Site & Area

Garage and Canopy Dualselect

60W and 90W

Stonco Garage and Canopy DualSelect LED luminaire is exactly what you need Project:

when searching for durable, cost-effective lighting for parking garages, Location:

covered walkways and outdoor canopies. Compact and efficient, it has Cat.No:

durable, weather tight construction and a rugged, UV-stabilized lens. Type:

Lamps: Qty:

Notes:

Ordering guide Example: GC60-SCT-G2-SM-5-10-BZ

Luminaire LED Color Generation Mounting Distribution Voltage Finish

SCT G2 SM 5 10 BZ

GC60 SCT Selectable G2 Generation 2 SM Surface Mount 5 Type 5 Symmetric 10 120-347V BZ Bronze
Garage & Canopy LED 3000K,4000K &
28W-40W-60W 5000K, 70CRI
GC90
Garage & Canopy LED
70W-80W-90W

LED Wattage and Lumen Values

 Ordering Codes Total LEDs System Current Color Temp.(K) Average System Lumen Output 1,2 Efficacy Weight
(mA) Wattage1 (lm) (LPW) (kg)

230 @ 120V 3000/4000/5000 28 4100/4250/4250 145/150/150

GC60-SCT-G2-SM-5-10-BZ 168 330 @ 120V 3000/4000/5000 40 5600/6000/5900 140/150/145 2
500 @ 120V 3000/4000/5000 60 7550/8350/7900 125/140/130

583 @ 120V 3000/4000/5000 70 9800/10500/10350 140/150/145

GC90-SCT-G2-SM-5-10-BZ 280 667 @ 120V 3000/4000/5000 80 10800/11700/11400 135/145/140 4.3
750 @ 120V 3000/4000/5000 90 11700/12850/12400 125/140/130

1. Wattage and lumen output may vary by +/-8% due to LED manufacturer forward volt specification and ambient temperature.
2. Lumen values based on photometric tests performed in compliance with IESNA LM-79.

Predicted Lumen Depreciation Data

 Ordering Codes Ambient LED Current Driver Output Current Lumen Maintenance @
L70 per TM21 1,2
Temperature °C mA mA 60,000hrs

GC60-SCT-G2-SM-5-10-BZ 25°C 104 1300 >60,000 hrs 85.8%

GC90-SCT-G2-SM-5-10-BZ 25°C 100 2000 >60,000 hrs 85.8%

1. L70 is the predicted time when LED performance depreciates to 70% of initial lumen output.
2. Calculated per IESNA TM 21-11. Published L70 hours limited to 6 times actual LED test hours.

Accessories (order separately)

 Ordering Code Description

Garage & Canopy

GC60/90-MH10
DualSelect Controller
Remote
Controller

Stonco_GarageCanopy_DualSelect_SpecSheet 07/21 page 1 of 3

 GC LED Garage & Canopy DualSelect Luminaire
60W and 90W
242mm±5mm
(9.52”± 0.2)
Dimensions 316mm±5mm
(12.44”± 0.2)
242mm±5mm
(9.52”± 0.2) 83mm±5mm
316mm±5mm 60W
(9.52”± 0.2)
(12.44”± 0.2)
242mm±5mm
(9.52”± 0.2) 110mm±5mm
83mm±5mm (12.44”± 0.2)
(9.52”± 0.2)
316mm±5mm
242mm±5mm (12.44”± 0.2) 110mm±5mm 90W
(9.52”± 0.2)
(12.44”± 0.2)
316mm±5mm
(12.44”± 0.2)

60W 90W Approximate Luminaire Weight

60W: 5.29lb (2.4kg)
90W: 9.92lb (4.5kg)

Specifications
Housing and Heat Sink Type V symmetric distribution, optimized for target Finish
Single piece die cast Aluminum alloy. Housing lumens and a superior lighting uniformity. Fade and abrasion resistant, electrostatically
also acts as a heat sink, designed to ensure applied, powdercoat textured bronze finish.
high efficacy and superior cooling by natural Driver
convection. Air flow pattern always close to 120-347V electronic driver, operating range LED Products Manufacturing Standard
LEDs and driver optimizing their efficiency and 50/60Hz, Class 2. The electronic components sensitive to
life. Product does not use any cooling device with
electrostatic discharge (ESD) such as light emitting
moving parts (only passive cooling). Other Integrated Features diodes (LEDs) are assembled in compliance with
Surge Protection: Each luminaire is provided as EC61340-5-1 and ANSI/ESD S20.20 standards so
Mounting as to eliminate ESD events that could decrease the
standard with 4kV surge protection.
Die formed steel plate is supplied for mounting to a useful life of the product.
recessed or surfacemounted 4” (10.16 cm) junction Integrated Motion and Daylight Sensor
box (by others) – flush ceiling mount to a recessed Certifications and Compliance
junction box, or direct mount to a surface- Equipped with an integrated Motion and Daylight
Sensor, controlled by a remote hand-held cULus Listed for Canada and USA. DesignLights
mounted junction box. Integral hanger on the plate
programming device (GC60/90-MH10) not Consortium qualified. Entire luminaire is rated for
supports the luminaire during wiring. Single screw
included in the fixture. Information in Page 3. operation in ambient temperature of -40°C (-40°F)
secures luminaire for quick and easy installation.
Sensor Default Setting: up to +40°C (+104°F).
Lens 60W
Hold-on time: 5 min, Dimming level 50%, Stand-by IP65 Rating
UV stabilized polycarbonate lens with extruded
time: 5min, 150lux (active motion sensing), Daylight Entire luminaire including light engine and driver/
silicone gasket surrounding the entire perimeter
priority, 100% detection area. electrical compartment IP65 rated.
of the LED light engine and electronics
compartment providing an IP65 seal. Lens secured 90W
with tamper-resistant screws. Limited Warranty
Hold-on time: 5 min, Dimming level 50%, Stand-by
time: 5min, 150lux (active motion sensing), Daylight 5-year limited warranty. See signify.com/
Light Engine priority, 75% detection area. warranties for details and restrictions. Visit
our eCatalog or contact your local sales
Composed of 3 main components: LED Module /
Hardware representative for more information.
Optical System / Driver. Electrical components are
RoHS compliant. All exposed screws shall be stainless and/or
corrosion resistant and captive. All seals and
LED Module sealing devices are made and/or lined with EPDM
Selectable Color temperature: 3000K, 4000K and and/or silicone and/or rubber.
5000K. CRI 70.

The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract.

Optical System

Stonco_GarageCanopy_DualSelect_SpecSheet 07/21 page 2 of 3

 Garage & Canopy
GC60/90-MH10
MH10 hand-held wireless

Remote Control

Remote Control Setting Button Remarks

Press the “ON/OFF” button, the light goes to constant on/off
mode, sensor is disabled, Press “Reset” “Auto mode” button to
quit from this mode and the sensor starts to work.

Press the “Reset” button, all parameters are same as setting of DIP
switch or factory settings.
Press the “Sensor motion” button, the light quits from the constant on/off
mode, and the sensor starts to work (The latest setting stays in validity)

Press the “Dim Test” button, the 1-10V dimming works to test
whether the 1-10Vdc dimming ports are connected properly. After
2s, it returns to the latest setting automatically.

Long press 3s, Daylight priority mode will be switched to daylight

threshold mode, lux value will go back to previous one.

Short press “DIM+/DIM-” button to Set the output lumen

level, each press will 2% light level

Long press >3s, sensor will be switched to daylight priority

mode; if preset daylight value is Disable, press DH Mode can not
start daylight priority mode.

Spec Detection Hold Stand-by Stand-by Daylight Induction

Options Area Time period dim level Sensor model
QS1 100% 5min 10min 10% 30Lux Hs
QS2 100% 10min 30min 10% Disable Hs
QS3 100% 20min 30min 10% Disable Hs
Note: Detection area / Hold time / Stand-by period / Stand-by dim
level / Daylight sensor can be adjusted by pressing the corresponding
button. The latest setting will stay valid.
Press the “TEST 2S” bottom can enter the test mode any time. At the
mode, the sensor parameters as below: Detection Area is 100%, Hold
Time is 5s, Stand-by Dim Level is 10%, Stand-by Period is 0s, daylight
sensor disable.
This function only for testing. Quit the mode by pressing “RESET” or
any other function buttons.
Press “HS” button to set the detection area to be high sensitive.
Press “LS” button to set the detection area to be low sensitive.
The adjustment bases on the “Detection Area” parameter you set.

Daylight Sensor
Set up daylight threshold:
5Lux/15Lux/30Lux/50Lux/100Lux/150Lux/Disable

Stand-by period
Set up stand-by time: 0S/10S/1min/3min/5min/10min/30min/+∞

Hold time
Set up hold time: 5S/30S/1min/3min/5min/10min/20min/30min

Stand-by dim level

Set up stand-by dim level: 10%/20%/30%/50%

Detection Area
Set up detection area: 25%/50%/75%/100%

Remote Distance
Toggle button can set the remote distance of remote control and
sensor.

© 2021 Signify Holding. All rights reserved. The information provided herein is Signify North America Corporation Signify Canada Ltd.
subject to change, without notice. Signify does not give any representation 200 Franklin Square Drive, 281 Hillmount Road,
or warranty as to the accuracy or completeness of the information included Somerset, NJ 08873 Markham, ON, Canada L6C 2S3
herein and shall not be liable for any action in reliance thereon. The information Telephone 855-486-2216 Telephone 800-668-9008
presented in this document is not intended as any commercial offer and does
not form part of any quotation or contract, unless otherwise agreed by Signify. All trademarks are owned by Signify Holding or their respective owners.

Stonco_GarageCanopy_DualSelect_SpecSheet 07/21 page 3 of 3 www.stonco.com