Modulation

Dasar Sistem Telekomunikasi

Pradini Puspitaningayu, Ph.D.

Teknik Elektro Universitas Negeri Surabaya 1
 š Modulation
š Analog Modulation.
š AM

OUTLINE š FM
š PM
š Digital Modulation.

2
 Modulation
Operation of varying amplitude, frequency or phase of carrier signal accordingly
with the instantaneous amplitude of the message signal.

3
 Modulation Types

• Analog modulation • Digital modulation

4
 šAnalog Modulation:
šBaseband signal is always analog for this
modulation. Therearethree properties of
a carrier signal amplitude, frequency and
Analog phase thus therearethreebasic types of
analog modulations.
Modulation
šAmplitude Modulation (AM)
šFrequency Modulation (FM)
šPhase modulation(PM)

5
Analog Modulation

6
Amplitude Modulation(AM)
7
 AmplitudeModulation(AM)

- The Modulating Signal (message or baseband signal)

m(t )
- The Carrier Signal is

cos(wct ) where wc = 2pf c

- The Modulated Signal

SAM (t ) = Ac cos(wct ) + m(t ) cos(wct )

= [Ac + m(t )]cos(wct ) 8
9
10
 Standard AM Modulation

- The envelope of the modulated signal has the same shape

as the baseband signal provided the following two
requirements are satisfied
1. The carrier frequency fc must be much greater then the
highest frequency components fm of the message signal
m(t) i.e. fc >> fm
2. The modulation index must be less than unity; if the
modulation index is greater than unity, the carrier wave
becomes over modulated.

11
 Modulation Index

- Let Am the peak amplitude of m(t) and Ac is the carrier

amplitude.
- The modulation index is defined as:
Am
µ =
Ac
- The 0 £ µ £ 1 is a required condition to do the
demodulation.

12
Over Modulation

13
 Demodulation

- In the standard AM modulation, the modulation index

should be in order to demodulate the received modulated
signal by using an envelope detector.

14
Frequency Modulation(FM)

15
 Frequency Modulation (FM)

is a process of changing the frequency of a carrier signal in

accordance with the message signal (modulating signal).

16
 FM Modulation
- Note that there are no amplitude variations in the FM.
- The envelope of an FM modulated signal is a constant.

17
 FM Modulation

— Frequency modulation (FM) and phase modulation (PM) are

types of what is called Angle modulation.

— The FM and PM characterized by their superior performance

(compared to AM) in the presence of noise at the expense of
higher bandwidth requirements.

18
 Angle Modulation

- Consider a sinusoid:
Ac cos (ωct+φ)
where
1. Ac is the (constant) amplitude,
2. ωc is the (constant) frequency
3. and φ is the initial phase.

Let the sinusoid be written as:

Ac cos [θ(t)]
where θ(t) = ωct+φ.

19
 FM Modulation
- In frequency modulation the angle θ(t) is varied linearly with the
integral of message signal m(t) as:

t
q (t ) = wc t + k f ò m(a ) da
-¥
where kf is the frequency deviation.

- Thus the frequency modulated signal is defined as:

æ t ö
S FM (t ) = Ac cosçç wc t + k f ò m(a ) da ÷÷
è -¥ ø

20
 FM Modulation

- In Frequency modulation, the frequency of a carrier signal deviates

from its center frequency by an amount that is proportional to the
message signal amplitude.

- FM uses the message signal, m(t), to vary the carrier frequency within
some small range about its original value.

21
 FM Modulation

- Frequency deviation is the positive or negative change in the carrier

frequency from its center frequency.

- When the message signal amplitude is zero, there is no change in the

FM carrier frequency; the carrier is at its center frequency.

22
 FM Modulation
- An FM modulated signal has its instantaneous frequency that varies linearly
with the amplitude the message signal.

23
Phase Modulation(PM)

24
 PM Modulation
- In phase modulation (PM), the carrier signal changes its
phase with the changes in the message signal amplitude.

- FM and PM are types of what is called Angle

modulation.

25
26
 PM Modulation

- FM and PM are interrelated; one cannot change without

the other changing.

- In FM, the frequency of a carrier signal deviates from its

center frequency by an amount that is proportional to the
message signal amplitude.

- In PM, the frequency (and phase) of a carrier signal

changes by an amount that is proportional to the message
signal amplitude and frequency.

27
 PM Modulation
- FM requires the carrier’s frequency to deviate both above
and below its center frequency.

- During the process of frequency modulation, the peaks of

each successive cycle in the FM modulated waveform occur at
times other than they would if the carrier were un modulated.

- This is actually an incidental phase shift that takes place

along with the frequency shift in FM.

28
 PM Modulation
- Just the opposite action takes place in phase modulation.

- Notice that the time period of each successive cycle varies

in the modulated wave according to the audio-wave
variation.

- Since frequency is a function of time period per cycle, we

can see that such a phase shift in the carrier will cause its
frequency to change.

29
 PM Modulation

- In Frequency modulation, the frequency of a carrier signal

deviates from its center frequency by an amount that is
proportional to the message signal amplitude.

- FM uses the message signal, m(t), to vary the carrier

frequency within some small range about its original value.

30
 Digital Modulation

• Digital Modulation:
• Digital modulation in somewhat similar to the analog modulation except base band
signal is of discrete amplitude level. For binary signal it has only two level, either high
or logic 1 or low or logic 0. The modulation scheme is mainly three types.

1. ASK or Amplitude shift Key

2. FSK or Frequency shift key
3. PSK or Phase shift key

31
Digital Modulation

32
Thank You

33