters :
[presharedkey = <quoted string>]
WPA-PSK key: expected format 8 to 63 ASCII characters or 64 HEX digits.
[version = <{WPA|WPA2|WPA+WPA2}>]
wpa version
[encryption = <{(HIDDEN)}>]
(HIDDEN)
[rekeysec = <{(HIDDEN)}>]
(HIDDEN)
wireless stations
Following commands are available :

list : List of the currently associated stations

wireless stations list
List of the currently associated stations
Syntax : list [ssid_id = <number{0-9999}>] [radio_id = <number{0-9999}>]

Parameters :
[ssid_id = <number{0-9999}>]
Selected BSS
[radio_id = <number{0-9999}>]
radio
wireless wps
Following commands are available :

config : Configure/Show the WPS settings

pin : Enroll a WSC Station by entering its device password or PIN
[HIDDEN]wireless wps ap_pin
Set/Show the AP pin value
Syntax : ap_pin [ssid_id = <number{0-9999}>] [radio_id = <number{0-9999}>]
value = <quoted string>

Parameters :
[ssid_id = <number{0-9999}>]
ssid id
[radio_id = <number{0-9999}>]
radio
value = <quoted string>
Enrollee Station PIN
wireless wps config
Configure/Show the WPS settings
Syntax : config [ssid_id = <number{0-9999}>] [radio_id = <number{0-9999}>]
[state = <{disabled|enabled}>]
[apsetuplocked = <{disabled|enabled}>]
[wscstate = <{notconfigured|configured}>]
[ap_pin = <quoted string>]

Parameters :
[ssid_id = <number{0-9999}>]
ssid id
[radio_id = <number{0-9999}>]
radio
[state = <{disabled|enabled}>]
WPS state
[apsetuplocked = <{disabled|enabled}>]
AP Setup Lock
[wscstate = <{notconfigured|configured}>]
WSC State
[ap_pin = <quoted string>]
Modify the PIN that is used to configure the AP with an External
Registrar
[HIDDEN]wireless wps mode
Set/Show the configuration mode value
Syntax : mode [ssid_id = <number{0-9999}>] [radio_id = <number{0-9999}>]
[state = <{unconfigured|configured}>]

Parameters :
[ssid_id = <number{0-9999}>]
ssid id
[radio_id = <number{0-9999}>]
radio
[state = <{unconfigured|configured}>]
configuration mode
[value = <{(HIDDEN)}>]
(HIDDEN)
wireless wps pin
Enroll a WSC Station by entering its device password or PIN
Syntax : pin [ssid_id = <number{0-9999}>] [radio_id = <number{0-9999}>]
value = <quoted string>

Parameters :
[ssid_id = <number{0-9999}>]
ssid id
[radio_id = <number{0-9999}>]
radio
value = <quoted string>
Enrollee Station PIN
[HIDDEN]wizard
Following commands are available :

config : configuration of embedded wizard

def : Profile definition.
flush : Clear active profile
view : View active profile
wizard config
configuration of embedded wizard
Syntax : config [allow_factory_tpl = <{no|yes}>] [trace = <{no|yes}>]
[autopopup = <{no|yes}>] [configtime = <number{15-300}>]

Parameters :
[allow_factory_tpl = <{no|yes}>]
Option to indicate if factory templates may be loaded
[trace = <{no|yes}>]
Trace during loading
[autopopup = <{no|yes}>]
Generate wizard popup if factory defaults are active
[configtime = <number{15-300}>]
Time in between 'please wait' page and 'complete' page(in seconds)
wizard def
Profile definition.
Syntax : def var = <string>
type = <{string|passw|integer|combo|list|radioset|bool|ipaddr|
ipmask|passwcheck|label|hex|grp}>
[grp = <string>] [desc = <translated string>]
[help = <translated string>] [alias = <translated string>]
[req <{no|yes}>] [default = <quoted string>]
[data = <quoted string>] [dalias = <translated string>]
[min = <number>] [max = <number>] [calc = <quoted string>]
[linkvar = <string>]

Parameters :
[profile = <profile filename>]
Profile name to load
wizard view
View active profile
Syntax : view
xdsl
Following commands are available :

info : Displays status information about modem

config : Modify/Display dsl configuration
version : Display xdsl version information.

Following command groups are available :

debug
xdsl config
Modify/Display dsl configuration
Syntax : config [adslmultimode = <{disable|adsl|adsl2|adsl2plus}>]
[vdslmultimode = <{disable|vdsl2}>]
[detect-lop = <{disabled|enabled}>]
[syslog = <{disabled|enabled}>] [status = <{down|up}>]

Parameters :
[adslmultimode = <{disable|adsl|adsl2|adsl2plus}>]
Set/Show selected multimode type of the modem
[vdslmultimode = <{disable|vdsl2}>]
Set/Show selected multimode type of the modem
[detect-lop = <{disabled|enabled}>]
Detect Loss Of Power
[syslog = <{disabled|enabled}>]
Log in syslog during showtime
[status = <{down|up}>]
configure adsl line up or down (setting can't be saved!)
xdsl debug
Following commands are available :

bitloadinginfo : Displays # bits per tone

deltconfig : Dual Ended Line Testing interface
deltinfo : Dual Ended Line Test result display
modemoptioninfo : The modem options bitmap display
multimode : Config custom multimode
traceconfig : Config the adsl tracelevel
xdsl debug bitloadinginfo
Displays # bits per tone
Syntax : bitloadinginfo
xdsl debug deltconfig
Dual Ended Line Testing interface
Syntax : deltconfig [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable dual ended line testing
xdsl debug deltinfo
Dual Ended Line Test result display
Syntax : deltinfo
xdsl debug modemoptioninfo
The modem options bitmap display
Syntax : modemoptioninfo
xdsl debug multimode
Config custom multimode
Syntax : multimode [config = <[+/-]flag[+/-flag...]{default t1.413issue2
g992.1_annex_a g992.2 g992.3_annex_a
g992.3_annex_l g992.3_annex_m g992.5_annex_a
g992.5_annex_m}>]

Parameters :
[config = <[+/-]flag[+/-flag...]{default t1.413issue2 g992.1_annex_a g992.2
g992.3_annex_a g992.3_annex_l g992.3_annex_m g992.5_annex_a
g992.5_annex_m}>]
The custom multimode bitmap
xdsl debug traceconfig
Config the adsl tracelevel
Syntax : traceconfig level = <{0|1|2|3|4}>

Parameters :
level = <{0|1|2|3|4}>
Trace Level (0=disable tracing; 1=enable dsl manager tracing; 2=enable
dsl driver tracing)
xdsl info
Displays status information about modem
Syntax : info [expand = <{disabled|enabled}>]
[g.997.1 = <{disabled|enabled}>]
[counter_period_filter = <{current|15_minutes|24_hours}>]
[counters_reset = <{no|yes}>]

Parameters :
[expand = <{disabled|enabled}>]
Condensed / Expanded listing link information
[g.997.1 = <{disabled|enabled}>]
Condensed / Expanded listing link information
[counter_period_filter = <{current|15_minutes|24_hours}>]
Specify the statistics period
[counters_reset = <{no|yes}>]
Reset all counters
[HIDDEN]xdsl maxspeed
Set ATM Default Maximum Speed.
Syntax : maxspeed [tx = <number>] [rx = <number>]

Parameters :
[tx = <number>]
A predefined Maximum ADSL Speed in Upstream direction
[rx = <number>]
A predefined Maximum ADSL Speed in Downstream direction
[HIDDEN]xdsl qual
Following commands are available :

alb : Analog front end LoopBack Test Mode

bitloadinginfo : Displays # bits per tone
lov : Longitudinal Balance (LOV) Test Mode -continuously sending-
lcl : Longitudinal Balance (LCL) Test Mode -online quiet-
qln : Quiet Line Noise Test Mode
aisf : Set modem's ATU Impedance State Force
hybrid : Hybrid Test Mode
freeze-showtime : freeze showtime (no auto retrain)
freeze-medley : freeze medley
freeze-reverb : freeze reverb
quiet : Send quiet
xdsl qual aisf
Set modem's ATU Impedance State Force
Syntax : aisf state = <{disable|inactive|active}>

Parameters :
state = <{disable|inactive|active}>
aisf state
xdsl qual alb
Analog front end LoopBack Test Mode
Syntax : alb type = <{adsl|vdsl}> address = <string>
port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain|
doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|
ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|
kerberos|ldap|login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|
pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet|
rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|
sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|
ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami|
xwindows} or number>

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable freeze medley testing
xdsl qual freeze-reverb
freeze reverb
Syntax : freeze-reverb [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable freeze reverb testing
xdsl qual freeze-showtime
freeze showtime (no auto retrain)
Syntax : freeze-showtime [state = <{disabled|enabled}>]

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable freeze showtime testing
xdsl qual hybrid
Hybrid Test Mode
Syntax : hybrid type = <{adsl|vdsl}> address = <string>
port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|
domain|doom|echo|exec|finger|ftp|ftp-data|gopher|h323|
httpproxy|ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|
irc-o|irc-u|kerberos|ldap|login|netbios-dgm|netbios-ns|
netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|
nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|snmptrap|snpp|
sntp|sql*net|sql-net|sqlserv|sunrpc|syslog|systat|talk|
telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-rlogin|
who|www-http|whoami|xwindows} or number>

Parameters :
type = <{adsl|vdsl}>
Type of Test Mode
address = <string>
remote IP Address or string "modem" to store on the board
port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec|
finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|ingres-
net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-dgm|
netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet|
rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|
syslog|systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>
Remote IP Port
xdsl qual lcl
Longitudinal Balance (LCL) Test Mode -online quiet-
Syntax : lcl
xdsl qual lov
Longitudinal Balance (LOV) Test Mode -continuously sending-
Syntax : lov type = <{adsl_annex_a|adsl_annex_l_wide|adsl_annex_l_narrow|
vdsl2_998_m1x_a|vdsl2_998_m1x_b|vdsl2_998_m1_nus0|
vdsl2_998_m2x_a|vdsl2_998_m2x_m|vdsl2_998_m2x_b|
vdsl2_998_m2x_nus0|vdsl2_998e17_m2x_nus0|
vdsl2_998e17_m2x_nus0_m|vdsl2_998ade17_m2x_nus0_m|
vdsl2_998ade17_m2x_a|vdsl2_998ade17_m2x_b|
vdsl2_998e30_m2x_nus0|vdsl2_998e30_m2x_m|
vdsl2_998ade30_m2x_nus0_m|vdsl2_998ade30_m2x_nus0_a|
vdsl2_997_m1c7_a|vdsl2_997_m1c8_m|vdsl2_997_m1x_m|
vdsl2_997_m2x8_m|vdsl2_997_m2x_a|vdsl2_997_m2x_m|
vdsl2_hpe17_m1_nus0|vdsl2_hpe30_m1_nus0|vdsl2_997e17_m2x_a|
vdsl2_997e17_m2x_nus0}>

Parameters :
type = <{adsl_annex_a|adsl_annex_l_wide|adsl_annex_l_narrow|vdsl2_998_m1x_a|
vdsl2_998_m1x_b|vdsl2_998_m1_nus0|vdsl2_998_m2x_a|vdsl2_998_m2x_m|
vdsl2_998_m2x_b|vdsl2_998_m2x_nus0|vdsl2_998e17_m2x_nus0|
vdsl2_998e17_m2x_nus0_m|vdsl2_998ade17_m2x_nus0_m|
vdsl2_998ade17_m2x_a|vdsl2_998ade17_m2x_b|vdsl2_998e30_m2x_nus0|
vdsl2_998e30_m2x_m|vdsl2_998ade30_m2x_nus0_m|
vdsl2_998ade30_m2x_nus0_a|vdsl2_997_m1c7_a|vdsl2_997_m1c8_m|
vdsl2_997_m1x_m|vdsl2_997_m2x8_m|vdsl2_997_m2x_a|vdsl2_997_m2x_m|
vdsl2_hpe17_m1_nus0|vdsl2_hpe30_m1_nus0|vdsl2_997e17_m2x_a|
vdsl2_997e17_m2x_nus0}>
Type of (LOV) Test Mode
[signal_type = <{(HIDDEN)}>]
(HIDDEN)
[HIDDEN]xdsl qual mib
Retreive extra adsl info Test Mode
Syntax : mib type = <{adsl|vdsl}> address = <string>
port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain|
doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|
ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|
kerberos|ldap|login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|
pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet|
rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|
sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|
ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami|
xwindows} or number>

Parameters :
type = <{adsl|vdsl}>
Type of Test Mode
address = <string>
remote IP Address or string "modem" to store on the board
port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|bootpc|
bootps|chargen|clearcase|daytime|discard|dns|domain|doom|echo|exec|
finger|ftp|ftp-data|gopher|h323|httpproxy|ike|ils|imap2|imap3|ingres-
net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|login|netbios-dgm|
netbios-ns|netbios-ssn|netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet|
rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|sunrpc|
syslog|systat|talk|telnet|time|timed|tftp|ulistserv|utime|uucp|uucp-
rlogin|who|www-http|whoami|xwindows} or number>
Remote IP Port
xdsl qual qln
Quiet Line Noise Test Mode
Syntax : qln type = <{adsl|vdsl}> address = <string>
port = <{undefined|at-echo|at-nbp|at-rtmp|at-zis|auth|bgp|biff|
bootpc|bootps|chargen|clearcase|daytime|discard|dns|domain|
doom|echo|exec|finger|ftp|ftp-data|gopher|h323|httpproxy|
ike|ils|imap2|imap3|ingres-net|ipcserver|ipx|irc-o|irc-u|
kerberos|ldap|login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|ntalk|ntp|
pcmail-srv|pop2|pop3|printer|qotd|realaudio|rip|rtelnet|
rtsp|sip|smtp|snmp|snmptrap|snpp|sntp|sql*net|sql-net|
sqlserv|sunrpc|syslog|systat|talk|telnet|time|timed|tftp|
ulistserv|utime|uucp|uucp-rlogin|who|www-http|whoami|
xwindows} or number>

Parameters :
[state = <{disabled|enabled}>]
Enable/Disable freeze reverb testing
xdsl version
Display xdsl version information.
Syntax : version

r6672 Commads
100% (2)
r6672 Commads
100 pages
Alcatel Omniswitch Commands
No ratings yet
Alcatel Omniswitch Commands
14 pages
Full Final Lab Mannual Cyber PDF
No ratings yet
Full Final Lab Mannual Cyber PDF
105 pages
Mas Data Telnet
No ratings yet
Mas Data Telnet
6 pages
Comando S
No ratings yet
Comando S
3 pages
ALU 7450 Command Reference
100% (1)
ALU 7450 Command Reference
8 pages
ISP 1era Parte
No ratings yet
ISP 1era Parte
24 pages
Olt Huawei
No ratings yet
Olt Huawei
26 pages
Msan Command
No ratings yet
Msan Command
10 pages
HP 1920 Comandos
No ratings yet
HP 1920 Comandos
3 pages
Commande Display
No ratings yet
Commande Display
24 pages
router เมกะบางนาl
No ratings yet
router เมกะบางนาl
9 pages
Config vg202
No ratings yet
Config vg202
4 pages
Huawei Router Commands
No ratings yet
Huawei Router Commands
3 pages
Comandos Telnet 8888
No ratings yet
Comandos Telnet 8888
6 pages
Networking and Linux
No ratings yet
Networking and Linux
5 pages
Commands Duw3001
No ratings yet
Commands Duw3001
5 pages
CN Experimemt 2
No ratings yet
CN Experimemt 2
7 pages
Comandos Ne40 Huawei
100% (1)
Comandos Ne40 Huawei
5 pages
HYBRID Noletov
No ratings yet
HYBRID Noletov
202 pages
Documentation Lignes de Commandes
No ratings yet
Documentation Lignes de Commandes
34 pages
Mdu Troubleshooting
No ratings yet
Mdu Troubleshooting
14 pages
Networking Commanads 2
No ratings yet
Networking Commanads 2
36 pages
Comandos Del Router 6000
No ratings yet
Comandos Del Router 6000
3 pages
9300
No ratings yet
9300
5 pages
Resumen Cisco Vs Juniper Commands
No ratings yet
Resumen Cisco Vs Juniper Commands
5 pages
Telnet Commands
No ratings yet
Telnet Commands
9 pages
Linux Networking Basic Commands
No ratings yet
Linux Networking Basic Commands
8 pages
Configuration
No ratings yet
Configuration
28 pages
Network Commands
No ratings yet
Network Commands
21 pages
CLI NCLI Commands
100% (2)
CLI NCLI Commands
8 pages
8 10 2023 Basic Linux CMD
No ratings yet
8 10 2023 Basic Linux CMD
9 pages
IJOS Lab Guide - Lab1.Ready
No ratings yet
IJOS Lab Guide - Lab1.Ready
17 pages
Linux Command Cheat Sheet
No ratings yet
Linux Command Cheat Sheet
9 pages
Net
No ratings yet
Net
27 pages
Linux For Devops
No ratings yet
Linux For Devops
6 pages
Linux NetWorking Commands-1
No ratings yet
Linux NetWorking Commands-1
16 pages
Networking Commands
No ratings yet
Networking Commands
7 pages
Conf 2
No ratings yet
Conf 2
8 pages
CLI Temperatura y Cold Restart Ericsson TN
67% (9)
CLI Temperatura y Cold Restart Ericsson TN
11 pages
CN Lab2 Mussa
No ratings yet
CN Lab2 Mussa
13 pages
NetApp BasicAdmin
100% (6)
NetApp BasicAdmin
57 pages
Exp 2
No ratings yet
Exp 2
14 pages
COMANDO
No ratings yet
COMANDO
20 pages
8 Linux Commands
No ratings yet
8 Linux Commands
7 pages
Telnet
No ratings yet
Telnet
7 pages
Remover A Senha de ROOT
No ratings yet
Remover A Senha de ROOT
3 pages
Computerworkshop
No ratings yet
Computerworkshop
5 pages
BCSL 63
No ratings yet
BCSL 63
8 pages
Practical - 1: AIM: Study of Basic Linux Network Commands
No ratings yet
Practical - 1: AIM: Study of Basic Linux Network Commands
15 pages
CN Network Commands
No ratings yet
CN Network Commands
5 pages
Alcatel 4400 Quick Reference Commands
No ratings yet
Alcatel 4400 Quick Reference Commands
56 pages
M02 BasicAdmin V2.0
No ratings yet
M02 BasicAdmin V2.0
58 pages
Networkcommands Assignment
No ratings yet
Networkcommands Assignment
6 pages
Lab 1
No ratings yet
Lab 1
16 pages
25 Network Setup
No ratings yet
25 Network Setup
8 pages
CMD Commands, Also Used For Hacking Into Victims System: Quote
No ratings yet
CMD Commands, Also Used For Hacking Into Victims System: Quote
10 pages
CMD Commands Hacking
80% (10)
CMD Commands Hacking
10 pages
021825lbl
No ratings yet
021825lbl
7 pages
OLMESARTAN20VS20TELMISARTAN
No ratings yet
OLMESARTAN20VS20TELMISARTAN
8 pages
Amiloride HCTZ Combination
No ratings yet
Amiloride HCTZ Combination
5 pages
Antoconvulsants
No ratings yet
Antoconvulsants
60 pages
Antoconvulsants 2025!05!16
No ratings yet
Antoconvulsants 2025!05!16
14 pages
Anti Epileptic
No ratings yet
Anti Epileptic
2 pages
Telnet Hidden
No ratings yet
Telnet Hidden
16 pages
Technicolor TG 588 V: Ultra-Broadband Gateway
No ratings yet
Technicolor TG 588 V: Ultra-Broadband Gateway
3 pages
Efficient CLI
No ratings yet
Efficient CLI
379 pages
smartRG 505 Manual
No ratings yet
smartRG 505 Manual
65 pages