Product page >

Controlled Availability Data Sheet

SecFlow-1v
Ruggedized Multiservice Gateway

• Enhanced security capabilities: stateful firewall, VPNs, When equipped with LoRaWAN radio, SecFlow-1v aggregates
automated PKI and optional SCADA-aware Firewall multiple low-power low-bandwidth sensors/meters deployed
over a wide area. This provides an ideal solution for rural and
• Resilient HSPA+/LTE cellular network uplink for other non-dense areas saving CAPEX and OPEX.
maximum service continuity and built-in GNSS for
The gateway is designed for installation under harsh
location reporting environmental conditions. It features DIN-rail mount, IP30
• Reduced OPEX with secure Zero Touch provisioning protection level, wide operating temperature range (-40°C to
75°C) without fans, and EMI immunity (IEC 61850-3, IEEE 1613
• Hosting of third-party software for customized and EN 50121-4).
applications (Edge computing) SecFlow-1v supports several powering options that all use an
• SCADA Protocol Gateway for IEC-101, IEC-104, Modbus- embedded isolated DC power supply, to meet the harsh
RTU/TCP, and DNP3 protocols environmental requirements.

• Option for second cellular modem, Wi-Fi or LoRaWAN MARKET SEGMENTS AND APPLICATIONS
(Future*)
SecFlow-1v addresses the Industrial IoT, for example:
• Embedded isolated DC power supply • Distributed automation in secondary substations
• Enhanced EMI and immunity according to IEC 61850-3, • Smart meter concentration
IEEE 1613, EN 50121-4 (Future*) • Water Resources Management
• Smart Retail
SecFlow ®­1v is an industrial IoT gateway, a member of RAD’s • Out-of-band management using cellular uplink
SecFlow suite of ruggedized Ethernet products.
SecFlow-1v is an open platform hosting third-party software,
INTEROPERABILITY
besides its communication capabilities. SecFlow-1v operates with SecurityGateway, SecFlow-1, and
SecFlow-1v features four GbE Copper ports and one GbE SFP SecFlow-2.
port, two serial RS-232 ports or one RS-232 and one RS-485/2W
port, PoE, and a cellular modem with two SIM cards for ROUTER AND VPN SERVICES
maximum link resiliency.
SecFlow-1v features static routing, OSPF, BGP, VRF and
SecFlow-1v supports third-party applications using Linux NAT/NAT-Traversal.
containers for quick introduction of new capabilities for
The device features a VPN gateway with two operation modes:
Industrial IoT solutions.
• Inter-site connectivity using IPsec tunnels
SecFlow-1v is equipped with serial interfaces for connectivity of
legacy RTUs with new IP-based IEDs. SecFlow-1v gateway • Remote user access, using SSH
converts legacy IEC-101 protocol to IP-based IEC-104, enabling Inter-site VPN based on IPsec encrypted link ensures L3
seamless communication from the IP SCADA to both the old and transparent connection of the Ethernet networks sites.
new RTUs. This provides a single box solution for multi-service For remote access, the router uses an SSH-encrypted tunnel,
applications and smooth migration to all-IP networks. with user authentication and specific access authorization.
In addition to its cellular uplink that provides wireless connection
towards the network, SecFlow-1v can be equipped with
additional wireless technologies. When equipped with Wi-Fi,
SecFlow-1v acts as an access point, aggregating several users,
like on site technicians or sensors, saving the need for wired
connection or multiple costly cellular connections from each
device.
 Data Sheet
SecFlow-1v
Ruggedized Multiservice Gateway

LAYER 2 SWITCH FUCNTIONALITY (FUTURE*) SCADA-Aware Firewall

• Local switching w/ and w/o VLAN support SecFlow-1v supports SCADA-aware firewall, providing
• Supports 2K MAC addresses and 16 broadcast domains (VLAN network-based distributed security, especially designed for
IDs) critical infrastructure SCADA applications (IEC-104, DNP3-TCP,
• Per port ingress rate limiting and Modbus-TCP). The device monitors SCADA commands,
• Per port storm control policer using deep packet inspection, to validate whether they fit the
intended application purpose.
QoS:
• 4 priority Qs ARCHITECTURE
• Classification based on:
Ordering options with Programmable Logic Controller (PLC)
• Port
present an all-in-one-box solution from a single source for
• 802.1p
Distribution Automation, Building Automation, etc., supporting
• IPv4 DCSP
Modbus, DNP3, IEC-104 and BACnet masters. The devices can be
• Scheduling programmed using:
• Strict priority • Ladder logic in accordance with EC 61131-3
• Mix of strict and Weighted Round Robin (WRR)
• Instruction List (IL)
• Functional Block Diagram (FBD)
MANAGEMENT AND SECURITY
• Sequential Function Chart (SFC)
The device can be managed via the SecFlow web-based interface • Structured Text (ST)
(HTTP/HTTPS).
PLC offers comprehensive cyber security relaying on stateful
For easy and safe deployment, RAD offers Zero Touch firewall or SCADA firewall, VPNs like IPsec and OpenVPN,
provisioning thus reducing OPEX and providing a simple way to automated PKI, as well as RADview RAD management with SIEM.
securely deploy thousands of elements in the network. Zero Touch provisioning allows secure service activation and
SecFlow-1v also supports a variety of access protocols, including maintenance, with low OPEX.
CLI and TFTP/SFTP.

3G/LTE
Wireless Network
Priv ate VPN
Remote Sites Operation Ce nte r

IP Services
Serial VPN

SecFlow-1v
RTU NMS

ETH FO
PSN

RTU HUB Device Server

PoE

Camera

Figure 1. Industrial IoT Backhaul

2
 Data Sheet
SecFlow-1v
Ruggedized Multiservice Gateway

Specifications Verizon Wireless certification (Future*)

PTCRB certification (Future*)
ETHERNET INTERFACES
SIM card
Fast Ethernet Port Mini SIM, 25 mm x 15 mm (0.98 in x 0.59 in)
4 x 10/100/1000BASE-T, RJ-45 connector Form Factor: 2FF
Autonegotiation IEEE 802.3ab
Wi-Fi module (Future*)
GbE Port IEEE 802.11ac/a/b/g/n
1 x 100/1000FX, SFP socket Dual band 2.4GHz and 5GHz
4 GbE Copper with up to 2 x 30W or 4 x 15W PoE (optional), Up to 8 users
1 x 60W (Future*)
LoRaWAN modem (Future*)
Max Frame Size
433MHz/868MHz/915MHz bands
1.5 kB
SX1301 base band processor emulating 49 x LoRa demodulators,
10 parallel demodulation paths
SERIAL INTERFACES
8 uplinks channel and 1 downlink channel.
2 x RS-232 ports
2 x SX125x Tx/Rx front-ends high/low
1 x RS-232 + 1 x RS-485 ports (Future*)
Tx power up to 25 dBm, Rx sensitivity down to -139 dBm @ SF12,
Isolated/non-isolated BW 125 kHz.
UDP packet forwarder
CELLULAR MODEM
Dual SIM cellular modem for HSPA+/EVDO or LTE networks LoRaWAN server (optional)
(technology backward-compatible) As per specification v1.0.3
Configurable Cellular authentication using PAP or CHAP
FOTA (Firmware upgrade Over the Air)

Remote Site

IP/TCP

Central Site
RTU

IP/TCP
Master

ETH ETH
RTU PSN

Serial
SCADA
SecFlow-1v
RTU PLC

Serial

RTU

3
 Data Sheet
SecFlow-1v
Ruggedized Multiservice Gateway

GNSS Tools
GPS – American (default) TFTP/SFTP
Galileo – European Multiuser TACACS+

NETWORKING TIMING
L3 mGRE DMVPN Local time setting
L3 IPSec VPN SNTP
OpenVPN
SECURITY
SCADA gateway for IEC101/104, Modbus RTU/TCP and DNP3
Stateful Firewall
ROUTER
IPsec
Static routing, OSPFv2, BGP, VRF, IPv4, NAT, NAT-T
AES128 and AES256 GCM encryption

PLC PKI with X.509 certification

IKEv1
6 x Digital Inputs: 0V/5V, 20mA
6 x Digital Outputs: IKEv2
SHA2
Relay contacts: NO/NC
• 250VAC/8A max Interoperability with SCEP server 2012 and higher
• 30VDC/8A max
RESILIENCY
• 250VDC, 0.28A max
Conditioned/scheduled system reboot
6 x Analog Inputs: 0–5V, 20mA (max)
OSPFv2
Web GUI
Cellular ISP redundancy (SIM cards backup)
Northbound to HMI:
• Modbus Policy-based IPsec VPN redundancy between fiber and cellular
links
• DNP3
• IEC-104
DIAGNOSTICS
• BACnet
Interface counters per port
Up to 5 concurrent masters
(Modbus TCP, DNP3 TCP or BACnet TCP, IEC-104) Syslog
Up to 400 additional I/O points SNMPv3 GET and traps
I/O points split between 2 Modbus-RTU LEDs including Alarm indication
Up to 10 Modbus-TCP slaves Dry contacts 2-in and 2-out

MANAGEMENT GENERAL

Control Port Compliance

Interface: RS-232 Enhanced EMI and immunity according to IEC 61850-3,
IEEE 1613, EN 50121-4 (Future*)
Connector: RJ-45
Environment
Management Options
Storage Temperature: -40 to 85C (-40 to 185F)
CLI with password-protected access
Web-based interface using HTTP or HTTPS Enclosure 1: -20 to 60C (-4 to 140F)
Enclosure 2: -40 to 75C (-40 to 167F)
SMS commands
USB 2.0 host for software upload (Future*) Enclosure 3: -40 to 75C (-40 to 167F)

SD memory card (Future*) Humidity: up to 90%

4
 Data Sheet
SecFlow-1v
Ruggedized Multiservice Gateway

Note: The actual chassis and operating temperature depend on the

ordering options.
Ordering

Physical RECOMMENDED CONFIGURATIONS

Enclosure 1 (E1 in ordering options) SF-1V/E1/12V/4U1S/2RS/HSP
E1 chassis, 12 VDC (11–30VDC) power supply, 4 GbE copper
Height: 138 mm (5.43 in)
ports, 1 GbE SFP port, 2 RS-232 Interfaces, HSPA+ (high-speed
Width: 53.3 mm (2.1 in) packet access) modem, 3.5 Gb
Depth: 123.3 mm (4.85 in) SF-1V/E1/12V/4U1S/2RS/HSP/G
Weight: 0.88 kg (1.94 lb) E1 chassis, 12 VDC (11–30VDC) power supply, 4 GbE copper
ports, 1 GbE SFP port, 2 RS-232 Interfaces, HSPA+ (high-speed
Enclosure 2 (E2 in ordering options) packet access) modem, 3.5 Gb, integrated GPS
Height: 157.2 mm (6.19 in) SF-1V/E1/12V/4U1S/2RSM/HSP
Width: 82.8 mm (3.25 in) E1 chassis, 12 VDC (11–30VDC) power supply, 4 GbE copper
Depth: 150 mm (5.9 in) ports, 1 GbE SFP port, 1 RS-232 port, 1 RS-485 port, HSPA+ (high-
speed packet access) modem, 3.5 Gb
Weight: 1.4 kg (3.1 lb)
SF-1V/E1/12V/4U1S/2RS/L1(2,3,4)
Enclosure 3 (E3 in ordering options) E1 chassis, 12 VDC (11–30VDC) power supply, 4 GbE copper
Height: 146 mm (5.74 in) ports, 1 GbE SFP port, 2 RS-232 Interfaces, cellular modem for
Europe/North America AT&T/Oceania and Latin America/North
Width: 91.2 mm (3.59 in) America, Verizon wireless + AT&T
Depth: 132.6 mm (5.22 in) Note: L1(2,3,4) means that any of L1/L2/L3/L4 options can be ordered:
Weight: 1.6 kg (3.5 lb) • L1 – Europe
• L2 – North America AT&T
Power • L3 – Oceania and Latin America
• L4 – North America, Verizon wireless + AT&T
Power Supply
SF-1V/E1/12V/4U1S/2RS/L1(2,3,4)/G
Embedded isolated power supply: E1 chassis, 12 VDC (11–30VDC) power supply, 4 GbE copper
• 12V: 11–30 VDC ports, 1 GbE SFP port, 2 RS-232 ports, LTE modem for
• 48V: 44–57 VDC (Dual power inlet) Europe/North America AT&T/Oceania and Latin America/North
• WDC: 20–60 VDC (Dual power inlet) America, Verizon wireless + AT&T, integrated GPS
SF-1V/E1/12V/4U1S/2RSM/L1(2,3,4)
Power Consumption
E1 chassis, 12 VDC (11–30VDC) power supply, 4 GbE copper
Enclosure 1: < 10W ports, 1 GbE SFP port, 1 RS-232 port, 1 RS-485 port, LTE modem
Enclosure 2: < 17W (regular operation / no PoE) for Europe/North America AT&T /Oceania and Latin America/
North America, Verizon wireless + AT&T
< 77W (60W for PoE)
SF-1V/E1/WDC/4U1S/2RS/HSP
Enclosure 3: < 17W
E1 chassis, wide range 20–60V DC power supply, 4 GbE copper
ports, 1 GbE SFP port, 2 RS-232 Interfaces, HSPA+ (high-speed
packet access) modem, 3.5 Gb
SF-1V/E1/WDC/4U1S/2RS/L1(2,3,4)
E1 chassis, wide range 20–60V DC power supply, 4 GBE copper
ports, 1 GBE SFP port, 2 RS-232 Interfaces, LTE modem for
Europe/North America AT&T/Oceania and Latin America
SF-1V/E2/48V/4U1S/POE
E2 chassis, 48 VDC (44-57 VDC) power supply, 4 GBE copper
ports, 1 GBE SFP port, Power over Ethernet
SF-1V/E2/48V/4U1S/POE/2RS
E2 chassis, 48 VDC (44-57 VDC) power supply, 4 GBE copper
ports, 1 GBE SFP port, Power over Ethernet, 2 RS-232 Interfaces

5
 Data Sheet
SecFlow-1v
Ruggedized Multiservice Gateway

SF-1V/E2/48V/4U1S/POE/2RS/HSP SF-1V/E2/12V/4U1S/2RS/L1(2,3,4)/G/WF
E2 chassis, 48 VDC (44-57 VDC) power supply, 4 GBE copper E2 chassis, 12 VDC (11–30 VDC) power supply, 4 GBE copper
ports, 1 GBE SFP port, Power over Ethernet, 2 RS-232 Interfaces, ports, 1 GBE SFP port, 2 RS-232 Interfaces, LTE modem for
HSPA+ (high-speed packet access) modem, 3.5 Gb Europe/North America AT&T/Oceania and Latin America/North
SF-1V/E2/48V/4U1S/POE/2RS/L1(2,3,4) America, Verizon wireless + AT&T, integrated GPS, wireless LAN
E2 chassis, 48 VDC (44-57 VDC) power supply, 4 GBE copper SF-1V/E2/48V/4U1S/POE/2RS/HSP/G/WF
ports, 1 GBE SFP port, Power over Ethernet, 2 RS-232 Interfaces, E2 chassis, 48 VDC (44-57 VDC) power supply, 4 GBE copper
LTE modem for Europe/North America AT&T/Oceania and Latin ports, 1 GBE SFP port, Power over Ethernet, 2 RS-232 Interfaces,
America, North America, Verizon wireless + AT&T HSPA+ (high-speed packet access) modem, 3.5 Gb, integrated
GPS, wireless LAN
SF-1V/E2/48V/4U1S/2PA/2RS
E2 chassis, 48 VDC (44-57 VDC) power supply, 4 GBE copper SF-1V/E2/48V/4U1S/POE/2RS/L1(2,3,4)/L1(2,3,4)
ports, 1 GBE SFP port, two Ethernet ports with Power over E2 chassis, 48 VDC (44-57 VDC) power supply, 4 GBE copper
Ethernet for Airmux, 2 RS-232 Interfaces ports, 1 GBE SFP port, Power over Ethernet, 2 RS-232 Interfaces,
dual LTE modem for Europe/North America AT&T/Oceania and
SF-1V/E2/WDC/4U1S/2PA/2RS/HSP
E2 chassis, wide range 20–60V DC power supply, 4 GBE copper Latin America/ North America, Verizon wireless + AT&T
ports, 1 GBE SFP port, two Ethernet ports with Power over SF-1V/E2/48V/4U1S/POE/2RS/L1(2,3,4)/WF
Ethernet for Airmux, 2 RS-232 Interfaces, HSPA+ (high-speed E2 chassis, 48 VDC (44-57 VDC) power supply, 4 GBE copper
packet access) modem, 3.5 Gb ports, 1 GBE SFP port, Power over Ethernet, 2 RS-232 Interfaces,
SF-1V/E2/WDC/4U1S/2PA/2RS/L1(2,3,4) LTE modem for Europe/North America AT&T/Oceania and Latin
E2 chassis, wide range 20–60V DC power supply, 4 GBE copper America/ North America, Verizon wireless + AT&T, wireless LAN
ports, 1 GBE SFP port, two Ethernet ports with Power over SF-1V/E2/48V/4U1S/POE/2RS/L1(2,3,4)/G/LR1(LR2,LR3,LR4)
Ethernet for Airmux, 2 RS-232 Interfaces, LTE modem for E2 chassis, 48 VDC (44-57 VDC) power supply, 4 GBE copper
Europe/North America AT&T/Oceania and Latin America, North ports, 1 GBE SFP port, Power over Ethernet, 2 RS-232 Interfaces,
America, Verizon wireless + AT&T LTE modem for Europe/North America AT&T/Oceania and Latin
America/North America, Verizon wireless + AT&T, integrated
FUTURE CONFIGURATIONS GPS, LoRaWAN modem – see How to order a LoRaWAN package
Note: LR1(LR2,LR3,LR4) means that any of LR1/LR2/LR3/LR4 options can
The following ordering options are part of roadmap. RAD will be ordered:
update regarding the options availability within the official
• LR1 – LoRaWAN modem with 8 channels and frequency scheme
rollout and release announcements.
according to EU433; must be ordered with LR1 software packages
SF-1V/E2/12V/4U1S/2RS/HSP/G/WF • LR2 – LoRaWAN modem with 8 channels and frequency scheme
E2 chassis, 12 VDC (11–30 VDC) power supply, 4 GBE copper according to EU868; must be ordered with LR2 software packages
ports, 1 GBE SFP port, 2 RS-232 Interfaces, HSPA+ (high-speed • LR3 – LoRaWAN modem with 8 channels and frequency scheme
packet access) modem, 3.5 Gb, integrated GPS, wireless LAN according to AU915; must be ordered with LR3 software packages
• LR4 - LoRaWAN modem with 8 channels and frequency scheme
SF-1V/E2/12V/4U1S/2RS/HSP/G/HSP according to US915; must be ordered with LR4 software packages
E2 chassis, 12 VDC (11–30 VDC) power supply, 4 GBE copper
SF-1V/E2/WDC/4U1S/2RS/HSP/G/HSP
ports, 1 GBE SFP port, 2 RS-232 Interfaces, HSPA+ (high-speed
packet access) modem, 3.5 Gb, integrated GPS, HSPA+ (high- E2 chassis, wide range 20–60V DC power supply, 4 GBE copper
ports, 1 GBE SFP port, 2 RS-232 Interfaces, HSPA+ (high-speed
speed packet access) modem, 3.5 Gb
packet access) modem, 3.5 Gb, integrated GPS, HSPA+ (high-
SF-1V/E2/12V/4U1S/2RS/L1(2,3,4)/L1(2,3,4) speed packet access) modem, 3.5 Gb
E2 chassis, 12 VDC (11–30 VDC) power supply, 4 GBE copper
SF-1V/E2/WDC/4U1S/2RS/L1(2,3,4)/G/L1(2,3,4)
ports, 1 GBE SFP port, 2 RS-232 Interfaces, dual LTE modem for
E2 chassis, wide range 20–60V DC power supply, 4 GBE copper
Europe/North America AT&T/Oceania and Latin America, North
ports, 1 GBE SFP port, 2 RS-232 Interfaces, LTE modem for
America, Verizon wireless + AT&T
Europe/North America AT&T/Oceania and Latin America/ North
SF-1V/E2/12V/4U1S/2RS/L1(2,3,4)/G/L1(2,3,4) America, Verizon wireless + AT&T, integrated GPS, LTE modem
E2 chassis, 12 VDC (11–30 VDC) power supply, 4 GBE copper for Europe/North America AT&T/Oceania and Latin America/
ports, 1 GBE SFP port, 2 RS-232 Interfaces, LTE modem for North America, Verizon wireless + AT&T
Europe/North America AT&T /Oceania and Latin America/North
America, Verizon wireless + AT&T, integrated GPS, LTE modem SF-1V/E2/WDC/4U1S/2RS/L1(2,3,4)/RG
E2 chassis, wide range 20–60V DC power supply, 4 GBE copper
for Europe/North America AT&T /Oceania and Latin
ports, 1 GBE SFP port, 2 RS-232 Interfaces, LTE modem for
America/North America, Verizon wireless + AT&T
Europe/North America AT&T/Oceania and Latin America/ North
Note: In options with two modems, both modems are of the same type
(L1, L2, L3, or L4)
America, Verizon wireless + AT&T, extended temperature, IEC
61850-3 and IEEE-1613 compliant

6
 Data Sheet
SecFlow-1v
Ruggedized Multiservice Gateway

SF-1V/E3/48V/4U1S/POE/2RS/L1(2,3,4)/PLCD PS-ZT-STAGING
E2 chassis, 48 VDC (44-57 VDC) power supply, 4 GBE copper Local Zero Touch staging service package (one per project)
ports, 1 GBE SFP port, Power over Ethernet, 2 RS-232 Interfaces, PS-ZT-ONSITE-STAGING
LTE modem for Europe/North America AT&T/Oceania and Latin Onsite Zero Touch staging service package (one per project)
America/North America, Verizon wireless + AT&T, PLC demo, 6
digital inputs, 6 digital outputs, 6 analog inputs – see How to Please contact your local RAD partner for additional
order a PLC package configuration options

How to order a LoRaWAN package OPTIONAL ACCESSORIES

Each package includes two components: CBL-RJ45/D9/F/6FT
• SecFlow-1v with a LRx modem Serial console and RS-232 data ports cable
• One antenna RM-DIN-SINGLE
Rack Mount adaptor for single DIN RAIL device
LoRaWAN modem 1
RM-DIN-19
1. To order a SecFlow-1v device, choose one the following:
19” Rack Mount adaptor for DIN RAIL device
• SF-1V/E2/48V/4U1S/POE/2RS/L1/G/LR1
2. To order an antenna, choose: Power Supplies
• SF-ANT-LORA433-1DBI-SMA SF-AC-48VDC-40W (to be used with non-POE options)
LoRaWAN modem 2 External DIN rail AC to 48 VDC power supply, 40W, -20 to 60C (-
1. To order a SecFlow-1v device, choose one the following: 4 to 140F); 20W at 60C (140F) and above
• SF-1V/E2/48V/4U1S/POE/2RS/L1/G/LR2 SF-AC-48VDC-120W
2. To order an antenna, choose one the following: External DIN rail AC to 48 VDC power supply, 120W, -20 to 60C
(-4 to 140F); 60W at 65C (149F) and above
• SF-ANT-LORA868-2DBI-SMA
• SF-ANT-LTE700-7DBI-MGNT SF-24VDC-48VDC-240W
24 VDC to 48 VDC power supply, 240W, -40 to 50C (-40 to
LoRaWAN modem 4 122F); 120W at 65C (149F) and above
1. To order a SecFlow-1v device, choose the following:
SF-AC-12VDC-40W
• SF-1V/E2/48V/4U1S/POE/2RS/L4/G/LR4 AC to 12 VDC power supply, 40W, -20 to 60C (-4 to 140F); 20W
2. To order an antenna, choose one the following: at 65C (149F) and above
• SF-ANT-LORA868-2DBI-SMA
• SF-ANT-LTE700-7DBI-MGNT Antennas
SF-ANT4G-2M
How to order a PLC package
Outdoor antenna for SecFlow 4G cellular modem, 2m connecting
Each package includes two components: cable, 3dBi, 699-960 MHz/1710-2170 MHz/2500-2690 MHz
• SecFlow-1v with PLC capability SF-ANT4G-5M
• SW package Outdoor antenna for SecFlow 4G cellular modem, 5m connecting
1. To order a SecFlow-1v device, choose the following: cable, 3 dBi, 699-960 MHz/1710-2170 MHz/2500-2690 MHz
• SF-1V/E3/48V/4U1S/POE/2RS/L1(2,3,4)/PLCD SF-ANT-LTE700-7DBI-MGNT
Outdoor antenna for SecFlow‑1v LTE options and for LoRaWAN
2. To order a software package, choose one the following:
868 MHz
• SF-1V-SW/PLC
• SF-1V-SW/PLC/SCDFW/IDS SF-ANT-LORA433-1DBI-SMA
Outdoor antenna for LoRaWAN 433 MHz modem options
SPECIAL CONFIGURATIONS SF-ANT-LORA868-2DBI-SMA
Outdoor antenna for LoRaWAN 868 MHz modem options
Zero Touch Provisioning SF-ANT-GPS-PAS-3DBI-MAG/3M
PS-ZT-PRE_CONFIGURATION GPS passive antenna, 3m
One Zero Touch pre-configuration service package per each
SecFlow-1v unit
and either of the following:

7
 Data Sheet
SecFlow-1v
Ruggedized Multiservice Gateway

Software
For PLC options:
SF-1V-SW/PLC
Software package for SecFlow-1v, PLC - 6 digital inputs, 6 digital
outputs, 6 analog inputs
SF-1V-SW/PLC/SCDFW/IDS
Software package for SecFlow-1v, PLC - 6 digital inputs, 6 digital
outputs, 6 analog inputs, SCADA firewall for IEC-104, DNP3-TCP,
MODUBUS-TCP, Tap mode for IDS
For regular options (non-PLC or LoRa):
SF-1V-SW/SCDFW/IDS
Software package for SecFlow-1v, SCADA firewall for IEC-104,
DNP3-TCP, MODUBUS-TCP, Tap mode for IDS
SF-1V-SW/SCDFW/IDSIPS
Software package for SecFlow-1v, SCADA firewall for IEC-104,
DNP3-TCP, MODUBUS-TCP, Inline for IDS and/or IPS

International Headquarters North American Headquarters

24 Raoul Wallenberg St., Tel Aviv 6971923, Israel 900 Corporate Drive, Mahwah, NJ 07430, USA
Tel 972-3-6458181 | Fax 972-3-7604732 Tel 201-529-1100 | Toll Free: 800-444-7234 | Fax: 201-529-5777
Email [email protected] Email [email protected]

www.rad.com
715-150-09/19 (2.2) Specifications are subject to change without prior notice. © 1988–2019 RAD Data Communications Ltd. RAD products/technologies are protected by
registered patents. To review specifically which product is covered by which patent, please see ipr.rad.com. The RAD name, logo, logotype, and the product names MiNID,
Optimux, Airmux, IPmux, and MiCLK are registered trademarks of RAD Data Communications Ltd. All other trademarks are the property of their respective holders.