SBL1040CT, SBLB1040CT

www.vishay.com
Vishay General Semiconductor
Dual Common Cathode Schottky Rectifier
FEATURES
TO-220AB D2PAK (TO-263AB)
• Power pack
• Guardring for overvoltage protection
K
• Low power loss, high efficiency
• Low forward voltage drop
2 • High forward surge capability
• High frequency operation
3 1
2 • Meets MSL level 1, per J-STD-020, LF maximum peak of
1 245 °C (for D2PAK (TO-263AB) package)
SBL1040CT SBLB1040CT
PIN 1 PIN 2 PIN 1 K • Solder bath temperature 275 °C maximum, 10 s, per
CASE
JESD 22-B106 (for TO-220AB package)
PIN 3 PIN 2 HEATSINK
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESIGN SUPPORT TOOLS click logo to get started
TYPICAL APPLICATIONS
Models For use in low voltage, high frequency rectifier of switching
Available
mode power supplies, freewheeling diodes, DC/DC
converters, and polarity protection application.

PRIMARY CHARACTERISTICS MECHANICAL DATA

IF(AV) 2x5A Case: TO-220AB, D2PAK (TO-263AB)
VRRM 40 V Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
IFSM 175 A
Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified
VF 0.55 V (“_X” denotes revision code, e.g. A, B, ...)
TJ max. 125 °C Terminals: matte tin plated leads, solderable per
Package TO-220AB, D2PAK (TO-263AB) J-STD-002 and JESD 22-B102
Circuit configuration Common cathode
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: as marked
Mounting Torque: 10 in-lbs maximum

MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL SBL1040CT UNIT
Maximum repetitive peak reverse voltage VRRM 40
Working peak reverse voltage VRWM 28 V
Maximum DC blocking voltage VDC 40

Maximum average forward rectified current  total device 10

IF(AV)
at TC = 107 °C per diode 5.0 A
Peak forward surge current 8.3 ms single half sine-wave superimposed
IFSM 175
on rated load per diode
Operating junction and storage temperature range TJ, TSTG -40 to +125 °C

Revision: 19-Sep-2018 1 Document Number: 88726

For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 SBL1040CT, SBLB1040CT
www.vishay.com
Vishay General Semiconductor

ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL TEST CONDITIONS VALUE UNIT
Maximum instantaneous forward voltage per diode VF (1) 5.0 A 0.55 V

Maximum instantaneous reverse current at DC blocking voltage TC = 25 °C 0.5

IR (2) Rated VR mA
per diode TC = 100 °C 50
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: pulse width  40 ms

THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL SBL SBLB UNIT
Typical thermal resistance per diode RJC 3.0 3.0 °C/W

ORDERING INFORMATION (Example)

PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE
TO-220AB SBL1040CT-E3/45 1.85 45 50/tube Tube
TO-263AB SBLB1040CT-E3/45 1.35 45 50/tube Tube
TO-263AB SBLB1040CT-E3/81 1.35 81 800/reel Tape and reel
TO-263AB SBLB1040CTHE3_B/P (1) 1.35 P 50/tube Tube
TO-263AB SBLB1040CTHE3_B/I (1) 1.35 I 800/reel Tape and reel
Note
(1) AEC-Q101 qualified, available in D2PAK (TO-263AB) package only

Revision: 19-Sep-2018 2 Document Number: 88726

For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 SBL1040CT, SBLB1040CT
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TC = 25 °C unless otherwise noted)

12.5 100
Resistive or Inductive Load

Instantaneous Reverse Current (mA)

TJ = 125 °C
Average Forward Current (A)

10 10

7.5 1 TJ = 75 °C

5 0.1

TJ = 25 °C
2.5 0.01

0 0.001
0 50 100 150 0 20 40 60 80 100
Case Temperature (°C) Percent of Rated Peak Reverse Voltage (%)

Fig. 1 - Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics Per Diode

300 10 000
TJ = TJ Max. TJ = 25 °C
8.3 ms Single Half Sine-Wave f = 1.0 MHz
Peak Forward Surge Current (A)

250 Vsig = 50 mVp-p

Junction Capacitance (pF)

200

150 1000

100

50

0 100
1 10 100 0.1 1 10 100
Number of Cycles at 60 Hz Reverse Voltage (V)

Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 5 - Typical Junction Capacitance Per Diode
Per Diode

100 100
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)

TJ = 125 °C
10
10
TJ = 25 °C

1
0.1
Pulse Width = 300 µs
1 % Duty Cycle

0.01 0.1
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.01 0.1 1 10 100
Instantaneous Forward Voltage (V) t - Pulse Duration (s)

Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance Per Diode
Per Diode

Revision: 19-Sep-2018 3 Document Number: 88726

For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 SBL1040CT, SBLB1040CT
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

TO-220AB
0.415 (10.54) max.
0.370 (9.40) 0.154 (3.91) 0.185 (4.70)
0.148 (3.74) 0.175 (4.44)
0.360 (9.14)
0.055 (1.39)
0.113 (2.87)
0.045 (1.14)
0.103 (2.62)

0.145 (3.68)
0.135 (3.43)
0.635 (16.13) 0.603 (15.32)
PIN 0.625 (15.87) 0.573 (14.55)
0.350 (8.89)
1 2 3 0.330 (8.38)
0.160 (4.06)
1.148 (29.16)
0.140 (3.56) 1.118 (28.40) 0.110 (2.79)
0.057 (1.45) 0.100 (2.54)
0.045 (1.14) 0.560 (14.22)
0.530 (13.46)
0.105 (2.67)
0.095 (2.41) 0.035 (0.90)
0.028 (0.70)
0.104 (2.65)
0.096 (2.45) 0.205 (5.20) 0.022 (0.56)
0.195 (4.95) 0.014 (0.36)

D2PAK (TO-263AB) Mounting Pad Layout

0.411 (10.45) 0.190 (4.83)
0.42 (10.66) min.
0.380 (9.65) 0.160 (4.06) 0.055 (1.40)
0.245 (6.22) 0.045 (1.14)
MIN.
K
0.33 (8.38) min.
0.055 (1.40)
0.360 (9.14)
0.047 (1.19)
0.320 (8.13) 0.624 (15.85) 0.670 (17.02)
1 K 2 0.591 (15.00) 0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79) 0.15 (3.81) min.
0.037 (0.940) 0.090 (2.29)
0.021 (0.53)
0.027 (0.686) 0.08 (2.032) MIN.
0.014 (0.36)
0.105 (2.67)
0.095 (2.41) 0.140 (3.56)
0.205 (5.20) 0.110 (2.79) 0.105 (2.67)
0.195 (4.95) 0.095 (2.41)

Revision: 19-Sep-2018 4 Document Number: 88726

For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

Revision: 09-Jul-2021 1 Document Number: 91000