PNEUTRAINER-200 - Extra equipment

There are other products in the range to complement PNEUTRAINER-200.

• VAC-200
The VAC-200 equipment is particularly designed to develop skills
related to vacuum technology.
*See VAC-200 chapter for more information.

• autoSIM-200
autoSIM-200 is software that can design and simulate
pneumatic, electro-pneumatic, hydraulic circuits, etc. It is also
used for programming them plus monitoring and control of
pre-defined 2D and 3D models.
*See autoSIM-200 chapter for more information.

PNEUTRAINER-200 - Configuration
Getting the right PNEUTRAINER-200 configuration is as easy as:

• Steps to follow
1.- Select the panel and the necessary extras.

2.- Select the chosen standard set or a personalised configuration.

3.- For a personalised configuration, select the references required.

PNEUTRAINER-200

51
 PNEUTRAINER-200

PNEUTRAINER-200 - Standard kits

PNEU KITS
Ref. Description 201 202 203 204 205 206
Air preparation
SAI2091 Air cleaning unit with 3/2 distribution valve 1 1 1 1 1 1
SAI2092 Distribution block 1 1 1 1 1 1
SAI2005 Pressure regulator with pressure gauge 1 1 1 1 1 1
SAI2004 1 MPa pressure gauge 1 2 1 1 1
SAI2032 Soft start-up valve 1
Manual - mechanical valves
SAI2015 3/2 NC valve, operated by push-button 2 2 2
SAI2017 Double 3/2 NC valve, operated by a push-button 1
SAI2018 3/2 NC/NO valve, operated by a push-button 1 1 1
SAI2019 3/2 NC valve, operated by an emergency knob 1 1 1
SAI2013.1 FC 3/2 NC valve, operated by roller lever 2 4 2
SAI2014.1 FC 3/2 NC valve. Operated by one-way roller lever 1 1 1
SAI2016 3/2 NC switch-operated double valve 1 1 1
SAI2109 5/2 valve driven by push-button 1
SAI2021 5/2 valve with 2-position selector 1 1 1
SAI2025 5/3 valve with selector 1
Air operated valves
SAI2020 3/2 NC/NO, air operated single valve 1 1 1
SAI2010 3/2 NC convertible valve 1 1 1
SAI2023 Air operated 5/2 single valve 1 1 1
SAI2024 Air operated 5/2 double valve 3 3 3
SAI2107 Block of 2 x 5/2 double valves + 1 x 5/2 single valve 1
Flow control equipment
SAI2007 “OR” function 1 1 1
SAI2124 Double “OR” valve 1 1 1
SAI2006 “AND” function 1 1 1
SAI2125 Double “AND” valve 1
SAI2031 Single direction speed controller (double) 2 2 2 2 2
SAI2033 Quick exhaust valve 1 1 1
SAI2008 Check valve 1
SAI2126 Speed controller with controlled check valve 2 2
SAI2030 Two-direction speed controller for single acting cylinder 1
Actuators
SAI2027 Single acting cylinder 1 1 1 1 1
SAI2026 Double acting cylinder with rubber cushion 2 2 2 2 2
SAI2071 Double acting cylinder with adjustable air cushion 1
SAI2118 Mechanically coupled rodless cylinder 1
SAI2123 Cylinder with load 1 1
SAI2120 Stroke reading cylinder 1
Pneumatics various
SAI2029 Vacuum ejector with pad 1 1
SAI2003 Pressure indicator (reed) 1
SAI2127 Pressure vessel 1 1
SAI2121 Pulse counter for reading cylinder 1
SAI2012 Pneumatic counter 1

www.smctraining.com • [email protected] 52
 PNEU KITS
Ref. Description 201 202 203 204 205 206
Solenoid valves
SAI2050 3/2 NC single solenoid valve 1 1 1
SAI2111 3/2 double solenoid valve 1
SAI2053 5/2 double solenoid valve 3 3 3
SAI2052 5/2 single solenoid valve 2 2 2
SAI2054 5/3 closed-centre solenoid valve 1
SAI2114 Block of 2 solenoid valves, 5/2 double + 1 single 1
Control modules
SAI2056 Power supply 1 1 1 1
SAI2035 ON/OFF switch 1
SAI2034 Emergency stop knob (electrical) 1
SAI2036 Set of electrical inputs (Button pad with 3 push-buttons) 1 1 1
SAI2038 Set of 3 relays 1 2 1
SAI2047 Indicators (pilots, buzzer) 1 1 1
SAI2040 Set of 2 timer relays 1
SAI2048 Electric counter 1
SAI2049 Electrical distributor 1 1 1
SAI2043 Reed auto switch 4 4 4
SAI2128 Solid state auto switch 2
SAI2044 Inductive detector 1
SAI2046 Capacitive detector 1
SAI2045 Photoelectric detector 1
SAI2042 Electrical end of stroke 2 2 2
P/V - V/P converters
SAI2041 Electrical contact pressure switch 1 1 1
SAI2095 Pressure switch, towards transistor 1
SAI2098 Pressure gauge with electrical contact 1 1 1
SAI2097 Programmable digital pressure switch. Analog / digital outputs 1 1
SAI2096 Vacuum pressure switch, towards transistor 1
SAI2099 Programmable proportional electro-pneumatic transducer 1
SAI2104 Analog pressure sensor 1
SAI2105 Digital Pressure Display for analog sensor 1
Accessories
SAI2057 Set of 20m of blue tubing and 20m of flexible 4 mm white tubing. 1 1 1 1 1 1
SAI2058 Set of 10 “T” fittings 1 1 1 1 1 1
SAI2059 Set of 5 plugs, 1/8” 1 1 1 1 1 1
SAI2060 Set of 10 x 4mm plastic plugs 1 1 1 1 1 1
SAI2132 Set of 10 “Y” fittings 1 1
SAI2055 Set of connection cables 1 1 1 1
TK-3 Tube-cutter 1 1 1 1 1 1
SAI2076 Box with trays for basic pneumatics composition 1
SAI2078 Box with trays for advanced pneumatics composition 1
SAI2077 Box with trays for basic electro-pneumatics composition 1
SAI2079 Box with trays for advanced electro-pneumatics composition 1
SAI2062 Box with trays for pneumatic-electropneumatic composition 1
SAI2602 Box with trays for proportional pneumatic composition 1
SAI2307 10 m. tube black. ø6mm 1 1 1 1 1 1
TG-1 Tube-extractor 1 1 1 1 1 1
Didactic supports
SAI2061 Set of manuals and documentation 1 1 1 1 1 1
SAI2070 CD-ROM, Pneumatic slides 1 1 1 1 1 1
! DON’T FORGET TO ADD AN ASSEMBLY PANEL AND EXTRAS
SAI2068 Schematic clip device SAI2028 Support bracket set
SAI2064 Vertical mounting panel for 2 work posts SAI2088 Silent compressor
SAI2074 Drawer unit for rolling table with lock SAI2080 Horizontal mounting panel
PNEUTRAINER-200

SAI2066 Drawer unit for rolling table without lock SAI2089 Cable holder fitting
SAI2065 Rolling table with twin-post

53
 PNEUTRAINER-200

PNEUTRAINER-200 - Customized sets

All the available pneumatic and electro-pneumatic components are described below, ordered
by category.

Assembly panels and accessories

Based on an anodized extruded aluminium structure, we can offer a number of panels solutions for the
various configurations.

• Option A - Horizontal mounting panel

SAI2080 - Horizontal mounting panel
External dimensions: 700x560x25mm*. It is supported on non-slip
legs. Can be converted into a vertical panel using a support bracket
set (see accessories).
*Other dimensions available on request.

• Option B - Vertical mounting panel for 2 work positions

SAI2064 - Vertical mounting panel for 2 work positions
External dimensions: 1150x760x410mm*. Allows work to be carried
out on both sides, optimizing investment and space.
*Other dimensions available on request.

• Option C - Rolling table with twin-post

SAI2065 - Rolling table with twin-post
- The entire rolling frame system may be disassembled for
transportation.
- The vertical panel means you can work on both sides.
- Panel dimensions: 1150x760x25mm
- It has a laminated top for horizontal work, 1200x800mm.
- The lower section features a 1200x600mm metal shelf supporting
the component storage drawers, the silent compressor, etc.
- 4 high-load wheel support, 2 with brake and 2 without.
- Total dimensions: 1200x800x1700mm.

www.smctraining.com • [email protected] 54
• Accessories
SAI2028 - Support bracket set

With non-slip legs, allowing the user to convert the horizontal mounting
panel into a vertical panel.

Storage drawer blocks for rolling table

SAI2066 - without lock
SAI2074 - with lock
- Compact 4-drawer block with slide guides to house the
component trays.
- External dimensions: 500x725x650mm.

SAI2088 - Silent compressor

- Model ICO-P50
- Two-phase power supply: 230V.
- Flow rate: 50l/min.
- Maximum pressure: 0,8MPa
- Low noise level: 40dB
- Reservoir: 9 l.
- Weight: 21kg.
*Other models available on request.

SAI2068 - Schematic clip device

Allows schematics to be attached in DIN-A4 format on the
panel.

SAI2089 - Cable holder fitting

This supports orderly storage of connection cables.

PNEUTRAINER-200

55