Scribd Logo
Upload

Welcome to Scribd!

  • 13 views

    IP MS 14 Tiling & Flooring (Walls & Floor)

    Uploaded by

    Zubair Ahmed Khaskheli
    The document provides guidelines for tiling work, including preparing surfaces, selecting tiles, laying tiles with mortar, grouting joints, curing, and safety procedures. It describes responsibilities, procedures, tools, references, and related documents.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    IP MS 14 Tiling & Flooring (Walls & Floor)

    Uploaded by

    Zubair Ahmed Khaskheli
    13 views4 pages
    The document provides guidelines for tiling work, including preparing surfaces, selecting tiles, laying tiles with mortar, grouting joints, curing, and safety procedures. It describes responsibilities, procedures, tools, references, and related documents.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides guidelines for tiling work, including preparing surfaces, selecting tiles, laying tiles with mortar, grouting joints, curing, and safety procedures. It describes responsibilities, procedures, tools, references, and related documents.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    13 views4 pages

    IP MS 14 Tiling & Flooring (Walls & Floor)

    Uploaded by

    Zubair Ahmed Khaskheli
    The document provides guidelines for tiling work, including preparing surfaces, selecting tiles, laying tiles with mortar, grouting joints, curing, and safety procedures. It describes responsibilities, procedures, tools, references, and related documents.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 4

    Doc No: IP/MS-14

    TILING & FLOORING (WALLS & FLOOR) Rev: 01


    Page: 1 of 4

    METHOD STATEMENT
    FOR
    TILING & FLOORING (WALLS & FLOOR)

    01 Introduction of HSE Instructions 12 Oct, 04 M Ashraf MSC AKK

    0 Method Statement for Tiling & Flooring 24 July, 03 M Ashraf MSC AKK
    (Walls & Floor)

    Do not Duplicate, Controlled Copy If Stamped In Red


    Descon Engineering Limited
    Doc No: IP/MS-14
    TILING & FLOORING (WALLS & FLOOR) Rev: 01
    Page: 2 of 4

    Rev. No. Details Of Revision Date Prepared by Checked by Approved by

    1. OBJECTIVE
    The objective of this method statement is to provide general guidelines for all the tiling
    work.
    2. SCOPE
    This method statement covers the activities of laying any type of tiles on walls and floors
    at all project sites.

    3. REFERENCES

    Construction drawings & specifications

    4. DEFINITIONS

    CAR Corrective Action Request


    HSE Health, Safety and Environment
    QIP Quality Inspection Plan
    Doc. Document

    5. RESPONSIBILITIES

    Construction Manager shall be responsible for implementation of this method


    statement.

    6. PROCEDURE
    6.1 Quality Inspection Plan (QIP) specific to project requirements shall be made and
    inspection activities shall be recorded either on the formats as given under
    “Related Documents” or those supplied by customer.

    6.2 Get the specified sample of tiles approved from customer/consultant.

    6.3 The tiles shall have uniform texture and straight edges.

    6.4 The tiles shall be true, even on face and of uniform thickness throughout.

    6.5 The floor layout shall be at pattern to permit setting of tile with a minimum of
    cutting.

    6.6 All the dimensions shall be controlled to avoid setting tile smaller than one half
    size.

    6.7 The tiles shall be cut with a suitable cutting tool and rough edges shall be rubbed
    smooth.

    6.8 The edges shall be tooled slightly concave.

    6.9 The tiles shall be skillfully laid with ordinary Portland cement and sand mortar as
    mentioned in the project specifications.

    Do not Duplicate, Controlled Copy If Stamped In Red


    Descon Engineering Limited
    Doc No: IP/MS-14
    TILING & FLOORING (WALLS & FLOOR) Rev: 01
    Page: 3 of 4

    6.10 All joints shall be properly grouted with white cement or in accordance with the
    project specifications.

    6.11 All joints shall be straight, level, perpendicular and have even width. Vertical joint
    shall be maintained plumb for the entire height of the tile work.

    6.12 The tiling work shall be cured as per period mentioned in project specifications or
    for at least 10 days.

    6.13 In case of non-conformity at any stage of inspection, the segregation shall be


    covered by method statement No. QA&QC/MS-02 and Corrective Action Request
    (CAR) shall be raised as per standard operating procedure No. QA&QC/SOP-04.

    7. TOOLS AND EQUIPMENTS

    Tile Cutting Machine, Hand Tools, Plumb Lines, Mortar Mixing Pans.

    8. HSE INSTRUCTIONS

    8.1 Hand gloves must be used while doing the job.

    8.2 Tiles of same size must be separated before start of job.

    8.3 While cutting the tiles, the worker must wear the safety glasses.

    8.4 Extra material on tiles must be cleared immediately after the fixing of tiles.

    8.5 First make the outer boundary of tiles, so that the cutting/wastage can be
    minimized.

    8.6 No trash, rapes, shopping bags, papers, cans, bottles or any other litter should
    be left in the open.

    8.7 Any liquid fuel spills and accidental waste disposal should be avoided and
    properly cleaned up.

    8.8 Keep your environment clean.

    9. RELATED DOCUMENTS

    9.1 Related Drawings & Customer’s Specifications.

    9.2 QA&QC/FRM-161 Soil Compaction Check List

    9.3 QA&QC/FRM-163 E//Work , Road Work & Flexible Paving Inspection

    Report

    Do not Duplicate, Controlled Copy If Stamped In Red


    Descon Engineering Limited
    Doc No: IP/MS-14
    TILING & FLOORING (WALLS & FLOOR) Rev: 01
    Page: 4 of 4

    9.4 QA&QC/FRM-187 Aggregate Combination Calculation Sheet

    9.5 QA&QC/FRM-188 Gradation Chart

    9.6 QA&QC/FRM-199 Material Approval Form

    9.7 QA&QC/FRM-200 Foundation Inspection Report

    9.8 .QA&QC/FRM-203 Concrete Placement Report

    9.9 QA&QC/FRM-210 Sewerage & Drainage Piping Installation

    9.10 QA&QC/FRM-232 Earthing System Check Report

    9.11 QA&QC/FRM-08 Corrective Action Request

    Do not Duplicate, Controlled Copy If Stamped In Red


    Descon Engineering Limited

    You might also like