CSE 412 Database Management

Lecture 20 Concurrency Control II

Jia Zou
Arizona State University
Review
Conflicting Operations
• We need a formal notion of equivalence that can be implemented
efficiently…
• Base it on the notion of “conflicting” operations
• Definition: Two operations conflict if:
• They are by different transactions
• They are on the same object and at least one of them is a write
Conflict Serializable Schedules
• Two schedules are conflict equivalent iff:
• They involve the same actions of the same transactions, and
• Every pair of conflicting actions is ordered the same way.
• Schedule S is conflict serializable if:
• S is conflict equivalent to some serial schedule.
Dependency Graphs
• One node per txn.
• Edge from Ti to Tj if:
• An operation Oi of Ti conflicts with an
operation Oj of Tj and
• Oi appears earlier in the schedule than Oj
• Also known as a “precedence graph”
Dependency Graphs
• Theorem: A schedule is conflict serializable if and only if its
dependency graph is acyclic.
Example #1
Example #1 Not conflict serializable!
Example #2 – Lost Update
Example #2 – Lost Update

Not conflict serializable!

Example #3 – Threesome
Example #3 – Threesome
• Q: Is this equivalent to a serial execution?
• A: Yes (T2, T1, T3)
• Notice that T3 should go after T2, although it starts before it!

Conflict serializable!
Example #4 – Inconsistent Analysis
Example #4 – Inconsistent Analysis
Example #4 – Inconsistent Analysis
Example #4 – Inconsistent Analysis

Not conflict serializable!

Two-Phase Locking
• Executing with Locks
Two-Phase Locking
• Phase 1: Growing
• Each txn requests the locks that it needs from the DBMS’s lock manager.
• The lock manager grants/denies lock requests.
• Phase 2: Shrinking
• The txn is allowed to only release locks that it previously acquired. It cannot
acquire new locks.
Two-Phase Locking
• The txn is not allowed to acquire/upgrade locks after the growing
phase finishes.
Two-Phase Locking
• The txn is not allowed to acquire/upgrade locks after the growing
phase finishes.
Executing with 2PL
Executing with 2PL
Two-Phase Locking
• 2PL on its own is sufficient to guarantee conflict serializability (i.e.,
schedules whose precedence graph is acyclic), but, it is subject to
cascading aborts
2PL – Cascading Aborts
Strict Two-Phase Locking
• To fix the dirty-reads problem
• Intuitively: Release all locks at the
end of a txn
• A schedule is strict if a value written
by a txn is not read or overwritten by
other txns until that txn finishes.
• Advantages:
• Does not incur cascading aborts.
• Aborted txns can be undone by just
restoring original values of modified
tuples.
Examples
• T1: Move $50 from A’s account to B’s account.
• T2: Compute the total amount in all accounts and return it to the
application.
Non-2PL Example
2PL Example
Strict 2PL Example
Today’s Agenda
• Deadlocks
• Concurrency Control based on Time Ordering Optional!
• Multi-version Concurrency Control
Deadlocks (Optional)
• Deadlock: Cycle of transactions waiting for locks to be released by
each other.
• Two ways of dealing with deadlocks:
• Deadlock detection
• Deadlock prevention
Deadlock Detection
• The DBMS creates a waits-for graph:
• Nodes are transactions
• Edge from Ti to Tj if Ti is waiting for Tj to release a lock
• The system periodically check for cycles in waits-for graph.
Deadlock Detection
Deadlock Detection
Deadlock Detection
Solutions to Deadlock
• Deadlock handling
• Select a “victim” transaction, and rollback it back to break the deadlock.
• Deadlock prevention
• When a txn tries to acquire a lock that is held by another txn, kill one of them
to prevent a deadlock.
• No waits-for graph or detection algorithm.
Summary
• Concurrency Control Summary
• Conflict Serializability ↔ Correctness
• Automatically correct interleavings:
• Locks + protocol (2PL, S2PL ...)
• Deadlock detection and prevention
Concurrency Control
• Two-Phase Locking (2PL)
• Determine serializability order of conflicting operations at runtime while txns
execute.
• Timestamp Ordering (T/O)
• Determine serializability order of txns before they execute.
Concurrency Control
• Two-Phase Locking (2PL)
• Determine serializability order of conflicting operations at runtime while txns
execute.
• Timestamp Ordering (T/O) Optiona
l
• Determine serializability order of txns before they execute.
Timestamp Allocation
• Each txn Ti is assigned a unique fixed timestamp that is monotonically
increasing.
• Let TS(Ti ) be the timestamp allocated to txn Ti
• Different schemes assign timestamps at different times during the txn.
• Multiple implementation strategies:
• System Clock.
• Logical Counter.
• Hybrid.
T/O Concurrency Control
• Use these timestamps to determine the serializability order.
• If TS(Ti ) < TS(Tj ), then the DBMS must ensure that the execution
schedule is equivalent to a serial schedule where Ti appears before Tj .
Basic T/O
• Txns read and write objects without locks.
• Every object X is tagged with timestamp of the last txn that
successfully did read/write:
• W-TS(X) – Write timestamp on X
• R-TS(X) – Read timestamp on X
• Check timestamps for every operation:
• If txn tries to access an object “from the future”, it aborts and restarts.
Basic T/O – Reads
• If TS(Ti ) < W-TS(X), this violates timestamp order of Ti w.r.t. writer of
X.
• Abort Ti and restart it with a newer Ts
• Else:
• Allow Ti to read X.
• Update R-TS(X) to max(R-TS(X), TS(Ti ))
• Have to make a local copy of X to ensure repeatable reads for Ti .
Basic T/O - Writes
• If TS(Ti ) < R-TS(X) or TS(Ti ) < W-TS(X)
• Abort and restart Ti with a newer Ts.
• Else:
• Allow Ti to write X and update W-TS(X)
• Also have to make a local copy of X to ensure repeatable reads for Ti .
Basic T/O – Example #1
Basic T/O – Example #1
Basic T/O – Example #1
Basic T/O – Example #1
Basic T/O – Example #1
Basic T/O – Example #1
Basic T/O – Example #1
Basic T/O – Example #1
Basic T/O – Example #2
Basic T/O – Example #2
Basic T/O – Example #2
Basic T/O – Example #2
Basic T/O
• Ensures conflict serializability.
• No deadlocks because no txn ever waits.
• Possibility of starvation for long txns if short txns keep causing
conflicts.
Multi-Version Concurrency Control
• Writes create new versions of objects (global copies) instead of in-
place updates:
• Each successful write results in the creation of a new version of the data item
written.
• Use write timestamps to label versions.
• Let Xk denote the version of X created by a given txn Ti : W-TS(Xk) = TS(Ti )
MVCC – Reads
• Any read operation sees the latest version of an object right before
that txn started.
• Every read request can be satisfied without blocking the txn.
• If TS(Ti ) > R-TS(Xk):
• Set R-TS(Xk) = TS(Ti )
MVCC – Writes
• If TS(Ti ) < R-TS(Xk):
• Abort and restart Ti .
• If TS(Ti ) = W-TS(Xk):
• Overwrite the contents of Xk.
• Else:
• Create a new version of Xk+1 and set its write timestamp to TS(Ti ).
MVCC
• Can still incur cascading aborts because a txn sees uncommitted
versions from txns that started before it did.
• Old versions of tuples accumulate.
• The DBMS needs a way to remove old versions to reclaim storage
space.
MVCC Implementations
• Store versions directly in main tables:
• Postgres, Firebird/Interbase
• Store versions in separate temp tables:
• MSFT SQL Server
• Only store a single master version:
• Oracle, MySQL
MVCC – Performance Issues
• High abort overhead cost.
• Garbage collection overhead.
• Requires stalls to ensure recoverability.
• Secondary index updates.
Real Systems