Scribd
Upload
2K views5 pages

Course ID 01070529 1

This document contains 15 multiple choice questions about printer parts and specifications. Question 1 asks about the recommended relative humidity range for the printers, with the answer being 20-80% RH. Question 2 asks about the maximum stack height for Tray 1, with the answer being approximately 50 sheets of 75 g/m2 paper. Question 3 asks about the assembly that transfers all 4 colors from the drums, with the answer being Intermediate Transfer Belt (ITB).

Uploaded by

Juan Manuel Sánchez Redondo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views5 pages

Course ID 01070529 1

This document contains 15 multiple choice questions about printer parts and specifications. Question 1 asks about the recommended relative humidity range for the printers, with the answer being 20-80% RH. Question 2 asks about the maximum stack height for Tray 1, with the answer being approximately 50 sheets of 75 g/m2 paper. Question 3 asks about the assembly that transfers all 4 colors from the drums, with the answer being Intermediate Transfer Belt (ITB).

Uploaded by

Juan Manuel Sánchez Redondo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Question 1 of 15

The recommended relative humidity (RH) range for these printers is:

30% to 70% RH

10% to 80% RH

20% to 80% RH

35% to 75% RH

Question 2 of 15

The maximum stack height for Tray 1 is:

approximately 50 sheets of 75 g/m2 (20 lb) paper

approximately 100 sheets of 75 g/m2 (20 lb) paper

approximately 75 sheets of 75 g/m2 (20 lb) paper

approximately 200 sheets of 75 g/m2 (20 lb) paper

Question 3 of 15

What is the name of the assembly that transfers all 4 colors from the drums?

Bridge Unit (BU)

Intermediate Paper Transfer Unit (IPTU)

Intermediate Transfer Belt (ITB)

Paper Transfer Belt (PTB)

Question 4 of 15

This study source was downloaded by 100000869358177 from CourseHero.com on 09-27-2023 21:58:31 GMT -05:00

https://www.coursehero.com/file/172922463/Course-ID-01070529-1rtf/
What is the name of the assembly that transports the paper from the printer to the external
finisher?

Bridge Unit (BU)

Intermediate Paper Transfer Unit (IPTU)

Intermediate Transfer Belt (ITB)

Paper Transfer Belt (PTB)

Question 5 of 15

On the E825... mono models, what is the name of the assembly that transfers toner from the
drum to the paper?

Transfer roller (TR)

Paper Transfer Belt (PTB)

Intermediate Paper Transfer Unit (IPTU)

Intermediate Transfer Belt (ITB)

Question 6 of 15

On the E876... color models, what is the name of the assembly that transfers toner to the paper?

Transfer roller (TR)

Paper Transfer Belt (PTB)

Intermediate Paper Transfer Unit (IPTU)

Intermediate Transfer Belt (ITB)

Question 7 of 15

This study source was downloaded by 100000869358177 from CourseHero.com on 09-27-2023 21:58:31 GMT -05:00

https://www.coursehero.com/file/172922463/Course-ID-01070529-1rtf/
The consumer version and FIPS 140 version of the HDDs:

are interchangeable

are not interchangeable

need to be formatted before use

should have their admin password changed when installed

Question 8 of 15

Which two rollers make sure that a single sheet of paper is moved into the paper path?

feed and separation rollers

feed and transfer rollers

pickup and feed rollers

registration and reverse rollers

Question 9 of 15

When a main board needs to be replaced, the MSOK PCA must be reinstalled to the new main
board to retain system information.

True

False

Question 10 of 15

To prevent the toner from hardening and not working properly, a developer unit must be stored
at or below:

This study source was downloaded by 100000869358177 from CourseHero.com on 09-27-2023 21:58:31 GMT -05:00

https://www.coursehero.com/file/172922463/Course-ID-01070529-1rtf/
40°C (104°F)

45°C (113°F)

50°C (122°F)

55°C (131°F)

Question 11 of 15

What is the output power rating for the LVPS (Type 3) found in models E82540, E82550, and
E82560?

1200 Watts

115 Volts

164 Watts

240 Volts

Question 12 of 15

To prevent damage when shipping or moving the printer, you must do the following:

Lock the FR carriage

Lock the FR and HR carriages

Lock the HR carriage

Remove the scan locking screw

Question 13 of 15

On the E825... mono units, the Laser Scanner unit emits a laser onto the drum from which
direction?

This study source was downloaded by 100000869358177 from CourseHero.com on 09-27-2023 21:58:31 GMT -05:00

https://www.coursehero.com/file/172922463/Course-ID-01070529-1rtf/
the lef

the right

above

below

Question 14 of 15

On the E876... color units, the Laser Scanner unit emits a laser onto the drums from which
direction?

the lef

the right

above

below

Question 15 of 15

The E825... mono and the E876... color units use the same fuser.

True

False

11/15

73%

This study source was downloaded by 100000869358177 from CourseHero.com on 09-27-2023 21:58:31 GMT -05:00

https://www.coursehero.com/file/172922463/Course-ID-01070529-1rtf/
Powered by TCPDF (www.tcpdf.org)

You might also like